Newspaper Clipping from "The Mail", 27 April 1993, Page 3, "Grant"'.The Ringwood Council has received a $23,000 grant to improve its Meals on Wheels program. The grant, made through the Home and Community Care Program, will enable Ringwood to establish its own Meals on Wheels kitchen later this year. Ringwood had bought meals from Nunawading for many years, but Nunawading kitchen facilities were no longer able to cope with the demand.

This list shows the names of the Pioneer settlers with the amount of Acres, the date purchased from The Crown and the Lot or Portion Number in the Land of the Henry Dendy Special Survey of Brighton 1841, in the County of Bourke , Victoria. The Squatters ,who arrived in the area first, used the land for grazing sheep and cattle. The Squatters had the right to graze unoccupied Crown land for ₤10 per year rental and a per capita payment for animals grazed. They could develop , improve and clear the land for the purpose of the tenancy but ownership was not permitted. When the land became useful The Crown put it on the market and the developers took over whilst the Squatters lost the improved land, dwellings and out buildings, there being no compensation paid. Squatters named John and Thomas Martin 1840-41; Richard and John King 1840- 1854 ; M.N.M.Moysey and M.J.Bickford 1841-1852 ; James McMahon 1846-1853 ; Daniel MacKinnon 1839- 1840. The 5120 Acres of the Henry Dendy Special Survey 1841were divided into approx. 83 Portions / Lots with varying acreage . Josiah Holloway, a speculator purchased 625 acres of the King Brothers run and re-sectioned the land into 2 acre Lots for Sale as market gardens. It was called The Two Acre Village later known as Cheltenham. A List of the names of The Pioneers in County of Burke Victoria c1841-1887 compiled by Lesley A. Schumer in 1985 A 3 Laminated display on wall in room 2 THE PIONEERS, Signed L.A. Schumer moorabbin, brighton, cheltenham, bentleigh, market gardeners, pioneers, early settlers, dendy henry, henry dendy's special survey 1841, squatters, king john, martin john, mcmahon james, two acre village, holloway josiah, were jonathan binn, grazing, cattle, sheep, market gardens,

Newspaper Article 1, 'Visits Schools', published in The Australian Jewish News, 1960s. Newspaper Article 2, 'Mefakeach For Education Board', published in The Australian Jewish News, 1960s. Newspaper Article 1: "Mr. Saul Ben-Haim, Israel Consul General, accompanied by Mr. Walter Duffield of the State Zionist Council of Victoria, visited Bialik College last week. He was welcomed by head-master Mr. A. Chowers and Vice President of the College Council Mr. Israel Kipen. He spent over an hour at the school observing the children at work in the classroom. Pictured (lower right) David Gross, Mr. Ben-Haim, Karen Zuker and Mr. Chowers listening to the children reading in Hebrew." Newspaper Article 2: "The United Jewish Education Board passed the following resolution at its recent full board Meeting:- That not having been successful in procuring the services of a suitable Director of Education the Executive has decided to appoint appropriate persons in a part time capacity to take charge of improving the teaching of particular subjects with the title of "Mifakeach". That Mr. Chowers be retained as "Mefakeach" for the purpose of improving the method of teaching the syllabus of the Education Board in respect to Ivrit and history..."shakespeare grove, hebrew school, judaism

A screwdriver is a tool, manual or powered, for turning (driving or removing) screws. A typical simple screwdriver has a handle and a shaft, and a tip that the user inserts into the screw head to turn it. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw—or ridged or treated for additional 'grip'. Handle are typically wood, metal, or plastic and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. The handle and shaft of screwdrivers have changed considerably over time. The "Perfect Pattern Handle’ screwdriver was first manufactured by HD Smith & Company, which operated from 1850 to 1900. Screwdrivers were probably invented in the late 15th century, either in Germany or France when Screws were used to construct screw-cutting lathes, for securing breastplates, backplates, and helmets on medieval jousting armor—and eventually for multiple parts of the emerging firearms, particularly the matchlock. The jaws that hold the pyrites inside medieval guns were secured with screws, and the need to constantly replace the pyrites resulted in considerable refinement of the screwdriver. The screwdriver depended entirely on the screw, and it took several advances to make the screw easy enough to produce to become popular and widespread Canadian P.L. Robertson, though he was not the first person to patent the idea of socket-head screws, was the first to successfully commercialize them, starting in 1908. In Portland, Oregon, Henry F. Phillips patented his own invention, an improved version of a deep socket with a cruciform slot, today known as the Phillips Screw. Phillips offered his screw to the American Screw Company, and after a successful trial on the 1936 Cadillac, it quickly swept through the American auto industry. A main attraction for the screw was that conventional slotted screwdrivers could also be used on them, which was not possible with the Robertson Screw. A large steel screwdriver with worn wooden handlepioneers, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, brighton, tools, craftsman, carpenters, , blacksmiths, builders, farmers, metalwork, woodwork, screws, philllips head screwdrivers, h.d.smith & co usa, p.l. robertson, henry f.phillips , oregon, canada, american screw company,

Yields information about the view of letter writers about the proposal for a Ballarat Tourist based tramway in 2002.Set of three newspaper clippings about the return or revival of a tourist tramway in Ballarat. .1 - Newspaper clipping - letter - from The Courier, Monday 15 July 2002 titled "Bring back Ballarat Trams" written by Neil Harris of Ballarat, supporting the concept. .2 - Newspaper clipping - letter - two letters - from The Courier, Thursday 25 July 2002 titled "The trams should go around the lake" and "Tram proposal is modern madness" from Pauline Shaw and Heather Smith respectively. .3 - Photocopy of a Newspaper clipping - letter - from the Courier, Wednesday 17 July 2002, titled "Tram money better spent on railway", written by Leah Anne Howie of the Western Improved Passenger Service - spend the money elsewhere. Each item has the date, source and page written in ink.ballarat revival, btm, city tramway

.1 - Pamphlet - folded A3 to A4, titled "Wellington Parade tram terminus upgrade" to provide a set of scissors cross overs a the Simpson St siding, improved safety for crews, pedestrians and for use during particularly special events. Has a map showing the extent of works, pedestrian crossings and car parks changes. Also shows two toilet blocks for crews in grey. On the rear has the dates for the drop in session. Has the PTV, Transport for Victoria and Yarra Trams logos. .2 - Pamphlet - 3 fold DL - printed on off white paper, titled "Buses replace Trams" - 25/10 to 1/11 Set of five digital images of pamphlets collected from Yarra Trams website 14-10-2020trams, tramways, wellington parade, simpson st, trackwork, construction, terminus, crossover

Mechanics Institutes were first established in the 19th century in Scotland and England to improve the education of working class men and to instruct them in their various trades. In Australia Mechanics’ Institutes were set up in the late 1920s with the first one in Melbourne dating from 1839. The Institutes in Victoria were (and some still are) a feature of Victorian country towns, usually consisting of a hall containing a Library and in bigger centres art class rooms and other recreation areas. The Woodford Mechanics’ Institute was established in 1861, enlarged in 1868 and burnt down in 1917.This seal is of major interest as it is the only seal we have of Mechanics’ Institutes in our district. These Mechanics’ Institutes were very important in the educational and social development of Victorian country towns. This is a seal or stamp made of brass and attached to a wooden handle. The wood on the handle is of a dark colour and is urn-shapedStamp - Woodford Mechanics Institutemechanics’ institutes, woodford, early mechanic institute seal

These 12 photographs were most likely taken in the 1990s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. In photos .1P and .2P the Printing Technician is placing a map negative or positive on top of the printing plate in a vacuum frame before light exposure. Photos .3P to .9P and .12P feature the new Howson Algraphy Autoneg printing plate processor. It improved quality control and efficiency and allowed the conversion of printing plates for positive or negative use. Processed printing plates were checked as shown in photos .10P and .11P before their installation on the printing press.This is a set of 12 photographs of lithographic technicians operating a new printing plate processor at the Army Survey Regiment, Bendigo c1990s. Photos .1P to .11P are on 35mm negative film and scanned at 96 dpi. Photo .12P is printed on photographic paper and scanned at 300 dpi. They are part of the Army Survey Regiment’s Collection. .1) to .2) - Photo, colour, c1990s, unidentified technician preparing printing plate in a vacuum frame. .3) to .7) - Photo, colour, c1990s, unidentified technicians operating new printing plate processor. .8) - Photo, colour, c1990s, L to R: CPL Mark Doherty, unidentified technician, LCPL John Bateman operating new printing plate processor. .9) - Photo, colour, c1990s, LCPL John Bateman operating new printing plate processor. .10) to .11) - Photo, colour, c1990s, LCPL John Bateman checking printing plate after processing. .12) - Photo, colour, c1990s, SSGT Russ Mollenhauer operating new printing plate processor. .1P to .12P – there is no annotations.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho

This item can be seen as a hand piece belonging to a logger or farmer spanning over one hundred or more years. The equipment was made to perfection as a hand tool and has not been improved upon since its introduction into the logging industry or farming fraternity. It can be used by one person or two (husband and wife or father and child). Its versatility is ageless. It can be used for domestic clearing of the paddocks, or for domestic fire places and stoves or commercial logging up until the 2000s (introduction of specific logging trucks that cut and treat the trees in one process).This item is very significant to the rural and logging regions within the Kiewa Valley. It has been used for domestic wood cutting and for industrial logging in the mid to late 1900s. It was used when clearing land for the SEC Hydro scheme and to allow for the introduction of the Mount Beauty construction workers' village (later developed into the town) The great advantage of this saw was that it uses only muscle power and can be located where ever a lumber "Jack" or property owner can venture. either by foot or by horse.This saw is a Warranted Superior One/Two Man Logging Saw. It has 68 teeth and is 42 inches long. At a position of one inch (2.5cm) from the end is a hole one inch down from the leading edge. There is another hole 45 cm in front of the handle. Both these holes are for a "helper handle" which when in use renders this logging saw fit for a two man operation. This is a cross cut saw for cutting down vertical trees (horizontal cut) The handle is made from wood and fastened to the blade by three heavy duty screws. The one helper handle stands 150mm high and has a 150mm wooden hand grip.The central screw has 25mm manufacturers' identification logo stamped "WARRANTED SUPERIOR".one or two man cross cut saws, forestry, timber industry

For an explanation about the history of steam engine indicators, visit: http://www.archivingindustry.com/Indicator/contentback.htm [last viewed 20 May 2013]. For information about the Richards' Improved Patent Steam-Engine Indicator see John Walter's publication 'The Engine Indicator: a short history of the autographic patterns from 1800 to the present day' - available online via: http://www.archivingindustry.com/Indicator/chaptertwo.pdf Information on Casartelli, Manchester is also available online via: http://www.archivingindustry.com/Indicator/chapterfour.pdf Refer pp.21-22 [last viewed 20 May 2013]Brass steam-engine indicator 125mm tall - accompanied by four steel piston springs - and a wooden measuring ruleIndicator [a] Casartelli Manchester [b] 41 ; Ruler [a] 12 to the Inch [b] No.2 [c] Casartelli & Son Manchesterrichards improved patent steam engine indicator, casartelli manchester

Continuous cutting chain was patented in 1905 by Samuel Bens of San Francisco, while the first portable chainsaw was developed and patented in 1918 by Canadian millwright James Shand. But the main advancements of modern petrol chainsaws occurred in Europe in the 1920s and 30s where Andreas Stihl is often hailed as the "father of the chainsaw" After the second world war lighter materials, metal alloys and improved engine designs revolutionised the logging and timber industry. Of interest on this model is the spacing of the teeth compared to modern machines. With a 4HP motor it has few safety features and is very heavyEarly model chainsawBurns ChainsawModel 106forest harvesting

The Smeaton Presbyterian Church was built in 1859 of locally made brick, and opened in 1860. The building committee was . Messrs. John Hepburn, W. McAlpine, W. Anderson, S. Moore, W. H. Clarke and W. Miller. It cost an estimated 1,200 pounds, and was assisted by Captain John Hepburn who donated 5 acres of land and 150 pounds for the church. The rest was contributed by the settlers and their employees. Around 1890, the outside brickwork was given a coat of cement, which has improved with age. In 1938 the grey stained exterior was described as “not altogether displeasing”. Colour photographs of Smeaton Presbyterian Church.smeaton, smeaton presbyterian church, churches, kooroocheang

The Wonga Park and District Residents' Association requested the Shire of Lillydale consider removing the crests on Jumping Creek Road Wonga Park east and west of the intersection with Yarra and Dudley Roads to improve visibility at the intersection. The Shire of Lillydale thought that this would simply increase the speed of traffic through the intersection and suggested a roundabout be built and came up with four alternative treatments. When they discovered that a roundabout would require water mains to be lowered and the M&MBW would not give a quote on the cost (which would be substantial) they opted for traffic islands instead.

Distributed to nurses during campaigning for improved wages and working conditions in the 1980s, possibly during the historic 1986 Victorian 50-day nurses strike. The title for a 'Grade 1' nurse is now a 'Division 1' or (more commonly) 'Registered Nurse'. The Royal Australian Nursing Federation (RANF) became the Australian Nursing Federation in 1989, suggesting that this button is from the late 1980s. Similar to the badges worn in this photo [https://stories.anmfvic.asn.au/86strike/media/2560-1440-landscape-sec2-contentb-hr_logwf7a.jpg] from 1986 (see individual on the far right).Circular blue and white plastic button. Silver metal, plastic-coated, with safety pin fastener adhered to back. Button printed with 'Don't ask me, I'm a Grade 1 nurse' and 'R.A.N.F. [Royal Australian Nursing Federation] Vic. [Victorian] Branch'.nursing, industrial action, nurses, strike action, unionism, badges, buttons, pins, campaigning, 1986 victorian nurses strike, trade unions, labour history

Distributed to nurses during campaigning for improved wages and working conditions in the 1980s, possibly during the historic 1986 Victorian 50-day nurses strike. The title for a 'Grade 1' nurse is now a 'Division 1' or (more commonly) 'Registered Nurse'. The Royal Australian Nursing Federation (RANF) became the Australian Nursing Federation in 1989, suggesting that this button is from the late 1980s. Similar to the badges worn in this photo [https://stories.anmfvic.asn.au/86strike/media/2560-1440-landscape-sec2-contentb-hr_logwf7a.jpg] from 1986 (see individual on the far right).Circular white and blue plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'Don't ask me, I'm a Grade 1 nurse' and 'R.A.N.F. [Royal Australian Nursing Federation] Vic. [Victorian] Branch'.nursing, nurses, industrial action, strike action, unionism, badges, buttons, pins, campaigning, 1986 victorian nurses strike, trade unions, labour history, royal australian nursing federation

Button distributed to and worn by Australian Nursing Federation (ANF) members. The ANF has been campaigning for more funding and qualified nurses to improve the quality of aged care for the past several decades, and continues to do so. Aged care campaigning became particularly prominent in the late 1990s and 2000s, with large campaigns by both the national and state/territory branches of the ANF. The Royal Australian Nursing Federation became the Australian Nursing Federation (ANF) in 1989, and then became the Australian Nursing and Midwifery Federation in 2013, suggesting this badge is from the 1990s or early 2000s.Circular blue, green and white plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'Quality Aged Care needs Qualified Nurses' and the ANF [Australian Nursing Federation] logo. 'needs' is italicised and 'Qualified Nurses' is underlined.nursing, nurses, unionism, aged care, lobbying, funding, badges, buttons, pins, staffing, trade unions, labour history, workforce, patient care, australian nursing federation, victoria

Melbourne’s next-generation trams, G-class, have been designed to be easily repaired with improved visibility for drivers. A prototype has been completed and will be tested by a range of groups before testing on the network in 2025. Department of Transport and Planning’s head of rolling stock development, Ben Phyland, said this redesign was a response to the number of crashes in Melbourne and after consultation with tram drivers. In 2022, there were 960 collisions involving trams and cars, including 166 considered serious – an average of three crashes each day and a 60 per cent increase on 2021. Digital image of a newspaper clipping from the Age titled: "Next-gen tram rolls with the crunches"tramways, g class, trams, planning

This collection of nine photos was most likely taken in Lithographic Squadron, Army Survey Regiment, Fortuna, Bendigo, c1970s to 1980s. The two Ultra-MAN-III Printing Presses were made in Germany at a standard map size format and introduced in June 1962 as a two-colour offset press with improved safety features. With an upgrade to a third colour deck in 1968, productivity greatly improved as the two presses could print a five-colour standard topographic map in two passes, rather than the three passes before their upgrade. They were replaced with a single Heidelberg Speedmaster 102 five colour Printing Press in 1990. There is more information on the Ultra-MAN-III, Printing Press on page 71 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. For additional photos, refer to item 6065.10P for Ultra-MAN-III presses. The Krause Wohlenberg in photo .5P was a heavy-duty guillotine to trim bulk printed map stock in the c1970s and c1980s. See item 6069.6P for more information and photos of guillotine equipment. Densitometer readings as shown in photo .6P were essential to the quality control of film and printing processes, reductions in time taken and material wastage.This is a set of nine photographs of Print Troop personnel and equipment from Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo, c1970s to 1980s. The photographs are on 35mm colour slides and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1970s, Ultra-MAN-III Printing Presses, L to R: unidentified technician, Laurie Sutton, SGT Jim Cook, unidentified technician. .2) - Photo, colour, c1970s, Ultra-MAN-III Printing Presses, unidentified technicians (x2). George Mann Fast Five Quad Demi Printing Press in background. .3) - Photo, colour, c1970s, Ultra-MAN-III Printing Presses, unidentified technicians (x2), George Austen in background and George Mann Fast Five Quad Demi Printing Press next to back wall. .4) - Photo, colour, c1970s, Ultra-MAN-III Printing Press, unidentified technicians (x2) operating George Mann Fast Five Quad Demi Printing Press in background. .5) - Photo, colour, c1970s, Krause Wohlenberg heavy-duty paper guillotine, unidentified technician. .6) - Photo, colour, c1970s, Densitometer reading taken by unidentified technician. .7) - Photo, colour, c1980s, Ultra-MAN-III Printing Presses, L to R: Janet Murray, Lance Strudwick, Terry Winzar, Komori Newkoni and Planeta Polygraph Printing Press in background. .8) to .9) - Photo, colour, c1980s, Ultra-MAN-III Printing Presses, Janet Murray, Komori Newkoni and Planeta Polygraph Printing Presses in background..1P to .9P - There are no annotations stored with the 35mm slides.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, printing, litho

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Digital copy of a business card advertising the Model Dairy in Belmont Avenue, Kew, managed by John Simonton. (The card was donated by John Harvey Simonton in 2021,)"Milk delivered fresh twice daily in / Kew, Hawthorn & Camberwell / All Milk guaranteed free from chemicals, used either to preserve or colour it / Our butter (Model Dairy Brand) / I Manufactured from Pure Cream by the most improved Machinery / [DRAWING] The Model Dairy Co Belmont Avenue Kew / Model Dairy Co / Belmont Avenue, Kew / John Simonton, Manager"model dairy -- kew (vic.), john simonton, belmont avenue -- kew (vic.), dairies -- kew (vic.)

These are sales photographs for William Tatham Ltd. of Rochdale. These photographs are taken in the fitting shop at William Tatham Ltd. where final assembly would have taken place. The scribbler was the first part of a group of machines known collectively as the carding engine. The photographed machine was made by William Tatham Ltd, a textile engineering company based in Rochdale, UK. Established in 1866 Tatham developed innovative textile machinery and send their products to Australia and other countries around the world.A black and white photo of a Two-Part Scribbler in a landscape format.Front - top margin: For description see over. Front bottom right corner - 1076 Rear - Two-Part Scribbler, Semi-Continental Type with Patent Automatic Feed having Extended Hopper. Cylinders in this case are 50” diam. Doffers 36” diam. Drive to strippers and other parts by ‘V’ Belts. Note improved guarding to Fancy Chain Drives, also feeder gearing.textile machinery, tatham, wool manufacture, scribbler, carding

These coasters depict scenes from Warrnambool – the Botanic Gardens, The Hopkins River mouth and the Wollaston Bridge. All are areas of historical and tourist interest. The coaster were produced to raise funds for Peters Project in Warrnambool, a charity organization dedicated to bringing improved cancer care services to Warrnambool. The organization was founded in 2008 by Vicki Jellie in memory of her husband Peter who died of cancer. The major aim of the organization was realized in 2016 when the South West Regional Cancer Care Centre was opened in a new building in Ryot Street and services to assist cancer patients in Warrnambool continue to be extended. These coasters are of some interest as examples of fund-raising material produced by the Peters Project committee to assist with the campaign to bring improved cancer care services to Warrnambool..1 .2.3.4 A wooden drink coaster with a felt base and a colour photograph pasted on the top section.1 Warrnambool Gardens .2 Hopkins River Mouth .3 Wollaston Bridge .4 Warrnambool Gardenspeter’s project, warrnambool, vicki jellie, warrnambool souvenirs

The first Seafarers Service was held on 23 October 1905 in the St Paul's Cathedral in London to celebrate the Centenary of the Battle of Trafalgar and the death of Vice-Admiral Horatio Nelson on 21 October 1805. Reverend Alfred Gurney Goldsmith launched the first Seafarers Service two years later and the first service was held on Sunday 10 November 1907. National and house flags are used during the annual Seafarers Service. The Melbourne Harbor Trust was established in 1877 to improve and operate port facilities for the growing city of Melbourne. It was superseded by the Port of Melbourne Authority in 1978 and later by the Port of Melbourne Corporation. The service continue to reflect the full range of the maritime activities in Australia. Representatives come from the Royal and Merchant Navies, the commercial world, shipping companies, mission and philanthropic societies, veterans’ associations, labour unions, youth and leisure organisations, but anyone is welcome to attend.Large blue rectangular flag with the Blue Ensign and two white anchors on the rightM.H.T written in black penflag, melbourne harbour trust, m.h.t., seafarers service

From the 1970's onward the relative isolation of regional areas was improving in "leaps and bounds". Social amenities, and life styles were changing at a great rate. Items such as this camera (recreational/life style/non professional) capture of the altering socio economic balance of rural based activities provided the catalyst for greater appreciation by city dwellers to the benefits of rural life. The greater levels of communicative avenues, especially the visual (photography, pictures, television and the internet), from the beginning of this period and throughout the time frame (1970 to the 2000s) has cut the major restraints of what was rural "isolationism".The significance of this type of camera, being a small two lens (normal, telescopic) and portable piece of equipment, allowed non professional tourists, locals or visitors to visually display the uniqueness of the Kiewa Valley and Alpine regions. This method of promotional and intimate visual reproduction of not only physical but also through personal involvement, of the photographer to the audience, a greater psychological impact, by the nature of intimacy involved. This type of photography is one of the most effective stimuli to promote the unique qualities of the Kiewa Valley region.This Item is dual lens (22mm,44mm) camera comprising of an elongated oblong shape, black hard plastic shell. It has a slightly rough surface(for a better fingers grip), two latches are located at the back, one to release the camera from its hinged protective cover and one to move to the next picture frame (film is within a cartridge).On swing cover "Kodak Tele 1 " on back in small print "MADE IN USA" On camera body "KODAK TELE EKTRA 1" underneath "CAMERA" and on slide switch(front) to change lenses:"Tele" and "Norm" kodak two lens camera, photographic hobby usa made camera

Early settlers had to be self sufficient, growing their own vegetables, making tools and clothing and usually had a house cow to produce their milk supply. .All the buttermilk separated from the butterfat had to be rinsed out. This would improve texture and flavour, and also help the butter keep well, since milk turns rancid more quickly than fat alone. Salt was usually mixed in at this stage - for flavour and preservation. The rinsing could be done simply by washing in water, followed by draining, salting and working or "kneading" the butter with a pair of wooden butter pats, or with bare hands. c1880 A pair of wooden butter patspioneers, early settlers, market gardeners, moorabbin, brighton, bentleigh, cheltenham, milk, dairy farmers, butter pats, dairy cows

Early settlers had to be self sufficient, growing their own vegetables, making tools and clothing and usually had a house cow to produce their milk supply. .All the buttermilk separated from the butterfat had to be rinsed out. This would improve texture and flavour, and also help the butter keep well, since milk turns rancid more quickly than fat alone. Salt was usually mixed in at this stage - for flavour and preservation. The rinsing could be done simply by washing in water, followed by draining, salting and working or "kneading" the butter with a pair of wooden butter pats, or with bare hands. c1880 2 wooden butter patsearly settlers, pioneers, market gardeners, moorabbin, bentleigh, brighton, cheltenham, dairy farmers, dairy cows, milk, butter

This was one of the older types of ring pessary and resembles a watch spring pessary. They were made in a wide variety of sizes and thicknesses, and came either just as a ring or with a perforated indian rubber septum. A new type of ring pessary was later made which improved on this design. Whereas this hard rubber/vulcanite style pressed on the vaginal wall, the new style instead provided a soft cushion thanks to a patent fluid filled design. This meant that the pessary did not collapse in the way air filled pessaries did, and meant that the pessary could remain in place for a much longer period without discomfort to the patient.Circular pessary made of black vulcanite. intrauterine device, pessary

This was one of the older types of ring pessary and resembles a watch spring pessary. They were made in a wide variety of sizes and thicknesses, and came either just as a ring or with a perforated indian rubber septum. A new type of ring pessary was later made which improved on this design. Whereas this hard rubber/vulcanite style pressed on the vaginal wall, the new style instead provided a soft cushion thanks to a patent fluid filled design. This meant that the pessary did not collapse in the way air filled pessaries did, and meant that the pessary could remain in place for a much longer period without discomfort to the patient.Circular pessary made of black vulcanite. intrauterine device, pessary

The National Wool Museum accepted a donation from Brian Licence in 2022 of several mementoes relating to his career in the wool industry. Brian studied Wool Classing and worked for a decade in this profession before moving to Melbourne which required him to change careers. These Wool Classing Clip Reports date from 1965 to 1966, there are 7 total. The reports give feedback to the wool classer about their clips recently classed. They include some suggestions as to how a wool classer may improve their performance, and how a wool grower may be able to increase profits from their flock.8 sheets of paper, slightly under a4 size at 260 x 205 mm. 4 sheets have a header from Elder Smith Goldsbrough Mort Limited, 2 from Bennett & Fisher Limited, and 1 from Roberts, Stewart & Company Limited. All Wool Classing Clip Reports have the same structure, a header from the sending company, a body paragraph of black ink from a typewriter, concluding with a signature at the bottom of the page. Some of the pages have yellowed with age, others have slight tears. Report 1 is by Elder Smith Goldsbrough Mort Limited. It is dated 4th March, 1965. Report 2 is by Bennett & Fisher Limited. It is dated 7th October, 1965. Report 3 is by Bennett & Fisher Limited. It is dated 11th July, 1966. Report 4 is by Roberts, Stewart & Company Limited. It is dated 12th July, 1965. Report 5 is by Elder Smith Goldsbrough Mort Limited. It is dated 9th November, 1965. Report 6 is by Elder Smith Goldsbrough Mort Limited. It is dated 5th July, 1965. Report 7 is by Elder Smith Goldsbrough Mort Limited. It is dated 26th October, 1965.Multiple. See Multimediawool classing

LADIES PONY GIG – circa early 1900’s) The gig was built by T Rose, North Melbourne. Australian coachbuilders adopted American designs and modified these to suit local conditions, eg mudguards added for muddy country roads. As roads improved, lighter and faster designs were made. These gigs were more comfortable than the normal farm cart / town cart (see nearby butcher’s cart), as they were often sprung for comfort rather than carrying heavy weights. (Donated by: Ivan & Gwen Russell, who purchased it from the Hogan Family, Tatura, in 1998) Ivan & Gwen Russell purchased this jinker from the Hogan Family at Tatura in 1998 "The only information we have is that it was built by T. Rose, North Melbourne. As it is in the original Condition we would like to donate it to the Numurkah Historical society to be displayed for others to enjoy. Black-painted ladies jinker (pony gig), with rubber tyred wheels, light hickory shafts, patterned black upholstery on seatT Rose Buildergig, jinker, horse-drawn vehicle, russell