Dr Bernard Johnson was elected on December the 6th December 1952 as the Faculty's first honorary Fellow. At the time, Johnson was the Dean of the Faculty of Anaesthetists, Royal College of Surgeons, England. He was invited to visit Australia to receive his award and in 1953 Johnson received his award and brought with him a notable gift being the local Dean's medal of office which was presented on behalf of the Royal College of Surgeons. Johnson had previously met with Ivan Jose and H.J. Daly by providing advice for the establishment of an Australasian Faculty. Johnson is a significant figure as a pioneer into intravenous anaesthesia into Great Britain. He then turned his attention to improving dental anaesthesia. Working with fellow colleagues R R Macintosh and W S McConnell, they established the ‘Mayfair Gas Company’, primarily for dental anaesthesia, but also provided anaesthesia for general surgery during honorary hospital sessions. Johnson participated in the development of the Faculty of Anaesthetists within the Royal College of Surgeons. A founding member of the Board of Faculty, he served as Vice-Dean and then was the second Dean (1952-5), a role which provided a seat on the council of the RCS England. A 9 carat gold [375] oval shaped Dean's Medal of the Faculty of Anaesthetists, Royal Australasian College of Surgeons secured onto a red coloured woven tape by two large gold links. Obverse depicts in coloured enamel secured onto base the RACS coat of arms and crest. Engraved around the sunken diameter are the Faculty and College names. The reverse side has the presentation details inscribed onto a plaque secured onto the main piece with three rivets with hallmarks on both the message plaque and the outer rim. The original red leather box is in poor condition. Printed on the inside silk cover are the maker's marks.[obverse] THE FACULTY OF ANAESTHETISTS / ROYAL AUSTRALASIAN COLLEGE OF SURGEONS [reverse] PRESENTED / BY THE DEAN / DR BERNARD JOHNSON / ON BEHALF OF THE BOARD OF / THE FACULTY OF ANAESTHETISTS / OF THE ROYAL COLLEGE OF / SURGEONS OF ENGLAND / AT THE INAUGURAL MEETING / 17th APRIL 1953 [hallmarks on reverse] GAS CO LTD 9 375 R Edinburgh? [black print on inside box cover] By appointment silversmiths to / THE LATE KING / GEORGE VI / THE [goldsmith's logo] / GOLDSMITHS & SILVERSMITHS / COMPANY LTD / CROWN JEWELLERS / incorporating GARRARD & CO / 112 REGENT STREET, LONDON W. I.dean medal, mayfair gas company, rcs england, johnson, bernard

Belonged to Kathleen Marjorie Dunn (nee McKenzie)Day dress in fine silky fabric. It has a blue, white and green floral pattern on a navy ground. The skirt is gathered to the waist in two places in front and has two darts at the back. The sleeves are short, set in, gathered at the shoulder and end in inverted V shapes. The bodice is shaped with two sets of gathers in front and two darts at the back. The square neck dips to a shallow point in front, fastens with six self-covered shanks behind and is edged with cream net frill (probably discoloured white). There is a side vent wiht four press studs on the left at waist level. The hem is hand sewn.Nonecostume, george evans collection

Item 19. Cream silk scarf. Material sewn double. One end has an embroidered airman's wings in cream and light blue, In the centre of the wings is a red, white and blue bull's eye and over the bull's eye is a brown kangaroo. Below the bull's eye is a pale yellow boomerang shaped area with 'Fighter 81 Wing' embroidered in it. Underneath it all is embroidered 'Hofu - Japan 1946'. At the other end are some embroidered flowers and leaves. The leaves are pale grey and cream and the flowers are three shades of pink. One pink flower has a cream edge and one flower is cream. The flowers have red centres.bendigo, clubs, bendigo heritage, german heritage society collection - silk scarf, fighter 81 wing, hofu japan

When Brighton was first incorporated as a borough in 1859, the first seal and coat of arms of the municipality depicted a market gardener. Spade in one hand and fruit in the other, the gardener is surrounded by a cornucopia of produce, a ploughman toiling the field behind him, and a mill in the distance. It is underscored by the motto ‘By their fruits ye shall know them’.Oil paint on metal on shaped wood shield, depicting a figure of a standing male pioneer holding a spade in one hand and fruit in the other. A fruit tree directly behind him, two pineapples to the right and a cornucopia bearing fruit to the left. Behind the pioneer are depictions of the sea with a ship, a farmer with a horse ploughing a field, a steam train, and a windmill. A black banner at the top of the shield has inscription BRIGHTON which sits above the Royal Coat of Arms. A red banner at the bottom has Brighton's motto 'FRUCTU NOSCITUR' which translates to ‘By their fruits ye shall know them’. Another black banner underneath: 1858.escutcheon, coat of arms, brighton, fructu noscitur, bayside, shield, heraldry, borough of brighton, market gardener, windmill, train, farmer

RVB Limited is now called Sirens and Horns and is still manufacturing sirens in Australia. A hand siren with an L shaped handle two centimetres wide and five centimetres long is attached to the base of a metal cylinder ten centimetres diameter and six centimetres long with the last two centimetres tapering to a six centimetre diameter opening which flares to a 12 centimetre opening in four centimetres. The handle is connected to a thin metal disc which vibrates when the handle is turned making a loud noise. The siren is attached to a wooden handle four centimetres by two centimetres and 21 centimetres long. It is all painted red. A label attached states, "Hand HURRICANE Siren, Made in Australia, Model no. HSI, RVB Limited."siren, alarm

A Dunlop Maxply, Vincent Richards International tennis racquet, with string whipping around shoulders plastic whipping around shaft, and a leather handle with diamond and triangle shaped perforations. On the obverse, the Dunlop Maxply trademark features across base of head and throat, above a 'Superb' Victor trademark. 'A Dunlop Production' logo features across the shaft. Model name, along with smaller decal of Dunlop Maxply trademark, features from the base of head down to the shaft, on the reverse. Dunlop 'D' trademark features on red butt cover. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, String, Enamel, Adhesive tapetennis

This item is from the "Barone" Collection. "Barone" (also known as "Seaview") was a stately Brighton home built at 9 Moule Avenue prior to 1855 and demolished in 1986. The house's residents included Edward Elgin Browne (during 1859-72), a Melbourne tea merchant, and the family and descendants of retired Scottish Army captain Archibald Black (during the period 1880-1970). Its neighbors included “St Ninians” owned by the Ward- Cole family, “Seacombe” owned by the Moule family, and the home of James Grahame and his family. The items in the "Barone" collection were largely donated by two of the house's later owners, Mrs Doris Halkyard and Mrs Brian Brandt.A pair of black wool twill women's jodhpurs from late 1800s to early 1900s. The jodhpurs feature a flat flap-front that buttons on either hip with four buttons on either side. The cut of the leg is full tapering through shaped panels to a slim fit over the calf. At the centre front of the leg at the shin, the pant leg is laced closed and finished with brown binding. From the back, the pant hangs loose and full over the bottom, tapering to a slim fit over the calf. Note: These jodhpurs are not a matching piece of the riding habit T0002.1. However, it appears that the same person wore them together as an outfit.barone, riding habit, seaview, jodhpurs, brighton

Mayor Harkness is best known for abolishing liquor from the Town Hall and replacing the Mayor's Ball with a Monster Sunday School Picnic for children which took place in Ravenswood in 1883 and was attended by 15,000 people. Abraham Harkness arrived in Victoria in 1857 aged 28. He was initially successful in his search for gold and after a return trip to England in 1862 returned to Bendigo where he opened a general store and then a foundry manufacturing mining machinery. He stood for council from in 1880 and was elected a further eight times over the next twenty years. Cr Harkness served as Mayor in 1882, 1897 and 1898. His son Andrew became Mayor in 1908-09. Abraham Harkness married Jane Elizabeth Noble in Bendigo in1864 and together they had six sons and five daughters. Abraham died in 1912 and Jane in 1927. This elegant silver service was gifted to Mrs Harkness by her husband the Mayor in remembrance of the event and then gifted back to the City.Four piece Victorian tea and coffee silver service consisting of tall coffee pot, tea pot, two handled covered sugar basin and covered cream jug. Oval, chamfered shaped base tapering at top. Bodies are decorated with foliate decoration and central finial entwined with cartouche which holds either the Bendigo Coat of Arms, or the entwined initials J E H except the large coffee pot which has engraved dedication to Mayoress Harkness instead of the Coat of Arms. Insulated handles on pots. 0432.1 Coffee pot 0432.2 Teapot 0432.3 Sugar Pot 0432.4 Cream Jug Stamped back top left of each part and inside lids - Makers Mark: Martin, Hall & Co (Richard Martin & Ebenezer Hall). Hallmarks; (Lion) sterling silver, (Panther head) London Assay Office, (Women's head in left profile) duty paid, (A)1876 on coffee pot, (G) 1882 on other three pieces.mayor harkness, mayoress harness

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a strong connection with the city of Wodonga through its service and training facilities at the Bandiana base on the edge of Wodonga. A shield shaped plaque carved with the emblem of RAEME corps (The Royal Australian Electrical and Mechanical Engineers corps). The edge of the shield is decorated with carved leaves. An engraved metal plate has been attached to acknowledge the presentation of the plaque to the Council of the Rural City of Wodonga. The rearing horse and chain are symbolic of power under control and the lightning flash, of electrical engineering. The rearing horse also forms part of the crest of the Institution of Mechanical Engineers and, together with the lightning flash, is intended to mark the close relationship which exists between the electrical and mechanical engineers in both civil and military life. The globe is indicative of the impact of engineering on the world generally.Attached to rear of shield "Presented to/The Council of the Rural CIty of Wodonga/ by/ The Commanding Officer and Members of/RAEME Training Centre/ 21 October 1978"raeme, australian army

Military cap dating from 1966, possibly worn by military personnel in West Germany.This cap is significant as an example of military headwear dating to 1960’s West Germany. Olive drab coloured forage or side cap lined with matching colored fabric. Cap has a flap on each side which may be unfolded. Side flaps are joined by by strip of fabric (all one piece), across the front of the cap which when extended, may form a covering for the mouth area. Flap may be secured with a silver stud button attached to each side of cap. Front of cap displays West German roundel in black, red, and yellow set in olive coloured diamond shaped piece of fabric. Off-white manufacturer’s label on inside, sewn to lining with white thread. Cap is size 54. On inside of hat: (in red) BAMBERGER MUTZEN INDUSTRIE (in black) US12d/22/15565/0028 IX/1966 /5 54 8405-12-138-8897

A poppet head is the framework above a mine shaft which supports the wheels for the winding cables. there where hundreds of poppet heads in Bendigo.Wooden model of a Poppet Head. A pyramid shape with a 32 centimetre square shaped base rising 45 centimetres to a 13 centimetre square top with two nine centimetre pully wheels mounted on it. Halfway from the base is a 22 centimetre square platform. It has a nine centimetre square opening with a cage in it that is attached to a pully above. There is a twenty centimetre by ten centimetre platform extending from one side, the opposite side has a six centimetre wide staircase leading to the ground. there is cage in the bottom platform that is attached to a pully on the top platform. The whole model has varnish on it and is a light brown colour.bendigo, gold mining, model, poppet head

The steam engine indicator, or dynamometer, is an instrument used on a steam engine (such as that of a vessel or train) to measure and record the change in the pressures of the engine’s cylinders during their operating cycle. The engineer would use it to identify problems or defects such as bad valve settings or constricted steam pipes. It could indicate the difference in efficiency caused by adjustments made to the engine, being able to instantly measure the variation of pressure from the engine stroke at any given time. This force of power would be registered by a pencil, fitted to the adjustable arm, which would trace a line on paper wound around the cylinder. The recorded information could be used in conjunction with mathematical tables. This particular instrument was made by T.S. Mc Innes, one of the better manufacturers of engine indicators. Mc Innes engine indicators were still being used in the mid 1900’s. This specific instrument was used by Mark Forsythe of North Berwial, Scotland and late of Ararat, Victoria when he was chief engineer on the “SS Talawena” in 1892. The Port of Warrnambool, in Victoria, harboured steam ships that carried both passengers and cargo along the south west coast in the late 1800’s and into the 1900’s. The engineer of a steam ship was responsible for reaching and maintaining the optimum level of steam energy to serve the locomotion and efficiency of the steam ship. The engineer would use a steam engine indicator to measure and record information to achieve this purpose. Engine Dynamometer or Steam Engine Indicator in square, fitted oak case. This brass instrument is used to measure and record steam pressure for setting up and adjusting valves on a steam engine. It has an oscillating recording drum with vertical, silver clip attached for holding paper in place around the drum. The drum oscillates left to right. There is a pulley attached to a length of cord, which is attached to the drum. Beside the drum is a fine metal arm, vertically adjustable, small hole in the end to hold a pencil. Inscription stamped into bracket of the arm. The engine indicator is mounted on a hinged side of the case that swings out ready for use. Attached chains prevent the side from opening past vertical. There is storage for other accessories and an empty compartment in the base (where a scale or ruler may have been located). The case has a collapsible wooden handle, brass hinges and two brass, hook-shaped catches. There is a code stamped inside the lid. It contains a brass, ‘T’ shaped steam-cock (or stop cock) with two open ends made of metal pipe with different sized threads. (Turning the handle on top opens and closes the space in the pipe and would close off the flow of steam from one end to the other.) Also inside the case are three different spiral springs, each with a threaded nut on the end that has a threaded hole inside it. Used by Mr Mark Forsythe when chief engineer on the SS Talawena in 1892 “T.S. MC INNES PATENT” and “522 _ _” (last 2 digits are unreadable) pressed into the arm of the brass indicator. “[ ] X ’ stamped inside the lid of the case. The 3 springs all have a number stamped into them: (1) “32” and “12” (2) “12” and “16” [above] “12” (3) “64” and “150” Card that came with instrument “This instrument was used by Mark Forsythe of North Berwial Scotland and late of Ararat, Victoria when chief engineer on the SS Talawena in 1892" dynamometer, steam engine indicator, t.s. mcinnes, glasgow, dobbie mcinnes, port of warrnambool, warrnambool, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road

Cream coloured taffeta wedding dress. Square yoke at front with spiral bead pattern and tassels of bead across lower edge of yoke. V shaped neckline at back with yoke and tassels. Short sleeves of double layer of net embroidered with flowers. Front and back of bodice of embroidered net. Neckline lined with 10cm cotton lace. Bodice fully lined with cotton fabric. Two vertical side panels of 5cm silk lace from shoulder to waist with triangular shaped tabs (12cm) extending to side seams. 5cm silk lace with 12cm triangular tabs across the waist at back of bodice. Taffeta floor length skirt 5cm lace with 12 cm triangular tabs extends from waist on LHS down to 3cm above hemline and extends across the front in a U shape to side on RHS and then across the back of the skirt in a U shape to the LHS. Triangular insert of embroidered net (45cm at hem) on LHS, from hem to 42 cm above hem. Centre back opening from neckline(25cm) fastened with seven metal hooks and eyes. Satin fabric belt with horizontal pin rtucks fastened with two metal hooks and eyes. Fabric circular buckle (5cm diameter). Lower edge of skirt lined with cotton fabric (14 cm wide). Semi-circular cotton padding stitched under arms.costume, female, cream coloured wedding dress

Clothing. Deep V neckline, front and back, has a tapered tie, at the shoulder to 4.5 cm, and slanted at the lower edge of the tie. The V neckline has a fine binding finish as do the armholes, and the lower edge of the bodice. Shadow, and pulled thread embroidery, in a floral design, outlines the V neckline in the front. A tiny 10 cm x 10 cm heart shaped pocket is bound at the edges and sits at lower right front. A small dart, 1 cm x 6 cm long is below the armholes, on each side seam. Fabric is cut on the cross to add flair. A two cm x 60 cms tie attaches at each side seam, and would tie at the back. Clothing. Pyjama pants have a V shaped waistband 11 cm deep at front and back, below which is a small 1.5 cm wide pleat on either side of front and back. An 11 cm deep plackett on both side seams - on the left hand side two x 1 cm pearl buttons and buttonholes fasten the plackett. The two buttons on the right hand side are missing. A panel of shadow embroidery decorates the outside lower edge of the trouser leg. Fabric is woven with a floral design. Lower edge of legs are finished with a fine binding. 11 cm peak at waistband. Pants with hem 88 cms, width at ankles 64 cms.Silk and Rayon Made in Chinacostume, female, pink silk pyjamas (bodice)

BHS CollectionSage coloured silk long sleeved dress. One piece full length dress. Full length side panels from shoulder to hem. Front of bodice extends below waist line to form two points on either side of front opening. Front opening is fastened with twelve fabric buttons (1-5cm) and button holes. Small standup collar(3cm) fastened at throat with hook and eye. Bodice shaped with two darts on either side of front opening. Small ruched pocket on LHS of bodice at waist level. Long narrow fitted sleeves shaped at the elbow. Decorative cuffs at wrists of ruched frilling (8cm) with triangularturned flap on top edge at back of cuff. Back of dress has four panels. The two centre panels extend below waist to to two points. The centre skirt panel is attached under the centre two panels and is gathered by five deep pleats to form a bustle effect extending to a long train. Front centre panel has horizontal gathering with ruched frills in centre, and at sides. Side panels overlap front centre panel. Hemline has pleated frill above the hem which is finished with cord. Skirt is lined with an open weave, brown cotton fabric. Bodice is lined with brown polished cotton. Hand stitched and machine stitched.costume, female, sage coloured silk dress

Otto Schott, a chemist and glass engineer, had the vision of uniform production ie making glass items that would resemble one another. At the end of the eighteenth century, with most glass items still created by hand, the quality of output was still a guessing game. Schott was the first to render this an industrial certainty. 1884 Otto Schott, Ernst Abbe and Carl and Roderich Zeiss found the Schott & Associates Glass Technology Laboratory in Jena, Germany. Glastechnisches Laboratorium Schott & Gen was born. Production started in 1886. Original products included optical and thermometer glasses. The following year, a crucial discovery was made: borosilicate, a heat and chemically resistant glass. By it’s 25th year anniversary, the company had grown from an experimental glass factory into an internationally renowned manufacturer of optical and industrial glasses. Soon to be added was fiolax, tube-shaped glass used for vials, ampoules and syringes thus allowing the company to play a significant role in supplying Europe's nascent pharmaceutical industry. Post WW2 USA Army opens new factory in Mainz, West Germany and factory in Jena , East Germany taken over by the DDR State both using same trade name. Legal action for 30 years resolved in 1980 - split name. Berlin Wall 1989, Factories reunited 1991A pharmaceutical clear glass beaker with graduation 100ml -300ml DURAN 50Front : DURAN 50 / SCHOTT & GEN / MAINZ / JENA (ER) GLAS 300 Back : PYREX 300pharmacy, medications, medicines, glass manufacturing, glass works, early settlers, moorabbin, bentleigh, cheltenham, jenaer glaswerk schott & gen company, west germany, east germany, berlin wall, ww2 1939-45, schott otto, zeiss roderich

This amphora or jug, with a silhouette shaped like a woman with hands on hips wearing a long flared-out skirt. The design was used in ancient Greece for pottery storage jars, the neck being narrower than the body. The amphora was discovered by Joe O'Keeffe in 1934 in a sand blowout west of Levy's Point west of Warrnambool while he was planting marram grass for Mr Duncan. An article in the Warrnambool Standard newspaper of December 21, 1985, states that the amphora may be linked to the wooden sailing ship called the Mahogany Ship (also called the Ancient Wreck). Thermoluminescence testing indicates the relic was made in the mid-to-late 1800s and experts suggest it was of North African origin. The presence of the amphora in the sand dunes, and the amphora itself, are still a mystery. The amphora was donated to Flagstaff Hill on a long-term loan by the Duncan family and displayed to the public for the first time on December 21, 1985, until February 2023 when the display was returned to storage to rest with the redevelopment of the Assistant Lighthouse Keepers Cottage (Shipwreck Museum). An extensive search for members of the Duncan Family has been undertaken by Flagstaff Hill and stakeholders to resolve the loan term loan, but the family is not known. As such to properly care for the amphora, it has been registered until ownership can be determined.The object is significant for its possible link to one of Victoria’s and Australia’s maritime mysteries, the Mahogany Ship (also known as the Ancient Wreck). It is one of very few known relics that could give evidence of the existence and history of the vessel. It is listed on the Victorian Heritage Register S438 as it is one of Victoria’s oldest recorded shipwrecks. The identity of the vessel has the potential to change Australia’s history.Amphora or jug; earthenware, orange clay with areas of cream. The vessel has a wide mouth, a deep lip, two opposing handles between the neck and shoulder, and a bulbous body. The curved handles have a design of six bands between them. There are three rings of small dots encircling the body. The underside has concentric circles in the clay, uneven edge and pinhole markings. Pinhole patterns: [3 holes above 3 holes] opposite [3 holes above 3 holes], 1 hole] [ 1 hole above 2 holes]flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, amphora, jug, mahogany ship, ancient wreck, joe o'keefe, duncan, thermoluminescence, north africa, levy point, pottery, storage jar

This model of a mechanical ore roasting and chloridising furnace was invented and patented by Thomas Edwards of the Edwards Pyrites Smelting and Ore Reduction Company. This new type of furnace produced a high standard of sulphur free ore known as ‘sweet roasted’. Edwards used this model for demonstrations in the USA. Of note is the central large vertical cogwheel (externally driven) which drives small vertical cogwheels via angled cogging drives. These in turn drive a horizontal wheel. Each side of the vertical wheel is set on an opposite side to the horizontal wheel of its neighbours, resulting in opposite direction rotation of neighbouring horizontal wheels. Each horizontal wheel turns a rabble (set of vertical iron paddles) within the furnace. These rabbles, each turning in opposite direction to its neighbours, move the roasting ore in a zig-zag path through the furnace. The elongated furnace with its line of rabbles produced a much ‘sweeter’ roasted ore than could be obtained from a typical tank-shaped furnace. In 1924, when the model was donated to the Ballarat School of Mines, Ballarat’s Courier newspaper reported, ‘Apart from its historical and education value, the gift should serve to stimulate the inventive faculties of the students who have to win fame for the school and for themselves in the metallurgical world.’ The furnace model was donated to Ballarat School of Mines and used as an educational prop from 1924. The model relates to the mining industry which is a significant part of Ballarat's history and heritage. Ballarat School of Mines is the oldest Technical School in Australia and is celebrating 150 years in 2020.Metal model of Edwards' Ore Reduction Furnace. The model includes cogwheels, rabbles and other details. Scale is thought to be around 1:20M259ballarat school of mines, edwards, pyrites, ore reducation, edward retallack, mining, model

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Double ring collar blob finish on neck; upper is wide and rounded, lower is a thin ring. Diagonal lines in glass on neck, low shoulder mould seam, rippled texture around body. Push-up base with pontil mark, rectangular impression in heel. Uneven base. Sediment on inside surfaces.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck and shoulder. Low shoulder mould seam. Body is matt and tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark. Uneven base. Bubble on top of lip. Sediment on inside surfaces. White rubbing line and scratches on outside. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck and shoulder. Low shoulder mould seam. Body is matt with ripples in glass, tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark, visible through glass. Marks on heel. Uneven base. Bubble on side and top of lip. Sediment on inside surfaces. Two score lines, one half way down body, one near base. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Rough applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck. Low shoulder mould seam. Body is matt, tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark, visible through glass. Marks on heel, glass thickness varies. Uneven base. Bubble in glass. Sediment on inside surfaces. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

File sizes Review ideal file sizes for photos http://www.tennishistory.com.au/equipment/vintage-racquets/racquet-retailing.html Extract - Born in Bendigo in 1905, Albert Brewer came to Melbourne in 1920 to commence work as a furniture factory machinist at Rojos Pty.Ltd. in Little Lonsdale Street Melbourne . http://en.wikipedia.org/wiki/Catgut Catgut is a type of cord[1] that is prepared from the natural fiber in the walls of animal intestines.[2] Usually sheep or goat intestines are used, but it is occasionally made from the intestines of a hog, horse, mule, pig or donkey. The name neither implies nor derives from any association with cats. The word catgut may have been an abbreviation of the word "cattlegut". Alternatively, it may have derived by folk etymology from kitgut or kitstring -- the word kit, meaning fiddle, having at some point been confused with the word kit for little cat. According to legend, string makers of the 17th century deliberately misled people to believe that the strings were made of cat intestines in order to protect their industry, as any association with cats was superstitiously believed to be extremely bad luck, and to be avoided at all costRacket or Racqet. A teardrop shaped wooden frame with tight interlaced network of strings. The strings are made of Cat-gut, several are broken. See narrative on Cat gut.The racket is branded Colt at the base of the tear drop and Designed for Young Players. Made by Brewer Australia. Maker of the Worlds famous style,is printed on the handle on both sides. The frame is made of laminated wood. The paint is in poor condition.The racket has a leather grip, the grip is is worn and stained. .Powerhouse Museum Collection Thesaurus Light bats consisting of a network of cord or nylon stretched in an elliptical frame, used chiefly in playing ball games like tennis, badminton, etc.Colt. Made by Brewers Australia. Maker of the Worlds Famous style leader. Designed for young playersball, sport, leather, game, racquet, racket, colt, cat gut, strings, young players, brewer, handle, grip

The only information available on this plate is what is written on the base. No other information has been found on Mrs Playford or Thomas and Mary Annerley. Perhaps the plate came to into the collection of the Warrnambool and District Historical Society via the old Warrnambool Museum. The plate has no known local provenance and is kept because of its age and interesting monogram. This is a circular-shaped china plate (probably a dinner plate) with a fluted edge. The edging of the plate has red and gold ornamentation with garlands of flowers in green, pink, mauve and orange. There are four posies of flowers around the bowl of the plate in the same colouring with the addition of blue. In the centre of the plate is a large gold monogram – ‘T.M.A.’ On the base of the plate is a piece of paper partly torn off giving some details of the history of the plate in handwriting. This paper is pasted on to the base of the plate obscuring any maker’s mark that there may be. The plate has been broken into four pieces and stuck together again using five metal clips. There are some chips around the edge of the plate. Monogram: ‘T.M.A.’ ) (Thomas and Mary Annerley) Note on base: ‘… … the property of Mrs Playford of … St. Brighton (and formerly belonged to her great grandmother). Mrs Playford died in her 91st year and left it with some other pieces of the service to William Rodgers of Wellington St., St. Kilda. Monogram, T.M.A, Thomas & Mary Annerley. Copy of signed statement, 1909’ mrs playford, thomas and mary annerley

The maker of this cruet set is unknown. It is a high quality household item and would have been a common item in households of the more affluent homes in the 19th and early 20th centuries. Cruet sets are not used much these days but have usually been replaced by salt and pepper shakers without a stand. This cruet set has no known local provenance but is retained as an example of a household item of the past. It will be useful for display This cruet set consists of a stand, a container for mustard and two containers for salt and pepper. The stand is silver-plated and has a rectangular base with pointed edges and three slots for the containers, one rectangular and the other two square in shape. The handle is riveted to the base with two screws which are now rusty. The base of the stand also has six studs. The silver plating is tarnished in places. The salt and pepper containers are made of cut glass in rectangular shapes and have silver-plated circular-shaped lids. The top of one of the lids has broken loose from the lid. The mustard container is made of cut glass and is rectangular in shape. The silver plating on the lids is wearing away. history of warrnambool, 19th century household items, cruet set

Girl Guides Service Badge. The green felt at the back of the badge indicates it was a Girl Guides badge - (brown felt indicating a Brownies badge). The number 2 indicates the owner was in her 2nd year as a member of the Girl Guide Club.Historical: Provenance: The Davies family lived at Tawonga in the Kiewa Valley. The badge indicates that a member of the family was a member in her second year of Girl Guides - Wilma who was heavily involved in the Girl Guide movement or her daughter, Kerrie who was a member of the Girl Guides.A Girl Guide Service Badge. Brass star shaped with 6 points. Half of each point has 2 embossed lines from centre circle towards the point. In the centre is a circle coloured black at the centre of which is a brass number 2. The 2 stands out from the rest as it is raised from the flat circle which in turn is raised from the points which taper down to what would be a flat base but the badge is hollow. At the back of the star is a brass loop to which is attached a hair clip like pin - with a straight edge and a bumpy edge.(split pin attachment) A green felt circular pad with a central hole is attached.The 2 embossed lines on each half of each point of the star. The number 2 in the black circle. badge. star badge. numismatics. equipment. rank. pip. kiewa valley. tas davies., girl guides. wilma davies. kerrie davies. tawonga

This fish dish is an attractive household item which would have been used in the early to mid 20th century when the more affluent families in society were entertaining. It is not a common item and most likely would not be seen in households today. This dish has no known local provenance but is of considerable interest as a household item not seen today. It will be useful for display.This fish dish has an electro-plated nickel silver holder with two curved pieces of metal joined at the centre to form a base. There are four round metal balls at each end of the curved metal to stabilise the stand. Four curved metal pieces are attached to the base and hold a rectangular-shaped piece of metal and a handle. Fitting into this piece of metal is a cut glass container which is heavily patterned on the sides and base. The lid of this container is rectangular with rounded edges and silver-plated. The top of the lid has a silver-coloured free-standing fish model attached to the lid by a metal stud. The fish is a little loose on its stand. The handle can be folded down. ‘E P N S 62’ household items, history of warrnambool

This hat is one worn by members of the Boy Scouts. Warrnambool today has two Boy Scout groups and Allansford has one. The Warrnambool Tooram group has halls at the corner of Banyan and Timor Streets and in Otway Road and the Warrnambool Norfolk group has its headquarters at the corner of Kepler Street and Raglan Parade. This hat is of interest as an example of the hat worn by scouts in Warrnambool in the 20th century. The same type of hat is still worn by Boy Scouts today. This is a khaki felt hat with a wide brim The crown is folded in 4 sections with four eyelets. There is a brown leather band around the crown and a silver-coloured buckle and two silver studs. The band is adjustable and a piece of string with a knot is used for adjusting the chin strap and for hanging the hat on a peg. The chin strap is made of plaited leather and the inside is slightly stained. The hat is slotted into a wooden frame made of varnished plyboard. The frame is U shaped with two straight sides. A smaller added section of plyboard has been placed on top of the frame and this has an opening at the top to allow the hat brim to slot into the frame. This frame appears to be home-made. scouting in warrnambool, history of warrnambool