Recovered from Portsea Channel circa mid 1980s by captain Doug Knight, Two Commando Company, when conducting shallow water dive training in the 1980s whilst based out of Officer Cadet School, Portsea.Two plates recovered from the Portsea Channel circa 1980s1. Orient Line of Royal Mail Steamers white china plate with logo on front and back. 2. White Star Line china plate with blue edge design and central logo.passenger liners, table wear, captain doug knight, portsea

Ore bearing rock brought out of the mine was crushed at the battery by heavy metal stampers and the fine material passed over copper pates coated with mercury. Gold particles would combine with the mercury forming an amalgam which was then scrapped off the copper plates and put into the amalgam bucket ready for retorting too extract the gold. The amalgam of mercury and gold was placed into the retort which was heated to evaporate the mercury. The mercury cooled as it ran down the pipe which was recovered to be reused leaving the gold behind. The gold would later be put into a crucible and heated to burn of impurities and the molten pure gold poured into an ingot.A heavy cast iron bucket 20 centimetres high, 16 centimetres in diameter at its base and 22 centimetres diameter at the top. It has a spout five centimetres wide protruding two centimetres. There is a handle which is a semi- circular shape 19 centimetre wide extending 14 centimetres above the bucket The inside of the bucket has an enamel coating. amalgam bucket, bendigo gold, gold retort

The Hydro mixer was attached to the kitchen tap which drove the mixing paddles.Mostly made of cast iron covered with green enamel. Its base is a 20 centimetre diameter and two centimetres high and shaped to hold a bowl, there is a protrusion eight centimetres long, four centimetres wide and nine centimetres high. A hinged section is attached to the protrusion of the base, it's a curved oval shape that's four centimetres by three centimetres at its base and tappers to four centimetres by two centimetres at the top, it then widens to an eleven centimetre diameter and three centimetres high shape that is parallel to the base, the centre of it is above the centre of the base. There is a removable eleven centimetre diameter plate screwed to the top. A two centimetre diameter 60 centimetre long plastic hose with a brass fitting on the end that is flared to four centimetres is attached to the side of the circular top. A one centimetre diameter metal tube is attached underneath that has two beaters on the end of it.HYDRO MIXER PAT APP FORfood preparation, hydro mixer

These scales were possibly used at Charing Cross Infant Welfare Centre, Bendigo. A mechanical balance scale. An oval cane basket 60 centimetres long, 38 centimetres wide and 13 centimetres deep sits on top of the scales. Two metal bars two centimetre wide and half a centimetre thick, underneath the basket hold it on the scales balance mechanism. On the other side of the balance mechanism is a 20 centimetre by 12 centimetre and one centimetre thick metal plate on which the known weights are placed. The base of the scales is a moulded metal consisting of two half domes 14 centimetres diameter and six centimetres high joined together by a ten centimetre long, four centimetre wide and six centimetre high section.4LB 14OZ 3JI CIII C2320baby scales, charing cross infant welfare

Circa 1890Spirit Coffee Percolator Glass lid, Metal bowl, metal stand ceramic base.KK Priv EK Wien Comfort. Winged Dragons either side of Lions head on name platepercolator, coffee preparation

This is a small commercially made tram model. Its design appears to be very loosely based on a Melbourne W Class tram design. The motorman’s cabin is realistic, but the body with its centre doorway does not look like any known tram designs. The wheels and their arrangement at the very ends of the tram are not realistic at all. No details of the maker, or where or when the model was made. Demonstrates making tramcar models for decorative purposesNickel plated steel model with operable wheels at either end. Two copies held.models, trams, tramcars

Detailed in The Met colour scheme of the 1980s with the logo of the early 1980s. Demonstrates an operable model of a Melbourne SW5 class tram.Model of Melbourne Melbourne tram W5 (actually an SW5) No. 812, electric model, made by Cooee Concepts Pty Ltd in China. The model is packaged in a wooden packing case with a blue felt base, contained within a cardboard outer case. The cardboard cover or case has a printed sheet giving details of the model and the history of the W5 Class tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swiveling bogies, the destination of St Kilda, showing route 16. Headlights function in the direction of travel. The package has a manufacturing date of 2008 printed on it. Contains a plastic cover strip, a plastic holder for the tram, a plastic lift-out strip, a printed Certificate of Authenticity, No. 553 of 700, and a folded sheet giving instructions for the use of the tram on a model tramway - up to 15V DC.models, the met, tramcars, w5 class, sw5 class, tram 812, cooee, cooee collectables

Detailed in Bendigo Tramways livery of their Restaurant Tram "Ninesevensix". Demonstrates an operable model of a former Melbourne W6 tram as a Bendigo Restaurant tram.Model of Melbourne Melbourne tram W6 976 dressed as the Bendigo Tramways Restaurant / Cafe tram "ninesevensix", electric model, made by Cooee Concepts Pty Ltd in China. The model is packaged in a wooden presentation case with a black felt base, contained within a cardboard outer case. The cardboard cover or case has a printed sheet giving details of the model and the history of the tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swiveling bogies, a destination of "Special" and showing route 01. Headlights function in the direction of travel. The package has a manufacturing date of 2008 printed on it. Contains a plastic cover strip, a plastic holder for the tram, and a plastic lift-out strip.models, tramcars, cooee, cooee collectables, bendigo tramways, tram 976, restaurant tram

A Wilson Stan Smith Monterey tennis racquet. Base of head features Wilson logo. Throat and shaft feature model name and gold and white shield device with 'S' at centre. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Butt cap has metallic plate adhered to it, engraved with the name 'JOE'. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

Silver-plated tankard inscribed: '1906/ANNUAL TOURNAMENT/OF THE HUDSON RIVER LAWN TENNIS ASSOCIATION/POUGHKEEPSIE, N.Y./MEN'S DOUBLES/FIRST PRIZE/WON BY'. Stamped on base: 'DERBY SILVER CO/QUADRUPLE PLATE/459'. Materials: Silver/Metaltennis

Silver-plated goblet, decorated with plant designs. Stamped on base: 'KNICKERBOCKER MFG CO./QUADRUPLE PLATED'. Materials: Silver/Metaltennis

Silver prize cup inscribed: 'LAWN TENNIS HANDICAP/TOURNAMENT/1ST PRIZE/WON BY/LIONEL PERRY/1888'. On base 'MAPPIN AND WEBB'S/PRINCE'S PLATE/RD 71553/W5349' Materials: Silver/Metaltennis

Silver trophy decorated with floral designs, racquets and image of male player. No insc. Stamps on base of feet state '3600/USA' and 'QUADRUPLE PLATE' and 'MERIDEN COMPANY'. Materials: Silver/Metaltennis

Handpainted plate featuring couple playing tennis. Printed on base, hallmark and 'MZ/AUSTRIA'. Materials: Ceramic, Pigmenttennis

Silver Trophy, awarded to ‘A.W. Dakin, K.H.S., 440 Yards Race, 1902’. Arthur Dakin, a resident of Kew was a student at Kew High School and Trinity Grammar School. He served as an engineer on troopships in WW1. In 1918 he was part of the Ross Sea Rescue Expedition under the command of Captain John King Davis.The trophy is an important piece of realia as it was won by A.W. Dakin while a pupil of Kew High School. Arthur Dakin is best remembered as a member of the Ross Sea Rescue Mission. Other items relating to Dakin are held by the Tasmanian Museum and Art Gallery and exhibited in a permanent exhibition - 'Islands to Ice'.Small silver-plated stem cup won by Arthur Dakin in 1902 while a student at the private Kew High School (1872-1908). The small cup stands on a circular base surmounted by a stem, leading to a petal-like base to the upper cup. Above this, the inscription is surrounded by a laurel wreath.A.W. Dakin : K.H.S. : 440 Yards Race : 1902arthur dakin, trophy, foot running, sport, ross sea shore party, ross sea shore rescue expedition, antarctica, shackleton antarctic expedition

Presentation to the Sergeants' Mess of 8/13 VMR by Cadre Staff member Sergeant RC Tetley when leaving the regiment at the completion of his posting. The presentation of a gift of this type was a common practice in regimental circles.A bespoke object with relevance to the character of an RAAC regiment using as it does a shell case from a fighting vehicle used by 8/13 VMR and indicative of business procedure in Mess meetings.Chairman's gong made of a chrome plated 76mm shell case suspended from a chrome plated metal frame mounted on a stained wooden base. Silver 8th/13th Victorian Mounted Rifles Regiment hat badge is mounted on front side of base. Stained wood and chrome plated metal gavel sits on two rests on rear side of base. Small engraved plaque attached to base at rear.On presentation plaque: "Presented to 8/13 VMR Sgts Mess by 2782108 Sgt RC Tetley Dec 1984"; and markings on base of shell case: "76mm ARMD C PW 175 ME 1970"sergeants' mess, 8/13 vmr, tetley

These tankards were often used as departure gifts from an army mess. Often a regimental badge was soldiered to the side and the tankard was engraved.Silver plated mug with handleUnderside of base "EG.NS A1", otherwise unengravedtankard, mess

Representative of an object frequently given to a departing officer by an officers' mess. The regimental badge is soldered to the pewter by local jeweller.Silver plated mug with handle and decorated with a Victorian Mounted Rifles cap badge affixed to the side."Mayfair" on underside of base, otherwise uninscribed.8/13 vmr, badge, officers' mess

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. This is one of a collection of mugs presented by Officers of a Light Horse Regiment drawn from rural and regional Victoria in the period between the World Wars.Silver plated mug with handle and inscribed on side" 20th Australian Light Horse Officers Mess. Presented by Lieutenant S.W. Ross" and on base "Rigert EPNS A1 " 10 "ross, 20th, light horse, mess

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. This is one of a collection of mugs presented bt Officers of a Light Horse regiment drawn from rural and regional Victoria in the period between the World Wars.Silver plated mug with handle and inscribed on side" 20th Australian light Horse Officer's Mess. Presented by Lieut A.W. Tanner 1936" and on base " Rigert EPNSAI 10 "20th, light horse, tanner, mess

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. This is one of a collection of mugs presented by officers of a Light Horse regiment drawn from rural and regionalVictoria in the period between the World Wars.Silver plated mug with handle and inscribed on side."20th Australian Light Horse Officer's Mess. Presented by Lieut N. I. Morrison" and on base "Rigert EPNSAI 10" 20th light horse, officers' mess, morrison n i lieutenant

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. Lieutenant Fyffe enlisted at the outbreak of war and served as VX 42774 with the 9th Division Cavalry Regiment in North Africa and was promoted to captain. During the attack on Trig 22 on 17 July 1942, Captain Fyffe, commanding a composite squadron, manoeuvred his tanks to knock out machine guns and anti-tank guns enabling 2/32 Battalion to capture the objective. Captain Fyffe was awarded the Military Cross for his leadership and courage in the action. This was 9th Division Cavalry's first tank action of the war. This is one of a collection of mugs presented by Officers of a Light Horse regiment drawn from rural and regional Victoria in the period between the World WarsSilver plated mug with handle and inscribed on side"20th Australian Light Horse Officer's Mess. Presented by Lieutenant H.G. Fyffe" and on base "Rigert EPNSAI 10 "officers' mess, 20th light horse, fyffe h g

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. This is one of a collection of mugs presented by Officers of a Light Horse regiment drawn from rural and regional Victoria in the period between the World WarsSilver plated mug with handle and inscribed on side"20th Australian Light HorseOfficer's Mess. Presented by Lieutenant G.A. Bryant", and on base "Rigert EPNSAI 10"bryant, mess, 20th, light horse

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 redesignated 20th Pioneer Battalion and deployed to Merauke, Dutch New Guinea. The regiment was disbanded at the end of the war, 1945. 20th Light horse was the only light horse unit to serve overseas in WWII. .This is one of a collection of mugs presented by officers of a Light Horse regiment drawn from rural and regional Victoria in the period between the World Wars.Silver plated mug with handle and inscribed on side."20th Australian Light Horse Officer's Mess. Presented by Lieutenant G. McC. Fairley"; and on base "Rigert EPNSAI 10"20th light horse, fairley g mcc lieutenant, officers' mess

The 20th Light Horse ( Victorian Mounted Rifles ) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizens Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSWThis is one of a collection of tankards presented by officers of a Light Horse Regiment drawn from rural and regional Victoria in the period between the World Wars.Silver plated mug with handle and inscribed on side" 20th Australian Light Horse Officer's Mess. Presented by Lieutenant Crawford A. 1936. On base EPNSAI 10"military, mug, pewter, mess, light horse, victoria, militia

Table lamp with tubular wick, paraffin. Cast brass decorative base with four feet, cast brass interior and burner, with glass exterior and covering. Pink and white base colours on glass, with floral pattern printed on both sides of lamp. Cover a semi-circular shape with round neck opening on top.… Success…' (some words unreadable) embossed on burner platelighting, kerosene & oil, table lamp, brass, glass, paraffin, floral

Condiments set including stand made of brass (?) with four ball feet, flat base, wire frame and handle to fit four glass containers. 1st glass container: rectangular glass box (no lid) with moulded geometric pattern. 2nd glass container: square base with round neck, same geometric pattern, broken stopper. 3rd glass container: square with metal hinged lid with knob.E.P.N.S., 1' (Electro-Plated Nickel Silver), embossed on frame and metal lid of 3rd itemdomestic items, food and drink consumption, condiments, glass, rack, e.p.n.s., metalwork

Large white oval platter with light blue trim on lip. Depression in middle of platter and flat base.No visible markingsdomestic items, crockery, kitchen, platter, large plate, .

Nickel plated skim milk and cream separator. Splits into six pieces; some pieces are believed to be missing. Two pieces are cylindrical and have long spouts that curve downwards at the ends. Conical shaped piece which goes in centre and has hole through the middle (This piece has removable brass screw). Long straight rod with wooden handle and small, threaded section at other end. Rounded, circular rubber band, probably used as seal. Large round pot with thin flanged rim, seated on raised base edges. Tap with fitting on one side. Round piece with three evenly spaced legs. both sides slightly domed - fits into upper separator piece.On the brass nut of the conical shaped piece is engraved "unscrew" with an arrow adjacent. "10516-C" with another arrow and oval shaped trademark with lines inside. Embossed on the external casing of the conical piece is "2".food technology, dairying, milk, cream, dairy, separator, nickel, steel.