Showing 945 items matching "job"
-
Victorian Farmers Federation
Photograph - jpg image, Lisa Gervasoni, Stop Ausnet Rally Ballarat, 15 July 2022
VFF is seeking an appropriate framework to ensure farmers do not bear the cost of infrastructure on their farms. Overhead powerlines are proposed through the rich volcanic soils around Ballarat. This land supports 1200 jobs in processing in Ballarat. The towers would impact on the ability to irrigate crops, to use tractors around them, on biosecurity and on ability to use emergency equipment near them. VFF wants assurances that the managing entry to farm policy position will be adhered to and that a statewide strategic plan for renewable energy is prepared. https://www.vff.org.au/wp-content/uploads/2021/09/PS210901LG-Managing-Entry-to-Farms-adopted.pdf https://www.vff.org.au/wp-content/uploads/2021/09/VFF-Renewable-Energy-and-Energy-Efficiency-Policy-Statement-Meeting-172-June-2021.pdfphotos of Lydiard St Stop Ausnet Rallyadvocacy, renewable energy, farmers, protest, rally, managing entry to farm, victorian farmers federation, ballarat -
Victorian Farmers Federation
Film - mp4 clip, Stop Ausnet Rally Ballarat Katherine Myers VFF speech
VFF is seeking an appropriate framework to ensure farmers do not bear the cost of infrastructure on their farms. Overhead powerlines are proposed through the rich volcanic soils around Ballarat. This land supports 1200 jobs in processing in Ballarat. The towers would impact on the ability to irrigate crops, to use tractors around them, on biosecurity and on ability to use emergency equipment near them. VFF wants assurances that the managing entry to farm policy position will be adhered to and that a statewide strategic plan for renewable energy is prepared. https://www.vff.org.au/wp-content/uploads/2021/09/PS210901LG-Managing-Entry-to-Farms-adopted.pdf https://www.vff.org.au/wp-content/uploads/2021/09/VFF-Renewable-Energy-and-Energy-Efficiency-Policy-Statement-Meeting-172-June-2021.pdfphotos of Lydiard St Stop Ausnet Rallyadvocacy, renewable energy, farmers, protest, rally, managing entry to farm, victorian farmers federation, ballarat -
Melbourne Legacy
Document - Document, newsletter, Weekly Bulletin 1932 (H50), 1932
An early example of Melbourne Legacy Club newsletter (No. 265 16/2/1932), covering the activities of Melbourne Legacy Club. Information includes speakers for the weekly Tuesday meetings, the opening of the new Club Rooms at 55 Market Street by the Lord Mayor, personal news of Legatees, and a considerable amount of space devoted to job placement for Junior Legatees, which was proving problematic for boys over 17 years of age. There is also a report by the Chairman of Committees on the activities of the Club, news from other clubs, and a clothing appeal. The overall tone is chatty but informative and the dedication to the welfare of Junior Legatees is obvious. A further sheet is appended with limericks to accompany the concert on 15 March at the Auditorium by Junior Legatees and Legatees, which was held to raise money to equip the new premises..Brings to life the work of Melbourne Legacy in the early years.White foolscap pages with black type x 5 pages of a newsletter for legatees.'H50' in blue ballpoint on page 1.newsletter, founding legatee -
Nillumbik Shire Council
Painting: Brian ARMSTRONG, Brian E. Armstrong, Duet, 1978
Brian was born in Melbourne in 1949. Early life was spent in the stimulating bush environment in Montrose. Ramon Horsefield saw a spark and Brian began to paint in oils at the age of thirteen. He contunued tuition with Graham Moore, in class and at night classes. An Art Diploma at Swinburne was not completed. This did not crush his creative spirit and he resumed tuition with Graham Moore. Within a few years he was winning prizes. Many and varied jobs allowed him to survive whilst aspiring to become a full time painter and bring up his growing family. In 1977 Brian resigned from his last employment as a picture framer. He leased a shop in Main St, Mornington and set up classes. Brian taught painting and had his own studio behind the school. Later he was to move and build his "bushland gothic" home in North Warrandyte. Here he developed his reputation as a painter. Brian had his first solo exhibition in 1979. Many more were to follow. He has won many prizes, was a finalist in the 1992 Moran Portrait prize. The Alice Bale Scholarship which he won, entailed a year traveling and studying in Europe. Brian returned home in 1996. Sharing his skills with many students over the years, he taught privately and at various art societies. His oils, pastels and charcoals capture the light of landscape, portrails and nudes. In 2012 it will be thirty-five years since Brian has had a "real job". At times this has been really difficult. He is now semi retired after suffering from Rheumatoid Arthritis for a decade. Now he paints what he loves to. His portraits capture the very essence of the sitter. In 2009 he remarried and moved back into the bushland of North Warrandyte. 'Duet' by Brian E. Armstrong was donated by the Artist to the Eltham Copper Butterfly Appeal Auction.Oil on canvas painting depicting a 'Duet' scene with two children. One is shown playing the flute whilst the other is playing the piano. The painting is fashioned in sombre colours and muted tones, with alternating tones of violet prominent.Signed- Brian E. Armstrong '87 On label - artist's name: Brian E. Armstrong Address: 844.2925 Title of Painting: Duet Medium: Oil on canvas On Frame: 82 enclosed in circle. 31 1/2. C Enclosed in circlebrian e. armstrong -
National Wool Museum
Textile - Quilt, 1921
Now 100 years old, this quilt belonged to the donor’s grandfather John William Huffstutter. John was Born in 1898 in a log cabin in the Ozark mountains of Missouri, USA. Tragically, John’s mother died when he was four years old. John said that he could always remember her voice calling his name as he hid under the porch in one of the many thunderstorms that frequent the area with his dog. John was raised by his grandmother and was treated as the youngest to her other children, growing up with his aunties and uncles rather than brothers and sisters. John began to study engineering at the State University of Iowa before serving in the US Army Engineer Corps in The Great War. He enlisted when he became eligible and served briefly before the Great War ended. He then returned to his engineering studies in Iowa, and shortly after finishing his studies got his first job with Westinghouse in Pittsburgh at age 23. It was when John was leaving for this job that he was given the quilts as a reminder of home from his grandmother Sarah Jane "Sallie" Tindall Coble, and her daughter (John's Aunt) Ottie Maude Coble Bittick. Widowed at age 78, John took to sleeping in his screen porch under one of these quilts. John remembered one winter in Missouri waking in his log cabin to find snow covering him and his quilt. When he died at age 94, the quilt he used was completely worn out and discarded. This remaining quilt was shipped to Australia, where Carol’s (the donor) immediate family had emigrated in 1970. Opening the box that contained the quilt released a wave of comforting smells, emotions, and a flood of childhood memories. Carol distinctly remembers sleeping under these quilts for afternoon naps at her grandparents' house. The quilt is 74 x 80 inches (1880 x 2030mm), matching the size of a modern-day king bed. It is made of various four-inch (100mm) squares. These squares are made of old men woollen suits in dark colours of browns and greys. The quilt is layered with a wool backing fabric and a batting lawyer of unknown material, possibly cotton or wool. The quilt is tied together with red wool yarn and the backing fabric is folded over the edge to be used as a binding. Embroidered across the front of the quilt in purple wool yarn is "John Huffstutter", "13 Oct 1921". A small, printed cloth label "HUFFSTUTTER" is pinned on the reverse of the quilt. The quilt is well-worn but in good condition considering its age. The care instructions passed down by word of mouth with the quilt were to "never wash, only air".Front embroidered. Purple handstitching: "John Huffstutter / 13 Oct 1921" Reverse. Printed cloth label: "HUFFSTUTTER"ozark, missouri, usa, textile history, quilt heritage -
Falls Creek Historical Society
Equipment - Martin Romuld's Skis
Martin Romuld was born near Trondheim in Norway on September 26, 1905. He started jumping on skis at age 6 or 7 and became very good at it. He completed his degree in Civil Engineering at the University of Trondheim and decided to come to Australia. He arrived on 7 March 1928 and found a job with the SEC. The SEC wanted to investigate the possibility of a hydrological surveys necessary to determine the flow of water over a period of years. These surveys started in 1934 and continued until 1941. He lived at Wilkinson’s hut for most of the time during those years both in summer and winter. In his role with the SEC, Martin visited all the various creeks to measure water flow rates as often as was necessary. These skis were used on his winter rounds during the time he spent in the area. Martin also competed in skiing during the 1930s. He won the combined Australian title 3 or 4 times. He was unbeatable in cross country, probably due to the continual practice in his job. Before migrating to Australia, Martin had been runner up in the 1926 European Jump Championships held in France. Jumping was his favourite thrill and he would often construct a jump for practice near the Scout Hut (or Rover Chalet) quite near to Wilkinson’s. In 1941 Martin joined the Royal Australian Air Force and after the War skied mainly at Mt Buller. He maintained his involvement in competitive skiing as an official. In 1958 Martin was the main judge of the National jump which was held to the left of the Nissen tow. He also designed the jumping course at the Donna Buang snow fields. Martin Romuld was Co Vice-President of the Federation of Victorian Ski Clubs in 1949, along with Tom Mitchell M.L.A. Martin Romuld died on 14 July 1998 in Prahran, Victoria,These skis are significant because they belonged to a pioneer of Falls Creek and the sport of skiing in Australia.A set of skis made for Martin Romuld. They are made from American hickory which arrived in Australia via Norway in October 1933. Andy Broad made the skis and they were furnished with steel edges. There was enough hickory for 18 pairs of skis and a pair of competition cross country skis were also made for Martin Romuld. martin romuld', falls creek pioneers, australian skiing history -
Flagstaff Hill Maritime Museum and Village
Tool - Mitre Saw Set, 1930-1955's
This Bodmann mitre saw set was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. ABOUT the BRAND NAME ON THE SAW - BODMANN and CO, Germany In 1927 the Brisbane Courier Mail described Bodmann and Co of Reinscheid, Germany as "manufacturers of guaranteed tools and hardware. It appears that at least the saw has been re-badges and sold by Bodmann because (1) there are remnants of a label on the saw blade similar in shape to the Bodmann label on the mitre set (2) the removed label reveals the name and logo of "ULMIA Schutz OTT Marke" (3) one of the "Bodmann" labels on the saw handle has been applied in a crooked manner, almost leaving off the last "N". ULMIA is a German manufacturer of high quality woodworking tools. A drawing of a very similar mitre bset with saw can be seen on the ULMIA website. In 2002 the long established company ANKE of Swabian Alb, Germany (makers of cut timber, workbenches and countertops) bought out the name and trademark rights of ULMIA. HISTORY OF SOVEREIGN OF THE SEA (brief) Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the Jim Williams. This mitre saw set is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This mitre saw set was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Bodmann Mitre Saw set model 348, comprising metal, adjustable mitre saw on timber stand, and metal hand saw with Bakelite handle. The mitre saw is labelled with the trademark of Bodmann, Germany, and stamped with the model number 348. The saw has Bodmann trademark badges on each side of the handle; the text on one of these badges is not quite aligned. The saw blade has remnants of a label under which the stamped logo of ULMIA Schutz OTT Marke is clearly visible. Saw is fitted with two metal guides that slide onto vertical posts on the mitre saw. Metal measuring guide holds the wood job to the correct length. Saw has a protective brown paper wrapper. This mitre saw set is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.On mitre saw- 2x logos "REGISTERED / BODMANN / TRADE MARK" and embedded stamp “348”. On saw - Remnant of logo on blade “ULMIA Schutz OTT Marke” with image of a church-like tall building, and 2x , "BEST QUALITY / BODMANN / MADE IN GERMANY” flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, mitre box set, mitre saw, bodmann and co reinscheid, germany, ulna ott of of swabian alb, germany, anke of swabian alb, germany, sovereign of the sea, ship model, hobby, ship model tool, mitre saw set -
Phillip Island and District Historical Society Inc.
Photograph Album, Kodak, Phillip Island Cemetery, c 1889
The Album was compiled by Nancy McHaffie late 1990's, with the assistance of Edith Jeffery's, with her book "Garden of Memories" and extensive knowledge of Phillip Island. The Cemetery lies back from the road and is surrounded by Manna Gums, rare Peppermint Gums, Blackwoods and other native trees. In all 25 acres of land were set aside as Crown Land in the land settlement of 1868. There are 6.2 acres of wetlands near the cemetery entrance.Captain McLeod: Captain McLeod and family kept the Post Office at Newhaven. He also built a boat called old "Trusty" and launched it almost opposite Churchill Island. Unfortunately, at a later date, the "Trusty" was the cause of a tragedy. The bottom of the boat had become so encrusted with marine growth that the owner decided to beach her between the jetties at Griffiths point, now San Remo. Before the job was completed the soring gave way and allowed the boat to tip over on her side, causing Captain McLeod to be crushed to death. Died March 3rd 1880 aged 64 years. Also buried in this grave is his wife Susan - died May 24th 1882 aged 62 years. Their son Andrew McLeod died February 21st 1916 aged 60 - loved husband of Elizabeth E McLeod. Alexander was Captain of the "Genista" for 12 years.phillip island cemetery, captain alexander mcleod, susan mcleod, andrew mcleod, nancy mchaffie, edith jeffery -
Bendigo Historical Society Inc.
Document - LONG GULLY HISTORY GROUP COLLECTION: COMMUNITY GARDENS IN LONG GULLY
An invitation to a Community gathering - walk around the grounds of the House and future family park (Chum Reserve) & look at ideas and plans people have for starting a basic food producing, interesting gardens at the Long Gully Community House. Community people have been meeting over a few meetings to look at ideas to start a community garden in Long Gully. Some ideas are mentioned. Over the page is An Information Day & Evening at Shared Action re assisting and working alongside young secondary school students building the adventure playground and surrounding areas. Central Victorian Group Training (Industry Skills Center) will provide training and overall supervision of students and community leaders. A 2 day Induction Training Course and be able to work voluntarily for between 2 to 10 days on the job site with a small work group is required.bendigo, history, long gully history group, the long gully history group - community gardens in long gully, chum reserve, long gully community house, central victorian group training (industry skills center) -
Ballarat Tramway Museum
Document - Letter and Envelope, 1937
Five page handwritten letter on light brown or fawn lined paper within a brown envelope within Reg. Item 2488, page 105. The envelope has been glued to the back cover of the book and is address to "Mr. James Inspector / Electric Supply". Seven overseas stamps have been stuck to the envelope. The letter dated 11/10/1937 from an unknown person who lived at 305 Eyre St Ballarat, not signed, outlines the building the horse tram depot in Wendouree Parade. The person put in a quote as the plumber. Notes various aspects of working on the site, materials, difficulties, Thompson and Moore of the Adelaide as the contractors, number of people on the job, problems with the construction, wind damage, building the workers cottages, their rooves and the cash boxes for the conductors. Image 2520i2 shows the position on the page or back cover of items 2520 and 2521.Inktrams, tramways, horse trams, depot construction, depot, thompson and moore -
Bendigo Military Museum
Photograph - AITA Award - RA Svy’s AUTOMAP 2 Computer Based Map Production System, Army Survey Regiment, Fortuna, Bendigo, 1984
This collection of three photos of the Australian information Technology Award (AITA) won by the Royal Australian Survey Corps (RA Svy) AUTOMAP 2 computer-based map production system, was taken in 1984 at the Army Survey Regiment, Fortuna, Bendigo. The following article appeared in the ARMY Newspaper on Thursday 21st February 1985. ‘In computerised map production. Survey soldiers lead the world. BENDIGO: Army surveyors have been put on the map as world leaders in computerised map production following the Australian information Technology Awards. RA Svy won the Computer Assisted Draughting – Mapping section for its Automap II System which has created considerable interest among overseas defence experts. The award for the digital mapping system was accepted by OC Air Survey Sqn, MAJ Rob John, who said it was a great morale-booster for the soldiers of the Bonegilla (sic)* -based Army Survey Regiment. "Setting up a state-of-the-art system like Automap II. is an enormous task, " he said. "We started in August 1983 and it's only recently that we have achieved production results. "We were all very pleased to have our efforts recognised in this way. “Of course, credit must also go to the Intergraph Corporation for manufacturing the system and carrying out most of the development." RA Svy is responsible for producing all of Australia's maps used for defence purposes. Its topographical maps have a scale of 1:50,000 or 1:100,000 although Automap II has the capability of producing smaller scale maps - down to 1: 2,000,000. Automap II consists of three computers and three sub-systems: input, raster scanning, and graphic edit. The input sub-system has eight stereo plotters, two interactive graphic workstations and a system manager workstation. The stereo plotters use superimposition optics to digitise features from aerial photographs. It incorporates a voice recognition system so the operator can simply say "House", "Windmill", etc; and the relevant feature will be incorporated in the digital picture. Individual map separations are scanned and converted by the raster scanning sub-system to a digital raster image. This image is then converted to a graphics file in Intergraph format.’ *Note – the Army Survey Regiment was located in Bendigo, not Bonegilla as incorrectly stated in the article. The article appears on Page 137 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. Additional history of the AUTOMAP 2 system with historic photographs is covered in pages 119, 137-143 and 157 of the 'Mapmakers of Fortuna’ book. See item 6223.23P for additional history and photographs of the AUTOMAP 2 system.This collection of three photos of the Australian information Technology Award (AITA) won by the Royal Australian Survey Corps (RA Svy)’s AUTOMAP 2 computer-based map production system, was taken in 1984 at the Army Survey Regiment, Fortuna, Bendigo. The photographs are printed on photographic paper and are part of the Army Survey Regiment’s Collection. The black and white photographs were scanned at 300 dpi. .1) - Photo, black & white, 1984, AITA Award sitting between the dual screens of an AUTOMAP 2 Graphic Edit Workstation. .2) - Photo, black & white, 1984, MAJ Job Johns (centre) and two of Intergraph Corporation IT engineers proudly hold the AITA Award next to an AUTOMAP 2 Graphic Edit Workstation. .3) - Photo, black & white, 1984, The AITA Award displayed on a pedestal in the Army Survey Regiment Officers Mess. .1P to .3P –No personnel are identified. ‘AITI Award to AUTOMAP II 1984’ annotated on cover sleeve. royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna -
Ringwood and District Historical Society
Newspaper, Scrapbook Clipping, Library Collection, Ringwood, Victoria
Newspaper Clipping from "The Post", Wednesday, August 4, 1993. "Bash attack on businessman"'.A local restaurateur and council candidate received abrasions and bruises after a vicious attack by two men at his pizza restaurant on Sunday morning. Joe Cassari, who is standing in Ringwood's North Ward was assaulted and the front window of his shop smashed after he asked two men to leave. Mr Cossari's nephew called the police immediately the fight started, but they had to call again 20 minutes later when they still hadn't arrived. The police said they had another job to go to. -
The Beechworth Burke Museum
Audio - Oral History, Jennifer Williams, Miss Elaine Howell, 11th May 2000
Miss Elaine Howell was born in Beechworth. Her mother was born in Stanley and her father in Myrtleford. Her mother's father was born in England and her other grandparents in Australia. She is one of four daughters. Miss Howell completed school and went on to the Convent to do her leaving. She then learnt shorthand typing and got a job at the shire where she was the clerk to the Shire Secretary. This oral history recording was part of a project conducted by Jennifer Williams in the year 2000 to capture the everyday life and struggles in Beechworth during the twentieth century. This project involved recording seventy oral histories on cassette tapes of local Beechworth residents which were then published in a book titled: Listen to what they say: voices of twentieth century Beechworth. These cassette tapes were digitised in July 2021 with funds made available by the Friends of the Burke.Miss Elaine Howell provides an insight into a life of an educated Beechworth woman in around the 1950's she also provides a perspective from the town shire (the complaints and plans that occurred throughout the year). She went to two schools to further her education and learnt how to shorthand type. This skill provided her with a job at shire as clerk to the shire secretary. This is the only job she ever had. Her story also offer significant insight into Beechworth life and the dances and job prospects at the time (which was not a lot in the 60's). This oral history account is socially and historically significant as it is a part of a broader collection of interviews conducted by Jennifer Williams which were published in the book 'Listen to what they say: voices of twentieth-century Beechworth.' While the township of Beechworth is known for its history as a gold rush town, these accounts provide a unique insight into the day-to-day life of the town's residents during the 20th century, many of which will have now been lost if they had not been preserved.This is a digital copy of a recording that was originally captured on a cassette tape. The cassette tape is black with a horizontal white strip and is currently stored in a clear flat plastic rectangular container. It holds up 40 minutes of recordings on each side.Miss Elaine Howell /listen to what they say, beechworth, oral history, burke museum, elaine howell, howell, stanley, myrtleford, school, convent, leaving, shorthand, typing, shire, clerk, shire secretary -
Federation University Historical Collection
Article - Article - Women, Ballarat School of Mines to University of Ballarat: Women of Note; Verna Barry, Secretary to Jack Barker
Verna Barry commenced worked as a typist at the Ballarat School of Mines (SMB) in 1961. In 1965 she became private secretary to Jack Barker, Principal of the Ballarat School of Mines and later Director of the Ballarat Institute of Education (BIAE) and the Ballarat College of Advanced Education (BCAE). A trusted and loyal member of staff, Verna was devoted to her job, her workplace and greatly respected Jack Barker with whom she worked loyally for until his retirement in 1987. In 1988 Verna was appointed Administration Officer with Engineering Faculty. She spent five years with Engineering Science from 1990, and in 1996 worked for Information Technology & Mathematical Science (ITMS), becoming a key member of the Research Support team. After thirty-nine years of service to the University of Ballarat and its predecessor institutions Verna Barry retired from full-time work on 31 January 2000women of note, verna barry, typist, secretary, jack barker, 1965-1987, ballarat school of mines, ballarat institute of advanced education, ballarat college of advanced education, administration officer, engineering faculty, engineering science, information technology and mathematical science, research support -
Geelong Naval and Maritime Museum
Photograph - Framed Picture, "Lightning", Unsure
Built by the celebrated shipbuilder Donald McKay, the Lightning was the first clipper built in the USA for a British firm. In 1862 on a return trip to Liverpool, it struck an uncharted rock in a rip. No water entered the vessel but on arrival a rock 6 feet long was found sticking through its timbers and beginning to work loose. Under Capt. 'Bully' Forbes, the Lightning made its first voyage to Australia in 77 days, and on its return voyage, made it in a record 64 days. The Lightning's entire life was spent on the Australian run carrying immigrants and cargo. It had the job of carrying free of charge immigrants and early consignments of introduced animals, including rabbits, which were sent to Thomas Austin of Barwon Park, Winchelsea. The wreck of ‘Lightning’ caused by fire was the worst shipping calamity in Geelong's history. Geelong's Centenary celebrations included a re-enactment of the burning of ‘Lightning’.Framed picture of ‘Lightning’ which is a ship particularly historic to the region of Geelong because of its story, the worst shipping calamity in Geelong's history.Framed Picture of ship "Lightning"lightning, geelong, ship wreck -
Wodonga & District Historical Society Inc
Domestic object - COLEMAN Fuel Iron
Coleman, originally known for making lanterns, made over 30 different models of irons from 1929 to 1948. They generally came in an enamel coloured finish. The best known and most commonly found today is the “Cool Blue” enamel Coleman’s 4A gasoline iron. The Coleman 4A gasoline iron was much lighter than the previous ‘sad irons’ and no longer required to be heated on the stove or by charcoal. Instead, the pump was used to build up pressure in the fuel tank and a match was lit underneath the iron, making a flame inside the iron that would distribute the heat on the surface. Despite these benefits, fuels irons made ironing a potentially dangerous job. They had a very real possibility of causing a fire or exploding. Gas-pressure irons, that had been manufactured as early as 1900, were eventually replaced by electric-powered steam irons, in the 1970s as an affordable and safer alternative.This item is significant because it is an example of domestic appliances used widely throughout the Wodonga District.A self-heating iron which made from metal and enamel plate which included a small tank for fuel which powered the unit. A small wooden pump was used to build up pressure in the iron’s fuel tank. It has a wooden handle.domestic appliances, coleman fuel irons -
Vision Australia
Photograph - Image, Photograph of John Olsen
The Queensland Musical, Literary and Self Aid Society for the Blind was established on 13 March, 1917. Many children who were blind and who had studied music with Mr Hebert Leon Newman at the 'Queensland Blind, Deaf and Dumb Institution wished to continue after leaving school but could not afford to do so. Mr Olsen, the librarian, who was blind, conceived the formation of a Society to meet this need as well as providing an after work social centre and to address the limited job opportunities available for adults who were blind. The committee of the Blind Deaf and Dumb Institution encouraged the new Society by providing a grand piano and seating accommodation for 100 people in their library. In 1921 he established the John Olsen Literary Competition, then became the Edwin Dickinson Literary Competition and later the Vision Australia Dickinson Literary Awards.Photograph in frame with printed inscription below.John Olsen Founder Queensland Musical, Literary & Self-Aid Society for the Blind President 1919-1926 Died 9th Jan 1926john olsen, artwork, queensland musical literary and self aid society for the blind -
Glenelg Shire Council Cultural Collection
Medal - Naming Ceremony for M.V Portland - Medallion, 1988
From the Maritime Union of Australia: In December 2015 the crew of the MV Portland heard about their sacking by newspaper article. What ensued was a 60 day sit in by the crew to fight for their jobs. The crew were threatened with legal action but they stood firm because they believed that their ship was purely cabotage trade taking Australian resources from one Australian port to another Australian port as it had done for 27 years without incident and it should have an Australia Crew. On January 13 2016, at 1am the five remaining crewmembers aboard the Alcoa-owned vessel were woken by up to 30 security guards and intimidated into leaving the vessel. A foreign crew had been flown in and it crewed the ship and it sailed off the Australian Coast. This documentary was produced one year after the dispute but since then the Australian Industrial Relations commission was attempting to prosecute the union and the crew. They failed.Bronze coloured medallion. One side has an image of a vessel with writing around the circumference of the object. The reverse of the objects has a list of vessel specifications. with plastic stand - acrylicPortland Smelter Services Pty. Ltd / Hyundai Corp. Hyundai Heavy Ind Co Ltd / Naming Ceremony / For / 36500 DWT Bulk Carrier / MV Portland / March 25, 1988 / Ulsan / Koreavessels, vessel, container, maritime union -
Bendigo Military Museum
Photograph - Co-ordinatorgraph Map Grid Production, Army Survey Regiment, Fortuna Bendigo, c1960s to 1970s
This is a set of seven photographs of map grid production using co-ordinatorgraphs at the Army Survey Regiment, Fortuna Bendigo. c1960s to 1970s. The Aristo Co-ordinatorgraph introduced in 1962 was a large heavy steel framed light table with a scribing head that moved in a XY direction using a vernier calibrated measuring scale to 0.001 of an inch. Whilst hand operated it was much quicker and accurate than manual grid and graticule calculation, plotting and scribing. Mapping PNG presented the Regiment with many challenges. WO1 Farrington and CPL John Dean developed computer software for the digitally controlled co-ordinatorgraph, the Calcomp 718 Flatbed Plotter. Much time was saved by automatically plotted cartographic grids and graticules, and automatically draw base compilation sheets complete with aerial triangulated stereo model control. This could be used for a number of maps and was the first step towards map automation. The history of co-ordinatorgraphs is covered in more detail with additional historic photographs, in pages 50 to 51 and page 88 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. SGT Bill Boyd appearing in photo .1P reach the rank of WO1 and for 11 years was the technical warrant officer at the Detachment Army Survey Regiment located at Bonegilla, Victoria. He was awarded the OAM, the Order of Australia Medal for the development of the Flexiflow quality control system. This system comprised a series of job plans and charts linked to a task allocation to resource magnetic planning board. Using critical path analysis and task prioritisation, complex job planning was efficiently scheduled, and re-prioritisations readily made. Reproduction requirements were effectively coordinated by way of weekly courier to the Army Survey Regiment. Supervisors and technicians fully embraced the system as they could understand their role, others around them and the positive production achievements. Bendigo. See page 178 of Valerie Lovejoy’s book for more information on WO1 Boyd’s contribution to RA Svy.This is a set of seven photographs of map grid production using co-ordinatorgraphs at the Army Survey Regiment, Fortuna Bendigo. c1960s to 1970s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1960s, L to R: SGT Bill Boyd demonstrating Aristo Co-ordinatorgraph equipment to unidentified technicians (x3) .2) - Photo, black & white, c1960s, Aristo Co-ordinatorgraph equipment. .3) - Photo, black & white, c1960s, unidentified technician operating Aristo Co-ordinatorgraph equipment. .4) - Photo, black & white, c1960s, L to R: PTE Desi Asaris and CPL Kalen Sargent operating Aristo Co-ordinatorgraph equipment. .5) - Photo, black & white, Photo, black & white, c1970s, John Bloor operating Calcomp co-ordinatorgraph equipment. .6) - Photo, black & white, Photo, black & white, c1970s, unidentified technician operating Calcomp co-ordinatorgraph equipment. .7) - Photo, black & white, Photo, black & white, c1970s, L to R: SGT Andy Covington and SGT John Waight operating Calcomp co-ordinatorgraph equipment..7P annotated on back ‘Covington & Waight’.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, carto, air survey -
Bendigo Historical Society Inc.
Document - YOUNG WORKERS' PATRIOTIC GUILD MEMBERS CONTRIBUTION CARD
Set up by the Education Department in 1915, students undertook to make money by their personal efforts. It was then donated to the Patriotic Fund in support of WW1 soldiers. When a student had earnt 1 pound they received a certificate from the Education Department.Young Workers' Patriotic Guild Members Contribution Card. Red card with black print no: 30621. The logo is a bee in a circle with EVD at the top and Young Workers Patriotic Guild in a banner inside the circle. Name and number of the school is 1317 Leichardt. The member is Frank Robbins and the first entry on the card is 1916 July. The entry is -carrying milk to bricklayer's 2/6 . August entry - saying recitation well 1/. Sept - Taking flowers to Mrs Creks. /3 Oct - Seed her side. 2/6 Nov - do. 8/3 Dec - Bottles & Vegies. 3/6. Jan 1917. Cr. Sale Violet roots flower Day. 2/. All signed by John J Bell. A certificate was given when £1 was reached. The monthly contributions were sent to the District Treasurer towards the War effort. On the back is a list of jobs hand written in black ink. Box 625organization, military, young workers patriotic guild. 1317 leichardt school -
Ballarat Tramway Museum
Photograph - Colour Photograph/s - set of 8, Carolyn Dean, 11/03/2002 12:00:00 AM
Set of 8 photographs of the operation of the BTM during the Begonia Festival, including the loading of the Horse Tram for Melbourne on Sunday 10/3/2002 and arrival back the following day. Taken by Carolyn Dean, on Kodak paper. 2012.1 - Richard Gilbert at Depot Junction - 9/3/02 .2 - Pushing the horse tram out of the depot - 10/3/02 - Gary Wood, Stephen Butler .3 - The Tow Truck and 33 at Depot Junction - Cranbourne Heavy Haulage - Associated Towing .4 - Horse tram waiting to be loaded .5 - Working out the job - Warren Doubleday, Len Millar, Alastair Reither, Alan Snowball and Gary Wood .6 - Being hauled up the ramp .7 - "Gone to Moomba" - the vacant space where No. 1 normally is - 11/3/2002 .8 - Being pushed back across Wendouree Parade, Alastair Reither, Gary Wood and Simon GreenAll have date written on rear and "photo by Carolyn Dean" on ink in the rear.horse trams, depot junction, moomba, loading trams, tram 1, tram 33 -
Rutherglen Historical Society
Image, Rutherglen Railway Station, 20/01/1907
Colour postcard photograph showing railway station and yard with a steam train engineWritten on back of card: "Address 214 Talbot St South Ballarat | Rutherglen 20/1/07 | Dear Alick. All well. Hope you are enjoying your new place & are in good health. Am going away by Excursion on Wednesday if any chance would like to see you have left my job so may not come back. Toby | Yours T Irvine" Address: "Mr A Hylands | c/o Mr Touleins | Baker | Swanpool | via Benalla" 1d stamp with postmark: "Rutherglen JA 22 07"rutherglen railway station, railway stations, steam trains -
Flagstaff Hill Maritime Museum and Village
Tool - Bung borer, Prior to 1950
Bung borer are a class of tools that bore a tapered hole in a wooden barrel, cask or flask, the tool makes a graduated tapered hole called a bung hole. The bung that goes into the hole can be made from wood, rubber or cork to make a tight seal or a tap is used to dispense the liquid inside the barrel. Often two holes would be made the first in the middle of the barrel and its highest location when laying on its side, this is use to fill the barrel. The second one, with the barrel now standing up, would be bored on one side of the head, near the rim, opposite the filling bung. That would be the one that would receive a tapered wooden or metal tap for dispensing liquid. There have been many models of bung borer used, the age old pattern is of a simple tapered spoon, later more sophisticated models would appear to do the same job and over the years numerous types of design have been patented.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bung borer threaded with wooden handle. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, barrel bung hole borer, barrels, coopers tools -
Warrnambool and District Historical Society Inc.
Letter book, 1933
This letter book contains letters that date from 1933 to 1936. It came originally from the office of John William Crawley Junior, an engineer, architect and surveyor in private practice in Warrnambool and also the engineer for the Shire of Warrnambool from 1895 to 1935. His father, brother and son were all engineers and worked in that capacity or as the Shire Secretary, for the Shire of Warrnambool, with the Crawley family recording a total of 132 years of service to the Shire. The Shire of Warrnambool existed from 1863 to 1994. The letter book was also used by John Crawley’s son, Rolf who took over the job of engineer at the Shire of Warrnambool in 1935 and held the position until 1968. The book then came into the possession of Michael Hand who took over the private surveying practice of Rolf Crawley in Warrnambool. The Warrnambool and District Historical Society acquired the letter book, along with several other Crawley ledgers, from the Michael Hand Estate. This letter book is of considerable importance as it contains letters written by John Crawley Junior and Rolf Crawley, both engineers for the Shire of Warrnambool over the years covered by the letter book. It will be very useful to researchers. This is a hard cover book of 1000 pages. Only half of the pages have been used and there are some loose sheets. The book is bound on the cover corners and on the spine with buff-coloured leather. The pages contain an alphabetical index and handwritten letters. Some pages are water-stained. ‘Letter Book 1933 Shire’john william crawley, warrnambool, rolf crawley, warrnambool, shire of warrnambool -
Federation University Historical Collection
Article - Article - Women, Ballarat School of Mines: Women of Note; Ruby Helen Lonie, Staff Member and Acting Registrar, (1895-1979)
Ruby Lonie was Senior Clerk of the Ballarat School of Mines (SMB) Administrative Staff. Always known as Miss Lonie, her sole position was at SMB where she worked between May 1914 and May 1960. When the SMB Registrar, John Robinson, died in 1935 the question of who would fill the position became a matter of urgency. The temporary answer was Miss Lonie, who was the senior clerk on the Registrar's staff. The permanent position was looked upon as an exclusively male preserve. Twenty Four years after having acted as Registrar the current SMB Registrar, F.F.Ferguson recognised Miss Lonie's assistance and her extensive knowledge of the history and the administrative procedures of the School. At Miss Lonie's retirement function SMB President, M.B. John, noted that Miss Lonie had joined the staff in 1914 and had 'done a tremendous job since that time, and for many years had been the Registrar's "Right Hand Man"women of note, ruby helen lonie, ballarat school of mines, senior clerk, administrative staff, acting registrar, recognition at retirement, f ferguson, smb president, m b john, 1914-1960 -
Flagstaff Hill Maritime Museum and Village
Tool - Bung borer, Prior to 1950
Bung borer are a class of tools that bore a tapered hole in a wooden barrel, cask or flask, the tool makes a graduated tapered hole called a bung hole. The bung that goes into the hole can be made from wood, rubber or cork to make a tight seal or a tap is used to dispense the liquid inside the barrel. Often two holes would be made the first in the middle of the barrel and its highest location when laying on its side, this is use to fill the barrel. The second one, with the barrel now standing up, would be bored on one side of the head, near the rim, opposite the filling bung. That would be the one that would receive a tapered wooden or metal tap for dispensing liquid. There have been many models of bung borer used, the age old pattern is of a simple tapered spoon, later more sophisticated models would appear to do the same job and over the years numerous types of design have been patented.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bung borer threaded with wooden handle. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, barrel bung hole borer, barrels, coopers tools -
Unions Ballarat
Book - Contemporary Labor Economics, Second Edition (D.J. Spiers Collection), McConnell, Campbell R. et al
Chapter titles: Chapter 1: Labor Economics Introduction and Overview -- Chapter 2: The Theory of Individual Labor Supply -- Chapter 3: Population, Participation Rates, and Hours of Work -- Chapter 4: Labor Quality: Investing in Human Capital -- Chapter 5: The Demand for Labor -- Chapter 6: Wage Determination and the Allocation of Labor -- Chapter 7: Alternative Pay Schemes and Labor Efficiency -- Chapter 8: The Wage Structure -- Chapter 9: Mobility, Migration, and Efficiency -- Chapter 10: Labor Unions and Collective Bargaining -- Chapter 11: The Economic Impact of Unions -- Chapter 12: Government and the Labor Market: Employment, Expenditures, and Taxation -- Chapter 13: Government and the Labor Market: Legislation and Regulation -- Chapter 14: Labor Market Discrimination -- Chapter 15: Job Search: External and Internal -- Chapter 16: The Distribution of Personal Earnings -- Chapter 17: Labor Productivity: Wages, Prices, and Employment -- Chapter 18: Employment and Unemployment.Relevance to union business.Book; paper.Front cover: authors' names and titles.btlc, ballarat trades and labour council, economics - labor, unions, collective bargaining, wealth distribution, employment -
Melbourne Legacy
Booklet, Making Contact. Some facts and talking points to aid you when making contact with prospective donors, 1962
Booklet published for Melbourne Legacy to assist Legatees launch the new Endowment Scheme Campaign Oct 25,1962. A new campaign by Melbourne Legacy to assist Legatees with facts and talking points to aid Legatees when making contact with prospective donors. Sections of the booklet include: Our aim in education; Health is watched; Physical and cultural; Career guidance; Legacy Residences; Holidays and camps; Legal assistance, and Free Firewood. The Health section mentions: "a permanent dental clinic at Legacy House". The Education section mentions: "promising children are helped and encourages to carry their education right through University". The Career section says: "No Legacy child is sent into a dead-end job". The Residences section says: "Three homes - homes in the real sense of the word - are maintained by Legacy in Kew for Legacy children. They are Blamey House, Harelands and Stanhope, the first two owned by Legacy and the last leased free from the Red Cross, in return for its maintenance and upkeep."The booklet gives Legatees the facts and reasons why a potential donor should donate to Legacy. A good snapshot of Legacy's work in the 1960s.Black and white printed, 8 page booklet.Handshake on the front cover. Legacy badge top RH corner.fundraising, legacy promotion -
Melbourne Legacy
Letter - Document, letter
Job application dated 6 February 1943 by Mr R Roper of Albert Park for the position of Manager of the Legacy Club Hostel. It lists his experience in WWI and running a farm in Gippsland. Holmbush was the first children's home established by Melbourne Legacy. It was later renamed Blamey House when the first Blamey House was sold. Melbourne Legacy ran three residences: Blamey House (purchased 1947) , Stanhope (purchased 1945) and Harelands (purchased 1950), to take care of children whose fathers were servicemen, and who may have been left orphans, or whose mother may have been unable to care for them herself. Harelands accommodated boys and girls under the age of 14, Blamey House looked after boys over 14, and Stanhope looked after girls over 14. The children were cared for until they were old enough to become independent.A record of written correspondence regarding job applications in 1943.Letter from 1943 applying for a position at Holmbush on white notepaper, black ink handwriting, two hole punched.residences, holmbush, holmbush administration -
Wodonga & District Historical Society Inc
Journal - Australian Rough Diary 1927, Sands & McDougall Pty. Ltd
George James McFarlane was born on 19 August 1895 in Wodonga, Victoria. He was the youngest son of Charles John McFarlane and Emily Charlotte nee Ellis. He married Margaret Frances Kirley in Wodonga in 1918 and they had 6 children. George kept this diary for most of 1927. It documents his daily life and some local events. George worked part time with the local blacksmith and then on his own farm before and after work. He was later to take over the blacksmith himself, operating as a blacksmith and farrier from premises in High Street, Wodonga. George's diary documents his daily dedication to other jobs on the farm including trapping and shooting vermin such as rabbits and foxes, growing watermelon and vegetables and training horses. He also became a member of the Albury Coursing Club. In his later years, George moved to Euroa and then fo the Northcote and Broadmeadows area of Melbourne where he died in 1968.A small diary with cardboard cover including volume and publisher details within a border. A red and white retailer sticker has been adhered to the front cover. The diary includes a calendar for 1927 and 37 pages of information including postal, money order and telegraphic information, British weights and measures and Directions for Making a will. The remainder of the diary is divided into 3 days per page. Entries have been entered until 28 August 1927.On front Cover: INVICTA AUSTRALIAN 1927 ROUGH DIARY / No 6 WITH THREE DAYS ON A PAGE / Price 2s. /PRINTED AND PUBLISHED BY SANDS & MCDOUGALL PTY. LTD. / SOLD BY ALL STATIONERS. On a circular sticker adhered at lower edge: BLAKE'S BUSY BOOK BAZAAR/ AND MUSIC WAREHOUSE/ ALBURY Handwritten on front: G J. McFarlane/ Wodonga/ Jan 1st 27g. j. mcfarlane, mcfarlane family wodonga