Black and White Negative of Mr & Mrs Errey from Hazeldene Negative Black white. Scanned at 600 dpi.first, settlers, house, errey, hazeldene, sandy ross

This looks like a typical Bush Timber Mill of the period, E Lloyd's Mill, Hoddles Creek Negative Black white. Scanned at 600 dpi. There are five men at work at the mill and also a lady sitting on the front verandah of the nearest hut, possibly mending some material , there are 2 other. hutse lloyds mill timber workers women hoddles creek logs sandy ross

Braces - straps worn over shoulders for holding up trousers http://en.wikipedia.org/wiki/Suspenders Suspenders (Am. English) or braces (British English) are fabric or leather straps worn over the shoulders to hold up trousers. Straps may be elasticated, either entirely or only at attachment ends and most straps are of woven cloth forming an X or Y shape at the back. Braces are typically attached to trousers with buttons using leather tabs at the ends or, incorrectly according to traditional protocol, clips.. HISTORY the modern type were first invented in 1822 by Albert Thurston and were once almost universally worn due to the high cut of mid-nineteenth and early twentieth century trousers, a cut that made a belt impractical. After losing popularity in the first World War, as men became accustomed to uniform belts, suspenders were still standard throughout the 1920s. TODAY http://www.fabsugar.co.uk/Love-Hate-Trousers-Braces-1585776 Androgynous fashion nearly always appears on the catwalk and trousers with braces made an appearance this season at Paul Smith...Grey Elastic braces forming a y shape at the back, with leather tabs to hold clips and braided loops to attach to buttons on trousers. trousers, braces, straps

These Enamal wash basins could be found in most homes, shacks and tents, up untill the use of internal plumbing and sinks.Green enamel basinenamal basin wash water soap personal hygene

Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang

Cream case for Cut Throat razorrazer cut throat case

Marking Gauges have been around for centuries in wood working shops, and is used to mark parallel lines on wood, either along the grain or across the grain, across the grain leaves a more jaggard line.This simple tool allowed Crafts or Trades people to consistently and accurately make parallel lines.Wooden Marker Part 1 - Marker Part 2 - Wooden screw Part 3 - Moving .....wood worker, carpenter, cabinet maker, gauge, mark, joints, mortice & tennon

A wooden Mallet could be found in most homes, and nearly all tradesmans tool box or bag, its most common use was working with wooden handled wood Chisels, because they did not damage the end of the chisel like a steel headed hammer,also they were used to fit joints of wood together as they would not damage the timber like steel hammers......Wooden mallets were also used by stone masons back to the time of the pyramids, but they were usually shaped differentlyWooden Mallet A handmade wooden mallet with a handle with a rectangular head. Carved ET on sidewood, mallet, tradesman, carpenter, cabinet maker

Pair of Girls School Boots, made with leather,they are lace up boots with 8 eyes at the bottom and 6 loop at the top for the laces.girls boots, footware, feet, protection

Pair of black leather girls boots, they have been embossed at the start of the toe cap, and would be more expensive than plain leather.girls boots, footware, feet protection

Biscuit tin - Horse race

Black and white negative of Arthur Witnish's horse team hauling timber across bridge on Black Sands Road. Negative Black white. Scanned at 600 dpibridge, timber, arthur witnish, horse team, tramway, black sands creek, timber truck, gladysdale

A person wanting to dig for Gold or any other precious metal were required to register a claim on the land to be mined, the claim had to be measured & pegged to be specific as to its size and shape.Certificate Miners Claim No 058gold, document, certificate, miners claim

Account Shaw's bakery,Warburtonsales record f j shaw family baker west warburton

Porcelain Ink well school equipment porcalain ink well

The Dovetail Joint probably pre-dates written History. Some of the earliest known examples of the Dovetail Joint are in furniture entombed with Mummies dating from the first Dynasty of ancient Egypt as well as the tombs ofChinese emperors. Untill the late 1960s it was commonly used for Joining drawer fronts and sides in cabinets. " Wikipedia "Dove Tail Saw , Shefield mark saw dovetail woodwork drawers

Wooden Spirit Level

Pair Hob Nail boots, hand made by Oliver & Stevensfootware, feet, protection, hobnail boots

Packet of Shoe Tingles or Tacksshoe tingles packet tacks

Wooden shoe stretchershoe stretcher wood metal leather

Printed invitation one of 4 invitaions in the set ,to invite Mr & Mrs H. H. Bradley from His Majesty's Ministers of State for Australia to Celebrtae the Opening Parliament of the Commonwealth of Australia to meet their Royal Highness The Duke and Dutchess of Cornwell and York. To an evening reception at the Exhibition Building Melbourne on the 9th of May 1901, at 8 o'clockSignficant collection of 4 invitatons of national signficance Plus a printed Momento from the Duke and Dutchess 00533 Evening reception to Meet the Duke and Dutchess 00534 Invitaion from the Govenment of Victoria 00535 Invitaion from Edmund Barton the Prime Minister 00536 Invitaion from the Govenment of Victoria for a conversazione 07/05/1901 at 8 pmMounted offset print. The print is mounted on brown mount board. The print has an embossed seal of Duke and Dutchess of Cornwall and York. Printed invitation from the miniters of state to invite Mr and Mrs H H Bradley to attend the reception.Invitaion hand written. On the left is a maiden , dressed in red with a helment carrying a British Shield on the Right hand side is a maiden dressed in purple carrying a St shield . The print is bordered by vines and leaves with scrolls for text details. The print has silver and gold highlights.Printed: His Majesty's Ministers of State for the Commonwealth of Australia/ request the honour of the presence of... / in the Exhibition Building, Melbourne, on Thursday, 9th May, to witness/ the Opening of the Parliament of the Commonwealth./ Edmund Barton/ Prime Ministermelbourne, australia, commonwealth, printed offset, invitaion, celebrate opening parliament commonwealth australia, parliament, duke dutchess cornwall york, mr mrs h h bradley, exhibition building, 1901, 09 05 1901

painted for Nell McCleanPink rose in full bloom with buds and foilage on light green back ground . On cardboardpainting by mrs p artis home hotel nell mcclean

This book is a memento of the visit of the Duke and Duchess of Cornwell and York to Melbourne in May 1901, they came here to open the first Commonwealth Parliament of AustraliaThe book is part of a collection from the H H Bradley family, the other items are personal invitations to the opening of the first Parliament.Paperback Book. an 80 page book with soft card covers bound with green cloth binding, mainly pictorial, of their visit to opening of the 1st Commonwealth Parliament of Austrlia with a description with each photo in black and white, the cover is partly dark brown with the rest there is a photo of a river on the bottom right hand corner and the book title on the left within a scrolled frame and the dark brown background. front and back cover quite grubby, bottom right had corner missing and torn 20+20mm, a finger nail size missing middle right hand side, bottom left hand corner next to binding has a 22+25mm Piece missing

Mr George Potter Manager of the Victorian Hardwood Company mill at Powelltown is sitting in centre of photograph Image of three fallers with axes and two others around stump of large tree. Black and white photograph A3 mounted on cardboardrear of photo, writen description; central figure is Mr George Potter Manager VHC Powelltown Died c1949 presented by Mrs A G Potter daughter in-law of above 76 Bluff Rd Black Rock axe, ferns, powelltown, timber, fallers, george potter, victorian hardwood company

Workmen at E. Lloyd's mill, Hoddles Creek Negative Black white. Scanned at 600 dpi. mill, timber, lloyds, workmen

Negative Black white Scanned at 600 dpi. The Saxton family, 1923, Gilderoysaxton family fruit growers timber workers sandy ross gilderoy 1923

The "Express" is pulled by the Little Yarra steam train, and is on a wooden trestle bridge crossing the Saxton creek at Gilderoy, the carriage on the end was for passengers, but it was only used for a short timePowelltown Express 1914 Gilderoy. Negative Black white Scanned at 600 dpi. trestle bridge tramway powelltown steam engine saxton creek gilderoy a ross

The steam train "Powellite" at three bridges station pushing a flat top and guards/passenger carriage to Powelltown, there is a load of flour in bags and extra passengers on the flat topThree Bridges Railway station Negative Black white Scanned at 600 dpi.three bridges railway station steam train powellite a ross

Negative Black white Scanned at 600 dpi. Mr. Hilditch Snr. Hazelwwod Rd, Warburton Rdmr hilditch snr hazellwood rd warburton rd

DWR-00286 Details of Timber truck ironwork, Victorian Hardwood Company, Powelltown, 1919. Blue Print.Victorian Powell Wood Process Ltd details of timber truck ironwork scale 1 1/2" -3" = 1 foot Sheet No 17 11/07/12 Note:- the number off each part are for one wagon only