Set of thirteen colour photographs of the repair of the broken joint in Wendouree Parade as part of the track works in the area. Photos taken on 15 and 16/3/2003, printed on AGFA paper. 2555.1 - Gary Wood, Oedf Byslma looking at the excavated area, with sleeper cutting going on in the background. 2555.2 - Gary Wood and Alan Snowball, cleaning rails and the area, shows status, which was tight to gauge. 2555.3 - Removing sleepers. 2555.4 - First sleeper installed. 2555.5 - Cutting sleepers to length - Rolf Jinks and Andrew Mitchell. 2555.6 - Installing sleepers. 2555.7 - All 4 new ones positioned. 2555.8 - Cutting bolts from old plate. 2555.9 - Bending the rail. 2555.10 - Tram 33 at the temporary terminus. 2555.11 - Rail repositioned. 2555.12 - Installing the screw spikes - Gary Wood, Alastair Reither, Andrew Mitchell and Alan Snowball. 2555.13 - Welding the plates etc - 16/3/2003 - Alan Snowball.trackwork, wendouree parade, track, tram 33

Four page colour laser printed document presenting photos of the BTM Isolating Transformer, following its failure, at the ABB's Yarraville Workshop, on 8/11/2004. Photos taken with a digital camera. Document prepared using MS Word. Shows transformer in the partly dismantled state. Note - not all images used in the document. Two copies held. Ten digital images held on file. See Reg. Item 3230 for transformer plates. btps, substation, depot, electric traction, electric failure

Souvenir Teaspoon featuring Ballarat tram No. 33 in a Square inset at the top of the tea spoon, contained within a plastic case. The teaspoon made by Perfection Plate, of the Galaxy style or type. The teaspoon made by Perfection Plate, of the Caprice style or type. The case is clear plastic, hinged on the left hand side, with a clip on the right hand side and wrapped in plastic. Inside and on top of the case for display purposes is a folded sheet of cardboard, printed with a decorative design on the spoon side and a short item about Australia - the island continent. On the base of the item is details of the manufacturer, and web site. The teaspoon is silver plated, with the tram in a picture 22mm round. Tea spoon is 116mm long x 25mm wide. Case is 163mm high, 43mm wide, by 16mm deep. Made early 2000's. See Reg Item 3205 for an earlier example of this teaspoon. trams, tramways, teaspoons, sales items, btm

Souvenir Teaspoon featuring Ballarat tram No. 26 in a round inset at the top of the tea spoon, contained within a plastic case. The teaspoon made by Perfection Plate, of the Caprice style or type. The case is clear plastic, hinged on the left hand side, with a clip on the right hand side and wrapped in plastic. Inside and on top of the case for display purposes is a folded sheet of cardboard, printed with a decorative design on the spoon side and a short item about Australia - the island continent. On the base of the item is details of the manufacturer, and web site. The teaspoon is silver plated, with the tram in a picture 22mm round. Tea spoon is 116mm long x 25mm wide. Case is 163mm high, 43mm wide, by 16mm deep. Made early 2000's. See Reg Item 3207 for an earlier example of this teaspoon. trams, tramways, teaspoons, sales items, btm

Yields information about a piece of the original equipment from the ESCo Ballarat power station.Colour photograph of the ESCo Wendouree Parade power station - DC face plate starter for one of the rotary converters - DC hand operated drum and multiple lever panel" - see Jan. 1998 issue of Fares Please! for details of the donation and a copy of the photograph as used. Photo taken by Warren Doubleday. Printed on Kodak Paper. Photo taken mid Dec. 1997. Photos of cabinet with doors opened and signs added 2/4/2018. Images .1 - Brookhirst makers plate with Patent Nos. .2 - Machine with doors open .3 - wiring diagram .4 - Brookirst cabinet latch at the bottom of the machine. .5 - Safety sign re opening the doors. .6 - bottom section of cabinet with cable found in machine .7 - top half of machine .8 - similar to .6 .9 - close up of the cable. See January 1998 Fares Please!esco, power station, rotary converters

Yields information about the appearance of a 22E maximum traction truck on a Geelong Bogie TramBlack and white digital print from scan of a donated negative showing the Maximum Traction 22E truck of a bogie tram, parked in the depot area. Assumed photo taken on the same day as the others - 21-8-1955, shows the Builders Plate and the SEC logo. Black and White prints made from scan of negative. Original Negative stored with Negatives. Negative scanned at hi res 4/6/2020 and image updated.On left hand side of the negatives in ink is "EH 34"tramways, trams, geelong, depot, tramcar bodies, 22e trucks, sec

Souvenir Teaspoon featuring Ballarat tram No. 40 as the last ram in 1971 in an inset at the top of the tea spoon, and No. 1 Horse tram 1887 in the bowl of the teaspoon contained within a plastic case. The teaspoon made by Perfection Plate, of the Vista style or type. The case has blue plastic base, with clear top with the words "Vista by perfection" printed do top. On the rear of the case is the wording "Perfection". The teaspoon is silver plated, with the tram in a picture 15mm diameter on top and oval shaped in the bowl about 25mm long. The teaspoon is marked "Vista" on the rear, with "Perfection Plate Australia" along the handle of the spoon. Tea spoon is 112mm long x 25mm wide. Case is 125mm high, 32mm wide, by 16mm deep. Made early 1990's? Second copy added 19-6-2017 - no case from donation of S. Hall - see related documents for email chain. trams, tramways, teaspoons, sales items, btps

Book - 10 pages + 13 drawings sheets of rail cross sections contained within separate printed covers (colour fleck), titled "British Standard - Tramway Rails and Fish Plates - Standard Sections and Specification - July 1903". Side stapled and then bound with a green tape on left hand side. Gives details of the standards of the materials, rolling, payment, conformity, testing, marking holes for both rails and fishplates. Drawings for 13 different weight rails, straight and curves, 90lb/yard to 116 and a drawing of the BS tyre profile for tram car wheels and how it interfaces with a rail. On rear cover, both sides gives a list of standards and foreign translations up to March 1919.On top of first sheet in black ink "Ballarat Tramway Preservation Society Catalogue No 8."trams, tramways, british standards, standards, rails, fishplates

Black and White copy print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Copy photograph of a photograph from a book (Plate 1) showing a view along High St Eaglehawk, looking west, c1895. Shows buildings on both sides of the street. Has name J. Nimmon? or Ninnis (see btm 4372) in the bottom right hand corner. See also Reg item 5729 for a similar photograph. .1 - On rear in ink "Steam track tracks, Eaglehawk. (So much for the AETA boys who believe steam service did not cross the railway on the level!). In bottom right hand corner is "P. W. Duckett" trams, tramways, bendigo, high st, eaglehawk, steam trams

Yields information the appearance of the SEC tramcar No. 21, and the south east corner of Sturt and Lydiard Streets in 1958 and an AETA tour.Digital image from the Wal Jack Ballarat Album of No. 32 at the Barkly St terminus, Mt Pleasant, 1-1-1945. Has the corner of the milk bar in the photograph. Note the clock in the photograph on the left hand side of the print. See image i2 for rear of photograph. See image i3 for hi res scan of print. See image i4 for hi res scan of negativeon rear of photo in ink, "Ballarat, No. 32. Mt Pleasant terminus. 11.20am, 1/1/45. Note plate on trolley wire". In the top right hand corner is the W. Jack stamp and has the negative number T68.trams, tramways, mt pleasant, barkly st, tram 32

Three orange covered auction catalogues with black printing for a sale on 27th, 28th, 29th, 30th Nov. and 1st December, 1978 under instructions from West Gate Bridge Authority. For sale was steel fabrication and bridge machinery, cranes, winches, plant 93 buildings (prefabricated and built on site) 40 motor vehicles and mobile plant, extensive stores, many tons of steel plate, girders and scrap, furniture and general equipment. J. H. Curnow & Son Pty. Ltd. Were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - west gate bridge authority, j h curnow & son pty. ltd, f c dyett, i m dyett, bolton bros print

The original idea to create a monument was conceived by William Cameron. The monument was first constructed of cement block tiles and was a memorial to all those who served in WW1. Later gates were added to the precinct in memory of those who served in WW2. Restoration of the Memorial took place in 1995, with the original tiles being replaced by replaced by re-inforced concrete. Mt Macedon Memorial Cross is a significant War Memorial in the district. ANZAC Day dawn service is held at the Mt Macedon Cross, it is an impressive setting.Glazed precast cement block coloured to resemble sandstone, mounted on wooden stand. Centre front is a metal plate inscribed : Mt Macedon War Memorial Cross.On the back of the stand is a printed description of the construction history of the Mt Macedon Memorial Cross. No 77, on white sticker ( previous cataloguing number) memorial

(1) An older man seated in an armchair with an upholstered back with a carved top playing an accordion? He is wearing shirt, cardigan, trousers, lace up boots and a cap. His walking stick is hanging on the back of the chair. (2) A middle aged man sitting in front of a brick fireplace playing an accordion. The instrument has a plate near the keys with 'The Grand Organ' printed on it. It has decorative scroll work on the corner near the keys.photo, individual, male, peter ellis collection, accordion/concertina players

Nippon dolls were made by Noritake in Japan. This example is referred to as a China glazed doll. They were made about 1915. The shoulder plate bisque dolls were usually under 10inches tall.Stuffed doll with ceramic face, decolletage, hands and feet. Dress machine sewn from cream and brown printed material. Arms and legs made from browncolored linen type material. Eyes (blue), eyebrows (brown), hair (black) rouge (pink) and lips (red) painted on. Dress tied at back with pink embroidery cottontoys, dolls, sewing

Book - 240 pages + end papers + hard covers + dust jacket titled "Life after Gold - Twenthieth-Century Ballarat" Dust jacket printed in colour, sewn sections, end papers glued to cover. Has table contents, list of illustrations, list of maps, acknowledgements, table of conversions, an index, appendices, abbreviations, notes, bibliography. non-fictionDetails the history of Ballarat following the 19th century gold discoveries and how Ballarat changed its industry and social life in particular after the 1st and 2nd world wars and the change of Government policies in respect of trade and social welfare.ballarat, local history, 20th century social history, social history

Detailed in The Met colour scheme of the 1980s with the logo of the early 1980s. Demonstrates an operable model of a Melbourne SW5 class tram.Model of Melbourne Melbourne tram W5 (actually an SW5) No. 812, electric model, made by Cooee Concepts Pty Ltd in China. The model is packaged in a wooden packing case with a blue felt base, contained within a cardboard outer case. The cardboard cover or case has a printed sheet giving details of the model and the history of the W5 Class tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swiveling bogies, the destination of St Kilda, showing route 16. Headlights function in the direction of travel. The package has a manufacturing date of 2008 printed on it. Contains a plastic cover strip, a plastic holder for the tram, a plastic lift-out strip, a printed Certificate of Authenticity, No. 553 of 700, and a folded sheet giving instructions for the use of the tram on a model tramway - up to 15V DC.models, the met, tramcars, w5 class, sw5 class, tram 812, cooee, cooee collectables

Detailed in Bendigo Tramways livery of their Restaurant Tram "Ninesevensix". Demonstrates an operable model of a former Melbourne W6 tram as a Bendigo Restaurant tram.Model of Melbourne Melbourne tram W6 976 dressed as the Bendigo Tramways Restaurant / Cafe tram "ninesevensix", electric model, made by Cooee Concepts Pty Ltd in China. The model is packaged in a wooden presentation case with a black felt base, contained within a cardboard outer case. The cardboard cover or case has a printed sheet giving details of the model and the history of the tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swiveling bogies, a destination of "Special" and showing route 01. Headlights function in the direction of travel. The package has a manufacturing date of 2008 printed on it. Contains a plastic cover strip, a plastic holder for the tram, and a plastic lift-out strip.models, tramcars, cooee, cooee collectables, bendigo tramways, tram 976, restaurant tram

Item of family crockery donated by a Jean Woollard, KHS member, and Kew resident. Her family, residents of Kew since the 1860s, was highly involved in the political life of Kew. William Woollard was a councillor and mayor while Herbert Woollard was also a councillor and a member of the local Labor Party BranchGlazed earthenware tea cup, saucer and plate with transfer printed decoration, using the 'Hawthornden' pattern by Ridgways. The underneath of each item bears the maker's mark and a pattern registration date for April 1880.dinnerware, ridgways (1879-1920), earthernware, staffordshire ceramics, hawthornden pattern - reg. april 1880

Handpainted plate featuring couple playing tennis. Printed on base, hallmark and 'MZ/AUSTRIA'. Materials: Ceramic, Pigmenttennis

A photographic reproduction print from a colour-tinted glass plate slide, of people playing tennis in a park, with seated children in the foreground, in Troy, New York. Materials: Photographic emulsion, Papertennis

One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."6th - Tooling and Edging the back edge of curb. Metal dividing plates partly withdrawn" street works, kerbing, gutters, concrete, portland cement association

Printed cardboard container used to retail nickel plated 'best lills', which were small pins.4 oz nett / Dandy / Solid Headed Nickel Plated / Best Lills / Made in Australiadandy pty ltd, containers, pins

Small printed cardboard container produced for, or by, Kirby Beard to retail pins.Kirby Beard Regd / Quality Plated pins / Made in England by / Kirby Beard & Co Ltd / Birmingham, London, Redditchcontainers, pins, kirby beard & co ltd

The chapter on Tara Hall formed the introduction to 'Lovely Old Homes of Kew' by Dorothy Rogers.This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand. The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.A photographic reproduction of a plate published by H. de C. Kellett in 1891. The original photographer was J.F.C. Farquaher. The photograph shows Tara Hall (the Byram) in Studley Park Road. The house was demolished in 1960.Tara Hall. Built 1888 (see story). Taken from old faded photo. Not printed. Tara Hall now demolished - taken from old faded photo of Clifton House. [sic]byram, goathland, tara hall, dorothy rogers, studley park road (kew)

Sir John Madden, Chief Justice of Victoria, opened the Auburn Heights Recreation Club in Barkers Road in December 1904. Two years later the greens were improved and a new croquet lawn established. In September 1906, a ceremony was held to open these and also the new pavilion designed by Harry Tompkins.Early glass plate negative representing the opening of an important sporting facility in Kew in 19061/4 plate glass negative (and accompanying print) of after the 'first bowl' on the improved greens at the Auburn Heights Recreation Club in Barkers Road, Kew. The event occurred in 1906.auburne heights recreation club, cotham road, kew, sir john madden, harry tompkins

Sir John Madden, Chief Justice of Victoria, opened the Auburn Heights Recreation Club in Barkers Road in December 1904. Two years later the greens were improved and a new croquet lawn established. In September 1906, a ceremony was held to open these and also the new pavilion designed by Harry Tompkins.Rare and important early photograph of the opening of a significant sports club in Melbourne1/4 plate glass negative (and accompanying print) of the crowd at the opening of the new greens and croquet lawn in 1906 at the Auburn Heights Recreation Club in Barkers Road, Kew. Spectators, including many women, watch the opening game of bowls on the redeveloped green. While there are no photographs of women playing in the four glass negatives, the Club made a point in its statements to the press that women were invited to ‘indulge in this enjoyable recreation’.auburn heights recreation club, lawn bowls

Sir John Madden, Chief Justice of Victoria, opened the Auburn Heights Recreation Club in Barkers Road in December 1904. Two years later the greens were improved and a new croquet lawn established. In September 1906, a ceremony was held to open these and also the new pavilion designed by Harry Tompkins. Ninety-two years later, following the amalgamation of Auburn Heights and the Kew Bowling Club in 1998, it was renamed the Kew Heights Sports Club. In 2012, the amalgamated Club was renamed the MCC Sports Club.An early, rare photograph of a significant sporting institution in Kew.1/4 plate glass negative (and accompanying photographic print) of bowling at Auburn Heights Recreation Club opening in 1906. The Club was/is located in Barkers Road, Kew. At play on the redeveloped greens of the Auburn Heights Recreation Club at the official opening of the new pavilion in September 1906. auburn heights recreation club, barkers road, kew

Sir John Madden, Chief Justice of Victoria, opened the Auburn Heights Recreation Club in Barkers Road in December 1904. Two years later the greens were improved and a new croquet lawn established. In September 1906, a ceremony was held to open these and also the new pavilion designed by Harry Tompkins.Rare early image of an important sports club in Kew1/4 plate glass negative (and accompanying print) of a scene at the opening of the new greens and croquet lawn at the Auburn Heights Recreation Club in 1906. A player at the Auburn Heights Recreation Club, identified as a Mr Anderson in faint writing on the sleeve of the glass negative, considers his next bowl. His attire, and that of the players in the other photos would indicate that players were expected to wear a shirt, tie and jacket at the Club, but when bowling, waistcoats were acceptable.auburn heights recreation club, barkers road, kew

This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand.The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.A print made for Dorothy Rogers of a book plate originally published in F.G.A. Barnards 'Jubilee History of Kew' (1910) showing a view of Barnard's pharmacy and post office on the corner of High Street and Cotham Road, where the Kew Post Office was to be built in 1888."Barnard's Post Office on present P.O. corner prior to 1880. 1st P.O. was in Houwiesons Shop. This is the site of The Block . See other photo"francis barnard, dorothy rogers, kew post office

This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand. The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.A photographic copy of a book plate made for the historian Dorothy Rogers which was first published in the 'Jubilee History of Kew' (1910) by F.G.A. Barnard"Athenaeum built 1860. 1865 purchased & Town Hall built around it. Later a new front was added as in picture - note old lamps - At present under demolition for Safeways Store"athenaeum hall, walpole street, kew town hall, walpole street, dorothy rogers