Edward John Barker, O.A.M, Ballarat School of Mines Principal 1964-1976, Ballarat School of Mines Council President 1991 - Kenneth Joynson Flecknoe, Ballarat School of Mines Council President 1981-1988 Albert Whitelock Steane, Ballarat Junior Technical School Foundation Headmaster 1913-1942Invitation and Programme for the Official Opening of the Flecknoe Building, Barker Building and Steane Building printed on buff card with maroon ink. The card includes the order of ceremony, and included introductory remarks by Bill Gribble; official opening and naming by the Honourable Joan Kirner, A.M., M.P., Premier of Victorian; and Peter Shiells, Director of the Ballarat School of Mines. ballarat school of mines, e.j. barker, ken flecknoe, flecknoe, albert w. steane, steane, flecknoe building, barker building, steane building, peter shiells, joan kirner, bill gribble

This image was taken at the conclusion of a special eight week "Crash course" in mining, requested by Eastern Reefs. It was used in the Ballarat School of Mines Review, 1988, page 7.Black and white image of three men standing behind a trolley in a mine tunnel showing supporting beams (thought to be Sovereign Hill) They are from left to right Ernie Terrill (Ballarat CES), Raymond Collins (Ballarat School of Mines Mining Student) and Malcolm Vallance (Ballarat School of Mines Special Projects Manager).ballarat school of mines, mines, mining, mining trolley, mine truck, mining railway, malcolm vallance, mal vallance, raymond collins, ernie terrill, eastern reefs, sovereign hill, mining education

Thelma Rungkat was Head of the Librarianship Department at Ballarat College of Advanced Education, and by 1990 she was Head of Information Management. Keith Davidson retired from his role as Senior Lecturer in Librarianship at Ballarat College of Advanced Education in 1988..1) Thelma Rungkat with Graduate Diploma of Librarianship students Ninis A. Damataru and Neneng Komareah at the graduates Farewell dinner for Graduate Diploma of Librarianship students, 1987 .2) Thelma Rungkat with Graduate Diploma of Librarianship students Sri Wahyuni Soeriptito and Tetty Sartika at the South East Asian Librarian Congress, Jakarta, Indonesia, 1990 .3) Thelma Rungkat and Graduate Librarianship Graduate Neneng Komarich at Ballarat College of Advanced Education Graduation, 1988 .4) Tim Reddan, lecturer in Information Management receives a farewell gift from Thelma Rungkat at the first annual dinner of Ballarat Librarianship Graduates' Association, 1990 .5) Mrs Shiell, Andrew Shiell and Keith Davison (Senior Lecturer in Librarianship) taken at Tim Reddan's Farewellthelma rungkat, keith davidson, tim reddan, librarianship, library, libriarian, univerrsity women

.4) Left to right: Ray Cottsell (Librarianship lecturer), Tetty Sartika, Sara Wirawar (visiting lecturer, Director of Hasanuddin University Library, Indonesia and Thelma Rungkat (Head of Librianship) at Sovereign Hill, September 1988.ray cottsell, tetty sartika, sara wirawar, thelma rungkat, librarianship, library, sovereign hill

Edith (Alice) WATSON (1914–2010) Murtoa | Australia Alice Watson studied at the Ballarat Technical Art School (at the School of Mines, Ballarat) from 1930 until 1933. Watson sat several departmental exams, including drawing and painting plant forms from nature, lettering, Composition of Form and Colour and advanced General Design, as well as dressmaking and embossed leatherwork. Her folio applies many Australian native floral elements to design. Upon graduating, Watson taught at the Murtoa High School, living with her parents until their deaths in 1972 and 1988 when she was 74 years old. Alice Watson died in Ballarat, aged 95, having conserved her beautiful student folio, which was generously gifted to the Federation University permanent Historical Collection by the Watson family.A series of drawings undertaken by Alice Watson when she was studying "Drawing From the Plaster Cast" at the Ballarat Technical Art School. Some drawings are double sided.plaster casts, drawing, ballarat technical art school, alice watson, edith alice watson, alumni, visual arts

Edith (Alice) WATSON (1914–2010) Murtoa | Australia Alice Watson studied at the Ballarat Technical Art School (at the School of Mines, Ballarat) from 1930 until 1933. Watson sat several departmental exams, including drawing and painting plant forms from nature, lettering, Composition of Form and Colour and advanced General Design, as well as dressmaking and embossed leatherwork. General Design examinations required only designs on paper, and not the full execution of an object (which was the case for Applied Design exams). Watson's folio applies many Australian native floral elements to design. Upon graduating, Watson taught at the Murtoa High School, living with her parents until their deaths in 1972 and 1988 when she was 74 years old. Alice Watson died in Ballarat, aged 95, having conserved her beautiful student folio, which was generously gifted to the Federation University permanent Historical Collection by the Watson family. A folio of thirty three drawings and paintings undertaken by Alice Watson at the Ballarat Technical Art School. The works include including the application of Australian flora to designs, including for pottery, leather and applique. .2) is a design for a table runner to be executed in richelieu work .3) frieze including fish .4) "Design for a border to be executed in stencil". 1932 .12) "Design on the waratah for a bowl to be executed in clay". 1932 .14) "Time test" .12) .17) .15) .18) show the combination of Australian flora with Art Nouveau-inspired designs .9) is a design for a wallet to be executed in raffia showing elevation, side elevation and plan views .11) is a design for a prayer book carrier to be executed in leather work .10) is an example of pencil transfer method of design seen on .11) .18) Design for a fan, image of birds and berries on a blue ground. .25) landscape illustration .27) "development" design based on a correa .29) "Design for a tea cosy based on the Cobia-Scanden to be executed in applique. 1931 (see also .31) .30) "Design for a writing tablet to be executed in embossed leather work and based on the native fuschia" (correa). 1931 .31) a completed doily holder: applique workMost are signed A. Watson 1931 .2) Paper is embossed with stamp of 'Goodall's Bristol Boards' stamp. (Crown depicted in centre) .20 and .22) Paper is embossed with 'Windsor & Newtons Bristol Board' stamp.(Griffin depicted in centre)ballarat technical art school, alice watson, flora, design, artwork, folio, art nouveau, alumni, leather work design, richelieu work, applique, doily holder, doyley holder, general design, edith alice watson

Edith (Alice) WATSON (1914–2010) Murtoa | Australia Alice Watson studied at the Ballarat Technical Art School (at the School of Mines, Ballarat) from 1930 until 1933. These works include commercial art, advertising and catalogue illustrations as well as figure construction and fashion-plate designs. Watson sat several departmental exams, including drawing and painting plant forms from nature, lettering, Composition of Form and Colour and advanced General Design, as well as dressmaking and embossed leatherwork. Her folio applies many Australian native floral elements to design. Upon graduating, Watson taught at the Murtoa High School, living with her parents until their deaths in 1972 and 1988 when she was 74 years old. Alice Watson died in Ballarat, aged 95, having conserved her beautiful student folio, which was generously gifted to the Federation University permanent Historical Collection by the Watson family. Commercial artA folio of Fashion Drawing by Edith Alice Watson of the Ballarat Technical Art School. .1) Two women dressed in fashionable clothing- lhs tan ensemble and hat; rhs fuschia ensemble with black and white accessories plus fur stole. Signed lrs A.Watson. 1933. .26) The image with three women wearing a hats. This appears to be an example of ticket writing. Signed lrs "A Watson- 2nd term. 1932." .35) The image with a woman wearing a hat appears to be an example of ticket writing. Signed lrs "A Watson--11th-7-32." .23) female figure drawing. Signed lrs A.Watson. 1st Term. 1932 .21) female figure drawing. Signed lrs A.Watson. 2nd Term. 1932 .17) drawing of lips, side view. Signed lrs A. Watson. 1931 .18) drawing of lips,three-quarter view. Signed lrs A. Watson .37) Paper is embossed with 'Windsor & Newtons Bristol Board' stamp.(Griffin depicted in centre)alice watson, ballarat technical art school, art, drawing, figure drawing, alumni, costume drawing, fashion drawing, ticket writing, 1930's fashion, indian ink, edith alice watson, figure construction, advertising, commercial art

The Ballarat School of Mines opened to students in 1870, making it the first School of Mines in Australia. Ballarat School of Mines Council President, Bill Gribble, studied Art at Ballarat School of Mines Technical Art School. In 1956 he was working with Villiers Engineering, then Bendex Mintex in 1966. He retired from there in 1988 as Chairman and Managing Director. In 1989 Bill Gribble was appointed to the Ballarat School of Mines Council. He served as President from 1992 until his retirement in 1996. In that year the Ballarat Technical Art School building was named the W.J. Gribble building. Two colour photographs of the cutting the Ballarat School of Mines 125th Anniversary Cake. Principal Ron Wild is in the centre, with Council President Bill Gribble on the right. The photo was taken in the Amenities building at the Ballarat School of Mines. ballarat school of mines, anniversary, 125th anniversary, ron wild, bill gribble, gribble, ballarat school of mines, anniversary, 125th anniversary, ron wild, bill gribble, gribble

The Ballarat School of Mines opened to students in 1870, making it the first School of Mines in Australia. Ballarat School of Mines Council President, Bill Gribble, studied Art at Ballarat School of Mines Technical Art School. In 1956 he was working with Villiers Engineering, then Bendex Mintex in 1966. He retired from there in 1988 as Chairman and Managing Director. In 1989 Bill Gribble was appointed to the Ballarat School of Mines Council. He served as President from 1992 until his retirement in 1996. In that year the Ballarat Technical Art School building was named the W.J. Gribble building. A colour photograph of Bill Gribble making a speech in the Library Courtyard at the Ballarat School of Mines. Vern Robson is on the left and Principal Ron Wild is in the centre.ballarat school of mines, gribble, bill gribble, ron wild, vern robson, robson, ballarat school of mines, gribble, bill gribble, ron wild, vern robson, robson

Paul Keating laid a stone at the Ballarat School of Mines on 25 October 1995 on the 125th anniversary of the Ballarat School of Mines. Ballarat School of Mines Council President, Bill Gribble, studied Art at Ballarat School of Mines Technical Art School. In 1956 he was working with Villiers Engineering, then Bendex Mintex in 1966. He retired from there in 1988 as Chairman and Managing Director. In 1989 Bill Gribble was appointed to the Ballarat School of Mines Council. He served as President from 1992 until his retirement in 1996. In that year the Ballarat Technical Art School building was named the W.J. Gribble building. Colour photograph of three men in a courtyard of the Ballarat School of Mines. They are from left, Ron Wild (Principal), Prime Minister Paul Keating, Bill Gribble (SMB Council President)ballarat school of mines, paul keating, prime minister, bill gribble, gribble, ron wild, anniversary, 125th anniversary., ballarat school of mines, paul keating, prime minister, bill gribble, gribble, ron wild, anniversary, 125th anniversary.

Ballarat School of Mines Council President, Bill Gribble, studied Art at Ballarat School of Mines Technical Art School. In 1956 he was working with Villiers Engineering, then Bendex Mintex in 1966. He retired from there in 1988 as Chairman and Managing Director. In 1989 Bill Gribble was appointed to the Ballarat School of Mines Council. He served as President from 1992 until his retirement in 1996. In that year the Ballarat Technical Art School building was named the W.J. Gribble building.Two black and white photographs of Bill Gribble in Founders Room at the Ballarat School of Mines.ballarat school of mines, ballarat school of mine council, bill gribble, gribble, founders room

Ballarat School of Mines Council President, Bill Gribble, studied Art at Ballarat School of Mines Technical Art School. In 1956 he was working with Villiers Engineering, then Bendex Mintex in 1966. He retired from there in 1988 as Chairman and Managing Director. In 1989 Bill Gribble was appointed to the Ballarat School of Mines Council. He served as President from 1992 until his retirement in 1996. In that year the Ballarat Technical Art School building was named the W.J. Gribble building..1) Portrait of Bill Gribble, President of the Ballarat School of Mines Council .2) Presentation to ill Gribble on his retirement from the Ballarat School of Mines CouncilThe presentation states: "The Council expresses its deep appreciation of the outstanding contribution of William James gribble. During your time as a member of the Council from 1988 and as President from 1992 until 1996 the Institute experienced a significant expansion in progress, enrolments and facilities, faced many challenges and achieved great success. Your dedication , commitment and loyalty to the institute is acknowledge. The vigorous leadership you provided as President of Council ensured the continued development of the Institute as an outstanding provider of technical and further education well placed to face challenges ahead. The Council, Staff and Students wish you well for the future and thank you for your devotion to the good governance of the institute."bill gribble, gribble, w.j. gribble, ballarat school of mines, ballarat school of mines council

This pump is an Ajax Type L2 Series A model, made and sold by McPherson’s Pty Ltd of Melbourne circa 1930’s to 1940’s, is a mechanical, hand operated, constant flow pressure pump. It would have been used to pump fluids from one area to another, for example from a dam to a tank or used as a bilge pump on a small vessel, mounted on the vessel’s bulkhead, floor or deck. This type of hand pump is sometimes called a ‘Reciprocating Suction Pump’. It has a mechanical pumping action of the lever moves the piston inside the pump up and down. The water is lifted from below the pump through the inlet pipe and into the pump’s cylinder. This action causes the lower valve to close and the piston’s valve opens and the pressure within the pump forces the water out of the pump through the exit pipe. The limitation of this type of pump is that it can only raise the water a maximum of about 7 metres from beneath the ground and yields 24-26 Litres per minute. This type of pump could be used for many purposes such as pumping water or fuel. McPherson’s 1940’s advertisement proclaims “For all jobs on the land – irrigation, spraying, tank, plumbing, fire-fighting – there’s a suitable “Ajax” pump. Send us the details of you pumping problem. Our Expert’s advice will help you choose the right pump – the one that will give you most years of PROFITABLE PUMPING.” (The Australasian (Melbourne) Sat. 26th October 1940.) McPherson’s Pty Ltd, the manufacturer, advertised a similar pump to this one in The Australasian (Melbourne) in 1936, calling it the Ajax Double Acting Hand Pump. In 1942 another advertisement advised that a representative for a fire-fighting equipment supplier was visiting the western district of Victoria. The company could now supply double-action two-spray Ajax pumps at lower prices than similar pumps the district had recently purchased from Adelaide. McPHERSON’S FOUNDER and COMPANY TIMELINE 1860 – Thomas McPherson, a Scottish immigrant (c. 1853 ), founded McPherson’s in Melbourne, supplying pig iron (lead ingots imported as ballast in ships) to local manufacturers. 1882 – Thomas McPherson established a warehouse in Collins St Melbourne and included tools, steam fittings and machinery in his wares. The business expanded to include steam saw mills and became known as Thomas McPherson and Sons (William Murray and Edward). 1888 – Thomas passed away and his sons inherited the business. In 1896 William Murray became the sole proprietor after his brother Edward’s death. 1900 – The firm expanded, establishing Acme Bolt Company to manufacture nuts and bolts. 1912 – McPhersons Pty Ltd established a machinery warehouse and showroom in 554-556 Collins St Melbourne. McPherson’s went on to establish branches in Sydney (1911), Adelaide (1921) and Perth (1930) 1917 - McPherson’s supplied ‘dog spikes’ for the transcontinental railway, running from Eastern to Western Australia. 1918 – A tool works set up in Kensington, Melbourne, manufacturing Macson lathes and made machine tools that previously had to be imported. 1924 – The Bolt Works was transferred to a new building in Melbourne. McPhersons began making pumps. 1929 – McPherson retired. His son (Sir) William Edward McPherson (known as ‘WE’), was born in Hawthorne, Melbourne, in 1898. After his education he began work in his father’s Melbourne hardware and machinery business He took over as governing director when his father retired. 1929-1932 – McPherson’s supplied thousands of tons of rivets from its Richmond (Melbourne) Bolt Works for the construction of the Sydney Harbour Bridge. 1936 – McPherson’s Pty Ltd is advertising Ajax Pumps in newspapers 1934 – McPhersons purchased the property adjoining the warehouse in Collins Street, and during 1935-1936 built a new office and showrooms on the site of 546-445 Collins St. 1939 - McPherson’s acquired the Tool Equipment Co. Pty. Ltd and Associated Machine Tools Australia Pty Ltd was formed to separate McPherson’s machine-tool manufacturing and merchandising interests. 1939 – Ajax Pump Works, a foundry and pump manufacturing plant, was established in Tottenham, Melbourne, and the Ajax Bolt and Rivet Co Pty Ltd began manufacturing in New Zealand. 1944 - McPherson’s became a public company, McPherson’s Ltd. 1948 - The Ajax Pump Foundry opened at Kyneton, Victoria and in the post war years it grew to became a large manufacturer. 1980’s – Ajax Pumps brochure lists the address as 6 Buckhurst St, South Melbourne, Vic 3205 with the Telephone number 03 669 3588 1988 - Ajax Pumps acquired the Forrers Company, which was established in 1921. Manufacturing in Ipswich, Queensland, specialising in submersible sewage pumps. 1991 – KSB Ajax was formed, bringing together the companies KSB and Ajax Pumps 1993 – Manufacturing was moved to state-of-the-art premises in Tottenham, Victoria 2001 - The Forrers facility was moved to Tottenham. 2007 - Company name KSB Ajax Pumps was changed to KSB Australia Pty Ltd. 2009 - KSB Australia opened a branch in Townsville, Queensland. 2011 - KSB Australia moved to its dedicated Water and Waste Water Competence Centre in Bundamba, Queensland. DISPLAY OF THIS AJAX PUMP This pump was installed at Flagstaff Hill Maritime Village as part of a working display in the village by the Friends of Flagstaff Hill, in acknowledgement of the dedicated involvement of one of its long serving members, Bob Crossman. The display was officially opened 31st March 2018 and incorporates a restored Furphy Tank and Water Pipe Stand. The pump is used to draw water from the lake, through the water stand pipe and into the reconditioned Furphy Tank. This Ajax pump made by McPherson’s Pty Ltd is significant for its association with McPherson’s, a prominent manufacturer of hardware in Victoria. McPherson’s is famous for supplying ‘dog-spikes’ for the transcontinental railway (eastern to western Australia, 1917) and rivets for the Sydney Harbour Bridge (1929-1932). The Ajax pump is also of significance because of its association with McPherson’s Governing Director (Sir) William McPherson, former premier and treasurer in Victoria 1928-1929. The former McPherson’s Pty Ltd building in Collins Street Melbourne is now on the Victorian Heritage Register VHR H0942 This pump is representative of mechanical pumps popular in the early to mid-1900’s and still used today. Hand operated pressure pump, double acting. Cast metal case, painted red, with steel hose attachments and long metal lever. Pump is bolted to wooden plank. Model of pump is AJAX, Type L2, Series A pump. Embossed on lower section of pump "L2 - 10", "L2 - -1", "AJAX" “(?) –2-1” Embossed on lower handle “3-7” “L – 4” Embossed on attached plate “FOR SPARE PARTS / TYPE L2 / SERIES A / PUMP ASSEMBLED BY T R” Manufactured by McPherson’s Pty Ltd of Melbourne circa 1930’s - 1940’s.flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ajax pump works tottenham melbourne, ajax pump factory kyneton, william edward mcpherson, thomas mcpherson of melbourne, mcpherson’s pty ltd melbourne, acme bolt company, tool equipment co. pty. ltd, associated machine tools australia pty ltd, ajax bolt and rivet co. pty ltd new zealand, forrers company ipswich queensland, ksb ajax pumps, ksb australia pty ltd, macson lathes, tool manufacturer early to mid- 20th century, ajax double acting hand pump, ajax type l2 series a pump, qisjax pumps, water pump 1940’s, fuel pump 1940’s, hand operated constant flow pressure pump, reciprocating suction pump, agricultural hand pump, plumber’s hand pump, portable hand pump

.1) These capes were worn by student nurses when going on and off duty, when called to see the Matron or senior nurse (but never worn on duty). They were made of unlined woollen fabric and were wrist length and worn by Alfred Hospital student nurses until 1992.This nurses cape was made before 1970 as Ball & Welch Ltd was bought out in 1970. .2) RANF was between 1971-1988. In October 1975 the Royal Victorian College of Nurses amalgamated with the RANF Employees' Section and became the new Royal Australian Nursing Federation. .1) Machine stitched light blue pure wool cape with stitched down shoulder epaulettes. Around the neckline is stitched cotton bias binding which is hemmed by hand. Hook and eye fastening. .2) Badge pinned to left hand front Badge - Student Nurse Unit R.A.N.F.nursing, alfred hospital, student nurse cape, woollen cape, royal australian nursing federation, ranf, badge, ball and welch, costume, textiles

Edith (Alice) WATSON (1914–2010) Murtoa | Australia Alice Watson studied at the Ballarat Technical Art School (at the School of Mines, Ballarat) from 1930 until 1933. Watson sat several departmental exams, including drawing and painting plant forms from nature, lettering, Composition of Form and Colour and advanced General Design, as well as dressmaking and embossed leatherwork. Her folio applies many Australian native floral elements to design. Upon graduating, Watson taught at the Murtoa High School, living with her parents until their deaths in 1972 and 1988 when she was 74 years old. Alice Watson died in Ballarat, aged 95, having conserved her beautiful student folio, which was generously gifted to the Federation University permanent Historical Collection by the Watson family. commercial artSeven paintings undertaken by Edith Alice (Alice) Watson at the Ballarat Technical Art School, a division of the Ballarat School of Mines. ballarat technical art school, edith alice watson, ornament, flora, alumni, composition, composition of form and colour, general design, australian flora, light and shade, commercial art

Laminated colour photograph mounted on card. Students' names printed under photograph

black ink on orange cardballarat institute of advanced education, ken clements, academic registrar, founders hall, bi-centennary, bi-centenary logo

Federation University Australia was established on 1 January 2014. Formerly known as the University of Ballarat, its enabling legislation was the University of Ballarat Amendment (Federation University Australia) Act 2013. On 1 January 2014, the University of Ballarat amalgamated with the Monash University Gippsland Campus to form Federation University Australia. The Gippsland Campus also had a long lineage dating back to 1928 with the establishment of the Yallourn Technical School which became a predecessor institution to the Gippsland College of Advanced Education formed in 1968. In 1990, it was renamed the Monash University College and in 1993 became the Gippsland Campus of Monash University. In 2016, Federation University Australia announced plans to take possession, over a two-year period, of Monash’s Berwick Campus in the south-east corridor of Melbourne. Federation University Australia, or FedUni, is headquartered in Ballarat and offers programs in Higher Education and Vocational Education and Training to regional Victoria and beyond. The University’s commitment to educational and social equity, teaching excellence, research distinction, environmental sustainability and regional capacity building has enabled it to develop in a way that draws on its proud heritage to inform its future. Its regional character sets a framework for the University’s priorities but does not constrain it from serving wider community interests, nationally and internationally. The name Federation University Australia was chosen to convey the scope and capacity of an expanded regional university with a federated network of campuses. Three photographs showing a tree planted as a memorial to Jock Lawson, and a memorial plaque. The memorial is located on the Federation University Gippsland Campus, Churchill.This memorial was erected as a tribute to Mr Jock Lawson BEM (1901-1988) for his valuable contribution to the landscape design of the Gippsland Institute of Advanced Education. Mr Lawson's expert guidance set the basis for the fine gardens in which the Institute Community takes pride. gippsland institute of advanced education, churchill, garden, jock lawson, gippsland campus, memorial

Newsclip on the ANZAC veterans from Ballarat.anzac, world war one, 18th australian army service corps, sydney rawlings, john brazenor, les sim, gordon spittle, harry holmes, arch gilbert, bob bradby, jack reid, joe fawcett, jack maas, chatham-holmes family collection, john atkinson, arthur oxbrow, ray vickery, tim eustace, dick redfern, world war 1, aif

Collection of photographs and articles telling the history of Ballarat from the 1800sNewspaper - tabloid1838 pastoral period, first settlers, anderson family, ballarat pioneers, aborigines, goldfields, eureka, school of mines, technical school, ballarat clubs, victorian city

Kenneth Flecknoe was president of the Ballarat School of MInes School Council. He was a member of the Council from 1975 to 1988. He was the President from 1981 to 1988.Framed coloured photograph on canvas of Kenneth Flecknoe in a suitBrass plaque attached to frame: "Kenneth Joynson Flecknoe Member SMB Council 1975-1988 President 1981-1988"president, ballarat school of mines, kenneth flecknoe

William Gribble was president of the Ballarat School of MInes School Council. He was a member of the Council from 1988 to 1996. He was the President from 1996 to 1996.Framed coloured photograph on canvas of William James Gribble in a suitBrass plaque attached to frame: "William James Gribble Member SMB Council 1988-1996 President 1992-1996"president, ballarat school of mines, school council, william gribble