A Melbourne District Nursing Service (MDNS) Sister is giving nursing care to a lady in her own home. The Sister is wearing the grey uniform dress of that era under her gown. Her grey beret has a red Maltese cross applied to its centre front. The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Melbourne District Nursing Service and from 1966 Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Sisters provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelitis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.Black and white photograph of a Melbourne District Nursing Service (MDNS), Sister attending a lady in the bedroom of her home. The Sister, who is smiling, is wearing a white gown over her grey uniform with part of the collar visible, and her grey uniform beret over her short dark hair. She is standing to the right of the bed looking at the lady, and has her right arm extended touching the pillow on the bed. With her other hand she is holding the right hand of the lady. The lady, who is smiling, has short dark swept back hair and is lying on her left side against two pillows on the bed; she is covered with light coloured bed coverings, A metal type, pale colour with dark rim, wash basin is sitting on a white wooden chair to the front of the Sister. A towel is hanging over the back of the chair. On the bottom left of the bed is a magazine with the word 'Woman' and below this a picture of a cat, on its cover. A small table with a lamp on it is behind the Sister and part of a concertina door to her rear right.Photographer Stamp. Quote No. 2568melbourne district nursing service, mdns, mdns patient care

presentation of certificates of applied science (ambulance) to T (?) O'Loughlan, K (?) Robinson and D. Smith. These were the first ambulance officers to graduate from the new ambulance officers training course. Mr R. W. Purnell, president of the ambulance service, makes the presentation. Source inscription on photograph.Black and white photograph. Three ambulance officers being presented certificates by man in suit.o'loughlan, robinson, d. smith

This child's green, silk, party dress was worn by Sylvia Marriott in 1927. The Marriott family were early settlers in the Moorabbin ShireMembers of the Marriott family arrived in Port Phillip in 1857. However it was John and Jane Marriott who in 1876, (after toiling hard since their arrival in1871, for very little gain), first leased, then purchased in 1882, 30 acres with a four-roomed house in East Boundary Road, in the area then called East Brighton. (Now known as East Bentleigh). The land they purchased had previously been a part of the 1841 Dendy Special Survey. Over the following years, John and his four sons with hard work and determination became prosperous vegetable growers and purchased further land in the area. Following John's retirement and subsequent death in 1903, the land was passed to his sons, and then onto the Marriott grandchildren. The family continued to remain very prosperous and successful vegetable growers and are one of many families steeped in the tradition of vegetable growing which significantly contributed to the prosperity of the Moorabbin ShireA home-sewn pale green silk party dress, worn to a wedding by four year old, Sylvia Marriott c 1927. The skirt of the dress has layers of ruffles. It has short cap sleeves. Decorative ribbons are attached at the shoulder continueing to the waist, then hang loosely over the skirt of the dress. Small pink and white ribbon rose buds have been applied at the neckline, waist and the edges of the sleeves .brighton, moorabbin, marriott, clothing, market gardeners, home, dressmaker, needlework, dendys special survey

This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied, double collar lip; square upper with flared lower. Neck has seams and shoulder seam from 3-piece mould. Body with horizontal ripples tapers inwards to base. Push-up base with pontil mark and embossed inscription. Tape over wire around mouth. Cork remnants inside mouth. Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable

This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied double collar lip; square upper and flared lower. Neck has seams and shoulder seam from 3-piece mould. Body tapers towards base. Push-up base with pontil mark and embossed inscription. Base is uneven. Mouth has remnants of the seal in it and tape remnants around its outside. Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable

This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the flared collar. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive glass, cork-top style. Applied flared lip, slightly bulbous neck with horizontal lines in glass. Shoulder has seam, body tapers inwards towards base. Heel is thick, with concave base, wide inverted pontil, uneven base. Glass has some bubbles, blow lines and imperfections. Sediment inside bottle along one side. Surface of glass is scratched.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, olive green glass

EIG School - Ralph Birrell Collection - Construction of Latrobe Uni. C1966. Construction, Bendigo Institute of Technology, Engineering School, Applied Science. Men in suits on at microphone (possibly Ralf Birrell) another with shovel. Holden car to right of picture has sign on top, only partially visible, writing on top GEO T.V. R. Markings: red print, 17 66M8. Yellow print Made in Australia.Kodakeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection - construction of latrobe uni. c1966. construction, bendigo institute of technology, engineering school, applied science. men in suits microphone (possibly ralf birrell) shovel. holden, writing on top geo t.v. r.

'Lost Glories: a memorial to forgotten Australian buildings' was published by David Latta in 1986. It tells the story of a number of significant Australian buildings that had previously been demolished. A chapter in the book was devoted to Goathland, later known as Tara Hall. To supplement the text, he sourced photographs from a range of suppliers, chiefly the Royal Women's Hospital which had once owned Tara Hall, but had sold it in 1960. This is one of the photographs donated to KHS by the author.A detailed photograph of the main gable on the front of Tara Hall (previously named Byram, Goathland and Lowan). The façade included detailed terra cotta mouldings. The Kew Historical Society was gifted a remnant of this façade (ie. ‘East or West’) in 2013. The use of applied terra cotta decoration by the architect Edward George Kilburn, of Ellerker & Kilburn, is typical of his style of the period. Mark Strizic (1928-2012), photographer. byram, goathland, tara hall, lowan, studley park (kew), george ramsden, sir malcolm mceacharn, edward george kilburn (architect), studley park road (kew)

Buff coloured map. On top of map 'plan of area applied for on lease no. 10423, under the mining leases regulations, by John G. Stanfield, mining district of Bendigo. Map shows lease coloured in red, see record 2205.821b for letter pertaining to map. Street on map: Rowan St., Shamrock St., Mackenzie Street, Old High St., High Street, Ophir Street, Booth Street.bendigo, business, mccoll, rankin & stanistreet

Front cover and sample page from "Tip-top Transfers, Book 1: Sprays". An example of mid century sewing and homemaker books. In this booklet, iron-on transfers are provided to be applied to garments or other fabric. The design can then be embroidered over the transfer. This edition contains flower designs, or sprays.An example of mid 20th century advertising through 'how-to' books.Digital copy of front cover and sample page of a booklethistoric advertisements, domestic science, tip top transfers, embroidery, sewing

Junction Hotel Armstrong and Post Office. c1866 In 1864 Mr Neill Bruce, storekeeper of Great Western applied for a publican's license for the building photographed. It had 3 sitting rooms and 5 bedrooms. Mary Kershaw had the license from 1881. Thomas L. Barker & Co in 1890. Two story brick and attached single story weatherboard building with shingle roof. Group of men and women standing in front. Post Office Painted on side of building. Possibly tin roofed stables at rear.hotel

This photograph shows one of the aspects of nursing care carried out by the Royal District Nursing Service (RDNS). It shows wound care being given by a Sister to a patient in her own home. The bandage being applied is called a 'Blue line bandage'. which gives firm pressure to the ladies leg.The Trained nurses of the Melbourne District Nursing Society, MDNS, from its inception in 1885, provided wound care to their patients who ranged in age from the very young to the elderly. As research developed better products and dressing materials the methods and medication applied to wounds changed. MDNS received Royal patronage in 1966 and as Royal District Nursing Service, RDNS, the Education department developed programs, such as Wound Care Program and the Leg Ulcer Management Program, to provide their Sisters with methods of best quality care. The Sisters liaised with the patient’s Doctors and Hospitals to provide information on the progress of patient’s wounds and to receive any change of wound care from the Doctor. RDNS introduced Wound Care Specialists who did assessments and provided advice and support to the District Sisters working in the field. On the left of this black and white photograph is a Royal District Nursing Service (RDNS), Sister, with short dark hair and wearing a white gown, leaning over and bandaging the right leg of a lady. The bandage has a line around the centre. The lady is looking down at the bandaging; she is wearing glasses, and is wearing a dark padded dressing gown edged with white. The lady has her other leg bandaged and a dressing on her forehead. Her right arm is in a collar and cuff sling with her jacket covering most of her arm; the first finger of her left hand is bandaged. She is in her home and is sitting on a floral covered chair, with a white towel over its right arm. The lady has both legs elevated. mdns, melbourne district nursing society, rdns, royal district nursing service, rdns wound care

A cabochon is a gemstone that has been cut, shaped and polished. The resulting gem has a convex (rounded) obverse with a flat reverse. This method is usually applied to opaque gems such as this pair of agates. Cabochons are most commonly used in the design of pendants or rings. These cabochons are part of the jewellery collection of Mrs. Jean Raper.This item is from the Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper.2 cabochons or polished stones. One is in shades of brown and the other a lighter beige in colour.jewellery, cabochon, fashion accessory

This music stand set of shelves is one of many 19th century items of furniture, linen and crockery donated to Flagstaff Hill Maritime Village by, Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the “Giles Collection”. Many of the items of furniture, linen and crockery in the Lighthouse Keeper’s Cottage were donated by Vera and Aurelin Giles and mostly came from the simple home of Vera’s parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton) whose photos are in the parlour. They married in 1880. Henry, born at Tower Hill in 1858, was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor’s Flat State School where she was also a student teacher before, as family legend has it, she became a governess at “Injemiara” where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940. THE SHELVES During the years 1869-1935 there were well over 250 registered bamboo furniture producers in Britain. The earliest recorded firm was Hubert Bill of 14 Little Camden St, London N.W., who claimed to have been established in (1869 the first bamboo furniture maker), while Daniel Jacobs & Sons of Hackney Road, London, were still in business in 1915, after 45 years of production. Design, quality, price and methods of construction were fairly consistent throughout the whole period, but it was the imaginative and often eccentric choice of subject matter that marked the differentiation between the various firms. While most produced standard tables, stands and fire-screens, the more adventurous offered for sale items such as Corner shelve units, charcoal barbecue grills and musical tea tables. Shelves were often covered with embossed leather paper designs, at first imported from Japan and then later produced in England. Some firms incorporated the knobbly roots of the bamboo stems into their designs, generally to form feet. Occasionally handles to drawers and cupboards were made with these roots although they were more commonly carved as imitations. Handles were mostly of cheap metal or brass. The ends of the bamboo canes were capped with stamped metal or turned bone, ivory or wooden discs. Methods of construction fell into three categories. First and most common is that of pegging. Bamboo stems being hollow, thick dowels can easily be glued into the joints. Some firms farmed out this work of `plugging' the ends of the canes to part-time workers at home. The second method, that of pinning, was far less satisfactory as bamboo tends to split lengthwise and therefore the jointed pieces eventually disintegrated. The most efficient method was that patented in 1888 (patent No 2383) by the firm of W. F. Needham in Birmingham. It consisted of metal shoes and covers for all joints which were made by wrapping a metal strip around the stems and soldering the overlapping ends. Some joints were further strengthened by a small pin or screw. Needham was by far the largest and most successful manufacturer and their individual and superior method of construction undoubtedly gained them their reputation. A. Englander & Searle of 34 Gt Eastern St and 31 Mare St, Hackney, London, were a firm particularly concerned with methods of construction. Although they seem to have entered the bamboo furniture market at a comparatively late date, about 1898, they produced inexpensive bamboo, aimed particularly at the export trade. The company stated in their catalogue that bamboo furniture “can be exported in one piece or it can be exported in pieces and put together again. The fixing up is much facilitated by a system of marking and numbering. Further, no glue is required for putting together as the screw system only is applied”. This method of construction best fits the Etagere in the Flagstaff collection and it is believed to have been made by A Englander & Searle, exported in a knock down form to Australia, purchased in kit form from a dealer hear and put together by the owner. The Etagere is a significant item as it highlight furniture fashion of the late Victorian era. This item was highly sort after in its time and although mass produced, not many examples remain, so this example is a valuable addition to the Flagstaff collection. It is believed that the construction method used is by a notable and respected maker of bamboo furniture and that its production was aimed at the export market and probably came to Australia in kit form.Bamboo shelves: decorative free standing Etagere comprising three large shelves and one small shelf. Shelves are made of wood used to store either orange or bacon boxes (as there are no knots in the wood, imported from South America and cheap to recycle). Shelves are covered with embossed leather paper. Frame is made from tortoise shell bamboo (brown lacquer applied to simulate tortoise shell appearance). Ends of bamboo canes are covered with metal shoes and fixed with a pin. Other bamboo joints are fixed with round head steel screws. This item is part of the Giles Collection.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bamboo shelves, bamboo etagere, victorian furniture, furniture, bamboo furniture, embossed leather paper, simulated bamboo, tortise shell, a englander & searle, giles collection, henry giles, tower hill, cooramook, warrnambool breakwater, mailor’s flat, wangoom, 19th century furniture

This handmade black glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber-coloured glass and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a two-piece dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free-blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from the fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best-known, shipwrecks in Victoria’s history.Bottle, black glass wine bottle with contents. Glass has ripples, and crease lines and the neck has side seams. The mouth has a seal, the top of which comes away from the rest of the seal. The applied lip is wide. The base has been pushed-up base and has a pontil mark. Handmade with a ridge in the body around the base of the shoulder. The contents have no colour or odour. The bottle has a white sticker.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle, black glass, black bottle

Morris & Yeoman’s ' Lace Tablet - Lace making tablet kit, including 3 x lace tablets and instruction sheet for making Teneriffe Lace - instructions say ' This lace may be used for D’oyleys, afternoon tea cloths and many fancy articles ' - patent applied for in the United States of America - Made complete at our own factory, Astwood Bank, Redditch, England in 3 sizes or set of three in box with pins.’handcrafts, lacemaking equipment, teneriffe lace / morris & yeomans ' lace tablet - / d'oyleys

EIG School - Ralph Birrell Collection. - Construction of Latrobe Uni. C1966. Bendigo Institute of Technology, Engineering School, Applied Science. Speech time, with the men in suits is Ralph Birrell and Sir John Gorton. Members of the public are also in the background, and a white Holden off to the right. Speaker unknown, among the other men are Ralph Birrell and Sir John Gorton. Markings: in red, 18 66M8, in yellow, Made in AustraliaKodakeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection. - construction of latrobe uni. c1966. bendigo institute of technology, engineering school, applied science. speech, men in suits, ralf birrell and sir john gorton. members of public white holden. speaker unknown, among the other men are ralph birrell sir john gorton.

This 1890s photograph shows the early uniform worn by Melbourne District Nursing Society (MDNS) Trained nurses, (known as 'Nurse', in those days), when visiting patients to administer nursing care.The Nurse is speaking with a patient who is sitting in his back garden. It shows the style of clothing and the rear of a weatherboard house of that era. In Melbourne in 1885 it was recognized that skilled nursing was needed in the inner city to care for the sick poor in their own homes. On the 17th of February a meeting was held with prominent Melbourne citizens, five gentlemen and fourteen ladies. ‘Dr. Caffyn and Rev. Charles Strong explained the objects and scope of District nursing Societies that had been formed in other towns’ in UK. On that day the Melbourne District Nursing Society (MDNS) was founded, the first District Nursing Society in Australia. Subsequent meetings were held to form a Committee and to draw up a Code of Rules of the Society. It was decided only nurses who had attended a Nurses Training School and were fully qualified would be employed by the Society, and that the nurses would keep a daily journal of their work. After interviewing several candidates, the first Trained Nurse (Nurse), Mrs. Ferguson, was employed with a salary of £100 per annum and commenced work on the 1st of May 1885. She was employed for three months initially, but this was soon extended, “on the understanding she will make arrangements to live in the more immediate vicinity of her district”. A Doctor was consulted before any person was seen. In rotation, a member of the Superintendence Sub-Committee supervised the Nurse’s visits and could assist to alleviate some of the poor social conditions they found. Though only Trained nurses were employed, the term ’Nurse’ was used in those days. Lady Janet Clarke, a philanthropist, was one of the first two Vice-presidents and President from 1888 until 1908 (except when overseas); she was a driving force in the Society. She held the first fund raiser for the Society at her home ‘Cliveden’ and went on to help organize many functions where she, along with Committee members, manned the stalls to raise funds. She also took her turn to accompany the Nurse, and was noted for her kindness and benevolence. Over the years the Committee, which was made up of 80% ladies, worked tirelessly for the Society; many Auxiliaries were formed. A second Trained nurse, Mrs. Joanna Cannon, was employed in late 1885, with a trial period of six months which was extended. She and Mrs Ferguson were the stalwarts of the Society in the early years, Nurse Cannon remaining with the Society for four years and Nurse Ferguson for five years, though both had a short break due to the heaviness of the work. Nurse’s salaries were reduced to account for the cost of uniforms, and again in later years when establishments were rented by the Society and the nurses could now live in the Nurses Home. The two Nurses worked in the now CBD, ie from Spencer Street to Spring Street and from Victoria Parade to Flinders Street. At that time they walked the streets and lane ways amid the slums of inner Melbourne carrying their nursing bags containing lotion, ointments, powders, liniment, bandages, dressings, a case of spirits, and the Nurse's own clean apron, soap and small towel. They supplied equipment on loan, such as earthenware hot water bottles, splints, urinals, bed pans, bed cradles, feeding mugs, and air-cushions as well as providing blankets and clean bed linen, and nightdresses and clothes as necessary. From its inception the Society was at the forefront of health care and liaised with Doctors. They provided high quality nursing care to a range of people, often in destitute situations, some lying on rags on the floor as they had no bed, others with just a bed and maybe a thin blanket, a chair and nothing else. Their ages ranged from babes, children, adults to the elderly. The Nurses gave medications as ordered, dressed wounds e.g. to the injured, and surgical cases, and to those with leg ulcers; attended to patients with ‘surgical ailments’ such as ‘hip disease’; gave care to those with acute illnesses such as bronchitis, pleurisy, pneumonia, measles, and scarlet fever, as well as those with chronic illnesses such as consumption (tuberculosis), heart disease, arthritis, cancer, debility, neuritis and paralysis. They educated their patients, and their Carers, in the curing and prevention of disease; teaching the importance of hygiene, cleanliness, ventilation and good nutrition. They taught them, by verbal instruction and demonstration, how to make poultices, to make and apply bandages, apply medical appliances such as splints; and the Nurses supplied milk, beef tea and cooked soup when needed. As the work increased a third Nurse was employed but this was arduous work, particularly in the heat of summer and many Nurses only remained with the Society for several months. Black and white photograph of a Melbourne District Nursing Society (MDNS) Trained nurse (Nurse) wearing a white apron over her grey full length uniform, and wearing a white cap. She is standing and looking down at a man dressed in a white shirt and dark jacket and pants. He is sitting outside the rear of a weatherboard house, the boards of the house are applied vertically. A wooden ladder leans against another wooden building.melbourne district nursing society, mdns uniforms, rdns, royal district nursing service, mdns

Demonstrates how the SEC used painted metal signs to advise and remind staff of procedures for operating equipment.A metal sign painted in red. Hand painted lettering reads "THIS END RELEASE AIR BEFORE HAND BRAKE IS APPLIED" painted in off white. The corners of the sign have been rounded, with a hole made in each corner for attaching to the tram car. The reverse has the number 33 printed in small black lettering. The back of the sign has not been painted and has a rusted surface finish. The plate is slightly buckled.The number 33 is written in black on the reverse.tramways sign, painted signage for trams

Colour photo of Horse Tram No. 1 within depot with John Phillips and Warren Doubleday working on the fitting of the east end sliding door. The staircase support bracket has been fitted as well. Not known who was holding the door on the other side. Tram body has been undercoated and some yellow paint has been applied to one of the corner pillars. Taken on 3.11.1990, Carolyn Dean, on Fujicolour paper.On rear "159.1 3.11.1990, Carolyn Dean Photo" in blue inkhorse tram no. 1, tramcars, reconstruction, btps, tram 1

Negative (120) and contact print of VR tram No. 7 at the Elwood depot. See also Reg Item 3624 for other photos showing the tram. Side on photo, showing the strengthening steel work applied to this four wheel tram. Has two Robur Tea advertisements. Tram possibly preparing for a tour given the number of men standing on the side. Hi Res image filed in the dbtext/hawthtramcoll/Large Images/htd3623Large.jpgEnvelope containing negative and photo typed "Tram VR Elwood Spread the load." On the rear of the print "VR Tram - Elwood Depot 5'3" gauge".trams, tramways, victorian railways, vr, elwood depot, tram 7

This clear, green tinged, Half Whirley (or Whirly) salad oil bottle has been handmade by a glassblower from 1870s-1910s. A bottle with such elaborate decoration would have been sought after as there was no need to decant the sauce into another jug or bottle to make it acceptable for table service. It is possible that this bottle was recovered from the Loch Ard, wrecked in 1878. A diver found the bottle on a shipwreck in the coastal waters of Victoria about 100 years from when it was made. The diver who found this bottle has recovered objects from several different shipwrecks between the late 1950s and early 1970s. A sizeable proportion of those objects was from the wreck of the famous clipper ship Loch Ard. This salad oil bottle may very well have been amongst that ship’s cargo. It is part of the John Chance Collection. A paper titled ‘Glass Bottles from the Loch Ard Shipwreck (1878): A Preliminary Study’ by Iain Stuart, (published in Australian Historical Archaeology, 9, 1991) included a study of twelve salad oil bottles from the wreck of the Loch Ard. The bottles were of this same Half Whirley design (half meaning that it was Whirley on the upper half but not on the lower half of the body), as well as the same colour and size. A diagram of one of these twelve bottles matches the bottle in our collection. The paper mentions that eleven of the twelve bottles have a number on their base, just as this one has. It is estimated that foreign and salad oil bottles totalled four percent of all of the bottles carried as cargo on the ship. The Half Whirley bottle has side seams from below the lip to the base, indicating that the bottle was made in a two-piece mould that included the heel, body, shoulder and neck. The fancy ‘whirly’ twist pattern and panelled sides would have been cut into the mould’s inner surface. The uneven thickness of the ridge around the base comes from adding a separately moulded and embossed base after the bottle was removed from the mould. The applied finish (mouth and lip) was also added to the bottle. The elongated bubbles in the glass are evidence of the glass being mouth blown into the mould, thus forming the shape and pattern from the inside shape of the mould. The bottle probably had a glass stopper with a round top and wedge-shaped shank with a ground surface, allowing the bottle to be re-sealed. The ring between upper and lower lip allows the closure to be sealed and anchored. The embossed numbers are either “133” or “833” and may represent a particular bottle pattern, manufacturer or filler. Although the bottle is not currently linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 19th century. This whirley salad oil bottle is matches the whirley salad oil bottles recovered from the Loch Ard in the 1990s, adding depth of interpretation to the array of salvaged Loch Ard artefacts in Flagstaff Hill’s collection. The salad oil bottle is an example of the type of food condiment containers that were used in Victoria’s early days. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks, including the Loch Ard, have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; glass Half Whirley salad oil bottle, green-tinged, with some opalescence. Handmade, elaborately decorated bottle with round neck and base, and five-sided body. Applied double lip; straight upper, flared lower. The lower neck and shoulder have twisted spiral whirley patterns in the glass. The body tapers slightly inwards towards the base. It has five plain panels, one wider than the others. Side seams run from below the lip to the heel. The heel of the bottle is uneven in width, height and density where it joins the body of the bottle. The base is not level. Embossed characters on base. Glass has elongated bubbles towards the base and orange-brown sediment inside, on one side. Embossed "133" or “833” (the first character may be an “8”) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, 19th century bottle, collectable, bottle, green glass, tinged green, two piece mould, food bottle, oil bottle, salad oil bottle, whirley, whirly, half whirley, condiment bottle

Soft cardboard cover. Brown print on front & spine, black print on back. Background colour aquamarine with front sepia photo of sailing ship. Back has 2 photos of the Cowes ferry. 103 pages, cut plain, off white. Illustrated with black & white photos & maps. Page XV has yellow highlighter pen applied to 2 sentences. Opposite p1, handwritten in blue ink on lined notepaper taped to page: “MIRANDA 1852, LADY MILDRED 1909, SEAGULL, CARPENTARIA, AT. * HARDWOOD. AIR. PORT, AMSTERDAM. FIVE (BEACHED), BUILT 1948. WORKED, YARRA RIVER, DIESEL MOTORS TOO BE RESTORED, * TOORADIN”book, maritime, wrecks, western port

In 1980 the President was M.B. John. In 1980 the administration staff moved out of the lower level of the library and the space was converted for teaching use. Extensive alterations were made to the lower level of the mechanical/Civil Engineering wing for the housing of Applied Geology and Environmental Science. Car parking facilities were extended at Mt Helen.Orange soft covered book of 35 pages. Contents include: Courses, student numbers, Victorian School of Forestry, financial statement, Education Building (T Building) completed, Gillies Street Campus, Art building under construction, Great Hall (1870s Founders Hall) completion date expected to be mid 1980, Centenary Appeal, E.J. Barker Library, Computer Centre, bookshop . ballarat college of advanced education, bcae, mt helen, mount helen, library computer

Shell dressings were carried by individual soldiers, intended to be used as a first dressing in event of wounding or injury. Each cloth pack contains dressings comprised of a gauze pad stitched to a bandage and a safety pin. The field dressing was often the first line of treatment and was intended to be applied by the wounded man himself or other soldiers.This dressing is significant as a representative object carried by every soldier in WWII.Bandage covered in light brown cotton casing. Front side has inscription and instructions for use.Commonwealth of Australia / Shell Dressing / (directions for use)dressing, bandage, australia, johnson & johnson

Shell dressings were carried by individual soldiers, intended to be used as a first dressing in event of wounding or injury. Each cloth pack contains dressings comprised of a gauze pad stitched to a bandage and a safety pin. The field dressing was often the first line of treatment and was intended to be applied by the wounded man himself or other soldiersThis dressing is significant as a representative object carried by every soldier in WWII.Bandage covered in light brown cotton casing. Front side has inscription and instructions for use.Printed on cotton package containing the Shell Dressing. Inside a lined box. Commonwealth of Australia/ SHELL DRESSING / To Open /Outer Cover. Tear cover open at top between stitches. / Inner Waterproof Cover. Tear apart at the corner indicated by arrow. / DIRECTION FOR USE -Take the folded ends of/bandage in each hand, and keeping bandage taut, apply the/gauze pad to wound and fix bandages with safety pin./ In the case of head wounds, when respirators have to be worn, care should be taken to adjust the pad so that it / does not interfere with the fit of the face-piece. / DO NOT HANDLE WOUND OR PAD. / under a black line / Johnson & Johnson Pty, Ltd, Sydney/ MARCH 1944 On the reverse an adhesive sticker with the words "Lent by Lance Flynn" dressing, shell dressing, commonwealth of australia, johnson & johnson

The RDNS Sister is visiting the gentleman in his home and has dressed the wounds on his toe. The dressings applied have been ordered by a Doctor. Under her gown, the Sister is wearing her RDNS winter uniform of a blue/grey skivvie under a tunic style frock made of blue/grey herringbone winter materialFrom its inception in 1885 the Trained nurses (Nurses) of the then named Melbourne District Nursing Society (MDNS), later named Royal District Nursing Service (RDNS) gave high quality nursing care to patients in their own homes. They nursed patients referred by Hospitals and General Practitioners giving treatments, such as injections, wound care. When sterilized dressing trays were used for the first visit, and if applicable, the Sister demonstrated how to sterilize a 'home set up', using the washed forceps from the tray and using a clean cup and plate, making sure there were no chips or cracks, which were to be used to hold lotion and dressings at the time of future visits. They were given written instructions in how to sterilize this equipment in a saucepan on the stove prior to the next RDNS visit. Patients bought their own dressings, if not supplied by a hospital, and the attending Sister demonstrated how to sterilize these in the oven, using a casserole dish as a receptacle. Clear written instructions were left with the patient.Black and white photograph showing a Sister from the Royal District Nursing Service (RDNS), giving specific care to the feet of a gentleman. The RDNS Sister has shoulder length dark hair and is wearing a white gown over her RDNS uniform. The gentleman has balding dark hair and is wearing a dark dressing gown over his pyjamas. He is seated in a recliner chair in his lounge room and has his legs extended with his feet resting on the recliner foot. He has a slipper on his right foot and nothing on his left foot. The Sister is sitting on a stool to the right of him him with equipment, a cup, saucer and forceps and a casserole dish containing dressings, on a tray in front of her on a small square wood and cane stool. She has her right hand on the gentleman's left foot and pieces of dressing material can be seen around three of his toes. There is a patterned rug, under the recliner chair, sitting on top of the carpet. To the left of the chair part of a brick fireplace can be seen. Two windows with open short patterned curtains can be seen in the background. In the right foreground, part of a white and floral tablecloth can be seen hanging over a low table.Photographer stamp. Quote No. DN 86royal district nursing service, rdns patient care, rdns wound care

Authorisation to use all radios and televisions ordinarily kept at the address shown on the licence. Licences were issued by the Postmaster General under the Commonwealth Broadcasting and Television Act. The stamp on this licence indicates that the fee was paid at Elsternwick Post Office. The holder had previously held a Broadcast Listener's Licence, which applied only to radios.Buff card printed in blue on one side. Date stamped in black ink and signed in blue ink.Details of licence holder: G Watson 12 Austin Ave S3 Licence number: 20 18149 Fee: £8 10 0 Expiry: 28 10 66 Signature of issuing officer: indecipherable Time issued: 11.23 am Stamped: Elsternwick Vic 1 No 65radio licence, television licence, combined receiving licence

NORM HARRIS COLLECTION Practical Mining ( Arithmetic Applied To Mine Work - with Miners' Business Directory ) Book - - small hard - covered brown (pocket companion ) book by W Wilsons and published by Mason , Firth & McCutcheon , Printers Melbourne. In 1894.Binding is damaged .The inside page has an advert for Mining Ropes .Page A ,title- Practical Mining comprising easy notes , various formulae , rules and tables for Mining managers , Students etc.W Wilsonsbook, bendigo