Built in 1780 as the Berwick for the East India trade. She was badly burnt in a fire and was bought and rebuilt by the navy in 1786 and renamed 'Sirius'. After her arrival in Port Jackson, she remained as a supply ship and sailed to the Cape of Good Hope in October 1788 to obtain food supplies for the starving colony. After returning she was wrecked off Norfolk Island on the 14th of April 1790. Being 540 tons and skippered by Captain John Hunter. Model of the "HMS Sirius" first fleet

1888 Enfield modelweapon

Model of DC3 areoplane.ephemera, ww2, raaf

Model of Lake Bellfieldlake bellfield

Invaluable contribution to saving thousands of Servicemen's lives.During the Vietnam War the Bell UH 1Iroquois helicopter - nicknamed ( Hueys ) were responsible for the safe evacuation of military and civilian personel . It was the first turbine powered helicopter in service with the United States military . Wounded servicemen were ferried to field hospitals and vital cargo to where it was most needed plus being used for ground attack missions. .Wooden model of helicopter.

Model LM-10second world war (ww2), 1939 - 1945, eequipment/gear, ballarat rsl, ballarat

The SS ‘Edina’ is one of the most remembered vessels that plied the waters of Victoria’s Port Phillip Bay. Often referred to as the ‘Old Lady of Port Phillip’. Her active service included the North Sea trade, ‘Crimean War’, ‘American Civil War’, Victoria’s west coast run, New Zealand to Melbourne trade, Queensland coastal trade, and of course, the Port Phillip Bay runs between the years 1880 to 1938. ‘SS’ being an abbreviation for ‘Screw Steamer’ signifying that she was propelled by a steam engine rotating a single propeller, or ‘screw’ as it was know at the time.Model of a well known bay steamer operating in Port Phillip between 1880 and 1938.Model of SS Edinamodel, ss edina, screw steamers, port phillip, bay steamers

Detailed model of a corvette model ship painted grey, black and red. Its anchor and rudder are moveable.Roman numerals VIII-XIship model

Ship model Pioneer Melbourne M1 wooden ship model on 2 wooden stand. Single mast.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Model Bucyrus Dragline. Tracked bucket excavator. Green in colour. Model operator standing beside bucket.model, excavator

Slide. Model Aircraft. Brightly coloured model made from tin,surrounded by other craft items.slide, bendigo, model aircraft., model aircraft.

This is a ship model of the famous galleon the "Golden Hind". About the “Golden Hind” The English galleon “Golden Hind”, a mid-16th century Elizabethan warship, was launched in 1577. It was formerly known as the “Pelican”. The Golden Hind was the flagship of Captain Sir Frances Drake, in which he became the first Englishman to circumnavigate the world 1577-1580. Tonnage 100-150 tons Displacement 300 tons [fully loaded] Speed 8-15 knots Armament 22 guns Crew 80 sailors, 10 officers Built Aldeburgh, Suffolk, then moved to Plymouth, Devon in 1576 Type of ship Galleon; multi-decked ship (5 decks), square rigged, 3 masted sailing ship Estimated size Length - 70 feet (21.3m); Breadth – 19 feet (5.8m); Depth – 9 feet (2.7m) The Pelican set sail in 1577 on an expedition sponsored partly by Queen Elizabeth and Sir Christopher Hatten (whose family crest was a golden hind). His companion ships were the Swan, Marigold, Benedict and the Elizabeth. During this voyage, in 1578, Drake renamed the Pelican as the Golden Hind in honour of is patron. Sir Francis Drake [1544 – 1596] brought the Golden Hind home from his circumnavigation of the globe with looted gold, percelain, jewels and cash worth 35,000,000 million pounds in today’s money. It was the largest treasure every captured at that date. Only two ships returned – the “Golden Hind” and the “Elizabeth”. The ship model of the Golden Hind captained by Sir Frances Drake represents the first English circumnavigation of the globe.Ship model of the16th century galleon "The Golden Hind", Sir Francis Drake’s flagship (not in a glass case.) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model, model ship, galleon golden hind 1577, galleon golden hinde 1577, galleon pelican 1577, 16th century galleon, 16th century warship, sir frances drake, captain frances drake, first englishman to circumnavigate the globe

The Tudor Blocks sets included new blocks that were interchangeable with the other Lott's bricks, but had with one profiled surface with a single colour of paint on the raised surface, which gave the appearance of the panels of a wood-framed Tudor building, or of leaded windowsLarge cardboard box containing many blocks & four "trees". A book of illustrations of models. The Tudor Blocks sets included new blocks that were interchangeable with the other Lott's bricks, but had with one profiled surface with a single colour of paint on the raised surface, which gave the appearance of the panels of a wood-framed Tudor building, or of leaded windows.Lott's Tudor Blocks new series illustrations of models. Boxes 1-6, price1/6, Lotts Bricks Ltd, Watford England. Note: Price 1/6 means one pound 6 shillingstoys, lotts tudor blocks, building blocks

Product Identifier: K763.00017. This camera has a black imitation pigskin covered metal body with two finders, two pin flash contacts; shutter safety catch; tripod sockets and a cable release socket. This 1953-57 model has a horizontally striped front, plastic wind knob and release button and a triangular springback catch. (Film winder missing).Front: Brownie SIX-20 CAMERA / Model E / with flash contacts / MADE IN ENGLAND BY KODAK LIMITED. Inside back: Use Kodak 620 films, Shutter Synchronised for Flashbulbs. Class F or M.camera, brownie, kodak

The ship model of the Joseph Conrad represents the craft of ship model making, which has been enjoyed by many people over the years. Although the model is made from modern materials, it shows the elements of a sailing ship of a bygone era. Ship Model of the JOSEPH CONRAD: - The Joseph Conrad began as the iron-hulled sailing ship Georg Stage, launched in 1882. It was used in Denmark as a training ship for sailors. In 1905 while docked at Copenhagen the ship was rammed by a larger ship and 22 boys were killed while sleeping in the hull. The ship was later raised and on guard during World War I. Alan Villiers, an Australian author and sailor, rescued the ship and renamed it Joseph Conrad in honour of the renowned maritime author. In 1934 the ship visited Sydney on its worldwide tour, then in 1936 it was sold to an American, who later donated it for use again as a training ship. After World War II the ship was in disuse until 1947 when it was transferred to the Mystic Seaport for use as an exhibit. The author, Joseph Conrad (1857-1927): - Joseph Conrad was Polish-born and became a British subject in 1886. He was a renowned marine fiction writer and also, for a short time, a mariner and Captain. As a boy of 13 years old, Joseph Conrad’s desire was to be a sailor. At 19, he joined the British merchant marine, working in several roles. He eventually qualified as a captain but only served in this role once, from 1888-89, when he commanded the barque Otago sailing from Sydney to Mauritius. In 1889 he also began writing his first novel, Almayer’s Folly. He retired from life as a mariner in 1894, aged 36. Conrad’s visits to Australia from 1878 to 1982, and his affection for Australia, were later commemorated by a plaque in Circular Quay, Sydney. Conrad continued as an author. It is said that many of the characters in his books were inspired by his maritime experiences and the people he had met. By the end of his life, he had completed many stories and essays, and 19 novels, plus one incomplete novel titled ‘Suspense’ that was finished and published posthumously. Shortly before he passed away, in 1924, Conrad was offered a Knighthood by Prime Minister Ramsay MacDonald for his work but declined.The ship model represents the design of sailing ships built in the 1880s and can be used as a reference in understanding the construction of the ships of the Victorian era. The model's name is significant for its association of its name with the famed early 20th-century maritime author, Joseph Conrad.Ship model; A three-masted sailing ship named the Joseph Conrad, with cabins on deck, lifeboats, a ladder on the side and a figurehead on the bow. The hull is black at the top and red below. The ship's name is painted on both sides of the bow. JOSEPH CONRADflagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, joseph conrad, captain joseph conrad, maritime author, marine author, nautical author, sailor, seafarer, ship model, two-masted ship, iron hull, sailing ship, georg stage, 1882 ship, danish ship, training ship, boys killed, alan villiers, ship joseph conrad, mystic seaport, museum ship

Item brought home from Vietnam by Wesley Bertuch. Refer 1664.2 for his service history.Seiko wristwatch waterproof. The watch has a 24hr setting 12hr marked Blue 12hrs marked in red.“Model 6117-6410 s/n 070093”personal effects, seiko, watch, bertuch

Radio Set, green & white in colour, case made of plastic. Black & gold knobs. 'Electrice' brand. 'Model E 516M' on rear.radio, entertainment

Millers Falls Co. is a tool manufacturing company originally based in Millers Falls, Massachusetts. It was established in Greenfield, Massachusetts in 1868 as Gunn & Amidon by Levi J. Gunn and Charles H. Amidon. Gunn and Amidon, along with a third partner, Henry L. Pratt built a factory in the north of Greenfield. After the Greenfield factory burned down, the company was reorganized as the Millers Falls Manufacturing Co. It merged with Backus Vise Co. in 1872 to form the Millers Falls Co. In 1931 Millers Falls tools purchased the majority of the shares of Goodell-Pratt tools and merged with that manufacturer in 1932.In 1962 the company was acquired by Ingersoll Rand. In 1982, Ingersoll Rand sold the Millers Falls business to the newly created Millers Falls Tool Co. The company was head quartered in Alpha, New Jersey. Since 2002 the company trademark has belonged to Hangzhou Great Star Industrial Co., Ltd, of Hangzhou, China.An interesting an unusual tool made by the Millers Falls Tool company that continued to be featured in it’s catalogue up and till 1922. The tool was manufactured from 1897 until this date and is sought out by collectors of vintage tools.Universal Angular hand operated bit stock with spring type alligator jaws, main casting is Japanned bright parts are nickel plated item used with a bit & brace as an extension or angular borer. Millers Falls Co. USA Model 109flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tools, screw driver, angular hand operated driver, tool accessory

Used by donor's familyElectric cooker - slow - cylinder shape - orange with brown and yellow stripes. Glass lid - knob on lid. Controls - Off/High/Low. 'Crock - Cooker'. Two handles for lifting and three legs to support cooker off bench.Made in Japan. General Electric Model No. SC10domestic items, cooking

Electric powered, metal film projector, reel to reel, lens, and lighting aperture."Paillard" "Swiss Made" "Curant Model No. D.A."movie projectors

Memos - carbon copy on quarto paper - from the Publicity Officer to the Chairman regarding a window display in Victoria House London, dated 4/10/19?9? (Year only typed as a 9). Refers to a letter from Sir Norman Martin. Suggests two large photos of the SW6 trams exterior and interior, and the possibility of a scale model by Meadmore Engineering where Peter Duckett works and notes that Mr. Bell gave him recently a controller. Has a reference to Mr. Bell. Mr Risson commenced work on 1/10/1949 though in correspondence with Paul Nicholson, he felt that 1949 would be correct.Initialled by Lewis Russell.trams, tramways, sw6 class, london, models

The model depicts one of many sailing vessels to travel across the world for trade and migration in the 18th to 20th centuries. The craft of model making is also represented by this model. There are many craftsmen with a fascination for the sea and objects connected to it.Ship model, the sailing ship "General Gordon", in a glass and timber display case. The model is of a four masted Barque with the royal sails over double top and top gallant sails. Inscriptions are on the model. Marked "General Gordon" on side of ship and on red pennant. Flag with crab on one side and shell on other. Union Jack. Red ensign.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, general gordon, ship model, barque, sailing ship, vessel