Used to remove polyps or other growths, using a tightening chain to gradually lacerate the growth, minimizing haemorrhage. Devised by Charles Marie Edouard Chassaignac (1805-1879) who was a surgeon in Paris. The manufacturer of this item was possibly Geo. Tiemann & Co Surgical Instruments USA. Metal ecraseur, Chassaignac's design. The straight shaft can be extended, and has a straight handle at one end and a metal loop at the other. destructive instruments

Items orginally belonged to Professor Bruce Mayes, University of Sydney c1950-65. According to Professor Warren Jones the items had been in a back room of the medical facility and Professor Mayes gave them to Warren Jones, otherwise they may have been thrown out. Warren Jones took them with him to Adelaide where he practiced from 1975.Mucus catheter, similar to Carton's [see 3448, page 355, Allen & Hanburys catalogue]. Stamp of manufacturer, "Holborn Co".

Auvard's specula were used primarily for douching and operating with continuous irrigation. Some examples had fixed weights, others were detachable. This speculum had belonged to Dr Kelvin Churches who was an honorary at the Royal Women's Hospital, Melbourne. Auvard-style speculum, with detachable weight. Inscribed with initials " C.K.C" (for Kelvin Churches). Stamped "RAMSAY", which is the manufacturer."C.K.C" "RAMSAY"obstetrics

These forceps were owned and used by Dr Ronald Rome and Dr Kelvin Churches. Notes suggest that these may be a modified set of Denman-type forceps, as appearance of the outer part of the handles indicate they are an 'adaption' for independent use. (Note from Helen Johnson, 2000).Set of short handled forceps. Both blades of forceps are stamped "Lindsay of London" (for manufacturer) and "R & C" (for Dr Ronald Rome and Dr Kelvin Churches). "R & C" "Lindsay of London"obstetric delivery

This item is used to assist in the regulation of menstrual periods, as well as for medical termination of pregnancy. Syringe kit, "Menstrual Regulation Syringe Kit". Made by Chimco. Consists of box [232.1] containing one plastic syringe [232.2], four canula in unopened sterile packets [232.3, 232.4, 232.5, 232.6] and manufacturer's instruction leaflet [232.7]. Syringe is a 50cc clear plastic syringe with plastic plunger. Syringe has a white plastic handle and tip with screw attachment, and a brown rubber underlay. Syringe and canula packets printed with the word 'Chimco'.abortion, obstetrics

Donated by Dr Lorna Lloyd-Green before 1997 (according to hard copy catalogue record by Helen Johnson.)Surgical auroscope kit with attachments, in black storage box. Manufacturer's label inside box reads 'Gowllands'. Box is lined with purple satin. Kit consists of base handle, three ophthalmoscopic attachments and a gauge.

Most likely donated by the late Dr Frank ForsterPerforator, Samico's, with screw joint. No manufacturers' stamp.perforator, destructive instrument, obstetric delivery

The Schneider ES50 Club was built in 1953 and is the only one of its type. It was designed by Schneider to comply with specifications laid down by the Gliding Federation of Australia for a basic two seat training glider*. It was first flown on 10 May 1953 and delivered to the Renmark Gliding Club. The log book shows that it later passed to other gliding clubs, namely Millicent Gliding Club, Corangamite Soaring Club, Sydney Technical College Gliding Club. Overall, as at September 1967, the glider had logged over 5000 flights and a total airtime of 388 hours. The Museum volunteers have partly refurbished the ES50 to static display standard. [*Plans were also prepared for a single seat version which never eventuated] This glider is one of Edmund Schneider Pty Ltd earliest Australian designs. However, it was a later Schneider design, the ES 52 Kookaburra, which was accepted by many Australian gliding clubs for filling their need for a basic two seat training glider in the 1950s and 1960s. This is a two seat high wing aircraft of mainly wood and fabric construction. The cockpit area of the fuselage is fabric over tubular steel framing. Given serial number 3 by manufacturer and registered as VH-GHPaustralian gliding, glider, sailplane, schneider, es50, renmark gliding club, millicent gliding club, corangamite soaring club, sydney technical college gliding club

This aircraft is one of 9 single seat ES 59 advanced club sailplanes manufactured by Edmund Schneider Pty Ltd in the 1960s. It was first flown in August 1963 and delivered to the Darling Downs Soaring Club at Toowoomba Queensland. At that Club it had 2603 flights and recorded a total airtime of 1475 hours. In addition to many local circuits and soaring and cross country flying, it was used at gliding competitions, including Nationals at Benalla in December 1964, State Championships at Oakey in April 1965, at Warwick in April 1966, and at (Inverell?) in March 1967. On at least 15 occasions flight times in excess of 5 hours duration were achieved. On 5 October 1970, the glider had a new life when it was relocated to Wollongong in New South Wales. It recorded 1927 flights with a total airtime of 1179 hours at the club between October 1970 and June 1988. Competition appearances included the State Championships held at Forbes in January 1972. Places away from Wollongong where the glider was launched include Cootamundra, Wagga, Temora, Marulon, Narromine, Leeton, Nowra, Goulburn, Horsham, Greenthorpe. On 15 June 1988 it was transferred to Ron Geake who transported it to Warrego in Northern Territory (flown once at Alice Springs), and then to Gympie in Queensland where it was flown about 20 times by the end of 1995. It was also flown on a small number of occasions at Forbes in New South Wales in 1996 and 1997. During 1998 and 1999 the glider was sparsely used (9 flights) at locations that have not been recorded. From May 1999 until transfer to the Australian Gliding Museum in May 2011 it apparently was not flown. Aggregate airtime hours for the glider stand at 2702 hours 53 minutes. It has been launched 4569 times. A good example of a Schneider ES59 sailplane from the 1960s. This type is of note because it was the first Australian designed and built sailplane to be used in a world gliding competition (Jack Iggulden in Argentina in 1963). This Schneider ES59 Arrow is a single seat wooden sailplane with one piece wing. The instruments are not present except for altimeter. Fin and rudder are of swept back design. Colour scheme is white with lemon yellow fuselage underbelly. The aircraft came to the museum on an open trailer that had been designed to carry the one piece wing. Plate in cockpit with details of manufacturer states; manufactured by E. Schneider Ltd, Adelaide SA; Type ES 59; Serial Number 62; Date August 1963.australian gliding, glider, sailplane, schneider, es59, arrow, darling downs soaring club, wollongong gliding club, ron geake

The Phoebus is a fibreglass composite sailplane that was designed by H. Nagele, R. Linder and R. Eppler in the early 1960s for competition flying. It is a derivative from the Akaflieg Stuttart Phonix which was the first sailplane to be built of fibreglass. The first Phoebus, a Standard Class design with a 15 metre wingspan, flew in 1964. The Phoebus C is the open class version of the type that was introduced in 1967. It has a 17 metre wing span, retractable wheel and tail brake parachute. Several hundred Phoebus sailplanes (all versions) were made by the manufacturer Bolkow at Ottobrun in Germany before production ended in 1970. The Museum’s Phoebus C, serial number 866, was built in 1969. It was donated to the Museum by Ian Cohn in 2008. Early fibreglass design that was manufactured in numbers. The Phoebus is a modern looking single seat glass fibre sailplane with a ‘T’ tailplane. It is finished in white with light red detailing including thin red stripe on wings and some red striping on fuselage sides from nose to underneath wings.Serial number 866 on plate affixed inside cockpit – registration VH-GSW which has been painted on the sides of the fuselage rear of the wings. A Freistaat Bayern crest has been applied to each side of the vertical stabilizer. australian gliding, glider, sailplane, bolkow, phoebus, cohn, nagele, linder, eppler

The Hall Cherokee II glider is an American design for amateur construction from plans. The designer was Stan Hall (1915-2009), a professional engineer, who gained extensive experience in the United States aviation industry during World War 2 including the programs for military gliders. He continued to work as an engineer for aircraft manufacturers and as a consultant to the industry after the war. He was active in gliding and, in particular, the home built sailplane movement. The Cherokee II was one of about 10 glider designs that he produced: it came out in 1956. It is understood that over 100 Cherokee gliders have been built. In Australia the number is possibly 10 or 11. The Hall Cherokee VH-GVO was built by R.D Meares of Caringbah, New South Wales. The glider was registered as VH-GVO on 11 October 1973 and given serial number “GFA-HB-82” by the Gliding Federation of Australia. The Logbook for VH-GVO appears to be a complete record of the flying history; in aggregate 210 hours 40 minutes in the air from 331 flights. The first test hop occurred on 29 July 1972 at Camden, New South Wales. VH-GVO was last flown on 22 July 1986. Many of the flights recorded are of one or two hours duration. The glider was last inspected and certified as airworthy and in a reasonable condition at the Hunter Valley Gliding Club in July 1986. Since that time, until transferred to the Australian Gliding Museum, the glider was in storage. Structural restoration work has been completed on the fuselage and one wing. However, inspection of the other wing revealed extensive damage to the ribs and spars and consequently a decision was taken to make it a static exhibit. The exhibit is an example of home built construction of a type that has proved popular amongst amateur glider builders.The Hall Cherokee (formerly registered as VH-GVO) is a single seat wooden home built glider. The glider is constructed from wood, plywood, fabric and metal fittings, all commercial grade except for main wing fittings, pulleys, cables and bolts. The fuselage is simple with four main longerons and bulkheads with diagonal bracing. The wing has two identical solid spars which form a geodetic structure, hence the leading edge is non-structural. Registration VH-GVO – serial number GFA-HB-82 australian gliding, glider, sailplane, hall, cherokee, meares, hunter valley gliding club

Australian Natives Association flag yellow initials "ANA" on green background cotton material in three pieces flag in excellent condition manufactured by Carroll & Richardson Pty. Ltd. 194-196 Whitehorse Rd. Blackburn, Vic. a extent of flag b detail of lettering c manufacturer's details, Carroll & Richardson Pty. Ltd.Carroll & Richardson Pty. Ltd. 194-196 Whitehorse Rd. Blackburn, Vic.

Book. Cohn Bros. Collection. Orange cover, 16 parchment-coloured pages. Book is full of articles about different distributers of beverages, including the Cohn Bros. There are also numerous advertisements for the different distributers. Text is in black ink.Printed and published by The Craftman Press Pty Ltd., 510-516 Latrobe Street, Melbourne, for the Proprietors of 'Vidis' Publishing Co.organisation, union, cohn bros. collection, brewers, cordial & aerated water manufacturers, the spirit & wine trade review of australia

Document. Cohn Bros. Collection. Envelope containing letter re. shares of a deceased person. Letter from The London Bank of Australia Limited. The London Bank of Australia Limited Melbourne in an oval shape stamped on the flap of the envelope.organization, business, cohn bros, cohn bros. collection, brewers, brewers, cordial & aerated water manufacturers.

Document. Cohn Bros. Collection. Dark blue/grey cloth covered bank book. The London Chartered Bank of Australia in Account current with Cohn Bros. Victoria. Brewing & Malting Co. Ltd. White card in the book - Carlton & United Breweries Limited. Re - Meeting of the Board. Dated 30 November, 1964 to L. R. Cohn, Esq.organization, business, cohn bros, cohn bros. collection, the london chartered bank of australia, brewers, cordial & aerated water manufacturers

The logos on the breast pocket of these two blazers is CTS for Collingwood Technical School which dates from 1912 to 1969. From 1970 CTS changed its name to Collingwood Technical College.Two Collingwood Technical School blazers. One has an epaulette on each shoulder with two gold stripes on each, and has a manufacturer's label from 'waldron's / SCHOOLWEAR' and is a size 13. The second blazer has a Form Captain badge and an SRC (Student Representative Committee) badge on the lapel, and has a manufacturer's label 'School Master / by kingswear' and is a size 17. Both blazers have CTS logos on the breast pocket, and both have another label which reads The FAMOUS / Doctor / FLANNEL / AUSTRALIAN WOOL BUREAU / GOLD MEDAL WINNER / ALL PURE WOOL / MOTHPROOFED'School logo on pocketcollingwood technical school, school blazer, school uniforms, nmit,

Two CTC School blazers dating from 1970 onwards when Collingwood Technical School changed to Collingwood Technical College. Both have epaulettes on each shoulder with two gold stripes. The first also has two Band badges, one on each lapel, indicating it belonged to a School Band member. It is in very good condition. The second blazer has no badges, is made by 'waldron's SCHOOLWEAR' and has 'The Doctor FLANNEL ...' label and is a size 10.Black Pure Wool school blazer, with two gold stripes on epaulettes on each shoulder, and CTC logo on the pocket. A Band badge on each lapel. Dates from 1970 when Collingwood Technical School changed to Collingwood Technical College. Also a second CTC Black School blazer which was in the collection, also with the same epaulettes made by Waldron's Schoolwear, size 10.1st Blazer: CTC logo on pocket. And Manufacturer's labels inside. First reads 'PURE WOOL / Philip Joseph / TAILORED QUALITY'. Second label reads The FAMOUS / Doctor / FLANNEL / AUSTRALIAN WOOL BUREAU / GOLD MEDAL WINNER / ALL PURE WOOL / MOTHPROOFED' Second Blazer has label 'waldron's / SCHOOLWEAR' and 'The Doctor ...' label as the one above. This is a size 10.collingwood technical college, school blazer, uniforms, nmit.

McColl Rankin & Stanistreet, North Virginia Gold Mining Co NL. a/ John Shaw Ltd, Wire Rope Manufacturers, Sheffield England. Certificate that 2 lengths of 2-1/2 cir. 6/7 construction Best Black Plough Steel Wire Rope, Quality, Acid Material. 100/110 ton each 1250 feet long supplied. Breaking strain of not less then 24.8 actual tons. Stamped: For Hardware of Australia Propriety Limited. Signed: ?? (attached by pin to b) b/ Hardware Co. Of Australia, Iron & Steel Merchants, South Melbourne. Descriptions per (a) 109.7.3 Signed: Hunt. Dated 15/11/1939. c/ Test Certificate For Wire Ropes Issued to J R Reid & Sons. Rope dispatched per S.S.''Mildura'' to Melbourne on 3.12.1946.Tested in the presence of A Boots, Abbott Supply Coy. Pty. Ltd. For the Australian Wire Rope Works Pty Ltd. Signed: J Humphy. Dated: 6/12/1946. Includes picture.organization, business, gold mine, mccoll rankin & stanistreet, north virginia gold mining co nl. a/ john shaw ltd, wire rope manufacturers, sheffield england 6/7 construction best black plough steel wire rope quality acid material 100/110 ton each 1250 feet long supplied reid & son

The concertina was owned by Simon McDonald. He gave the concertina to Myrtle Porter in exchanged for town water. Simon McDonald lived in Melbourne Rd., Creswick.Simon McDonald (1906 - 1968) was a noted self taught Australian folk musician whose home was in Creswick. Consider in the industry as the most important.20 Button Anglo Concertina & Case. Hexagon shaped Concertina. Both sides have fretwork and 10 bone buttons making it a 20 plus single button Anglo concertina. The leather straps have at sometime been replaced with white plastic strap. It has 5 bellows in black and white pattern leather. The hexagon wood case is lined, although the lining is showing wear.One side: small disc with Lachenal & Co., Patent Concertina Manufacturers, London. Opposite side: Initials on red card J.W.Gsimon mcdonald, anglo concertina, creswick

Most likely donated by the late Dr Frank ForsterPerforator, Denman's, with screw joint. No manufacturer's stamp.perforator, destructive instrument, obstetric delivery

Most likely donated by the late Dr Frank ForsterPerforator, Denmans's, with lift off joint. Manufacturers' stamp "S. Mawson & Thompson London".perforator, destructive instrument, obstetric delivery

Most likely donated by the late Dr Frank ForsterPerforator, Denman's, small, with screw joint. Manufacturer unknown.perforator, destructive instrument, obstetric delivery

Most likely donated by the late Dr Frank ForsterPerforator, Simpson's, with external screw joint and hinge. Manufacturer unknown.Stamped on inner arms "13' and, the other arm, "13+" .perforator, destructive instrument, obstetric delivery