Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Dust explosions are the result of high concentrations of combustible dust particles rapidly combusting inside an enclosed space. When mixed with oxygen these fine particles can ignite when in contact with a spark, metal ember, cigarette butt or other source.Wooden box with metal edges on top. Chrome handle and indicator buttons for Power, Air, Compression, Spark. Hinged front section that opens to show contents. Electrical Engineering lecturer Graeme Hood remembers Paul Brass demonstrating this unit to show how dangerous a combination of dust and electricity it. The demonstration would take about 1 minute, and would culminate with a loud bang which would make everyone jump. This item was probably last used by Paul Brass.viosh, victorian institute of occupational safety and health, dust explosion, combustible dust particles, enclosed space, spark, ember, cigarette, oxygen

This metal tin once contained sewing silk thread, and was later used for storing 'B' hinges used in the making of the ship model, Sovereign of the Seas. Natural silk thread used in the model has elasticity and can also be teased out for making fine line for rigging on ship models. This object is one of the tools and accessories used by Jim Williams from about 1930-1955 to hand craft the ship model “HMS Sovereign of the Seas”. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This tailor’s silk container, and its later used as storage for hinges, was used in the hobby and skill of ship model making that has been carried as a leisure activity out for generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This tin was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Tin, round, with lid. Red label reads “The "A.B.C" Brand Tailors Sewing Silk (Raven) Color Fast. Dyed by a new process. Manufactured from the best raw silks procurable. Warranted. Made in England. Size No. 1/4 LB” .The container has no contents. This tin is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. “The "A.B.C" Brand Tailors Sewing Silk (Raven) Color Fast. Dyed by a new process. Manufactured from the best raw silks procurable. Warranted. Made in England. Size No. 1/4 LB”, Logo on lid is the intertwined letters of “A.B.C.”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model tools, ship model making, ship model making accessories, "a.b.c" brand tailors sewing silk, b hinges, textile, silk thread, sewing silk, shipwreck coast, ship model, hobby, ship model tool, english war ship

[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Three colour photographsactivities, clifton pugh, dunmoochin

[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Two colour photographsactivities, clifton pugh, dunmoochin, leon saper

[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Colour photographactivities, clifton pugh, dunmoochin

[from EDHS Newsletter No. 78, May 1991:] DUNMOOCHIN TRIP "Dunmoochin" was the home of the famous artist Clifton Pugh who died last year. The house also gives an informal name to the surrounding area at Cottles Bridge where artists, conservationists and like minded people have made their homes. This is an area of unconventional houses blending in with the surrounding bushland. The Pugh house is a rambling complex including studios and a large pottery kiln. It contains many of Clifton Pugh's works. For this excursion we have arranged a guided visit of the Pugh house and hope to be able to visit another house in the area. We will also be able to wander through bushland which Clifton had purchased for conservation purposes. This will be an afternoon excursion on Sunday 26th May starting with lunch (bring your own) at 12:30 pm at the Panton Hill Memorial Park. Transport will be by private car but transport can be arranged for those not wishing to drive. There is no cost but we need to be advised of members attending. Advise Russell Yeoman at the May Meeting or by 10th May if you intend to go. We will not be able to add extra people after that date.Three colour photographsactivities, clifton pugh, dunmoochin

The Uebergang family came from Silesia to Australia in 1848 and were early settlers in the Allansford area. The sons and other descendants also purchased farms in the area. The Percy Uebergang family lived at Tooram Park, Allansford from 1912 until 1992. Percy and Myrtle Uebergang's children were twins, Ray and Joyce born in 1926 who lived at Tooram Park until their deaths, Ray in 1986 and Joyce in 1992 after which the property was sold. Neither Ray nor Joyce married and following the death of her brother Joyce set up the Ray and Joyce Uebergang Foundation which supports the local community. The collection of items from their property was put into store for a number of years before being given into the care of the Cheese World Museum. The family often re-used, recycled and repaired items and examples can be seen in the museum. This item is part of the collection of items given into the care of the Cheese World Museum. The Victorian Education Department compiled set tests for schools. This test aimed at Year 6 students dates from 1904 and includes some complex written arithmetic problems, grammar analysis and an essay on 'Clothing'. This test sheet is significant as an example of the level expected of Class VI students in 1904.A single page printed in black ink on dull orange coloured paper with tests arithmetic, grammar and composition for Class VI, No.65, 1904 composed by the Education Department, Victoria.EDUCATION DEPARTMENT, VICTORIA/CLASS VI/No.65, 1904/WRITTEN ARITHMETIC/ … /GRAMMAR/…/COMPOSITIONallansford, grammar, school tests, arithmetic, composition, education department victoria, education, schools

When scrimshaw is mentioned, most people think of carving on sperm whale teeth only. But scrimshaw also includes engravings on skeletal whale bone–such as the jaw bone, called panbone–and ivory from other marine mammals such as walrus. Although scrimshaw is widely associated with nautical themes and designs of the 19th century whaling industry, vintage scrimshaw was also produced as tribal art in many cultures. Today, scrimshaw is recognized as a unique medium in which present-day artists have developed their own modern themes. Scrimshaw reproductions may take several forms. There are - New carvings on genuine ivory or bone with the deliberate intent to create an "antique” - New carvings on genuine ivory or bone sold as signed and dated contemporary art - Clearly marked synthetic museum reproductions and mass marketed - Unmarked synthetic replicas Painstakingly carved deliberate replicas are directed towards the scrimshaw collector and seldom appear in the general market. Pieces of contemporary art and museum copies are usually clearly marked and openly sold for what they are. The biggest problems in the general antiques market are the mass produced synthetic reproduction pieces, such as this item, that can be mistaken for the genuine item. The scrimshaw is a modern reproduction of a typical scrimshaw scene and engraved onto a synthetic substance. It has been created as a decorative piece and is currently displayed as a representation of the craft of scrimshaw.Scrimshaw carved on a non-natural material in the shape of a whale tooth. Engraving depicts a grizzly bear with two cubs next to a fallen tree. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, craft work, carving on bones, whale bone carving, engraving, scrimshaw, carving, reproduction scrimshaw

At the Ballarat Technology Park (BTP) the spirit of innovation and entrepreneurship enables techno-driven businesses to thrive and prosper, in a dynamic and supportive environment. This fast evolving precinct encourages and supports the development of emerging and existing technology-oriented enterprises. Currently, more than 30 enterprises are located at the Park, including IBM, State Revenue Office, Emergency Services Telecommunications Authority, Primary Health Care and others. The Park's ideal location on the outskirts of Ballarat provides great lifestyle opportunities as well as having the convenience of being close to Melbourne, Geelong, Bendigo and Western Victoria. The BTP is a prestigious 29 hectare site set in a park-like environment, 7km from the thriving regional city of Ballarat. It is easily accessible from Melbourne, Geelong and Bendigo. Adjacent to Federation University's Mt Helen Campus, the BTP is ideally situated to support innovative technology-based enterprises grow and prosper. Enterprises can access skilled graduates through the University, as well as take advantage of the applied, academic and research knowledge available. BTP has been successfully supporting and fostering industry, innovation and job creation since 1995.Colour photograph of four men are seated at a low round table viewing design development drawings of the Greenhill Enterprise Centre prior to commencing documentation for tender purposes. They are Alan Webb (University of Ballarat Director, Buildings and Grounds), Professor David James (University of Ballarat Vice Chancellor), Michael Vincent (architect) and James Crisp (architect).ballarat technology park, university of ballarat., greenhill enterprise centre

A baby bottle is a bottle with a rubber or latex teat attached so that baby can drink directly from it by sucking on the teat. It is typically used by infants and young children ,when a mother does not breastfeed, to feed infant formula, expressed breast milk or paediatric electrolyte solution. Australian Glass Manufacturers produced glass bottles for pharmacy, brewery, dairy and domestic use 1913 – 1970 . Melbourne Glass Bottle Works Co Pty Ltd Registered in Victoria in 1903 amalgamated with the Waterloo Glass Bottle Works Ltd in 1915 to form Australian Glass Manufacturers Company, Limited. .Melbourne Glass Bottle Works Spotswood 1872- 1970 comprising a complex of buildings constructed between 1880 and 1940, (at Booker Street, Douglas Parade, 2-38 Hudson Road, Raleigh Street and Simcock Avenue, Spotswood ) originally made bottles for druggists Felton Grimwade before it was sold to the State Government by US multinational, OI glass manufacturers. . The Baby feeding bottle has graduated markings in 1- 6 ounces which shows that it was made prior to the introduction of Decimal Currency in Australia 14/2/1966. A clear glass feeding bottle. It is 'banana shaped' and open both ends with graduated measurements - 1-6 ouncesAGEE/ THE PERFECT FEEDING BOTTLE / OUNCES 1-6* bottles, feeding bottles, infants, breastfeeding, moorabbin, bentleigh, ormond cheltenham, glass, australian glass manufacturing company ltd, decimal currency, imperial measurements, ounces, milk, dairy, baby formulae,

A hammer is a tool with a heavy head and a handle, often made of shock absorbent wood or fibreglass, that is used to strike an object. The most common use for hammers are to drive nails, fit parts, forge metal and break apart objects. Hammers vary in size, shape and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head, most often made of steel and handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and handle, fastened together by means of a special wedge made for the purpose, or by glue, or by both . This 2 piece design is often used to combine a dense metallic striking head with a non-metallic mechanical shock absorbing handle - to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often ash or hickory, which are tough and long lasting materials that can dissipate shock waves from the hammer head. This upholsterer’s hammer has one end of the steel head rounded for knocking nails into wood furniture. The other end is divided to form a 2 pronged claw for withdrawing nails. . An upholsterer's hammer with a steel head and wooden handle, The steel head has one rounded end and a clawed endpioneers, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, brighton, tools, craftsman, carpenters, cabinet makers, blacksmiths, builders, woodwork

J & G Meakin was an English pottery manufacturing company founded in 1851 and based in Hanley, Stoke-on-Trent, Staffordshire. In the 19th century, J & G Meakin was known for the vast quantities of cheap ironstone china it produced for the domestic English market and export to Australia, Canada, New Zealand, and the United States and one of these pottery lines was called "EMPRESS" and was in production through the 1930s. From around 1970, designs included Liberty, Sterling, Trend, Classic, and Heirloom. Some of these were influenced by earlier designs. The newer wares can be distinguished by back stamp markings such as 'permanent colours', 'everlasting colour', or 'dishwasher proof'. J & G Meakin had close family and corporate affiliations to the potteries Johnson Brothers, and Alfred Meakin Ltd, which explains why many patterns are similar, if not almost the same. There was a takeover by J. & G. Meakin in 1968 of Midwinter Pottery. The firm was then taken over by the Wedgwood Group in 1970. In 2000 production under the Meakin name ceased and their long-established works, Eagle Pottery, was then used for the production of Johnson Bros pottery. Eagle Pottery closed in 2004 when production was transferred abroad; the works were demolished in 2005.Item is significant as today the "EMPRESS" china pattern from the 1930s by Meakin is today a collectable item and a good example of the Meakin range of china.Serving vegetable bowl with two handles on either end, plus a lid with a handle on the top lid also has a pattern around the edge.Inscription to base "J & G Meakin Manley England " warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, alfred meakin, staffordshire potteries, iron stone pottery, serving dish

Dr. Curt Schimmelbusch (1860-1895), a German physician, designed his original mask around 1889 while an assistant surgeon. Surgical assistants were often assigned the task of delivering the anesthetic. During anesthesia it was not uncommon for ether and chloroform to get onto the patient’s skin, causing irritation. Chloroform can even cause burn-like reactions. Schimmelbusch designed the rim of his mask so that both sides curve away from the patient’s face to form a kind of trough. He intended the trough-like rim to collect excess anesthetic that would otherwise have trickled onto the patient’s face. To anesthetize a patient, gauze was stretched over the metal bars and fastened in place by the hinge. The mask was placed over the patient’s nose and mouth, and the anesthetic was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. This type of mask is sometimes still used today for ether anesthesia in developing countries when other means are not available. (Wood Library Museum of Anesthesiology) This particular object is a modified version of Schimmelbusch's design, known as Chadborn's modification.Oval shaped chromium plated mask with two metal strips linked front to back and side to side to create a dome. An oval shaped mobile wire frame is attached to the lower part of the mask by a hinge at the back, approximately two inches from the lip of the metal handle. A "U" shaped bit of metal is attached to the front of the mask which acts as a clip to fasten the wire frame to the lower section of the mask.anaesthesia

Bushfire perimeter rather than bushfire area is the main control problem for firefighters on the ground. A conundrum rapidly compounded by spot fires. A small 5 ha fire can be nearly 1 km around the perimeter. That's a long way to build a control line by hand in rough bush. Dry firefighting techniques by hand were mostly confined to “knocking down” or “beating out” the flames, as well as "digging out". Digging or raking a “mineral earth” trail down to bare dirt proved most effective in forest fuels which, unlike grass, tend to retain heat and smoulder. Early tools were whatever happened to be close at hand. They were simple and primitive and included shovels, slashers, axes, hoes, beaters and rakes. A cut branch to beat the flames was often the only thing available. Farming and logging tools, developed over centuries of manual labour, and readily available at local hardware stores came into use, but little thought was given to size, weight, and balance. For years foresters experimented with combination tools. In about 1952 fire beaters and other implements were being replaced with Rakuts.Fire tool used before the introduction of RakehoesRakut - Fire Rake and cutting toolGreen and red coloured handle and 020 marking indicated which FCV District the tool belonged tobushfire

Worldwide, more than 100 million lambs are castrated, and their tails are docked each year. Numnuts is a technological innovation to improve animal welfare. It combines traditions with innovation. In the mid-1990s it was scientifically shown that the immense pain felt during castration and tail docking could be significantly reduced with the use of anaesthetic. For the next 15 years, the industry said the cost the welfare devices and development were too high. But todays ethical consumer has demanded that sheep have no more pain. Initiated in Glasgow in 2009, Numnuts took nearly a decade to develop. Here you can see five stages of development, from an early prototype to the Numnuts device farmers use today. Each phase of development took years of on-farm trails to achieve the final product. Today there is even NumOcaine, an approved local anaesthetic used by Numnuts. Using the simple elastrator ring and adding an anaesthetic injector, Numnuts delivers pain relief during tail docking and castration. In the world’s first rubber ring applicator with a pain relief delivery mechanism. Through innovation and consumer pressure the wool industry is going through a moment of rapid change.Four prototype numnuts tools made from white plastic and stainless steel, each in varying stages of production. FInalised version made with black, orange and clear plastics.8097.2 - Mk4 8097.3 - Numnuts Tool V7; 20 10 0 8097.4 - On label - Numnuts NumOcaine 100ml 65 proceeduressheep, tools, castration, innovation, docking

Worldwide, more than 100 million lambs are castrated, and their tails are docked each year. Numnuts is a technological innovation to improve animal welfare. It combines traditions with innovation. In the mid-1990s it was scientifically shown that the immense pain felt during castration and tail docking could be significantly reduced with the use of anaesthetic. For the next 15 years, the industry said the cost the welfare devices and development were too high. But todays ethical consumer has demanded that sheep have no more pain. Initiated in Glasgow in 2009, Numnuts took nearly a decade to develop. Here you can see five stages of development, from an early prototype to the Numnuts device farmers use today. Each phase of development took years of on-farm trails to achieve the final product. Today there is even NumOcaine, an approved local anaesthetic used by Numnuts. Using the simple elastrator ring and adding an anaesthetic injector, Numnuts delivers pain relief during tail docking and castration. In the world’s first rubber ring applicator with a pain relief delivery mechanism. Through innovation and consumer pressure the wool industry is going through a moment of rapid change.8098.1 - Numnuts tool made with stainless steel and black, orange and grey plastic. 8098.2 - Glass bottle with orange and grey plastic nozzle containing water for injection. 8098.3 - Yellow plastic case containing 12 stainless steel needles 8098.4 - 10 green plastic elastrator rings 8098.5 - Product cardboard box with the product image on the front8097.2 - on label - For animal treatment only WATER FOR INJECTION 100mL 8097.3 - On case - numnuts 12x Veterinary Hypodermic Needles On needdles - 18G 8097.5 - Numnuts targeted pain relief for tail docking and castrationnumnuts, tools, sheep, castration, docking

The Ballarat Trades Hall building is located at 24 Camp Street, Ballarat. The foundation stone was laid in October 1887. (Architects were Messrs James and Piper and builders were Messrs Lietch and Outtrim.) Over several decades, the façade of the building has fallen into disrepair and was posing a safety risk. Thanks to Victorian heritage grants and ongoing public donations, refurbishment of the façade is currently underway by Troon Pty Ltd. The photos in this entry show the deterioration of the building and the progress in restoring it to its former state. Progress catalogued by date: 13 February 2018 - 1 photo 19 February 2018 - 1 photo 23 February 2018 - 1-6 photos 5 March 2018 - 1-5 photos 12 March - 1 photo 4 April 2018 - 1-6 photos 18 April 2018 - 1-7 photos 23 April 2018 - 1 photo. The top of our restored building starts to poke out as the scaffold comes down level by level - the rendered wash-coat colour looks fantastic in the sun - as close as we can get to the original 1887 colour.The Hall is a community hub in Ballarat as well as being the point of contact and activism for unions and unionists in the area. These photographs are a critical part of the building's history.Photographs of Ballarat Trades Hall renovations. btlc, ballarat regional trades and labour council, ballarat trades hall, building, building fund, james and piper, lietch and outtrim, troon pty ltd, building - resoration, heritage victoria, grants

A group of widows at Legacy House preparing trays of rosemary to be given to the public on Anzac Day and worn as a sign of remembrance. The trays say "Rosemary, A gift from Legacy". 00602.2 the lady in blue holding a Rosemary tray is Gwen Gunn who was one of the organisers of the Rosemary trays for many years. Other names unknown. In The Answer in 1995 an articles says: "Operation Rosemary. Since 1982 Legacy ladies have volunteered to make rosemary sprigs for the Anzac Day marchers. At a later date they also made sprigs for the Schools Shrine Service. . . don't worry, there are ladies here to show you how to make them and it's a chance to hav a chat and cuppa whilst you work together. Any day day that you can spare . . . please ring Joan Miller." A note on yellow paper from 01046 explains the source of the rosemary. It says the rosemary donated to Legacy each year for the sprigs of rosemary handed out to the public comes from nurseryman, Peter Hannah, who sourced a cutting from a bush in Frankston which was said to come from a cutting brought home from Gallipoli by a wounded soldier.A record of widows preparing rosemary as gifts for the public. Rosemary is sign of remembrance. Colour photo x 3 of widows preparing trays of rosemary.widows, legacy promotion, rosemary, activities, gwen gunn

“The Bird God cult is the official lboriisi religion, but there are certain sections of the planet where people worship the sun - not the big Voidstar, but the smaller erratic red star, known as Lanturan on lrusag, and lisa, or “Womb of the Wave Stone” on Iboriis. The sun is thought to be the creator and controller of all things, both benevolent and capricious. Priest of the Sunworshippers sacrifice appropriately coloured fruits and vegetables to the Sun God to ensure continuity of crops and a rich, peaceful life. When the red sun disappears from the sky on its erratic orbit, the God is thought to be displeased and the people gather in great groups to pray for better times. It is at this time that the Sun dances are performed in specially prepared dancing grounds in the forests. This essentially peaceable religion is hated and feared by followers of the Bird God, so that Sunworshippers are hunted and destroyed whenever possible. It is considered a favourable omen if the year’s sacrificial victims can be Sunworshippers, a sure sign of a good future harvest. Naturally enough, Sunworshippers are never delegates to the Court — this Robe was smuggled out of lboriis by a team of dedicated anthropologist who risked their lives to study the Sun God religion.” -Inga Hunter

A document outlining the relevant by-laws produced by the City Of Kew to regulate the minimum size of allotments in Barkers Road, Burke Road, Cotham Road, Glenferrie Road and Studley Park Road, as well as in other streets more generally. The by-laws specify the size of allotments in which single unit dwellings, attached houses and maisonettes, and flats could be built. In the ‘main streets’ a minimum land area for single unit dwellings was 8,100 square feet, with an average frontage of 60’ and a depth of 135’. In other streets this was reduced to an overall size of 6,250 square feet, with an average dimensions of 50’ x 125’. In specifying the land area required by flats, different sizes were regulated for the construction of between two and six flats. Six flats at the time when the regulations were passed must have been the upper limit permitted. Understanding the size of land listed in imperial measurements can be a challenge. Within Australia, the so-called quarter acre block was approximately 11,000 square feet. Those specified in the by-laws would appear to be smaller. The document was pasted on the reverse of a subdivision plan in the collection.This is a rare (undated) document produced by the City of Kew defining how subdivision within the municipality should occur. The document was created to constrain unbridled speculation in subdivisions in the various parts of Kew and East Kew.Undated typed document, issued by the City of Kew (1921-1994) indicating the minimum size of allotment required in Barkers Road, Burke Road, Cotham Road, Glenferrie Road and Studley Park Road. The document is mounted on board and waterstained. It was presumably used by a real estate agent. [Formerly catalogued as MAP.0066].city of kew - by-laws and regulations, subdivisions - kew - studley park

It is identified as the home of J B Aird. The 2 women on the left are not identified. On the right are Mr & Mrs P Falconer and son Ron. Mrs Falconer was nee Aird. Research: 1917 electoral roll lists James Bromich Aird (optician), Sarah Ann Aird (HD) and Hilda Lillian Aird (tailoress) at 'Stratford', Croydon Road, Surrey Hills. Earlier electoral roll lists him in Ringwood and later ones at Wandin North. James Bromich Aird (1854-1938) and Sarah Ann Edwards (1858-1930) had 7 children. Emily Victoria Aird (1884-1957) and Hilda Lillian Aird were 2 of their daughters. Emily married Patrick Henry Falconer (1879-1964). Their son Ronald Keith Falconer (1908-1983) was born and died in Surrey Hills. James and Sarah Aird are buried in Box Hill Cemetery. Given the collecting focus adopted by Jocelyn Hall it can be assumed that this was taken at 'Stratford' in Croydon Road, Surrey Hills. Possible identification of the 2 other women in the photo would be Sarah Aird on the left on the deck chair and Hilda Aird on the bench with the Falconer family.Black and white photo of a family group of 3 women, a man and a young boy on the verandah of an Edwardian timber home. edwardian style, clothing and dress, ronald keith falconer, patrick henry falconer, miss emily victoria aird, mrs emily victoria aird, miss hilda lillian aird, james bromich aird, mrs emily victoria falconer, miss sarah ann edwards, mrs sarah ann aird, stratford, croydon road, box hill cemetery

Sometimes called a sweetheart postcard, it was a way of sending thoughts to the troops overseas. The poem on the front, with the image of a woman writing to her loved ones, says: "In distance we are far apart . . . / Yet loving thoughts can span the ocean blue / And warm good wishes sent in fond remembrance / Speed swiftly o'er the sea from me to you.' The British, Australian and French flags and Australia wattle provide more symbolism, the horseshoes for luck, and a hand shake. Was with other World War 1 memorabilia that has come from Private John Basil McLean, 2nd Reinforcements, 37th Battalion, A.I.F. There was a large collection of postcards so he may have been collecting them as souvenirs. J.B. McLean (Service No. 13824) was from near Maffra, Victoria and enlisted on 22 January 1916. He embarked on 16 December 1916 for Europe. His full war record is available from AWM. He spent time with the Australian Field Artillery (Pack Section). At the end of the war he worked for a year at the A.I.F. Headquarters in London before returning to Australia on the 'Ceramic', arriving in Portsea in 1920.A record of correspondence with the troops in World War 1 and sending good wishes with a hamper. This type of experience would have been familiar to the first Legatees as they had served in World War 1.Postcard with a lady writing and men fighting, horseshoes and wattle.world war one, souvenir

A group of widows at Legacy House preparing trays of rosemary to be given to the public on Anzac Day and worn as a sign of remembrance. Inez Bruce is the lady in apricot in all three photos, other names unknown. Date was probably 1989 or 1990. In The Answer in 1995 an articles says: "Operation Rosemary. Since 1982 Legacy ladies have volunteered to make rosemary sprigs for the Anzac Day marchers. At a later date they also made sprigs for the Schools Shrine Service. . . don't worry, there are ladies here to show you how to make them and it's a chance to hav a chat and cuppa whilst you work together. Any day day that you can spare . . . please ring Joan Miller." Photos were in a scrapbook of photos spanning 1983 to 1991. A note on yellow paper from 01046 explains the source of the rosemary. It says the rosemary donated to Legacy each year for the sprigs of rosemary handed out to the public comes from nurseryman, Peter Hannah, who sourced a cutting from a bush in Frankston which was said to come from a cutting brought home from Gallipoli by a wounded soldier.A record of widows preparing rosemary with Australian flags as gifts for the public. Rosemary is sign of remembrance. Colour photo x 3 of widows preparing trays of rosemary and Australian flags.widows, legacy promotion, rosemary

A group of widows at Legacy House preparing trays of rosemary to be given to the public on Anzac Day and worn as a sign of remembrance. The trays say "Rosemary, A gift from Legacy". The lady in blue is Gwen Gunn who was one of the organisers of the Rosemary trays for many years. Other names unknown. The widows clubs have been preparing trays of rosemary sprigs In The Answer in 1995 an articles says: "Operation Rosemary. Since 1982 Legacy ladies have volunteered to make rosemary sprigs for the Anzac Day marchers. At a later date they also made sprigs for the Schools Shrine Service. . . don't worry, there are ladies here to show you how to make them and it's a chance to hav a chat and cuppa whilst you work together. Any day day that you can spare . . . please ring Joan Miller." A note on yellow paper from 01046 explains the source of the rosemary. It says the rosemary donated to Legacy each year for the sprigs of rosemary handed out to the public comes from nurseryman, Peter Hannah, who sourced a cutting from a bush in Frankston which was said to come from a cutting brought home by a wounded soldier.A record of widows preparing rosemary as gifts for the public. Rosemary is sign of remembrance. Colour photo x 3 of widows preparing trays of rosemary and Australian flags.widows, legacy promotion, rosemary, gwen gunn

Used to measure the rate of rise of helium balloons The telescope is mounted on two movable axes. One axis (vertical) rotates to change elevation, the other (horizontal) azimuth. There are vernier scales and in some cases micrometres that give precise readouts of the relative position of the telescope to each axis. The instrument is set up so that it is level and it is pointed towards true north with both scales reading 0 degrees exactly. A balloon is released in front of the theodolite. It is sighted at timed intervals (usually one minute apart) and the position of the theodolite's telescope (azimuth and elevation) is recorded. It can chart the direction and velocity of winds at various altitudes The rate of ascent of a balloon is mostly dependant on the balloon's drag and its "free lift" (the vertical pull of the balloon). There is some degree of control over these these factors, and as a result, it possible to know approximately how high our balloon will be at any given time after its release. Given a known height and an angular direction (read off the theodolite) to the balloon, a fix is made of the horizontal movement component of the balloon's travel as it moves through different altitudes. The horizontal movement is due to the winds blowing the balloon around at the altitudes that the balloon is traveling throughTheodolite used to measure the rate of rising helium balloons The rate of rise is used in atmospheric calculations such as upper winds and determining inversion layersforests commission victoria (fcv), bushfire, weather

Newspaper Clipping - from the Melbourne Herald Sun Pictorial newspaper - 8/ 9/1928 about the derailment after running through the catch points of a maximum traction tramcar at the Riversdale Road level crossing the previous day 7/9/1928. The front bogie or truck has been torn from underneath the tramcar. On the rear is a report of a boxing match in Winnipeg the previous Friday, between NZ born Bert Brown and Vic Foley. A web search (boxrec.com/boxer/90347) accessed 1/11/2016 shows the match took place on 6/9/1928. A check with The Sun microfilm at the State Library shows the paper was published on 8/9/1928 Study of the photo, discussions with Norm Cross, particularly with regard to the positioning of the numbers; can see "12", the 2 being centred in the panel, indicates the other number could be a "1". Consultation with the record cards indicate it is most likely tram 121. See images i3. Released back in service 21/3/1929 after relatively expensive accident repairs. See Reg Item 6377 for other photographs.Yields information about the amount of damage to the tram following a derailment to a maximum traction tram at Riversdale Road in 1928.Newspaper clipping from The Melboune Herald Sun 8-9-1928 - not dated.tramways, tramcars, derailments, accidents, level crossings, riversdale road, tram 121, n class