Showing 453 items
matching number plates
-
Bendigo Historical Society Inc.
Document - STRUCTURE OF BENDIGO GOLDFIELD BULLETIN NO. 47
Booklet, 36 pages, that describes the structure of the Bendigo Goldfield. Booklet is enclosed in an envelope. On front of booklet : 1923 Victoria, Department of Mines, Bulletins of the Geological Survey of Victoria, W. Baragwanath, Director. Structure of Bendigo Goldfield, by H. Herman, late Director of Geological Survey. Maps under catalogue number 3769 accompanied the booklet and are listed as 'plates' on the contents page. Plans and Sections to accompany Bulletin No 47, Structure of Bendigo Gold-Field, by H Herman, B.C.E., M.M.E., F.G.S., late Director of Geological Survey.Geological Survey of Victoriabendigo, gold mining, structure of goldfield, bendigo, goldfield, gold mining, geology -
Bendigo Historical Society Inc.
Map - GREAT EXTENDED HUSTLER'S MINE - TRANSVERSE SECTION OF THE GREAT EXTENDED HUSTLER'S MINE
Transverse Section of the Great Extended Hustler's Mine on the Hustler's Line of Reef. Bulletin No 33, Plate No XII. Shows Poppet legs at the surface and Sill of Shaft at 788.99 feet above Sea Level, Cross Cuts and their depths, stone and geographical features encountered and their references and a number of enlarged drawing of sections of the cross cuts, Geological Survey of Victoria emblem and signed by H A Whitelaw, Underground Survey Office Bendigo, September 1913. The depths of crosscuts to No 21 were taken from plans of surveys by Mr Walker and Mr Craven, noted under Reference. Another note: This Saddle Reef is sketched from Mr Walker's plan. Dividends amounting to 360,000 pounds were obtained from it. This item has not been scanned or photographed.mining, parish map, great extended hustler's mine, transverse section of the great extended hustler's mine, old shaft, mr walker, mr craven, geological survey of victoria, underground survey office bendigo, h a whitelaw -
Bendigo Historical Society Inc.
Map - GREAT EXTENDED HUSTLER'S MINE - PLAN OF THE GREAT EXTENDED HUSTLER'S MINE
Plan of the Great Extended Hustler's Mine on the Hustler's Line of Reefs, Bendigo. Bulletin No 33, Plate No X. Lease No 7382. Plan has map of streets. Mine was located in the block bounded by Langston and Anderson Streets and was between the Hustler's Anticline at Surface and the Lightning Hill Anticline at Surface. Latham & Watson's Shaft is also mentioned. Levels are numbered and a table shows the Levels and their Depths. Geological Survey of Victoria. Signed by H A Whitelaw, Underground Suyrvey Office, Bendigo, September 1913. This item has not been scanned or photographed.mining, parish map, great extended hustler's mine, hustler's line of reefs, mining lease no 7382, geological survey of victoria, underground survey office bendigo, h a whitelaw, latham & watson's shaft -
Bendigo Historical Society Inc.
Map - FORTUNA HUSTLER'S MINE - PLAN OF FORTUNA HUSTLER'S MINE
Map and plan of the Fortuna Hustler's Mine on the Hustler's Line of Reefs. Bulletin No 33, Plate No 1. Plan gives depth of the different levels. Bendigo Railway Station is on the map and also a number of the streets. Carpenter Street is called Cemetery Road. Also on the Hustler's Line of Reef is the Summer Hill Shaft. Shown is the Hustler's Royal Reserve No 2 Lease. Map has the Geological Survey of Victoria crest. It is signed by H Whit ?an Underground Survey Office Bendigo, September 1913. This item has not been scanned or photographed.map, fortuna hustler's mine, plan of fortuna hustler's mine, hustler's royal reserve no 2 lease, summer hill shaft, hustler's line of reef -
Bendigo Historical Society Inc.
Map - COMET MINE - TRANSVERSE SECTION COMET MINE
Transverse section of the Comet Mine on the Hustler's Line of Reef Bulletin No 33, Plate No XXV signed by H. A. Whitdon, Underground Survey Office Bendigo September,1913. Map shows depth of the different levels, the type of stone and shaft about 2020 deep. A number of smaller drawings on the side.Reference explaining ther different types of stone, etc. This item has not been scanned or photographed.Geological Survey of Victoriamining, parish map, hustler's line of reefs, transverse section of comet mine bulletin no 33 plate no xxv, lightning hill line of reef -
Bendigo Historical Society Inc.
Book - DRAWING BOOK: PHOEBE LANSELL, 1880
'Drawing Book' - attached plate stating 'Student's Name' : Phoebe Lansell.; 'School Number': 161 Other ??. Pinky - fawn coloured cover - string- bound with cardboard pages and separating tissue paper .The front cover has a landscape scene sketch .An angel and cherub are holding back a curtain .A label shows School number 161 .The back cover shows a sketch of 'New Princes Bridge .Melbourne ' and St Patricks Cathedral-Post 1880's 90's .Inside are pencil sketchesperson, individual, phoebe lansell -
Bendigo Historical Society Inc.
Machine - BABY DAISY: HAND OPERATED BELLOWS VACUUM CLEANE
Hand operated Bellows vacuum cleaner. Previously #27 The “Baby Daisy” Vacuum Cleaner is constructed from timber, steel and leather bellows. It has a carry handle fixed to the top. The base is approx. 500mm x 250mm. The height is approx 400mm. On one side is a bracket for a handle (missing) used to operate the bellows. The device is mounted on a foot plate that is split. On one side of the bellows is a circular metal detachable hatch, fixed by wing-nuts. This has a central hole for a tube (missing). Attached internally to this hatch is a cloth dust collection bag. The metal hatch has the following moulded words arranged in a circular fashion. 'DAISY Vacuum Cleaner). There are two brass plates fixed to the side of the cleaner above the hatch. These plates are stamped with 'Rd. No. 518080 and Rd. No. 530353' Gold printed Labels on the side say the following. BABY DAISER Vacuum Cleaner. Registered England. No. 518080/7 No. 530353/08 Trade Mark No.294851 /07 Designs France No. 25469/08 Germany No. 330219 / 08 Further Patents applied for. In the centre of the label is a picture of a Daisy Flower. With the words Iles Patent. This is surrounded by a ribbon with the words. 'The Daisy Registered Trade Mark'. On one side near the base of the cleaner the number '7749' is stamped into the metal.fBaby Daisydomestic equipment, cleaning, vacuum cleaner -
Bendigo Historical Society Inc.
Accessory - SILVER PLATED CLOTHES BRUSH
Silver plated clothes brush. Silver is impressed with floral design. Previous (catalog?) number of silver edge - U 4701).domestic equipment, cleaning, brush -
Bendigo Historical Society Inc.
Container - ROLLS RAZOR
A Rolls Razor in box with instructions on bottom, nickel plated case with key hole pattern containing razor and inbuilt strop. Cardboard box in red, green & black labelled Imperial number 2 Rolls Razor nickel plated.Rolls Razor made in England patented in England and abroad English patent numbers 457383 284428 242718 242717 and pending Rolls Razor Pat no's 224578 242718personal effects, shaving -
National Vietnam Veterans Museum (NVVM)
Equipment - Mine detecting set
Green detecting set - Comprising of : Metal Case.Square detecting plate / Coil / loop; Detector wand battery pack and insert, detector unit earphones,spare amplifiers. Tin w/spare ear pins.Battery pack no Batteries Detector unit cover, probe assembly.Lithium button cells - removed.Detecting Set mine, model P 158. Serial Number 9686, Purchase order CB / 94236,MFR Name Polan Industries inc.FSN 6665 - 966-9071. Insert top /FSN 6665-991-0012 /Detecting set mine /Group 1 /size 15 /MFG Part NO COO- 0309 US property 6665-00-966-9871 Red caution sign on bottom.detecting set. -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Model, anatomical, Auzou's papier mache models of stages of a developing fetus in utero, c1926
The development of a fetus in utero is represented in eight stages. The papier mache is painted in great detail and finely lacquered and coloured plated cord represents the umbillical cord. Each model has an internal and external view; a lid to the uterus can be lifted off. allowing an interior view. Parts on the models are numbered in black ink and correspond to a booklet that accompanies the models.Black ink numberinfg -
Australian Gliding Museum
Machine - Glider – Sailplane, 1963
This aircraft is one of 9 single seat ES 59 advanced club sailplanes manufactured by Edmund Schneider Pty Ltd in the 1960s. It was first flown in August 1963 and delivered to the Darling Downs Soaring Club at Toowoomba Queensland. At that Club it had 2603 flights and recorded a total airtime of 1475 hours. In addition to many local circuits and soaring and cross country flying, it was used at gliding competitions, including Nationals at Benalla in December 1964, State Championships at Oakey in April 1965, at Warwick in April 1966, and at (Inverell?) in March 1967. On at least 15 occasions flight times in excess of 5 hours duration were achieved. On 5 October 1970, the glider had a new life when it was relocated to Wollongong in New South Wales. It recorded 1927 flights with a total airtime of 1179 hours at the club between October 1970 and June 1988. Competition appearances included the State Championships held at Forbes in January 1972. Places away from Wollongong where the glider was launched include Cootamundra, Wagga, Temora, Marulon, Narromine, Leeton, Nowra, Goulburn, Horsham, Greenthorpe. On 15 June 1988 it was transferred to Ron Geake who transported it to Warrego in Northern Territory (flown once at Alice Springs), and then to Gympie in Queensland where it was flown about 20 times by the end of 1995. It was also flown on a small number of occasions at Forbes in New South Wales in 1996 and 1997. During 1998 and 1999 the glider was sparsely used (9 flights) at locations that have not been recorded. From May 1999 until transfer to the Australian Gliding Museum in May 2011 it apparently was not flown. Aggregate airtime hours for the glider stand at 2702 hours 53 minutes. It has been launched 4569 times. A good example of a Schneider ES59 sailplane from the 1960s. This type is of note because it was the first Australian designed and built sailplane to be used in a world gliding competition (Jack Iggulden in Argentina in 1963). This Schneider ES59 Arrow is a single seat wooden sailplane with one piece wing. The instruments are not present except for altimeter. Fin and rudder are of swept back design. Colour scheme is white with lemon yellow fuselage underbelly. The aircraft came to the museum on an open trailer that had been designed to carry the one piece wing. Plate in cockpit with details of manufacturer states; manufactured by E. Schneider Ltd, Adelaide SA; Type ES 59; Serial Number 62; Date August 1963.australian gliding, glider, sailplane, schneider, es59, arrow, darling downs soaring club, wollongong gliding club, ron geake -
Australian Gliding Museum
Machine - Glider – Sailplane, 1962
This ES Ka6 sailplane (VH-GRW, serial number 55) was built under licence from Alexander Schleicher in 1962 by Edmund Schneider Limited. It was one of 12 Ka6s, with minor variations from the Schleicher product, built by Schneiders in Australia. It was test flown at Parafield Aerodrome, Adelaide, on 8th September 1962. By way of background, the Schleicher KA 6 series of sailplanes were designed by Rudolf Kaiser in Germany. They were quite successful in the Standard Class in the late 1950s and 1960s. Over 1400 were produced. The first owner of VH-GRW was the Victorian Motorless Flight Group which, at the time, was based at Berwick Airfield on the outskirts of Melbourne. On 22 April 1972, the ownership passed to a syndicate of members from the VMFG. It again changed ownership in July 1974. The new owners were another syndicate based at Campbelltown in New South Wales. The glider went to a Tasmania syndicate in June 1976 and finally to the Soaring Club of Tasmania. In total VH-GRW recorded 3369 hours air time from 4952 launches. It was used very little after 1996. This exhibit is an example of the Scheicher Ka6 sailplane type that were built by Edmund Schneider in Australia.Plywood, spruce and fabric covered high wing single seat sailplane. The airframe has been restored to the point of repainting. Currently the fuselage, rudder and the wings aft of the main spar are coated with pink dope. The tailplane retains the white gloss finish of the glider prior to the restoration work. The cockpit to be refitted (with instruments etc). Serial number 55. The manufacture details are displayed on a metal plate fixed to the main bulkhead. australian gliding, glider, sailplane, schneider, schleicher, ka6, rhonsegler, victorian motorless flight group, soaring club of tasmania -
Australian Gliding Museum
Machine - Glider – Sailplane, 1959
This aircraft was designed by Edmund Schneider as a single seat medium performance sailplane. Originally designated as the Grunau 3b but later named the Grunau 4. However, it was a new design with fully enclosed cockpit. The main point of difference to earlier Schneider Grunau designs was the tapered wings with the Gottingen 549 aerofoil. This design feature gave the Grunau 4 a better speed range compared to the Grunau Baby 2b or the Grunau 3. The prototype flew on 6 December 1953 and it went to the Waikerie Gliding Club. A second was delivered to the Dubbo Gliding Club in October of the next year and a third (the Australian Gliding Museum’s exhibit) built for the Adelaide Soaring Club in 1959 (registered as VH-GLX on 21 October 1959). Another was built by Josef Brabec from a Schneider supplied kit from 1954 to 1956. The log book indicates that the glider recorded 2362 flying hours over approximately 40 years of active service. There are many long flights recorded. The registration was cancelled on 30 July 2014 as a result of a decision by the Museum to withdraw the glider from service. The exhibit represents the final development of the "Grunau" single seat type by Edmund Schneider Ltd in Australia. Viewed together with the Grunau Baby gliders in the ATO Collection (Two Grunau Baby 2, and a Grunau Baby 3A), the changes to this glider type over a 30 year period can be recognized. Single seat wooden sailplane with fabric covering. Fully enclosed cockpit. The aircraft is white with Linden Green on the wing tips, tailplane and underside of the fuselage and also on the central wing cover. Identification Plate in cockpit showing that glider is serial number 37 built by Edmund Schneider Ltd in 1959 australian gliding, glider, sailplane, grunau, grunau 3a, grunau 3b, grunau 4, schneider, waikerie gliding club, dubbo gliding club, adelaide soaring club, josef brabec -
Churchill Island Heritage Farm
Photograph - Photograph of Souvenir Plate
Churchill Island Heritage Farm has a large photographic collection dating from the nineteenth century. This series shows more contemporary photographs taken from around Churchill Island.Photograph of a souvenir plate with a monochromatic painted scene of Lieutenant Grant on the Lady Nelson naming Portland Bay. catalogue number written on reverse in pencilphotograph, churchill island, grant, lady nelson, souvenir -
Bendigo Historical Society Inc.
Postcard - GLADYS DEAN COLLECTION: POSTCARD, 1906 - 1908
Photo mounted on backing card with clear protective film over image and card. Black and white image is of a man and woman photographed from the chest up, standing together. They are dressed formally, the man in a pale coloured suit with waistcoat and the woman in a pale coloured shirt with button detail. Both are wearing ties and she is wearing a dark coloured brimmed hat. The number P386E is printed in white in the lower left hand corner of the image. There is a white border varying between .2mm to .5mm around the photograph. The words Zena Dare & Brother are printed in sepia along the lower left hand edge of the backing card. The words Christmas Greetings have been written in silver on the right hand lower edge of the backing card. On reverse card is addressed to Miss Gladys Esmond McKenzie St Golden Square with a one penny stamp affixed post marked Melbourne.Rotary Photographic Plate Sunk Gem Series Rotary Photo EC. P 386Epostcard -
NMIT (Northern Melbourne Institute of TAFE)
Trophy: Collingwood Technical School 1933, Boomerang Plate, Silver trophy from Victorian Technical Schools Sports Union 1933
Silver cup trophy from the Victorian Amateur Boxing & Wrestling Association for the Annual Boxing Championships won by Collingwood Technical School in 1933. Also won by Collingwood in 1934, 1939, 1942, 1943, 1944, 1945, 1946, 1947. METROPOLITAN DISTRICT / of the / Victorian Technical Schools Sports Union / CHAMPIONSHIP CUP / for the school winning the greatest number of events / at the / ANNUAL BOXING CHAMPIONSHIPS / Presented by the Victorian Amateur Boxing & Wrestling Assn / 1933’ On back is a list of winners from 1933 to 1950 includes Brighton, Prahran, South Melbourne, Essendon, Oakleigh, Brunswick. collingwood technical school, trophies, boxing championship trophy 1933, students, nmit, -
Bendigo Historical Society Inc.
Photograph - SANDHURST SAVINGS BANK/WESLEYAN CHURCH SANDHURST/ CONGREGATIONAL CHURCH SANDHURST, c. 1888
Black and White Photos taken from 'Sandhurst Illustrated by Schult, There are 3 smaller Photographs contained on the plate, 'Sandhurst Savings Bank', 'Wesleyan Church, Sandhurst', 'Congregational Church, Sandhurst'. Left of the bank is a woman dressed in black top and light coloured dress, Two men stand in front, one with a walking cane and hat other long coat and hat. 2 small trees with wooden guards. Wesleyan Church there are a number of adults and childrenon the footp0ath and roadway, horsedrawn carriage with driver in dark clothing and two passengers in light coloured clothing. Congregational Church has a tall spire topped with a cross and smaller replica at front left. four adults and one child all in dark clothing on footpath. White picket fencewith dark coloured gate.organization, church, bendigo churches, bendigo churches, bendigo bank, sandhurst churches, sandhurst bank, churches, banks -
Bendigo Historical Society Inc.
Photograph - NUMBER 22 TRAM-QUARRY HILL
Black and White Photograph of Tram being maintained at the workshop depot. The tram has the Number 22 painted on its fascade and 'Quarry Hill' in the designation plate. On rear of photo is written in pencil number 86. Rope hanging across the front left side is used to connect the roller pole to the electricity supply.photograph, tram, no 22, bendigo trams, bendigo tramways, bendigo tramways co.ltd, tram 22, quarry hill -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Needle holder used by Dr Fritz Duras and Dr Michael Kloss
This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College.Metal needle holder. The needle holder's overall shape is that of a teardrop, with a rounded handle section narrowing to serrated grip points at one end. The needle holder appears to be made of a plated metal. There is a clasp at one end for locking the needle holder into place. A rounded tab on the inner aspect of the instrument is engraved with the number '50'. The word 'Kloss' is engraved on one side of the instrument, towards the points.'50' 'Kloss'obstetrics -
Geoffrey Kaye Museum of Anaesthetic History
Chevalier Jackson's laryngoscope, circa. 1901
Chevalier Jackson was a surgeon who designed this laryngoscope. Jackson contributed a number of important innovations to direct laryngoscopy, while developing a unique mastery of the technique. Ultimately, he combined this endoscopic proficiency with open surgical techniques.The U-shaped laryngoscope comprises a moulded handle and a long endotracheal insert which has a small connector to allow for a light to illuminate the patient's throat. The item is chrome-plated.Engraved on connecting shaft: Jackson's Laryngoscope, 1901.laryngoscope, chevalier jackson, endoscope, anesthesia, distal illumination, chrome, 1901, jackson's -
Geoffrey Kaye Museum of Anaesthetic History
Oxford vaporiser
This vaporiser is enclosed in a portable black cylindrical bakelite carry case with moulded handle, woven fabric strap and single steel latch. The item comprises a three-chambered vaporiser, an assortment of attachments including black ribbed rubber tubing, light brown rubber rebreather bag, facemask, black rubber mask harness, Connell pharyngeal airway with connector, an attachment for an endotracheal or nasal tube, as well as spare thermometer and other parts.Stencilled in white paint on the outside top lid is 'THIS SIDE UP / WITH CARE / SEE INSTRUCTIONS / INSIDE LID'. Serial number is inscribed on metal plate inside the lid and printed in white on the inside lid is 'IMPORTANT / The Oxford Vaporiser is a scientific apparatus'vaporiser, oxford, anaesthetic, portable, bakelite, connell pharyngeal airway, heated vapor, endotracheal, nasal, rebreather bag, thermometer, facemask -
Geoffrey Kaye Museum of Anaesthetic History
Set, Tongue Depressor
General anaesthesia relaxes muscles around the airway which can result in the airway becoming obstructed. Holding the jaw open or keeping the tongue out of the way were crucial. Often, brutal devices were used to open the jaw or pull the tongue forward to clear the airway.Set of four chrome plated metal tongue depressors of different sizes. Each depressor has been engraved with a number (1 - 4). Numbers 2 - 4 also have a metal tube that could be used to administer anaesthesia simultaneously. Numbers 2 - 3 also have cross-hatched grooves in the depressor and all have finger grips engraved into the handles.boyle-davis, airway management -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Syringe kit (empty), Chas F Thackray Ltd
Steel box holding syringe parts. There are four hollow metal rods resting in metal clasps attached to a baseboard inside the tin. Some of the rods appear to have metal wire threaded through (purpose unknown). There are a number of clasps attached to the baseboard and top-plate which indicate syringes would have been housed there.Maker's mark stamped into tin: THACKRAY / LEEDS -
B-24 Liberator Memorial Restoration Australia Inc
Aviation Compass, Aircraft Compass
... Number 80873.D Brass Plate - King's Crown over RAAF No. G6A... in Tiger Moth and Spitfire aircraft. aviation compass a6 Number ...Used on RAAF aircraft in WWIIUsed by RAAF for navigation training primarily in Tiger Moth and Spitfire aircraft.Navigation Compass Type P8. Number 80873.D Brass Plate - King's Crown over RAAF No. G6A/726aviation compass, a6 -
Royal Australasian College of Surgeons Museum and Archives
Trumble's Skull Plough
Long term loan from Neurological Society of Australasia Museum of Neurosurgical Instruments,South Australia. Catalogue with Historical Commentaries Second Edition January 2006 Copy located at RACS MuseumTrumble's Skull Plough or craniotome devised by Hugh Trumble (1864-1962 ) CRANIOTOME. This craniotome was designed by Hugh Trumble (1894-1962) of the Alfred Hospital, Melbourne, one of the eight founders of the Neurosurgical Society of Australasia. It was a modification of an earlier instrument, similar in principle but less versatile, designed by Sir Henry Souttar(l875 - 1964), a very inventive surgeon who worked in the London Hospital. Souttar also used a motor-powered circular saw when necessary. He cut very large circular bone flaps, exposing the occipital lobes and posterior fossa in a few minutes. Trumble reported the use of this craniotome as "an expeditious method of cutting bone flaps" and in the designer's hands this claim was certainly justified. To use the crauiotome, it was necessary to hold the skull rigidly, and this was done by embedding the head in a plaster mould. Three holes were drilled in the skull to fix the pin of the craniotome, and the flap was then cut in a series of three arcs, after which the flap was elevated with levers until its base fractured. The 'Trumbolian" instrumentation was used in the Alfred Hospital by a number of Trumble's pupils. The craniotome is made of steel, not plated and apparently not stainless. It is believed that Trumble made his craniotomes himself, in a backyard workshop. -
Puffing Billy Railway
Blackstone Oil Engine, 6 November 1908
8HP Blackstone Lamps Start Oil Engine engine number 71076 Engine Details Maximum operating RPM of 240. Fitted with a 3'9" Flywheel Tested on the 6th of November 1908. Shipped to Cluter buck South Australia for installation on concrete base. Recovered and restored during the 80's in South Australia Purchased privately in 2013 in Tailem Bend South Australia and transported to Victoria. Currently on loan to the Puffing Billy Museum at Menzies Creek as an operating exhibit. Blackstone & Co. was a farm implement maker at Stamford, Lincolnshire, United Kingdom. In 1896 they built lamp start oil engines. The Lamp or hot-bulb engine (also hotbulb or heavy-oil engine) is a type of internal combustion engine. It is an engine in which fuel is ignited by being brought into contact with a red-hot metal surface inside a bulb, followed by the introduction of air (oxygen) compressed into the hot-bulb chamber by the rising piston. There is some ignition when the fuel is introduced, but it quickly uses up the available oxygen in the bulb. Vigorous ignition takes place only when sufficient oxygen is supplied to the hot-bulb chamber on the compression stroke of the engine. Most hot-bulb engines were produced as one-cylinder, low-speed two-stroke crankcase scavenged units Historic - Industrial - single cylinder, horizontal, 4 stroke, hot-bulb ignition oil engine Blackstone 8HP Oil Engine made from steel, wrought iron and brassOval Plate with Black Stones and Clutter Buck Brass Plaque engine number 71076blackstone, oil engine, clutter buck, black stone, puffing billy, hit and miss, engine, blackstone & co -
Puffing Billy Railway
engine plates ABT rack engine Number 5
... engine plates ABT rack engine Number 5...Brass Plate racking engine ABT number 5... wks.Glasgow Brass Plate racking engine ABT number 5 engine plates ABT ...Brass Plate racking engine ABT number 5N.B Loco .Co.Ltd hyde Park wks.Glasgow -
Tatura Irrigation & Wartime Camps Museum
Memorabilia - Commerative Plate / Pope Plate, 1986
Papal visit to Australia in 1986Round, heavy metal plate, with 3cm raised rim, a gold Papal coat of arms is in the centre. 'On the Occasion of the Papal Tour of Australia by His Holiness' inscribed around the outside edge. 'John Paul 11, 1986' is inscribed above and below the coat of arms. Inscribed on the bottom are 6 symbols, and the number 090 is under those symbolspapal visit, souveniers, pope john paul 11 -
Tatura Irrigation & Wartime Camps Museum
Memorabilia - War Plate /Anniversary Plate, 1985
40th Anniversary Plate for Victory in the Pacific 15th August 1945Round, heavy metal plate, with 3cm raised rim, medal in centre 40th Anniversary of Pacific Victory, 15th August 1945Around the edge ' When you go home, Tell them of us, and say, For Your tomorrow We gave our Today. Around the bottom rim ' are two crossed poppies inside a laurel wreath. In the bowl of the plate ' THE PACIFIC ', 'SOUTH EAST ASIA' Are 3 lists of all the areas in the Pacific that saw conflict during WW11. On the bottom are 4 symbols engraved plus the number 1033. Perhaps a limited editioncollectors plate, ww11 in the pacific, lists of areas involved in the pacific war effort