used to provide mouth to mouth resuscitationOf significance to the AHNL as an example of first aid equipmentPlastic device with a tube at each end of a mouthguardJohnson & Johnson Resusitube Airwayfirst aid, medical equipment

Murray Comrie Collection. This photograph shows the blacksmiths premises on the north end of Commercial Road, Tarnagulla. Information collated by Murray Comrie: This building was demolished in the 1970s. The first use of the site was as the George Hotel licensed to an A.B. Clay in 1858, then Waller and Robinson. Charles Waller operated his Excelsior Line of coaches from the George Hotel stables. John Ousley took over the stables for use as a blacksmith's shop. He sold out to Stafford & Sons in 1908. Staffords found the existing premises at the George Hotel too small and built this building. Frank McNamee later took over the premises and operated it for many years. This photograph is a reasonable copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting a large run-down weatherboard building at the north end of Commercial Road, Tarnagulla. Written in a sign on right side of building: 'Blacksmiths'. Same as image THA-2019.0053tarnagulla, commerce, industry, blacksmithing, smithing, coachbuilding, businesses, stafford & sons, norwood, mcnamee, buildings, hotels, horses, stables, commercial road, main street

This Boyle-Davis design set of gags, or tongue depressors, was used during E.N.T. oral medical and surgical procedures to keep the tongue out of the way and to allow the oral administration of anaestetic gas. The set was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine, administration, household equipment and clothing from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Surgical instrument, Boyle-Davis gag, tongue depressor, (3 units) part of the W.R. Angus Collection. Stainless steel tongue depressor, both ends curve inwards, under one end is an enclosed channel that opens up at the end, made for adding a light source. Made by Mayer of London.Inpressed "MAYER & CO. LONDON"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, medical treatment, boyle-davis gag, tongue depressor, e.n.t. surgery, oral surgery

Belt belonged to Frederick Burchell Smith VX128239. 2/166 AUST WKSP Platoon. Enlisted 4 Jan 1944. Discharged 2 Aug 1946.Khaki webbing with pockets in back for size adjustment. Belt has brass ends with adjusted hooks - brass sliding brackets each end and solid brass attachment brackets each end. Belt has two strap brackets attached in middle of belt.uniform, webbing, belt

Dough was put in forcer/case/cylinder and wooden pin pressed down to force dough out as a star-shaped biscuit. In use in a working-class home in the mid 20th century.Representative of kitchen utensils in common use in working class kitchens in 20th century prior to the common availability of packaged biscuits. Tin/metal outer cylinder/case/open one end, lid other end, with star pattern (can be removed for washing). Inner wooden pin or forcer, knob on end to be pushed into metal cylinder to force dough out through patterned disc.domestic, kitchen, food, technology, biscuit, forcer, baking, woman s, work, appliances

A metal object with hook piece protruding from the bottom of the Candle holder. At the bottom there is a spike at one end of the holder and a circular end at the other . Near the flat circular end there is a cylinder shape to hold a candle. The object sits on the spike and the hook protrudes abovecandle spider, mining

A tool such as this one would have been used by many householders in the past and those using guns in their occupations or hobbies – shooters, farmers, policemen etc. This item is retained as an example of a tool used in the past to re-load shot guns.This is a metal tool, with part of it painted green and containing a brass section. The top part of the tool has a round hollow section open at one end. The tool has a handle at one end (made of composite material) and a wing nut screw in the lower middle section. This enables the tool to be attached to a bench for stability. At the other end is a tapering piece of metal with a sharp end. This mechanism is attached with a screw and is able to be moved so that a section of it touches the open end of the hollow part on the top. vintage tools

This is a three part wooden tool with a screw in barrel cleaning brush. 1. End piece turned handle, slightly larger diameter than shaft, it has a brass female screw socket at one end. 2. Wooden rod, at one end is a female brass screw socket and a male screw adaptor. 3. Wooden rod. At the end is a male screw adapter. At the other end is a turned and reduced brass female socket. 4. The cleaning brush with brass male screw adapter.weapon cleaning tool, tool

The basic balance scale has been around for thousands of years and its accuracy has improved dramatically over the last several centuries, the principle behind this tool remains unchanged. Its parts include a fulcrum, a beam that balances on it, a pan at the end of the beam to hold the materials to be weighed, and a flat platform at the other for the counter-balancing weights. Balance scales that require equal weights on each side of the fulcrum have been used by everyone from apothecaries and assayers to jewellers and postal workers. Known as an unequal arm balance scale, this variety builds the counterweight into the device. Counter scales used in dry-goods stores and domestic kitchens often featured Japanned or (blackened) cast iron with bronze trims. Made by companies such as Howe and Fairbanks, the footed tin pans of these scales were often oblong, some encircled at one end so bulk items could be easily poured into a bag. Seamless pans were typically stamped from brass and given style names like Snuff (the smallest) and Birmingham (the largest). Some counter scales were designed for measuring spices, others for weighing slices of cake. In the 18th century, spring scales began to appear and would use the resistance of spring to calculate weights, which are read automatically on the scale’s face. The ease of use of spring scales over balance scales. One of the most common types of spring scales was the kitchen scale also known as a family or dial scale. Designed for horizontal surfaces, these vintage kitchen scales used the weight of goods in a pan at the top of the scale to force the spring down rather than the balance system. Such scales were common in early 20th century households and were sold by many companies. Many had flat weighing surfaces but some were topped by shallow pans. Companies such as Salters, Chatillon, and Fairbanks were the most popular brands used. These scales are significant as they identify one of the basic preparation items for the weighing of foodstuff in the family kitchen to prepare everyday meals. This item is significant as it gives a snapshot into domestic life within the average home in Australia around the turn of the twentieth century and is, therefore, an item with social relevance. Black cast iron, medium weighing scales, with a fulcrum which the beam that balances on, there is as scoop at one end for the material to be weighted and a flat circular disc at the other end that holds the weights. Around the cast iron base is an embossed leaf pattern. All the weights have their weight embossed within the casting.There are 5 weights, marked 2 oz, 4 oz,8 oz,1 lb,2 lb, This scale does not have any visual markings on the arms to identify a maker or true balance. It is therefore assumed that these scales were made for domestic use only.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, spring scale, scale

Community information brochure issued in 1973 by Ringwood Council outlining local services, sporting, and cultural facilities. Includes names of Ward Councillors, and two City of Ringwood Free Tipping Vouchers valid until the end of 1974."Frontpiece: A quiet corner of the Fred Dwerryhouse Swimming Centre, Jubilee Park." "The staff at the Civic Centre are at your service. Ring 8704311 for guidance on - Town Planning applications, Road and footpath construction, Building matters, Garbage clearance, Connection to sewer by end of 1973, Immunisation times and places, Home help, Rate payments and valuations, Booking of meeting rooms, Clearance of fire hazards, Stray dogs and all nuisance complaints."rinx

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of its major industries. Many of the italian families were involved in tobacco farming. These scales were bought from Arthur Barnard in 1962.Historical: Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of its major industries. Many of the Italian families were involved in tobacco farming. Provenance: This tobacco farmer came from Italy and was sponsored to visit a tobacco farmer in Myrtleford to learn how to grow tobacco so that he could transfer those skills to his own farm in the Kiewa Valley.Iron circular plate attached to iron frame with rings attached to rings at both ends. 1 end facing frontwards and second end facing sideways. At 1 end is a back to front iron S formed as a hook. Attached to the middle of the plate is a very thin and sharp pointer. The plate is attached to a rectangular iron solid rectangle. Used to weigh leaf when bailing.0 - 250 numbers (by 10s) and measurements faintly inscribed around the edge of the plate.tobacco. kiewa valley. mongans bridge. arthur barnard. scales. rossaro.

This veterinary item was found in a walk-through dairy at Wombat Track, Orbost. It has been identified by vet, Peter Honey (9.1.2015) as possibly used for flushing abscessed or mastitis teats. It could have been improvised for another use by the farmer and was probably originally for medical use.These items are representative of items used in Orbost on dairy farms in the first half of 20th century.A glass syringe-like tube with a glass plunger inside. There is a small hole at one end and a movable plunger at the other end which has a cork collar.veterinary-equipment dairy farming

This marking gauge has a round head. It is a hand-powered tool and is used to measure and mark a scribed line onto the surface of the wood for the purpose of cutting or aligning. It would have been used by a tradesperson such as a cabinet maker, wood worker or carpenter. The hand tool shows signs of much use. It appears to be appreciated as a tool due to the initials carved into the side of the block. The marking gauge is an example of a hand powered woodworking tool used over the past few centuriesMarking gauge: wooden staff with half-round block secured by a wedge. there is a metal marker on one end. Inscription "WS" crudely engraved in end of block.Carved "W.S."flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, hand tool, woodwork, marking gauge, w.s., measuring tool

Horse harness is composed of a number of items some leather and other pieces are metal such as these particular ones. The loose attachments allow for the movement of the horse without its muscles being impinged or hampered. There are a number of different types of harness which relate to the type of work or recreation being engaged at the time and for different breeds of horse. Many of the leather straps were also adaptable allowing for different sized horses to use the same set of harness. These items are quite heavy are were possibly used by work horses of an earlier era. They were possibly made locally at one of the many blacksmiths in the town.Parts of a common item from earlier times and as such has historic significance. It opens the discussion of the use of horses in everyday life and work.Three similar oval shaped items with a wider flatter section at one end and a thicker heavier section on the other end. They are made of iron and heavily rusted.history of warrnambool, horse harness

Toothing plane, blade is missing, J. Heath stamped on the end, adjustable depth gauge on one end, 165mm long, 65mm high, 70mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Flagstaff Hill’s collection has items that are thought to be relics from the Ancient Wreck, (also called the Gold Ship, Mahogany Ship or Ancient Vessel). Three relics were located in 1890, due to the ‘interest of a public works inspector, James Gilroy, who dug in the ship’s remains’. One of the relics was a heavily oxidated ‘quantity of ironwork’. The other two, now part of Flagstaff Hill’s collection, are - an iron latch probably from a galley oven door or fireplace - a bronze bolt (spike or pin) Both of these relics are listed on the same page in the records of the Old Warrnambool Museum, found by K.A.G. (or H.A.G.) on the site of the Ancient wreck 1890. Interestingly, another item in these records is ‘Notes on Ancient wreck, near Gorman’s Lane’. Gorman’s Lane is just inland from the sand dunes of the Coastal Reserve at Tower Hill. The current location of these Notes is unknown. Another relic is thought to be the amphora, discovered in 1934 on a local property. The Museum opened in 1886 and continued until 1963, when it was closed by the Warrnambool City Council and the whole collection was put into storage. The council then transferred items to various places including Flagstaff Hill and the current Warrnambool Art Gallery. Flagstaff Hill’s early Accession Records book lists the items as being received from the Old Warrnambool Museum collection; the Latch is record 152 and the Pin is record 153. An article, ‘Birthplace of our History’ by Don Dean, is on file in the Warrnambool and District Historical Society. It was published in the Australian POST, March 17, 1955. This article describes the finding of the items going back to 1890, along with other information about sightings of what has come to be known as the Mahogany Ship. The mystery of the Mahogany Ship began in 1836 when two shipwrecked sealers discovered the remains of an “ancient vessel” in the sand dunes about four miles west of Warrnambool. Since the last recorded sightings in the 1880’s the true origin of the Mahogany Ship has remained one of Australia’s most famous historical mysteries. One of the more recent theories is that the vessel was one of the Portuguese ships exploring the Australian coast in 1522. For over one hundred years searchers have attempted to locate and identify the wreck. The search continues for the tangible evidence which will once and for all establish the Mahogany Ship’s place in Australia’s History. The bolt has local historic significance as it was found in the sand dunes of Warrnambool in 1890. The bolt is also significant for being part of the original 1886 Warrnambool Museum's collection. The bolt is significant for its possible link to one of Victoria’s and Australia’s maritime mysteries, the Mahogany Ship (also known as the Ancient Wreck). It is one of very few known relics that could give evidence of the existence and history of the vessel. It is listed on the Victorian Heritage Register S438 as it is one of Victoria’s oldest recorded shipwrecks. The identity of the vessel has the potential to change Australia’s history.Bolt, also referred to as spike or pin. Bronze bolt, round body with head on one end that has straight sides, tapers to a point at the other end.warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, mahogany ship, relic, pin, spike, old warrnambool museum, nail, ancient vessel, ancient wreck, portuguese ship, gold ship, gorman’s lane, coastal reserve, tower hill

8425.1 - Long metal bar with an octagonal cross-section. One end is tapered to a point. one end is flattened into a chisel and bent into an s-curve with the shaft

This pessary was manufactured by Allen and Hanburys in three sizes - large, medium, and small. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Thomas style supportive antiflexion pessary. Pessary is made of black vulcanite and is inscribed with number "60". Pessary is thickened at distal end and tapered at proximal end.intrauterine device, pessary

Prue Forster believes this to be the bottle given to her by 'Auntie' Maud Pepper, for Frank Forster's collection. Prue met her when she was working for the Aboriginal Health Service (1980-1993). 'Auntie' Maud Pepper was living in Preston at the time but had come from the Western District. The bottle was her own and she told Prue how fine material was used over the mouthpiece instead of a rubber teat. 'Auntie' Maud Pepper was a founder of ACES (the Aboriginal Elders Residence & Convalescent Home.) Additional sensitive notes on file.Glass boat-shaped feeding bottle with one end flattened and a spout at the other. There is a larger opening with a lip on the top surface. There is a small chip on the flattened end.infant feeding, infant care

This type of pessary was used in the treatment of retroflexion of the uterus. Thomas’ Retroflexion Pessary is narrower in proportion to its length, while the greater bow is enlarged to a bulb-like form. It enjoyed great popularity and as such was manufactured in a great variety of sizes. Comprised of hard rubber because of its lightness and the high polish that may be given it. The shape can be adjusted by covering the device in petrolatum and heating it with a spirit lamp or immersing it in boiling water. Manufactured in three sizes, and could be combined with a cup and stem external support. See Allen & Hanburys Gynaecological instruments catalogue, page 707.Vulcanite pessary. Pessary is loosely horseshoe shaped, tapering to a point at the proximal end. The curve of the pessary at the distal end thickens and is rounded. Majority of the pessary is concave.intrauterine device, pessary

This pessary was manufactured by Allen and Hanburys in three sizes - large, medium, and small. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Thomas style supportive antiflexion pessary. Pessary is made of black vulcanite and is inscribed with number "65". Pessary is thickened at distal end and tapered at proximal end.intrauterine device, pessary

Donated by Clarrie Talbot to Whitehorse Historical Society during his talk to the Eastern Region Historical Societies meeting on Railways on 31st July 2004 at the Local History Room of the Whitehorse Historical Society. From the last batch of tickets of the Victorian Railways.One grey cardboard ticket, Nunawading to Healesville. Single printed on front with no 00057 stamped on one end and 15 DE 77 stamped on other endtransport, railway, documents, tickets

Middle section - bellows made of paper. Leather handle and stoppers on one end and mother of pearl press buttons, which operate keys on the other end.Mezon manufactured for Accordion Lyons Melbourne Bourke Street Lyons Sole agent Bourke St.musical instruments, wind

Could have been used for mining?Tomahawk with metal head & wooden handle. Head has hammer one end, cutting edge other end, nick in blade possibly for pulling nailstools, hand tools

Used by horse rider to control their horse to urge them to go faster. Used by racing jockeys and competitive riders. Ca1900As manufactured and sold by Holden and Frost Ca 1900Tapered shaft covered in a cotton meshed cover. At one end a 50mm leather loop the other end a steel cap 180mm from leather loopequine, crop

Canvas strap worn by soldiers as part of equipment to attatch ammunition pouchesManufactured in 1946 by GMH for military purposesCanvas strap with centre section 280 x 85mm stitched to 450 x 25 mm lengths each end. Brass fittings each endGMH 1945 D Dmilitary, war, canvas