RSSILA. Returned Sailors, Soldiers Imperial League of Australia. Badge belonged to Thomas William Tuckerman No 7318 AIF. Refer 935P, 1265.3.Badge R.S.S.I.L.A (RSL) membership. Two central figures with a small crown at the top. Over the crown is a clip with "47" denoting membership paid 1947. On the rear is a metal washer and pin.Numbered "V 90195" on the rear.rsl, military history, rsl badges

Amongst field kit, the sweat rag was every bit as important as other items - it served many purpose eg washer, towel, cleaning equipment, pillow, sun shade.Held in high esteem by the field soldier because of its efficient and many purpose usages.Field sweat rag for field soldiers made of soft absorbent material and suitable for a wide range of uses.vietnam, vietnam war, diamond valley vietnam veterans sub branch, equipment

Account No. 6113 from the Bendigo Radio Service, Bill Ellen Electrical, dated 31 August 1964. Detailed account for the repair of a Stampco washer. Pink receipt attached for £3/18/-.person, receipts, j w swatton, j w swatton collection, bendigo radio service, bill allen

8452.1 - Not of "coal shovel" type ( blade lacks steep sides); has "D" handle; blade is secured to handle shaft by bolt and washer, but also a loop of thick wire through shaft.

Hand operated washing machine which is operated by a windlass. Also included is a hand rotated mangle with a worm drive and adjustable leaf spring.A gear reduction drive operates either the mangle or the washer.Patented Feb 1860domestic items, laundering

Oil bottle for 303 Rifle. Brass cylinder with screw out top with oil scoop. .1) Brass cylinder for oil with black sealing washer. .2) Brass screw top with oil scoop attached.OA stamped on screw top Tick (symbol) on side of cylindercontainers - commercial, metal craft- brassware, military history - equipment, oil container

Nails such as this solid copper nail were forged by blacksmiths. A nail of this length could have been used for the ship's decking. It was recovered from the shipwreck of the barque Children. The Children wrecking: The barque Children was one of the first vessels to be lost in the Western District the vessel was wrecked to the east of Warrnambool on 14th January 1838. When it ran ashore in hurricane-force winds, 22 passengers and crew were fortunate to escape being battered to death on the rocks. The Children broke up within 20 minutes, sweeping sixteen of those on board to their deaths. After eleven days, the survivors, all of whom were injured, were rescued and taken to Portland. According to Lloyd's Shipping Register 1837-1839, the Children was built in 1825 at Liverpool and operated by owners Gordon & Co, of London. Registration number 123/1837, James Henty then bought her in 1837 as a three-masted barque of 254 tons, with a hull of “part pitch pine, felt sheathed” and “coppered in 1837” at Launceston registered number 6/1837. In 1838 the Children, under her master Captain H. Browne, completed a successful round trip from Launceston to London (carrying wool and whale oil loaded in Portland), returning in late November of that year carrying a general cargo including house bricks used for ballast. On the 11th of January 1839, the Children sailed from Launceston for Adelaide, with 24 passengers, 14 crew, and an awkward mixed cargo, including 1500 sheep, 8 bullocks, 7 horses, and farming implements, and six whaleboats with associated whaling gear. One account states that when the Children were “put out from port she was light and badly ballasted”. The vessel immediately encountered four days of hurricane-force storms, eventually clearing on the early morning of the 14th. However, it was too late to take accurate measurements of the sun or stars to establish their position relative to the coast. The Children collided with a limestone stack at the entrance of Childers Cove, and the seas smashed her into pieces within half an hour. All the cargo and 16 lives were lost including 8 children. The Henty brothers contributed £150 towards a fund for the 22 survivors at a memorial service held in Launceston later that year. It was a major financial setback for James Henty and his brothers, but one from which they recovered. In a submission to the Governor of New South Wales dated 24 March 1840, the Henty’s summarised their work over the previous six years of establishing the Portland settlement stating. “Six stations have been occupied, one at Portland Bay three at the open country about 60 miles inland called ‘Merino Downs’ They have erected two houses at Portland Bay and two others at Merino Downs”.This nail is significant as part of the vessels original fixtures. The Children was delivering cargo intended for the Portland Bay settlement of her owners the James Henty brothers The wreck is also significant as one of the first vessels to have been lost in the Western District of Warrnambool. As a result the shipwreck of the Children is registered with the Victorian Heritage Register S116. Ship's nail, copper, with a washer attached. The nail has a round head, solid round shank and a flat end. It is bent, twisted and has indentations in the centre section. The nail was recovered from the wreck of the CHILDREN.warrnambool, flagstaff-hill-maritime-museum, shipwreck-coast, shipwreck artefact, the children, nail, copper nail, ship's nail, children shipwreck

Tin box, scratched, rusty, black colour in appearance with writing on internal lid. Two bulbs, small tin containing clips, nuts and bolt. Front of lid LAMPS, SIGNALLING DAYLIGHT BOX SPARE PARTS MKII PMG 1942, Internal Lid - IMPORTANT When fitting a new bulb it should be INCLINED as shown, so that washer may be readly inserted between the spring contact and bridge piece. lighting tongue in washer must be in correct position......to the front of the lamp and the stem must be pushed right back in slot. LAMPS SIGNALLING DAYLIGHT.signalling, daylight, short range, lamps, spare parts

Wooden base, leather reinforced, stitched canvas, inserted rope top, brass eyelets, rope handles, sliced one side, metal with spring clips the other side. Leather washer with copper rivets, Separate pocket inside.canvas, bucket, container, farm, churchill island

The board was probably from the School of Mines Library, located on the 1st floor of the Administration Building in Lydiard Street. Changes have been made to some times for Tuesday and Friday. The E J Tippett Library was opened in 1978 at the SMB Campus.Wooden board with bevelled and painted edge in blue-grey. Front surface painted black with gold coloured letters and numbers. Two bolts, washers and nuts for fixing, held in position by central wooden strip pinned on back by four screws.ballarat school of mines and industries, library, e. j. t. tippett

This came from the butcher's/baker's cart on display at the Slab Hut (Orbost Visitor Information Centre). The cart came from Sederlan's Bakery and had been used outside the premises as advertising. The original chassis had been added to extensively with shafts, wheels and tyres added. This axle appears to have part of the cart - either a baker's or butcher's cart.An axle from a butcher's cart. It has been painted red and is made of iron. The shaft is rounded in the centre with square sections near the ends. It has 2 U-bolts to attach the shafts to the cast springs. It has a set of washers at both ends.axle cart transport

This knife and scabbard belongs to Lindsay Fankhouser, who wore it on his ankle when he served as an engineer/ crewman in the RAAF (Iroquois and Hercules) during the Vietnam war. He used this knife many times a day while he was serving. The handle of the knife has an aluminium butt that is 18mm long and a bolster that is 19mm long. Between these there are stacked wooden washers. The pattern of the washers is three reddish brown, one white, one black, one white, eleven reddish brown, one white, one black, one white, three reddish brown. The butt has a flat end and a gentle curve downwards (towards sharp side). The handle has a context shape. The bolster has a concave shape. The blade is sharped from 3mm past the bolster. The blunt edge of the knife has a gentle curve inwards from about 55mm along the blade until the sharp point of the blade. There is a maker’s mark on the blunt edge of the knife near the point. It has been worn down and is now illegible.norway, norge, soallingen, knife, small knife, hunting, scabbard, sheath, vietnam, lindsay fankhouser, raaf

Mr W. H. (Billy) Lewis manufactured soft drinks and cordials of many types in his factory in Woods street south, Donald. An energetic man, Mr. Lewis built up a big business, and supplied surrounding towns and districts as well as shops and customers in the Donald and Watchem areas. In the later stages of operation he was assisted by his son Alf, who died in May, 1952. Mr. W. H. Lewis died in June, 1924. The patronage accorded to the Lewis products enabled Mr Lewis to keep the factory in full production for many years.Aqua codd-neck glass bottle. Four round indents above two neck side crimps. W. H. LEWIS DONALD moulded lengthwise on front. LEMONADE moulded horizontally on back. "M" moulded on base. Glass marble and rubber washer inside. Some inner stain.

Hand brake pawl, possibly from a cable or horse tram, smaller than an electric tram version consisting of a cast or forged pawl with a forged, turned and threaded bolt, steel washer and nut. Components have been removed from very rotten wooden floor. Possibly c1900tramcars, brakes, handbrakes

Fitted to the folding doors of a Z3 class trams to warn motorists that a passenger was about to alight or board and that they must stop. Sign shaped to be above heads of people waiting on platform stops.Demonstrates methods of warning motorists that they must stop when passing a tram.Sign - galvanised steel sheet with a baked white enamel paint finish and overlaid with a reflective white and red "Stop" Two samples held - one with a more extensive red section. Has three stainless steel bolts with washers on the right hand side to fix the sign to an opening door.tramcars, z3 class, signs, passengers, safety

The Improved Martin-Adelphi Anchor. The introduction of cast steel in 1894 led to the improved Martin-Adelphi pattern, in which the crown and arms are cast in one, and, with the stock, are made of cast steel, the shank remaining of forged iron. A projection in the crown works in a recess (right image), and is secured in its place by a forged steel pin, fitted with a nut and washer, which passes through the crown and the heel of the shank.Stock-anchor - improved Martins patent, Adelphi pattern improved Martins patent anchor, Adelphi pattern

This bag forms part of the Light Horseman’s KitThis is a leather container. The top section is double layered with two oval shaped slots. The bag section has a leather flap with 2 straps. The bag section can expand out to 50-60mm. The top section piece of leather forms the back of the bag. The straps and buckles are held in place with copper rivets and washers. ww1, australian light horse

Donated with the ABC Spinner washing machineBlue heavy paper cover with black lettering and an illustration of Model 60. Full title is 'How to operate the ABC Spinner -Spins Away Water -Spins Away Dirt. The Porcelain Washer -Manufactured by Altofer Bros Company Established 1909 Peoria Illinois Contents include parts price list and instructions for use'allansford, altofer brothers, abc spinner, washing machines, laundry aids

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, distant signal, signal, maritime signal, ball signal, signal shape, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal ball, day signal ball, ball signal, ball day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.distant signal, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

Eduard Lehman, Zurich Switzerland patented a metal barrel shaped hand washing machine with a hand crank to operate a metal plunger in 1919. Such hand washing machines were used by settlers in Moorabbin Shire An 83 year old Visitor on site remembers using this type of washing machine. He had to push the agitator for 5 minutes. Prior to his mother buying the washer, all laundry was hand washed in troughs.Such hand washing machines greatly reduced the workload of the women of pioneer familes in Moorabbin ShireThis hand washing machine c1919 consists of a metal barrel, standing on 4 legs, and has a hand crank to operate a cone shaped metal agitator.THE / LEHMAN/ COMPRESSED AIR AND / VACUUM WASHING MACHINE / Pat. No. 50614/30lehman eduard, hand washing machines, laundry equipment, pioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s. Metal hook combination is made from one and a half centimetre diameter metal in two pieces, with four centimetre circles on each end 40 centimetres long. They are joined at the top by a threaded section with a square nut, a thin metal washer and a one centimetre thick four centimetre wide square metal piece. Part of the Harris Collectionagriculture, farm, hanging hooks

Bag leather brown medical bag has leather handle at top connected by rings attached to a piece of metal at either end, a strip of metal in the centre with a round washer shaped object with a hole attached, on a metal frame which is squared off at the sides, stitching on the top and also both sides of the thick leather handle, four metal studs at each corner.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, medical bag

Set of 15 drawings, blue prints, plus cover bound into a book form titled "MTOC - Sheaves and Pins" providing a drawing of each type of cable car sheaves, pins and washers, includes title, dimensions and weight of each piece for use on the Melbourne cable tram system. Would have been taken from Drawing No. R3232, See Reg Item 354.Has old pencil notes on rear.trams, tramways, mmtb, mto co, cable trams, cables, winding houses

Blueprint of drawing No. R3232, titled "MTOC - Sheaves and Pins" providing a drawing of each type of cable car sheaves, pins and washers, includes title, dimensions and weight of each piece for use on the Melbourne cable tram system. See also Reg Item 353 for a book of these drawings. Drawing dated 23/6/1897, has been given a MMTB drawing number.On rear of drawing in red felt pen, "Cable car pins and parts" and in black ink "R3232"trams, tramways, mmtb, mto co, cable trams, cables, winding houses

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut and washer to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, six screw holes that were used to secure the bell to the roof and at one end the initials "TB" cast in - "Tramway Board".trams, tramways, conductors, bells, tramway board

Seward laryngoscope blade only. No light bulb is present in this item. Size1 for infants use. Minor scratches and dust around the piece. Some hit marks on top of the blade and base. Rusty washer under the joint base. Stamped on the base, lateral side: the trade mark details (PENLON), place where it was made (ENGLAND) and at the back side of the blade the type of blade (SEWARD) and the size (1). Stamped, REGD. TRADE MARK / PENLON / MADE IN ENGLANDblade, laryngoscope, seward, light bulb, size 1, penlon