A PK-15 tennis racquet with open throat and handle wrapped with leather. Vinyl strings & plastic butt cap. Handle wrapped in plastic packaging wrap. Adhesive label on wrap marked with: 'L.RANGE PK-15...80C/20F'. Reinforcement strip along crown. Materials: Graphite, Leather, Vinyl, Ink, Adhesive tape, Adhesive label, Plastictennis

A Spalding '"Pancho" Gonzales Autograph' tennis racquet, featuring: brown/black with gold, perforated leather handle grips; Wilson 'Championship' nylon netting; ribbon whipping around shoulders and shaft; and original plastic handle grip cover. Materials: Wood, Adhesive tape, Leather, Paint, Ink, Ribbon, Vinyl, Lacquer, Glue, Metal, Nylon, Plastictennis

See picture of family history.Wooden dressing table with mirror, on castors, with two large drawers, and two smaller drawers at side of mirror. An inlaid decorative design, and brass handles on drawers. Wooden side table with one door with a brass handle, and an inlaid decorative design. The chamber pot would be stored on a shelf in this cupboard. These two pieces are part of a 4 piece bedroom suite.side tables, night cupboards, bedroom suites

A pair of vintage handmade blacksmith tongs with two handles called reins, which are riveted together to form a hinge joint for the long 90 degree right angled flat edged tongs. The blacksmith opens and closes the tongs using the handles. They are made of flat mild steel. They were used for holding steel in position and turning it over during forging operations.blacksmithing tools, forging tools, metalworking tools, furnace tools, tools

Enamel candle holders with a candle were used for light prior to gas and electricity. The candles were held in a circular holder to catch the drips of candle wax. An atttached finger holder was added for carrying.Three quite damaged enamelled metal candlestick holders with a plate-shaped base and a small finger handle at the side. In the middle of the base is a metal cylinder to hold a candle. Two are white with a navy blue trim around the rim. One is light blue enamel with a a fluted shaped base and riveted loop handle. A semi-burnt candle is in one holder.candlesticks, candle holders, candlestick holders, candles, light

Iron was heated on top of stove. Often the person ironing had two irons - one to iron with and the other heating on stove ready to use when the other cooled down. They were heavy to use and were generally cleaned with bees' wax and a cloth before use. Wooden handles were patented in 1865.This item is an example of a domestic appliance in common usage before the advent of electricity.Small rusty flat iron.domestic iron flat-iron

A snatch block is a heavy-duty pulley inside a metal casing. It is primarily designed for handling heavy goods, working as a pulley point that can redirect the course of a winch line. Snatch blocks are also used to increase the lifting or pulling capacity of wire hoists and winches. There is no history or manufacturing provenance currently available.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item is believed to have been produced in the first quarter of the 20th century.Snatch block, metal, one sheave, with a large hook that has a hole drilled through its tip.flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, snatch block, metal snatch block, lifting gear, rope pully, marine technology, ship rigging

History of the Mitcham Post Office as related by Brian Millane, grandson of Bertha Markham. He lived on site with his parents and eight siblings until the P.M.G purchased the property in 1957.non-fictionHistory of the Mitcham Post Office. mitcham post office, millane, brian, markham, bertha

A4, 219 pp. Ringbound final report dated 31 August 2015. Describes heritage values of individual places and precincts in the City of Whitehorse.non-fictionCity of Whitehorse Heritage Review 2012 covers Pre-1945 individual heritage places and former precincts previously identified its Heritage Review 2001 but not assessed for inclusion in the Heritage Overlay.heritage review, 2012, city of whitehorse, buildings, coleman architects, historic buildings, memorials, houses, public buildings

Cr William Howieson of the Borough of Kew was also a member of the Kew Bowling Club (1880-1998). The club was located in Wellington Street as part of a complex that included the Kew Recreation Hall. In 1998 the Club merged with Auburn Heights Bowling Club. The trophy has a broken handle and a clear break in the crystal container.This is the earliest example of a trophy deriving from the Kew Bowling Club in our collection. It was awarded to a noted civic figure in local government in Kew. Silver plate and crystal trophy awarded to W Howeison in 1885-6 as the winner of the President's Prize of the Kew Bowling Club."Kew Bowling Club / Presidents Prize / Won by / W Howieson / 1885-6trophies, bowling club trophies, kew bowling club, william howieson

These stirring rods with long handles and base referred to as a dasher were common in the dairy industry. They were made to agitate milk or cream in milk cans and were used on dairy farms and in old creameries. They helped to cool the milk and stop it from separating. They were used on the properties of the Conway and Lemke families in Wodonga.These items are significant as they are representative of tools used in the early dairy industry and were owned by families in Wodonga.Milk / cream stirrers made from steel with a circular blade attached to enable milk to flow through.dairy industry wodonga, dairy tools, dairy machinery

Oscar Picht invented this braille writer in Bromberg, Germany, where he was the Director of the Provincial School for the Blind. Seven keys facilitate the typing of Braille. All in a wooden box with a metal handle on the front and a hook and eye on either. The box looks handmade and was the property of Alfred W Phillips of Ascot Vale in 1934.Steel Brailler, black with gold decorative lines in a wooden box Picht - the makers' name is painted on the front. Alfred W Phillips 1934 Ascotvale - is written above the paper on lid From P M Govett Hartwell - is written on the upper right side of lidassistive devices, braille equipment

The Holden HZ received minor updates to the exterior over the HX series, and saw the introduction of what Holden termed "Radial Tuned Suspension" (RTS) across all models. RTS made significant changes to the suspension of the car, greatly improving the handling finesse, while at the same time not compromising ride qualityAfter 1980, W sized Holden passenger cars were discontinued and replaced by the downsized Commodore4 Door sedan with Flamenco red body and Honey coloured Vinyl roofHolden Lion and Stone badge upper center grille, Premier badge with premier logo front mudguards. Premier badge on boot center with 4.2 liter badge on boot right hand side. Registered number 63463-Hvehicle, hzholden, car

This item was used as a seal (stamp) on official Shire Council documents. The coat of arms of the Shire of Orbost was designed in the form of a cross in which five stars are depicted on a shield. A small crown above the cross indicates the loyalty of the president,councillors and ratepayers to the reigning monarch. The inner section of the shield contains 4 figures, a sheaf of wheat, a factory, a co and a ship - all representing the activities of agriculture, fishing,industry and dairying undertaken in the shire. Originally part of the Bairnsdale district, Orbost split away as part of the Tambo Shire in 1882, and became a shire in its own right as the Shire of Croajingolong on 30th May,1892. The name was changed to the Shire of Orbost on 17th February, 1893. The Orbost Shire Council was abolished on 2nd December, 1994 as part of a state-wide program of local government reform to become part of the newly constituted East Gippsland Shire council.Local governments play an important role in the lives of citizens in Australia. Local government authorities exist to provide services and amenities to local communities, and are also responsible for regulating and providing services for land and property in their district. This item is representative of a time when Orbost had its own Shire Council.The former Orbost Shire Council Seal (stamp) depicting the coat of arms. The circular seal is brass and has a wooden handle with a bulb shaped top.President, Councillors and Ratepayers of the Shire of Orbost-1892orbost orbost-shire-council government history seal

This item is an example of a home-made item used by a rural family. It is made from readily available materials.A hand-made wire toasting fork. It has four prongs and the handle is twisted with a loop at the top for hanging. It is made of two strands of fencing wire.hand-made toasting-fork food-preparation

This is one of many models of the Enterprise Tinned Meat Chopper No5This domestic kitchen appliance is typical of the period when food processing was done at home. It would have been before the time of mass food processing factoriesSmall black metal meat grinder with screw down grip for use on bench tops and tables. Still in working order. Carved wooden handle.Enterprise MFG.Co. PH'A, U.S.A. on clamp. Pat.Jan.30.83.June.5.88 on other side. Enterprise-Tinned-Meat-Chopper on barrel.grinder domestic food-preparation enterprise-mfc

These four stamps are from George Temple's Store which was established in Orbost in 1887. George Temple, born in Yorkshire on 26/2/1832 was of the earliest Orbost storekeepers. Temple's Store was on the corner of Ruskin and Nicholson Streets opposite the post office. He packed stores to the Bendoc area goldfields. The store building eventually became part of Herbert's store when he died in 1917.Four rubber stamps. All have wooden handles. Two have metal seals and two have rubber seals. All seals are circular.temple-george stamps-rubber

Trowel was presented to Captain Spark by honourable secretary Mr Charles Dyte on 1/1/1864 to lay the foundation stone of the watchtower and belfrey of the Ballarat fire station. Trowel was made by Mr. Bennett of Bridge street and fashioned on the trowel used by Mr. Fraser M.L.C. when laying the foundation stone of the St. Kilda town hallhand engraved sterling silver ceremonial trowel. engraving is floral design on blade. handle is hollow, octaganol with leaf pattern and greek meander patternHallmarked on underside - emu, "WE" (letters), kangarooballarat fire brigade, captain, foundation stone, trowel, colonial silversmith, silver trowel, captain spark, honourable secretary, mr bennet, sterling silver, charles dyte, dyte, spark, 1864, watchtower and belfrey, tower, watchtower, belfrey

Gramophone, Edison, in wooden cabinet with hinged lid. Front has open fretwork panel with speaker behind it and is covered by brown cloth. There is a handle for cranking. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, gramophone, music, entertainment, furniture, edison

An Octant is a doubly reflecting navigation instrument used primarily by sailors to measure the angular distance between two visible objects and was a forerunner of the sextant. The name comes from the Latin octo, or “one-eighth of a circle,” for the Octant’s arc which spans 45°, or one-eighth of a circle. The primary use of an Octant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation. The estimation of this angle is known as sighting or shooting the object, or taking a sight. The angle, and the time when it was measured, can be used to calculate a position line on a nautical chart (latitude), for example, sighting the Sun at noon or Polaris at night (in the Northern Hemisphere) gives an angle by which the latitude can then be estimated. Sighting the height of a landmark on land can also give a measure of distance. History: The principle of the Octant as an instrument to measure ones latitude was first implemented around 1742-present but was superseded by the improvement of the octant to a sextant, a very similar instrument, better made and able to measure bigger angles 120°, allowing the measurement of Luna distances to give longitude when used with an accurate chronometer. The sextant started to appear around 1730 and had been attributed to by John Hadley (1682–1744) and Thomas Godfrey (1704–1749), but reference to the sextant was also found later in the unpublished writings of Isaac Newton (1643–1727). Earlier links can be found to Bartholomew Gosnold (1571–1607) indicating that the use of a Sextant for nautical navigation predates Hadley's implementation. In 1922, the sextant was modified for aeronautical navigation by Portuguese navigator and naval officer Gago Coutinho. Henry Hemsley was a lesser-known instrument maker and optician working in London in the late 17th and early 18th century. However, it should be noted that there were two Henry Hemsley opticians and instrument makers around this period. (Henry Hemsley 1, 1786-89, who had premises at 85 Fleet St London and Henry Hemsley 2, 1828-56), whose workshop was at 135-138 Radcliff Highway London. Therefore, based on the inscribed workshop address Henry Hemsley 2 is responsible for making this example.The octant is representative of its type and although not fully complete it demonstrates how 18th and 19th-century mariners determined their latitude on a chart to navigate their way across the world's oceans in the 18th and 19th century. It also demonstrates the skill and workmanship of the early instrument makers that operated from London at this time and provided most of the navigational instrumentation use by commercial and military navies of the time.Octant, ebony wooden frame and handle. Scale is missing from recess in frame. "H. Hemsley 135-138 Ratliff Highway, London", no box"H. Hemsley 135-138 Ratcliff Highway, London"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, navigation, navigational instrument, instrument used for navigation, sextant, henry hemsley, instrument maker, london, octant

Tool used to carry plaster sheets on the ledge at the bottom.A handmade tool used locally.Metal tool with heart shaped handle and spade shaped base with right angled edge on the bottom. Weld join near bottom. Painted in silver. plaster sheet carrier, plaster tool

Perpetual trophy awarded for public speaking the award being named the Neil A Fisher award. It was awarded in the years from 1969-1971. An item with local social and historical links.Round stainless steel tray with lip and wooden handles. Face engraved with names and small blue and gold Jaycee badge glued to one side.Warrnambool Jaycees Oratory Contest. John Mitchell 1969. David Clarke 1970 Trevor Murphy 1971. Neil A Fisher Award all engraved on front face. Ranleigh stamped on back rim.warrnambool jaycees, neil a fisher award, warrnambool history

This medical instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment.Used to hold and manoeuvre the uterus when it was excised and exported in the operation of a hysterectomy. Metal instrument with wide handle at one end and a cork screw at the other.medical instrument. hospital equipment. tawonga. mt beauty. uterus, myomectomy screw.

Weight was used on platform type scale to weigh farm produceImperial weights were used prior to 1966 when decimal currency was introduced. Weights were used in stores selling farm produce prior to packaging.Cast iron weight with a solid base the upper side curved to form two ends which are joined by a cylindrical handle. The ends are embossed on the top.W & T Avery 14 lbweights. scale. farms produce. w & t avery.

This trophy has been awarded in 1940 in a table tennis competition to a sporting team called C.M.I. Nothing is known about this team except that it appears to be one sponsored by a local Warrnambool church. The Warrnambool Table Tennis Association is affiliated with the Victorian Table Tennis Association and has its headquarters in Cramer Street Warrnambool. This cup is of interest as a local Warrnambool sports trophy awarded during World War Two.This is a silver cup mounted on a brown Bakelite base. The cup has two ornamental handles and an inscription on one side of the cup. The silver is somewhat tarnished.‘Reg. No. 15580’ ‘W.T.T.A. Presented to C.M.I. No. 1 Premiers & Champions 1940’ warrnambool table tennis association, history of warrnambool

This cup, made in Melbourne, is a 1946 award for a table tennis competition in the Warrnambool district. The P.C.S.A. may stand for Presbyterian & Congregational Sports Association, with the trophy being won by the Congregational Church team. The donor’s initials, W.Y.M.C., may stand for Warrnambool Young Men’s Club. The Warrnambool Congregational Church was founded in 1862 with a church opened in Liebig Street in 1864. This church was sold and a new one opened in Henna Street in 1940. In 1979, after the Congregational Church merged with the Methodist Church, the Henna Street church was sold to the Salvation Army.This cup is of interest as an example of a Warrnambool sports trophy given over 70 years ago.This is a small silver cup mounted on a brown Bakelite base. The cup has two handles and an inscription on one side of the cup. The silver is a little tarnished.‘E.P.N.S. A1’ ‘Tilbury & Lewis Pty Ltd Lewbury’ ‘P.C.S.A. Table Tennis Congregational Team Premiers & Champions 1946 Donated by W.Y.M.C.’ western district sport, warrnambool table tennis, warrnambool congregational church, history of warrnambool

This trophy is one of several from the 1930s that were awarded as part of the competitions held in Warrnambool by the Inter-Church Indoor Sports Association. One of the sponsors of this competition was Fletcher Jones, the well-known clothing manufacturer who had his head office and main factory in Warrnambool. This trophy was the Bates Cup and it was probably donated by Harold Bates, a property developer who was a Warrnambool City Councillor from 1941 to 1945. This trophy was for the deck quoits competition. The game of quoits consists of competitors throwing four or five rings or hoops on to a raised spike some metres away. The hoops are generally made of plaited rope and the game is said to have been started or popularized by sailors on board ship. In deck quoits the raised spike is usually replaced by concentric circles drawn on the playing surface. This game became very popular on ocean liner cruise ships from the 1920s on. The winner of this trophy is not known.This cup is retained as a fine example of the trophies awarded for indoor sport in the 1930s in Warrnambool by the now-defunct inter church sporting associationThis is an electro plated nickel silver cup with two side handles and a thin stem on a silver base. The cup is mounted on a brown circular Bakelite stand. ‘I.C.I.S.A. Bates Cup Deck Quoits Championship’inter church sporting competitions warrnambool, warrnambool history

This jewellery lathe (minus its rubber belt) came from the Warrnambool jewellery store of Michael Salamy and his son, Edward. The business was in two locations - in Timor Street, opposite the old Post Office, and at 179 Liebig Street. Michael Salamy erected two new buildings at 179 and 181 Liebig Street and the Salamy business was then headed by the son, Edward who was born in 1903 and died in 1977. The jewellery store was closed when Edward retired and Clancey Brothers men's store took over the building at 179 Liebig Street in 1966. Bill Clancey found the jewellery lathe in this building and donated it to the Historical Society. This lathe is of considerable interest as it comes from the prominent 20th century Warrnambool jewellery business of M.Salamy and Son. It is also an interesting memento of a 20th century industrial tool. This is a metal tool with several wheels connected with wing nuts. The large wheel has a wooden handle. A rubber belt connecting two of the wheels is missing. '0865 Panton Maker Glasgow'michael salamy and son, jewelers, warrnambool

This jar is of interest as it is one of the few items we have connected to the early 20th century Warrnambool business of Charles Morris.This is a stone demijohn with a cream-coloured base and body and a brown top. The circular opening is chipped on the edge and has no stopper. The side handle is broken off. C.W. Morris Warrnambool charles morris store, warrnambool, history of warrnambool

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Instrument used to determine the humidity in a location. Made in England by Brannan. Established in 1913, Brannan are a global manufacturer of thermometers, pressure gauges & associated instrumentation productsBrown leather case with brass clip. Wooden frame with thermometer tubes. Black handle used to swing meter around. Gauge for temperature scale Made in England. Brannanviosh, victorian institute of occupational safety and health, brannan, england, thermometers, pressure gauges, humidity hydrometer