Showing 8866 items
matching handling
-
Flagstaff Hill Maritime Museum and Village
Dental surgical instrument, mid 19th century
This tooth extractor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Tooth extractor, metal. "LOWER INCISORS & CANINES" stamped inside the handle. "SKIDMORE / SHEFFIELD" stamped around the hinge, and "r" in centre of hinge. Once part of Dr T.F. Ryan's medical practice. (W.R. Angus Collection)"LOWER INCISORS & CANINES" stamped inside the handle. "SKIDMORE / SHEFFIELD" stamped around the hinge, and "r" in centre of hinge. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, skidmore, sheffield, dr t.f. ryan, dr w.r. angus, dental surgery, tooth extractor, surgical instrument, nhill base hospital, flying doctor, medical history, medical treatment, mira hospital -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Lynah, Circa 1915
Lynah's Ovoid Laryngeal Speculum with the light bulb and part of the connection wires still attached. Its semi square shape is characteristic of this kind of instrument, also has an screwable pointed end attachment. It has dusty and grey spots inside the canal of the blade near the light bulb canal. Solder spots are visible at the top of the blade as attachment of the laryngeal speculum blade base. General discolouration over the surface of this piece and hit marks present at the base of the handle. It was roughly engraved over the handle the owner’s details and year. Stamped at the base of the handle are the manufacturer’s details partially visible. Engraved at the handle, U N N A M E T . A D E L A I D E . c. 194[6] . Stamped at the base of the handle, [first line worn away might be MADE BY] / E / A D / [might be an S] YDN [might be an EY] / CHROME PLAT [incomplete word due stamp near the edge]laryngeal speculum, laryngeal instruments, unnamet, adelaide, lynah, henry lowndes -
Bacchus Marsh & District Historical Society
Tool, Pocket Knife
This pocket knife is believed to have been used by an employee of the Bacchus family and possibly given to the employee by the Bacchus family. It is therefore an object with a probable linkage to one of the earliest European colonist families in the Bacchus Marsh area.A pocket knife with mother of pearl handle and a silver blade.On the handle on one side there is an engraved decorative design featuring a bird, leaves and flowers. Along the middle of the handle there is a blank cartouche of silver, intended for the name of the owner. On the other side there are two engraved starbursts. On the blade there are five hallmarks, a crown, a lion passant, head of Queen Victoria, letter G and the letters JM. The crown represents Sheffield. The lion passant indicates the knife was made in England, the image of Queen Victoria is a Duty Mark, the letter G indicates that the year of manufacture was 1850. JM indicates one of two manufacturers - JM or Mappin & Son.knives, bacchus family -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Furniture - Table, small hardwood, circa1850
A small, hard-wood table with decorative spindles, three drawers, and turned legs is from the original pioneer cottage built on land that was part of the Dendy's Special Survey 1841 . Now 302 Jasper Road Ormond. The table is in fair condition, but not complete. It is thought that the original drawer handles most likely deteriorated or were broken over the years. An unknown person replaced the original handles with modern glass knobs, in the late 1970’s. This table was in the original pioneer cottage which is now Reconstructed Box Cottage Museum. An unknown pioneer built the Cottage circa 1850 and it was purchased by William Box in 1865. William and Elizabeth Box lived in the Cottage until 1914 when it was sold to August Reitman who resided there until 1950. In 1964 the Cottage was moved to the present site , Joyce Park, adjacent to 302 Jasper Road Ormond A small, hard-wood table with decorative spindles, three drawers, and turned legs is from the original pioneer cottage built on land that was part of the 1841 Dendy's Special Survey The table is in fair condition, but not complete. It is thought that the original drawer handles most likely deteriorated or were broken over the years. An unknown person replaced the original handles with modern glass knobs, in the late 1970’s. moorabbin, table, ormond, bentleigh, pioneer, dendy henry, box william, market gardener, reitman august, dendy special survey -
Geelong RSL Sub Branch
Mess Tins, 1939
This mess tin has been issued to VX 26729 Thomas J Patullo who served with the AIF Field Survey Unit, RAE, during WW2.This mess tin is the original that was issued to VX26729 Thomas J Patullo during his service in WW2.Two Silver Colour, metal, oblong shaped mess tins with handles. One tins is smaller and fits inside the other when not in use.On the back of the small tin - VX26729 T J Patullo. On the back of both tins where the handle is attached to the body - L A Co 1939 and the Defence Logo.mess tins, ww2 -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, A. Charles King Ltd, 1930
Magill laryngoscope with a battery in the handle was one of first of its kind This piece of equipment is made of stainless steel and has a canal on its left side and a handle to put batteries inside of it and it has attached a round screw to make it extendable. This object also has an stamped inscription and on the other side it has the manufacturer details. Stamped A.CHARLES KING.LTD Stamped REG.NO.749019 Stamped STAINLESSmagill, ivan, battery -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, MacIntosh
Curved laryngoscope blade and handle. The laryngoscope blade is identified as a MAC 3 RIESTER blade and is attached to the textured handle with a serrated grip for ease of use. The handle is also a battery deposit which has stamped on the lid base the manufacturer's name and the place where it was made.Stamped on the lid base of the handle, Penlon R [trademark] / Made in U K Printed on the blade base, MAC 3 RIESTER Printed on the blade base, STAINLESS STEEL C E / GERMANY Stamped on the blade base, TDD Stamped on the blade base, Gairway, laryngoscope, penlon, united kindom, germany, mac 3 reister, blade, the alfred hospital, melbourne, macintosh -
Bendigo Historical Society Inc.
Domestic object - Demijohn
The word Demijohn is believed to be from the French "dame-jeanne" meaning Lady Jane. It originally referred to a glass or pottery container for fluids that has a wide body, a narrow neck and a small handle afixed at the neck. It was usually encased in a wicker basket and may also have been used for direct brewing.Demijohn. Cork in opening. No markings or writing. Handle Light brown top and cream base No markings or writing demijohn, pottery -
Clunes Museum
Leisure object - SLAZENGER TENNIS RACKET
.1 WOODEN TENNIS RACKET * BALCK WRAP GRIP WITH SLAZENGER LOGO ON BASE OF HANDLE, CREAM COLOURED HANDLE WITH RED ACCENT BOTH SIDES .2 BLACK SLAZENGER VINYLK COVER WITH ZIP .1 ON HANDLE - USED AND RECOMMENDED BY THE WINNERS OF THE WORLD MAJOR 4 TITLES, SLAZENGER SMOOTH, CHALLENGE JOHN NEWCOMBE - KEN ROSEWALL - MARGRET COURT .2 SLAZENGER IN WHITE WRITING WITH SLAZENGER LOGO IN WHITE VINYL ON BOTH SIDESslazenger tennis racket, slazenger -
Churchill Island Heritage Farm
Functional object - Paling/shingle cutting blade
The cutting blade was used to cleave timber apart into shingles or palings. A haft (handle) would have been attached through the socket giving the tool an L shape. The base of the blade is driven into the timber with a mallet forcing timber into two parts along the grain. Twisting the haft then levers apart the two pieces. This can be repeated until several long strips of timber have been cut from a log. Also called a frow or froe. This tool allowed more accurate and controlled splitting over an ordinary axe and required less force.well used blacksmith made. No handlepaling, shingle, cutting, blade, tool, tools, churchill island, farm -
Wangaratta RSL Sub Branch
Memorabilia - Trench Art Letter Opener, Unknown
Trench art letter opener cut into the shape of a scimitar from a section of a shell case. The handle for the letter opener is made from a discharged British or Australian MK VII .303 calibre rimmed cartridge. The blade of the letter opener is attached to the handle via a bullet which has been sliced through the middle HMAS Uralba was an auxiliary minefield tender and armament stores carrier operated by the Royal Australian Navy (RAN) during World War II. She was launched in 1942 by Ernest Wright, Tuncurry, New South Wales as Uralba for the North Coast Steam Navigation Company. Requisitioned by the RAN while under construction on 13 July 1942 and commissioned on 22 November 1942. After being returned to her owners and being sold and used for a number of purposes she was sunk on 4 November 1971 to create an artificial reef off Carrum Creek, in Port Phillip Bay.Stainless steel blade with handle made from 303 round/cartridgeHMAS Uralba inscribed on bladehmas uralba, ran, ww2, letter opener, paper knife -
Warrnambool Art Gallery
Knobkerrie, Early 19th century
Knobkerrie are clubs used as weapons mainly in South and East Africa. The club end can be used to throw at an animal or to club an enemy's head in. Usually these would be carved from a protruding tree branch. The name is Afrikaans and comes from 'Knop', meaning knot or ball and 'Kierie', meaning cane.Accessioned into the museum collection in 1913 and donated by a Mrs Newcome, there is not much other information on its provenance. However, the museum collection holds several artefacts from this region of South Africa and much of it was collected during the Boer Wars of 1880-1881 and 1899-1902.A wooden club type object. It has a narrow cylindrical handle with a large wooden sphere at the top. The wood is shiny and smooth with a polished effect. The handle is 31.5cm long with a 2cm diameter and the head or knob has a height of 9.5cm and a circumference of 27cm.This would have been hand carved from a protruding tree branch. Towards the end of the handle is a 13.9cm section of zig-zag patterning. Further down towards the 'knob' there looks to be carved into the wood 'Jud'.knobkerrie, boer war, zulu, south africa, ethnography, weapon -
Kiewa Valley Historical Society
Mould Butter, unknown, post 1967
This butter mould/pat may have been manufactured post 1967(year post codes appeared in Australia) however the post code was only stamped on after it was machined. This type of butter mould was used by rural families to fashion home/farm made butter. This period was in most rural regions a time of self sufficiency where any domestic type implement which could be fashioned by the family would be crafted with skill. Shopping for goods required catalogues from stores located in major rural towns and cities and involved lengthy waiting times. Travelling to and from these specialised stores was not pleasant due to the relatively poor quality of the roads and the lengthy times taken. The small general stores in the Kiewa Valley could not cater for all the needs of the valley. The 1960's was a time when facilities especially goods and services started to improve drastically. The S.E.C. of Victoria with its Kiewa Hydro Electricity Scheme provided not only an improvement of facilities in the valley but also a increase in the population. This increase resulted in a greater demand for local produce. This item is one of many domestic food processing implements used by Kiewa Valley households in the mid 1900s, whether on the farm or in the small towns and hamlets. Self sufficiency was the key to survival during these early times. Where ever possible supplies from within the valley were preferred to that brought in by travelling salesmen or traders. This butter mould and butter pat was commonly used to fashion "home" made butter throughout the valley and in some cases supplied to "outside" regional towns. Although this method of production was phased out by better access to goods from nearby cities the revival of the good organic home grown produce in the 1980s saw a greater demand of this type of farm based produce.This well crafted circular wooden butter mould could also be used as a butter pat.The handle in the middle of the mould was not added after the crafting but has been fashioned from the initial block of wood when the bowl was crafted. The bowl structure has a rim around the edge.The top of the handle has an ink stamp "T. & W. Dav" on the top line and "Tawonga 3697" underneath.domestic food preparation, wooden butter pat, butter mould circular, dairy industry -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tools, steel hacksaw with wooden handle, c1900
A hacksaw is a fine-toothed saw, originally and principally for cutting metal. They can also cut various other materials, such as plastic and wood; for example, plumbers and electricians often cut plastic pipe and plastic conduit with them. On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. In normal use, cutting vertically downwards with work held in a bench vice, hacksaw blades should be set to be facing forwards. A steel hacksaw with a wooden handle but without blade -
Stawell Historical Society Inc
Realia, Slipper Bed Pan
Made of English Ironstone. For bedridden PeopleWhite ceramic English Ironstone. Slipper shaped Bed Pan. handle on backThe New Slipper Bed Pan. Theis Slipper should be passed under the patient in front between the legs. If a flannel cap is made for the blade, fastened by strings under the handle, considerable comfort will be afforded. Best English Ironstonemedical, hospital -
Flagstaff Hill Maritime Museum and Village
Tool - Scythe, 1930-1960
A Scythe was one of the most important of all agricultural hand tools, consisting of a curved blade fitted at an angle to a long, curved handle and used for cutting grain. In modern scythes the handle has a projecting peg that is grasped by one hand, facilitating control of the swinging motion by which grass and grain are cut. The exact origin of the scythe is unknown, but it was little used in the ancient world. It came into wide use only with agricultural developments of the Carolingian era (8th century AD) in Europe, when the harvesting and storing of hay became important to support livestock through winters. Scythes can still be found in use today by hobby farmers and permaculturists. ( producing food, by using ways that do not deplete the earth's natural resources) to cut grass in a more eco-friendly way as opposed to using a machine.A hand tool used for the cutting of crops and grain, modern versions are still being produced today in Europe. The subject item gives us a snapshot into agricultural practices in times past.Scythe with long wood Snath (curved handle) with 1 hand holding piece & curved blade. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Domestic object - Fire Tongs
Fireplace tongs were used to add wood to the fireplace as well as break down the crackling wood to add more oxygen to growing flames. Of the four tools that were usually found in an upright fireplace set, tongs had the biggest design variation. Some tongs looked like medical calipers that were rounded at the bottom, while others were almost like metronomes with their rectangular shapes. https://www.lovetoknow.com/home/antiques-collectibles/vintage-antique-fireplace-tools Tongs are tools used to handle items, and generally move the item from one place to another, or turn things, like a piece of meat on a barbecue. Tongs usually have flat ends to pick up items without damaging them and to grip onto the items easily, however, some tongs have claws or toothed ends to grab more bulky and slippery items. Tongs are used mainly for handling food or hot items. Modern tongs are usually made from plastic, metal, stainless steel, or other material, depending on their purpose. Originally, tongs were probably wood sticks that eventually became metal sticks around 3000 BC to handle hot items in a fire Tongs are used to extend the hand or as a replacement handler for potentially dangerous items. Tongs usually have a sprung end so that the operator is required to squeeze the middle of the tongs to grab hold of an item, or they have a pivot which requires the user to squeeze the handles at the end to grip onto items, these being more effective at holding heavy items due to the extra force able to be applied. There are many types of tongs including barbecue tongs, salad tongs, blacksmith tongs, crucible tongs, ice cube tongs, sugar cube tongs and fire tongs. Tongs are often called ‘a pair of tongs’ and the word comes from the Old English, ‘tange’ or ‘tang’, meaning ‘that which bites’. There is evidence of Egyptians using metal rods and tong like tools to hold objects over fire, in around 1450 BC. https://tenrandomfacts.com/tongs/Fire tongs are still used with most open fires in homes.Brass fire tongs with holding clip and flat rounded handle at the end.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, fireplace tools, tongs -
Flagstaff Hill Maritime Museum and Village
Domestic object - Razor, 1900's
This cut-throat razor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Cut-throat razor, part of the W.R. Angus Collection. Razor model No. 42, steel blade, in dark cardboard box, with bone handle, arrow shaped end; blade swings inside the handle. Razor made in Germany with blade made in Sheffield, England, in early 1900’s.Embossed on box "No. 42 / DES GERMAN MANUFACTURE", on handle "GOTTA", on blade "HAMBURG RING / REG. GOTTA REG. / SUPER FINE" and "FINEST SHEFFIELD STEEL / FORGED AND - - - HOLLOW / GROUND IN GERMANY" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, cut-throat razor, gotta razor, german made razor, personal effects 1900's, grooming equipment 1900's -
Churchill Island Heritage Farm
Functional object - Butter Churn, 1935
Butter Churns were commonly used on farms to turn cream into butter. The cream was placed inside the container and the lid was placed on top to prevent spillage. Turning the handle on the side of the box would move a paddle inside to agitate the cream and turn it into butter. This process would require approximately 20-30 minutes of consistent work to produce results. The Cherry & Sons model butter churn was used in the early parts of the 20th century and could make up to 6kgs of butter.Unpainted wooden box, with brass handle and wooden lidfarm, machinery, dairy, equipment, butter, churn, hand operated, churning, churchill island -
Kiewa Valley Historical Society
Telephone - Wall Mounted 184, Circa mid 1900s
This handset appeared via Australia Post Office and was to some degree manufactured in Britain just prior to 1939. During and after World War II these handsets were made in Australia. The handset belonged to the SEC Victoria and later the Kiewa Hydro Electricity Scheme. As this unit has a winder arm (to notify the switchboard) it would have resided in a workshop/machine shop and not in an office. The durability of the bakelite covering gave good protection in any environment. In years later the bakelite came in colours. This type of handset being able to endure rough handling was ideal for the surroundings of the alpine terrain. It would have been at the various outside outposts or foreman posts as swift communications was essential and communications with all sectors of work in the Hydro Electricity Scheme was mandatory, not only for safety reasons but also for efficient operational day to day progress. Also refer to article in "This Week" Newsletter 30th June 2023. Article attached to paper copy.This Australian Post Office 184 black coloured bakelite wall mounted phone was initially developed by Ericsson Telephones Ltd Britain. It was used by the SEC Office based at Mount Beauty and therefore has a winder (for power and notification to the switchboard. The hand piece (large ear and voice receptors)is placed vertically above the dial up winder.On the winder plate in hand writing is" turn handle lift handset" and below the handle "when finished replace handset turn handle"sec communications, wall telephone, internal communications kiewa hydro electricity scheme -
Vision Australia
Functional object - Object, Lady Nell Seeing Eye Dog School spoons, 1980s
Three commemorative, but also usable, spoons with 'Lady Nell' and 'Seeing Eye Dog School' on a beige background, around a blue and beige circle with a dog in harness in the middle. An orange background as the outer rim makes it resemble an eye. The bowl and handles of the three spoons vary in design. Spoon collecting was a popular hobby during the late 1970s and early 1980s amongst souvenir hunters who found it an easily portable way to track their travels and interests. 3 silver plated spoons with various bowl and handle shapesfundraising, lady nell seeing eye dog school -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Ammunition Box, 1944
Box is marked "W.C.C.U" - perhaps Wesley College Cadet Unit. In earlier times, school cadet units were allowed to learn safe handling of weapons including the Vickers machine gun. This object probably held belted ammunition.Sheet metal ammunition box, probably for .303 inch belted ammunition. Double hinged lid, Leather handles. Painted green Manufacturer's stamp at each end.: " R P L" over "S" over "1944" On one end in white paint "2" On top in white paint : "W.C.C.U" - and "2" ammunition box -
Flagstaff Hill Maritime Museum and Village
Tool - Adze, Mid-20th century
An adze is an ancient and versatile cutting tool and has been in use for thousands of years. Adze are similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. They have been used since the Stone Age. Adzes are hand tools used for smoothing or carving wood.The adze has been used for centuries for cutting and shaping wood. It is a maritime tool, as well as being used in other trades. This adze is an example of that tool.Tool; long wooden curved handle with a heavy shaped head, similar to an axe. Inscriptions are on the blade. Made in England.Stamped; "38" & "2" " Made in England"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, axe, adze, ship's adze, tool, hand tool, wood working tool, cutting tool -
Kiewa Valley Historical Society
Grinder/Mincer - Meat
Old farm kitchen tool used for mincing meat manually.Used at Tawonga, in the Kiewa Valley, by resident Des WartonCast iron with dull smooth surface consisting of a tap to screw it onto a table, a barrel enclosing the auger that turns when the handle is wound around and forces the meat to spill out of a circular grinder. The hand crank is curved with a wooden knob . The outlet is oval shaped.Embossed on barrel: "Universal" Embossed on outlet "2" Embossed on handle "L.F. & c - New Britain Conn U.S.A."household tool, kitchen, meat mincer, grinder, universal no. 2 -
Churchill Island Heritage Farm
Functional object - camp oven
Also known as Dutch Oven, a camp oven is traditionally made from cured cast iron. Hung by a length of wire affixed to the side handles, they are suspended over an open fire or placed directly into the coals. The latter was more popular in Australia, and camp ovens were extensively used due to its versatility and ability to easily cook most types of food.3 legged round camp oven with lid and 2 side handles. Pitted with rust.camp oven, churchill island heritage farm, bush cooking -
Churchill Island Heritage Farm
Tool - Hand drill, c1960s
This hand drill was colloquially called an ‘egg beater drill’ due to its method of operation, and was aesthetically similar in appearance to the ‘breast drill’, with the former having a rounded handle instead of a concave bracing surface. Originally designed for drilling into metal, its gears allowed for higher rotation speeds and finer accuracy. This drill was probably manufactured in the 1960s by German company BECON. Distributed in Australia by Beck & Coram, it was widely used and easily accessible.Hand drill with red wheel, dark red paint remnants on handleBECON D129hand drill, hand tools, wood working tools, churchill island -
Vision Australia
Award - Image, River Run trophy
A metal cup with handles and lid sits on top of a plastic mound. Inscribed on the cup are the words "River Run, Winner of Perpetual Trophy, Health Fitness & Vitality, Presented by Golden Bowl Sports Centre". At the base of the award are listed the names of past winners: 1978 Rob Wallace, 1979 Eric Sigmont, 1980 Rod Pitt, 1981 Robert Gilfillin, 1982 Eric Sigmont, 1983 Max Little, 1984 Dennis Clark, 1985 Michael Hillardt, 1986 Robin Rishworth, 1987 Malcolm Norwood. Image of tarnished metal cup with lid and two handlesRiver Run, Winner of Perpetual Trophy, Health Fitness & Vitality, Presented by Golden Bowl Sports Centreassociation for the blind, awards -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tools, 2x Gimlet, boring screw, c1900
A gimlet is a hand tool for drilling small holes, mainly in wood, without splitting. A gimlet is always a small tool made of a piece of steel of a semi-cylindrical form, hollow on one side, having a cross handle at one end and a worm or screw at the other. A similar tool of larger size is called an auger. Early settlers in Moorabbin Shire had to be self reliant as they established their farms and built their homes using tools like this gimlet. 2 x small hand tool with a screw point, grooved shank, and cross handle for boring holes early settlers, pioneers, market gardeners, moorabbin, bentleigh, brighton, cheltenham, tools, blacksmiths -
Waverley RSL Sub Branch
Trenching Tool (head)
The intrenching tool of the Australian soldier was a British design. It is carried in an Australian leather infantry equipment blade carrier, commonly known as P15 equipment The Australian version was made of two pieces, riveted together with three rivets. The depth of the handle (helve) collar is considerably thicker than the accepted British pattern of the same time. http://www.grantsmilitaria.com/Steel trenching tool head with shovel enf and pick end Oval hole for fitting handleStamped AUSTRALIAtrenching tool. entrenching tool -
Kiewa Valley Historical Society
Slicer Bean, early 1900's
This large bean slicer was first manufactured in the late 1800's in England and exported to Australia. Due to the transportation costs it was not used in many Domestic kitchens. This slicer would have been in a kitchen of a higher socio/economic family within the Kiewa Valley. In the 1930's the manufacturer traded this slicer as "domestic labour-saving slicers". This was the beginning of new generation of the kitchen "gadget". The introduction of the Asian "gadget" manufacturer from the late 1950's saw English export diminish by the cheaper Asian products.This item has great significance because it demonstrates that even "remote rural" locations, such as the Kiewa Valley in the early 1900s still were able to optain "state of the art" labour saving "kitchen" appliances. It was these English and European goods that were made "to last" which brought the mind set "British is best" This mindset was only altered by periods of Australian economic down turns and the cheap Asian product availabilityThis bean slicer is made from cast iron with a round body housing three rotating blades screwed into a riveted spinning base plate. The whole body of this slicer is green with a "natural coloured" handle. A "G" clamp is part of the main frame to fasten the slicer onto a table/counter top (when in use). On the side of the handle and along the top plate "SPONG & Co Ltd" and opposite "BEAN SLICER" below this "No 633"domestic kitchen time savers, food processors, bean slicers