Part of the Running Stitch collection. Possibly made in the Ballarat area.Heavy weight domestic waggaWAGGA/ Maker Unknown. 108cm long X 67cm wide/ Floral cotton cover with filler of old garments/ Running Stitch Collection/ c/- Barbara Macey/ ...handicrafts quilting quilting - history, running stitch collection, running stitch group, handicrafts, quilting, quilting - history

The background history to this quilt is unknown as, like several of the Running Stitch quilts, it was found in an op-shop, this time in Ballarat. However, the technique used to bind it together and the rarity of the materials make it a valuable piece of our 'thrifty history'. The quilt insert has been made with layers of recycled bed coverings. It would have most likely had a cover made of a fabric (such as cretonne) as the layers have only been loosely held together with large quilting stitches. The outer layer is made of "marcella": a heavily woven cotton damask. These types of bedspreads were quite expensive and hardwearing. They were often handed down through the family and it is not surprising to see that the use for this particular bed covering has been continued past the 'presentable' stage on a bed.Detail of edge showing layers and stitching method. Deatail of corner showing layers.quilting history, running stitch group, running stitch collection, quilting - history

This item could have been used by a woman who had reasonably good hand stitching and patchwork skills. The time period would be before the 1950's as post 1950s this item would have been commercially available from any medium populated towns Historically this particular item would have been one before circa 1950s, when haberdashery shops would not have been so readily accessible for those families living in the Kiewa Valley. The protection of side boards indicates that furniture at that time was required to look good and last longer. Pride of the family household furniture was also very highTable or dressing table cover made of calico. Hand stitched into Suffolk puffs, large 12 cm in diameter, small 4.5 cm in diameter. 8 large and 103 small ones. All hand stitched together. Hand madepatchwork, calico, hand stitching, home furnishing, furniture coverings

An example of a Junior Legacy Club Badge that was stitched onto clothes. It appears to be a manufacturers sample. Junior Legatees would have had badges like this on their outfits for the classes held by Melbourne Legacy for many years. Outfits were provided for the children by Melbourne Legacy.An example of the cloth badge worn by Junior Legacy Club members.Cloth badge of the Legacy torch stitched on blue fabric containing the words Junior Legacy - Leader.Embroidered with 'Junior Legacy - Leader'junior legatee, boys' classes, girls' classes, jlc

This dress is hand made possibly by a mother for her daughters. It is hand and machine stitched. This style of dress would have been worn for special occasions, eg going to church or special outings.This item is very significant for the following reasons. Historic and social - it shows what little girls wore during the early 1900's of the Kiewa Valley. It also shows fashion of the times and how these styles of dresses were made. All of which is valuable for research on these topics. There are only two of these dresses in the collection of the KVSH, and therefore would be very rare. The condition is good enough to display, therefore it has good interpretive capacity.Brown Cotton Dress. Top and sleeves are lined in calico. Home made, with manual machine stitches and some hand sewing. The dress has a high round neck and long sleeves. There is a band around the waist to which a gathered skirt it attached with hand stitching. Two different shades of brown are used on this dress. Back opens with 8 hooks. Water stains on dresschild, homemade, dress, girl, kiewa-valley

Clothing. Possibly, a cardboard horse shoe shape, covered in 3 cm wide satin ribbon. On the face of the horse shoe 1.2 cm wide satin ribbon has been ruched to give a ''zig zag'' effect. A loop of the 1.2 cm wide ribbon, 20.5 cm long, would pass over the wrist. A small 1.2 cm X 2.5 cm piece of card has been stitched to the back of the horse shoe, with the words,''with love from Grandma''.On card stitched to back of horse shoe: ''With love from Grandma''.costume accessories, female, satin ribbon horse shoe

Published by Semco Art Needlework Pty.Ltd> Semco Park Cheltenham Road Black Rock S.9. Farrow Falcon Press Pty. Ltd. 226 Lonsdale Place, Melbourne. For Girls learning embroidery- home/schoolSemco Embroidery Text Book. White outline around Black cover. Large red circle with girl siting in front doing embroidery wearing Victorian style short puffed sleeved dress polka dot pattern and pantaloons red stockings and lace up ballerina style shoes1st Edition Semco Embroidery Text Book 3D Free sampler transfer inside. Booklet contains illustrations and instructions for each stich. Pages 2 and 3 have pencil squiggles across the top.: Stem stitch, Snail Trail, Back Stitch, Lazy Daisy Stitch, Thousand Flower Stitch, Buttonhole Stitch, Long and short buttonhole stitch, Chain Stitch Seed Stitch, Arrow stitch, Feather Stitch, Herringbone Stitch, Cross Stitch, French Knots, Lattice Stitch. Illustrations of designs with stiches referred to on previous pages. stawell

This altar cloth is representative of ecclesiastical linen in use in the early to mid-20th century. It is decorated with the Mariner's Cross symbol, connecting it to the history of the early Christian church. The cover for the cloth shows the respect the maker had for the cloth and what it stands for. The Mariner's Cross symbol also makes it appropriate as an altar cloth for the St Nicholas Seamen's Church at Flagstaff Hill Maritime Village. Mariner’s Cross symbol and what it symbolises The symbol of an anchor that also looks like a cross is called the Mariner’s Cross (also called the Anchored Cross or Cross of Hope). It looks like a ‘plus’ sign with anchor flukes at the base and a ring at the top. The anchor is one of the earliest symbols used in Christianity and represents faith, hope and salvation in times of trial. The Mariner’s Cross is linked to the scripture in Hebrews 6:19, which says “Which hope we have as an anchor of the soul, both sure and steadfast, and which entereth into that within the veil”. This particular Mariner’s Cross also has the letter ‘X’ under the post of the anchor. In Greek, the language of the New Testament, the word for Christ is ‘Christos’, which begins with the Greek letter ‘X’ or ‘Chi’. Together, the elements on this Mariner’s Cross - anchor, cross and ‘X’ - symbolise to the Christian that Jesus Christ the Saviour gives security and safety, hope and salvation. Many church organisations still use various forms of the Mariner’s Cross. This design is also known as the Anchored Cross or Cross of Hope. The Missions to Seamen organisation The Missions to Seamen is an Anglican (Church of England) charity that has been serving the world's seafarers since 1856. It was inspired by the work of Rev. John Ashley who, 20 years earlier, had pioneered a ministry to seafarers in the Bristol Channel in Great Britain. When Ashley retired because of ill health, others determined that the work should continue, and they founded the Missions to Seamen. It adopted as its symbol a Flying Angel, inspired by a verse from Revelation 14 in the Bible. Today there are over 200 ports worldwide where the Missions to Seamen has centres and chaplains. A Missions to Seamen’s Club offers a warm welcome to sailors of all colours, creeds and races. A sailor can watch television, have a drink and a chat, change money or buy goods from the club shop or worship in the Chapel. In Victoria, the Missions to Seamen still has clubs in Melbourne, Portland and Geelong. The altar cloth is representative of the ecclesiastical linen in use in the early to mid-20th century, when the original St Nicholas Seamen's Church was opened in Williamstown, Victoria. The Mariner's Cross embroidered onto the altar cloth gives it a connection with the early Christian church and with the Missions to Seamen. The fine hand stitching and embroidery is an example of traditional handcraft skills used over the centuries and still continuing in use today.Altar cloth, white linen, with custom made white cotton cover. The long rectangular cloth has the symbol of a Mariner's Cross (anchor and cross) embroidered with white silk thread on each short end. The wide hems are hand stitched. The cover has two white tape ties and embroidered text in blue silk thread. On cloth: symbol of (anchor with an 'X' stitched behind the centre of it). On cover, text "FLAGSTAFF/ HILL" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, religion, religious service, st nicholas seamen’s church flagstaff hill, altar cloth, church linen, ecclesiastical linen, mariner’s cross, anchor cross, cross of hope, symbol of christianity, anchored cross

Part of the "Wagga collection". Made from squares of patchwork suiting, machine stitched with red diamond and rectangle motifs at strategic positions. The diamonds look like they have been inserted in the fabric pieces where a dart has been cut and opened out.Quilt made of squares of patchwork suiting and fabric offcuts, machine stitched with red diamond and rectangle motifs at strategic positions.quilting history, patchwork history, running stitch group, running stitch collection, quilting - history, patchwork - history

Bodice (Wedding dress), hand and machine stitched. Silk lined with polished cotton. Slim ruched sleeves - ruched at inner and elbow side of sleeve (hand sewn). Elbow edge of ruching forms two ''frilled pleats'' down the sleeve to the wrist. Wrist edge lily pointed and finished with a 9 cm underfill of cotton lace. Top of sleeves have a leg-o-mutton balloon effect panel sewn at the shoulder and the upper arm. This balloon effect hangs down over the sleeves almost to the elbow. Top of sleeve has an embroidered lace frill hanging over armhole. Two silk bows are placed at the shoulders. Stand-up collar,5 cm deep is finished on each side with a pearl and glass beaded bow motif- 6cm in diameter. Hook and eye fasteners down front-metal loops covered with button hole stitch. Bodice boned with thirteen (13) ''bones''. Each pocket finished with a fan pattern stitching. Linen panel, with a diamond shaped weave stitched at each underarm. Front bodice is pleated from shoulders to centre front. Right front laps across left to fasten with a hook on the left shoulder. This panel is heavily beaded with glass beads and sequins. Over panel from right shoulder fastens with hook and eye at left hip line,with the pleated panel circling the waist.Matching skirt 11400.315.F.Davey & Co, Dress & Mantle Makers, View point, Sandhurst Label stitched at inside waistline of bodice.costume, female, wedding dress bodice

Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, and nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together and neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.A pair of handmade, adult brown leather work boots, with brown leather laces, decorative stitching, metal eyelets and are stitched with waxed thread. The soles are covered with hob nails in a decorative pattern. They have metal caps on the heels. bootlaces, boots, footwear, clothing

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.2 pairs of handmade, adult brown leather boots, with decorative stitching, eyelets and stitched with waxed thread. Soles covered with hob nails in a decorative pattern. 1 handmade child's brown leather boot, with decorative stitching, metal eyelets, heel has patterned nails.bootlaces, boots

The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/The use of tin to protect and store food and other items, revolutionised the world.Tin container painted yellow with printed crosses and circles,. The lid is labelled "Robur Cross Stitch Company" and "R" imprinted in the centre although the lid is badly corroded. ‘Cross – Stitch’ (printed green in small crosses and circles) followed by ‘Nett Weight ¾ lb. (printed beige in crosses and circles). Pure Blended Tea. Robur Tea Co Ltd’ flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, robur tea co ltd, tea, tea caddy, tin, tin plating, food containers

White naval cap with blue tally-band around it and bow on side. Stitching at the front of blue band - words ‘HMAS Australia’. Two holes on either sides of cap for string to go through. Blue ribbon attached to inside. Also piece of string attached to inner cap. HMAS Australia in yellow stitching on blue tally-band at front of cap. 8 GD Inscribed in pen on inside material.

This overcoat was designed and tailored by Dominex, a company that sold clothing in high end department stores such as Myer and David Jones in the 1940s through to the 2000s. As pictured in the accompanying advertising, Dominex looked to produce clothes for women to “casually, confidently wear … the exquisite styling and superb tailoring of… Dominex Coats”. This sentiment was carried by the company for more than 60 years. Amanda Morgan, a director of the Dominex fashion label in an interview from 2003 said “Not everybody wants sass, or sex, or high fashion for that matter. Au contraire. Our customers will be stylish, sophisticated and womanly, but we don’t do shoestring straps or asymmetrical lines." Dominex was a label specialising in exceptional quality "traditional" dressing for corporate wear. Their clothes looked to provide women with a return to the tried and true values of elegant, unpretentious, classic dressing. "Our look is European-influenced," Morgan explained further. "Inspired by Armani, Valentino, Chanel and Escada. Suits have been specially dyed in France to ensure the perfect shade of ice blue, lemon, grey, or slate. Fabrics are natural, silk and linen. Shapes are stylish, with an almost 1930s feel; classic pants, silk shirts, structured overcoats with elegant-length” Returning to this overcoat, it has a label on the inside which reads “Pure Wool Material by Godfrey Hirst of Geelong”. Nowadays Godfrey Hirst produce flooring products and are the largest manufacturer and exporter of residential and commercial carpets in Australasia. They have expanded into hard flooring and left their fashion days behind. This overcoat serves as a useful example of a different time for the company; before they made the change to concentrating exclusively on flooring, when they produced fabrics to be tailored for the height of Australian fashion. This overcoat was purchased and worn by Joan Waller, aunty of the donor, Kim Rosenow. Kim said her aunty was from Ballarat but frequently shopped in Melbourne to keep up with the latest trends. Her aunty Joan fitted the target demographic of Dominex well, as she needed to look sophisticated and elegant at social events and work. Kim donated the overcoat to the National Wool Museum in 2021. Green singled breasted overcoat with a narrow overlap and one column of buttons for fastening. The overcoat features notched lapels of a medium width and two large buttons of a green & dark green marble. The overcoat has two semi-visible jetted pockets at the hips. Internally, the overcoat features a black silk lining for comfort. It also features a stitched patch on the left side of the opening which reads “Pure Wool Material by Godfrey Hirst of Geelong”. At the collar, another patch reads “Dominex REGD”. At the cuffs, the overcoat finishes in a type of gauntlet cuff which stretches back over 200mm. The decorative finish utilises no buttons and has thick piping to accentuate this design feature. The overcoat finishes with a simple invisible hem at the bottom.Wording, gold. Patch stitched at collar: “DomineX / REGD.” Wording, black. Patch stitched at left off opening: “PURE WOOL MATERIAL BY / Godfrey Hirst / OF GEELONG”dominex, fashion, women's corporate wear, godfrey hirst, overcoat, wool clothing

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Handmade Waxed Thread attached to pig bristles, for boot stitching .bootmaking tools, thread waxers, threads

Trish hand stitched this cross for her husband - ex veteran. It was a birthday present as his birthday was on Remembrance Day.Textile - Cross stitch hand made 'Remembrance Day' picture in colour with 100% cotton and Aida fabric. Light grey, grey and black lettering. Illustration - in colour, poppies with background silhouette of soldier and 4 crosses. Framed - clear varnish on timber, MDF book, glass front.textile, remembrance day

This item is hand made possible by a mother for her daughters. It is hand and machine stitched. This style of aprons / pinafore is attached to the two brown dresses that are also in the collection. This item is very significant for the following reasons. Historic and social - it shows what little girls wore during the early 1900's of the Kiewa Valley. It also shows fashion of the times and how these styles of aprons were made. All which is valuable for research on these topics. There are only a few of these aprons in the collection of the KVSH, and therefore would be very rare. The condition is good enough to display, therefore it has good interpretive capacity.Girls apron or pinafore. White linen with crocheted lace around the edge which is continuous around the skirt, sleeve and neck. The shoulders flaps appears that they should be pinned to the dress beneath, and pinned together at the back of the waist. The apron is manual machine stitchedclothing, girls, children, pinafore, apron, kiewa-valley, alpine-shire

Velvet jacket, black background with design of red and gold flowers outlined in gold thread. Five black buttons down the front. Lined with black polyester fabric.Stitches Items Australiacostume, female

A lace head dress belonging to the women of the family of George Ward Cole’s in the late 1800s. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor the Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished. A hand sewn cream lace cap from late 1800s. A silk satin ribbon that encircles the back of the crown of the head, creates the structure of this cap. Towards the front it also has a net and wire-reinforced peak. Over the top of this support is a central diamond shaped lace piece of seven and a half centimeters diameter to which is attached a fine lace net that is gathered and stitched around the edge of the central lace. Two decorative bows of the same silk satin fabric are positioned on the support over the top of the lace at either temple of the wearer. "W-COLE" hand stitched on inside of band. It is unknown when and by whom this inscription was made.st ninians, george ward cole, headwear, late 1800s, brighton, margaret morrison ward cole, agnes bruce ward cole, thomas anne ward cole

Comic-book style promotion featuring students completing the two-year Advanced Diploma of Arts (Graphic Design) course at University of Ballarat, 2007. Inside front cover features student names and photographs, plus "character" names. Pages feature student folio pieces. 16pp saddle-stitched full colour offset throughout.Promotional catalogue for graduating students of the University of Ballarat (TAFE), Advanced Diploma of Arts (Graphic Design). 16pp saddle-stitched booklet, full colour offset throughout.diploma of graphic design (2 years), university of ballarat, federation university, graphic design, tafe, advanced diploma, arts academy, camp street campus

This ball was possibly made by Corporal C. McMullen during WWI. McMullen made footballs for the Australian Imperial Force, all of which were hand stitched. He made the original ball for the 1916 Australian Rules exhibition match held in London and watched by 3000 spectators. McMullen's balls were called "The AIF Ball", indicating that this might be one of them. The inscription "Match .II." suggests it was used for a later match.The provenance of this object is unknown, but it was potentially made by Corporal C. McMullen for use in an AIF exhibition match. If so, it is a highly significant piece of sporting memorabilia, and holds national significance as an object that tells the early evolution of Australian Rules Football and the importance of sport to the armed forces.Brown leather football, deflated. Stitched together. Four leather threads at top of ball. Has stencil painted markings on both top sections.THE AIF BALL / MATCH .II.football, aif, afl, australian rules, sport, leather, wwi

These wool undervests were purchased by Edith Bender for her husband Edwin, prior to 1963. Edwin would catch a ‘Red Rattler’ train along the North Shore line to go to work in Pitt Street., Sydney. Edith was concerned Edwin would catch a cold in the unheated train or in his unheated office, so she brought these woollen undervests for him to wear to work. Edwin would wear the undervests under a woollen suit and with a woollen overcoat. Edwin passed away in 1963, at which point Edith stored the undervests away. They were passed to Edith’s daughter when Edith passed away in 1980. They were then passed to Tanya Davis on the death of her mother. Tanya donated the undervests to the National Wool Museum in 2021.2x cream wool undervests. Henley style with short sleeves and three buttons at the front. Labels from the maker ‘Braemar’ have been stitched to the neckline of both vests. An additional label is stitched under the first button on the front of both undervests. Label stitched to neck of vest: BRAEMAR / MADE IN SCOTLAND / OPTIMUS / PURE WOOL / TREATED TO RESIST / SHRINKAGE / QUALITY / B. OPTIMUS Label stitched to front buttons of vest: MADE IN SCOTLAND / FOR FARMER’S / SYDNEY Attached swing tag: BRAEMAR / The WASHING of WOOLLENS / PREPARE a bath of good bar or flake soap, thoroughly dissolved in water not hotter than the hands can bear. Squeeze the garments through the hands several times in the bath. Don’t rub them on a board. Rinse in warm water until soap is thoroughly removed. Wringing should be done in the hands. Stretch well to width and length and dry at once, preferably in the open air Stretch again in the hands when dry. Attached swing tag. Reverse: IMPORTANT POINTS / Do not use soda or washing powders. / This garment must not be subbed on a board, or subjected to mechanical friction.red rattler, wool clothing

Clothing, khaki woollen WW2 army uniform jacket. Single breasted with four brown metal AMF buttons (2 cm). Two breast pockets, (16 X 18 cm) with fold over tabs. All button tabs fastened with 1.5 cm metal buttons. Long sleeves with stitched down cuffs with V shaped peak on upper side. Both sleeves lined with cream and blue striped cotton fabric. 30 cm split at centre back from hem. Button down epaulettes on each shoulder with three captain's pips and two black stripes. Cloth badges on top of each sleeve. 1. Navy and red unit colour, (3 cm X 2.5 cm). 2. Light green, brown and blue colour (5 X 5 cm) (unknown). 2.5 X 2.5 cm square metal badges on each corner at front of collar. 5.5 cm wide cloth belt with metal buckle. Belt attached on side seams at waist by leather tabs threaded through belt keepers and fastened with 1.5 cm buttons. Cap belonged to John Kenneth Martin, padre in 2nd Australian Corps AIF. Served overseas as a Chaplain from 1940-1945. Old box 314Y.Name tag stitched under collar, and inside back '' J.K.Martin''.costume, military, army uniform jacket ww2

This flying suit would have been worn by a pilot of the Royal Australian Air Force. It is a drill suit and most likely was not used in active service. This flying suit dates to 1988. It is no longer manufactured and is an historically significant article of military clothing. It is also in good condition.Olive drab coloured overalls. Full length sleeves and full length legs. Two pockets on the front of each leg. One zip at the front of each leg with extra fabric in the interior for fabric width enhancement. One access zip on each hip. Two diagonal breast pockets, either side of chest. One small pocket on each arm. All pockets are fastened with metallic brass colour zips. Another pocket on the left upper arm with stitched sections for storing pens. A silver coloured metallic pen holder is clipped and stitched into this section. One epaulet on each shoulder, each fastened with a brass coloured metallic stud. Regular shirt collar. One long zip at the front from the groin to the collar. This has two zip handles, each with a thin piece of leather attached to aid zipping. A patch with inscriptions machine stitched to nape of neck interior. Three brass coloured metallic studs, with a small piece of size adjustment fabric (and the clipping stud attached to this) on each sleeve. Three brass coloured metallic studs, with a small piece of size adjustment fabric (and the clipping stud attached to this) on each side of the waist. One rectangular leather clip attached to the upper right leg pocket. Patch stitched to nape of neck interior has the following inscriptions: A.G.C.F. VIC 1988 (symbol of broad arrow) SIZE.3 8415.66.013.1557 NO NAMEflying suit, royal australian air force

This cot cover insert was made during the 1929 depression an a time of financial hardship. It was made by Jean Hepner's Grandmother from used woollen garments. They were hand stitched on to an old woollen blanket. The quilt was used by at least five of the seven children born in to this family and also by grandchildren in later years. It was used with assorted covers which were replaced when needed.Child's cot cover insert (wagga) made from discarded woollen garments such as socks, stockings and vests and stitched in multiple layers on to a woollen blanket. It is mostly cream in colour with patches of blue and brown.quilting, history, depression era, wagga, geelong, quilting - history

These cello strings belonged to Edith Jacobs (nee Larwill) who was prominent in music circles in Queensland before her marriage to Henry Jacobs, a Warrnanbool Estate Agent and Auctioneer during the 1940s and 50s. Edith Jacobs featured in many concerts and musical entertainments in Warrnambool during the middle years of the 20th century. Her son, Frank Jacobs was a prominent businessman in Warrnambool in the 70s, 80s and 90s and the wallet was either made by him or for him. These items are of some significance as they belonged to Edith Jacobs, a musician who was prominent in the Warrnambool musical scene in Warrnambool in the 1940s and 50s.This is a light brown leather wallet, hand made with two fringed areas, one on the top covering. There is some machine stitching and some hand stitching (repairs)The wallet is lined with cream-coloured silk and the back of the wallet has an etching of an emu. The opening has two press studs for closing the cover. There are also three paper packets containing cello strings. Two of the strings are loose in the packets. Label stitched on – ‘Frank H. Jacobs’ Etching of emu Strings – ‘Calizi Tru-tested Strings, Cello, G or 3rd, Wound on selected gut, Made in England, J. E D. & S Ltd.’ ‘Conservatoire, Cello, A gut, Reliable and Durable, No. 1620, J.E.D.& S. Ltd’ edith jacobs (larwill), cello, cello strings, warrnambool

Cream coloured silk wedding dress with train. Three flat panels at front and side, lined with polished cotton. Centre tightly gathered panel at centre back lined with stiffened cotton.Other panels lined with stiffened cotton above hemline of skirt. Double layer lace insert inside lower edge to hemline. Back opening with four hook and eye fasteners. Deep pocket on side seam at hip on RHS. Three back panels extended below hemline of skirt to form squared edge train. Two hanging tapes inside waist band. Skirt hand and machine stitched. Matching bodice 11400.314.Label stitched inside skirt waistband - ''F.Davey & Co Dress & Mantle makers, View Point, Sandhurst.costume, female, wedding dress skirt

H.M.A.S Watson, navy cap. Cream cap with blue tally band around it and tied bow attached on side. Stitching at the front of blue band - words ‘H.M.A.S Watson’. Two holes on either sides of cap for string to go through. Blue ribbon attached to inside. Also piece of string attached to inner cap, coming off stitching on one side.H.M.A.S. Watson stiched in yellow stitching on blue band at front of cap. A B Young inscribed in pen on inside material in white. 5 also inscripted under A B Young with other text - nnoa? White label stiched inside - AGCF - Australian Government Clothing Factory, VIC RAN Size 6 7/8, Indent No. 8405.66.0756070

Trudi Hogeman made this fan from old greeting cards. This is an old way of making fans with blanket stitch around the edges. She was a member of a craft group when she made this object. Trudi Hogeman died in January 2017 and is buried at Marlo. Her daughter is heather Terrell, president of the Orbost Historical Society.This item is an example of a handcrafted item and reflects the needlework skills and hobbies of women at the time.Six teardrop shaped leaves held together by a paper clip to form a fan. It has been blanket stitched around the edges of each leaf. Leaves are made of cardboard photographs possibly cut from greeting cards. All cards have floral images.handcraft hogeman-trudi fan