This shirt was manufactured in 2004, and was presumably owned by a Beechworth local service personnel by the name of Cross. This piece of clothing would have been worn as part of the standard Royal Australian Naval Ratings uniform.White short sleeved shirt. Square collar with thin navy blue trim. A curved slit on either side of the lower edge (near the hip area) and an extra piece of fabric within each slit. A white label with inscriptions is stitched to the seam in the middle of the lower back seam. This has n written inscription beneath on the shirt fabric.Inscriptions on the label: CAN'T TEAR 'EM 8405-66-132-3767 R.A.N 2004 SIZE: 117 35% COTTON 65% POLYESTER GENTLE WARM MACHINE WASH. RINSE WELL. WARM IRON. DO NOT SOAK. DO NOT BLEACH. DRY CLEAN (A) MADE IN AUSTRALIA Written inscription under label: CROSSshirt, naval ratings, royal australian navy, navy

Uniform issued to "LOCKYER" 114493.Jacket - khaki colour wool serge fabric, Battle dress style, belted at waist with metal buckle. Dark green plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder epaulettes - rank three pips, red, cream and brown embroidery for Captain. Shoulder sleeve insignia, red fabric with dark blue embroidered lettering. "ROYAL AUSTRALIAN ARMY/ ORDNANCE CORPS". Green colour cotton twill fabric pocket and waist lining, manufacturers white cor=tton label inside pocket lining. 2. Trousers - khaki colour wool serge fabric, Battle Dress style, with fob pocket, two side pockets, one back pocket with concealed button down flap. Green colour polyester fabric lining with manufacturers white cotton label inside on back pocket, 6 button fly. Manufacturers information on labels - black ink print. 1. "A.G.C.F./ VIC 1977/^ /8405.66.025.6423/ SIZE OF CHEST/ SIZE 109/ 112PR/ YARRA FALLS 69/ BATCH, 21657/ DRY CLEAN ONLY/ CREASE UPPER/ HALF OF LAPELS ONLY/ NO./ NAME" Handwritten - blue ink pen - "LOCKYER/ 114493". 2. CONWAY BROS. PTY LTD/ ADELAIDE ^ 1968/ CLASS 8405-66-025-6199/ Y.F. PP2/ SIZE & WAIST 41PR/ MATCHING JACKET 43/44 P.R. / Dry Clean only/ Repress on original seams/ Creases set by Si-ro-set./ mending patch attached/ NAME/ ARMY NO." Handwritten black ink pen "LOCKYER/ 114493"uniform, army, battle dress, lockyer

For Service History Refer Cat No. 7877.6.1. Jacket - dark blue colour wool/polyester fabric. Mess Dress style winter collar and long lapels, shoulder epaulettes with Sqn Leader Rank slides - crown and wings. Three rank stripes and "AUSTRALIA" in gold metal and fabric. Gold colour plastic buttons with shank and metal pins. Raised emblem, crown and wings - RAAF. Lining dark blue polyester fabric. White cotton manufacturers label. 2. Trousers - dark blue colour wool/polyester fabric. Fob pocket, two inset side pockets and one back inset pocket. Nylon and metal zipper fly with metal hook closer. Dark blue polyester fabric lining to waistband and pockets. Manufacturers label. 3. Belt - black colour polyester/cotton webbing with metal slide buckle. 4. Cummerbund - dark blue colour elastic fabric, broad sash with hook and loop (Velcro) tape to adjust length. Manufacturers label.Manufacturers information - black ink print. 1. "TRANS TAILORING/ CANBERRA/ EST. 1994/ JOB NO./ RANK/ NAME/ 70% WOOL 30% POLY/ DRY CLEAN ONLY/ REPRESS WITH DAMP CLOTH/ DO NOT SITO SET." 2. "R76/ADA/ 66-2009/ NSN: 8405 66 146 6560/ SIZE: 100S /WAIST: 100 SEAT: 115/ SERVICE NO:/ NAME:/ LAUNDRY INSTRUCTIONS/ 70% WOOL 30% POLYESTER/ DRY CLEAN ONLY/ REPRESS WITH DAMP CLOTH/ WARM IRON/ DO NOT SIRO SET. 4. "ADI/^ /VIC 1992/ 8440.66.035.3818/ SIZE 38" Handwritten black ink pen. 1. "4573/ SQNLDR/ WRIGHT" 2. S. WRIGHT.uniform, raaf, mess dress, winter, s. wright

A washboard is a tool designed for hand washing clothing that are soaked in hot soapy water in a wash tub or sink, then squeezed and rubbed against the ridged surface of the washboard to force the cleaning fluid through the cloth to carry away dirt. With the invent of mechanized cleaning of clothing becoming more common by with the use of washing machines by the end of the 20th century the washboard was soon discontinued. The traditional washboard is usually constructed with a rectangular wooden frame in which are mounted a series of ridges or corrugations for the clothing to be rubbed upon. For 19th-century washboards, the ridges were often of wood, sometimes glass and by the 20th century, ridges of metal became common The first "fluted" metal washboard was patented in the United States by Stephen Rust in 1833 and Zinc washboards were predominantly manufactured in the United States from the middle of the 19th century. A significant item for cleaning clothes still in use today in many countries giving a snapshot into the domestic life of a housewife into the 20th century.Washboard wooden frame with a ribbed glass sectionNonewarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, washboard, glass ripples, clothes cleaning, washing, laundry

Bottled Phenyle cleaner was used throughout the 1900's in domestic kitchens, toilets and other "clean, germ free" environments. Some of these environments would encompass dairying milk handling rooms and hospital kitchens and ablution areas. It is a product which has resulted in the poisoning of some unwitting users (newspaper accounts of a woman in 1928 who drank some phenyle mistakenly for wine and died). The reliance of effective poisonous cleaning products in kitchens, especially in the 1900's was and is still a very hazardous element that the "most pivotal place in a house" contains. In the era when this particular bottle was used (1920's) the main means where consumed around the kitchen table, and this was especially so in rural areas. Keeping this area "germ" free was a mandatory requirement.This bottle is significant to the Kiewa Valley because this area was mostly rural with "out houses" and milk collection areas that required that "extra attention" of sanitation. Rural areas also where more prone to have the kitchen area as a general meeting place for the family before dinner and other meals. Sanitation was of greater importance in rural areas, due to the greater distances to hospitals and doctors if contamination occurred. City homes at this time frame had lounge rooms for the daily get together of the family unit. This was an era before the television and computer age fragmented and isolated family members from one another. This was a time that family members grouped together in the kitchen to find out "the latest news".This amber glass, diamond shaped bottle with cork stopper once contained Phenyle. Phenyle is a highly poisonous liquid. The amber opaque glass was used and not a clear glass to highlight it's content. It has a cork stopper at the top of a slender neck. All the glass embossed writing is highlighted by a string of crosses. The cross was used to enforce a visual danger sign.On one side "THIS BOTTLE IS THE PROPERTY OF" and in large print underneath "KITCHEN'S" and below this and underlined "POISONOUS". On the next side "NOT TO BE TAKEN" and next side in very large print and surrounded by a border "PHENYLE" with crosses enclosing it. On the bottom of a "blank side is "REGd. No. 2140" On the base is M 959 and Mkitchen cleaners, food preparation area, ablutions

This bottle of liquid floor polish was manufactured before 1960(taken over by Wattyl) in a period when most of the floors in high traffic areas were covered in linoleum. Most of the floors using this product during this period would have been kitchens and laundries. During this period the cleanliness of the kitchen, hallways and eateries had to appear clean (cleanliness was a sign of a bacteria free area). This was a priority for kitchens, mess areas(SEC Hydro Scheme facilities) and connecting walkways. The cleanliness attitude was enhanced in the rural areas due to the "dirty" farm work not impinging upon the residential home.When Mount Beauty was first inhabited all the residential and worker's facilities were a prime area for linoleum floor surfaces. The liquid floor polish was in great demand, "a polished floor is a clean floor".This bottle of liquid floor polish is very significant to the Kiewa Valley, not only that it covers the floors of every home and residential barracks of the first major development of a "town" now known as Mount Beauty but also it demonstrates that the "cleanliness" approach of early Australians living areas in the rural regions was "on par" with its city cousins. It is the smaller types of mores that underlie the "mushrooming" cultural and psyche "wholeness" of an ever expanding Australian culture.This brown opaque glass bottle with an oblong shape has a blue coloured "screw on" cap. It has a "wrap around" label glued firmly on the bottle and covers the front and sides.On the front main label under a red line, "SPARTAN" underneath in smaller print "For use on" below this, "LINOLEUM, RUBBER, COMPOSITION AND HARDWOOD FLOORS" besides this is an encircled Trade Mark of a "Spartan Warrior holding a spear and shield" these word follow the curviture of the circle and are below it "TRADE MARK REGISTERED" Below this are "SUPER FLOOR GLOSS" to the left in very small print "Nett Contents 16 Fluid Ounces". Below this on a blue background and in white print"LIQUID FLOOR WAX WATER REPELLENT". On the bottom of the label "Made under licence by HARDIE TRADING LIMITED for SPARTAN PAINTS PTY, LIMITED" below this in small print "Melbourne, Sydney, Adelaide, Brisbane, Perth, Hobart, Launceston, Geelong. Embossed on the bootm of the glass is" G/Mfloor cleaners, liquid polish, "hygienic" clean floors.

A washboard is a tool designed for hand washing clothing that are soaked in hot soapy water in a wash tub or sink, then squeezed and rubbed against the ridged surface of the washboard to force the cleaning fluid through the cloth to carry away dirt. With the invent of mechanized cleaning of clothing becoming more common by with the use of washing machines by the end of the 20th century the washboard was soon discontinued. The traditional washboard is usually constructed with a rectangular wooden frame in which are mounted a series of ridges or corrugations for the clothing to be rubbed upon. For 19th-century washboards, the ridges were often of wood, sometimes glass and by the 20th century, ridges of metal became common The first "fluted" metal washboard was patented in the United States by Stephen Rust in 1833 and Zinc washboards were predominantly manufactured in the United States from the middle of the 19th century. A significant item for cleaning clothes still in use today in many countries giving a snapshot into the domestic life of a housewife into the 20th century.Washboard wooden frame with a ribbed glass sectionMarked "Possum Brand"warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, washboard, glass ripples, clothes cleaning, washing, laundry

Iron was heated on top of stove. Often the person ironing had two irons - one to iron with and the other heating on stove ready to use when the other cooled down. They were heavy to use and were generally cleaned with bees' wax and a cloth before use. Wooden handles were patented in 1865.This item is an example of a domestic appliance in common usage before the advent of electricity.Small rusty flat iron.domestic iron flat-iron

The barometer was either made or sold by T. Gaunt & Co. of Melbourne, a manufacturer, importer and retailer of a wide variety of goods including jewellery, clocks and watches, navigational and measuring instruments, dinnerware, glassware and ornaments. Thomas Gaunt photograph was included in an album of security identity portraits of members of the Victorian Court, Centennial International Exhibition, Melbourne, 1888. (See below for further details.) Admiral Fitzroy Pattern Barometer History: The stick mercury barometer was named after Admiral Robert Fitzroy of the Royal Navy (1805-1865) for his detailed instructions on how to interpret the weather, which were included with the instrument. Fitzroy was the captain of the HMS Beagle, also a weather forecaster to Charles Darwin and the second Governor of New Zealand. He developed many different types of barometers and was the first person to introduce the science of weather forecasting to the British Isles. A local manufacturer of scientific instruments, Thomas Gaunt, produced the barometer that was adapted for the southern hemisphere by Robert Ellery, the State Astronomer based at the Melbourne Observatory. In the original sale catalogue for Gaunt's, the item is described as "Gaunt's Fitzroy Barometers" and it was priced from 25/- to ₤9.9s. History of Thomas Gaunt: Thomas Gaunt established Melbourne's leading watchmaking, optical and jewellery business during the second half of the 19th century. Gaunt arrived in Melbourne in 1852, and by 1858 had established his own business at 14 Little Bourke Street. Around 1869 he moved to new premises in Bourke Street on the corner of Royal Arcade. Gaunt's shop quickly became a Melbourne institution. Gaunt proudly advertised that he was 'The only watch manufacturer in the Australian colonies'. While many watches and clocks may have had Gaunt's name on the dial, few would have been made locally. Gaunt did make some watches for exhibitions, and perhaps a few expensive watches for wealthy individuals. Gaunt's received a telegraph signal from Melbourne Observatory each day to correct his main clock and used this signal to rate and repair ship's chronometers and good quality watches. His main horological manufacturing was directed at turret clocks for town halls, churches and post offices. These tended to be specific commissions requiring individualised design and construction. He made the clock for the Melbourne Post Office lobby, to a design by Government Astronomer Robert Ellery, and won an award at the 1880-81 Melbourne International Exhibition for his turret clock for the Emerald Hill Town Hall. He became well known for his installation of a chronograph at Flemington Racecourse in 1876, which showed the time for the race, accurate to a quarter of a second. The firm also installed the clockwork and figures for Gog and Magog in the Royal Arcade. Thomas Gaunt also developed a department that focused on scientific instrumentation, making thermometers and barometers (from imported glass tubes), telescopes, surveying instruments and microscopes. Another department specialised in electroplating for trophies, awards and silverware, and the firm manufactured large amounts of ecclesiastical gold ware and silverware, for the church including St Patrick's Cathedral. There are no records that disclose the number of employees in the firm, but it was large enough for Gaunt to hold an annual picnic for the watchmakers and apprentices at Mordialloc from 1876; two years previously they had successfully lobbied Gaunt to win the eight hour day. Gaunt's workforce was reportedly very stable, with many workers remaining in the business for 15 to 30 years. Gaunt's wife Jane died on September 1894, aged 64. They had one son and six daughters, but only three daughters survived to adulthood. Two became nuns at the Abbotsford Convent and one daughter, Cecelia Mary Gaunt (died 28 July 1941), married William Stanislaus Spillane on 22 September 1886 and had a large family. Gaunt died at his home in Coburg, Victoria, leaving an estate valued at ₤41,453. The business continued as T. Gaunt & Co. after his death. The barometer is historically significant as an example of the work of Melbourne’s leading scientific instrument maker, Thomas Gaunt. The barometer has social significance as an example of the type of scientific equipment that Thomas Gaunt expanded his horology business into producing. Further social significance lies in the fact that Robert Ellery, the Government Astronomer who designed the local version of the barometer, had a direct connection with the Melbourne Athenaeum founded in 1839 as the Melbourne Mechanics' Institution. Its purpose was "the diffusion of literary, scientific and other useful information". There are also records of a T Gaunt as a subscription and committee member of this the Athenaeum organisation during the 1870s and 1880s which may be Thomas Gaunt, unfortunately still unverified.Stick mercury barometer known as the Admiral Fitzroy Barometer. It comprises an oblong wooden case with glass front panel, ornate pediment, barometer with bulb cistern (empty of fluid), cleaning brush with printed instructions for interpreting information given by the gauge affixed to left and right face of instrument. Includes a thermometer. The barometer appears to be intact. Adapted to the Southern Hemisphere. Special remarks by Admiral Fitzroy. Made by Thomas Gaunt, Melbourne. Manufacturer's details are on back of wooden casing. Rear has upper and lower brass screw plates for securing to vertical surface."Manufactured by Thomas Gaunt, 14 Little Bourke Street, Melbourne. "flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, barometer, admiral fitzroy, thomas gaunt, thomas gaunt of melbourne, clockmaker, admiral fitzroy barometer, barometer instructions, gaunt’s fitzroy barometer, gaunt’s of melbourne, gog and magog designer, horological manufacturer, meteorological instrument, melbourne athenaeum, melbourne mechanics' institution, melbourne observatory time signal, robert ellery government astronomer, scientific instrument, stick mercury barometer, thermometer, weather forecast, t gaunt & co

The brass letter “A” is from the starboard bow of the FALLS OF HALLADALE, a 2085-ton iron-hulled and four-masted sailing ship that was wrecked near Peterborough on 14 November 1908. Two companion pieces, the letters “S” and “D”, are also in the Flagstaff Hill Maritime Village collection of shipwreck artefacts (as registered numbers 748 and 6596). The ship’s name originally appeared in these impressively large brass letters across the stern and both port and starboard bows of the vessel. The FALLS OF HALLADALE was built in 1886 by Russell & Co at their Greenock shipyards on the River Clyde. She was the seventh of nine similar cargo carriers produced for the owners of the Falls Line, Wright, Breakenridge & Co of Glasgow. All nine ships were named after waterfalls in Scotland. First was the FALLS OF CLYDE in 1878, then the FALLS OF BRUAR in 1879 (lost in 1887), the FALLS OF DEE in 1882 (sunk in 1917), the FALLS OF AFTON in 1882, the FALLS OF FOYERS in 1883 (disappeared in 1898), the FALLS OF EARN in 1884 (wrecked in 1892), the FALLS OF HALLADALE in 1886 (wrecked in 1908), the FALLS OF GARRY in 1886 (wrecked in 1911), and the last of the fleet, the FALLS OF ETTRICK (lost in 1906). The FALLS OF CLYDE is still afloat as an exhibit at the Hawaii Maritime Center in Honolulu. Russell & Co delivered the owners full-bottomed, economical ships of 1800 to 2000 tons, practically designed to minimise loss of speed while increasing seaworthiness and carrying capacity. The sturdily constructed FALLS OF HALLADALE had iron masts and wire rigging, allowing her to maintain full sail even in gale conditions, and square “warehouse-type” bilges to accommodate maximum bulk cargo on her long-haul voyages. This class of ship remained commercially competitive into the twentieth century despite the advantages of coal-fired steamships. When the 22 years old FALLS OF HALLADALE finally foundered on Victoria’s Shipwreck Coast in 1908, the Melbourne Court of Marine Inquiry held it was entirely due to Captain D.W. Thomson’s navigational error, rather than any technical failure of the Clyde-built ship. The shipwreck of the FALLS OF HALLADALE is of state significance — Victorian Heritage Register No. S255. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).A brass letter “A”, from the shipwreck FALLS OF HALLADALE, raised along the central axis to form three dimensional effect, in unrestored and fair condition. Of dull grey-green metal, bent and with irregularly worn edges, it has been subjected to amateur cleaning on the front face, with some remaining greenish copper oxidation and surface pitting. The rear face is uncleaned with a layer of sedimentary concretion, orange-red staining from the iron hull, and green copper oxidisation. Three sediment-filled bolt collars on the rear face are part of the original casting.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, great ocean road, brass lettering, falls of halladale, 1908 shipwreck, russell & co., ship's nameplate, letter, letter a

Black and white Photograph Mundy Street, Bendigo, 1860s Building signs include .Professor LEWIS'S Haircutting and Shampooing Saloon, Lewis's shaving .Three Barber's poles outside the weatherboard shop. Clothes Cleaning & Renovating, Cahill and Associates- Obstetrician, Empire Restaurant, Dining Rooms & Boarding House, J.Lindop's Family Hotel, Allen Reeve glass, paperhanging, oil & color warehouse, John D.Bywater-Hay & Corn Dealer, Fletchers on the corner, Fosdyke Drapers.Reverse has a rubber stamp - Kilmore Historical Society .The street is unmade and no people appear to be in view -Batchelderphotograph, streetscape, bendigo

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Book - SEC "Workshop Job Requisition" book - numbered 2856 to 2900, three sheets per requisition - yellow, blue and off white kept in book. Has some 20 areas where information on the requisition could be recorded - on the rear sheet is provision for extending the cost of the job and accounting information. The off white sheet has been by the SEC Ballarat track gang to record their daily work, welding, track cleaning, etc for the period 1-8-1950 to 12-2-1951. Appears to be original writing, not a carbon copy. tram, trams, sec, ballarat, depot, trackwork, rails, welding

Colour slide - Photo of SEC Ballarat Trams No. 32 and 35 at the Sturt St. south side "City" terminus. No. 32 has destination of "Gardens via Drummond Nth" and No. 35 has "Everything's under control in my all electric kitchen" SEC roof advertisement panel. Photo shows passengers boarding tram and stop signage arrangements. Has buildings on the south side of Sturt and Lydiard in the background. Kodak cardboard mount slide, taken by Peter Moses August 1971. Image btm2047ia - cleaned up by Peter Waugh 9/2021.On back of slide in blue ink "N32 Ballarat Sturt St. terminus." and in bottom left hand corner in black ink "P. Moses".tramways, trams, sturt st, lydiard st north, tram stops, tram 35, tram 32

Yields information about the Ballarat's bogie trams, in particular No. 38 that was decorated for the Royal visit in 1954.Digital image from the Wal Jack Ballarat Album of Ballarat 38 decorated for the Queens visit to Ballarat, passing under the royal route in Sturt St and the corner of Doveton St, 8-3-1954, Wal Jack photo. Note directional sign on pole showing an arrow to a RACV Service Centre. See image i2 for rear of photograph. See image i3 for hi res scan of print. See image i4 for hi res scan of negative See image i5 for cleaned up image - PCW - 22-9-2022On rear in ink "SEC Ballarat No. 38 decorated for Queen's visit, passing under street decorations Sturt St from Doveton St 8-3-54". In top right hand corner is Wal Jack stamp with negative number "T170" written in.trams, tramways, royal visit, decorated trams, sturt st, doveton st, tram 38

Has a strong association with a Ballarat Tramway and its horse trams - a handwritten copy of an article in The Courier.Handwritten copy of a H.P. James, article that appeared in The Courier, 19-6-1937, titled "Ballarat's Horse Trams 1887 to 1913" Twenty pages, covering the development of the tramway, track laying, cars builder, formal opening, services, extension, maintenance, drivers and uniforms, collection of fares, tramways colony, supplies of chaff, traffic, conductors, rail and track cleaning, and some details on the tramcars. Contained within Reg Item 5485 - Service Exercise Book, black covers, with label, red binding titled "No. 2 - Ballarat Tramways & S.E.C. Systems". trams, tramways, ballarat, horse trams

Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans die on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This item is significant because it documents actions taken by the Falls Creek Tourist Area Management Committee in their role overseeing the Tourist Area.A circular from the Management Committee summarising the 1970 season and plans for future development. This included further plans for slope improvements and medical services in Fall Creek Reference is also made to the need for positive public relations. Developments planned for the ski tows were outlined. Prices for lifts and tows for the 1971 season were included. Information for a clean up and oversnow transport were mentioned. Extension of the Village and internal improvements also necessitated sealing of roads. The predicted cost for this was $200,000. A full list of Committee Members finished off the circular.falls creek tourist area management committee, falls creek administration, bob hymans

Pamphlet - DL - 3 fold, two colour printed on semi gloss white paper, titled "Why the public transport system must become the public transport service", c1990 describing changes proposed by the Public Transport Corporation to revitalise Melbourne's Public Transport. Notes changes to contracting out cleaning of vehicles, transforming the system to a service, improved security and calling for tenders to provide night buses on nine metro routes. Features a photo of tram 2032 by Parliament. Has "Authorised by the Public Transport Corporation" line above the word "Victoria"trams, tramways, pamphlets, ptc, buses, contracts, melbourne, public transport

Jacket - khaki colour, wool/polyester fabric, Service Dress style. Silver colour plastic buttons with shank and metal split ring. Buttons have raised emblem, with Armoured Corps Badge logo. Collar, shoulder epaulettes, four front pockets, top two with buttons and two metal press studs on flap, lower with flap. Two lapel badges, metal, Armoured Corps Badge logo. Green colour polyester fabric lining with white polyester fabric manufacturers label, inside left.Manufacturers information on labels - black ink print, "ADI/ VIC 1990^ / 8405.66.019.8465/ SIZE 102. 5R/ MATCHING TRS/ SIZE 87.5R/ SHADE NO. D/ ARMY NO/ NAME" "DRY CLEANING ONLY/ RE-PRESS USING IRON AND/ DAMP CLOTH OR MEDIUM/ TO HOT STEAM IRON/ CRESE UPPER HALF OF LAPELS ONLY".uniform, army, service dress, gittins

1. Shirt - light khaki colour cotton/polyester fabric - short sleeves, shoulder epaulettes, two front pockets with button down flap. Plastic buttons. Left sleeve - oval fabric patch, embroidered "Rising Sun Badge" "THE AUSTRALIAN ARMY" - fabric patch, embroidered, crossed rifles. Right sleeve - fabric patch, embroidered, Australian Coat of Arms - Warrant Officer 1st Class. White cotton manufacturers label, back, below collar - illegible. 2. Trousers, Khaki colour wool/polyester fabric. Service Dress style with fob pocket, two side pockets, one back pocket with button down flap. Plastic buttons, metal zipper fly, khaki colour polyester fabric waist and pocket linng. White manufacturers label back pocket lining. Manufacturers information on label: black ink print. 2. "ADA 4500299219/ 2005/ NSN: 8405 66 140 7088/ size w.82il 78/ name/ service no./ 50% wool 50%/ dry clean only (P)/ repress on original/ creases, damp cloth/ or medium to hot/ steam iron/ MADE IN AUSTRALIA"uniform, army, service dress

Jacket, khaki colour, wool/polyester fabric. Service dress style. No belt or buttons. Collar, shoulder epaulettes, four front pockets - top two with buttonhole and two metal press studs on flap, lower with flap. Rank Insignia on top sleeve - crown and stripes for Staff Sergeant. Lining - khaki polyester fabric with manufacturers label inside left. Label white cotton fabric.Manufacturers information on label - black ink print. "E.W. P/LTD/ SOUTH AUSTRALIA/ 1971/ ^/ SIZE 39 SHORT/ CLASS 8405/ 66-019-8482/ ARMY NO./ NAME/.DRY CLEAN ONLY/.REPRESS USING IRON AND DAMP/ CLOTH OR MEDIUM TO HOT/ STEAM IRON/. CREASE UPPER HALF OF/ LAPELS ONLY"uniform, army, service dress

A box containing abrasive paper for sharpening a man's razor blade. Box has directions for use on base of the sliding insert.Front :BULLDOG / REG. / a Bulldog with a British and an Australian Flag / Razor Blade / SHARPENER. Back: BULLDOG / REG./ :Gives / longer life" / SHARPENER/ Sides: A CLEAN SHAVE ENSURES / THAT FEELING OF CONTENT. Insert Top : FOR BEST RESULTS USE / VERY LIGHT PRESSURE. Sides:FINISH OFF BY WIPING EDGES / ON PALM OF HAND. / Made in Australia .razor blades, gillette company, razor sharpeners, bulldog company, toiletries, personal effects, shaving equipment

This item of uniform was own, worn and donated by Major (Retd) Bernard Farley during service in the Army Reserve Infantry at 8/7 Royal Victoria Regiment (RVR) Ballarat VICPolyester trousers with two side pockets, one back pocket, money pocket with belt loops and brass ceremonial belt keepersTag - A.D.I. P/L VIC 1989 ARROW indicating Govt. NSN 8405-66-0185-5522 MACQUARIE 89, Batch C Size. 80RF W.90 L.77 NAME. SERVICE NO. DRY CLEAN ONLY(A) Press on original creases. Use damp cloth. Medium to hot steam iron

This jacket is part of the dress uniform of a Major in the Army Reserve. Major Bernard Farley who owned this jacket wore it to official functions in the Mess dining room. He served in this capacity from 1998-2001.Bernard also served in the RAAF for a number of years.This jacket has significance as it is typical of dress requirements which were worn to official Army functions.Short white jacket with wide front lapels epaulets at the shoulders and a small V shaped downward peak at the back. The sleeves have a stitched over section at the cuff with a point in line with the shoulder. On each epaulet from the collar edge side there is a brass coloured button with the Rising Sun in low relief and on the lower edge of the epaulet a brass coloured crown with red nsert and a circular shaped badge with the word Australia. There is a badge on each lapel two crossed rifles holding a crown in brass colour over the top of a silver VLabel states ,' Fetcher Jones Victoria 1998 NSN 8405-NIC Name....... Service No......... Polyester / Viscose Dry Cleanable ( A) Warm Gentle Machine Wash Rinse well. Warm iron. ZC785 BR1689 425267911.ZC785 107 R 347 044 05037649 cloth br 1689 17. J10129 OW Wwarrnambool, army reserve, dress jacket

This working-model steam engine was hand-made c.1893 by Frank Scott of Mewburn Park, and used to drive a pump. The entire engine and base were repaired, cleaned and restored by participants in a LEAP program hosted by Eastern Victorian Group Training, Bairnsdale, in June 1995. This included repairing a broken piston arm.This small steam engine has two wheels attached to shafts connected to a single piston. It has a horizontal double-acting three inch bore with a four and half inch stroke fitted with Stephensons link reversing gear. It is mounted on a green-coloured wooden box.engines

Enamel cookware became very popular because people wanted a way of coating iron to stop metallic tastes or rust getting into food: something acid-resistant and easy to clean without laborious scouring, something more durable than the tin linings used inside copper. Enamelware dates back to 1760 in Germany.This object is significant as an example of an item in common use in the 19th and early 20th centuries.Oblong shaped enamel dish. The white enamel has been discoloured on the inside and much rust has occurred. The remains of a blue enamel line around rim.Two large rust holes in base, and a small rust hole near rim. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, enamel, kitchenware, baking

Enamel cookware became very popular because people wanted a way of coating iron to stop metallic tastes or rust getting into food: something acid-resistant and easy to clean without laborious scouring, something more durable than the tin linings used inside copper. Enamelware dates back to 1760 in Germany.This object is significant as an example of an item in common use in the 19th and early 20th centuries.Oblong grey enamel dish. White speckles.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, enamel, kitchenware, baking