Painted by former internee in Loveday camp, thought to be Ludwig Winter, and given to Mrs. Gillies. Winter, was interned from Persia, and on his release, obtained a position as Electrical Engineer at the Kyabram Cannery.Oil painting in plain cream chamfered timber frame. Man in foreground with hut, high peimeter fencing and guard tower.Niltatura, loveday internment camp, ludwig winter, illustrations, oil

Yields information about the stringing of the overhead for various temperatures and span - would have been used in the field.Duplicate copy - Memo from Electrical Engineer to General Superintendent, dated 26/3/1939, giving "Electric Railway" stringing tables for 3/0 grooved wire on 40 and 80 for spans, against given temperatures. Has initials ET/MB/LH in bottom left hand corner. Copy to Electrical Superintendent.trams, tramways, overhead, trolley wire

These photographs are a pictorial and historical record of the photographer, Ronald George Thorn, of his days as an engineer with the SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one man's involvement in the construction of the Kiewa Hydro Electric Scheme during his employment with the State Electrical Commission of Victoria.A foolscap sized sheet of lightweight cardboard with 10 small black and white photographs on both sidesNumber 3 is handwritten in ink on a small square of white paper and adhered to the top centre of the sheet. On the reverse side, the number 4 is handwritten in ink and adhered to the top of the sheet.photographs, secv, engineer

These photographs are a pictorial and historical record of the photographer, Ronal George Thorn, of his days as an engineer with the SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one man's involvement in the construction of the Kiewa Hydro Electric scheme during employment with the State Electricity Commission of Victoria.A foolscap sized sheet of lightweight cardboard with 8 small black and white photographs adhered to sheet 5 and on the reverse side (sheet 6) there are 7 small black and white photographs.Number 5 is handwritten in ink on a small square of white paper and adhered to the sheet with sticky tape. On the reverse side is the number 6, also handwritten in ink and adhered with sticky tape.engineer, kiewa, secv

These photographs are a pictorial and historical record of the photographer, Ronald George Thorn, of his days as an engineer with SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one mans involvement in the construction of the Kiewa Hydro Electric Scheme during his employment with the State Electricity Commission of Victoria.A foolscap sized sheet of light weight cardboard with 3 photographs (black and white) adhered to sheet 7 and 8 black and white photos adhered to sheet 8. Number 7 is handwritten in ink on a small square of white paper and adhered to the page by sticky tape. Number 8 is also written as above and adhered to reverse side.engineer, kiewa, secv

These photographs are a pictorial and historical record of the photographer, Ronald George Thorn, of his days as an engineer with SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one man's involvement in the construction of the Kiewa Hydro Electric Scheme during his employment with the state Electrical Commission of Victoria.A foolscap sized sheet of lightweight cardboard, brown in colour, with 8 small black and white photographs on page 9 and 4 small photos on page 10.Number 9 is written in ink on a small square of white paper and adhered to the page with sticky tape. The number 10 is also written on a small square of white paper and adhered to the reverse side with sticky tape. kiewa area, engineer, photographs

Charles Todd was one of the pioneers of meteorology in Australasia. Sir Charles Todd (1826-1910) was an astronomer, meteorologist and electrical engineer. Much of the history of astronomy, meteorology and telegraphs in South Australia is contained in his reports to parliament between 1856 and 1900.This is a useful research tool.A large sheet of lined card with a printed alphabetical list of South Australian towns and hand-written details of wind direction and force. Beside each is a remark.meteorology-records-south-australia todd-charles

Printed extract - four pages 35 to 38 of an paper printed in Electrical Engineer and Merchandiser, May 15, 1954 titled "Problems in Passenger Transport in City Streets", by Robert Risson. Presented originally to Melbourne Division of the Institute of Engineers 13/4/1954. Pages contained with in a manila folder and marked "Problems in Passenger Transport in City Streets" - (Extract from Electrical Engineer and Merchandiser - 15/5/54). Looks at transport in Melbourne, its history, trams vs trolley buses vs buses, track costs, tram carrying capacity vs its cost vs buses, labour costs, traffic congestion, car parking, costs and fares, peak loads and staggering of hours. Has a graph showing passengers arriving or departing in peak hours and impact of staggered hours.On front cover of folder - the AETA stamp and library number in red "4J14"trams, tramways, melbourne, traffic control, mmtb, public transport

Article provides the operating background to the new type of bogie car then being built for the MMTB. Gives the design basis of the tram and has a side elevation of the tram. This type was known as the "W class" tramcar. Refers to the Electrical Engineer (item 6922) as the source of the drawingYields information about the Melbourne W class tram in 1925.Photocopy of an article titled "Melbourne adopts three-door car as standard" from the Electric Railway Journal of the USA, Vol 67, No. 10, page 402. tramways, tramcars, mmtb, melbourne, w class, design of new trams

This honour board commemorates Victorian Postmaster General's Department workers who served in the First World War. A total of 3,726 employees of the Postmaster General's Department enlisted in the Australian Imperial Force during the First World War. This represented about one in every five of the total number of men employed by the Department. Many other employees volunteered, but were rejected for health or other reasons, whilst men in key positions could not be spared. This board was displayed at the Spirit of ANZAC Centenary Experience, Melbourne, in February 2016.This honour board was produced by the Postmaster-General's Department and passed through its successor entities until donation to the National Communications Museum in 2018. Its provenance is further supported by the supplementary photograph (VH256) held by the Museum which shows the board in production. The board provides a comprehensive list of the names of Postmaster-General staff across various departments, constituting an important resource for genealogical or social history researchers and a focal point for remembrance by fellow communications workers. The style of the board itself is rare, as it was an unusual practice for honour boards to be hand-lettered on paper.Handpainted paper on linen honour board, perspex glazed with a wooden frame."POSTMASTER GENERAL'S DEPARTMENT / VICTORIA" "ROLL OF HONOR / 1914 1918" "FOR / GOD / KING / AND / EMPIRE"|Headings that precede list of names: "CORRESPONDENCE / BRANCH" "CENTRAL EXCHE" "SUBURBAN AND COUNTRY / POST OFFICES" "TELEGRAPH / BRANCH" "ELECTRICAL ENGINEER'S BCH" "MAIL / BRANCH"pmg, postmaster general's department (pmg), world war 1, ww1, postal workers, honour boards, first world war

Carbon typed copy of a technical procedure - 3 pages "Rectifier Protection" gives details on cell failures, surge voltage protection, bridge circuits, over current and provides four figures to illustrate the paper. Written D.B. Corbyn and N. L. Potter in a paper to the Institute of Electrical Engineers London. Not dated. Assumed mid 1930's. BTPS Number "216". "216" in ink on left hand bottom of first pagetrams, tramways, electrical engineering

These photos are a pictorial and historical record of the early construction days of the Kiewa Scheme and a personal record of the photographer, Ronald George Thorn, of his days as an engineer with the SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 - 56 as an electrical engineer grade 2.These photographs tell the story of one man's involvement in the construction of the Kiewa hydro electric scheme during his employment with the SECV.A foolscap sized sheet of light weight cardboard with nine small black and white photographs pasted on side 1 and eight same sized black and white photographs pasted onto side 2. The number 1 is handwritten in ink on a small square of white paper and adhered to the top of the sheet. On the other side of the sheet is number 2, handwritten in ink on white paper and adhered to the top of the sheet with sticky tape. secv, engineer, kiewa

The Institution of Electrical Engineers (IEE) was established on 17 May 1871. The first meeting took place at 2 Westminster Chambers, Victoria Street SW. Those present were Wildman Whitehouse, Capt P.H. Colomb, Maj. R.E. Stotherd, Louis Loeffler, Capt Weber, Capt Malcolm, Robert Sabine, Frank Bolton. Gold paper covered magazine with black print. 239 pages including numerous advertisements. Articles of this centenary edition include: A Human Entity (Lord Nelson of Stafford), Yesterday's Men - providing for tomorrow ((A.G. Woodruff), A century of Development in the Supply Industry (Stanley Brown), British Broadcasting and the IEE (J. Redmond), Telecommunications - the grassroots of the IEE (R.J. Halsey), Engineers, physicists and mathematicians (J.A. Ratcliffe), The IEE Wiring regulations (E.E. Hutchings). The IEE and education (John Brown), Electrical Engineering today and tomorrow. Images include Oliver Lodge, James Maxwell, Crookes shadow tube, Deptford Power Station, John Hopkinson, Marconi, William Thomson, Oliver Heaviside, experimental 3-phase, Belling Modernette, Savoy Hill, power lines, Brighton Power Station, BBC Television Centre London, mobile telegraph office.generators, institution of electrical engineers, iee, wildman whitehouse, ph colomb, re stotherd, louis loeffler, robert sabine, frank bolton, multimeter, power units, oscilloscope, bell and howell

Document. Flyer for New Vaudeville Co. Masonic Hall, Bendigo. Advertisers. Kalma - Photographer. Prince Cerio - Gypsy Palmist. Bright's - Fish Shop. Hamburger - Watchmaker. Ernest R.Jones and Co - Agents. B. Sluyterman - Electrical Engineer. Hartley Cycles. A. Frigerio - Wire Works. Davey Bros - Saddlers. Her Majestry's Hotel. C.Plumbe - Tailor. Barnett's - Money Lender. W.A.Parker - Hairdresser and Tobacconist. Metropolitan Hotel.performing arts, elocution, theatre flyer

Newspaper Clipping from a Melbourne newspaper, 24/3/1973 about the construction of a new trams for Melbourne. Has a photo of the Minister for Transport, Mr. Wilcox and Mr. S. Bramich, an electrical engineer at Preston with a model of the prototype and 1041 under construction in the background. Quotes Mr. Kirby that the Board would like to recruit women drivers, the recent approval to call tenders for the construction of 100 new trams."24/3/73" in red ink in top right hand corner.trams, tramways, mmtb, women drivers, new trams, preston workshops

Beret, black felt with reinforced black hat band, 2 air vents RHS & back. Silver RAEME (Royal Australian Electrical & Mechanical Engineers) badge in front.costume-male, headwear, military history - army, raeme, passchendaele barracks trust

Arthur D. Senior was born on 13 November 1905 at Colac, Lancashire, England. He came to Ballarat in 1927 and was a student, and later a part time evening instructor in Electrical Mechanics, at the Ballarat School of Mines. An electrical engineer at the Electricity Supply Company (Ballarat), he retired from part time work at the Ballarat School of Mines in 1965 having started in 1931.Photographic Portrait of Arthur Senior wearing a Ballarat School of Mines blazer.ballarat school of mines, arthur donald senior, arthur senior, blazer

Book - 9 sections, 140 pages + covers, stapled and bound within dark green covers, issues by the USA Department of Commerce, Technological Papers, Bureau of Standards, No. 52, "Electrolysis and its Mitigation", 2nd Edition 1918, price 35 cents. Has index and looks at various aspects of Electrolysis and railway negative returns. Has authors of E. B. Rosa Chief Physicist and Burton McCollum, Electrical Engineer of the Bureau of Standards.On bottom of cover has "Peter G. Tait 90 William St Melbourne" label. and on top edge "Recd 4/10/19" in ink.trams, tramways, tramways, electrolysis

White dress jacket for Sergent from Vietnam war. Royal Australian Electrical and Mechanical Engineers RAEME

Royal Australian Electrical and Mechanical Engineers stable belt. Dark blue in colour with red and yellow stripe.Motto on buckle ARTE ET MARTE with badge of RAEME.

Megger as the device was called, is in fact its brand name. It is a device that supplies a DC (direct current as per car batteries) voltage to enable testing of electrical apparatus. This particular device produces 250volts DC when the handle is turned vigorously. If an electrical device, such as a kettle or toaster, blew a fuse or tripped a circuit breaker, when switched on, then it must be checked electrically before any more use. Following the repair of the faulty item a megger would be used to check if either of the AC 240volt plugs leads were touching the metal case (earth). The output leads of the megger would be connected with one to the earth (metal case) and the other to each of the power connections in turn. A good megger reading of 50,000 ohms (resistance) would enable the device to be returned to service. A reading of zero ohms resistance would mean that it would again blow a fuse, and was therefore unsafe to use. In the electrical industry e.g. the former State Electricity Commission, a megger would be used to test lots of similar item in sequence. Because of the vigorous job of winding the handle, two persons were often used to save time. One would crank madly whilst the other shifted the leads. This particular megger is of a small voltage, but other meggers are bigger and have a few ranges of DC voltages able to be selected. The optimal megger for large Generating machines was motor driven megger. This was applied to the device being tested for a duration of approximately 30 minutes with reading of the resistance taken at regular intervals.All equipment belonging to the State Electricity Commission of Victoria was labelled with a metal plaque attached to it. The SECV constructed the Kiewa Hydro Electric Scheme in the Upper Kiewa Valley and on the Bogong High Plains. The scheme began in 1938 and finished in 1961 when this megger was used and also possibly later as the SECV remained to maintain and operate the Scheme. This megger is of significance in relation to the advancement of technology.A rectangular box in dark brown bakerlite casing. It has an agent's plaque fixed to the left of the face and on the right is the marker's recessed stamp. In the middle in a transparent window so the level of ohms can be read. The front also has two recessed fixing knobs in black. On one side is a crank handle with a knob that lifts up and is turned vigorously to create the voltage. The back has four recessed screws and four small leather pads. There is a hole on each side to insert wires. There are two copper insulated wires. The SECV Plaque states: State/Electricity Commission/of/Victoria/ Electrical Engineer's Section/ No.1747 The Agent's Plaque states: H. Rowe & Co. Pty Ltd/Melbourne & Sydney/Sole Agents/in Australia for/Evershed & Vignoles Ltd Maker's states: 500 volts/Megger/Regd Trade Mark/Made in England/Patent No/400728electrical meters, electrical equipment, fuses, safety, state electricity commission of victoria, mt beauty, bogong village

Single page copy of page 234 of the "Electrical Engineer and Merchandiser, October 15, 1949", titled "News of the Month". Reports on the recommendations of a report by H.H. Bell of the MMTB for trolley bus system to replace the existing tramways in Ballarat at an approx. cost of 198,000 pounds. Also reports on the MMTB Annual report for 1948/49 and the SEC installing FM radios into motor vehicles in the Midland area's patrol cars. Not know who made the copy or when. Images of document added 27-08-12.Has word "Bill" and an arrow in the top left hand corner.trams, tramways, ballarat, trolley buses, sec, mmtb

Charles Howard Beanland, Dip E.E. (SMB), M.I.E. Australia, M.A.C.E. Born 31 March 1902 at Ballarat Educated at the Ballarat School of Mines (later Federation University Australia) where he gained a Diploma of Electrical Engineering. Charles Beanland was later Principal at Footscray Techncial College (1951-1967) Electrical Engineer, Charles Beanland, was the foundation president of the Melbourne Branch of the Ballarat School of Mines Past Students' Association in 1928. Photographic portrait of Charles Beanland.charles howard beanland, charles beanland, ballarat school of mines, footscray technical college, past students' association, electrical engineering, alumni

Instruction - 12 off white or light brown pages + white cloth card cover centre stapled titled "Supplement to the Book of Instructions re the working of the St Kilda and Brighton Electric Street Railway, dated 1/1/1915". Gives changes to a previous issued rule book, bell signals, air brake orders, operating orders, operation while running and instructions cancelled. Issued under the name of W. Stone Chief Electrical Engineer and T. B. Molomby General Superintendent of Transportation.trams, tramways, victorian railways, vr, st kilda brighton, rules, employees, safeworking

This is the first edition of the book, printed in 1899. It has since been reprinted with slight corrections in January 1900 and with correction in 1902. It is a text book and reference book based on the study of steam, gas and oil driven machinery of the late 19th and early 20th century. The author, John Perry D. Sc., F.R.S., was born in 1850 and passed away in 1920. He was a Professor of Mechanics and Mathematics in the Royal College of Science, Vice-President of the Institution of Electrical Engineers, and Vice-President of the Physical Society. This book has significance as the First Edition of the book, published in 1899. The book is significant to the history, understanding and evolution of power driven machines. The principles apply to the machinery of the late 19th to early 20th centuries. The Steam Engine and Gas and Oil Engines: a book for the use of students who have time to make experiments and calculations Author: John Perry D.Sc., F.R.S. Publisher: Macmillan & Co Ltd, London Printed by Richard Clay and Sons, Limited, London and Bungay This is the First Edition of the book, printed in 1899 A hard cover book, red linen with black print. The Preface is written by the aughor on 22nd February 1899. The book contains many diagrams and tables as well as having reference numbers on many paragraphs in the chapters.Pencil on front endsheets "SJ 9""Rec. 371 a" Stamped in purple , front endsheet "F. ST. G. D. HOLYMAN" "L.4." Handwritten in ink "Richard G ---- / Liverpool --- P---ye"warrnambool, shipwrecked-coast, flagstaff-hill, maritime-museum, shipwreck-coast, book, the steam engine and gas and oil engines, john perry, reference book, scientific book, steam engines, gas engines, oil engines, combustion engines

The Civic Centenary Thanksgiving Service was held at Holy Trinity Church, Port Melbourne on Sunday 10th July 1960 at 7pm. It was attended by His Worship the Mayor, and the Mayoress, Cr. L.S. TURNER and Mrs TURNER. Councillors who attended included Town Clerk, Mr A.T. AANENSEN, the City Engineer Mr. G.S. WILLIAMS and the City Electrical Engineer Mr J.T. ANDERSON and their ladies. The address was given by the Rev Lawrence E. STYLES, Industrial Chaplain to the Archbishop of Melbourne.Half A4 yellow 8 page booklet for the City of Port Melbourne Centenary Civic Thanksgiving Service.celebrations - centenaries, local government - city of port melbourne, religion - anglican (holy trinity), leslie stanley turner, mrs turner, andreas (andy) t aanensen, g s williams, j t anderson, lawrence e styles

This testing voltmeter recorder was last certified by SEC Vic laboratories on the 17/4/77. It was used extensively as mobile recorder placed for periods of one month at locations experiencing unacceptable fluctuations of power. These locations would cover the North East regions of Victoria. They cover voltage drops at domestic and business properties especially those that were experiencing regular fluctuations(daily) at approximately the same time of the day. As the electrical network is required to operate within a set level of voltage, fluctuations outside of this has to be investigated and necessary remedial action taken. This is especially so for rural properties where power "drainage" can occur through animal/bird and tree interference. It can also be the result of defective wiring and overloading at peek operational times (milking machines).This mobile voltage recorder is very significant to the Kiewa Valley because it highlights the difficulties that can occur in maintaining a power supply that experiences fluctuating power demands by the rural industries that it supplies. The requirement of a mobile testing apparatus to cover the various sections in the Kiewa Valley and other rural areas in the northeast region is one of necessity as electricity once connected to a rural property is a labour saving supply as generators on rural properties require a higher degree of maintenance an ultimately at a higher cost. The testing of the SEC Vic supplied electricity to rural properties,those who had previously run on generators, had to be quick and unassuming with certainty of correct supply levels.The mechanism of this voltage recorder has been installed(by the manufacturer) into its own protective wooden box. This box has a front (swing open) lockable section which permits direct access to the installed measuring equipment (for servicing and data collection). The top section of the box has two screw on terminals for access to the machine being tested. This tester has its own inbuilt ink supply facilities and a mechanical clockwork device that unwinds a roll of paper onto a second roll at a rate of 10 mm per hour. The recording chart is marked with time slots against voltage. There is a recording arm which has an ink pen at the end. Both arm and pen carry the ink supply from the ink reservoir, located on the left side of the cabinet door in specially constructed bottle holder( three small bottle capacity). To record a suspect power problem to a home or business establishment the voltmeter is connected to a power supply outlet being tested and wind the recording clockwork mechanism (gives a four week running time). Before leaving the recorder in situ the electrician checks to see if the chart is recording the correct voltage and that the clock mechanism is advancing correctly.On the front of the access "door" at the top a metal label "RECORDING AMMETER" below this "MURDAY SYSTEM" below this "ALTERNATING CURRENT" and below this the manufacturer's registered number "No. 139156" Below this is a metal tag with State Electricity Commission of Victoria Electrical Engineer's Section equipment number "338" Below these tags and above the viewing window is the manufacturer's dtails "EVERSHED & VIGNOLES Led LONDON"sec vic kiewa hydro scheme, alternate energy supplies, alpine feasibility studies temperature, rainfall, power outages

Possibly WW2Royal Australian Electrical and Mechanical Engineers Artificer Badge. Metal badge is mounted through an aluminium metal plate and secured with clipsNil