Divers Knife, rare first class Ca 1900 (wooden handle) Siebe Gorman diving knife, two edge blade, and a push-in brass scabbard. The leather carrying strap is missing. The blade is imprinted Siebe Gorman & Co. Wooden handle is cracked. "3" on scabard.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The kerosene lamp was one of the most common oil lamps used and was manufactured until the 1980s. An anchor lamp like the lamps in this pair would be raised on the highest ship mast at night to signal other seafarers that the ship was at anchor or sailing at night. The metal loops on opposing sides of the lamp could hold a pair of rods or ropes. and be used to raise the lamp.The lamp is made to the design of a 19th and early 20th-century kerosene anchor lamp carried as essential marine equipment and used as a signal lamp on sailing ships. Lamps; a pair of cylindrical kerosene anchor lamps. Each has a flat back, a hinged door, a metal handle and two metal loops or guides fixed on each side. The glass window is convex and inside the lamp is a wick in an enamel wick holder.brass lamp, lamp, anchor kerosene lamp, kerosene lamp, marine equipment, marine lamp, navigation, light, ship light, ship lamp, lantern, maritime, nautical, safety lamp

This handmade barrel sling has been crafted and used for hoisting barrels onto ships.This handcrafted barrel sling is an example of the ropework that sailmakers are skilled in. It is typical of the equipment carried on ships in the 19th and 20th centuries and used at docks for loading and unloading the cargo.Barrel sling; handmade hemp fibre ropework formed into a sling to support and carry a barrel or cask.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, barrel sling, ropework, cargo handling, loading sihps, dockside handling, freight handling

First State Watch Factory: This factory was founded in 1930 under orders from Joseph Stalin, the "First State Watch Factory" was the first large-scale Soviet watch and mechanical movement manufacturer in the USSR. Via its USA-based trading company (Amtorg), the Soviet government bought the defunct Ansonia Clock Company of Brooklyn, New York in 1929, and the "Dueber-Hampden Watch Company of Canton", based in Ohio. The soviets moved twenty-eight freight cars full of machinery and parts from the USA to Moscow in order to establish the factory. Twenty-one former "Dueber-Hampden" watchmakers, engravers and various other technicians helped to train the Russian workers in the art of watchmaking as part of the Soviet's first five-year plan. The movements of very-early products were still stamped "Dueber-Hampden, Canton, Ohio, USA" (examples of these watches are very collectible today). In 1935 the factory was named after the murdered Soviet official Sergei Kirov. During the second world war, as the Germans closed in on Moscow in 1941, the factory was hurriedly evacuated to (Zlatoust USSR). By 1943 the Germans were in retreat, and the factory was moved back to Moscow, adopting the "First Moscow Watch Factory" name. In 1947 the first wristwatches under the brand name "Pobeda" and the first Marine Chronometers and Deck watches were produced. By 1951 the production of wristwatches had increased to 1.1 million. In 1975 new machinery and equipment for manufacturing complex watches were imported from Switzerland. The first chronograph called "Okean" (3133) was produced for the space station "Soyuz-23."The Chronometer is of recent manufacture and an excellent example of the type of instrument used to navigate the seas in the 19th century. It is of good quality and of a type regarded as very accurate and well made. The maker, First Watch Factory, has a dept that is still producing the "8916" standard Chronometer for horologists and collectors. Marine chronometer of Russian make in wooden case, metal handles on sides, inscription on a metal plaque on the front of the case. Polished square wooden outer case with green felt lining and, a leather carrying strap and buckle. Outer case is hinged and has a metal latch on the front. Outer case has a red velvet covering with a button and loop closure. Inscription on box are in Russian & translate as follows: ХРОНОМЕТР, = CHRONOMETER МОРСКОЙ, = NAUTICAL ГОСТ, 8916-77 = Gost ЛОЛ ЕТ, on dial face = LOL ETflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chonometer, russian, watch factory, marine, navigational instrument

Wooden Ammunition Box with webbing & metal handles with metal spring lock clip. Canvas hinge painted brown. Webbing carry straps in 3 locations. Box assembled with wood and small nails. Inside box is a wood divider running length ways .Unpainted.side 303cc (in White), rectangle with 500 cartges,.303 ball, MF cc 9-4-52 MK7 (in Yellow) Governement Explosives W^D 6 six (in White) Opposite side; Tropic Treated Charger clips (inred/pink paint) 500 cartges/.303 Ball/MF cc 9-4-52/ MK7ammunition, 303, ball, 1952, mk7

This boat hook head is in very good condition and has been manufactured. It would be attached to a pole or handle to give it a long reach. A boat hook is a common piece of marine equipment and many have been made by boat owners to suit their own purpose. They would also have been forged byblacksmiths and shipsmiths and have been available from ship's chandlers over the centuries. A boat hook can be used for many situations such as catching mooring ropes and chains, reaching rigging, pulling things or people out of the water, and a variety of fishing applications.This boat hook head is an example of equipment carried on vessels over hundreds of years for safety purposes and for general applications. Marine boat hook head, all brass. The body is a conical shape with a pointed end and curved, horn-shaped hook moulded into the side. The body is hollow until it reaches the hook's height. A screw hole is close to the base, in line with the hook.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, boat hook, marine, fishing, boating, equipment, boat hook head, rigging, safety equipment

Object. Small rectangular leather case for carrying Freemason Regalia with gold monogram F. G. J. (F.G.Jones) on lid. Leather handle, 2 locks marked British made Pat. No. 236734. Lined with blue silk with pocket. 5 small studs on bottom. Complete with 2 keys. Marked Genuine Cow Hide.societies, freemasons, regalia, f. g. jones collection, masonic regalia case

Carry case for a slide projector. Reinforced grey and white cardboard with a plastic handle and metal clips on sides to clip onto base of projectorBraun Nurnbergcarry case, slide projector

The Gladstone bag was first developed in the mid 19th century and was named after British politician William Gladstone, a four-time Prime Minister of the United Kingdon. Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Leather gladstone bag with leather handle and leather strap. Lining of bag is torn. Base of bag carries the words 'SOLID LEATHER' and the number '20'. surgery

These hoes were the standard thinning tool for sugarbeet, and allowed a standard space between seedlings. Thinning was back-breaking work, usually carried out by a transient work force.These hoes are probably still commonly in the possession of old gardeners. They are important as the only tool required of a large, transient workforce that worked under extremely difficult conditions.A metal thinning hoe of four piece construction, with a turned wooden handle attached to the tool by a nail. The blade is welded onto a bent holder, which is in turn welded to the metal extension of the handle. There is cloth inside the ferrule.sugarbeet

Electric stainless steel iron with a detachable handle and plastic grip. At the back of the handle is a two (2) prong socket to connect to power outlet via a flex/cord. The back of the iron has a plastic extension bolted on. On the plastic extension the mark "Southern Cross ESSCO porcelain co. Aust.". The iron sit inside a black leather carry case. The iron was used by Clarice Patience Reid.handcrafts, equipment, iron

Thought to have been made and used by one of the two Struss brothers who were both carpenters in Scotland before coming to Victoria in 1848 and 1854. They dealt in hardware, living and selling in Walhalla, Woods Point and Matlock. It finally became the property of Elsa Struss of South Yarra, the sister-in-law of the donor. Many tradesmen had chests such as this to carry and store tools.Large wooden box/trunk, painted Mission Brown. Three tin braces support each corner joint. Four hinges, two at the back and two inoperational at the front. Lid corners and edges braced with tin strips and shaped corners. Loop and hasp at front. Metal handles on the side. Pink paint on base.trades

This carry bag was used in the 1980's to carry items bought at the Healesville Sanctuary Shop. Many bags have been used since the inception of the shop and this is one of many used over the years. It is interesting to note that paper was used widely throughout the early years and in latter years as the Sanctuary became more dedicated to preservation of the environment, more environmentally-friendly materials have been used.This is a white paper carry bag. The illustration in black and white is of a family group of grey kangaroos; 5 adults and joey. A light green basket-weave pattern forms the background. It has rafia handles and is inscribed with the name of the Healesville Sanctuary underscored in red.Inscription on the lower edge of the paper bag reads "HEALESVILLE / SANCTUARY / A TRULY AUSTRALIAN EXPERIENCE". On the underside of the bag it reads "For Re-order B.S.B. (03) 801 9255"paper-bag, shop, healesville-sanctuary, grey-kangaroo, kangaroo, 1980's

Brown grained leather - crocodile imprint. Metal attachments; one leather handle. 2x 180mm long straps- 20mm depth. Top opening. Inside tag reads split leather & makers name. Bag folds in to middle . Central lock & handle. Latch to fasten each end of metal trimming. Fabric lining in mid brown colour/ fair condition.John Jackson & Co.P.L. Melbourne , Victoria 1891-1901-1937

Suitcase brought by Dutch immigrant.The fact that the owner reinforced and mended the suitcase suggests the Dutch trait of taking care of things and making them last. The stencilled initials suggest this case was probably stored in the hold.Brown painted suitcase of reinforced oilcloth with metal handle and two metal locks. A small door lock has been added to the lid which has been reinforced on the inside by a timber slat. A plywood slat has been added to the handle side of the case. The rims of lid and case are made of metal, as are the corners. The papered interior of both case and lid shows a small floral pattern in black and beige although, as part of the reinforcement, a coat of brown paint has been added to the inside of the lid and case, but not the bottom. Of the two straps designed to hold down the contents one is still in place, but the other has been replaced by a length of elastic. The original strap is made of cotton, now a dirty white with blue edging, and does up with a small metal buckle. The interior of the case shows a lot of wear and tear with evidence of multiple repairs. A small black metal chain holds up the lid, the corresponding one on the opposite side is missing. On the inside: the timber slat carries the name A.T.A. RIJKEN in black ink and also on a black Dymo label. On the outside: the handle side displays the initials A.T.A.R. and the figure 3 in white stencil. The lid bears evidence of a label in the bottom left hand corner. The lock, added by the owner, is 3cm in diameter and branded ELZETT Made in Hungary.luggage

Liberation Day still looms large in the Dutch consciousness and would have done even more so a mere 10 years after the event. All kinds of commemorative articles were produced.A smallish mug used for drinking milk. It is decorated with items celebrating 10 years since the Liberation from German occupation. There is no handle.Dutch coat of arms including the words "Je Maintiendrai" (I will overcome) - all in orange. Two flags protrude - seemingly from the lions' paws. The reverse view shows a colourful scene of celebrating children one of of whom is being carried by an Allied Armies soldier. A pennant has the words:"1945 5MEI 1955" in orange. Below the scene are the words "10e BEVRIJDINGSDAG" (10th Liberation Day) in blue.

The College’s spray was one of the first pieces of surgical memorabilia to come into the possession of the College. It had been used in the Listerian wards of the Glasgow Royal Infirmary, and was presented , along with some other artefacts, by James Hogarth Pringle in 1930. Joseph Lister (1827-1912) is known as a father of modern surgery. His methods of preventing infection were controversial in their time, but are today recognized as a major advance in the practice of surgery. Lister’s life and achievements are too well known to be recounted here. The definitive biography was written by his nephew, Sir Rickman Godlee (PRCSE 1911-13), and published in 1917. Douglas Guthrie gives an glimpse of Lister at work: “...He never wore a white gown and frequently did not even remove his coat, but simply rolled back his sleeves and turned up his coat collar to protect his starched collar from the cloud of carbolic spray in which he operated...” From advances in bacteriology, and discoveries by Robert Koch and others, it became increasingly evident that airborne bacteria were not a significant contributor to sepsis in surgical wounds. They also demonstrated that the body had its own defences against invading organisms, which were seriously compromised by the effects of the carbolic spray. Gradually the use of the spray was curtailed, Lister himself finally abandoning it in 1887. Lister performed the first antiseptic operation, the dressing and splintage of a compound fracture of the lower leg, in 1865. At this time he used carbolic solution by application, and dressings soaked in the solution. The spray was developed later, after many different methods, including carbolic and linseed oil putty, had been tried in order to reduce the harmful side-effects of undiluted carbolic acid. The steam spray was developed in 1869, and announced to the medical world in 1871. Lister’s purpose in adopting the spray was to kill airborne bacteria in the vicinity of the operation before they could reach the patient. It came to be used all over the world for many years. However, it had serious disadvantages, which even Lister acknowledged. The principal problem was the inhalation of carbolic vapour by everyone in the vicinity, including the patient and the operator. In addition, if the patient had been anæsthetized using chloroform, the gas lights decomposed the vapour into chlorine gas, making any procedure an ordeal of endurance.The spray consists of a steam boiler heated by a wick, a nozzle for the steam to escape, and a glass jar for the carbolic solution. Fuel for the wick is carried in a tank at the base. Valves regulate the pressure of the steam, and the nozzle is adjustable. The boiler is made of cast iron, the fittings are brass, and the handles are of wood. Empty, the apparatus weighs 8 lbs (3.2 kg). lister, carbolic spray, antiseptic

Farquhar McCrae (1807-50) was born at Westbrook near Edinburgh, into a distinguished Scottish family. He was educated at the University of Edinburgh and graduated MD in 1827. After a sojourn in Paris he joined the staff of the general hospital at Chatham. Here he suffered an injury during a dissection, which impaired his health for the rest of his life. He was appointed curator of the museum at Chatham, and put together a notable collection of pathological specimens. In 1838 he sought to resign on the grounds of ill health, and was then offered a posting with the 6th (Inniskilling) Dragoons. But with his health still poor, he decided to emigrate to a kinder climate, and arrived in Melbourne aboard the barque Midlothian. McCrae set up practice in Bourke Street with his brother-in-law, David Thomas. Both were pioneers in the use of anæsthetics. McCrae was the first to introduce chloroform, Thomas ether. Sometime after 1841 McCrae moved to Sydney, where he was one of the first medical practitioners appointed to the staff of the Sydney Infirmary and Dispensary. He died in Sydney at the age of 43 years. The sword is a dress sword of the 6th Dragoons. Made by Henry Wilkinson of Pall Mall, it is 38 inches (96.5cm) long and has an elaborately engraved and highly polished steel blade. Being a ceremonial weapon, the blade is quite blunt, and the gilt guard bears the crown and monogram of Queen Victoria, which dates the sword to late 1837 or 1838. The grip is bound in snakeskin and the sword is carried in a leather scabbard with brass mounts. It remains as one of the important links to the pioneering days of Melbourne, and early medical practice in Australasia.Sword, ceremonial, steel with brass decoration and a steel handle, highly decorated, in a scabbard of patterned black leather covered metal, brass tipped, 100 cm long. It belonged to Farquhar McCrae.

The Loving Cup was presented to the Royal Australasian College of Surgeons at the inaugural session of the General Scientific Meeting in Melbourne, on 15 May 1977, to mark the 50th anniversary of the foundation of the College. It was presented by Sir Rodney Smith PRCS and Lady Smith, and was a gift from the Royal College of Surgeons of England, the Royal College of Surgeons of Edinburgh, the Royal College of Physicians and Surgeons of Glasgow, and the Royal College of Surgeons in Ireland. The coat-of arms of the Colleges are engraved around the outside. The Cup was made by Roy Flewin, a master craftsman of London. It is sterling silver, hallmarked for the year of the Queen’s Silver Jubilee (1977), and stands 26cm high. It is fitted with two handles and a lid’ and has a gilt interior. The engraving was carried out by Stanley Reece. Whether between friends or lovers, drinking from a Loving Cup is an act of ultimate trust, and is always performed with due ceremony: “A” takes the Cup, filled with wine, and turns to “B”. “A” bows to “B”, and “B” bows/curtsies to “A”. “B” removes the lid of the Cup. “A” drinks from the Cup, and wipes the place he drank from with a cloth tied to one of the handles. “B” replaces the lid, and takes the Cup. If only two people are involved, then they simply reverse rôles. If there are more than two, then the ceremony continues in a similar fashion. The Cup is a token of the friendship and cordiality that exists among the Royal Colleges. In presenting it to E.S.R. (Bill) Hughes, then President of the RACS, Sir Rodney described it as ‘a symbol of our common heritage, and the privileges and responsibilities we share’The Loving Cup was presented to the Royal Australasian College of Surgeons at the inaugural session of the General Scientific Meeting in Melbourne, on 15 May 1977, to mark the 50th anniversary of the foundation of the CollegeSTERLING SILVER 2-HANDLED LOVING CUP WITH LIFT TOP, FINE BUD FILIAL, GILDED INTERIOR AND SCROLLED HANDLES, ON RIBBED PLATFORM BASE, WITH CREST, ETC. (SEE TOORAC AUCTION LIST FOR ALL DETAILS).HALLMARKS AND COATS OF ARMS. UNDER BASE: "ENGRAVED BY STANLEY REECE) PRESENTATION CARD: "LOVING CUP PRESENTED AT THE INAUGURAL CEREMONY GENERAL SCIENTIFIC MEETING, RACS, 15 MAY 1977 BY loving cup, 50th anniversary of the foundation of the college, sir rodney smith, 1977, roy flewin

During prestige, long distance train journeys some carriages had air-conditioning, and the majority of passengers had to brave unheated carriages. To offer some comfort during the winter months, the non-air-conditioned carriages were provided with footwarmers. These were metal containers roughly 100 mm thick and 300 mm wide, and about 750 mm long, which were filled with salt crystals (concentrated crystalline hydrated sodium acetate). The footwarmers were covered by sleeves of thick canvas, and two footwarmers were usually placed in each compartment of non-air-conditioned carriages. To activate the chemicals, the footwarmers were heated almost to boiling point. This was done by removing the canvas sleeves and placing the footwarmers in a large bath of very hot water. After they had been heated, they were removed from the bath and the sleeves refitted. They were then ready to be placed in the carriages. The McLaren patent foot warmer was used on railways in New South Wales, Queensland, Victoria and South Australia as well as South Africa and New Zealand. It was during the 1901 royal visit by the Duke and Duchess of Cornwall that these foot warmers were first used in New Zealand in the royal carriage. Before railway carriage heating was introduced, McLaren patent foot warmers were placed on the floor of New South Wales government railway carriages from 1891 to provide a little passenger comfort. The rectangular steel container worked a bit like a hot water bottle but instead of water contained six and a half kilograms of loosely-packed salt crystals, (concentrated crystalline hydrated sodium acetate). This was permanently sealed inside the container with a soldered cap. After the foot warmer was heated in vat of boiling water for about one and a quarter hours the crystals became a hot liquid. (The melting point for sodium acetate is 58 degrees). There was a whole infrastructure of special furnaces set up at stations for the daily heating of foot warmers. By 1914 the Victorian railways had 4,000 foot warmers in service and by 1935 there were 33 furnaces at principal stations to heat them. After about 10 hours the container was picked up by the handle and given a good vertical shake which helped the cooled liquid reform into a solid mass of hot crystals. Staff or sometimes passengers shook them en route when the foot warmers began to get cold. However, as they were heavy this was only possible by fit and agile passengers. At the end of the journey the containers were boiled again for reuse on the next trip. Sodium acetate railway foot warmers were introduced in Victoria in 1889, Adelaide to Melbourne express in 1899. "Shaking up" on this service took place at Murray Bridge and Stawell on the tip to Melbourne and at Ballarat and Serviceton on the trip to Adelaide. The use of foot warmers began to decline in New South Wales from the 1930s with the first trial of carriage air-conditioning in 1936, steam heating from 1948 ad LP gas heating from 1961. By the early 1960s the main services using foot warmers were the overnight mail trains. info from : http://www.powerhousemuseum.com/collection/database/?irn=67564#ixzz4UBNzVf6t Under Creative Commons License: Attribution Non-Commercial There was a whole infrastructure set up at stations for the daily heating of foot warmers in special furnaces. In Victoria alone in 1935 there were 33 heating works.Historic - Victorian Railways - Carriage Heater - Foot warmerA rectangular-shaped stainless steel casing with a welded seam down the back and welded ends. There is a handle at one end for carrying and shaking. Inside the foot warmer are two baffle plates and three trays to contain the sodium acetate. There was a cast-iron ball in each internal compartment. puffing billy, victorian railways, carriage haeter, foot warmer, passenger comfort, station furnace, railway ephemera, early heating methods

This 2 foot 6 inch (762mm) gauge wagon was used for carrying explosives and was used with the Greenbat Battery loco. It was donated to the Walhalla Goldfields Railway on long term loan in 2013 along with a large quantity of narrow gauge trollies and light rail from Orica’s now closed munitions factory in Melbourne’s western suburbs. Orica - Deer Park Munitions factory Orica Deer Park in Melbourne’s west has been used since circa 1875 for various forms of manufacturing and storage of chemicals. Although the site is bounded by Ballarat Road, Station Street, Tilburn Road and the Western Ring Road, the current entry point for industrial operations is situated at Gate 6 of Tilburn Road. Operations include: • a specialty chemicals facility producing products for mining services operations • quarry services • other chemical manufacture activities. The Deer Park factory complex The factory complex is of historical significance for the major role it played in Australia's manufacturing and mining industries through the development of progressively more efficient and safer explosives. It also contributed to wartime production in ammunition, initiators and the development of synthetic ammonia production and construction of the Defence Explosives Annexe No 5 (later the Albion Explosives Factory) during World War Two. The factory complex is also of technical significance for the unusual and specialised design of many of the buildings and structures, both in the layout of the works and the individual design of buildings. Blast protection and safety measures such as mounds around the buildings, 'cleanways' and buffer zones between production areas were employed extensively. A characteristic of many production buildings was the elimination of cavities where explosive compounds could lodge. The combination of concrete barriers and light-weight construction was designed to direct explosion debris away from operators or other buildings. The narrow gauge tramway, which ran through the explosives section, is a rare survivor of nineteenth century materials-handling methods. Historic - Industrial Narrow Gauge Railway - Wagon for carrying Explosives at the Orica - Deer Park Munitions factory, Deer park, Victoria, Australia Wagon for carrying explosives made from Timber and steelwagon for carrying explosives, puffing billy, industrial narrow gauge railway, orica - deer park munitions factory, explosives wagon

Used by Karl Koops (uncle of Kurt Kazenwadel) during WW1.Oval metal container with a lid which is closed with a lever type handle on a hinge. Container has a carry handle.The lid becomes a dish.karl koops, kurt kazenwadel, mess tin

From the collection of the Rev James Watkin. From the collection of the Rev James Watkin. The Rev James Watkin, 1805-1886, was a Pioneer Wesleyan missionary. He was born in Manchester, UK, in 1805. In 1830 was accepted as a candidate for the Wesleyan Ministry and married Hannah Entwistle. They sailed with a missionary party to Tonga. The work of the mission was jeopardised by prolonged and involved struggles between Christian and non-Christian Tongan chiefs. He left with his family for Sydney in September 1837. He was offered a free passage for a missionary appointed to Waikouaiti, New Zealand and arrived there in May 1840. He established the first mission station in the South Island of New Zealand. Watkin established schools at Waikouaiti and Matanaka, and stationed partly trained Maori teachers at Stewart Island and at Moeraki. He had a natural flair for languages, preached in Maori four months after his arrival, and compiled an elementary reading book to be printed in Ngai Tahu. Watkin was relieved by Charles Creed and inWatkin finished his posiion in Waikouaiti in June 1844 when he sailed for Wellington, leaving 227 church members in Otago. In 1855 Watkin settled in New South Wales, Australia, and was president of the National Methodist Conference at Adelaide in 1862. He retired in 1869 and died on 14 May 1886, at Ashfield, New South Wales. Source: https://teara.govt.nz/en/1966/watkin-jamesMid nineteenth century cylindrical woven carry bag with a lid attached and a platted handle. The bag has a brown pattern within the weaving at the top and bottom.rev james watkin, pioneer wesleyan missionary

Made by Cox, F J 1845-1882 (1891), optical & mathematical instrument maker, optician, camera manufacturer, London.Sliding box camera, about 1855. This type of camera was in use before bellows became common. The camera belonged to Hugh Strachan who passed it on to an employee, Charlie Lugg. The Strachan family is distinguished in the Geelong wool industry. James Ford Strachan, born in Scotland, established a very successful wool broking business and his sons carried on his work.Wooden case with brass handle lined with green felt containing one sliding box camera, with a brass fitting for a lense, a removable glass focussing screen, which conseals the removable lense inside the camera. Also two small wooden frames for developping the photographs. Also a linen cape and a leather pouch containing metal filters with gradients. Booklet about the life of Charles Lugg who owned the camera before it was passed to his nephew who then donated it to the NWM. Booklet details Lugg's military service, working life in Stachan's wool stores and life in Geelong and Moriac. Measurements of parts (in centimeters): 27 26 41.5 Carry Case 24.5 36.5 21.2 Sliding box Camera 15.4 .5 17.6 slide frame 11 14.5 9.5 lens 152 71 cape 9 1.5 6.5 pouch 8.5 .1 6.5 5.5 Filter Lense 8.5 .1 6.5 4.5 Filter Lense 8.5 .1 6.5 3.5 Filter Lense 8.5 .1 6.5 1.2 Filter Lense F.J. Cox/ 26/Ludgate Hill/ London (Plaque on top of box) Fred J Cox/26 Ludgate Hill/London (Engraved on side of Lens)charles lugg, fred j cox, james ford strachan