Originally this six part teaching model was used and owned by the former Queen Victoria Womens' Hospital, Lonsdale/ Swanston Streets, Melbourne. With the amalgamation of hospitals, the models were transferred to the Monash Medical Centre, Clayton.Foetus, head fully emerged. Painted plaster. The birth process in six stages; fourth of six models.teaching aid, obstetric delivery

Originally this six part teaching model was used and owned by the former Queen Victoria Womens' Hospital, Lonsdale/ Swanston Streets, Melbourne. With the amalgamation of hospitals, the models were transferred to the Monash Medical Centre, Clayton.Placenta with attached umbilical cord, uterus still enlarged. Painted plaster. The birth process in six stages; fifth of six models.teaching aid, obstetric delivery

Originally this six part teaching model was used and owned by the former Queen Victoria Womens' Hospital, Lonsdale/ Swanston Streets, Melbourne. With the amalgamation of hospitals, the models were transferred to the Monash Medical Centre, Clayton.Placenta with attached umbilical cord, uterus smaller, cervix more contracted. [end of series]. Painted plaster. The birth process in six stages;sixth of six models.teaching aid, obstetric delivery

Originally this teaching model belonged to Prince Henry's hospital library and was transferred to the Monash Medical Centre, Clayton in the 1970s.by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s . Has lables on base of stand. "Model 6A Female Pelvis on Stnd". AU 618.1/ 01 FemaleModel of female pelvis in cross-section, painted plaster on stand.teaching model, anatomy, female, pelvis

Originally this teaching model belonged to Prince Henry's hospitla library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s . Has labels on base of stand. "Model 6A Female Pelvis on Stnd". AU 618.1/ 01 FemaleModel of female uterus with partial cross-section, vagina, fillopian tubes and ovaries. Painted plaster with label "AV618.1 / 01 Female".teaching model anatomy, female uterus

Originally this teaching model belonged to Prince Henry's hospit�l library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Model of a foetus, approximately seven weeks. Painted plastic on metal rod with round wooden stand. Labelled on base "AV618.2 / 01 Fetus/ FOETUS". Stamped on base, "PRINCE HENRY'S HOSPITAL/ NURSES LIBRARY." Label on base"Adam Rouilly/ London England". The model has anaaatomical numberings in black ink. There must have been an acompaning information booklet [missing].teaching model anatomy, female foetus

Originally this teaching model belonged to Prince Henry's hospital library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Teaching model. Female Pelvis, cross section, flat 3D panel. Painted plaster on painted timber. Originally from Prince Henry's Hospital Nurses Library [ traces of stamp "PRINCE HENRYS HOSPITAL NURSES LIBRARY" on l.l.].teaching model, anatomy, female pelvis

Originally this teaching model belonged to Prince Henry's hospital library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Teaching model- 3D Female Reproduction Organs on stand. Plastic. Demonstration model for the insertion of cervical diaphragm. Manufacturer: Ortho, New Jersey. Barcode label Monash Medical Centre Clayton.teaching model, anatomy, female reproduction organs

Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.A French model of pelvimeter,external and internal,with two flexible arms, nickel plated steel, graduated 20-45 centimetres. Refer to Down Bros. catalogue 937/6/, page 9387. Manufacturer's stamp or initials of owner "M.S."pelvimetry

Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.A French model of pelvimeter,external and internal,with two flexible arms, nickel plated steel, graduated 20-45 centimetres. Refer to Down Bros. catalogue 937/6/, page 9387. Manufacturer unknown.pelvimetry

Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.A French model of pelvimeter,external and internal,with two flexible arms, nickel plated steel, graduated 20-50 centimetres. Refer to Down Bros. catalogue 937/6/, page 9387. Manufacturer unknown.pelvimetry

This a cast of the first baby to be delivered under anaesthesia, by the use of ether, in Edinburgh on 19 January 1847. The famous physician James Young Simpson, Professor of midwifery at Edinburgh University, attended this birth and wrote about it in the Monthly Journal of Medical Science 1846-7 Vol.7, p649-640. The cast of the baby's head was given to Lance Townsend, Professor of Obstetrics and Gynaecology, University of Melbourne by Robert Kellar, then Professor of Midwifery and Diseases of Women at the University of Edinburgh, when Professor Townsend was visiting Edinburgh. There is at least one other plaster copy; one is located at Wood Library-Museum of Anesthesiology, 520 North Northwest Highway, Park Ridge, IL 60068-2573, USAReplica of a new born baby's head, painted plaster, life size. The model of the head shows a large indentation of two and a half inches in the skull on the left side. The baby was delivered through a severely deformed pelvis, suffered a large indentation to the skull and did not live.obstetric delivery, anaesthesia

These forceps were owned by Dr John Sidney Green, who was very skilled in their use and at the peak of his career in 1936. Green was a contemporary of Arthur Wilson and Arthur Chambers [Communication from Dr Cyrus Jones, 17/7/1997]. These forceps are unusual due to the addition of the Neville traction rod attachment, which is usually associated with Barnes-Neville forceps rather than Simpson forceps. Developed by James Young Simpson in 1848, Simpson forceps have become arguably the most popular model of forceps for use, and were adapted in the creation of many later designs.Set of steel obstetric forceps, consisting of two blades and a traction rod attachment. Inscribed "J.S.G" on stem of left blade."J.S.G"obstetric delivery

Dr Mabel Maguire, widow of Dr Frederick Arthur Maguire (1888- 1953) donated it in 1962 along with a number of glass slides.Dr Maguire owned and used the item, giving Anatomy lessons to medocal students,. Used mostly in Sydney (University of Sydney) 1962Magic lantern or Baloptian [precursor to slide projector]. Model BC. Bausch & Lamb Optical Co, Rochester NY. Electrical, metal projector box with lens in bronze casing a timber frame for glass slides marked "(illeg.) PATENT ECLIPSE" an attached electrical lead with bakerlite plug. c1927.No slides, either missing or none received.instrument, optical

First developed by James Young Simpson in 1848, Simpson forceps have become arguably the most popular model of forceps for use, and were adapted in the creation of many later designs.Set of small, straight metal obstetric forceps with black bakelite insertions on handles. Stamped 'W. SKIDMORE/SHEFFIELD' on inside of left handle.obstetric delivery

First developed by James Young Simpson in 1848, Simpson forceps have become arguably the most popular model of forceps for use, and were adapted in the creation of many later designs.Short handled set of forceps, possibly made of stainless steel. Marked "DOWN LONDON" on inner aspect of left blade handle.'DOWN LONDON'obstetric delivery

These are parts of a vaginal douch apparatus set. The apparatus appears to be a T More-Madden model, as used at the Rotunda Hospital, Ireland.Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920.She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993.Black vulcanite bridge attachment (.1) and irrigator (.2). The bridge would attach to the rubber tubing of the set and a lead sinker, The bridge would attach to a stopcock at the proximal end of the set.midwifery

Maroon cover, gold print and trim, 1138 pages. On front of book 'Centennial International Exhibition Melbourne, 1888-9 Official Record' Patrick Payes, Mayor of the City of Sandhurst (Bendigo) was a member of the Commission and listed with other members of the Commission. The International Exhibition of Works of Industry and Art at Melbourne was held to commemorate the centenary ' of the founding of the first Colony of Australia' Some Bendigo exhibits include: Page 631: exhibit 1797, Harry J., Knape Street, American Gully, Sandhurst, Victoria - working model of a gold mine. Exhibit 1810, Percy and Hunter, Wattle street Sandhurst, Victoria - safety fuses for blasting operations. Exhibit 1811, Plainbeck, Hermann, Sandhurst, Model of a mine. The wine exhibits: page 304 - 317 A. Bruhn, EmuCreek page 305 - 306 F.Grosse, Strathfieldsaye page 307 W. Jones, Mandurang, page 309 H. Meyer, Mandurang, page 309 E. Schroeder, Castlemaine, page 310 F.K. Shaw, Goornong, page 310 A. Trinkaus, Muckleford, page 311 Albert Bruhn listed in competitors for Burgoyne Prize Bendigo Pottery Co, page 606.australia, history, centennial international exhibition

This model was found in the collection of Bay Steamers Maritime Museum. It is not knowt who created it but it is supposed that it was constructed to educate the many masters of the Wattle in the operation of a steam engine - a not so common mode of power these days. A Bay Steamers Maritime Museum examined the model in March 2012 and discovered that is was in poor repair. Using his existing knowledge, and with reference to some historic texts, he made some repairs and returned the model to working order. Here is his anaylsis of the situation as an excerpt from the Bay Steamers Maritime Museum newsletter Steamlines May 2012 "I was confronted with a model of a steam engine used years ago as a training aid for hopeful steam engineers. Already having a knowledge of steam operations, I considered a museum write-up for that model a ‘piece of cake’. However, on turning the model’s crankshaft, the valve timing seemed ‘out of kilter’ with the movement of the piston. Problem was that the two eccentrics on the crankshaft were not properly secured to it. Eventually I fastened the two eccentrics to the crankshaft where I felt that they should be and then realized that one of them had a chain-driven valve-timing device attached. This would be adjusted while an engine was running to achieve best performance and fuel economy whilst in operation by accurately controlling the period of time during which steam under pressure from the boiler would be admitted to the cylinder and give greater time for the steam to expand in the cylinder, move the piston and turn the crankshaft and thus, drive the attached apparatus. When the valves were correctly set up it was then possible to get the model to function properly.The model comprises a green section, which is the actual the model mounted on a brown painted board. There are two parts of the model, painted white representing the steam passages, and black representing the cast- iron portions of the cylinder-block casting, and of the main valve sliding between the cylinder a second sliding valve. Of the black portions, one slides back and forth being connected to a rod which is connected to an eccentric clamped to the crankshaft and is the nearer to the flywheel of two eccentrics. This eccentric is attached to the crankshaft at an angle of 90 degrees to the crank-pin attached to the flywheel. To operate the model simply turn the flywheel by means of the handle attached to its crank-pin. A second eccentric is also attached to the crankshaft, further away from the first eccentric, and it is adjusted to operate 90 degrees from the first eccentric (that is, 180 degrees from the crank-pin) A piston (painted silver) is located in a plastic cylinder and has a piston rod which passes through one end of the cylinder, (in actual practice a steam-proof gland seals the cylinder against loss of steam) terminating in a cross-head slide between four rails guiding it. From this cross-head, a connecting rod joins the piston-rod to the flywheel via the crank-pin attached to the flywheel which is part of the crankshaft. (In actual practice, a flywheel may not be used, particularly in a multi-cylinder engine.) The white portions of the model painted nearest to the cylinder represent the two steam ports cast into the main cylinder block, whilst one section painted in between those two represents the exhaust outlet (which may be connected to a condenser to conserve water, or to the open air). The main slide valve has three white-painted portions painted thereon. It has two white-painted marks representing the steam passages to the steam ports into the cylinder, and a third section in between the other two, being that part of the valve through which exhaust steam passes in line with the ports in the cylinder block. By rotating the flywheel, the operations of an engine will be observed as steam is admitted to the main valve via the gap between the two jaws of two moveable portions of a second sliding valve which is operated by the second eccentric attached to the crank-shaft. This eccentric is used to finely tune the valve timing of this model to obtain best running results of an engine. There are various methods used for reversing a steam engine. model compound steam engine, steam engine, model, crankshaft, valve, flywheel, wattle, engineer, eccentrics

The first electrical hearing aids were carbon and were made possible by the invention of the carbon microphone and were made between 1900 and 1939. Carbon, which can be made to amplify electrical current, was used to provide some amplification prior to the invention of vacuum tubes. Later models often came with mechanical (carbon) amplifiers to try to boost the amount of amplification. The carbon microphone was originally invented for use in the telephone and had the properties of being able to modulate current. It is this property that made it useful in the early electrical hearing aids. An example of a carbon hearing aid. This has an imitation tortoise shell casing. Round dark red and black imitation tortoise shell carbon hearing aid with clip for attaching to clothing, and a slide for adjusting the sound (?) a cord split between a plug and a speaker (?)."SONOTONE/REG U.S.P.A./292392/MADE IN U.S.A./ELMSFORD, N.Y." on bottom of unit. "SONOTONE" on plug. "PAT RE 21030" on speaker? deaf children australia, hearing aid, sonotone

The Phonic Ear hearing aids were actually auditory trainers for children in school. This is the teachers transmitter which they would wear. Beige FM Microphone Transmitter with plastic loop for over the head and a small black hearing device and a microphone in the top. Individually decorated with plastic girl sticker, upside down, (put there by the wearer?) "PHONIC EAR" "FM/MICROPHONE/TRANSMITTER" on front. "PHONIC EAR/MODEL HC4211/TYPE GODKENOT" on back. "3335 173" scratched on back. deaf children australia, hearing aid, auditory training device, phonic ear

The Phonic Ear hearing aids were actually auditory trainers for children in school. This aid was also an FM receiver so the child could clearly hear the teachers' voice. This was used by the student to receive the teachers' transmissions. For more information see: http://www.hearingaidmuseum.com/gallery/Miscellaneous/Assistive%20Devices/Phonic%20Ear/info/phonicearfmsystem.htm Beige FM Receiver with red plug-in crystal module (colour coded for frequency) and two leads on either side for hearing aids. This would have been used by the student to receive the teachers transmissions. Masking tape on front, obscuring name, writing on tape faded. "MODEL/HC 421 R/STEREO/AUDITORY TRAINER/FM/CERTIFICATION/THIS RECEIVER COMPLIES/ WITH FCC RULES PART 15/OPERATION IS SUBJECT/TO THE CONDITION THAT/ THE DEVICE WILL NOT/CAUSE HARMFUL INTER-/FERENCE AND THAT THE/DEVICE MUST ACCEPT ANY/INTERFERENCE THAT/MAY BE RECEIVED, INCL-UDING INTERFERENCE/THAT MAY CAUSE UN-/DESIFED OPERATION./PHONIC EAR/MODEL HC 421 R/TYPE GODKENOT/ deaf children australia, hearing aid, auditory training device, phonic ear

Black box with "Sonotone" on lid with red felt & cream linings, containing two hearing aids: one silver hearing aid with black back using AA batteries with clip, Polyfon "popular" transistor (Body) hearing aid, and one silver hearing aid using 2 batteries: H.T & L.T. batteries with clip: Foriphone Model 40 Hybrid hearing aid. No ear pieces. Probably the 'old' hearing aids put in the 'new' hearing aid box. Box "Sonotone" on lid of box. Hearing aid 1. "POLYFON' in blue on bottom edge "POPULAR/SER NO 22155" on battery compartment. Hearing aid 2. Inside battery compartment "MODEL 4.0 / TRANSISTOR / FORTIPHONE / ENGLAND / PAT 634202 / 175026". Instructions re: batteries. 30V H.T battery and L.T. battery

Light brown top with dark brown base telephone keyboard. Made of plastic with sockets for the handpiece of a phone, a QWERTY keyboard and small (5cmW) printer, possibly with a screen. Used to take and send telphone calls. Uses batteries and has a handle for carrying. On top: "PRINTACALL/SSI-220" On back: "SSI / INNOVATIONS IN COMMUNICATIONS" On bottom: in middle of metal plaque "SSI-220 / Power: DC 6V/ Type "C" x 4 / (RECHARGEABLE BATTERY) / SPECIALIZED SYSTEMS, INC. / SAN DIEGO, CALIFORNIA / MADE IN JAPAN / SERIAL NO. 02478" On sticker on back: "MODEL. SSI-220 / SERIAL NO. 84840001 / Printacall Pty. Ltd. (02) 2648104 / P.O BOX A623 Sydney South 2000 N.S.W. Australia." Inscribed on R side: "HEIDELBERG HIGH SCHOOL / HEARING IMPAIRED UNIT NO 3" Label on L side: "TELECOM AUSTRALIA / Permit No 08216 103/2"

Black box with QWERTY key pad, small 1 line screen with attachment for connection a phone headpiece which includes instructions and carrycase. Used so that telephone conversations can by held by hearing impaired Front: "PRINTACALL" Back labels: Metal: "TELECOM AUSTRALIA / Permit No. C82/18/108//PP2" Sticker: "MODEL: PP2 / SERIAL NO: 06830079 / PRINTACALL PTY LTD (02) 2648104 / P.O. BOX A623 Sydney South. 2000. N.S.W. Australia" Metal sticker: "SERIAL # AP830060089 MODEL# POCKET PHONE II / C-PHONE INC. / ST. LOUIS, MISSOURI"

Skates were and still are widely used in winter time in The Netherlands, when the rivers, canals, creeks, ponds etc. are frozen solid. Paintings out of around 1600-1700 show models of skates very much like the one shown. Even until as recent as 40 years ago, the wooden skates (with steel blade) that are tied to the shoe with leather strap and laces, were widely used in the Netherlands. Even now they are still made in children sizes, because of there flexibility in adjusting to a range of shoe sizes.Skating is a tradition which remains popular.Wooden skates, with brown leather straps. It has a metal strip on the base of the wood, which is necessary for gliding on ice.Letter R for right foot No letter for left footdutch migration skates wood

Wooden shoes are / have been widely used in North-Western Europe (Scandinavia, parts of Germany, UK, The Netherlands, Belgium and Northern France). The models vary from a wooden sole and toe covering (Scandinavia, UK, Northern France) to a complete cover of the whole foot (The Netherlands and parts of Belgium). They are mostly made from poplar wood, but occasionally also from other softwoods like willow. The clogs' finish varies from plain wood or carved wood to varnished or painted versions, often with decorations. Nowadays special models are made for tourists with pictures of Dutch landscapes, tulips or windmills.Although wooden shoes are also used in other countries, the full foot covering model has become one of the symbols of the Netherlands, like the tulips and the old style houses in towns like Amsterdam.Pair of male size wooden clogs - completely covering feet, finished with clear varnish and shoe lace like decorations.Brand indication V Z clog and size 43/44 = 28 1/2cm - Shoe laces like decorations.wooden shoes holland dutch traditional clothing