This dress was handed down through the family of Harry Cameron, Orbost. It was likely worn by a member of the family.Associated with the Cameron family, Orbost.A full length black satin dress with long sleeves. It has two rows of 6 buttons across the bodice and lace applique on the shoulders. The neck and sleeves are trimmed with a fine white lace. There are metal stays inside the front of the dress.women's-clothing

This item was worn by Sarah Archer, born 9.11.1881, and her daughter Irene Jean Maiden, born 1.7.1923, She lived in Orbost all her life having been born at the oOld Orbost Hospital in Nicholson Street. Irene died aged 86. Until well into the 20th century, the corset was an essential element of fashionable dress. Corsets were worn by women (and much earlier by men) to enhance their figures and to hold their stockings in place. Although still sometimes used they were mainly used prior to the making of pantyhose approximately 1960. A corset made of heavy apricot / pink cotton fabric . It has back tape acing through metal eyelets, and slide hooks. It has suspender straps with clips attached to the bottom of the corset. The stays, possibly whalebone, are sewn vertically into the fabric.on label - in red ink - "Liberty Reg'd "6/2815 D" small below waist size 32" exactcostume-women corsetry clothing

Belt keepers used to secure belt to pants so when puled stays secured. Items part of the collection re "Craig Triffett". Refer Cat No. 5997.5Brass metallic clips in the shape of a "T" then curved around it attached to the belt as a clip.uniform, belt cliops, craig triffett

This item was worn by Marjorie McKeown (nee Ford)Until well into the 20th century, the corset was an essential element of fashionable dress. Corsets were worn by women (and much earlier by men) to enhance their figures and to hold their stockings in place. Although still sometimes used they were mainly used prior to the making of pantyhose approximately 1960.A corset of pink/apricot coloured cotton with small flowers embroidered onto the fabric, with whale bone stays, and with suspenders and metal clasps attached to the bottom. It has tape lacing and metal eyelets as can be seen in the photograph. It is marked as size 32, Jenyns Patent Corsetry.Size 32, Jenyns Patent Corsetrywomens-corsetry body-shaping womens-appareil

Worn and owned by Mrs Mary McKeown (nee Ford) a resident of the Orbost area.A size 27 corset of apricot coloured cotton fabric with small lines and flowers embroidered onto the fabric. It has a small elastic triangle panel in the middle front and two large panels at the sides. It appears to have stays (possibly whalebone), along suspenders hanging from the bottom.Size 27 Liberty female-costume under-clothes foundation-garments

THE JACKET This jacket has been tailored to flatter the wearer’s figure. It also has elements that keep it in good shape and condition, preserve it from soiling and give it a longer life: - the hooks and eyes that join the jacket to the skirt allow the outfit to be made in two pieces but fit close to the body without exposing undergarments - the seams for the metal stays have been cut and stitched to allow maximum movement of the wearer and still keep a trim figure - the discreet breast pocket allows the wearer to keep a handkerchief, coins or other small items close at hand - the lining includes removable padded shields to absorb underarm perspiration - the lining has two cotton loops attached for hanging up to air and freshen it - new cuffs have been attached over the original sleeves that have buttonholes but no buttons. The buttons may have been used to replace missing buttons on the front of the jacket or perhaps to repair worn cuffs The amber coloured satin jacket is fully lined, has turned-back cuffs, a band collar, and looped, coffee-coloured braid trim. A row of closely spaced, round bronze buttons with a floral motif form a decorative closure most of the way down the front of the jacket, below which are metal hooks and eyes that finish at the waist. Underneath the cuffs there is a closely fitted cuff with a row of three button holes but no buttons. The jacket lining has vertical metal stays spaced around the midriff, sides and back. There is an absorbent, removable pad hand-stitched to the underarm section of each sleeve opening. A small satin pocket is stitched discreetly onto the lining above the chest on the right-hand side. There are also two cotton loops sewn onto the lining. Several small metal rings are sewn at intervals around the inside of the waist A satin bow from the same fabric is attached at the centre back of the jacket at waist level. antique satin jacket, colonial evening jacket, ladies evening jacket, 19th century ladies satin jacket, evening outfit

This blouse shows excellent workmanship and is very decorative. It is not every-day-wear, but would have been worn for special occasions.This blouse is an example of the needlework skills of women in the late 19th and early 20th centuries.A woman's black blouse or top made of shot silk and with panels of black lace. It has long sleeves which are trimmed with lace at the wrist. Down the front of the garment is a pleated panel with the fine pleats travelling cross-ways. Inside are metal stays which preserve the shape and are now rusty. women's-clothing silk-lace

This bodice is stiffened by what is commonly referred to as natural whalebone, but is actually baleen, which was in use from the 18th century through to the Edwardian era. It was hand sewn in Warrnambool in the 1900's.The bodice is significant for demonstrating the use of historical whalebone, or technically baleen, for its stays. This practice was used from the 18th century through to the Edwardian era.The bodice is made of gold cotton over the whalebone stays at the waistline. It is trimmed in brown fabric and has twenty-two buttons down the front from top to bottom. The sleeves are Leg-o'-mutton style. The bodice has pin tucks down the front. It was hand sewn in Warrnambool in 1900's.flagstaff hill, warrnambool, bodice, ladies clothes, whalebone stays, baleen stays, women's clothing, corsetry, corset boning, female adult, hand sewn

This was the main target used for bombing and strafing practice during WWII by trainees at the RAAF Air School at Nhill.Original target from the bombing range. Other temporary wooden targets were used but this is the only original target that now exists.This target is made of 10mm steel plate. Two circles approximately 1.5 metres in diameter are slotted and joined at right angles so that when viewed from a distance would always appear as a round ball. Includes four support stays approx. 14 foot long 3" steel pipe with flattened ends.It is marked in several places due to being hit by bombs.target,

This calico, waist-cich with suspenders is an example of the dressmaking skills of the women of the families of the pioneer settlers and market gardeners of the Moorabbin Shire c 1900The Maggs family were early settlers in Moorabbin Shire. The pioneer settlers and market gardeners of Moorabbin Shire had to be self reliant and made their own clothing and utensils. This is one of many items that exhibit the skill and craftsmanship of the women in these families. This is a lady's calico, waist - cinch with broderie anglais decoration at the top. It has enclosed "stays" in four places to shape and minimise the wearer's waist. There are laces to allow the garment to be pulled to maximum tightness at the back, and a front opening of strong metal hooks and eyes. There are two suspenders hanging at the front of the cinch with metal fastenings to attach to, and hold up, the wearer's stockings. clothing, brighton, moorabbin, pioneers, dressmaking, dendy henry, market gardeners, maggs geoff, craftwork, maggs nancy, flagg sarah, early settlers

St Kilda's Edge postcard showing people near the Catani Arch, St Kilda foreshoreblack and white postcard, original, unmountedSt Kilda's Edge. St Kilda foreshore, Melbourne's favourite seaside playground for 150 years. St Kilda's Edge is making sure it stays this way. Photo: Catani Arch, St Kilda Foreshore, Melburne, Australia, 1916. Port Phillip City Collection

A baleen whale has hard bristly baleen that hangs from its upper jaw inside its mouth instead of teeth. Baleen is made from a protein called keratin, just like human hair and fingernails, and its colour can vary between species, from black to yellow or white. The whale uses the tough, flexible baleen like a sieve to catch its food, filtering the small sea creatures out of the sea water it releases from its mouth. In the19th Century, whales were hunted for the products that could be made from their bodies, such as oil for lubricating machinery, soap making, lamps, heaters and fuel for the lighthouse lights. The flexible baleen was used for whip handles, carriage springs and umbrella ribs. It was also used for the skirt hoops, hat ribs, and rigid ‘stays’ in tightly fitting bodices to enhance their figures. The Southern Right Whales, as well as Blue Whales and Humpback Whales, are baleen whales. The Southern Rights annually visit the ocean off the southwest coast during the breeding season. In the early 1800s whalers hunted along this coastline in their dangerous pursuit of money for the precious cargoes of whale oil and bones. The population of these large animals dwindled quickly and by the late 1840s the whaling industry dwindled. Whaling recommenced from the 1940s to the 1980s when the whale products were used to make margarine and dog food. The baleen sample has been used to educate people about whaling and about the properties of baleen. The baleen sample is significant for its association with 19th century women's fashion. It helps to understand how garments were supported to shape a woman's figure. The baleen sample represents a period when whales were hunted and killed to provide income and products for for the local settlers and for the export industry.Baleen sample from a whale's jaw. Its black shiny hard yet flexible surface is slightly rippled and textured. One end is fringed and the other and a smooth cut edge. The colour varies in places, with stripy brown colouring. flagstaff hill maritime museum and village, great ocean road, shipwreck coast, baleen, whalebone, baleen whale, keratin, 19th century, whaling industry, women's fashion, stays, bodice, women's figures, fashion, clothing, whale oil, baleen colour, whale hunting, whale products, southern right whale, blue whale, humpback whale, southwest victoria, whalers, whale bones

Nipple shields were known from the sixteenth century and have been made from a variety of materials. Stays and corsets of the seventeenth and eighteenth centuries resulted in much nipple inversion and were often used day and night. Similar examples to this are held in the University of Melbourne Medical History Unit collection, and by the Dandenong Historical Society.Two moulded lead nipple shields in circular cardboard box. The box is lined with pink paper, and carries a quoted excerpt from Dr Wansbrough on the base. There are printed directions for use inside the box.breast feeding

James Steward was born St Edmunds Suffolk England in 1830 where he had some brewing experience in his youth. He arrived in Melbourne 1853 and headed to the Bendigo gold fields. He had a claim at Sailors Gully which he worked with varying success until 1856 then purchased a property which became the Albion Brewery. He became one of the largest mining investors in the district and owned a lot of valuable properties in the area. He died on 1 Dec.1898 The excitors of his estate were his sons William A Steward and Henry P Steward. A green bottle with white painted markings STEWARD BROS, a sketch of a person wearing a hat, SAILORS GULLY, THIS BOTTLE IS NOT SOLD. The bottle is eight and a half centimetres diameter at its base and stays at that diameter for 14 centimetres, the next eight centimetres tapers to three and a half centimetres the last eight centimetres to two and a half centimetres with a ring seal. The base has a five centimetre deep frog.bottle, steward bros, a.j.a. steward brewery, james steward

Nickel silver first became popular as a base metal for silver-plated cutlery and other silverware, notably the electroplated wares called EPNS (electro-plated nickel silver). Nickel silver is named for its silvery appearance, but ironically it actually contains no elemental silver. Items inscribed with WEARS WHITE meant that the metal stays white even as it wears.Five items of silver plated cutlery. 2133.1 is a small knife, 2133.2 is a fork and 2133.3 is a spoon. These three pieces are children's cutlery. 2133.4 is salt spoon and 2133.5 is a butter knife. All but 2133.1 have metal handles. The knife handle could be celluloid plastic.nickel silver WEARS WHITEcutlery nickel-silver table-ware

Black + White Photograph. Poppet Head with tubular steel legs, lattice stays and cross bracing. 1 Male pushing one track on overhead trackway from first landing platemans cubby or first landing. Wincher house, wood stack, chimney shed without coverin On back 'A,156' Signature 'R. Stanistreet.' 'Poppet head of a Bendigo Mine'. Stamped Australian Nations Travel Association.mining, surface equipment, surface site, bendigo, mines and mining, mines, mine, poppet head, mining shed

This nut roll tin was used in a period before 1959(when plastic containers started being used). It was a period when "home" cooking(desserts and cakes) was the only method of having cakes and other pastry dishes in rural areas as there were no local shops. The utensils available for this home cooking had to be strong and reliable and low maintenance. This was a period of self sufficiency especially in semi remote rural areas. Sadly, the Willow Company no longer has a nut loaf tin among their many cooking tins. A cylindrical nut loaf tin with removable lids at each end. The metal body of the tin has tiny patterned indented squares with only two of the three clips to ensure the tin stays closed. The lids at each end add to this tightening. On the lids there is rusty difficult to read stamping for the Willow brand. The cooked cake can be easily removed when the two lids are taken off. This is a rare tin.Around the edges of each lid is stamped 'NUT LOAF TIN'. In the middle of each lid is a circular shape with 'Made in Australia' around the edge. Inside this is a diamond shape with 'WILLOW'. There is a tiny square shaped pattern indented all over the body of the tin.baking tins, kitchenware, baking, cooking

Black and white photograph. Poppet head with tubular steel legs and two stages lattice stays to braces. Winder house overhead tramway and mullock dump. Chimney at rear. Two tubular steel storage bins. Inscriptions:on site - 'Specimen Hill U G M Co', On front - bottom of photograph 'Specimen Hill Gold Mine, Eaglehawk', on rear - '22', 'Speciment Hill Mine Eaglehawk'.mine, gold, specimen hill (eaglehawk )., bendigo, specimen hill, gold mine, eaglehawk, mines and mining, mine, mines, mining, poppet head

A clear glass bottle with an oval label embossed on it which states, J.R. OSWALD, EAGLE BRAND, a picture of an eagle, EAGLEHAWK. Around the base of the of the bottle states, THIS BOTTLE IS PROPERTY OF J R OSWALD EAGLEHAWK AND CANNOT LEGALLY BE USED BY OTHERS. The bottle is seven and a half centimetres diameter at its base and stays at that diameter for 15 centimetres, the next twelve centimetres tapers to two and a half centimetres with a pictorial crown seal.bottle, j. r.oswald, eaglehawk brewery

Good news! Our tree stays!, Strife in the streets... The great Greenhills roads row, Confessions from the Chamber, I remember when, We beg your pardon... you didn't promise us a plastic egg carton, Bodies ['Out-Fit'], New sport in N.V., From the Council Chamber, Nillumbik Historical Society, This and that, Diamond Valley Repertory. A digital copy of this Newsletter is available from Greensborough Historical Society. Newsletter, 20 p., illus.greenhills and north greensborough progress association, greenhills, apollo parkways progress association, apollo parkways

This hem marker stand is a measuring tool for gauging the height of a hem, such as on a dress or curtain. The adjustable arm slides along the ruler and its snug fit ensures that it stays at the right height. The end of the arm has a metal pin inserted into it to hold a piece of chalk, which would be used to mark the fabric. The hem marker would be used by professional dressmakers, seamstresses, and tailors as well as by crafts people at home. The hem marker was made in Birmingham.The hem marking stand is an example of tools used during the 1900s in the garments and furnishings trades as well as for domestic purposes. Since that time the tool has evolved into a more efficient design that makes home sewing easier.Ham marking stand with a wooden ruler, stand and a sliding adjustable arm on a brass sleeve. The arm has a metal pin on the end. Measurements are marked on both sides, inches on one side and centimetres on the other. Inscriptions are stamped into the wood. Made in Birmingham."- - - - / - - - - - / -BIRMINGHAM" On end of arm "2*4'flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, hem marker, dressmaker, dressmaking, alterations, tailor, dressmaker's tool, sewing marker, sewing gauge, seamstress, domestic use, dress fitting, curtain hemming, birmingham, freestanding, chalk hem marker, stand, home craft

This item is an example the skill and craftmanship of early settler families who of necessity were self-reliant.Bamboo shelves (3 shelves + top) with brown vinyl padded top. Insides are wallpapered with an embossed paper of cream flowers on dark brown background. Wooden sides are covered with same wallpaper which has been painted over tan . There seems to have been a door originally attached as there are two hinges, top and bottom, on right hand side. There are 4 legs angled outwards with stays - all made of bamboo. Back and shelves appear to be slatted timber. Sometimes called a "whatnot".furniture-shelves-handmade

This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417.A well-preserved ship’s deadeye with wire loop rope still attached. The original tar coating for water-proofing still remains, colouring the entire artefact black. It is wrapped in hessian cloth and hemp cord and is currently in storage under secure and stable conditions. This deadeye was recovered from the wreck of the LOCH ARD. The artefact is a typical deadeye, comprising a thick round wooden disc, pierced by 3 similarly sized and shaped holes from one flat side through to the other, in a triangle formation. The survival of the wire cable loop-rope suggests it was an Upper Deadeye, connected to the shrouds (mast rigging). Previous number PWO 2388.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, deadeye, loch ard, rigging

Document. Greeting Cards. Brown card with aqua, green & pink colouring at the bottom. There's a picture of a ginger/brown & white tabby kitten with very green eyes sitting on the coloured part. Front of card has been glued to the back. Front has been glued to the back of the card. Card & insert held together with a pale blue ribbon. Printed on the front: Times may change and customs alter, But so long as Friendship stays - Constant - as in former days, Remembrance shall not falter. To Teacher 1928written inside.person, greeting cards, malone collection, malone collection, greeting cards

Sheet of three City of Bendigo Municipal Weighbridge dockets. Printed in black on cream paper. Date line ends 19- -. Dockets are perforated with an unperforated strip down the left side which stays in the book. Each docket has printed on it: City of Bendigo Municipal Weighbridge, date space, Weighed, Owner or Agent, Purchaser, Driver Gross, Tare, Net Weight, Tolls, Weigher and has a table with Tons, Cwts, Qrs and Lbs. The copies that stay in the book don't have City of Bendigo Municipal Weighbridge printed on them.business, printers, cambridge press, cambridge press collection, city of bendigo municipal weighbridge

The bodice is of a style from the Victorian Era and so provides a good example of women's clothing from that time. Although it appears to have been made at a later time the lace possibly came from an earlier time period. It is of historic interest as it was amongst the belongings of the donor's Great Aunts who were both dressmakers at the original Terang & District Co-Op which was established in 1908.The item is of significance socially as an example of women's clothing in the Victorian era.A short, waist-length bodice most likely made as a performance costume. It is representative of a Victorian bodice style though the lacing used indicates that it would not have been worn in those times due to its revealing design. Flexible metal stays provide shape to the bodice at the front and back. Sleeves are elbow length and lined with cream fabric. The bodice has a lace collar and the sleeves are trimmed with the same lace. Small gold coloured beads are stitched to the flower centres of the lace pattern. The burgundy coloured satin has an embossed floral pattern. The lace is of interest as it is from an older time period and being beaded would be especially sought after. Machine and hand stitched.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, satin bodice, beaded lace, victorian era, metal stays, terang & district co-op

A dead eye is a part of a vessel’s rig On board sailing ships, dead eyes were used in three different areas. Traditionally dead eyes are made of wood but they have different forms according to where they were used in the vessel rigging. The most common type of dead-eye is flat, with three holes and was used to tension the shrouds, the heavy lines which steadied the masts on each side. Each shroud had a dead eye at the lower end, which corresponded to a similar dead eye attached to the side of the ship. The two were connected with a rope called a lanyard, which was used to tighten the assembly. The stays, heavy lines running forward from the masts, were also tensioned with dead eyes. These are much larger and rectangular, with four or six holes. The third type of dead-eye was a two-holed version attached to an eye at the end of the parallel, which tied a yard to the mast. The loose ends of the parallel rope passed through the dead eye and then down to the deck, making it possible to tighten or slacken the parallel from the deck so that the yard could be more easily manoeuvred. It was especially important for the mizzen yard, which had to be shifted from one side of the mast to the other when tacking the ship.An item used on sailing ships rigging this item of ships equipment and its use has been used from the beginning of the invention of sailing ships going back to ancient times. Its use on sailing vessels had not changed in design or use until they went out of fashion and steamships took their place.Circular wooden ships rigging dead eye with three holes Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel rigging, dead eye, sailing equipment