Type used by RAAF Radar station Wilsons Prom (RS 14) for backup communications 1942 - 1946. This is an AR8 radio receiver with a brown face and various dials and switches; They functioned as a set and were manufactured in 1938 at the Ashfield, Sydney workshop of AWA (Amalgamated Wireless Australasia Ltd, later AWA Ltd), Australia’s largest electronics manufacturer and broadcaster. They are rare outside Australia as they were seldom exported to other air forces, and remained in service until the late 1950s.202 An AT5 transmitter and AT5 coupling unit are held in Sydney’s Powerhouse Museum.203 The three units in the Wilsons Promontory Museum were deployed by the RAAF in WWII and represent the types of communications equipment used at the 14 Radar Station, Wilsons Promontory. It is not known, however if these particular examples were used at the lightstation and are part of the same set. They have interpretive relevance to the collection, but their significance to the lightstation is dependent on whether they have a direct historical association with the radar station that operated there. The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.Radio tuning unit, brown metal face with multiple dials & switches.Yes

Type used by RAAF Radar station at Wilsons Promontory Lightstation (RS 14) for backup communications 1942 - 1946. This is an AT5 MF/HF 50 watts radio transmitter with black face and multiple dials and switches; There is also an AR8 radio receiver with a brown face and various dials and switches; and an AT5 radio aerial coupling unit with black face and dials and switches in the WP collection. They functioned as a set and were manufactured in 1938 at the Ashfield, Sydney workshop of AWA (Amalgamated Wireless Australasia Ltd, later AWA Ltd), Australia’s largest electronics manufacturer and broadcaster. They are rare outside Australia as they were seldom exported to other air forces, and remained in service until the late 1950s. An AT5 transmitter and AT5 coupling unit are held in Sydney’s Powerhouse Museum.The three units in the Wilsons Promontory Museum were deployed by the RAAF in WWII and represent the types of communications equipment used at the 14 Radar Station, Wilsons Promontory. It is not known, however if these particular examples were used at the lightstation and are part of the same set. They have interpretive relevance to the collection, but their significance to the lightstation is dependent on whether they have a direct historical association with the radar station that operated there. The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.Radio receiver, grey metal face with multiple dials & switches

Topics covered:Lists of achievements, officers, benefactors, accounts: priorities for 1983-4; Work featured includes Yarrowee River, Ballarat; Mount Worth; Wilson's Promontory & Port Campbell National Park, Mooramong heritage property,; donattion of first aid boxes by Ballarat School of MinesThis item is significant as it was the first annual report of a then fledgling organisation. It portrays the enthusiasm of board and volunteers to do work for the environment. A4 17PP booklet, black and white printing, 15 b/w photographsGreen and yellow cover featuring 'echidna logo' and text AUSTRALIAN TRUST FOR CONSERVATION VOLUNTEERS - FIRST ANNUAL REPORT 1982-3atcv australian trust for conservation volunteers yarrowee river ballarat mount worth wilsons promontory port campbell - national park - mooramong - first aid - ballarat school of mines

16. Pruning Day 1966 Aug 6. Nursery 2, 10,18. Orchard Sep 66. 4, 8, 9, 11-15 5, 6.Principal's garage and 3. Student class in the Orchard Oct 66. 1. labelled "River Yarra", 8 of Wilson's Promontory Camp 1966 Nov 66. 7. Garden view. 19. Stockman's cottage.pruning day, 1966, flowers, yarra river, rose garden, kneen family, gardens, wilsons promontory, excursion, nursery, orchard, principal's garage

Used as display in AMSA workshop foyer, Moorabbin, Vic. Nautical charts x 2 , The framed and glazed chart identifies strategic points in the notorious Bass Strait passage, which in the nineteenth century was known as the ‘Eye of the Needle’. It covers the whole of Tasmania, Bass Strait and the islands, and the lower part of Victoria with its coastline between Cape Otway and Gabo Island. The chart has an electric cord connecting it to a wall switch which enables a series of small lights to flash on strategic geographical locations.. While it is not known if it is original to Wilsons Promontory, it certainly elates to its location. A similar chart at Cape Otway shows less of Tasmania and is not electrified. Gabo Island Lightstation has two large framed charts; one is the same as the Wilsons Promontory example but without the lights and the other is entirely different, focussing on the east coast between Point Hicks and Montague Island. The Wilsons Promontory chart is unique as an illuminated version of the other charts and has first level significance if its provenance to the lightstation can be confirmed.The framed and glazed chart has an electric cord connecting it to a wall switch which enables a series of small lights to flash on strategic geographical locations.Yes

Type used by RAAF Radar station (RS 14) for backup communications 1942 - 1946. This one is an AT5 radio aerial coupling unit with black face and dials and switches. They functioned as a set and were manufactured in 1938 at the Ashfield, Sydney workshop of AWA (Amalgamated Wireless Australasia Ltd, later AWA Ltd), Australia’s largest electronics manufacturer and broadcaster. They are rare outside Australia as they were seldom exported to other air forces, and remained in service until the late 1950s.202 An AT5 transmitter and AT5 coupling unit are held in Sydney’s Powerhouse Museum.203 The three units in the Wilsons Promontory Museum were deployed by the RAAF in WWII and represent the types of communications equipment used at the 14 Radar Station, Wilsons Promontory. It is not known, however if these particular examples were used at the lightstation and are part of the same set. They have interpretive relevance to the collection, but their significance to the lightstation is dependent on whether they have a direct historical association with the radar station that operated there. The units will have first level contributory significance if it is confirmed they were used at the Wilsons Promontory Radar Station.radio aerial coupling unit grey metal face with multiple dials & switches

The telescope is original to the Wilsons Promontory Lightstation and was provided by the Department of Shipping and Transport in about 1900. The device magnifies images of distant objects through its curved interior mirrors, and lightkeepers used this telescope to monitor and record the names of ships, the time they passed, and their direction, as well as read meanings of flags and other visual signals communicated by vessels. The telescope is similar to Cape Nelson’s two metre long telescope, which is included in the VHR registration for the Cape Nelson Lightstation. It is particularly important for its good condition, completeness and confirmed provenance and has first level contributory significance to the cultural heritage values of the lightstation..1 Brass telescope, cylindrical tube shape with mobile interfolding sections. Middle section of tube has been covered with textile or leather and painted black. Narrow plaited rope fixed as a border to this section is also painted black. .2. The telescope is attached by a brass fitting to a wooden tripod on a three legged triangular ply wood base with three castors.

John L. Sutherland graduated in 1954. See B09.0004(42) photograph of him.1. 10 black and white photographs, some with inscriptions, in Ilford Films paper packet - Burnley and Wilson'd Promontory excursion. 2. Black and white negatives from Kodak packet containing 76 negatives, proofs made and scanned - Burnley and excursions. 3. Kodak packet containing roll of 35 negatives - Burnley and Dinner Dance.4. Cardboard Kodak negative box with roll of 34 negatives - excursion to Wilson's Promontory.5. CD of scanned 3 and 4. j. l. sutherland, students, wilson's promontory excursion, administration building, pruning, helen eastman, glasshouses, cacti, students working outside, cricket, luffmann ponds, horses, orchard, insid, students in class, locker room, changing room, excursions, dahlias, tractor, royal agricultural show, student outside classes, speech day

18 slides 1960-1964. 1. "Pep Talk" Feb 1960 (Wilson's Promontory?) 2. "Undeveloped land (mowed) Ryde S of H 17.3.61". 3. "Burnley Hort College Feb 1962". 4. "BHC Vege Ground 1963", 5. "Cow Paddock New Plantings. 4, 6, 15, 16, 19. Orchard 1963". 3, 7-11, 13, 14. Garden views Sep 63. 17, 18. "Second Year Students 1964-Mildura".burnley horticultural college, cow paddock, plantings, garden views, students, bhc, lagoon paddock, vegetable plots, mildura camp, orchard, wilson's promontory

E.L. Bruce, born in Ireland on July 1,1854, came to Australia in 1854 and joined the Lands Department. He spent most of his service in Gippsland. The journey to Sale then was made by ship to Port Albert and thence on horseback. He began his service in Gippsland as assistant district surveyor and for the last 12 years before retirement he was district surveyor and land officer. His territory extended from the boundary of Victoria in east Gippsland down to Wilson's Promontory with his headquarters at sale.This map is a useful reference tool.A survey map - Sheet No 3 SnowyRiver Survey. This is a copy of the original survey. It shows the properties of W.J.T. Clarke - two in Orbost and one in Newmeralla (sic),. it has a faded, undecipherable red stamp in the bottom right corner.Gipps Land Rivers No 32B E.L. Brucesurvey bruce-e.l snowy-river-c19th

A booklet of a list of excursions that was arranged for the visiting members of the British Association for Advancement of Science which included Marysville. These excursions were conducted in August 1914. They included geological excursions as well as excursions to local attractions to observe the flora and fauna found in and around the various destinations. The excursions were to Bacchus Marsh, Marysville, Warburton and Cement Creek, the Macedon District, Emerald, Ballarat and the local district, Bendigo and surrounds, Wilson's Promontory, and the Central Research Farm at Werribee. There is also a chapter on other places of interest in Victoria which includes Mount Buffalo, the Gippsland Lakes, the Buchan Caves, Daylesford, Lorne and Sorrento.A booklet of a list of excursions that was arranged for the visiting members of the British Association for Advancement of Science which included Marysville.victoria, british association for the advancement of science, bacchus marsh, marysville, warburton, cement creek, macedon, emerald, ballarat, bendigo, wilson's promontory, central research farm werribee, werribee, mount buffalo, gippsland lakes, buchan caves, daylesford, lorne, sorrento

The circular cast iron object is a lid that was originally fastened into a ship tank. This particular lid is cast with the name ‘Lancaster & Co Bow London E’ in capitals in a continuous circle on the outer edge of the lid face, and has the words ‘Bow Tank Works’ on the inner circle. It is the same type of round heavy lid that was made by tank manufacturer John Bellamy although it may be a younger example. According to Pearson, the Lancaster & Co firm produced tanks between 1910 and 1930 from their works in Bow, East London. It was possibly preceded by the company, Lancaster & Bawn, which ran between the 1870s and 1890s.Pearson has collected a list of Lancaster & Co tank lids that he and others have sighted at various locations in Australia including Coolgardie, WA; Gulgong Museum, NSW; the Quarantine Station, Sydney NSW; Blundell’s Cottage, NSW; and Woolmers homestead complex, TAS. In addition, Lewis has identified lids at Ayrdale, NSW, and the shearing shed at Murndal homestead, Western Victoria. It is most likely that more than three lids survive in Victoria and more will be identified, however, as noted by Pearson, ‘surviving lids are far less numerous than the tanks themselves, presumably because the uses to which the tanks were put did not require the lid to be retained’.Parks Victoria has identified five tank lids in the lightstation collections. There is another Lancaster & Co lid at Cape Otway and possibly a second example there as well. In addition there are Bellamy lids at Point Hicks and Cape Otway and an unidentified lid at Wilsons Promontory, and a tank without a lid at Wilsons Promontory. The Lancaster & Co ship tank lid has first level contributory significance for its historic values.Circular cast-iron disc, with raised outer ridge with inscription and inner depression with inscription. One metal section forms a handle over an inner depression.Around perimeter of outer edge "BOW LONDON.E LANCASTER & CO " Around inner area "BOW ANK WORK"

1. "Drive (After) from P.R.I" Feb 67. 2-5. Students learning how to use a machine in the Orchard, 6, 7.Former Nursery, 8. Garden view. Mar 67. 9-14. Emily Gibson beds. Jun 67. 15, 19,26, 27. Plant Research Institute. "June.5.1967" 16, 17. Pruning Day 1`967. 18.Unidentified development on Campus Jul 67. 20. "Nangiloc - Fixed Sprinkler Rock Melons" Oct 67. 22. Yarra River.24. Former Rose garden (now Herbaceous Border.) 28-35 Wilson's Promontory.students, machine, garden views, campus, entrance, plant research institute, old rose garden, nursery, nangiloc, fixed sprinkler, rock melons, wilson's promontory, seed testing station, pruning day, emily gibson beds

The desk was used by the head keeper and supplied by the Public Works Department, and possibly dates to when the lightstation commenced operations in 1884. Closer inspection of the wood may reveal the Crown motif and PWD monogram on the side or underpart of the furnishing. The PWD operated in Victoria from 1855 to 1987 and was responsible for the design of Victoria’s major public buildings and infrastructure as well as the supply of stores, furniture and equipment. The desk is identical to the large example remaining at Point Hicks. A smaller version, which is at Cape Schanck, has two sides stamped with the crown motif and PWD monogram. Another of the smaller desks formerly at Cape Schanck is now missing. Gabo Island has a small cedar desk or table in the same style, but with one drawer. There are also c.mid‐twentieth century desks remaining in the collections at Wilsons Promontory and Gabo Island. The Cape Nelson desk has first level contributory significance for its provenance and historical value as a government issued furnishing that is original to lightstation’s head keeper’s office.The large, late nineteenth century cedar desk has two drawers, leather inset top and sturdy turned legs. The drawers each have a pair of wooden knob pulls.

Used to signal ships from lightstation. White flags are semaphore flags used for signalling alphabet letters. Salvaged from junk pile and mounted on wooden block. The identical, white hand held flags, which were used as a pair, are each stapled to a dowel. Information on both items indicates they were made by a well known flag, pennant and banner makers, Evan and Evans who were then located at 680 Elizabeth Street, Melbourne and are now in Spencer Street West Melbourne. Founded in 1877, the firm was a co designer of the Australian Flag in 1901. The flags are likely to date from c.1960 - 70 and are currently displayed in the former Keepers' quarters/ weather room mounted on a wooden block. Similar pairs of semaphore flags are held in Wilsons Promontory and Cape Nelson collections. The flags have second level contributory significance for their provenance to the lightstation and flag makers Evan & Evans. Thet have historic value for increasing our understanding of the semaphore signalling system formally used at the lightstation.Two identical white fabric flags stapled to a wooden dowel and secured to a wooden base on an angle.They have blue writing, on tags, on the flags.On tags on both flags, "EVAN & EVANS FLAGS P/L / FLAGMAKERS / 680 ELIZABETH ST / MELB. 3000 3475755"

This fairly substantial wooden desk with vinyl top was issued to Wilson’s Promontory Lightstation by the Department of Public Works in the 1960’s. Primarily the desk was used for correspondence purposes, and now has the Bureau of Meteorology computer stationed on it. Although the design and make of this desk is common to many lightstations across Victoria, it is a good example of the kind of furniture that was provided to Victorian lightstations in the 1960’s. The solidly constructed desk was used in the lightstation office. It is made of honeycoloured hardwood and has a green vinyl top and three drawers on the left side. The style suggests that it may date to the 1960s. Gabo Island Lightstation has two identical desks, and all were probably standard issue from the Commonwealth Lighthouse Service or Public Works Office. Another twentieth century vinyl topped desk at Gabo is manufactured with a steel frame. Cape Nelson, Cape Schanck, Point Hicks and Gabo Island retain nineteenth century cedar desks. The desk at Wilsons Promontory has second level significance as a good example of the style of office furnishing provided to lightstations in the 1960s.Wooden desk with square legs and green vinyl top. It has three drawers with wooden handles on the left . The top drawer has a keyhole.

Probably used in the past to house the Signal Flag set at the lightstation. Appears to have been stored in the old stables for a number of years.The rectangular wooden cabinet has the distinctive features of a flag locker, comprising numerous open compartments of the same size each for storing a signal flag of a unique design. It has three internal shelves and a bench top, and is painted grey, a colour that is used for many of the wooden utilitarian furnishings in the six lightstations Parks Victoria manages. The cabinet, without its flag contents, was found in storage in the old stone stable building and is highly likely to be original to the lightstation. A wooden flag locker is held at Wilsons Promontory Lightstation. A wooden locker comprising two sections of 16 pigeon holes and four cupboard doors is held at Cape Otway The two flag lockers at Cape Nelson Lightstation are included in Victorian Heritage Register for contributing to the significance of the lightstation. The Nelson, Otway and Promontory lockers have associated sets of flags which are original to the lightstations. The Gabo Island cabinet has second level contributory significance for its provenance to the lightstation.Timber cabinet painted grey, partitioned with numerous open compartments of the same size .

The large cedar desk was formerly used by the head light keeper at Point Hicks. It was made in the nineteenth century, probably by the Victorian Public Works Department (PWD) as an item of standard issue for use in government offices. The PWD operated in Victoria from 1855 to 1987 and was responsible for the design of Victoria’s major public buildings and other infrastructure including the supply of stores, furniture and equipment.The desk has turned legs, leather top and two drawers each with a pair of wooden knob hand pulls and is identical to the large desk remaining at Cape Nelson. A smaller version is at Cape Schanck, and another desk formerly at Cape Schanck is not able to be located. Gabo Island has a small cedar desk or table in the same style. Two sides of the Cape Schanck desk are stamped with the crown motif and monogram of the PWD but it is not known if the Point Hicks desk and the other nineteenth century examples are stamped with these details. There are also c.mid-twentieth century desks remaining in the collections at Wilsons Promontory and Gabo Island. officeThe Point Hicks desk has first level contributory significance for its historic values as government issued furnishing that is original to lightstation’s head keeper’s. Early, large two drawer cedar desk. Each drawer has two wooden handles. Leather insert on top of desk is worn. Commonwealth of Australia, Dept of Transport stamp with stock number on side of desk.On label on side, "C. of A. / D. O. T. / 143581"

Lid for ship's tanks used for early domestic water storage (1860's) at the lightstation The water tank and lid are probably from the same unit that was used for transporting drinking water or perishable dry goods on ships. The unit comprised a large, riveted metal tank which was fitted with a heavy cast iron round lid to form a hermetically sealed container. It had a rubber sealing ring ‘which was screwed tight with the aid of lugs cast into the lid and wedges cast into the rim of the loading hole’. A raised iron rod welded across the outer face of many lids allowed for screwing the lid tight. Ship tanks were invented in1808 by notable engineer, Richard Trevithick and his associate John Dickinson. Their patent obtained the same year described the tank’s superior cubic shape that allowed it to fit squarely as a container in ships and thus use space efficiently, while its metal fabric preserved and secured its contents, whether liquid or solid, from damage. The containers revolutionised the movement of goods by ship and made wooden casks redundant. Research by Michael Pearson has determined that they were carried on passages to Australia from at least the 1830s, conveying ships’ victuals and water storage as well as general goods heading for the colonies, and by the 1870s they were in common use. Once in the colonies, the tanks were often recycled and adapted for many resourceful uses such as water tanks, packing cases, dog kennels, oil containers and food stores and this invariably led to the separation of the lid and tank. Raised lettering on the lids indicates that nearly all of the ship tanks transported to Australia came from London manufacturers, and it was usual also for the brand name to feature as a stencil on the associated square tank but in most cases this eventually wore off. It is not known if the Wilsons Promontory tank retains its stencil, and the heavy lid will need to be turned over to reveal its manufacturer’s name. How it came to the lightstation is also not known, but it was either brought to the site as a recycled tank or salvaged from a shipwreck. Pearson writes that Ship tanks show up at a wide range of sites, many of them isolated like lighthouses. They were, I think, usually taken there for the purposes they filled, usually water storage, as they were readily available, relatively light to transport, and probably very cheap to buy as second‐hand goods containers. In rural areas they may have been scavenged for their new uses from local stores, to whom goods were delivered in them. Recycled to serve as a water tank, the Wilsons Promontory tank is the last surviving example of several that were used at the site to hold water for domestic consumption. The tank has had its lid removed and a tap fitted to the one of the sides. It stands on concrete blocks next to a building to receive water running off the roof via a metal pipe. Wilsons Promontory is the only lightstation managed by Parks Victoria with a tank container, although Cape Otway and Point Hicks have lids. Parks Victoria has identified four other lids which include two at Point Hicks, one manufactured by Lancaster and Co. the other by Bellamy. Cape Otway also has two, one unidentified and the other by the Bow Tank Works, East London, which produced tanks between 1910 and 1930. Pearson notes that ‘surviving lids are far less numerous than the tanks themselves, presumably because the uses to which the tanks were put did not require the lid to be retained’. The tank and lid, which are possibly part of the same unit, have first level contributory significance for their historic values and rarity. Round ship's tanks lid, iron.

Ferdinand Von Mueller came to Australia at the age of 22 arriving 15/12/1847 with his two sisters in Adelaide. He started work as an assistant chemist and in his spare time investigated the local vegetation. In 1852 he moved to Melbourne. From 1853 - 1896 when he died, he was the Victorian Government Botanist and Director of the Melbourne Botanic Gardens. He went on a series of expeditions to parts of Victoria including Mount Buffalo and Wilson's Promontory. He travelled all over Australia in various expiditions. In 1863 he was engaged to Euphemia Henderson for 6 months. Euphemia was a wildflower artist and painted bunches of flowers for Mueller. They allocated specimens at Phillip Island (1863) - one named Nematolepis euphemiae F Muell was named for her. Euphemia's sister was Gergianna who married John David McHaffie of Phillip Island. Euphemia lived with the McHaffies on Phillip Island. Her Wildflower art has been adapted for a range of plates and mugs produced in partnership with the Royal Botanic Gardens and Maxwell & Williams, called the Euphemia Henderson Collection.Large Black & White photograph of grave and monument of Ferdinand Von Mueller in St Kilda Cemetery.Handwritten on the bottom of the photograph: "Grave/Monument St Kilda Cemetery. Ferdinand Von Mueller. Photographer: Alan West Oct. 1994.ferdinand von mueller, baron ferdinand von mueller, miss euphemia henderson, georgianna mchaffie, john david mchaffie, alan west

Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse. His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large rusted iron pulley, large loop at one end and smaller loop at the other. No hook.(Sheave Block)

Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.180 The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse.His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large iron pulley with loop at one end and hook at the other, rusted.

This portable, hand held visual signalling lamp was used for optical communication via Morse code. It comprises the metal encased Aldis lamp with electrical cord and its associated green-painted, hinged wooden carrying case, which has a metal clasp and leather hand grip. Larger versions of these lamps are fixed on ships or pedestals and have shutters on the front that are opened and closed to transmit signals. Smaller hand held versions like the Point Hicks example have a concave mirror that is tilted to focus the light into pulse signals via a trigger. The lamps were pioneered by the British navy in the late nineteenth century and continue to be used to the present day.317 Details on the Point Hicks lamp include a serial number and other information. Another Aldis lamp and case remaining at Cape Nelson Lightstation dates to 1960 and has the initials of the Department of Transport, which at that time incorporated the Commonwealth Lighthouse Service. Wilsons Promontory also has an Aldis lamp and case that dates from around the same year. A lamp formerly at Cape Schanck has disappeared. The Aldis lamp and associated case at Point Hicks has first level contributory significance for its historic values and provenance to the lightstation. PHLS0007.1 Hand held signal light. Painted metal trigger with attached black electrical leads with battery terminals at end. Inscriptions on metal of lantern. PHLS0007.2 Hinged lid, wooden box painted army green to house signal light. Metal plate with inscription on front of box.PHLS0007.1 "D^D / LANTERN PORTABLE SIGNALLING / ADMIRALITY No 5110D / SERIAL No 5482 YEAR 943 / AMALGAMATED WIRELESS / A ASA LTD / 9792-100" •PHLS0007.2 "20 K4 transporting lantern / admirality pattern no 91108"

The Victorian Naturalist is a bimonthly scientific journal covering natural history, especially of Australia. It is published by the Field Naturalists Club of Victoria and is received as part of the membership subscription of that club. From 1881, club proceedings and papers had been published in the Southern Science Record and Magazine of Natural History before the first issue of The Victorian Naturalist appeared in January 1884. The journal publishes peer-reviewed research articles, research reports, "Naturalist Notes", and book reviews. The journal was published monthly until 1976, since then it has been published bimonthly. In that period several special issues have been published. These covered particular natural history topics or significant centenaries: of the club (1980), the death of Ferdinand von Mueller (1996), and the establishment of Wilsons Promontory National Park and Mount Buffalo National Park (1998). The journal was abstracted and indexed by Scopus in 1980 and 1984 and from 2008 to 2014. In 2001 there was a special issue on Sir Frederick McCoy, KCMG who was the first president of the club. Sir Frederick was an Irish paleontologist, zoologist, and museum administrator, active in Australia. He is noted for founding the Botanic Garden of the University of Melbourne in 1856.A journal that is still in publication today from it’s original inception in 1881 as part of a membership subscription to the Field Naturalists Club of Victoria. The journal is a significant publication with articles documenting issues and and other subjects relating to the subject of natural history.Two journals of "The Victorian Naturalist" Vol 10 & 11 May 1893 -March 1894 Edited: F G A Barnard Published: Walker May & Co Date: 1894 Label on spine with typed text RA 574.9945 VIC Inside front cover a sticker with Warrnambool Mechanics Institute and Free Library warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, book, the victorian naturalist vol 10, journal, australian naturalist, sir frederick mccoy, melbourne botanic gardens

The two semaphore flags were used as a pair for visual signaling by hand. The semaphore system is an alphabet signaling system based on the waving of a pair of handheld flags in a particular pattern to compose words to be communicated to passing ships. The system was introduced by the Royal Navy in 1880 and was later adopted in Australia, with the first School of Signaling opening in Williamstown in 1890. The system was superseded in the 1970s by more sophisticated methods of communication. Information on the Cape Nelson flags indicates that they were made by Evan Evans P/L, Flag makers, 690 Elizabeth Street, Melbourne. Evan Evans (d.1927) started a tent‐making business in 1877 and by 1920 Evan Evans P/L maker of canvas goods, was located at 680 Elizabeth Street, Melbourne. In 1924 it acquired land at 632 Bourke Street and built a new factory. His son Ivor continued the business after 1927 and in 1938 opened a bulk store in Carlton.271 In 2016 the firm was located at 673 Spencer Street, Melbourne. Another pair of white semaphore flags made by Evan & Evans is held at Gabo Island, and Wilsons Promontory also has a pair. Cape Nelson’s white semaphore flags have second level contributory significance. They have historical importance as flags formerly used at the lightstation for visual signaling, a system that is now rarely used in navigation, and contribute to the importance of the lightstation’s large collection of flags.A pair of white flags made of white canvas/heavy cotton, the square flags are attached to dowel poles with staples.

This portable, hand held visual signaling lamp, with trigger mechanism and inner reflective disk, was used for optical communication via Morse code, with the concave mirror tilted to focus the light into pulse signals. Larger versions of these lamps are fixed on ships or pedestals and have shutters in front of the light that are opened and closed to transmit signals. Smaller hand held versions like the Cape Nelson example have a concave mirror that is tilted to focus the light into pulse signals, and despite their size the lamps were renowned for their brilliant light. Invented by Arthur C W Aldis (1878‐1953) and pioneered by the British navy in the late nineteenth century, they continue to be used to the present day. Details on the Cape Nelson lamp include a serial number, a date of 1960 and the initials of the Department of Transport, which at that time incorporated the Commonwealth Lighthouse Service. Another lamp of the same date which is held at Wilsons Promontory was provided to the lighthouse by the Department of Shipping for signaling ships but was also used for communicating with Cliffy Island, 18 nautical miles away. Point Hicks also has an Aldis lamp and an associated case, which is painted an army green colour. A fourth lamp and case formerly at Cape Schanck disappeared from the collection sometime between 1995 and 2003. These types of lamps are not rare in museum collections.These types of lamps are not rare in museum collections however the Cape Nelson example has a reliable provenance to the lightstation and has first level contributory significance as a fine example of the Aldis lamps that were distributed to lightstations throughout Victoria and Australia.This object is comprised of a black metal encased Aldis lamp with electrical cord and associated wooden carrying case with metal clasp and red leather hand grip. yes

The seven weights (0008.4 and 0136.3) are circular in shape with a hole in the centre and a groove cut across the radius. They were specifically designed to fit into a weight tube, which allowed movement of the weights that were used for driving the clockwork mechanism for turning the lighthouse lens. They are most likely original to the Chance Brothers system installed in 1913, which was originally equipped with a set of ten, each weighing around thirty kilograms.The weights were moved vertically in similar fashion to the way weights move on a grandfather clock. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. Lighthouse keepers had to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, weights became obsolete and the motors were able to turn the optic for as long as there was power to drive them. Wilsons Promontory’s Chance Bros. kerosene operated light, which was turned by a clockwork mechanism, was replaced by small electric motor in 1975, reducing the number of keepers and eliminating the need for weights. Cape Schanck has a set of fourteen weights remaining in situ in the lighthouse weight tube as well as another four detached weights, two of which may be associated with the 1859 mechanism. A small number of detached cast iron weights and two associated rods remain at the Point Hicks Lightstation and one weight is displayed in the lantern room at Cape Otway.The Wilson Promontory weights have first level contributory significance for the insights they provide into the technology and operations of a late nineteenth/early twentieth century lighthouse which has since been superseded. They are well provenanced and are significant for their historical value as part of the lightstation’s Chance Brothers optical system installed in 1913.Four circular disc shaped lead weights, all with a narrow section cut out to the middle of shape. (as in slice of cake)

The ‘Resumatic’ brand, British made, lightweight device comprises a red pulley with attached length of white rope and harness. Information on the item indicates that it was the property of the Department of Transport, Australia. The Commonwealth Lighthouse Service was associated with the Department of Shipping and Transport in 1951 and the Navigational Aids Branch of the Department of Transport in 1972 so the harness may date to this period. The easily operated descent device was used for automatic, controlled descents from overhead structures, such as towers and other buildings and did not require a power source or tools. The user needed to make sure the unit is secured to an anchor point so that the cable could be dropped to the ground. As soon as it was secured the user could put on the support harness, step off the edge and travel down to safety. The device complements a number of other items of rescue equipment held in the wider Parks Victoria lightstation collection which attest to the dangers inherent in lightstation work and necessity for first aid kits, resuscitators, life buoys, life jackets and other devices such as harnesses and pulleys used for moving people. These include a bosun’s chair and harness with pulley, Royal Flying Doctor first aid cabinet, resuscitator kit and case, first aid kit, lifebuoy and cork fragments x 4 all in the Gabo Island collection; a rescue basket, resuscitation kit and case, and pulleys and ropes at Cape Otway; rescue stretcher made of bamboo at Wilsons Promontory; and a rescue anchor at Cape Schanck. The Cape Nelson rescue harness, although unique in the broader lightstation collection, is a relatively common device that is still manufactured more or less the same in England. It has second level contributory significance for offering insights into the various methods used in rescue operations by Victoria’s lightstations.Length of white rope attached to a harness and a red pully device.yes