Queen Elizabeth II reigned for over 70 years (1952-2022). Following her funeral in September 2022, the Herald Sun produced this lift out reporting on Her Majesty's funeral in pictures.12 pages of reports and colour and black and white images.queen elizabeth ii, royal family

Proudfoots’ Boathouse was built in 1885 by Thomas Proudfoot and has remained an important historic building in Warrnambool to this day. In the late 20th century the original buildings were lifted and renovated and a new building constructed in front. This material on Proudfoot’s boathouse will be of considerable use for researchers on the buildings, especially the detail on the 1990s renovations and additions.This is a Warrnambool Secondary College school assignment (Claire Isaac) about Proudfoot’s Boathouse in Warrnambool. There are twelve unnumbered typed papers on white paper (A4 size) and five loose newspaper cuttings. The typed pages are outlined in red. Included are black and white photographs (copies) and colour photographs.proudfoot’s boathouse, claire isaac

Metal toe bindings clipped onto specially made boots with 3 holes at their toe on the sole enabling the cross country skier to be attached to the skis and to be able to lift their heel when skiing on flat ground.These bindings were used by skiers on the Bogong High Plains.Blue and white metal toe ski bindings with white toe clip and 3 blunt 'nails' sticking up at the front to enable a boot with 3 holes in the sole to fit on them. Two holes in the steel enable it to be fitted onto the ski. The sides are at angles narrowing towards the front."nordic norm 75 / ski lom / made in norway" inscribed between the nails and holesski bindings; bogong high plains; cross country skiing

(Kangaroo Ground-St Andrews Road) “Rymers” Corner – shifting Hawthorn hedges on Tompkins property Council’s Drott 6 Woods Drott 9 August 1960 Showing method of lifting clumps of HawthornRecord of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, shire of eltham, 1960-08, garden hill, kangaroo ground, kangaroo ground-queenstown road, kangaroo ground-st andrews road, rymers corner, bulldozer, drott

(Kangaroo Ground-St Andrews Road) “Rymers” Corner – shifting Hawthorn hedges on Tompkins property Council’s Drott 6 Woods Drott 9 August 1960 Showing method of lifting clumps of HawthornRecord of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, shire of eltham, 1960-08, garden hill, kangaroo ground, kangaroo ground-queenstown road, kangaroo ground-st andrews road, rymers corner, bulldozer, drott

This is a general newsletter produced by Loyola College and distributed to parents. In this edition the front page article and 4 page centre lift out deal with the ongoing bid to protect the former Loyola seminary from demolition.Loyola, a Jesuit seminary in Watsonia was opened in 1934, with Loyola College, a Catholic secondary school opening in 1980 on 4 acres adjacent to the seminary. In the early 1990s the College was keen to take over the seminary buildings. 8 page newsletter. Printed in black on white paper (discoloured). Title of publication is printed in red. Complete volume available at GHS.loyola college, loyola seminary watsonia, ignatian

This compressor was part of the E.G. Ward Collection. It is connected to the diving suit and boots also in our collection. Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water-pumps, refrigeration equipment and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12 bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air and under the sea (including mine rescue, tunneling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman fortunes began to decline as an ageing Sir Robert Davis failed to invest, or change the company business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr. E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998).The compressor is a very significant item as it gives a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. Siebe & Gorman the company that made the equipment was a leading inventor, developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job during the early days of marine exploration.A single cylinder divers' pump by Siebe Gorman & Co Ltd, London, eccentric hand cranked in brass mounted mahogany case with instructions to the underside of the lid, brass covered pressure gauge and air outlet, brass makers plaque to the front, water inlet and outlet to the rear, green painted lifting rings. Machinery has some blue painted areas on the metal.Plate on the back 'WATER SUPPLY" "WATER OVERFLOW" "WATER DRAIN-IN" Pressure gauge dial "BOURDON'S PRESSURE GAUGE" STEBE GORMAN & CO. LONDON", "LBS PRESSURE" "FEET OF SALT WATER" Plate on the front " PATENT, Siebe Gorman & Co Ltd Submarine Engineers" below emblem (Lion, Crown, Horse)flagstaff hill, warrnambool, flagstaff-hill, maritime-museum, diving compressor, london, siebe gorman & co ltd, marine technology, life saving, deep sea diving, maritime museum, maritime village, manine history

Teaching aid to measure weight.Plastic yellow base and T shaped stand. Stand can be lifted off base. Base is 'rectangular' with each side curving inwards. Apex of T has steel rod enabling the cross arm to move. Each end of arm has a hole with steel ring attached. Also in ring are the end of 3 chains hanging down and attached to white enamel plates.Embossed on upright 'Invicta / Simple Scale' mt beauty primary school, teaching aid, mathematics, scales

See Cat 4799 for dataEmbroidered postcard. It has a white cardboard embossed frame. The embroidered pattern is of green leaves, white and red flowers. At the bottom is embroidered "To my Sister". That is in a silvery white. The flower arrangement is an actual flap, lifting that flap is a small card. On that card is a seated British soldier in war torn trench talking to a little angel. The transcription is "Tell her that I love her".The letter side is written in faint pencil. It is headed - France 12 /1/17. Dear Sister ............... It finishes up with "Love to all, Joe". A lot of the writing is hard to see.ww1, postcard

A novelty postcard with pull-out strip of 11 miniature photographs that was produced by the Valentine Publishing Co as a souvenir of Marysville.A novelty postcard with pull-out strip of 11 miniature photographs that was produced by the Valentine Publishing Co as a souvenir of Marysville.Having a Thrilling Time/ at MARYSVILLE 1765 PRINTED PAPER/ MAILING NOVELTY/ SHAPE PASSED BY THE G.P.O./ FOR PRINTED PAPER POSTAGE RATE/ Only Name and Address of Sender Allowed/ If any other writing, Letter Postage is required/ TO OPEN RAISE FLAP From VALENTINE'S "MAIL NOVELTY" POST CARD. COPYRIGHT Printed in Great Britain Shape Passed/ by G.P.O./ for/ Printed Paper/ Postage Rate/ 34-2 Tomarysville, victoria, postcard, souvenir, valentine publishing co, acheron way (image 1), keppel's falls (image 2), cumberland falls (image 3), stevenson falls (image 4), mount margaret (image 5), main st (image 6), nicholl's lookout (image 7), the old ford (image 8), the acheron way (image 9), taggerty river (image 10), the road to cumberland valley (image 11)

A4 size photocopy of a photograph and accompanying text of SEC Ballarat No. 11 being unloaded at BTPS's temporary storage shed in Smythes Road, Sebastopol on 11/8/1977. Tram had come from Daylesford Historical Society. Has photograph of tram being lifted off the truck. Date of item 11/8/1977. Not known who made photocopy or when.trams, tramways, daylesford, sebastopol, temporary storage, acquisitions

Yields information about the ESCo tram fleet after the initial operations, fitting of destination signs, tramcar numbers, crew uniforms and appearance of Wendouree Parade, c1906, Black and White photograph of No. 40 being lifted onto a truck in Wendouree Parade, at the old loop, 29/11/1979, to go to Melbourne - see page 2 of November 1979 Fares Please! and email (Other information) from Peter Winspur dated 24/07/12 for further details. The Courier Ballarat photo. See December 1980 Fares Please!Has The Courier stamp on rear.trams, tramways, btps, moving trams, tram 40

A part of a yearly marketing and information material promoting Falls Creek ski region for the winter holidays, this brochure includes a lesson timetable planner and booking details. It was produced by Falls Creek Ski Lifts Pty Ltd.This item is important because it documents seasonal activities at Falls Creek Alpine ResortA small brochure including a lesson timetable and Family Ski Holiday Plannerfalls creek marketing, ski lesson timetable, falls creek winter programs, falls creek school holidays

Full history available at:- https://www.facultyoffice.org.uk/about/history/ From the Faculty Office of the Bishop of Canterbury. Figures on the seal represent Moses lifting up the brazen serpent, with the motto ‘Mundus transit’ and the Arms of the See of Canterbury.Facility Seal: Cream Card Seal with the words *HIS.GRACE OF * CANTERBURY *BY STATUTE*OF*HENRY*THE EIGHT*FACULTY*SEAL. The Seal has been embossed with a T in the centre with a snake entwined. On either side are two figures each side looking up at the snake. Underneath is a shield with Y in the middle. The seal has eight sides with the embossing in a circle. Box 625ephemera, mementoes, marriage licence seal.

Photo of the installation of an electric arc type street lamp in Lydiard St North, near the Provincial Hotel Ballarat. The tower wagon is drawn by a single horse. Two boys standing alongside while two men are on the top of the wagon, a man on the top of the ladder is positioning a lifting beam while two men on the ground hold the rope for this beam. On the side of the wagon is possibly an extension that could be lifted onto the top of the tower itself to give a greater working height. The buildings between Mair St and the railway station on the west side of Lydiard St North remain in position. Yields information about the methodology of the late 1890's to install street lighting in BallaratDigital print of a Positioning street lights Lydiard St North Ballarat late 1890sarc lamps, ballarat, lydiard st north, electric lighting, tower wagons, horses, workmen, street lights

Queen Elizabeth II reigned for over 70 years (1952-2022). Following her death in September 2022, the Herald Sun produced this lift out "Tribute Magazine", reflecting on Her Majesty's life in pictures and articles.A 'Tribute" magazine, 24 pages of reports and colour and black and white images.queen elizabeth ii, royal family

Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top (broken). Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box, usually for a glass bottle but which is holding a metal pourer. The rest of the kit is missing.Printed in gold leaf on inside lid of box: MAYER & MELTZER / LONDON / MELBOURNE & CAPE TOWN Stamped on underside of metal pourer: BARTH & CO / LONDON Handwritten on inside of lifting linen-covered paper: [indecipherable] d as described on Pawn-Ticket / January 1903 / Jacket / Boots [cont...]mayer & meltzer, barth & co

Also black and white photograph of a motor van being lifted by Whiter Street Cranes after being purchased by auction from Standerwicks Vehicle Museum in November 1994 number 03756.1 size 10 x 12.5 cmBlack and white photograph of four wheeled wagonette one of the items from Standerwicks Vehicle Museum up for auction with a paddle wheel from P S Tanjil leaning against a wall in background Lakes Entrance Victoriabusinesses

This book belonged to Evan Jones, a plasterer and stone mason from Warrnambool (born 1865). He and the Rev. Norman Crawford, the Curate at Christ Church, Warrnambool, began the first Boy Scout group in Warrnambool, the 1st Warrnambool Troop. When Baden Powell, the founder of the Boy Scout movement, visited Melbourne he presented Evan Jones with his scouting medal. The Boy Scout movement has been active in Warrnambool for over 100 years and currently there are two troops operating in the city - Warrnambool Tooram Scouts and Warrnambool Norfolk Scouts Evan Jones was also a Sergeant in the Warrnambool Garrison Artillery (a Volunteer Corps) and this partly explains his ownership of this book and his interest in military scouting. This book is of minor interest as an example of the type of book available early in the 20th century on military scouting. It is also of interest as a book belonging to Evan Jones, the co-founder of the Boy Scout movement in Warrnambool. This is a small book with a buff-coloured cardboard cover. It has red lettering on the front cover which is partly torn away at the right bottom edge. Many of the pages are also stained and torn away at the edges. The text includes sections on military patrolling in general and a section describing military patrols in the Boer War. There are several lift-out pages of sketches of patrols. The inscription is handwritten in pencil. S.M. Evan Jones, 1st W’bool Troop.’ warrnambool scout troops, evan jones

This large deep pan (with a long handle) was used by pioneer families, mainly rural folk, that needed a pan which could cope with an open fire heat source, in or mainly outside the homestead. This pan was used in the early to late 1900's for the "stews" and other meals required by hard working stock men and farmers that had irregular "lunch and dinner" breaks under sometimes hard and gruelling conditions. Hot plates were normally not in use.This "open fire" saucepan belonged, and was used by a Kiewa Valley, pioneer family, the Roper Family. This saucepan was moved from their Kiewa Valley property to their hut built on the Bogong High Plains. This saucepan was one of an array of "open fire" cooking utensils used in the "camp draft" grazing in the Bogong High Plains and this could take up to six weeks. This kettle belonged and was used by a Kiewa Valley, pioneer family, the Roper Family. This kettle was moved from their Kiewa Valley property to their hut built on the Bogong High Plains. A scientific study started in 1947 to study the impact of grazing cattle on the natural Alpine and sub Alpine vegetation found grazing cattle had an adverse affect on the natural Alpine and sub alpine vegetation, and grazing on the plains was stopped by the Victorian Government in 2005.This large (black, soot infused) cast iron saucepan has a "ten pint" holding capacity and was used on the "open fire", possible on the fire direct. It has a long all metal handle coming from the top half of the pot and angled at approximately sixty degrees upwards. This angle insures that both distance from flame intensity and least bending of knees when lifting is at a minimum.On bottom of pan (underside) "N0. 8 JSJ SIDDONS" on the other side "WEST BROMWICH 5 QUARTS"camp fire cooking utensils, hot plate, cast iron cooking appliance, drovers kitchen

A novelty postcard with pull-out strip of 9 miniature photographs that was produced by the Valentine Publishing Co as a souvenir of Marysville.A novelty postcard with pull-out strip of 9 miniature photographs that was produced by the Valentine Publishing Co as a souvenir of Marysville.FOR LUCK from/ MARYSVILLE 1852 VALENTINE'S/ MAILING NOVELTY From VALENTINE'S "MAILING NOVELTY" POSTCARD. COPYRIGHT. Postal Rates/ within Australia Enclosed in/ Envelope 2 1/2"/ Sent Open/ with only/ Name and/ Address of/ Sender 1 1/2 Mt Kitchener House/ Marysville/ 31.1.51 Dear Nancy & Albert/ Well I thought that while I had a/ chance I would drop you a few lines to/ let you know that we are having a good/ time. I read in the Herald last night about/ Uncle Will's death, but he had suffered such/ a lot, that I guess he is better off. When/ Dad & I went to see him last Tues week/ he really looked dreadful. This is a very/ nice place to stay the meals and accommod-/ ation is very nice & they are a very nice/ crowd staying here. Beryl & I went to Alexander/ yesterday with some friends of Beryl's and tomorrow/ we are going the Reefton Spur trip, ? and the Eildon Weir/ trip and then Frid the Cumberland Valley Trip./ Well I must close so for the present lots of Love/ Violetmarysville, victoria, souvenir, postcard, valentine publishing co, cumberland valley road (image 1), taggerty river (image 2), acheron way (image 3), the old ford marysville (image 4), nicholl's lookout (image 5), main street marysville (image 6), mount margaret (image 7), stevenson falls (image 8), cumberland falls (image 9)

The souvenir packs of cards open up with various photographs inside. Five are published by Nucolorvue Productions, Mentone, Victoria. One set by Murray Views, Gympie, Queensland. Two sets by The Valentine Publishing Co. Pty.Ltd Melbourne. One set of Colour Photographs by Capt.Frank Hurley. The single postcard is by Valentine's "Mail Novelty" Post Card Copyright. One is addressed to 'Mrs. H. Ellis c/- Mr. E. M. Straw, Harcourt, Vic.'Nine packages of photo souvenir postcards from various Australian cities and towns and one single postcard of a Scottie dog peering out of a doorway. It has a lift up flap with mini folded photographs of Lakes Entrance underneath. Other phoyogtaph selected views and fold out photograph packets of: Sydney, Warrnambool, Mildura, Albury, Shepparton Murray Valley, Orbost Adelaide Hills. The Scottie dog card has handwritten in blue ballpoint pen on the back -' You owe me 5/-' All other sets have the publishing details and a description of the area on the back.postcards, photographic postcards, postal stationery

Yields information about how bogie trams were transported to Ballarat from Geelong and then received into the depot and offloading the bogies.Digital image from the Wal Jack Ballarat Album of photographs of Geelong No. 40 bogies being off loaded by Yellow Express Crane from the delivery truck in the depot yard, Wal Jack photo 29-3-1956. Became Ballarat No. 43 - see Reg Item 5345 and 7786 also. . See image i2 for rear of photograph. See image i3 for hi res scan of print. See image i4 for hi res scan of negative On rear in blue ink "SEC Ballarat No. Yellow Express No. 10 crane, lifting No. 1 end bogie off Yellow Express Road transport, (No. 40 ex Geelong) Wendouree depot 29-3-56" with Wal Jack stamp in top right hand corner with number "T231" written in.trams, tramways, delivery of tramcars, bogie trams, depot, tram 40, tram 43

This Trotman’s pattern stock anchor is the southernmost anchor on display at Flagstaff Hill’s Anchor Graveyard. This large Trotman design anchor was patented in 1852 by John Trotman and was widely used on merchant ships. On April 15th 2001 around midday this anchor was raised from the seabed of Lady Bay, Warrnambool, by the crew from Birdon Dredging, who had been hired to dredge the Harbour. The spokesperson Steve Walker, who worked for the firm, said that the anchor and long chain were found after the chain became tangled in the cutter blade of the dredging equipment. The anchor was lifted from the water and onto the Breakwater then a front-end loader placed it onto a truck that then delivered it to Flagstaff Hill Maritime Museum & Village. Howard Nichol, Museum Manager at the time, had estimated the anchor to be up to 130 years old. The previous Museum Manager, Peter Ronald, who was also a diver, had identified the anchor as a Trotman’s type and similar to those used on some of the major wrecks in the region. According to Nicholl, Museum staff believed it was possible that the anchor is one of two used as a mooring line that had been used to catch driving vessels and prevent ships from washing aground on the sand bar. The mooring line was shown as a dotted line on the 1890 chart of Lady Bay, approved by Lieutenant Stanley of the British Admiralty. by Lieutenant Stanley [British Admiralty]. The location of the anchor corresponds to a point on that map and the length of the chain supports that theory. “The map is quite a detailed survey of the Bay and it shows two anchors with buoys on the ends with probably about 100 yards of chain stretched between them. The ships would drop anchor and was the chain as a snag because this was a treacherous bay before the Breakwater was built and this was a way to eliminate that problem, "said Nichol. The mooring chain was put in place to catch drifting vessels during wild stormy weather. It was identified. ABOUT TROTMAN’S ANCHORS- The British Admiralty wanted an anchor design that had more holding power. The Committee of 1852 on Anchors was appointed to assess and report on the qualities of various anchors including Trotman’s anchors. Trotman’s pattern anchor received the highest score. The anchor is similar to the Admiral’s design but features arms that pivot when the anchor settles and the upper fluke moves to rest against the shank. The anchor then sits lower, which in turn greatly reduces the chances of the anchor’s chain, cable or rope getting tangled. The top of the shank has a fitting that allows a quick release of the anchor’s chain if this becomes necessary. This Trotman’s anchor is significant as a part of the maritime history of the Port of Warrnambool regardless of whether it belonged to one of the 29 ships that were stranded or wrecked in Lady Bay. The anchor is connected to the many attempts to maintain Warrnambool as a safe and manageable port, including the various plans for the construction of the Breakwater.Anchor: an iron Trotman’s pattern style with a rectangular-section shank that is wider in the middle and has a base that extends on two opposite sides in a ‘fork prong’ manner. A crescent-shaped, double-ended arm is fitted into the base of the shank with a bolt, enabling it to pivot. Each arm has a fluke in the shape of an upward palm with an attached metal plate that forms a horn at the back of the palm. A long, round-section pipe is fitted to the top of the shank at 90 degrees to the arms; one side has an elbow bend parallel to the arms, and both ends have an attached metal sphere. The pivoting ring at the top of the shank can be lifted for a quick release of the chain.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, anchor, mooring, trotman, lady bay, breakwater, admiralty, ship equipment, stock anchor, john trotman, 1852 patent, 2001, birdon dredging, steve walker, howard nichol, peter ronald, british admiralty, lieutenant stanley, committee of 1852 on anchors

Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse. His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large rusted iron pulley, large loop at one end and smaller loop at the other. No hook.(Sheave Block)

Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.180 The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse.His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large iron pulley with loop at one end and hook at the other, rusted.

953.1 - photo of tram 32 being lifted and a low loader being positioned under the tram. Appeared on page 1 of Courier. Caption notes as the last tram to be given away and Mr. Bob Davies directing the move and that he has assisted in many of the moves so far. 953.2 - continuation of page 1 item on page 2 - about tram 32 being give to the Maryborough Chamber of Commerce. Mentions trams in the care of the BTPS, Lake Goldsmith and other organisations. Quotes SEC Administrative Officer Mr Norm Pearson. 953.3 - as for .1 and .2, but entire front page from The Courier. Additional copies of 953.1 and 953.2 added 30/05/06 ex Leslie Dawson. 953.4 - Black and white Courier photograph print of the photograph of No. 32 being lifted. 953.5 - Black and white Courier photograph print of No. 32 being lifted off the truck with No. 30 in the background .4 and .5 - Print of original photographs added 14-3-2016 from the donation to the Museum by Karelyn Satter Feb. 2016. Stored in box 01-01-84Yields information about the storage of trams at the Ballarat North Power Station following closure of the SEC operated tram system, period to delivery of the tram to its next owner. Has a strong association with the crane company of the time.Newspaper clippings from The Courier, dated 17/3/1973dates in blue ink of "17/3/73" near top right hand corner of both cuttings., Prints have the stamp of the Ballarat Courier on the rear.trams, tramways, maryborough, tram disposal, secv, tram 32