This plan is of great significance to the local history of Warrnambool, in particular the Breakwater and its impact on Warrnambool's maritime and trade history. The plan shows the existing jetties at the Port of Warrnambool, plus the partially erected Breakwater and proposed works to the Breakwater by both the Borough of Warrnambool Surveyor and Sir John Coode. The plan was signed 28th February 1879 by Sir John Coode. The legend at the bottom left describes the existing works and the proposed works. The Warrnambool Breakwater Sir John Coode was a British harbour engineer. He was brought to Melbourne by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne. The Victorian Government commissioned him to present a plan to complete the Warrnambool Breakwater. His original plan was too expensive so he prepared a revised plan for a shorter structure. The work was completed in 1890. The construction proved to be too short to protect adequately from the weather and didn't allow enough depth for larger vessels to come into port. The decreasing trade was further affected by siltation in the bay due to the breakwater, and the completion of the railway line. The situation of the harbour became a real problem that, by 1910, required continuous dredging. In 1914 the Breakwater was extended but proved to be a failure because the work began to subside and by 1920 about two thirds of the harbour was silted up. Alterations made in the 1920's increased the silting problem and by the 1940's the harbour was no longer used. More alterations were made in the 1950's and 1960's. The Warrnambool Breakwater is registered as a place of significance on the Victorian Heritage Database. This plan of the proposed works for the existing Warrnambool Breakwater is of great significance to the local history of Warrnambool, in particular the Breakwater and its impact on Warrnambool's maritime and trade history. The Warrnambool Breakwater is registered as a place of significance on the Victorian Heritage Database (VHR H2024). It is historically significant to Victoria as one of the most important maritime engineering projects in Victoria in the late 19th century. The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.Plan of Warrnambool Harbour, Port of Warrnambool, dated 28 Feb 1879. Plan shows existing Breakwater and work proposed by both Warrnambool Borough Surveyor and Sir John Coode. Plan has gold coloured quarter-dowel rods top and bottom and a metal ring at the top. Stamped with title. Signed by Sir John Coode.Stamped "VICTORIAN HARBOURS / WARRNAMBOOL / PLAN / to accompany / SIR JOHN GOODE'S REPORT / DATED 28 FEB 1879" Signature "John Coode"flagstaff hill, warrnambool, maritime museum, shipwreck coast, great ocean road, sir john coode, borough of warrnambool surveyor, plan of warrnambool, victorian harbours, warrnambool harbour, warrnambool breakwater, port of warrnambool, vhd vhr h2024, flagstaff hill maritime museum & village, maritime village, map, chart, plan, lady bay, breakwater, jetty, pier, vhr h2024, proposed works, 1879

Coloured photographRingwood Bowls Club Inc. 1999. Life Members Back Row- L to R: Vera Purchase, Arnold Bartling, Allan Clayton, Rod Taylor, Ian Embling, Beryl O'Grady. Front Row- L to R: Avis Holliday, Rita Stanfield. Insert: Ian McRae.

Wooden with cast iron gearing components and round butter worker is hand operated. The rotary butter worker has a round tray carved from wood. Protruding upwards from the centre of the tray is a column with arched top. The column has a small square outlet on one side near the base that provides for excess buttermilk to be drained away. Around the circumference of the butter worker protruding outwards from the sides is a thick cast-iron track. The wooden paddle has a unique curved shape that has a wave appearance. It has a slight arch which forces the butter to remain in the tray and to direct any excess buttermilk to the centre. Through the wooden paddle is an iron rod connected to a crank handle. By turning the handle the rod rotates a gear system that leads the table to rotate on the metal track.Side: CHERRY'S PATENT NO. 1 GISBORNE VICTORIA 4407 Etched into upper arm of wooden frame.cherry's patent, bubb family, evans family

These reels where used by a local family in catching Murray Cod and trout in the Kiewa Rivers and Murray River. This old Pilot side cast fishing reel was made in the late 20's & early 30's They were used in the mid 1950s. Although the original inhabitants (Aborigine tribe) would have used spears for fishing the use of reels and rods by non indigenous fisher persons are also very effective especially if raised in the valley.These items are significant because they demonstrate the harvesting of fish from valley rivers and streams is one of continuation from the first human habitation of this region. The ability to harvest the natural food source of the valley's rivers and streams has come from earlier survival requirement to one of recreational pleasure. Brass & Wooden Frame Side Casting Fishing Reel. This reel has 2 winding bakelite handles.Pilot, Tag states W. Davies Please return.recreation, river, kiewa, fishing, industry, reel, side, casting, davies

Photos of a Legacy event or outing to trout farm in the Alexandra Yea area in 1978 - a mix of men and women with fishing rods. Names are unknown other than President David Carter in the brown shirt. Similar photos are in a photo album at 00013 labelled as 'Alexandra/Yea 1978'. The Comradeship committee gathered photos of events and compiled them in a Comradeship photo album for Legatees to look through. These photos may have fallen out of the album.A record of an enjoyable outing of Legatees. The Comradeship photo album was put together by the Comradeship committee and records events that Legatees did and places they lived or visited. Some appear to be trips to visit other Legatees living overseas and social occasions held in different places. It shows the bond that Legatees have with each other and their desire to socialise together.Colour photos x 6 of Legatees at a trout farm.comradeship, legatee event

A desk flag produced by the Association for the Blind, possibly for fundraising. A metal rod sits in a black rubber base, with a cream felt triangular pennant atop. On the pennant are the words 'Association for the Blind' in caramel coloured writing near the narrowing part of the triangle. Four small rectangles make a frame around the logo of black half circle with black flame outline inside joined with white circle, amidst black background above and below the arc.Cream felt flag with words 'Association for the Blind' in caramel, standing on black baseAssociation for the Blindassociation for the blind, fundraising

Copy of black and white photograph mounted on board. Accompanied by a caption.Caption reads: Boys 1962 Lacrosse team. Back row: Ken Seal, John Twomey, Neil Tregear, Norm Simons, Chris Angouras. Barry Thompson & Howard Parker ( in suits) Front row: Murray Cameron, Ray Green, Rod Cordell, Murray Garnsworthy & Lee Cornerwilliamstown high school, 1962, lacrosse

This clock was made by Charles Frederick Falck who was a watchmaker and jeweller in Beechworth from 1863-1908. Falck was born in Körlin, Prussia on May 22nd in 1833 and died at the age of 75 in 1908. Ovens and Murray Advertiser, Beechworth: edition June 13, 1908 OBITUARY: Falck was brought up to the business of watch-making, in which he developed exceptional mechanical ingenuity. Attracted by the favourable prospects held out by the Australian discoveries of gold he, like many other young adventurous spirits, left his native land to seek his fortune in the great southern Eldorado, arriving in Adelaide in 1854, and shortly after came to Melbourne where he worked as a journeyman, and subsequently started in business on his own account. Feeling inclined to test his fortune on the goldfields, he went to Blackwood but, meeting with little success, he returned to Melbourne where he was married. In 1862, he moved to Beechworth, where he commenced business as watchmaker and gold-buyer. He then embarked in vine-growing on the Sydney road, but eventually resumed his business avocations. His skill in practical horology was evinced in a clock of his own design and manufacture, surmounted by a golden eagle, which was exhibited at the first Melbourne Exhibition in 1856, and which afterwards formed a pre-eminent attraction in the window of his business premises in Ford Street. For many years, he filled the position of timekeeper to the Beechworth Racing Club, with complete satisfaction also at various sports meetings. He leaves a family of six sons and one daughter (Mrs. Jas. Broadfoot) all arrived at maturity. The funeral, which was well attended by a number of residents, took place at the Beechworth Cemetery on Sunday, the burial service being performed by the Ven. Archdeacon Potter. The cortege was capably supervised by Mr. D. Wilson, undertaker. The clock was returned to Beechworth in 2020 through the generous support of the Copland Foundation. Given that Mr. C. F. Falck traded as a watchmaker and jeweller in Beechworth for 45 years and traded with the 1855 clock mounted in his front window, there is a direct link between the clocks and the social, cultural and economic life of nineteenth century Beechworth at time when the town was developing and expanding in response to gold mining. This clock represent the significant skill and expertise of Charles Falck as an horologist. Medium-sized pendulum clock featuring a carved gilt wood eagle with wings outstretch (épandre - expanded with wing-tips directed upwards) and perched above a pendulum rod that holds a silver dial clock face within a reeded sunburst surround. The clock has an eight-day fuse movement with dead beat escapement wound from the clock face. C. F. F. FALCK / EXHIBITION 1856 / MELBOURNEburke museum, copland foundation, beechworth, leonard joel, auction, purchase, clock, pendulum, eagle, eagle clock, charles frederick falck, c. f. falck, falck, horology, pendulum clock, melbourne

Collection of memorabilia relating to W J BOWMAN mounted in narrow black wooden frame with gold inner edge & glass. Letter from DON BOWMAN re ROD PINDER; flat piece of metal etched with W J BOWMAN's army number, name & regiment, temporary Duplicate Pay Book with W J BOWMAN's details written in ink.Pay Book: "2308 BOWMAN W J 1st Field SQDN Engineers"military history - memorabilia, service records, passchendaele barracks trust

Pictures of four past principals Eric Allison 1964 - 1970, John Henry 1972 - 1976, Bob Harrowfield ( 1941 - 60 ) Ron Cordingley ( 1970 - 72 ), report book page 1965, and school yard kids Brian White, Geoff Gibbs, Graham Moyle, Rod Woodman, Geoff Chellew, Jim Pappas, Rob Johnson, Ian Smith.bendigo, education, golden square primary school

J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the produce business to the Kelly brothers in 2006.This item was an important everyday feature in many stores when items were wrapped in brown paper before the introduction of plastic bags.The paper dispenser has a wooden top and base, with a cast iron frame and lever. There is a removable metal rod which holds the paper roll in place. It was used for dispensing brown wrapping paper. The Blade" lever is not sharp, but was used to stabilise the paper roll so the paper can be easily torn off at the required length. An empty paper roll is included.mann wodonga, wodonga businesses

Short Trip ticket, full fare, printed on white paper, punched for Nov. 4, available for journey up to 2 sections on trams, buses or light rail vehicles only. Has The Met, second logo on top of the ticket. Ticket No. H395656, G735447, H222948. 2nd and 3rd tickets added 11/7/17, from donation of Rod Atkins.trams, tramways, the met, buses, tickets, short trip tickets

Originally this teaching model belonged to Prince Henry's hospit�l library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Model of female uterus with cross-section revealing a foetus, also, fallopian tubes and ovaries with cut away section revealing vagina and cervix. Painted plastic on metal rod with round wooden stand. Labelled on base "AV618.2 / 01 Fetus". Stamped on base, "PRINCE HENRY'S HOSPITAL/ NURSES LIBRARY." Label underneath base"Adam Rouilly/ London England".teaching model, anatomy, female uterus

This tuyere (word from French origin) was used by professional blacksmiths and or cattlemen before and during the Kiewa Hydro Electricity Scheme was being constructed. The need to use a furnace or forge in the shaping of metal rods, horse shoes and pipes is both a rural necessity and a construction, on site requirement. The "inventiveness" of cattlemen and construction workers to produce metal objects not available "off the shelf" is one of the inherent traits not only of rural self sufficiency but in the "pioneer" days of rural isolation one of survival.This tuyere is of great significance to the Kiewa Valley and its regions because it highlights one of the greatest strengths of the rural (especially isolated) life and its folk living there, and that is the great human factor of adaptability and survival techniques in sometimes harsh and demanding environmental circumstances. The inventiveness and the attitude, "she'll be right mate", demonstrates life on the land where specialised blacksmith activities can be found in non "professionals" because of the fact that "someone" has to do the job. This is one of the differences between country "rural" life and that found in cities and larger towns.This iron cone shaped tuyere has a small hole (diamenter 25mm) starting within an ever enlarging cone (amplification of the air pressure going through) delivering varying hot or extremely hot air into a furnace or hearth which intensifies the heat to allow the "shaping" of metal objects. The larger "flared" cone extension allows for the directed air to be spread and not concentrated.blacksmith tool, tue, bellows, fashioning metal, forge manufacturing process

This set of nine photographs was taken at an Army Survey Regiment Australian Rules Football social game at Golden Square Football Oval, Victoria in 1995. It is possible the game was between Product Construction Squadron and Data Acquisition Squadron, as it is apparent there are a mixture of Officers, WOs SGTs, CPLs and SPRs in each of the two teams. It is unlikely it was against another unit as it seems the CO LTCOL Duncan Burns and his counterpart are involved in the coin toss, and neither was wearing football boots. This set of nine photographs was taken at an Army Survey Regiment Australian Rules Football social game at Golden Square Football Oval, Victoria in 1995. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, colour. 1995. All players unidentified. .2) - Photo, colour. 1995. L to R: Doug Willis, others unidentified. .3) - Photo, colour. 1995. L to R: unidentified (x2), Dough Willis, Rod Skidmore (yellow guernsey) .4) - Photo, colour. 1995. L to R: Bob Thrower, Rod Skidmore (yellow guernsey) others unidentified. .5) - Photo, colour. 1995. Greg Byers (Umpire) .6) - Photo, colour. 1995. L to R: Jim Ash (background), Rhys De Laine. .7) - Photo, colour. 1995. Jim Ash. .8) - Photo, colour. 1995. L to R: Rod Skidmore, Anthony Chamberlayne, unidentified (x3), Greg Byers (umpire), unidentified (x2), LTCOL Duncan Burns, unidentified, Rohan Hill, Bob Thrower, Doug Willis, Jim Ash, Mark Bird. .9) - Photo, colour. 1995. L to R: Jim Ash, Bob Thrower, Derek Percival, unidentified..1P to .9P – no annotationsroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr

Hardcover book made in 1945 to keep original copies of “The Football Record”. This book contains all Football Records relating to Carlton games for the season of 1945. Carlton won their 7th VFL/AFL premiership in 1945, defeating South Melbourne by 28 points at the MCG. Carlton 2.4 7.5 12.9 15.13 103 Sat 29-Sep-1945 2:50 PM Att: 62,986 Venue: Princes Park South Melbourne 0.5 6.9 8.10 10.15 75 Carlton won by 28 pts Coach: Percy Bentley Captain: Bob Chitty Vice Captains: Bob Green and Rod McLean Leading Goal-kicker: Lance Collins - 49 goals Best & Fairest: Ron Savage Second Best & Fairest: Ken Baxter Most Consistent: Arthur Sanger Most Improved: Vin Brown Most Serviceable: Bert Deacon Best First Year: Clinton Wines Most Promising: Ken Hands Best Team Man: Rod McLean & Mick Price Inspiring Play: Lance Collins Consistent Play: Jim Baird Improved Play: Doug Williams Special Efforts: Jack Bennett Blue hardcover book

This clock was made by Charles Frederick Falck who was a watchmaker and jeweller in Beechworth from 1863-1908. Falck was born in Körlin, Prussia on May 22nd in 1833 and died at the age of 75 in 1908. Ovens and Murray Advertiser, Beechworth: edition June 13, 1908 OBITUARY: Falck was brought up to the business of watch-making, in which he developed exceptional mechanical ingenuity. Attracted by the favourable prospects held out by the Australian discoveries of gold he, like many other young adventurous spirits, left his native land to seek his fortune in the great southern Eldorado, arriving in Adelaide in 1854, and shortly after came to Melbourne where he worked as a journeyman, and subsequently started in business on his own account. Feeling inclined to test his fortune on the goldfields, he went to Blackwood but, meeting with little success, he returned to Melbourne where he was married. In 1862, he moved to Beechworth, where he commenced business as watchmaker and gold-buyer. He then embarked in vine-growing on the Sydney road, but eventually resumed his business avocations. His skill in practical horology was evinced in a clock of his own design and manufacture, surmounted by a golden eagle, which was exhibited at the first Melbourne Exhibition in 1856, and which afterwards formed a pre-eminent attraction in the window of his business premises in Ford Street. For many years, he filled the position of timekeeper to the Beechworth Racing Club, with complete satisfaction also at various sports meetings. He leaves a family of six sons and one daughter (Mrs. Jas. Broadfoot) all arrived at maturity. The funeral, which was well attended by a number of residents, took place at the Beechworth Cemetery on Sunday, the burial service being performed by the Ven. Archdeacon Potter. The cortege was capably supervised by Mr. D. Wilson, undertaker. The clock was returned to Beechworth in 2020 through the generous support of the Copland Foundation and the Friends of the Burke. Given that Mr. C. F. Falck traded as a watchmaker and jeweller in Beechworth for 45 years and traded with the 1855 clock mounted in his front window, there is a direct link between the clocks and the social, cultural and economic life of nineteenth century Beechworth at time when the town was developing and expanding in response to gold mining. This clock represent the significant skill and expertise of Charles Falck as an horologist. Large swinging clock featuring a carved gilt wood eagle with its wings outstretched (abaisé - expanded with wing-tips lowered) and perched above a pendulum rod that holds a silvered dial clock face within a reeded sunburst surround. (Similar to #2019.056.01) The clock has an eight-day fuse movement with dead beat escapement wound from the clock face. C. F. FALCK / WATCHMAKERburke museum, copland foundation, beechworth, leonard joel, auction, purchase, clock, pendulum, eagle, eagle clock, charles frederick falck, c. f. falck, falck, horology, pendulum clock, melbourne

Teaching aid to measure weight.Plastic yellow base and T shaped stand. Stand can be lifted off base. Base is 'rectangular' with each side curving inwards. Apex of T has steel rod enabling the cross arm to move. Each end of arm has a hole with steel ring attached. Also in ring are the end of 3 chains hanging down and attached to white enamel plates.Embossed on upright 'Invicta / Simple Scale' mt beauty primary school, teaching aid, mathematics, scales

This medical instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. In a white cardboard box 2 metal instruments. One is a pair of scissors with 'teeth' at the handle end and a bow at the instrument end when the ends meet The scissors are bent before the pivot. The other instrument is a long rod with a screw at one end that turns the other end around. This other end has a funnel that comes to a point. A holding instrument used during the operation.On box, in pencil "Mrytleford Clinic' / Pile Drivermedical instrument. hospital equipment. tawonga. mt beauty. haemorrhoid, myrtleford

This drum comes from the group which is now called " Warrnambool & District Pipes & Drums". As the Warrnambool Pipe Band it was formed in 1906 and today its aim is to foster a taste for bagpipe music. A separate Ladies' Band was set up in 1950 and combined with the Mens' Band in 1974. The Warrnambool & District Pipes & Drums is held in high regard nationally.This drum is a memento of an important musical group in WarrnamboolThis is a large, circular drum for a pipe band. The outside centre is skin surrounded by wooden rings, one of which is painted black. Between the rings is a cream and black mottled pattern on a curved piece made of composite material. There are eight silver tuning rods equally spaced along the side. One of these has two pieces of red tape attached. There is printing on both sides of the drum.Warrnambool Ladies Pipe Band Warrnambool Pipe Band warrnambool ladies' pipe band, warrnambool & district pipes & drums

This resistor was part of the Hydro generator control metering system which displays what electricity is produced at the underground generators. The control centre can be hundreds of meters above the generators and this resistor reduces the large current to a small voltage entering a calibrated control monitor. This resistor is highly significant to the Kiewa Valley because it represents a major construction and ongoing operational industry dealing with the supply of hydro electricity to Victoria. Although it is relatively small in size it is part of the controlling mechanism for the supply of a non polluting energy source for home and industrial use.This mainly metal and wire resistor has been built of copper and brass and designed to carry a current of 2000 Amperes. Wires are wound around a non conductive cement block which has grooves on the top and bottom ledges to hold the wires snuggle into place. At the rear there are three connection rods which have long 5mm thick screws (to fasten cable ends)On one side it is scribed "0.2 OHMS" and underneath this "10 AMPS"kiewa hydro electricity scheme, victorian state electricity commission, transformers

Originally this teaching model belonged to Prince Henry's hospit�l library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Model of a foetus, approximately seven weeks. Painted plastic on metal rod with round wooden stand. Labelled on base "AV618.2 / 01 Fetus/ FOETUS". Stamped on base, "PRINCE HENRY'S HOSPITAL/ NURSES LIBRARY." Label on base"Adam Rouilly/ London England". The model has anaaatomical numberings in black ink. There must have been an acompaning information booklet [missing].teaching model anatomy, female foetus

The letters of the completed banner were made by different churches within in the presbytery and spelled a sentence, presumably "BUILD YOUR CHURCH LORD!" Orbost was one of the churches that had the finished banner on display. 24 small banners with tabs at the top of each for hanging on a rod. 19 have large blue letters appliqued on them. Twenty two of the banners are roughly square and two are smaller and oblong. Three have no letters and are used as spacers in the four word sentence that the letters make. The banners are decorated with rural and coastal images. BN068.14 "C" with appliqued boat, sky and sun "C"uniting church adult fellowship

The letters of the completed banner were made by different churches within in the presbytery and spelled a sentence, presumably "BUILD YOUR CHURCH LORD!" Orbost was one of the churches that had the finished banner on display. One of 24 small banners with tabs at the top of each for hanging on a rod. 19 have large blue letters appliqued on them. Twenty two of the banners are roughly square and two are smaller and oblong. Three have no letters and are used as spacers in the four word sentence that the letters make. The banners are decorated with rural and coastal images. BN068.18 "R" with cows, hills, sheep and a sack "R"uniting church adult fellowship

The letters of the completed banner were made by different churches within in the presbytery and spelled a sentence, presumably "BUILD YOUR CHURCH LORD!" Orbost was one of the churches that had the finished banner on display. One of 24 small banners with tabs at the top of each for hanging on a rod. 19 have large blue letters appliqued on them. Twenty two of the banners are roughly square and two are smaller and oblong. Three have no letters and are used as spacers in the four word sentence that the letters make. The banners are decorated with rural and coastal images. BN068.20 "!" with fabric brown cow in grass " ! "uniting church adult fellowship

The letters of the completed banner were made by different churches within in the presbytery and spelled a sentence, presumably "BUILD YOUR CHURCH LORD!" Orbost was one of the churches that had the finished banner on display. One of 24 small banners with tabs at the top of each for hanging on a rod. 19 have large blue letters appliqued on them. Twenty two of the banners are roughly square and two are smaller and oblong. Three have no letters and are used as spacers in the four word sentence that the letters make. The banners are decorated with rural and coastal images. BN068.21 spacer with appliqued house, bushes and barn. uniting church adult fellowship

This item was donated to the museum by Joseph Dallimore. Dallimore was brought up at Lake Gillear, and as a young man he left Australia to travel overseas both to help his parent's business in the wool trade and for pleasure. He wrote many letters to his parents keeping them updated with the prices he received from selling wool and on his travels. Later in life Dallimore enlisted in the Australian Army and went on to have a distinguished career during the Boer War. He would have collected this piano whilst on service in South Africa.South African thumb piano from the Zulu culture. It is a wooden panel board with 15 iron finger keys in it. They are stuck onto the wood at one end with some sort of glue and also held in place by an iron rod passing over the top of them. At the bottom of the board is a metal panel and attached to that is a small circular cymbal. There is a string tying the metal panel to the wooden board.There are no original markings on this although the original museum label is still stuck to the bottom which says, ' Native piano ( Mashona)' on it in script.south africa, joseph dallimore. war, boer war, zulu, finger piano, music

Yields information about the BTPS 21st Anniversary celebrations which involved running a "all day" service and a cavalcade of trams.Bromide of a black and white photograph of the cavalcade of trams as part of the 21st celebrations of the closure of the Ballarat tramways on 26/9/1992. Photo appeared in the Sept. 1992 issue of Fares Please! Caption was "Tram No. 38 completes the cavalcade, not quite clear of Gardens Loop." Photo Carolyn Dean. Rod Atkins on right hand side of photograph. See September 1992 Fares Please!trams, tramways, btps, 21st anniversary, wendouree parade, gardens loop, cavalcade, tram 38

A Chemold Rod Laver Autographl tennis racquet, with leather grip featuring patterned perforations. Chemold logo features across base of head. Model name and black and gold Chemold trademark feature on shaft. Chemold trademark with large 'C' features on black butt cap. Materials: Wood, Nylon, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis