This photograph shows workmen with earthmoving equipment, installing the temporary, or 'portable', buildings that were the first used by the school. This was taken just days before the new school was to open.Black and white photograph featuring the final stages of the installation of the temporary school buildings for Newcomb High School, only daysnewcomb secondary college, school building, building, portable classroom, geelong advertiser

Repairing the portables, before the opening of the college in February 1969.

HAMILTON COLLECTION: Certificate awarded to Alexander John Hamilton by the Maryborough Branch of A.N.A. for first prize in Prepared Reading, at their 1901 Musical and Elocutionary Competitions. Printed on card in gold lettering with depiction of cherubs, flowers, maidens with bugle & Maryborough Civic Buildings. Markings - H. Thacker Lith. Geelong.person, individual, alexander john hamilton

HAMILTON COLLECTION: Certificate awarded to Alexander John Hamilton by the Maryborough Branch of A.N.A. for first prize in Humorous Recitation, at their 1901 Musical and Elocutionary Competitions. Printed on card in gold lettering with depiction of cherubs, flowers, maidens with bugle & Maryborough Civic Buildings. Markings - H. Thacker Lith. Geelong.person, individual, alexander john hamilton

HAMILTON COLLECTION: Certificate awarded to Alexander John Hamilton by the Maryborough Branch of A.N.A. for second prize in Recitation Gents Open, at their 1901 Musical and Elocutionary Competitions. Printed on card in gold lettering with depiction of cherubs, flowers, maidens with bugle & Maryborough Civic Buildings. Markings - H. Thacker Lith. Geelong.person, individual, alexander john hamilton

HAMILTON COLLECTION: Certificate awarded to Alexander John Hamilton by the Maryborough Branch of A.N.A. for second prize in Recitation Gents over 16 years at their 1901 Musical and Elocutionary Competitions. Printed on card in gold lettering with depiction of cherubs, flowers, maidens with bugle & Maryborough Civic Buildings. Markings - H. Thacker Lith. Geelong.person, individual, alexander john hamilton

HAMILTON COLLECTION: Certificate awarded to Alexander John Hamilton by the Maryborough Branch of A.N.A. for first prize in Patriotic Song, at their 1901 Musical and Elocutionary Competitions. Printed on card in gold lettering with depiction of cherubs, flowers, maidens with bugle & Maryborough Civic Buildings. Markings - H. Thacker Lith. Geelong.person, individual, alexander john hamilton

An illuminated address presented to James Henry Curnow, Esq., by the Committee of the Geelong Jubilee Juvenile and Industrial exhibition. Hand painted and written on card with committee members signatured, decorated with flowers and with scenes of Melbourne Exhibition building, sailing ship and bordered by a design in blue/grey.Markings - H Frank and Co, Geelong.person, individual, james henry curnow

Water coloured Postcards - set 5 of. Hebrew Synagogue, coloured image of synagogue on postcard, ornate scrolling on both sides of depiction. Postcard No.1 - Sandhurst Hebrew Congregation. Congregation established 1854, Synagogue consecrated September 1872 in Hopetoun Street. Building demolished 1926. No.2 - Ballarat. No.3 - East Melbourne. No.4 - Melbourne. No.5 - Geelong.Printed Valentine Sands, Melbourne.postcard, photograph, bendigo, sandhurst hebrew synagogue.

From the Victorian Heritage Register statement of significance H0791 The Marmalake/Murtoa Grain Store, originally the No.1 Murtoa Shed, is located within the Murtoa Grain Terminal, adjacent to the grain elevator tower and railway line. The shed is 280m long, 60m wide and 19m high at the ridge with a capacity of 3.4 million bushels. The hipped corrugated iron roof of the shed is supported on approximately 600 unmilled hardwood poles set in a concrete slab floor and braced with iron tie rods. These poles are the reason for use of the term "stick shed". With its vast gabled interior and the long rows of poles the space has been likened to the nave of a cathedral. An elevator at one end took wheat from railway trucks to ridge level where it was distributed by conveyor along the length of the shed, creating a huge single mound of grain. Braced internal timber bulkheads on either side took the lateral thrust of the wheat, and conveyors at ground level outside the bulkheads took wheat back to the elevator for transport elsewhere. Wheat had been handled in jute bags from the start of the Victorian wheat industry in the mid nineteenth century. Bulk storage had been developed in North America from the early 1900s. NSW began building substantial concrete silos from 1920-21. In Western Australia, farmers' co-operatives, who had to supply their own bulk storage from 1934-5, pioneered the use of low-cost horizontal sheds of timber and corrugated iron for bulk storage. Following its establishment in 1935 the Victorian Grain Elevators Board (GEB) planned a network of 160 concrete silos in country locations, connected by rail to the shipping terminal at Geelong. By the outbreak of the Second World War there was a worldwide glut of wheat, and Australia soon had a massive surplus which it was unable to export. Only 48 silos had been established under the Victorian Silo Scheme so far, and wartime material and labour restrictions prevented progress with this scheme. The storage deficit had become an emergency by 1941 as Britain obtained its imports from North America, rather than over the lengthy and difficult shipping route from Australia. In 1941 the GEB, under chairman and general manager Harold Glowrey, proposed large temporary versions of the horizontal bulk storage sheds already in use in Western Australia. The proposal was approved by the Victorian Wheat and Woolgrowers Association, who considered the use of shed storages as a longer term proposition. After initial resistance from the Australian Wheat Board, some of whose members represented wheat bagging interests, the Commonwealth and Victorian governments agreed to split the costs, and Murtoa was chosen as a suitable site for the first emergency storage. The main contractor, Green Bros, commenced work on the No.1 Murtoa Shed in September 1941, deliveries of bulk wheat began in January 1942, and the store was full by June of the same year. In the following years the Council for Scientific and Industrial Research (later CSIRO) conducted valuable research and experiment on the impacts and control of insect pests at the Murtoa No.1 shed. With these discoveries, and the development of more effective pesticides, use of the No.1 shed and the larger No.2 shed, erected in 1942/43, continued for many years. The No.2 shed was demolished in 1975. By the 1990s, pest resistance to pesticides and requirements for both pest free and insecticide free grain rendered open storage of this type unviable. The No. 1 store was also becoming increasingly expensive to maintain, and its use was phased out from 1989.Image of the Marmalake/Murtoa Grain Store which is of historical, architectural, scientific (technical) and social significance to the State of VictoriaDigital colour image of the interior of the Marmaduke . Murtoa grain storage facility better known as the Stick Shed. The shed was constructed in World War Two to store grain. The supporting columns are trees.marmalake, murtoa grain store, wheat store, stick shed, murtoa

The seaside town of Geelong is the second largest city in Victoria, Australia.An image of a number of multi-storey buildings that made up the Geelong Civic Precinct in 1934. geelong

historic, buildingB/w photograph, Buninyong Shire Hall, Mt. Clear, Cnr Geelong Rd & Green Hill Rd., built by Richard Rennie 1869, demolished 1915, architect J.A.Doane.buninyong shire, shire hall, rennie, doane

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

Track cycle built by Eugene Cowley in 1949 for Ken Jenkin from the Geelong Amateur Cycling Club.Gene Cowley began building cycles in the 1890s and continued until the middle 1950s. He was the first president of the Geelong Amateur Cycling Club.Velos Track and Road Cycle. It has a steel frame, steel rims, rubber tyres, Brookes saddle, pedals with toe straps, handle bars for track racing and dual brakes. This machine is equipped with an early derailler gear- note change lever on down tube. The frame is painted grey and has a Velos badge on the seat stem and a V in white with a red background on the head stem. The word Velos is also outlined on the frame in white with red shadowing."Velos/V"ken jenkin; eugene cowley; geelong amateur cycling club; track cycle; velos track and road cycle; brookes saddle; geelong cycling club;

The Wesleyan Church, Denham Street in Lower Hawthorn, as the area was then called, was opened on 2 May 1886. The building was designed by Geelong architect William Henry Cleverdon and was built of brick in the Gothic style. Its dimensions were 55 x 33 ft and the façade incorporated a rose window and spire 50 ft high. A wooden vestry was placed to the rear. The building and the organ were seriously damaged by fire on 1 April 1970, started by a painter's blowtorch. The church was not rebuilt.B & W photograph of a group of young men standing and sitting with the minister outside the Methodist Church in Denham St. Hawthorn.denham street methodist church, organ, hall

The Wesleyan Church, Denham Street in Lower Hawthorn, as the area was then called, was opened on 2 May 1886. The building was designed by Geelong architect William Henry Cleverdon and was built of brick in the Gothic style. Its dimensions were 55 x 33 ft and the façade incorporated a rose window and spire 50 ft high. A wooden vestry was placed to the rear. The building and the organ were seriously damaged by fire on 1 April 1970, started by a painter's blowtorch. The church was not rebuilt.B & W photograph of a group of 8 tennis players standing in front of a tennis pavilion. denham street methodist church, organ, hall, tennis

The Wesleyan Church, Denham Street in Lower Hawthorn, as the area was then called, was opened on 2 May 1886. The building was designed by Geelong architect William Henry Cleverdon and was built of brick in the Gothic style. Its dimensions were 55 x 33 ft and the façade incorporated a rose window and spire 50 ft high. A wooden vestry was placed to the rear. The building and the organ were seriously damaged by fire on 1 April 1970, started by a painter's blowtorch. The church was not rebuilt.B & W photograph of a group of 8 men and women with 2 ministers, sitting and standing outdoors. The group was probably from the Denham St. Methodist Church.denham street methodist church, organ, hall, tennis

Rev Allan McVean was instrumental in building a Church in Geelong shortly after he arrived in Australia in 1852. In 1854 he moved to Brunswick and Coburg where he worked for 40 years. He was Moderator of the General Assembly in 1880-1. He was also Convenor of the Board of Examination. He died in 1896. [Source: Proceedings of the General Assembly of the Presbyterian Church of Victoria 1895-97]Mounted on card. Signed by the Chairman of Managers and the Secretary, Kilmore 20th May 1866.rev allan mcvean, brunswick presbyterian church, rev alan macvean

Rev Allan McVean was instrumental in building a Church in Geelong shortly after he arrived in Australia in 1852. In 1854 he moved to Brunswick and Coburg where he worked for 40 years. He was Moderator of the General Assembly in 1880-1. He was also Convenor of the Board of Examination. He died in 1896. [Source: Proceedings of the General Assembly of the Presbyterian Church of Victoria 1895-97]Illuminated testimonial with blue, green, red and gold decorative borders. It is signed by Members of Session and the Committee of Management of the Brunswick Presbyterian Church. rev allan mcvean, brunswick presbyterian church, rev alan macvean

The Wesleyan Church, Denham Street in Lower Hawthorn, as the area was then called, was opened on 2 May 1886. The building was designed by Geelong architect William Henry Cleverdon and was built of brick in the Gothic style. Its dimensions were 55 x 33 ft and the façade incorporated a rose window and spire 50 ft high. A wooden vestry was placed to the rear. The building and the organ were seriously damaged by fire on 1 April 1970, started by a painter's blowtorch. The church was not rebuilt.B & W photograph of the interior of the Denham St. Methodist Church Hall, Hawthorn. The photograph is taken from the seating area towards the stage, which is furnished with an organ, an upright piano, a table and chairs.denham street methodist church, organ, hall

The Wesleyan Church, Denham Street in Lower Hawthorn, as the area was then called, was opened on 2 May 1886. The building was designed by Geelong architect William Henry Cleverdon and was built of brick in the Gothic style. Its dimensions were 55 x 33 ft and the façade incorporated a rose window and spire 50 ft high. A wooden vestry was placed to the rear. The building and the organ were seriously damaged by fire on 1 April 1970, started by a painter's blowtorch. The church was not rebuilt. The organ was built in 1900 by E. Cornwall Cook, of Barrington Place, Burwood Road, Hawthorn. It was opened on 8 August 1901 by George Peake. The Swell strings may have been added (or substituted for earlier material) by Frederick Taylor, whose workshop was nearby in Burwood Road. At some stage the colourfully decorated façade pipes were repainted in a gold finish. The organ was badly damaged in the 1970 fire and the metal pipes were sent to Hill, Norman & Beard who melted them down for scrap.B & W photograph of the interior of the Denham St. Methodist Church, Hawthorn. Mounted on card.denham street methodist church, organ, hall, e. cornwall cook, george peake, norman & bead, frederick taylor

Shows roads, railway, power lines, buildings and emergency locations. Lists property owners.mapsgeelong, regional victoria, fire protection

Rev. William P. Wells (1826 - 1895) Born Marton, Lincolnshire 1826. Probationer of the English Methodist Conference 1850. Appointed to a mission circuit in Newfoundland. Returned to England in 1852. Sent to Melbourne in 1854. President of the South Australian Conference and later President of the Victorian Conference. President of Prince Alfred College, South Australia. Started the Methodist Building and Loans Fund. Codified Methodist laws and regulations. Served as minister in Castlemaine, Melbourne West, Melbourne East, Geelong, St. Kilda, Sandhurst, Hawthorn. Died 21 December 1895.Sepia toned head and shoulders oval inset studio portrait of the Rev. William P Wells.rev. william p. wells, president of conference, prince alfred college, methodist, minister, building and loans fund

William C. Tippett (1879 - 1940). Ordained in 1904. Stationed at: Lorquon, Daylesford, Foster, Cohuna, Omeo, Maldon, Geelong, Castlemaine. Chairman Castlemaine and Maryborough District. South Melbourne Mission, North Melbourne Mission.B & W full length photograph of the Rev W.C. Tippet, dressed in a 3 piece suit and homburg hat standing beside a weatherboard building.rev william c. tippett, methodist, minister

Rev. Farquhar Chisholm (1878 - 1953), Presbyterian minister, was born in Inverness, Scotland and ordained in 1908 in Kerang. He was a minister in country Victoria and Ballarat and was chaplain of Scotch College from 1919 - 1926. Farquhar Chisholm organised the building funds for Morongo Presbyterian Ladies' College Geelong and the Freemasons' Hospital and was a past grand chaplain of the Masonic Grand Lodge.Matte, black and white studio head and shoulders portrait of Rev. Farquhar Chisholm who is looking to his right and wearing his clerical collar. There is pencil and ink hand writing on the back of the photograph.rev farquhar chisholm, south melbourne presbyterian church, masonic lodge, morongo presbyterian ladies' college geelong, scotch college melbourne