This iron was used by women, in their domestic role, to press the clothes from the mid 19th century. Coal embers were put inside, heating the base of the iron, to press the family's clothes and linen. Small bellows were used to fire up the embers to keep the iron hot. In the Kiewa Valley the embers would have been from the local hard wood growing on the farms.Ron White worked for the SEC on the Kiewa Hydro Electric Scheme. The iron belonged to his mother. Ron remembers being a boy of approximately 8 years of age, watching his mother do her ironing with this charcoal iron in the c1920s.This iron is made of cast iron. It has a hinged lid so that coal embers can be put inside for heat. The lid has a curved funnel. Bellows are used to blow air into the iron and keep the coals burning. It has a wooden handle and a lever (also with a wooden handle) to open the lid. There is a 2 and a half centimetre hole at the back of the iron to check the coals. The hole has a swivel cover.There is an embossed "S" on the swivel cover.iron, laudry, household, charcoal, antique, domestic, pressing clothes

The Winslow races were held from approximately mid-19th century to around 1946. It began as a small picnic race club in Tobin’s paddock to a splendid race course on the property, “Green Hills” owned by Mr. John O’Keefe about one mile north of the Winslow township.. The annual meetings held on New Year’s Day drew crowds of seven to eight thousand people. This photo provides a snapshot of one of the most important and well patronised events in the district. It is a very clear photo, providing evidence of racing operations and fashion of the day. Black and white photograph framed in brown engraved frame with fawn mount. Depicts a gathering of people and horses at race meeting. Winslow New Year’s Day 1912 written in black ink in bottom left corner of mount. Photographer’s name “Jordan Warrnambool,” embossed on bottom right hand corner.winslow, winslow racing club, jordan photographers

House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Willis Vale was one of the earliest homes built in the area.Black and white digital photograph.willis vale, partington family

Statue of Ruth is a religious reference to the harvest and to the importance of motherhood. Ruth was sculpted by Charles Summers a central figure in Australian art from the mid 19th Century. Summers was a founder of the Victorian Society of Fine Arts in 1856 and in 1863 he became a member of the commission of inquiry into the promotion of the fine arts in Victoria. He created many portraits and busts and is known for his bronze depiction of Burke and Wills in MelbourneThe sculpture is of historic and aesthetic significance to the people of BallaratMarble sculptural depiction of the biblical figure RuthPresented to the City of Ballaarat by the following citizens./ H F Elliot Mayor/ The Hon E Morey MLC/ Cr C B Retallack/ Cr J Heinz/ Cr C C Shoppee/ J N Wilson/ T Stoddart/ ruth, harvest

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Home of the Partington family.Digital copy of black and white photograph.willis vale, partington family, maygar family, whatmough

Spats, a shortening of spatter guards are a type of classic footwear accessory for outdoor wear, covering the instep and the ankle. Spats are distinct from gaiters, which are garments worn over the lower trouser leg as well as the shoe. Since the mid-19th century, soldiers of various nations, especially infantry, often wore leggings or spats to protect their lower leg, to keep dirt, sand, and mud from entering their shoes, and to provide a measure of ankle support.These spats are of a type commonly worn to protect good shoes early 20thC and may have been part of a soldiers uniform c 1914A pair of khaki wool spats with 4 buttons and leather strap, with metal buckle, to pass under instep.MADE IN ENGLANDfootwear, spats, army uniform, clothing, knitting, craftwork, wool, world war 1 1914-18, world war 2 1939-1945, early settlers, city of moorabbin, bentleigh, mckinnon, ormond, moorabbin, post war settlers, hunt ailsa,

A safari helmet was also called a pith helmet as it was made of sholapith material. It was first used by the Spanish forces in the Spanish East Indies and by the mid 19th century was used extensively by military forces in tropical countries and then became common civilian headwear for westerners in the tropics by the end of the 19th century. Safari helmets are still won today in tropical countries by both men and women and are part of the dress or ceremonial uniform for many members of the armed forces and music bands. This helmet has no known local provenance but is retained for display purposesThis is a pith or safari helmet made from a cream-coloured stiffened fabric. The crown has six segments with a small dome on top with three arch-shaped breathing holes. Around the edge of the crown is a white or stiffened cream cloth (puggaree) intertwined in layers and stitched onto the crown. The brim is peaked at the front and oblong at the back and tapered from front to back. The pleated cloth band is stiffened and has two brass clips. The edge of the brim is reinforced, perhaps with wire. Inside the helmet is the brass base of the top dome in eight circular sections. The interior of the helmet has green cloth in a damaged state. headwear, history of warrnambool

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Home of the Partington familyDigital copy of black and white photograph.willis vale, partington family, whatmough, maygar

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Home of the Partington familyDigital copy of black and white photograph.willis vale, partington family, maygar, whatmough

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Home of the Partington familyDigital copy of colour photograph.willis vale, partington, whatmough, maygar

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Home of the Partington familyDigital copy of black and white photograph.willis vale, partington

Commercial tin openers first appeared in the mid 19th century and this model dates from the early 20th century. An improved version when a second serrated wheel was added came into operation about the mid 1920s. Tins (now cans) of food with sealed tops became popular in the 20th century and all households needed a tin opener. Today the can opener is still used but increasingly the can lids have an inbuilt clip that is pulled out to open the can. This tin opener has no known local provenance but it is retained as an early model of a tin opener from the past. It will be useful for display. This is a cast iron tin opener with a cutting blade attached to a piece of metal with a screw. The metal handle curves out from the metal piece holding the blade. The opener is a little rusty in parts. The name ‘Guard ’ is on both sides of the handle in raised metal letters.‘Guard’ household items, history of warrnambool

These two ledgers, used between 1913 and 1926, come from the Haberfield family. James Haberfield came to the Warrnambool area from England in the mid 19th century and with his wife established a property, 'The Briars' at Dennington, near Warrnambool. Two sons, James Bertram and William, were cartage contractors and cash produce buyers in the first half of the 20th century with the business based in Fairy Street and Farnham ('The Briars'). These two ledgers contain the business dealings of the Haberfield Bros. business in the 1910s and 1920s. These ledgers are of considerable interest as they record the business details of an important early cartage and produce business in Warrnambool. Also the Haberfield family was a prominent one in Warrnambool in the 20th century. The building that contained the produce store run by William Haberfield at the corner of Fairy and Lava Streets still survives..1 This is a ledger with a black cover with a beige leather spine and edges and a red and gold label. The pages are ruled with red and blue lines and contain handwriting in black ink. The spine is a little scuffed. .2 as above but with an alphabetical listing at the front section and with no scuffingCash Book Ledger Haberfield, J.B. Ledger From Folio 270warrnambool produce stores

Ellen and Charles Partington at Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough.Home of the Partington familyDigital copy of black and white photograph.charles partington, willis vale, ellen partington

Believed to have come from Tooram where it was used for cheese making. Tooram commenced cheese manufacture in the mid 19th century in a purpose-built bluestone factory beside the homestead. It was initially set up by Pierce and a long article in the Warrnambool Standard describes the factory and its processes. Cheese production continued through changes of ownership until the 1930s when the Uebergangs ceased making cheese on site. The table was auctioned at Panmure and purchased by 'Flapper' Clarke of Panmure who donated it to the museum in 2012.Rectangular wooden table with trough top, two rounded handles at either end and four legs with stays at either end; has been lime washed on the outside.rural industry, agriculture, food technology, dairying, food processing, allansford, tooram, panmure, cheese making, clarke

Commercial tin openers first appeared in the mid 19th century and this model dates from the early 20th century. An improved version when a second serrated wheel was added came into operation about the mid 1920s. Tins (now cans) of food with sealed tops became popular in the 20th century and all households needed a tin opener. Today the can opener is still used but increasingly the can lids have an inbuilt clip that is pulled out to open the can.This tin opener has been retained as an early model of a tin opener from the past. It was used locally in Wodonga and donated by a Wodonga resident. It is also in relatively good condition.This is a cast iron tin opener with a cutting blade attached to a piece of metal with a screw. The metal handle curves out from the metal piece holding the blade. The opener is a little rusty in parts. The name ‘Guard ’ is on both sides of the handle in raised metal letters. "GUARD" in raised letters on both sides of the handle.household items, cast iron appliances, can openers

This book is a reprint of a rare 19th catalogue of Australian tradesmen’s tokens. A token was a coin to the value of one penny produced in the mid 19th century to benefit businesses at a time when there was a shortage of English pennies. The token or penny had the name, business and date on the coin and could only be used in that particular business. In Warrnambool two businesses, those of William Jamieson of Liebig Street and William Bateman of Banyan Street, had tokens (1855 and 1862). Today examples of these local tokens are highly valued because of their historical interest. This book is of interest as a reprint of a 19th century catalogue of Australian token coins. It will be useful as a reference book.This is a soft cover book of 80 pages. It has a yellow cover with black print within a white background frame. The text contains many black and white images of tokens.tradesmen’s tokens in australia

Wax matches also known as 'strike anywhere' were invented in 1826 by William Newton in England. It consisted of a wax stem with embedded cotton threads and a tip of phosphorus. Cases of various styles were introduced to protect against accidental combustion. This simple but robust metal cylindrical box with close fitting cap made it attractive to soldiers in World War One. Bryant & May was a British company created in the mid-19th century specifically to make matches. In 1901 they acquired the rights to the Swan Vesta process.Match cylinder with press on lid.On cap " Bryant & Mays Wax Vesta London"match, bryant & may

The Henty family and their descendants were notable settlers in Australia, initially in Western Australia, then in Launceston and finally in Victoria. While most family members settled in Victoria from 1834, others remained in England and in Tasmania. The identity of the sitters in this mid 19th century pair of portraits is as yet unidentified. The locket was purchased by the Society as part of a small collection of Henty memorabilia and portraits from the owner of Moorabool Antiques, Geelong in 2021, which had in turn acquired the item from the estate of Dennis Alston of Alston's Antiques in Hamilton, Victoria.Members of the extended Henty family were notable British settlers of southeastern and southwestern Australia. The connection to Kew (Vic.) is that members of the Henty family owned important mansions in Kew in the 19th century. Stephen George Henty's family lived at 'Findon', and Francis Henty of 'Merino Downs' in the Western District lived in his final years at 'Field Place', Kew. Numerous members of the Henty family are buried in the Boroondara General Cemetery.Small hinged locket made of tortoiseshell inlaid with mother-of-pearl, silver and gold. The locket is designed to be worn as a pendant. The two hand-tinted encased oval portraits are of an elderly woman on the left and an elderly bearded man on the right. The inlaid locket is probably Indian given the style of the floral inlay on the front and reverse. The portraits do not appear to be daguerreotypes, ambrotypes or tintypes and require further technical investigation.henty family, australia - early settlers

The Taylor Slate was developed by Rev. William Taylor in England in the mid 19th century it was in common use until the early 1970's and enabled blind or vision impaired students to do maths calculations by arranging metal pegs in the slate. The main part of the slate is a metal sheet with 432, 8 sided holes which small metal pegs are inserted. The pegs have different shapes on their ends. These are used to represent different numbers and symbols depending on the way the pegs are placed in the slate and which combinations of pegs are used.39 sliver rectangular cubed pegs braille equipment, education

This pair of 19th century candleholders were presented to Nazareth House Ballarat by J.A.Chalk one of Ballarat's richest 19th century gold-mining entrepeneurs. J.A.Chalk was a partner in the Madam Berry Mines together with Martin Loughlin and William Bailey and was Manager of the Buninyong Estate Co., the Band and Barton Co., the Sebastopol Plateau Co., and the Prince of Wales and Bonshaw Co. mines in 1887. Chalk was a Quaker and benefactor to many Ballarat institutions. He arranged for the Council Chambers to be made available for meetings of the Society of Friends (Quakers) in the mid 19th century.One of a pair of large 19th century ornamented candle holders for use in the Chapel at Nazareth House Ballarat presented by 19th century Ballarat philanthropist and gold-mining magnate.The candleholders are in two separate sections the heavy lead-filled brass base with demountable seven-branched candleholders surmounting the base. The lower portion or base form a single candlestick when the branched top section is removed. The branches are decorated with styalised rose petals and the tops of each base decorated with rims of neo-gothic coronas.Presented with King Regards By J.A.Chalk Ballarat.candleholders, candlesticks, nazareth house, ballarat. j.a.chalk, madam berry mines, goldmining, entrepenauer, buninyong, sebastopol, prince of wales, bonshaw co, quaker, society of friends.

The Taylor Slate was developed by Rev. William Taylor in England in the mid 19th century it was in common use until the early 1970's and enabled blind or vision impaired students to do maths calculations by arranging metal pegs in the slate. The main part of the slate is a metal sheet with 432, 8 sided holes which small metal pegs are inserted. The pegs have different shapes on their ends. These are used to represent different numbers and symbols depending on the way the pegs are placed in the slate and which combinations of pegs are used.1 silver rectangular metal mathematical slate including tray braille equipment, education

King Camp Gillette observed in 1902 that as existing, relatively expensive, razor blades dulled quickly and needed continuous sharpening, a razor whose blade could be thrown away when it dulled would meet a real need and likely be profitable. Gillette's innovation was the thin, inexpensive, disposable blade of stamped steel. Safety razors had been developed in the mid-19th century, but still used a forged blade that dulled and rusted.. Gillette's safety razor was expensive but lasted many years and the convenience of inexpensive disposable sharp blades was very profitable for Gillette.Throughout the 20thC most men used a safety razor with disposable stainless steel razor blades to shave their beards prior to the introduction of affordable electric razors in 1960's.A two piece stainless steel razor blade holder. The base has a round hole to safely push blade with fingertip and the lid has side finger grooves to aid opening. Contains unused 'CLUB' razor blade in paper packet, 2 used Wilkinson Sword razor blades and 2 Gillette Blades on razor blade 'CLUB', WILKINSON SWORD ; GILLETTEshaving equipment, safety razors, gillette king, proctor & gamble, club razor blades pty ltd melbourne, wilkinson sword pty ltd england, moorabbin, bentleigh, cheltenham,

Wallpaper fragment from an early workman's cottage in Weller St, Geelong West built in 1854. This property was refurbished following its sale in the early 1990s. Over time many layers of wallpaper had been pasted to the original paper. The wallpaper was damp and hanging off the walls. It was removed to reveal packing case 'slats' on the stud wall. When the skirting board was removed the original wallpaper was revealed. Although not a Warrnambool artefact, the Weller St property was owned by a local resident. It shows the wallpaper design of the period and the manner in which wallpaper was attached in the mid 19th century.Wallpaper fragment with maroon flowers and olive green leaves on a bone-coloured background mounted on hessian backinggeelong west, weller st, workman's cottage, interior decoration, wallpapers

House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. The derelict Willis Vale house was vandalized later destroyed in 1964 when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough. This photo was taken after the Partington's moved house in 1947 across the river where Alan built their new Alwyn house that had access to electricity.A pioneer home in Greensborough.Digital copy of black and white photograph.willis vale, partington family, robert whatmough, maygar family

This deck cannon is believed to be a replica Carronade as it has no foundry mark, year of manufacture, proof marks or weight of carronade on it. However, its design matches the design of Carronades used in the early to mid 19th century. History: The carronade was designed as a short-range naval weapon with a low muzzle velocity for merchant ships, but it also found a niche role on warships. It was produced by the Carron iron works and was at first sold as a complete system with the gun, mounting, and shot altogether. Carronades initially became popular on British merchant ships during the American Revolutionary War. A lightweight gun that needed only a small gun crew and was devastating at short range was well suited to defending merchant ships against French and American privateers.   Its invention is variously attributed to Lieutenant General Robert Melville in 1759, or to Charles Gascoigne, manager of the Carron Company from 1769 to 1779. In its early years, the weapon was sometimes called a "mellvinade" or a "gasconade". The carronade can be seen as the culmination of a development of naval guns reducing the barrel length and thereby the gunpowder charge. The Carron Company was already selling a "new light-constructed" gun, two-thirds of the weight of the standard naval gun and charged with one-sixth of the weight of the ball in powder before it introduced the carronade, which further halved the gunpowder charge. The theory of its design was to use less powder and had other advantages that were advertised in the company's sales pamphlet of the time, state. The smaller gunpowder charge reduced the barrel heating in action, also reduced the recoil. The mounting, attached to the side of the ship on a pivot, took the recoil on a slider, without altering the alignment of the gun. The pamphlet advocated the use of woolen cartridges, which eliminated the need for wadding and worming, although they were more expensive. Carronades also simplified gunnery for comparatively untrained merchant seamen in both aiming and reloading that was part of the rationale for adopting the gun. Other advantages promoted by the company were. The replacement of trunnions by a bolt underneath, to connect the gun to the mounting, reduced the width of the carriage that enhanced the wide angle of fire. A merchant ship would almost always be running away from an enemy, so a wide-angle of fire was much more important than on a warship. A carronade weighed a quarter as much as a standard cannon and used a quarter to a third of the gunpowder charge. This reduced charge allowed Carronades to have a shorter length and much lighter weight than long guns. Increasing the size of the bore and ball reduces the required length of the barrel. The force acting on the ball is proportional to the square of the diameter, while the mass of the ball rises by the cube, so acceleration is slower; thus, the barrel can be shorter and therefore lighter. Long guns were also much heavier than Carronades because they were over-specified to be capable of being double-shotted,(to load cannons with twice the shot, for increased damage at the expense of range). Whereas it was dangerous to do this in a carronade. A ship could carry more carronades, or carronades of a larger caliber, than long guns, and carronades could be mounted on the upper decks, where heavy long guns could cause the ship to be top-heavy and unstable. Carronades also required a smaller gun crew, which was very important for merchant ships, and they were faster to reload. Additional notes: Cannon cast in England, Wales and Scotland had their imperial weight chiselled or engraved in the format of 4-2-0 on the bottom of the cascabel, indicating the weight of the cannon as 4 hundredweight, 2 quarters and 0 pounds. Since a hundredweight equals 112 pounds and a quarter weight is 28 pounds the total weight is 504 pounds or about 228 kilograms. The small bore replica carronade and carriage is part of a collection of nineteenth Century Flagstaff Hill Guns and cannons, and is a representation of carronades used from the early 18th up to the 1850s on merchant and military ships particularly the British Royal Navy until 1850. This example is not significant in the historic sense but demonstrates the type of artillery used aboard vessels of the time for protection & offensive military actions. Cannon, cast iron, small smooth bore cannon on the stepped wooden carriage with wooden wheels. It appears to fire a 12-pound cannonball. The Cannon barrel can have its elevation adjusted via a sliding sloped block at the rear of the cannon. Gun carriage has loops for locating and holding the carriage in position with the use of ropes. It is believed this carronade is a replica of a mid-to-late 19th-century Carronade cannon.Cast into metal; [Royal emblem of Queen Victoria (VR "Victoria Regina")]warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cannon, naval cannon, cannon on carriage, 19th century cannon, fortifications, smooth bore cannon, 12 pounder, carronade, artillery, replica, deck cannon, cannon in carriage, ship cannon

This miniature cash tin was produced by Fry's Chocolate Company of England as a promotional giveaway and probably held some chocolate samples. It would then have been used in a household for keeping trinkets or other small items. The Fry's Chocolate Company was established in Bristol, England in the mid 18th century by Joseph Fry and in the mid 19th century it produced the first mass-produced chocolate bar (1866 - Chocolate Cream, 1913 Turkish Delight). The company merged with the Cadbury company in 1919 and the Tasmanian Cadbury factory which opened in 1921 was known as Cadbury-Fry-Pascall. Fry's chocolate bars were very popular in Australia. This item is retained as a memento of Fry's Chocolate Company, the products of which featured in Australian life for many decades. This is a rectangular metal tin painted black and light brown. It has a hinged lid and a metal handle held with clips inserted into slits on the top of the lid. There is printing on the lid and a label on the base.Cash Fry's Chocolatechocolate bars, fry's chocolate, miniature cash tin

This bottle came from the Warrnambool aerated waters manufacturer, John Fletcher. This factory was commenced in the mid 19th century by John Davis. As a young boy John Fletcher worked in the cordial factory of John Rowley in Banyan Street, Warrnambool and then worked for John Davis at his Union Cordial Factory for many years. In 1885 he succeeded John Davis in this business. Fletcher’s business continued until1930 when it was bought by another soft drinks manufacturer, Ralph Reeves. John Fletcher manufactured aerated waters, soda, tonic water, lemonade, ginger ale, hop beer, hop bitters, sarsaparilla and cordials. This bottle is of interest because it is a John Fletcher bottle and he was a prominent soft drinks manufacturer in Warrnambool for over 40 years. This is a clear glass bottle. It has a round base and a rounded body tapering in the neck to a round moulded open top. The stopper or seal is missing. The bottle has embedded lettering with details of the manufacturer of the contents.‘John Fletcher Trade Mark (crown symbol) Warrnambool’ ‘This bottle is the property of John Fletcher Warrnambool & cannot be legally used by others’ john fletcher, warrnambool, cordial manufacturers in warrnambool, history of warrnambool

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was vandalized in 1964 and destroyed when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough. This photo was taken after the Partington's moved house in 1947 across the river where Alan built their new Alwyn house that had access to electricity.Home of the Partington familyDigital copy of black and white photograph.willis vale, partington family, whatmough, maygar family

Willis Vale: House built by Edward Maygar, Robert Whatmough lived there mid 19th century and later sold to Partington family. It was located on the Plenty River at Partington's Flat Greensborough. Land use included farming and orchards. The derelict Willis Vale house was vandalized in 1964 and destroyed when a fire originating from North Plenty Gorge - Kurrak Road - was lit by two teenage boys and made its way several kilometres down to Partington's Flat Greensborough. This photo was taken after the Partington's moved house in 1947; across the river where Alan built their new Alwyn house that had access to electricity.Home of the Partington familyDigital copy of black and white photograph.willis vale, partington, whatmough, maygar