The Hamilton-Smith collection was donated by the children of Grace Mary Hamilton-Smith nee Ellwood (1911-2004) and John Hamilton-Smith (1909-1984) who settled in Wodonga in the 1940s. The Ellwood family had lived in north-east Victoria since the late 1800s. Grace’s mother, Rosina Ellwood nee Smale, was the first teacher at Baranduda in 1888, and a foundation member of the C.W.A. Rosina and her husband Mark retired to Wodonga in 1934. Grace and John married at St. David’s Church, Albury in 1941. John was a grazier, and actively involved in Agricultural Societies. The collection contains significant items which reflect the local history of Wodonga, including handmade needlework, books, photographs, a wedding dress, maps, and material relating to the world wars. This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of social and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history. A gold toned metal lapel badge on a red ribbonOn face of badge: "AUSTRALIAN RED CROSS SOCIETY/LONG SERVICE".hamilton-smith collection, ellwood, hamilton-smith, red cross, medal, award, charity, community

The Hamilton-Smith collection was donated by the children of Grace Mary Hamilton-Smith nee Ellwood (1911-2004) and John Hamilton-Smith (1909-1984) who settled in Wodonga in the 1940s. The Ellwood family had lived in north-east Victoria since the late 1800s. Grace’s mother, Rosina Ellwood nee Smale, was the first teacher at Baranduda in 1888, and a foundation member of the C.W.A. Rosina and her husband Mark retired to Wodonga in 1934. Grace and John married at St. David’s Church, Albury in 1941. John was a grazier, and actively involved in Agricultural Societies. The collection contains significant items which reflect the local history of Wodonga, including handmade needlework, books, photographs, a wedding dress, maps, and material relating to the world wars. This item is unique, handmade and has a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of social and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history, social history and women’s history. A cream coloured, hand stitched cotton dip-waist belt from the Edwardian era, with metal fastening clasps. hamilton-smith, hamilton-smith collection, ellwood, wodonga, clothing, handmade, edwardian, historical clothing, belt, dip-waist belt

It is a woolen khaki green great coat, with inter shoulder lining of khaki green canvas. There are back belt loop holes in the interior, lined by the same canvas. The pockets are made of the same canvas and are not sew to the interior of the coat at the bottom. The insides of the sleeves are lined with a more beige khaki green material. There is a split flap that is 500mm long in the middle at the bottom of the coat, which is fixed shut with two brown plastic buttons and a metal hook and eye at the bottom. The construction of the jacket is four panels and has been taken in at the waist for form above both pockets. The jacket has a back pleat from below the triangle stitching below the nape of the neck. The back belt has three metal insignia buttons, and the backside is lined with canvas. On both shoulders, there are epaulettes which have one metal insignia button each. On the front, there are three metal buttons on each on flap, and when the jacket is done up, the left flap goes on top. It has three button holes on the left flap and one button hole on the right flap for a large brown button on the inside of the left flap. There are two outer pockets on either side of the jacket. Beneath the jacket lapels, on either side there are metal buttons, and there are button holes for them in the middle of the bottom lapel. Where the upper and lower lapels are split, there is a hook and eye. There is a brown plastic button on the underside of both the upper lapels, which is where the extra flap of fabric on the inside of the left jacket flap, can be fixed as a face protector. The tag on the inside reads; DAVID KLEIN PTY. LTD. Victoria 1967 An arrow (Department of defence symbol) SIZE 6 CLASS 8405 66.012.0494 REGIMENTAL NO................... NAME......................... The regimantal number section had a number filled in but then scribbled out and another number written above, which is 359282. The name section was filled in with B.R.MIER. The name and regimental numbers were done in black marker pen. All the metal buttons are decorated with the medical corps symbol, which is a serpent-entwined rod (Rod of Asclepius) surrounded by a laurel wreath and above the rod is a crown (St Edward’s Crown). On the outside of the upper sleeves, just below the shoulder, there is two patches that signifies the rank of Staff Sergeant. The top patch is an embroided St Edward’s Crown and represents the staff rank. It is 47mm wide and 45mm. Below this there is a patch depicting the three stripes/ chevorns of the sergeant rank. The chevorn’s points face down, and the sides measure 66mm, while the depth down to the point is 86mm. The bottom lengths is 100mm on both sides and the top lengths are 9mm. coat, trench coat, great coat, medical corps, staff sergeant, b.p. mier, 359282, david klein pty. ltd., 1967

Utility Pouch was a rectangular web case that was designed to carry three Bren 30 round magazines, or two Anti-tank Rifle Magazines, or Small Arms Ammunition, or a number of Grenades, or a Water Bottle. They were secured with a flap at the top, hinged at the rear, which was fastened with a brass stud fastener on a short web tab.The object is representative of utility pouch/pouch for carrying magazine/ammunition and other items of equipment from the mid to late 20th century. The original design is the 1937 pattern web equipment.Utility Pouch of rectangular web case. Of rectangular parallelepipped shape made of thick and sturdy fabric (canvas). The colour is of a pale shade of green. Front view - Rectangular shape with overlapping closing flap with a press-stud fastener to maintain closed. Left and right views - Both sides are identical. Made of a one piece of fabric forming the base as well ("U" shape) Back view - Rectangular with metal hooks on the middle part for attachment to a belt. There is a Twigg buckle on the top part of the pouch mounted on another piece of canvass ending in a triangular shape. . Bottom view - ‘the fabric forming the base is also forming the sides of the pouch. Top view - closing flap overlapping on 3 sides and forming part of the back of the pouch. Inside view - There is excess fabric from the back panel that forms an additional layer at the base of the pouch.. Handwritten on the back: 3/750133. DELVE S.J.E. On the inside of the closing flap: presence of very faded markings (unreadable)

The item is representative of utility pouches in use in the Commonwealth forces in the mid 20th century.Utility Pouch of rectangular web case. Of rectangular parallelepipped shape made of thick and sturdy fabric (canvas). The pouch is of faded olive colour.. Front view - Rectangular shape with overlapping closing flap with a press-stud fastener to maintain closed. Left and right views - Both sides are identical. Made of a one piece of fabric forming the base as well ("U" shape) Back view - Rectangular with metal hooks on the middle part for attachment to a belt. There is a Twigg buckle on the top part of the pouch mounted on another piece of canvass ending in a triangular shape. . Bottom view - ‘the fabric forming the base is also forming the sides of the pouch. Top view - closing flap overlapping on 3 sides and forming part of the back of the pouch. Inside view - The inside of the closing flap contains 3 small inserts (for special ammunition used in the firing of certain rifle grenade). There is excess fabric from the back panel that forms an additional layer at the base of the pouch..Inside of closing flap: has a circular (round) stamp with the arrow symbol. On the inside of the press button stud (closing mechanism) is inscribed 'United xxxxx Canada" (second word is not readable) There is evidence of writing on the internal face of the back flap (just under the connection with the top cover) but it is not readable. pattern 37, webbing

The 1964 Summer Paralympics, originally known as the 13th International Stoke Mandeville Games and also known as Paralympic Tokyo 1964, were the second Paralympic Games to be held. They were held in Tokyo, Japan, and were the last Summer Paralympics to take place in the same city as the Summer Olympics until the 1988 Summer Paralympics. The 1964 Games, although still formally an edition of the International Stoke Mandeville Games, were the first to use the term "Paralympic" in association with the event; the term "Paralympic Games" was approved by the International Olympic Committee (IOC) first in 1984, while the International Paralympic Committee (IPC) was formed in 1989. In contrast with the 1960 Games, many events had more than three participants, meaning that athletes were no longer guaranteed a medal upon completing their eventMetal and enamel badge.Front: Text: THE TOKYO GAMES FOR THE PHYSICALLY HANDICAPPED Image: White dove with silver chevron across its chest, on a red background. Text in border surrounding the image of the dove. Reverse: Unidentified kanji characters; the katakana for the word "sports"; English text "1964 TOKYO"1964 tokyo paralympics, paralympics

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s. A metal rod one centimetre diameter 61 centimetres long. On one end six centimetres is folded back to form a handle. On the other end 14 centimetres is flattened to a width of two centimetres and half a centimetre thick, the last six centimetres is bent to 90 degrees and has a one centimetre square hole in it. Part of the Harris Collection.harris collection, hand forged poker

Early twentieth form of 'safety' shaving device that followed cut-throat razors used in the nineteenth century. Cylindrical metal handle which screws into curved metal blade holder. Blade is missing.Noneshavers, shaving, personal grooming

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.2 pairs of handmade, adult brown leather boots, with decorative stitching, eyelets and stitched with waxed thread. Soles covered with hob nails in a decorative pattern. 1 handmade child's brown leather boot, with decorative stitching, metal eyelets, heel has patterned nails.bootlaces, boots

Three pieces of wood with one curved side and two angled sides that come together to form a circular shape. the tops have brass fittings that are attach by hinged mechanisms to a brass plate with a short three centimetre diameter thread on top. At the base of each is a long metal spike with an attachment to push in into the ground.surveying equipment, mapping, wooden trypod

Demonstrates how the SEC used enameled signs to convey instructions to passengers, and confirm the advice of the conductor.Enameled metal sign, black capital letters and border lines on an off- white background. Reverse enameled in black. Sign reads "Passengers must not travel in this compartment". The writing appears to have been stenciled over the white enamel base. The enameling has broken away from areas near the two screw holes formed to attach the sign to the compartment. An attempt has been made to address damage with paint. Enamel on reverse is marked where the sign appears to have been laying on a frame prior to firing. tramways signs, passenger information signs, enameled signs

Used by ESCo to enable identification of depot employees when travelling on the trams. Date made and when used unknown. Has hammer marks on rear of badge. See item 9038 for another example.Demonstrates a employee's free pass for travelling on Ballarat's trams.Handmade metal badge from brass sheet about 52 in diameter with a slot (long oval shape) about 23 long x 5 deep through which a leather strap about 100 long x 10 wide with a steel buckle is fitted. Stamped in capital letters on the badge are "BALLARAT TRAMWAYS" on the outside, "EMPLOYEES DEPOT PASS", in the centre of the badge, with the word "Employees" in a semi-circle. Near the bottom of the badge is the number "12", the one formed using an "I". The letters have been filled with a white paint.tramways, trams, esco, depot, employees pass, badges

The Australian Sports Medal award was instituted in the year 2000 and awarded for 2000 and 2001 before being discontinued. The medal has been reinstated for awards in 2020.The medal recognizes the efforts of a range of Australians, including former competitors, coaches, sports scientists, office holders and those who maintained sporting facilities and services.Australian Sports Medal and miniature and presentation box awarded to Val Campbell in 2000. The medal is a round shape of silver coloured metal suspended from a yellow ribbon with four green stripes. The design on the obverse is the five stars of the Southern Cross constellation above four horizontal lines. On the reverse are the same four horizontal lines as the obverse with the engraved words To commemorate Australian sporting achievement forming a half circle around the top edge and the words Valma Marion Campbell engraved above the four horizontal lines.The year 2000 is engraved below the four horizontal lines. A clasp to affix the medal to clothing is attached on the back of the ribbon. The miniature is a replica of the medal itself and is identical in every respect except for the engraved name on the reverse. The presentation box is encased in black leather like fabric and is padded on the lid with the words Australian Sports Medal stamped in silver. The box is line with white satin on the inside of the hinged lid with the medals resting in a moulded black velvet covered tray. Certificate accompanying the Australian Sports Medal and miniature and presentation box awarded to Val Campbell in 2000. 'To Valma Marion Campbell' See 11209.107recreations, sports, swimming

This tool is one of a collection of tools which are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and in 1865 Henry Phillips formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics’ Institute.This tool is of interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small plane tool with a rectangular body which is slightly curved. A metal blade resting on a piece of wood has been inserted at the top and protrudes at the base to form a planing blade. vintage tools, henry phillips, warrnambool, history of warrnambool

The wooden crate contains a set of patterns or moulds that were once used at Briggs’ Brass Foundry for making sand moulds. The traditional method of sand casting is over 2000 years old. It is part of a crafted process used to make brass and copper alloy goods suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-corrosive and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry display was one of the early ‘working craft’ shops at Flagstaff Hill. It included a historic Cornish chimney that was set up as a working model, telling the story of heat from furnaces to smelt metal, which would then be poured into the sand moulds. This chimney is made from specially curved bricks and is about two-thirds of its full height when originally located at the Grassmere Cheese factory. HISTORY of BRIGGS BRASS FOUNDRY: - The family business was founded in 1912 by Herbert Harrison Briggs (1963-1931) with his son George Edward Briggs, trading as Briggs & Son Foundry at 70 Wellington Street, Collingwood. Younger son Cyril Falkiner McKinnon Briggs joined the foundry in 1922, and it was renamed H H Briggs & Sons Foundry. Both sons ran the firm after Herbert’s death in 1931, making products mainly for marine purposes. They became Bell Founders in 1936 and were known for their specialty of high-quality ship bells. They produced miniature varieties of these and other decorative items such as small propellers. The firm became known as Briggs Marine Foundry. The great-granddaughter of Herbert Briggs inherited the Briggs Brass Bell, similar to the one at Flagstaff Hill. Cyril became the sole family member of the firm in 1965. The Briggs Marine was an exhibitor at the 1965 Boat Show, where he advertised as “non-ferrous founders” and “Bell Specialists”. The foundry relocated to Chesterville Rd, Moorabbin. Cyril passed away in 1967. It is thought that either Cyril or his business partner Frank Lee donated the objects from the Briggs’ Foundry around the time when the business moved to Moorabbin. However, Flagstaff Hill hadn’t been thought about until 1972. The donated items were registered in the Collection in 1986 but they could have been in storage from an earlier date. In October of that same year, Briggs Marine restored Schomberg Bell, a shipwreck artefact from the collection at Flagstaff Hill. Peter Oram, who had worked for the previous owners of Briggs Marine as a fitter and turner, took over the firm in 2014, reviving some of the old casts for current use. The business is now located at Seaford in Victoria and is part of Alliance Casting & Engineering Solutions (Alliance Casting Pty Ltd). In 2016 the original Collingwood Foundry building was repurposed as a thriving business hub named The Foundry. The crate and its patterns are significant for their association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. The patterns are associated with the long-running firm, Briggs Brass Foundry, that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine is also associated with the Schomberg Bell in Flagstaff Hill, restoring the bell to is former state to show an example of the bell from a luxury mid-19th century vessel. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. Wooden rectangular crate with removable wooden lid. Inside is a set of wooden patterns of various shapes and sizes for making sand moulds in a metal foundry. The crate is made from thick wooden planks nailed together. The extended wooden struts on the long sides form a frame to hold the wooden lid. A pair of metal handles are at each short end of the crate, fixed with strong metal bolds. Between each pair of handles is an inscription stamped into the wood. The underside of the crate has red paint splashes. There are insect holes in the wood but no sign of current infestation. Stamped: "H.33 / II" (H may be N or a square B)flagstaff hill maritime museum and village, great ocean road, shipwreck coast, pattern, mould, foundry, brass foundry, metal foundry, crate, box, wooden container, briggs, traditional method, trade, sand cast, cast, brass alloy, copper alloy, marine equipment, marine tools, marine fittings, briggs' bronze, copper tin zinc lead, non-corrosive, briggs family, brassware, metalware, foundering, metalwork, maritime, casting, cornish chimney, curved bricks, grassmere cheese factory, 1912, herbert harrison briggs, h h briggs, george edward briggs, briggs & son foundry, collingwood, cyril falkiner mckinnon briggs, cyril briggs, h h briggs & sons foundry, bell founders, schomberg bell, alliance casting & engineering solutions, collingwood foundry, ship chandlers, marine products, flagstaff hill, warrnambool, maritime museum, maritime village, briggs & son brass foundry, briggs marine, moorabbin

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century.Pattern; hexagonal wooden shape painted orange. The thick carved wooden shape is in halves forming a hole when locked together with the dowel pegs and opposing drilled holes. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, and nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together and neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.A pair of handmade, adult brown leather work boots, with brown leather laces, decorative stitching, metal eyelets and are stitched with waxed thread. The soles are covered with hob nails in a decorative pattern. They have metal caps on the heels. bootlaces, boots, footwear, clothing

The wooden patterns are part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. It may fit together with one of the other patterns with a similar outline. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; a pair of blocks that form a rectangle with a carved centre hole and disc shape inside. The block is made from laminated pieces of wood with cut corners. Both sides have four drilled holes in a square configuration but in different positions. The cut faces and the space carved into them are painted red; one piece has two dowel pins that fit into two drilled holes on the other. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

The design of the corkscrew may have been derived from the gun worm, which was a device from at least the early 1630s, used by men to remove unspent charges from a musket's barrel in a similar fashion. The corkscrew is possibly an English invention, due to the tradition of beer and cider, and the 'Treatise on Cider' by John Worlidge in 1676 describes "binning of tightly corked cider bottles on their sides", although the earliest reference to a corkscrew is, "steel worm used for the drawing of Corks out of Bottles" from 1681. In 1795, the first corkscrew patent was granted to the Reverend Samuel Henshall, in England. The clergyman affixed a simple disc, now known as the Henshall Button, between the worm and the shank. The disc prevents the worm from going too deep into the cork, forces the cork to turn with the turning of the crosspiece, and thus breaks the adhesion between the cork and the neck of the bottle. The disc is designed and manufactured slightly concave on the underside, which compresses the top of the cork and helps keep it from breaking apart. In its traditional form, a corkscrew is simply a steel screw attached to a perpendicular handle, made of wood or some other material. The user grips the handle and screws the metal point into the cork, until the helix is firmly embedded, then a vertical pull on the corkscrew extracts the cork from the bottle. The handle of the corkscrew allows for a commanding grip to ease removal of the cork. https://en.wikipedia.org/wiki/CorkscrewThis object is significant as an example of an item in common use since the late 17th century.Metal corkscrew with wooden handle that is partly broken. Has metal steel spike to create a starting point for the use of the corkscrew. Very rusty. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, corkscrew, beverages, kitchen equipment, bottle opener

all nurses at the Alfred Hospital were required to use these boxes to send uniforms to laundry, also all hospital staff who had uniforms supplied. (from previous catalogue): All nursing staff wore hospital supplied uniforms for much of the twentieth century. The Royal Melbourne Hospital ran the 'Central Linen Service' for during this time - doing all the laundry for all the public hospitals in Melbourne. Staff uniforms were laundered separately, everyone had their own numbered laundry case. Staff also had a small printed docket book with duplicate copies (complete with a piece of carbon paper) and the number of uniform items were detailed when the case was sent off to the laundry. Cases had to be in the 'laundry room' at a set time each week, clean laundry returned at the same time each week and it usually took 10-15 minutes to find your case in the very full laundry room the day it came back.Significant to the AHNL as all nurses were required to have one (from previous catalogue): The laundry box system shows what a complex and detailed system was required to keep staff clean and tidy.Brown heavy cardboard reinforced case and lid with locks on either end, plastic corner protectors, metal split pins, metal reinforced edges Both ends box identification number. A cross (X) formed by blue and yellow plastic tape and a navy blue round stickerThe Royal Melbourne Hospital Central Linen Service and Group Laundry (printed on white circular sticker) hand written number E171. Also old catalogue number. (from old catalogue)Sticker stating Royal Melbourne Hospital Central Linen Service and on outside number of box E 171 (E was the identifier of the Alfred) for identification purposes.ahnl, alfred hospital, nurses, uniforms, laundry cases, rmh central linen service and group laundry, hospital uniforms

Set of two ticket punches formed from pressed metal sheet, nickel plate finish, fitted with an internal wire spring inset to the handles, ticket retaining strip that punches a large rounded hole. Type was used in Melbourne during the Travel card era at stations and on trams to cancel tickets. A low cost unit. .1 - stamped "Made in Taiwan" .2 - stamped "China"trams, tramways, ticket punch, tickets, fares, conductors

Photograph of the Camberwell Kew Tramway Football club in 1931with 34 team members, some in football clothing, others in suits. Yields information about the members of the Tramway Football clubs. Photograph mounted and formed into a metal frame with a wall hanging piece of rear.tramways, sports, camberwell depot, kew depot, football

Badge -- metal with navy blue back and logo for the "Hawthorn Electric Tramways Club, founded 1916 and the letters HTEC formed into a central logo, indicated that the person was a member of the club, established primarily for social and welfare purposes. Stamped with the number 67 and "Stokes & Sons Melbourne" on rear.trams, tramways, badges, hawthorn depot, htt, personnel, welfare

Ticket punch formed from pressed metal sheet, nickel plate finish, fitted with an internal wire spring inset to the handles, ticket retaining strip that punches a large rounded hole. Type was used in Melbourne during the Travel card era at stations and on trams to cancel tickets. A low cost unit. This unit collected as it belonged to Paul Grech, See also Reg Item 2576 for other similar items.trams, tramways, ticket punch, tickets, fares, conductors

'Loren' (formerly James Hogg's house) is a two-storey gabled prefabricated house, constructed using broad-gauge corrugated iron and was originally erected at 60-62 Curzon Street, North Melbourne in 1853 for builder, James Hogg. By 1968 the building had deteriorated and it was dismantled and moved to Old Gippstown where it was re-erected and restored. The building's external framing system consists of exposed metal columns with Gothic panel motifs at the corners. Internally the timber framed walls have been finished with new papers over new Hessian. The corrugated iron roof has an unusual concave form and the windows, floors and doors are of moulded softwood. State historic significance as a rare type of iron prefab. house. Listed on the Victorian Heritage Register and covered by a Heritage Overlay, Latrobe City Planning Scheme. It is also listed on the Register of the National Estate.Tall square-shaped two-storey corrugated iron building with a curved corrugated iron roof with two outside brick chimneys. prefabricated iron houses, old gippstown, west gippsland, gippsland, gippsland heritage park, goldfields, coal mine, victorian era, moe, historical village, city of melbourne, north melbourne, curzon street, james hogg, prefabricated house, two-storey gabled prefabricated house, old gippstown heritage park, latrobe valley, loren, latrobe city council

The club was founded 1916. The letters HTEC have been formed into a central logo. The badge indicated that the person was a member of the club, established primarily for social and welfare purposes. See item 5178 for a set of rules and 5942 for another badge.Demonstrates a badge issued to members of the "Hawthorn Electric Tramways Club".Badge -- metal with navy blue back and logo for the "Hawthorn Electric Tramways Club. Has a steel ring through the eyelet or hole at the tope of the badge. Stamped with the number 67 and "Stokes & Sons Melbourne" on rear. tramways, trams, badges, hawthorn depot, htt, personnel, welfare

Pressed metal uniform badge for the Melbourne Tramways Board, workshop staff, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "Car Works" and number "25" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with wire. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons.trams, tramways, badges, employees pass, tb, workshops, tramway board