Showing 15851 items
matching metals.
-
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Chadborn modification Schimmelbusch ether inhaler used by Dr Mitchell Henry O'Sullivan
Dr. Curt Schimmelbusch (1860-1895), a German physician, designed his original mask around 1889 while an assistant surgeon. Surgical assistants were often assigned the task of delivering the anesthetic. During anesthesia it was not uncommon for ether and chloroform to get onto the patient’s skin, causing irritation. Chloroform can even cause burn-like reactions. Schimmelbusch designed the rim of his mask so that both sides curve away from the patient’s face to form a kind of trough. He intended the trough-like rim to collect excess anesthetic that would otherwise have trickled onto the patient’s face. To anesthetize a patient, gauze was stretched over the metal bars and fastened in place by the hinge. The mask was placed over the patient’s nose and mouth, and the anesthetic was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. This type of mask is sometimes still used today for ether anesthesia in developing countries when other means are not available. (Wood Library Museum of Anesthesiology) This particular object is a modified version of Schimmelbusch's design, known as Chadborn's modification.Oval shaped chromium plated mask with two metal strips linked front to back and side to side to create a dome. An oval shaped mobile wire frame is attached to the lower part of the mask by a hinge at the back, approximately two inches from the lip of the metal handle. A "U" shaped bit of metal is attached to the front of the mask which acts as a clip to fasten the wire frame to the lower section of the mask.anaesthesia -
Lara RSL Sub Branch
plaques vietnam - 1. australian force Vietnam, 2. national memorial to vietnam forces 3 Vietnam vetrans parade sydney 1987, 3 Plaques vietnam - 1. australian force Vietnam, 2. national memorial to vietnam forces 3 Vietnam vetrans parade sydney 1987
Vietnam Veterans parade 1987. Australia gives the Vietnam Veterans:soldiers, navy and airman finally receive the "welcome home" they deserved. Vietnam Veterans parade 1987. Australia gives the Vietnam Veterans:soldiers, navy and airman finally receive the "welcome home" they deserved. Stained pine board with three Vietnam plaques mounted on - plaques - 1. Australian force Vietnam, 2.National memorial to Vietnam forces 3 Vietnam vetrans parade sydney 1987. 1. Australian Vietnam Forces National Memorial and 2. National Memorial to Vietnam forces The Australian Vietnam Forces National Memorial is dedicated to all those Australians who served, suffered and died in that conflict. It was built largely through contributions from the Australian people, raised by the Australian Vietnam Forces National Memorial Committee. 3. Vietnam Vetrans Parade Sydney 1987 On October 3, 1987, around 22, 000 Vietnam veterans marched in a ‘Welcome Home’ parade through the streets of Sydney It was estimated that the parade was watched by a crowd of up to 100,000, including Prime Minister Hawke, and that it stood up to ten deep along the parade route in some places. he marchers carried more than 500 Australian flags, each flag representing a serviceman who had lost their life during the Vietnam War. These simple acts represented the reconciliatory nature of the event – the flags, standing for the nation-state, were accepted as a proper symbol for the fallen by the veterans and symbolised their reconciliation with the body politic that they felt had rejected their rightful place in the Anzac narrative after the end of the Vietnam conflict. Plaques:- 1. Australian Vietnam Forces National Memorial, Wooden Shield with metal shield with black outer ringed by service corps insignia, inner with a white band of the shield shape. the interior of the metal shield is light blue circle, with a white vertical sword, the top of the sword is a banner of red and orange strips. Below the metal shield is a Australian Army rising sun badge. Followed by a banner inscribed with " Australian Force Vietnam" 2. National Memorial to the Australian Vietnam Forces :- Small wooden shield, with a metal rectangle inscribed - vietnam veterans, welcome home parade 1987, plaques -
Parks Victoria - Wilsons Promontory Lightstation
Lamp, Aldis
The lamps were pioneered by the British Navy in the late nineteenth century and introduced by the Royal Australian Navy after 1918, and continue to be used to the present day. Manufactured in 1960, the Wilsons Promontory lamp was provided to the lighthouse by the Department of Shipping for signalling ships but was also used for communicating with Cliffy Island, 18 nautical miles away. This type of lamp was renowned for its brilliant light, and lightkeepers from the two lightstations ‘used to practice their signalling with each other, as its effective use was reliant on precise positioning of the scope which is located on top of the lamp’. The inside of the case is imprinted with ‘RAN (Royal Australian Navy), and details on the lamp include a serial number, the date of 1960 and the initials of the Department of Transport, which at that time incorporated the Commonwealth Lighthouse Service. Another Aldis lamp and case with a date of 1960 is held at Cape Nelson and third lamp and case is at Point Hicks; (date unconfirmed but possibly 1943). A fourth lamp and case formerly at Cape Schanck disappeared from the collection sometime between 1995 and 2003.Aldis lamp and case (WPLS 0003.2; likely provenance) The lamps are not rare in museum collections however the Wilsons Promontory example has a confirmed provenance to the lightation and has first level contributory significance as a fine example of the Aldis lamps that were distributed to lightstations throughout Victoria and Australia.1. Handheld black signaling lantern with trigger mechanism. Glass front with inner reflective disc. Black electrical cord is attached with a two pronged plug at the end. 2. Black painted wooden box for transporting lantern. brass catch, leather handle. Grey electrical cord inside plus transformer. Hinged lid. The Aldis lamp is portable, hand held visual signalling lamp with trigger mechanism and inner reflective disk used for optical communication via Morse code. The concave mirror is tilted to focus the light into pulse signals. Larger versions of the lamp are fixed on ships or pedestals and have shutters in front of the device that are opened and closed to transmit signals. Wilsons Promontory’s black metal Aldis lamp and attached electrical cord has a black painted wooden carrying case with metal clasp and leather hand grip.1. On trigger;"AP16413" Around V shaped protrusion attached to lamp "AP197873 / AEI .LTD 59" Beneath screw on face;"AD16415" Inside lamp, under glass;"ADMIRALTY PATTERN 16409 / 5 INCH HAND SIGNALING LANTERN SERIAL No. 212 Year 1960 / AEI PTY LTD SYDNEY" •2. Box. On brass plate below handle."ADMIRALTY PATTERN 16409 / BOX FOR TRANSPORTING LANTERN / PATTERN 16409" Inside box on side of metal insert attached to inside of box;"EXTRA LOW VOLTAGE TRANSFORMER / MADE BY / M.Brodribb, Melbourne/ cat & APP / No v/QR / 1811A / 50 / 60 va / CONT. 55 c / RATIO 240, 12 V TAPS " Top of metal box on sticker;"C of A / D.O.T 143076 / 12 V 5A" On Bakelite plug on metal box;"EXTRA LOW VOLTAGE" -
The Beechworth Burke Museum
Animal specimen - Snowy Owl, Trustees of the Australian Museum, 1860- 1880
The Snowy owl is a large and powerful bird. It is one of the largest species of owl, and in North America, it is on average the heaviest owl species. The adult male is virtually pure white, but females and young birds have some dark spots; the young are heavily barred, and dark spotting may even predominate. Thick plumage, heavily feathered taloned feet, and coloration render the Snowy owl well-adapted for life north of the Arctic Circle. This Snowy Owl example is slightly discoloured and in real life the Snowy Owl displays much more brilliant white feathers. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This Snowy Owl adult male is virtually pure white with brown spot markings and a pale brownish wash. It has thick plumage and heavily feathered taloned feet. This specimen stands upon a wooden platform and has an identification tag tied around its leg.Swing tag: [torn] snowy owl / See catalogue, page 54 / Metal tag: 4054 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, owl, snowy owl, arctic circle -
Melbourne Athenaeum Archives
Barometer, Given the plaque affixed to the instrument states Royal Arcade as the premises’ address it is assumed that the barometer was manufactured no sooner than1869
Stick mercury barometer, named after Admiral Robert Fitzroy of the Royal Navy (1805 - 1865) for his detailed instructions on interpreting the weather that are included with the instrument. Fitzroy was the captain of the Beagle, a weather forecaster to Charles Darwin and the second Governor of New Zealand. He developed many different types of barometers and was the first person to introduce the science of weather forecasting to the British Isles. A local manufacturer of scientific instruments, Thomas Gaunt, produced the barometer and it was adapted for the southern hemisphere by Robert Ellery, the State Astronomer based at the Melbourne Observatory. Described as "Gaunt's Fitzroy Barometers" in the original sale catalogue, it was priced from 25/- to ₤9.9s. [See Miller, M., Gaunt’s Time, 2014]. Thomas Gaunt's business was originally located at 14 Bourke Street East from 1858. In 1869-1870 he moved to new premises in the Royal Arcade, Collins Street. Gaunt's business became an institution in Victorian Melbourne and Gaunt its leading clock maker. PROVENANCE According to official minutes the barometer was purchased by the Melbourne Athenaeum in 1874. In particular, at the March meeting of the General Committee the House Subcommittee was instructed to "obtain a Fitzroy or other reliable barometer" to be "fixed in the Reading Room". The 1874 Annual Report records the purchase at ₤3.10.0. The barometer is historically significant as an example of the work of Melbourne’s leading scientific instrument maker, Thomas Gaunt. The barometer has social significance as an example of the type of accoutrements provided by the committee of the Melbourne Athenaeum for the comfort of its members. Further social significance lies in the fact that Robert Ellery, the Government Astronomer, who designed the local version of the barometer, has a direct connection with the Athenaeum being a subscription member and committee member of the Athenaeum during the 1870s. There are also records of a T Gaunt as a subscription member of the Athenaeum during the 1870s and 1880s which may be Thomas Gaunt, however, this is yet to be verified. Stick mercury barometer known as the Admiral Fitzroy Barometer. It comprises an oblong wooden case with glass front panel, ornate pediment, barometer with bulb cistern (empty of fluid),printed instructions for interpreting information given by the gauge affixed to left and right face of instrument. Includes a thermometer. The barometer appears to be intact except for the turning knobs which are missing and the mercury in the tube which is not present. Whether the instrument could be restored to working order is unknown. Front right panel, metal plaque: "Thos Gaunt, Barometer Maker, Royal Arcade, Melbourne"melbourne athenaeum, barometer, thermometer, admiral fitzroy, thomas gaunt of melbourne, robert ellery -
Anglesea and District Historical Society
Forestry Branding Hammer, Unknown
Old logging stamp hammer, double-sided, iron head on wooden handle. F.C. on one end. Arrow on the other end. Probably used to mark trees on public land.F.C. on one end of head. Arrow on other end of head. Metal head painted grey.forestry commission, branding hammer -
Warrnambool and District Historical Society Inc.
Functional object - Window weights, Circa 1890
Dutton and Wiggs operated a brass and iron foundry known as the Warrnambool Brass and iron Foundry situated in Timor St. Mr Dutton was a mechanical engineer and Mr C Wiggs was an experienced foundry worker. They were innovative in their work and also manufactured a large number of everyday items such as verandah posts, brackets and milk aerators.The significance lies in the fact that the items were manufactured in Warrnambool by a well- established local business. Two solid cast iron rods of cylindrical shape with one flattened edge with name imprinted. Hollowed out section on one end. S. Wiggs W,bool. One has the number 7 and the other 5 cast into the metal. warrnambool, wiggs, dutton & wiggs, window weights -
Flagstaff Hill Maritime Museum and Village
Domestic object - Food Safe, Willow Ware Pty Ltd, 1920-1950
Willow started business in 1887 as a metal working company based in Melbourne Australia, making tinned biscuit and tea canisters. The outbreak of the First World War saw their manufacturing change to making armaments and essential packaging for the war effort. In the early 1920’s, the Willow brand was established. Making tin plated canisters and baking pans with the well-known Willow pattern, imprinted on them. Some other items in production at this time include billies, boilers, basins and Coolgardie safes. In the late 1950’s, the company ventured into plastics production. Stepping away from its very successful tin plating industry of more than 50 years. In 1965, the company name changed to Willow Ware Pty Ltd, to be more closely linked to its Willow brand. Willow Ware is still in business today. A food safe known as a “Coolgardie” meat storage made by an emerging Australian company no longer in bushiness. This item gives a snapshot into early Australian manufacturing specifically aimed at the Australian market. Safe metal kitchen safe with two shelves, a hinged door and latch and a small swivel wire handle at the top. cream colour . "Made in Australia" "Willow" warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, willow ware, domestic item, coolgardie meat safe, meat safe, food safe, food preservation -
Flagstaff Hill Maritime Museum and Village
Tool - Hem marker stand, 1900s
This hem marker stand is a measuring tool for gauging the height of a hem, such as on a dress or curtain. The adjustable arm slides along the ruler and its snug fit ensures that it stays at the right height. The end of the arm has a metal pin inserted into it to hold a piece of chalk, which would be used to mark the fabric. The hem marker would be used by professional dressmakers, seamstresses, and tailors as well as by crafts people at home. The hem marker was made in Birmingham.The hem marking stand is an example of tools used during the 1900s in the garments and furnishings trades as well as for domestic purposes. Since that time the tool has evolved into a more efficient design that makes home sewing easier.Ham marking stand with a wooden ruler, stand and a sliding adjustable arm on a brass sleeve. The arm has a metal pin on the end. Measurements are marked on both sides, inches on one side and centimetres on the other. Inscriptions are stamped into the wood. Made in Birmingham."- - - - / - - - - - / -BIRMINGHAM" On end of arm "2*4'flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, hem marker, dressmaker, dressmaking, alterations, tailor, dressmaker's tool, sewing marker, sewing gauge, seamstress, domestic use, dress fitting, curtain hemming, birmingham, freestanding, chalk hem marker, stand, home craft -
Kew Historical Society Inc
Uniform - Scout Leader Uniform, Kew District, Scout Association of Victoria, c.1993
The khaki shirt has District and Scout Membership badges and length-of-service badges, the Australian Scout Badge and a Red Cross First Aid badge. The leather belt has a collection of Jamboree souvenir metal badges attached. A ‘lemon squeezer’ felt hat completes the outfit. The hat badge and plume was coloured to indicate to which Section the wearer belonged, purple indicating the Commissioner Section. To keep the brim flat, the hat was sometimes kept in a timber frame when not being worn. This uniform was worn by Desley Reid as Assistant District Commissioner of Kew District between 1993 and 1995.The scouting movement has a rich history on Kew. The Kew Historical Society has attempted to build this section of the collection in recognition of its importance. The uniform was donated by an office bearer of the Society who, as a women, held a key role in the district.Short-sleeved, collarless fabric shirt of khaki color, with embroidered badges. Also fabric neck scarf, with braid and vinyl holdfast (woggle) and a leather belt with metal clasp with Scout impression. Various Scout badgesunforms, scouts -- kew, scouts - kew district, badges of office -
Flagstaff Hill Maritime Museum and Village
Tool - Fuller, Grooving iron, 19th and early-20th centuries
This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch -
Flagstaff Hill Maritime Museum and Village
Tool - Fuller, Grooving iron, 19th and early-20th centuries
This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This handmade tool was made for the particular purpose of joining sheets of metal together. The metal formed in this way could be used for water tanks, boilers and other similar items. It is an example of the equipment made and used in the trades of a metalsmith and blacksmith in the 19th and early 20th centuries.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch -
Vision Australia
Machine - Object, Perkins School for the Blind, Perkins Brailler, 1950-1980
Wanting to improve upon the limitations of existing Braillers, the Perkins School for the Blind resolved to develop a new machine that would produce uniformity in embossing, was lightweight and was easy to use. By the 1940's, David Abrahams (a teacher at the school) had developed his prototype, but manufacturing restrictions created by World War 2 halted proceedings. In the waiting period, students at the school used the prototype and Abrahams perfected his device. During the post-war era, Howe Press agreed to take on production of the Perkins Brailler and it became of the most popular and commonly used Braillers around the world since it's commercial release in 1951. Also included is a booklet of photocopied instructions with honeycomb binding.Metal Braille writer with nine grey keys, carriage return key and paper rollers on either side, with grey vinyl cover, and photocopied instruction booklet.'Perkins Brailler' embossed on front of machine and in silver on cover. Sticker on top of machine reads "This equipment remains the property of Braille and Talking Book Library 31-51 Commercial Road, South Yarra 3141 Phone: (03) 267 6022." Metal plate attached to front below keys "Designed by David Abraham, Manufactured and Distributed by Howe Memorial Press, Perkins School for the Blind, Watertown, Mass. U.S.A." Stamped on base of front: G0345braille equipment, perkins school for the blind -
Glenelg Shire Council Cultural Collection
Functional object - Pool Cue and Case, n.d
Pool cue, wooden, belonged to H.L. Vivian. ' H.V.' scratched into wood near grip end '16 1/2 oz' etched into cue, about 1/3 length from grip end. Carry case brown leather, metal ring narrow end, flap to fold over opening. Light tan leather label with 'H.L. VIVIAN''16 1/2 oz' etched into cue, about 1/3 length from grip end. Carry case brown leather, metal ring narrow end, flap to fold over opening. Light tan leather label with 'H.L. VIVIAN'billiards, pool, cue, local history, portland, betty vivian collection -
Clunes Museum
functional object - BILL SPIKE
METAL SPIKE ON A METAL BASE Nil office item, spike -
Ringwood RSL Sub-Branch
Souvenir - Grenade, attached to metal base
Metal Grenade on metal base -
Warrnambool RSL Sub Branch
Service Jacket; Army Nurses Uniform, Early 1940's
This uniform was worn by Sister Winifred Ride during World War 2.. Nurses played a key role in the conflict through their care and compassion to the servicemen who were wounded and sick.The nurses uniform is symbolic of the sacrifice and service of the many women who served their country in WW2. Grey fitted, lined jacket with long sleeves, collar and lapels. Three front metal buttons buttons and two smaller buttons on each sleeve. Dark green epaulette with four metal buttons on each shoulder (Right side is faded). Two hip pockets with one button fastener. One internal pocket with small grey button. Unit patches on each sleeve and four inverted service chevrons on right sleeve at wrist. Two ribbon bars containing 5 Campaign Ribbons on left side of front, attached with standard 'brooch' fitting . Belt (same material as jacket) passes through two loops on back of jacket and is fastened by two buttons, hidden when belt is fastened. Metal buttons stamped with map of Australia with crown above and the words Australian Military Forces around. Makers label inside back below collar: " /tailors and habit makers, J .RAVENSDALE & SON Nicholas Bldg Swanston Street Melbourne". Name of owner handwritten "Sister Ride:" -
Parks Victoria - Gabo Island Lightstation
Flagpole
Found on a wood heap near the tractor shed. Only the top portion remains. The former fixture is the tapered top section of the wooden flagpole that formerly stood at the front of the head keepers quarters. There is a hole with attached metal pulley near the top which allowed for hoisting the flags to signal passing ships. Signal flags were hoisted on the flagpole and were used to communicate with passing shipping. Messages were then relayed by the overland telegraph line to Eden. Remains of black paint provide evidence of the blackout measures implemented during World War 11. The pole is currently fixed to a stand to allow for its display.The pole remnant has second level significance for its historic value and provenance.Top sction of a flagpole. At the top it is tapered and fashioned into a square section. Near the top of the pole is a hole with a metal pulley inside. There is black and white paint flaking off leaving bare wood. -
Warrnambool and District Historical Society Inc.
Trophy Barrel, 1930's
This barrel was probably used to hold ice but minus its insert could have been a biscuit barrel. In the days before refrigerators were common household items the barrel would have been a useful portable ice carrier for use in a hotel bar or at a table. The plaque on the side of the barrel suggests that the barrel could have been awarded as a trophy or prize in a sporting competition. This item has no known local provenance but is retained as an example of a household item from times past.This is a wooden barrel with silver-coloured metal bands on the top and bottom of the barrel, a metal handle and a detachable metal lid. A metal plaque is attached to the side of the barrel with metal pins. The inside of the barrel has a ceramic insert with a metal rim. The metal bands are much oxidized. ‘E.PN.Svintage household items, biscuit barrel, warrnambool -
Falls Creek Historical Society
Memorabilia - VIntage Sledge and suitcase
These items were donated by George Shirling, a long-term stakeholder in Falls Creek, first building and owning Koki Lodge and later owning and operating the Red Onion Lodge. The metal sledge was at Red Onion when George bought the lodge from Lauriston GIrls' School in 1974. Lauriston had owned the Red Onion for about three years. The sledge was most likely made or acquired by the Australian Alpine Club who had built there in 1963 and owned the Lodge until 1970. The suitcases belonged to George Shirling's parents who arrived in Australia from Austria in 1938. George then used this suitcase when he travelled to Falls Creek in the early 1960s.These items are significant because they were donated to the Falls Creek Historical Society by a long-standing and highly regarded member of the Falls Creek community.A sledge made from a metal frame and base plate with a rope lead attached. A leather suitcase with a silk lining and leather handles. A variety of travel stickers have been attached.george shirling, koki lodge, red onion -
Deaf Children Australia
Conversation tube bell
Most conversation tubes were made in the late 19th and early 20th Century, but there are still some manufactured today. They were manufactured for a variety of reasons, not just for the hearing impaired. Metal bell for a conversation tube. Metal connection, black bell (possibly metal) deaf children australia, conversation tube, bell -
South West Healthcare
ECG Trimmer, 3M Littmann ECG Trimmer, 20th Century
Used by healthcare staff in the hospital setting to prepare ECG's for Medical review. Electrical Cardiac Graph data was recorded from the patient in long paper strips. The ECG trimmer was used to trim these strips into individual lead recordings and reconfigured on one page. This item has been replaced by new models of ECG recording devices which automatically configure lead information.This item is representative of early Cardiology patient assessment.Boxed: Hinged metal case with central metal reinforcement plate; metal pencil."Littmann ECG Trimmer" / "MODEL 205AA SERIAL No. 536185". Box; "FEB '84 17".ecg, medical equipment, cardiology -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Jewellery, tie stud and chain and a small, velvet covered box, c1900
A tie pin is a neckwear-controlling device, originally worn by wealthy English gentlemen to secure the folds of their cravats. They were first popularized at the beginning of the 19th century. Cravats were made of silk, satin, lace and lightly starched cambric, lawn and muslin, and stickpins were necessary accoutrements to keep these expensive fabrics in place and safe. Stickpins commonly used pearls and other precious gemstones set in gold or other precious metals and were designed specifically for their owners. By the 1860s, wearing cravats had been embraced by the English upper middle classes with a consequently lower quality of materials and designs used in both the neckwear and in the stickpins used to keep it in place. By the 1870s Americans had embraced stickpins and designs were mass-producedThe family of Lorna Risstrom were early settlers in Moorabbin ShireA tie-stud and chain in a small, blue velvet covered, silk lined, hinged jewellery box with . The tie-stud has a red stone set in gold metalmoorabbin, bentleigh, cheltenham, early settlers, pioneers, market gardneners, jewellery, risstrom lorna, tie-pins, tie- studs, cravats, silk, lace, -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, J R Alexander & Sons Ltd, c. 1936
This bottle labelled No Rub liquid wax proclaims the wonders of No-Rub, no-slip, and shines as it dries. The bottle still contains some of the liquid floor wax, made by J R Alexander & Sons Limited. The company was registered as a limited company from 1924 to 1975. However, the firm's advertisement and referrals from satisfied Melbourne customers, printed in The Argus, Melbourne, on Mach 19th, 1954, states that it made the first shoe polish, Supreme, in Australia as long ago as 1900. The firm made a range of household cleaning products such as floor wax, shoe polish and fabric starch. The J R Alexander & Sons Ltd. No-Rub liquid wax was advertised in various states of Australia from around 1936 until the 1950s. Later advertisements show sketches of the wax containers, which were round bottles or metal cans. The bottle in our collection is likely to be made around the 1960s.Bottle; brown glass with metal cap and yellow, orange and black label on the front. Flat rectangular-shaped bottle with a short neck and rounded shoulders The bottle has a black metal screw top lid and contents inside. There are inscriptions on the label. The bottle contains No Rub Floor Wax. Made by J R Alexander and Sons, of Adelaide, Melbourne, Sydney and BrisbanePrinted on the label: "SHAKE WELL" "No-Rub" TRADE MARK REGD." "THE NON-SLIP / Liquid / FLOOR WAX / Saves Labour / Saves Time" "Shines as it dries" "NETT CONTENTS 15 FLUID OZS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, glass technology, bottle, glass bottle, brown glass, cleaning product, floor cleaner, floor polish, domestic cleaner, no-rub, floor wax, non-slip, flat bottle, bottle contents, liquid wax, j r alexander & sons, household cleaning, cleaning products, zippy starch, zippy window cleaner, liquid floor wax, no rub floor wax, supreme shoe polish, rectangular bottle -
Warrnambool and District Historical Society Inc.
Metal Clamp, Late 19th century
This item is one of several tools believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a tool with a rectangular-shaped metal bar with an upright metal piece at the end of this bar. Attached to the metal bar by two metal bolts is a U-shaped metal lever. This lever is movable. vintage tools, henry phillips, history of warrnambool -
Kiewa Valley Historical Society
Bell - Kangaroo Hoppet 1995
This bell was used by the public to ring encouragement to participants competing in the Kangaroo Hoppet. The Kangaroo Hoppet has its origins in the Birkebeiner Nordic Ski Club's 21 km Australian Birkebeiner, first held in 1979 at Falls Creek. In 1991 the first Kangaroo Hoppet of 42 km was conducted and became part of the Worldloppet being the first and, at the time, the only one in the southern hemisphere. It continues (2024) to be held on the fourth Saturday in August. It also includes the Australian Birkebeiner 21 km and the Joey Hoppet 7 km.Used by local family to cheer on relatives competing in the 1995 Kangaroo Hoppet at Falls Creek.Metal cylinder fastened with 3 metal rivets with metal ring handle on metal top. Attached is a metal ringer and a white ribbon with blue writing and boomerang and skis logo. Handmade.Ribbon: "AASF Falls Creek 1995"kangaroo hoppet; ski race; cross country skiing; bogong high plains, snow sports, metal bell -
Warrnambool and District Historical Society Inc.
Tools, Name Stamp, Late 19th century/early 20th century
This is the stamp used by Ernest Phillips to mark his tools and his products. It was used both on wood and metal surfaces. Ernest Brighton Phillips (1875-1924) was born in Warrnambool and was apprenticed as a cabinet maker at the Warrnambool Box Works. By the 1890s he had established a furniture shop at the corner of Liebig and Koroit Streets and by the beginning of the 20th century he had the largest furniture warehouse and factory in Victoria outside of Melbourne. His products were sold all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and today this site is occupied by the flats complex for senior citizens called ‘Heatherlie’. This stamp is of interest because it belonged to Ernest Phillips, a prominent Warrnambool businessman (late 1800s to the early 1900s.) It is also of interest as an example of an early name stamp. This is a small piece of metal with a rounded flange top and a wider flattened end. The end is serrated and cut to hold the letters, ‘E. Phillips’. Some white paint has been splashed on the end section.‘E.Phillips’ (letters reversed for stamping purposes)ernest phillips, history of warrnambool -
Flagstaff Hill Maritime Museum and Village
Functional object - Prosthetic Arm, Early 20th century
This prosthetic arm has been made to assist a person who has part of his or her arm missing. The hook fixed to the end is an attempt to give the wearer extra assistance in replacing some of the functions of a hand. Prosthetic hook arms like this one have existed for centuries. Archaeological evidence shows that prosthetic limbs have been designed and used since almost 6000 years ago. Hooks for seafarers were made from whatever materials were readily available onboard the ship., such as metal, wood and leather. Often the prosthetic arms were simple lock-jointed pieces with basic hand positions. During the 19th century, advanced technology led to improved appearance and movement of prosthetics. Further development in the 20th century included lightweight, durable materials and electronic robotic movement of the hook, along with a more aesthetic appearance.This prosthetic arm is an example of an aid used to assist people with missing limbs, whether born that way or as a result of injury. Prosthetic or artificial arm. Brown leather cylinder with elbow pad and straps with buckles. A single rotating metal hook has been fixed to the end.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, prosthetic, artificial arm, artificial limb, prosthetic arm, false arm, hook hand, amputee's aid, medical equipment, medical assistive aid, assistive aid, rotating hook, fake arm -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Metal spray producer associated with midwife Mary Howlett, c. 1866 - 1920
Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920.She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993.Made of a heavy white metal. Metal cap covers the actual spray applicator. There are two curved metal tubes leading to the outlet spray. In addition to the metal object there is a small metal connection with a small metal insertion. The metal connection is attached to a piece of old red rubber tubing.midwifery -
Vision Australia
Badge - Object, Tilly Aston badge and tie pin, 1980-1999
A tie clasp and badge remembering Tilly Aston, the founder of the Association for the Advancement of the Blind, was created. It has a cameo of Tilly Aston in gold, against a roughened gold background. A circle surrounds the head and above this "Tilly Aston" and below it, "Association for the Blind" in gold lettering. Metal tie clasp and metal pinTilly Aston Association for the Blindtilly aston, association for the blind, badges