Specimens labelled: 1: C.B. Incandescent Mantle O.M. 1900.

In 1902, William E Sessions and other family members purchased a controlling interest in the E.N. Welch Company, a clock manufacturer located in Forestville, Connecticut. Sessions' father owned a foundry located in the town of Bristol, Connecticut that produced cases for E.N Welch Co. On January 9, 1903, the company was reorganized and registered as The “Sessions Clock Company”. Within a few years the Sessions Clock Company was producing clock movements, cases, dials, artwork and castings for their line of mechanical clocks. Between 1903 and 1933 Sessions produced 52 models of mechanical clocks, ranging from Advertisers, large and small clocks with logos of various businesses, to wall, or regulator clocks, and shelf or mantel clocks, designed for the home. Many of the Session clocks from this period are prized by collectors. In 1930, the company expanded to produce electric clocks and timers for radios, while continuing to produce traditional brass mechanical movements. Beginning at the end of World War II Sessions W Model (electric) was widely used by various casting companies for their clocks. The dial of the W Model read Movement by Sessions. In the early 1950s Sessions begin to produce timers for television. In 1956, Sessions was absorbed by a company interested mainly in their timing devices. In 1959, William K. Sessions, grandson of William E. Sessions left the Sessions Clock Company and formed the New England Clock Company. In 1960, one of the Sessions Clock buildings was sold to the Bristol Instrument Gears Company. Kept as the Sessions Company, the new owners ran the operation until 1969 when changes in the market forced the Sessions Company into liquidation. In 1970, the remaining buildings were sold to Dabko Industries, a machine parts manufacturer.The item marks a time when clock production in America was at it’s peak producing clocks for sale in many countries, they were keenly priced, mass produced and available to all. The company had a relatively short life span life regards clock manufacture later diversifying into electric timer mechanisms. Yet it was perhaps inevitable with the advent of electricity along with stiff competition from other clock manufactures that would ultimately herald the end in 1935 of the Sessions company's ability to continue manufacturing mechanical clocks. Clock mantle type face set in a painted black case designed to represent a Greek building with gold decorative pillars. Free standing with decorative feet. No markings or inscriptions on clock case or mechanism flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sessions, mantel clock, clock, clock industries

C1970's doll house used in a community toy libraryC1970's toyPlastic, mostly yellow; Coloured transfer decoration; 2 storey house with garage; 4 dormer windows; Plastic furniture; Plastic people; Carry mantle. Fisher Price play family Housedoll house, toy, c1970s, nunawading toy library

http://en.wikipedia.org/wiki/File:Tilley-storm-lantern-X246-May- Tilley storm lantern, this model has been in production since 1964 The Tilley Lamp derives from John Tilley’s invention of the hydro-pneumatic blowpipe in 1813 in England. http://en.wikipedia.org/wiki/Kerosene_lamp#Pressure_lamp Pressure lamps are far more sophisticated than wick lamps and produce a much brighter light, although they can be quite complicated and fiddly to use. This type of lamp is commonly known in the UK as a "Tilley lamp", after a manufacturer of the same name, and in North America as a "Coleman lantern" for similar reasons. A kerosene blowtorch displaying the various aspects of the kerosene burnerA pressure lamp has a fuel tank at the bottom with a small pump to pressurise the kerosene. There is a narrow gap up to the top of the lamp, called a flue, and at the top of the lamp there is a burner (gas outlet). Directly underneath the burner is the mantle, a fabric bag coated with chemicals that incandesce when heated by the gas flame. The burner lamp is known for its brightness. It is so bright because of the amount of pressure that is placed onto the wick. This pressure allows a steady flow of the gasoline and a constant light Tilley Storm Pressure Lantern, model no x246 has a stainless steel base which is filled with kerosene, with a pump used to pressurize the kerosene vapor. Under the base is a sticker.On top is a black hood with vents which sits on the glass heat resistant shade. The glass shade has an etched label. It has a white and pink mantle on the central rod with a long shaped stainless steel handle, this folds down when not in use.Base - Sticker Tilley Lamp Model X246 Etched on glass shade Tilley, Durosil, ITI, Heat Resistant. Made in Englandlantern tilley pump pressure mantle kerosene methylated spirits stainless steel lamp kerosene lamp round glass cylinder

Gas lamps worked by heating something called a 'mantle' with a gas flame. The mantle then glowed brightly, lighting up the room. Lamps had either two chains, for a ceiling-mounted lamp or a tap for a wall-mounted burner to turn off the gas. These chains or taps could also adjust the flow of the gas and hence the brightness of the mantle. Before Carl Auer von Welsbach invented the gas mantle in the 1890s, all gas lights in homes and street lights had simple gas jets that pointed upwards. In the home, these lights were covered with glass globes and had an overall ornate look making the lamp ascetically pleasing and protecting the flame from being blown out. However, this arrangement was extremely inefficient: To get as much light as possible, the gas had to be turned fully up, resulting in large sheets of flame rising towards a ceiling. Also, because the lamp had to be point upwards, the illumination was directed upwards, i.e. at the ceiling rather than where it was needed. So the usable light for a given amount of gas was minimal but the invention of the gas mantle eventually changed this. It enabled gas lights to have a small flame and to direct their light downwards. The item is significant as it is part of a very ornate gas lamp wall bracket from the late 19th to early 20th century. Its provenance is currently unknown and at this time cannot be associated with a historical event, person or place and the item is assessed as a collective asset.Gas lamp wall bracket; part of a gas lamp. A single burner fancy wall mounted bracket, brass, ornate and decorative, featuring a Lamassu - figure with the body of a lion , wings of an eagle and human head. It was recovered from the wreck of the Loch ArdNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, gas lamp, brass lamp, gas burner bracket, domestic artifact, gas lighting, gas lamp bracket

This item is part of a larger collection donated to the Kew Historical Society by Anna French. The collection includes personal items from the donor's family, as well as items given to the donor and her mother by a family friend, Lucy Merritt (Jean) Hornby. The item is from that part of the collection inherited or assembled by Jean Hornby. The collection is significant given Jean Hornby's mother's descent from Robert Hornby (1854-1935) and Eva Merritt (1865-1959); her mother the chid of a family who settled in Kew in the 1850s, this providing a chain of provenance for items dating to the mid-nineteenth century, when her maternal forebears arrived in Melbourne. Other items represent Jean Hornby's contribution to her local and wider community.The items as created are representative and fine examples of late Victorian and or Edwardian needlework. While many such items were copies of published patterns, these may be original designs. Two mantle or pelmet decorations, with hand embroidered arum lilies on delustred satin backed onto canvas. One pelmet is slightly longer than the other, but each has the same number of bobbles on the trim. hornby family, families -- kew (vic.), jean hornby, soft furnishings, decorative arts, embroidery

This clock was originally in the front Office of the Soldiers Memorial Institute Bendigo on the mantlepiece of the fireplace. Original donor or date of being placed is unknown. It was last used in 2005 by Jack Barnes OAM who wound it every day he was in the Office, he was Secretary for 43 years of the BRSL. After the renovations to the SMI in 2016 - 18 it was placed on the mantlepiece of the fireplace in what is now called "The Building and RSL History Room"Mantle Piece Clock, timber frame, hinged glass cover over the face is missing, numbers are 1 - 12 on clock face, rear door to the mechanism, a pendulum weight is taped to the inside, no wind up key.On Clock face, "Gilbert". Around clock face, "Made in Winsted Conn United States of America"brsl, smirsl, mantle

Portland Post Office Clock. Case is apparently new.Large mantle clock made from dark wood. Front door has a large glass pane with roman numerals in gold affixed to interior of glass. Brass arms and some of workings of clock visible through the door.Front: PORTLAND ROTARY CLUB INC. This original Portland Post Office clock, dated 1882, was fully restored and presented to the Portland City Council by Rotarian Norm Middleton on 20 September 1993. (metal engraved plaque affixed to front). Back: (unknown)portland rotary club, portland post office, mantel clock, horology

The 1920 Club agreed to have a working bee at Wanliss House to remove fittings for sale from the house before it was demolished. This program was found down behind the mantle of one of the fireplaces. Discoloured and torn fragment of the Ballarat College1870 Speech Day program Front: Ballarat College crest / SPEECHDAY / Christmas 1870 / Hall fo the MECHANICS' INSTITUTE / ON / FRIDAY EVENING, DECEMBER 16th / AT HALF-PAST SEVEN O'CLOCK / The Rev William henderson in the Chair / Admit the bearer / R O McCoy PRINCIPAL / EVAN BROTHERS PRINTING.... Verso: PROGR.... / read R.... / Song - By the whole school / Recitation / 'John Maynard' S Garman ...J MacNeil /Solo Piano / 'La Zingara' B Richards...H Crawcour / Recitation Humurous / 'The farmer and the counsellor' H Smith...Eastwood / Duet piano / 'Soldier's Chorus B Richards... and G W Adam / Re..T.. "Shiel's celebrated reply to...J Nicol / Song / 'Constantinople' A lloyd...J D Croker / Recitation / 'Our Gallant Volunteers ...Mackay...Mont Rowe / Distribution of Prizes henderson, mccoy, j-macneil, h-crawcour, eastwood, g-w-adam, j-nicol, j-d-croker, mont-rowe

The kerosene lamp is a type of lighting device that uses kerosene as a fuel. Kerosene lamps have a wick or mantle as light source, protected by a glass chimney or globe; lamps may be used on a table, or hand-held lanterns may used for portable lighting. There are three types of kerosene lamp: traditional flat wick, central draught (tubular round wick), and mantle lamp. The screws on the side adjust the flame and hence the strength of the flame produced. Prior to the introduction of gas and electricity these lamps provided lighting in all householdsPioneers and early settlers in Moorabbin Shire relied on kerosene lamps for lighting their homes after sunset.This kerosene, flat wick, banquet lamp has a clear glass shade chimney with a frilled rim, a reservoir of plain yellow glass and a metal engraved base . 1 side screw to adjust the flamelights, early settlers, pioneers, market gardeners, moorabbin, brighton, bentleigh, cheltenham. lamps, kerosene, paraffin, oil

Sign identifying HMAS BENDIGO which was a Fremantle Class Patrol Boat - Decommissioned on 9th Sept 2006. Originally laid down in 1981. Sourced from CPO Graham Lennon.Steel sign silver in colour. "BENDIGO" written in large block green letters. Identification of type of boat written on other side in purple and the No. 304 randomly stamped on back.Front: "BENDIGO". Back: Written in Texta "STB SIDE F/MANTLE CLASS P/B STEP PLATE: GANGWAY. NO. "304" Randomly stamped on back multiple times.hmas bendigo, gangway sign, navy

The kerosene lamp is a type of lighting device that uses kerosene as a fuel. Kerosene lamps have a wick or mantle as light source, protected by a glass chimney or globe; lamps may be used on a table, or hand-held lanterns may used for portable lighting. There are three types of kerosene lamp: traditional flat wick, central draught (tubular round wick), and mantle lamp. The side screws adjust the length of the wick and hence the strength of the flame / light produced. Prior to the introduction of gas and electricity these lamps provided light in households after sunset.Prior to the introduction of gas and electricity these lamps provided light after sunset for the early settlers, as they established their farms and businesses, in Moorabbin Shire.A Victorian kerosene banquet lamp, with a gilded metal quad footed base, cranberry glass oil reservoir with geometric patterns, original etched, yellow, glass globe shade and clear glass chimney. There are 2 side screws for adjusting the flame.early settlers. pioneers, follett w, moorabbin, bentleigh, brighton, ormond, market gardeners, kerosene, paraffin, lights, lamps, candles

The kerosene lamp is a type of lighting device that uses kerosene as a fuel. Kerosene lamps have a wick or mantle as light source, protected by a glass chimney or globe; lamps may be used on a table, or hand-held lanterns may used for portable lighting. There are three types of kerosene lamp: traditional flat wick, central draught (tubular round wick), and mantle lamp. The side screws adjust the length of the wick and hence the strength of the flame/light produced. Prior to the introduction of gas and electricity these lamps were used for lighting in all households after sunsetPioneers and early settlers relied on kerosene lamps for lighting their homes after sunset.A 19th Century kerosene chamber lamp, with clear, plain glass shade and reservoir, circular metal base and 1 side screw for adjusting the flameearly settlers, pioneers, market gardeners, moorabbin, brighton, bentleigh, ormond, cheltenham, candles, lights, lamps, kerosene, paraffin, oil

This is a hurricane lamp, so called because the tall glass dome was designed to protect the flame from excessive draft. These lamps were common in households in the first half of the 20th century ( used for house lighting) and later used for camping and out door activities.This item is retained as an example of type of lighting used in pre electricity times.This is a metal lamp with a glass bowl contained within a metal frame with a handle. There is a mantle inside the bowl. On the metal frame and base are various mechanisms for controlling the flame and a place for filling the container at the bottom with kerosene. The metal is heavily rusted with splotches of paint.vintage lighting, hurricane lamps

An item of this type would have been used for lighting purposes by householders both within and around the house in the 19th and early 20th centuries. It may have originally been attached to a wall or ledge. This item has no known local provenance but is retained as an example of a lighting mechanism some 100 years ago.This is the main body of a kerosene lamp. It is made of metal and the base and back stand have been painted green. It has a mantle, an oil container and a round reflector plate (which has been originally painted silver). The glass bulb is missing.N (?) 23 Victorvintage lighting, kerosene lamps

The Villa Alba Museum is cultural institution committed to the collection, study and display of 19th century interior decorative finishes, and the components of 19th and 20th century interior decoration. Most rooms in this historically and aesthetically significant house have stone (typically marble) fireplaces that are inset with decorative tiles produced by the company of Mintons Ltd in the United Kingdom.Digital photograph of an intact and original 1880s fireplace in the drawing room of Villa Alba. Carved white marble mantle surround. Iron and brass back panel. Cast iron insert. Plain and decorative surround and hearth tiles produced by Mintons Ltd.fireplaces, villa alba - drawing room, mintons, mintons - tiles

Purchased in Bendigo in 1973. Previous history unknown. Provided with laminated account of Sessions clock Co history. Mantle clock black wooden casing with embossed "flourishes" on front base and around the clock face. Fancy gold painted face featuring numbers. Black hands. Detachable back reveals the mechanism. Has key attached inside . In working orderMade in USA on face. Labelled on back, eight day, half hour, cathedral gong, turn back. The Sessions Clock Co successors to the E. N. Welch MFG Co, Forrestville, Conn, USA

In 1880 Melbourne hosted its first major international exhibition the "Melbourne International Exhibition". In 1888 Melbourne hosted its second major international exhibition the "Melbourne International Centennial Exhibition".Two-piece evening dress comprising separate bodice and skirt made of gold-coloured silk damask woven with large curvilinear design in cream. Cream tulle trim around neck embellished with beads and artificial pearls. Similar trim down centre front and around lower edge of bodice. Short puffed sleeves Neckline trimed with wide gold satin riboon and bows. Bodice is boned and fastens centre back with hooks and eyes. Gored skirt pleated into waist. .1 - bodice . 2 - skirtLabel, woven blue on cream, centre back bodice: QUOD FACIMUS VALDE FACIMUS, George & George Ltd / Federal Emporium / Melbourne, International Exhibition Melbourne, Costumes and Mantlesgeorge and george, evening dress, georges of collins street, 1888

This model was part of eleven pieces designed from an almanac in 1892 printed by the Port Fairy Gazette. The panorama was used in the historical Society rooms in Bank Street on an extended mantle piece, before the Museum and Archives relocated to Gipps StreetThis model was made as a part of an eleven piece model of the streetsccape of Port Fairy in 1892. By a local resident of the town.Small hand made model of a shop front from the 1892 almanacA.W. Handricks Saddlerpanorama, model, mewkill, almanac, bank street

In August 1918 was charged with falsely representing himself as a returned soldier. He had previous convictions of housebreaking and stealing. A previous offence in 1916 concerned obtaining a seal mantle under the name of Alfred Barber. He was a recruiting sergeant at Dimboola at the time.Prison record for Alfred Hannah, prisoner registered number 34372, giving details of the prisoner, his crimes and the dates and places of his trials. alfred hannah, alfred barber, english speaking prisoner, housebreaking, war precautions act, false representations, stealing, loitering

This model was part of a panorama of 11 pieces designed from drawings in an 1892 almanac printed by the Port Fairy Gazette. The panorama was used in the Historical rooms in Bank Street on an extended mantle piece before the museum and Archives were relocated to Gipps Street.This model was made as a part of an eleven piece panorama of the streetscape of Port Fairy in 1892. By a local resident.small hand made model of a shop front from the 1892 almanacTailoring Establishment John Sickler Gazette Officemodel, panorama, sackville street, mewkill, almanac, bank street

This lamp has no known history. Lamps such as this one were for indoor use and were essential items in households in the 19th century and the first three decades of the 20th century until electric lighting became common in most households. This item has no known local provenance and will be useful for display as an example of a common household item of the past.This is a lamp with a glass base which is fluted and mostly coloured green. The bowl is clear glass with a concave raised pattern on the base of the bowl. The bowl contains a discoloured white wick. The lighting mechanism is brass with an external knob for controlling the use of the wick. The lamp mantle is bulbous-shaped. social history, history of warrnambool, kerosene lamp

This clock was brought out to Australia in 1849. it was then bought in Ballarat by Samuel Richardson in 1865 and brought to Orbost when he settled there. The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. This clock may have been used as a marine clock. The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. A wooden mantle clock in a rectangular cabinet. It has pendulum striking. The face has blue and gold decorations. the numerals are Roman. The face surround is white and the numerals black.There is a glass door with red,blue and green decorations on the lower quarter. There is a faded printed label behind the clock and pendulum.Scratched onto the back: "To Australia in 1849. Samuel Richardson bought this clock in Ballarat1865"

Small black slate and marble mantle clock with single train movement,pendelum, round white enamel dial with black numerals and hands, brass bezel with bevel edged glass, case of black slate with red marble decoration on front. Donated by Mrs A. Gill, Somerville Street, Bendigo.on movement E793 46horology, clocks, mantle

In 1850 the Ansonia Clock Company was formed as a subsidiary of the Ansonia Brass Company by Phelps and two Bristol Connecticut clock makers, Theodore Terry and Franklin C. Andrews. Terry & Andrews were the largest clock manufacturers in Bristol at the time with more than 50 employees using 58 tons of brass in the production of about 25,000 clocks in 1849. Phelps decided to get into the clock making business to expand the market for his brass, while Terry and Andrews got access to better quality brass at better prices. They had then sold 50% of their business to Phelps and moved the business to Ansonia, Connecticut. In 1877 the clock company purchased a factory in New York and moved most of its production thereafter being spun off from the brass company. Henry J. Davies of Brooklyn, himself a clock maker, inventor and case designer, joined the newly reconstituted company as one of its founders. As President, he is thought to have been largely responsible for the figurine clocks, swing clocks and other unusual and desirable novelties for which the Ansonia firm became known. By 1879, a second factory was opened in Brooklyn, New York and by June 1880 employed 360 workers, while the Connecticut factory continued producing clocks as well with a workforce of 100 men and 25 women. Hence, clocks marked "Connecticut" were generally produced before 1879, while those marked "New York" were all produced after 1880 After the New York factory burnt down in 1880 the company rebuilt the factory on the same site, and reopened the expanded factory in 1881, with a capacity to exceed that of the Connecticut factory which by 1883 had closed. By 1886, the company had sales offices in New York, Chicago and London, with more than 225 different clock models being manufactured. In 1899, Phelps' grandson William Earle Dodge Stokes commissioned architect Duboy to build the "greatest and grandest hotel in Manhattan, New York” which became the city's first air-conditioned building. In 1929 the majority of the timekeeping machinery and tooling was sold to the Soviet government's US trading company Amtorg, just before the stock market crash. The parts, machinery and key skilled workers were shipped out of the USA to form the basis, along with the remains of a watch company purchased a year later, of the clock and watch industry in Moscow such as Poljot and Sekonda. In 1969, the rights to the use of the name, trademarks, and goodwill were transferred to Ansonia Clock Co., Inc., Lynnwood, Washington. The item marks the beginning of mass produced clocks in the United States, cheaply priced and available to all. The company had many innervation's during it’s life regards clock and later wrist watch making that led the way for other companies in many different countries to emulate.Clock, pendulum mantle model. Carved scallop "Ginger bread house" cottage clock. Oak case, white enamel face, floral etched glass door. Clock has an hour bell chime. Glass front opens to allow rewinding. Made by Ansonia Clock Co, New York. Marked "Manufactured by Ansonia Clock Co. New York, USA"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, mantle clock, clock, pendulum clock, time keeper, horology, ansonia, ansonia clock co, america

The kerosene lantern is a type of lighting device that uses kerosene as a fuel. Kerosene lanterns have a wick or mantle as light source. They may be hand-held for portable lighting.This kerosene lantern was used as a light on road works in the Orbost area. It would have been carried/used by one of the road workers. Lamps of this kind were significantroadworks items in their period of use as essential tools to the safe-working operations of the Country Roads Board.. A red metal roadworks warning lantern. It is rectangular with a metal carrying handle. The top is domed. The door at the back is hingedand opens with a small nail. The lamp was lit by kerosene held in a small square tank with a wick.lantern kerosene light lamp

Slide. Bendigo Views. View of a loungeroom. It has a small bookcase with photos on it and a shelf above it with a black mantle clock and a photo on it. There is more shelving with books, photos and a model of a sailing boat on it. There is a cabinet with model aeroplanes, ships and a coach in it. On the top is a larger model of an aeroplane. There are more pictures on the walls. There is a television in front of the bookcase.slide, bendigo, bendigo views, bendigo views