A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture.Compass saw with wooden handle and metal blade. Small teeth. flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

This medium sized metal, horse-drawn, road-working scoop, with timber shafts is an example of those used in Moorabbin Shire in the late 1800s, and up until the 1940s for road-works, building dams, market-gardening work and other similar earthworks in the shire. The Box Cottage museum example would have been drawn by one horse, with the worker walking and steering the horse and scoop from behind using the timber shafts. There were even bigger metal scoops that required two or more horses to drag the scoop through the soil.Following the Dendy Special Survey 1841 allotments were sold to pioneer settlers who established market gardens in the Moorabbin area. Roads and roadside dams were needed as they transported both their stock and garden produce to markets in St Kilda and Melbourne By1880 the Shire of Moorabbin was using horse-drawn, road-working shovels on the main thoroughfares of the district.A medium sized metal, horse-drawn, road-working scoop, with timber shafts. Used by Moorabbin Shire in the late 1800s, and early 1900s for road-works, and other similar work in the shiremelbourne, shovel, brighton, moorabbin, metal, gardens, roads, markets, mckinnon, cheltenham, horse drawn, scoop, dendy henry, st kilda

These types of metal and glass railway signal lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a clear glass lens secured at the front and one thin elongated oval shaped handle showing at the back. The metal appears to be tin plated iron under the black paint layer. There is an oval plate with an embossed inscription on the proper left side of the lamp that is partly covered by the door at the front which holds the clear glass lens. The inscription includes the date 1901."...NARIPPINGILLE STOVE / CO LTD 1901 / PATENT...S & / ...NUFACTURERS / RMINGHAM" on an oval shaped plate on the proper left side, which is partly covered by the door with the clear glass lens.railways wodonga, victorian railways

François Boullier of France and Isaac Hunt of England both took credit for inventing the cheese grater in the 1540s. Ingredient supplies, mainly milk, ebbed and flowed in both France and England, as they have in the United States during this coronavirus pandemic. Boullier originally aimed to use up an overabundance of cheese in Paris. An avoidance of meat led French farmers to convert their meat herds (often boys) to dairy-producers (girls), which led to more milk and even too much milk, which led to a market flooded with cheese. Boullier made his first cheese grater out of pewter to grate hard, sometimes dried out cheeses, which turned them into a sort of condiment. Pewter is known as a rather soft metal, and Boullier’s original grater is reportedly on display in a museum in Le Havre, France. Isaac Hunt wanted to stretch cheese due to a shortage in England, so he grated and melted it for Welsh rarebit and other dishes. Grating cheese allowed more even distribution of the cheese to melt it in cooking and still does. During the Great Depression of the 1930s, Philadelphia cheesemonger and entrepreneur Jeffrey Taylor also wanted to stretch cheese for to bulk up cheese features, including vegetables, to make them look like more filling food during difficult economic times. Taylor read about Boullier’s invention and made his own by sharpening the holes of a metal shower drain. For the last century, many companies have tried to improve the cheese grater and invent a new “latest” one that we all must-have. Graters are now made of all sorts of materials including bamboo, wood, and various metals. Some are decorated with clowns’ heads, some are shaped like plastic frogs, while others bear knuckle protectors. They vary in size, shape, and function. Grating slots come with different angles and shapes of slots and can grate everything from zucchini, onions and cheese, to cooked eggs, coconut, potatoes, cabbage, and lemon and orange peel, and possibly even create wood shavings. Smaller graters grate ginger and garlic. https://www.cheeseprofessor.com/blog/antique-cheese-gratersThe grater has been used for hundreds of years and has proved its worth in the kitchen throughout history.Grater metal (3 parts) Tripartite with hinges for folding.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, grater

The Schreder HP 14T is a variant of an all metal single seat sailplane designed by Richard Schreder of USA in the 1960s. The HP14T featured a ‘T’ tail in place of ‘V’ tail of the HP14V. The design was marketed to home builders in kit form. The Museum’s Schreder HP14T (VH-GIB) first flew on 31 August 1974. It has recorded 280 hours in the air from 239 launches to 28 January 1989, the date of its last flight. It is understood that VH-GIB was partly constructed in North America and completed in South Australia by C.G.M. Coxon. Ownership passed to the Georgeson Syndicate of Rockhamption, Queensland and later to Warren Mayfield of Victoria. Warren Mayfield donated the glider to the Museum in April 2002. All metal single seat glider sailplaneRegistration lettering on rudder and fuselage sidesaustralian gliding, glider, sailplane, schreder, coxon, georgeson, mayfield, slingsby, bache, waikerie gliding club

Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have probably been used on a farm or delivery wagon in the Warrnambool district. Horses played a vital role of the agricultural industry in Warrnambool before the mechanisation of farm machinery. This item is associated with that time.Hames - Harness pieces (2) black metal with hooks, rings & chain. Wattle stamped.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Frank Saunders was the foundation president of the Upper Kiewa Valley Ambulance Service. There was an Ambulance service in the Upper Kiewa Valley commencing in April 1940 when a four stretcher ambulance was made available on the Kiewa Hydro Electric Scheme. It was designed for comparatively long and rough trips, involving some departures from usual ambulance design. Companies involved were O/C Motor Vehicles (Mr Frank Stone), in collaboration with the builders, Messrs. Jas. Thompson & Co. of South Yarra. (Ref. SECV magazine. April 1940.)This brown wooden framed plaque is backed by masonite and surrounds a black metal sign with gold lettering beside which there is a photo of a Frank Saunders. The photo is also framed with wood.Metal plate with gold letters in capitals: "Upper Kiewa Valley Ambulance Service / This Plaque is Dedicated / to the Memory of our / Foundation President / Frank Saunders / whose Leadership / Foresight and Devotion / has Inspired all Members/ of the Service"frank saunders. ambulance. upper kiewa.

Used in the Physics Department at the Ballarat College of Advanced Education.Desk-top electric calculator with 16 digit electronic display; 4 memories; operations controlled by keyboard. Type: Sharp Compet 363P; Serial No. 11110811Metalic adhevise strip label: "Ballarat C.A.E. PHYSICS"ballarat college of advanced education, physics, sharp, electronic calculator

Used in the Physics Department at the Ballarat College of Advanced Education (Now Federation University.Desk-top electric calculator with 16 digit electronic display; 4 memories; operations controlled by keyboard. Type: Sharp Compet 363P; Serial No. 11110811Metalic adhevise strip label: "Ballarat C.A.E. PHYSICS"ballarat college of advanced education, physics, sharp, electronic calculator, calculator

The Kerosene lamp was one of the most common oil lamps used and was manufactured until the 1980s. The Anchor Lamp design was used for marine purposes in the days of sailing ships when a ship at anchor or sailing in the dark was required to display a white light on the top of its main mast. The Anchor Lamp's top loop was for a rope to hoist it up the mast, and ropes through the two bottom loops to anchor it in place and prevent it from swaying. The light could be seen by ships up to 20 miles away due to the magnification of the Fresnel glass lens. This lamp in our collection has a design is similar to the early marine designs but its finish and materials resemble lamps made in the 20th century to represent the older ones. The etched "20" on its cover could represent the 20-mile distance the light could shine, and the "↑" Broad Arrows could represent a maritime navy ship. The lamp is an example of 19th and early 20th-century Anchor Lamps fueled by kerosene and used onboard ships when at anchor or sailing at night.Kerosene lamp; This Anchor Lamp design has a brass frame, a handle with a loop at the top, a rail around the base two opposing loops, and a kerosene burner and tank with ventilation holes around it. A clear glass Fresnel 360-degree lens covers the burner. It is an All Round design. The brand Anchor is inscribed on a plate fixed to its brass cover. An etched inscription on the cover includes the Broad Arrow symbol identifying government property.Engraved plaque: "Anchor" brand. Etched into the metal: "↑20↑"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, kerosene lamp, lighting, ship light, anchor lamp, marine technology, marine lamp, 20 mile light, broad anchor, oil lamp, whale oil lamp, ↑

U.S. ARMY COAT BUTTON, GUILT, ROUND, 11mmMarked on back Metal Works Inc. Newark N.J.uniform, post 1960, army

Used in the 20h century.A pair of vintage hand horse clippers with two steel blades, a lower blade or comb and a moving blade or cutter that work together to cut the hair. It attached with screws to two steel handles with wooden grips attached by brass fitments.Imprinted on the metal joining the blades - 'A. Martin & Co. Manufacturers'horse accessories, horses, horse clippers

Hair clips such as this one would have been worn by women in the 19th and early 20th centuries and would have been used to keep back long hair from around the face. Similar clips may be used today but they would more likely be made of plastic or ornamented metal. This hair clip has no known provenance but is an attractive item and is retained for display purposes.This is a curved shell (perhaps tortoise shell) hair clip with an ornamental fretwork pattern in the centre. A metal piece, slightly curved, is attached to the clip with a screw. vintage hair clips, history of warrnambool

A variety of Vegemite jars: 115g jar with yellow plastic lid (manufactured 2008), standard labelling; 145g jar with red metal lid (manufactured 2010), special labelling 'New, Name Me', possibly first edition of 'Cheesymite'; 235g jar with orange plastic lid (manufactured 2016), labelled as 'Reduced Salt', part of the 'Beat the Drum Campaign' to support Australian Olympians in Rio de Janeiro.Shows the variety of this common spread.3 Vegemite glass jars, different labels and sizes. Plastic or metal lid, paper or plastic labels.vegemite jars, kraft foods

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw with wooden handle broken and metal blade. Small teeth.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

This small metal plane was manufactured in 1909 by Spiers-Stewart, Ayr, Ayrshire, Scotland. Stewart Spiers began making planes in Ayr in around 1840. The business continued successfully as a small operation until the mid-1930s.This plane is an example of tools made overseas and used in the 1900's. Box plane; hand operated small metal plane with round wooden knob. Plane has separate blade and blade cap. Inscription on blade cap is indecipherable. Originally marked as made by Spiers."SPIERS"flagstaff hill, warrnambool, maritime-museum, maritime village, shipwreck coast, tradesman's tool, plane, box plane, tool, spiers-stewart, early 20th century, scotland, hand tool, stewart spiers, spiers, woodworking

Blue hardcovered book of 819 pages"12/6/34 Office NO 391"minerals, mining, metals, coalo, stone, gas

Stamp cases/holders began being produced in the late 19th century, commonly made of gold, wood, and silver. In this case, the item is made of sterling silver and has patterns and details etched into the metal sheets that make up the case. Sterling silver is the standard alloy used in jewellery and detailed metalworks with its physical properties making it maleable and corrosion resistant, therefore a favourable metal to work with both across many centuriesn the past and present. Stamp cases where popularised by James Allen of Birmingham who created and registered the stamp holders he made. As they gained popularity, it was common for stamp holders to consist of multiple compartments holding various small items such as matches, strikers and of course stamps. Metalwork and silverwork has been a prominent proffession and artform historically and socially for many years. There are many different types of metal work to specialise in and distinct patterns and inscriptions for identifying the provenance of the item. Hallmarking is this proccess of inscribing the item, and consissts of four main components (including assaying) which can indicate the date of creation. Unfortunately this item has no hallmark, therefore it is relatively unknown where, what, when and who created it.This item is of social and historic significance as it highlights the importance of preserving histoical items. This item display's the intricate and highly skilled trades of the past with a glimpse into the social and cultural aspects of the beechworths' history.A small, silver stamp holder with decorative details etched into the metal. It has a small loop on the left side of the case, indicating it could be connected and held by a chain or ring. A01145 (obejct number): A01145 [object number inside stamp case] / STERLING SILVER [inscription inside stamp case]metalwork, silver, silverware, sterling silver, stamp holder, stamp case, burke museum, social history, burke museum collection, beechworth

These items have no known provenance and no information has been found on the Barnards on the printing blocks, delivery paper and stamps. The stamp for ‘W.I.O. Barnard’ was sent to an address in Camberwell so it is presumed that the Barnard family members were in Melbourne and not in the Warrnambool district.The only interest in these items is in the printing blocks and stamps. They are good examples of the type of printing used in the early 20th century and the type of stamp used by individuals for letterheads, visiting cards, personal items etc. There are 5 objects in this collection:- 1. A small red cardboard box 2. A printing block with a tapered wooden base and metal type – E.D. Barnard There are three small nails holding the type to the wooden block. 3. A printing block with a metal ring handle – R. Barnard 4. Five metal type letters (G, I, K, O, W) 5. A much-tattered sheet of paper showing delivery of stamp to ‘W.I.O. Barnard’ Wooden Block – E.D. Barnard Metal Block – R. Barnard Box - stamped E.D. Barnard Paper – ‘Linen Stamp Co. 231 Elizabeth St. Melbourne, Please deliver stamp and pad at 2/6, Name: W.I.O. Barnard, Address: 29 Bowen St. Camberwell, Signature: E. Barnard’ barnard, printing blocks

PLAQUE WAS AWARDED EACH YEAR FOR THE CATEGORY OF "ASSISTANT TRAFFIC OF THE YEAR" MELBOURNE TRANSPORT UNIT FROM 1980 TO 1988.Brown wooden plaque with gold metal heading and individual metal name labels. Also in-between badge emblem of Royal Australian Corps of Transport.Headed "Assistant Traffic of The Year" then "Melbourne Transport Unit" then "RACT" then "Presented by WO2 D. C. Forrest" then 12 metal labels, 9 with names of recipients from 1980 to 1988. 1980 - CPL T. WELLING. 1981 - CPL A. McLEOD. 1982 - PTE S. GLEN. 1983 - CPL DORE. 1984 - LCPL PAWLEY. 1985 - CPL A. J. BARBER. 1986 - PTE E. SZENTPALY. 1987 - CPL I.D. McLAREN. 1988 - CPL CARTER & CPL FRAWLEY.passchendaele barracks trust collection, wooden plaque, melbourne transport unit

This metal plaque was dug up in a Warrnambool garden in the early 1980s. It appears to be an item that would have been attached to a wall or building and is possibly a representation of a British military figure involved in military campaigns or colonial administration in a British Empire outpost in the 19th century or early 20th century, perhaps in the Middle East or in north Africa. It could also be a non-British military figure from the same areas. This item is of minor interest as an object found in Warrnambool but with no known details of what it represents. . It is retained pending further research. This is a metal plaque showing the head and shoulders of a man wearing a fez and a military uniform. The back is slightly hollowed out.warrnambool, metal plaque, military plaque

This battery treminal was removed from one of the Japanese Midget Submarines sunk in Sydney Harbour during the night attack on Sunday 31st May 1942 and sold publicly as a souvenir to raise money for the RAN relief funds for sailors. Metal plate - two round black metal lugs on top of a flat grey lead plate with four Japanese characters stamped on the base off the top of a battery from a Midget Submarine, with a cardboard souvenir card.Metal Plate - four Japanese characters. Cardboard tag - "A Guaranteed Souvenir / from the / Japanese Midget Submarine / Sunk in Sydney Harbour,/ Sunday May 31st, 1942" / sign by "Rear-Admiral in Charge, Sydney /July 30, 1942 Proceeds to RAN Relief Fund & King George's Fund for Sailors". Back of Tag - "27th November 1942 on show in the Gardens in Melbourne"souvenenir, japanese midget submarine

This item is part of the Di Reidie collection. Diane Reidie was a much loved volunteer and President of Brighton Historical Society from 1999 until 2016. Originally from New Zealand, Di and her family lived in Male Street, Brighton for many years. A vibrant and energetic person with a zest for life and a gift for bringing people together, Di was a friend to many in the Bayside community and active in local community organisations. Her tireless work as President of BHS saw her named Bayside Citizen of the Year in 2008. As a seller and collector of vintage clothing, she was passionate about fashion history; one of her many enduring contributions to BHS was her extensive work in preserving, developing and promoting the Society's costume collection. In 2018-19, Di donated more than one hundred items from her personal vintage clothing collection to the Society. The collection, which includes clothing, hats, handbags and shoes from local and international designers, is representative of Di's wide-ranging interests, colourful personality, creativity, humour and love of fashion and travel. Di wore these novelty car print "Howard Showers" pants to many car rally events in Victoria, Australia and USA between 1990 and 2010, where she would perform the role of navigator and co-driver in a team with her husband David. Di's choice of clothing at the rallies is indicative of her sense of humour and attitude towards clothing. Cream coloured cotton French terry cloth pants with metal zip fly front, branded button closure, feature red stitching and printed cars in black ink. There are several car designs featured with each design appearing c1960s - 1970s. One car design features the name "Howard" on its number plate. Manufacturers label "Howard Showers, Holiday, size 12" Metal button inscription "Howard Showers, Syd (Sydney), Aust (Australia). "Made in Australia". Care label. howard showers, novelty print clothing, 1990s, di reidie

Produced by Camberwell depot staff to mark the 80th anniversary of the depot - 1929 to 2009. Has the letter of the depot printed on the front of the depot. Metal badge has the name of the depot as well as "V" and "80". On the inside of the card explains the basis of the depots timetable or run number letter V, because it was located in the Vee formed by Riversdale and Camberwell Roads. The second card notes that the depot is not in Camberwell but Hawthorn East and that there are no numbers on the rear wall after a tram crashed through it in the early 1970s. Made by Australian GiftsDemonstrates a Camberwell Depot produced item.Set of two items - printed blue card with a metal badge and pin retaining clip.tramways, camberwell depot, 80th anniversary, badges

The relatively large battery charger is in a metal cabinet that has dials and switches on the face. It was used by the PMG to charge radio telephone batteries between the 1960s and 1990s. Cape Schanck Lightstation also has a battery charger that is part of a set of items associated with the electric operation of the lighthouse Meets first level threshold.Battery charger encased in a large metal cabinet, with black dials, with white faces & switches on either side of the front of the cabinet. Makers label as bottom of cabinet. Some staining." Constant Potential Rectifier....."