Showing 953 items
matching wheels
-
Ballarat Tramway Museum
Photograph - Colour Photograph/s - set of 6, Carolyn Dean, 9/19/1994
Yields information about the transportation of horse tram No. 1 for display elsewhere.Series of six colour prints by Carolyn Dean of the offloading of cable tram No. 1 after being displayed at the Central Highlands Historical Association fair on 9 October 1994. .1 - both wheels almost on the rails .2 - ditto .3 - on the rails again .4 - pushing the car up the hill at bit to clear the low loader .5 - waiting by itself .6 - rolling down the hill to the junction. Printed on Kodak paper For additional photographs see Reg Item 4064.1, 4064.2On rear in ink "9.10.94, C. Dean"btm, horse tram, chha, wendouree parade, tram 1 -
Melbourne Tram Museum
Document - Report, Melbourne & Metropolitan Tramways Board (MMTB), "Class W7 Tramcars", c1956
Report - 6 foolscap sheets, stencil cut and duplicated titled "Class W7 Tramcars", giving a detailed written description of the trams (1001 to 1040). References a photograph which is not included. Gives notes on the General Design, body construction, windows, doors, finishes, seats, motorman's compartments, sound insulation, ventilation, lighting, signalling, destination signs, trucks, wheels, brake gear, motors, current collection control equipment and dimensions. Notes the Authority of the Chief Engineer Mr. D. H. Eakins.trams, tramways, w7 class, tramcars, preston workshops, tramcar construction, specification -
Ballarat Tramway Museum
Photograph - B&W print of donated negative - set of 5, State Electricity Commission of Victoria (SECV), c1936
Yields information about the installation of the wheel grinder in the Ballarat depot during the 1935/1936 rehabilitationSet of 5 Black and white photo prints from collected negatives of under floor wheel grinder at the SEC Ballarat depot building, during refurbishment by the SEC during the mid 1930's. 1353.1 - General arrangement of grinding wheels, jacks, moving rails, motor control, switch and wall mounted resistor grids. 1353.2 - Close up of the grinding wheels, jacks and moving rails. 1353.3 - view looking along the pit, showing the drive motors, belts and switches 1353.4 - view looking along the pit with the outside pit covers in place and rails in place. 1353.5 - similar to 1353.1 - but showing motors and drive belts, but not wall mounted equipment. See Reg Item 3806 for a photograph of the grinder in use. Copy 2 - of all above photos - large format prints (203H x 253W) - added 28/7/2007, ex Alan Bradley holding of prints, received 5/2007. See also Reg Item 3906 for a mounted set of these photographs. Negatives scanned at 3200dpi and images updated 14/5/2020.tramways, trams, wendouree parade, sec depot, rehabilitation, wheel grinder -
Mont De Lancey
Decorative object - Conestoga Wagon, Mr Chas W Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Canestoga Wagon replicates the vehicle that enjoyed respect from the public during the 1880's. A model of a long covered Conestoga Wagon with two horses, brown and tan. The cream fabric covers curved shaped metal bands and is laced with string around the base to attach it to the wagon.It has a green base, green wooden seat and footrest. There are two wooden barrels attached by wire on one side and the other side has a luggage box. It has two small gold painted spoked wheels with painted black tyres at the front and two larger ones at the back. The forerunner of the Conestoga Wagon had its origin in Europe as a mobile home for shepherds and nomads in the early 1800's. The east coast of America became home to people from all over Western Europe so the old wagon designs were carried to the New World. The wagons were named after a river in Lancaster County Pennsylvania where the Stutz family built them for the western treks of history. Fondly known as the 'Prairie Schooner', the cost in 1840 was $48.00, unpainted spare wheels $8.00, Lawson axles $12.00. They came in 12 and 14 feet beds.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, drays -
Mont De Lancey
Decorative object - Conestoga Wagon, Mr Chas W Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Canestoga Wagon replicates the vehicle that enjoyed respect from the public during the 1880's. A model of a long covered Conestoga Wagon with two horses, brown and tan. The cream fabric covers curved shaped metal bands and is laced with string around the base to attach it to the wagon.It has a green base, green wooden seat and footrest. There are two wooden barrels attached by wire on one side and the other side has a luggage box. It has two small gold painted spoked wheels with painted black tyres at the front and two larger ones at the back. The forerunner of the Conestoga Wagon had its origin in Europe as a mobile home for shepherds and nomads in the early 1800's. The east coast of America became home to people from all over Western Europe so the old wagon designs were carried to the New World. The wagons were named after a river in Lancaster County Pennsylvania where the Stutz family built them for the western treks of history. Fondly known as the 'Prairie Schooner', the cost in 1840 was $48.00, unpainted spare wheels $8.00, Lawson axles $12.00. They came in 12 and 14 feet beds.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, drays -
Mont De Lancey
Decorative object - Conestoga Wagon, Mr Chas W Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Canestoga Wagon replicates the vehicle that enjoyed respect from the public during the 1880's. A model of a long covered Conestoga Wagon with two horses, brown and tan. The cream fabric covers curved shaped metal bands and is laced with string around the base to attach it to the wagon.It has a green base, green wooden seat and footrest. There are two wooden barrels attached by wire on one side and the other side has a luggage box. It has two small gold painted spoked wheels with painted black tyres at the front and two larger ones at the back. The forerunner of the Conestoga Wagon had its origin in Europe as a mobile home for shepherds and nomads in the early 1800's. The east coast of America became home to people from all over Western Europe so the old wagon designs were carried to the New World. The wagons were named after a river in Lancaster County Pennsylvania where the Stutz family built them for the western treks of history. Fondly known as the 'Prairie Schooner', the cost in 1840 was $48.00, unpainted spare wheels $8.00, Lawson axles $12.00. They came in 12 and 14 feet beds.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, drays -
Mont De Lancey
Decorative object - Conestoga Wagon, Mr Chas W Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Canestoga Wagon replicates the vehicle that enjoyed respect from the public during the 1880's. A model of a long covered Conestoga Wagon with two horses, brown and tan. The cream fabric covers curved shaped metal bands and is laced with string around the base to attach it to the wagon.It has a green base, green wooden seat and footrest. There are two wooden barrels attached by wire on one side and the other side has a luggage box. It has two small gold painted spoked wheels with painted black tyres at the front and two larger ones at the back. The forerunner of the Conestoga Wagon had its origin in Europe as a mobile home for shepherds and nomads in the early 1800's. The east coast of America became home to people from all over Western Europe so the old wagon designs were carried to the New World. The wagons were named after a river in Lancaster County Pennsylvania where the Stutz family built them for the western treks of history. Fondly known as the 'Prairie Schooner', the cost in 1840 was $48.00, unpainted spare wheels $8.00, Lawson axles $12.00. They came in 12 and 14 feet beds.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, drays -
Orbost & District Historical Society
buggy lamps, 1880's -1910
In the beginning of the19th century, the main mode of transportation was the horse and carriage. Even after the advent of the railway, remote areas still relied on the horse for local transport.Until Australian coachbuilders began making buggies from the 1860s, most were made in America Buggies with four wheels were light but comfortable. Many had hoods to keep the sun and rain off passengers. They were generally owned by doctors, ‘squatters’ and business people. Some had small turn-out seats at the back for children. Lamps are placed at different places on the carriage sides: 1 lamp on each side placed close to box seatThese lanterns are examples of lighting devices used in the time of horse and carriage transport.Two kerosene lanterns - buggy lamps.They are rectangular in shape and have a chimney on top. Both have carrying handles.There are 3 glass windows having two clear white lights and one small red round light on the back. The ceramic burner is made by Barton's.On ceramic wick holder - B in the middle of BARTONS B Underneath is TRADE MARK lighting kerosene-lights buggy-lamps transport lanterns -
Warrnambool and District Historical Society Inc.
Book - Illustrated Catalogue of Malleable Iron Hardware, The Eberhard Manufacturing Company, No. 7 Illustrated Catalogue Malleable Iron Hardware, 1908
Catalogue from American company of malleable hardware itemsThis is a book of 732 pages. It has a yellow cloth cover with black printing and pages edged in red. The contents contain an index and pages of black and white sketches and text.non-fictionCatalogue from American company of malleable hardware itemscarriage and wagon hardware, eberhard manufacturing company -
Walhalla Museum
Merryweather Fire Cart, Merryweather & Sons, 1903
Item is a red Merryweather Fire Pump. Item is pulled to scene of the fire by horses and the a team of men move the handles on each side in a see-saw motion pumping water from the creek into hoses to fight the fire. Item is situated on top of fore wooden Spock wheels, each with a steel band around the out side. The cart features leaf suspension, outlets on each side, foldable handles on each side, Compartments on each side for hose storage and room to seat six firefighters plus the driver. -
Warrnambool and District Historical Society Inc.
Clock, Mantle Clock, Early 20th century
This is a mantel clock used probably in the dining room or lounge room of a house. It would have been a common item in a household in the 20th century and was often an heirloom passed down from grandparents. This type of clock is an attractive item and is still regarded as highly desirable today.This clock has no known local significance but is retained as an attractive and historical item and serves as an example of a high quality household object of the past. This is a black wooden clock with a rectangular base with ornamental metal corner pieces and two ornamental gilt metal patterns. The clock has an overhanging rectangular top with two gilt handles on the side. Also on the sides of the lock are two green inset faux columns with two metal ornaments in between. The brass mechanism at the back of the clock has four wheels. The clock face has a glass front, black numbers and metal hands. There is a strip of brass around the outside of the face. There are two key holes on the face. 'Sessions'warrnambool, mantel clock -
Bendigo Historical Society Inc.
Photograph - RAILWAYS COLLECTION: WILLIAM BEAZLEY BULLOCK TEAM RILEY 1890''
Railways Collection -Black and white photo -William Beazley Bullock Team Riley 1890. The photo is a little hazy -it shows a timber mill. Ten men are posing for the photo and a log is being pulled up a ramp on a bogey into the mill (mechanically ?). A (30 Ft long ?) is being pulled by a Bullock team consisting of ten Bullocks. The log is on a four wheeled cart .The wooden spoked wheels are about 4- 5 ft high One man is holding an axe. There is a square chimney behind the mill and there appears to be a largish town in the background.photograph, building, william beazley bullock team riley 1890' -
Ballarat Tramway Museum
Functional Object - Tramcar, Meadowbank Manufacturing Co. Sydney, SECV Tram No. 11, 1915
One of a number of this type of tram still in working order in Australian tramway museums. Has no motors. Interior one of the few given a paint finish by SEC, others are varnished. Has timber panelled sides.Single truck (4 wheels), drop ends, modified open California combination to closed car, with 4 doors, 2 at either end, longitudinal seats, sliding internal doors, air brakes. - electric motors removed. Acquired from the Daylesford Historical Society. For an article on the tram see the Oct. 2018 issue of Fares Please! and the Museum Fleet page on the website. See Fares Please - Oct. 1977, Destination City, Destination Eaglehawk, BTPS Annual Reports and March 1980 Fares Please!trams, tram 11 -
Maldon Vintage Machinery Museum Inc
Oil Engine
Bartram type AK, 5 HP horizontal cylinder water cooled magneto ignition oil Engine mounted on a metal and timber chassis with 4 wheels. It has its own cam driven water pump which pumps cooling water over metal gauze for evaporative cooling. Painted green. It has two flywheels, one at each end of the crankshaft, with a flat belt pulley attached to one flywheel. Cooling tank of galvanised steel with Bartram stencilled on one side. In working order.Cast nameplate on front of crankcase with a Bartram logo cast on also "Bertram / Type / AK" -
Maldon Vintage Machinery Museum Inc
Invalid Car
Battery powered invalid tricycle. Black body-work, wire spoked wheels, 2 small headlights. Appears to be built to accommodate a reclining figure. Contains 2 crimson corduroy cushions, one solid seat cushion filled with Dunlopillo, the other a rectangular back-rest cushion filled with latex foam rubber. Original seat cushion had sage green top with blue/white striped mattress ticking sides & back. Original back support cushion had a cloth label - see below. On an aluminium plate on top of the electric motor :- "Chassis No. 2067, Type EC2, 24-36 volts / RPM 2700 Serial No. 2161". On back cushion: "TEX Foam / Yours for restful sleep / Contents / New Latex Foam / Made by TEXFOAM PTY LTD. Mordialloc. Victoria"transport ..... motor ...... invalid -
Surrey Hills Historical Society Collection
Photograph, Mr Wally Ives delivery truck decorated for Empire Day, 1937, 1937
Frank Leslie Barkla was a keen amateur photographer and member of the Melbourne Camera Club. This is an almost identical shot to SH0379, however this is a better print with greater contrast.Black and white photo of a decorated vehicle owned by Mr Wally Ives outside his fruit and vegetable shop at 154 Union Road, Surrey Hills on occasion of Empire Day celebrations in 1937. The truck is decorated with the foliage of palm trees, ribbons, strings of round balls, which are also arranged in coronets, pumpkins and strings of carrots and Union Jack flags. The wheels of the vehicle are decorated with flowers. Wally Ives' name is on the side of the truck; THE EMPIRE is written on the door of the truck and in balls attached to its side.transport, empire day, parades and processions, wally ives, frank leslie barkla, greengrocers, fruiterer -
Melbourne Tram Museum
Document - Personal Papers, Melbourne & Metropolitan Tramways Board (MMTB), "Principle Dimensions of Tram Body Work" and "ASEA Truck", 1975
Set of two personal papers hand written on approx. A5 sheets, ,1 - "Principle Dimensions of Tram Body Work" - lists various dimension including ceiling clearance height, door sizes, step for Z class trams, 1041 and the W7. .2 - "ASEA Truck" - 8 sheets stapled in the top left hand corner, describing the various dimensions, systems, mass, braking, motor, gear boxes, wheels, suspension systems, motor alternators, trolley pole head, foot controllers and the ASEA Tramiac unit.trams, tramways, z class, new trams, w7 class, 1041, prototype tramcar, bogies, trucks, asea, brakes, tram 1, tram 1041 -
Melbourne Tram Museum
Slide, Keith Caldwell, 12/03/1960 12:00:00 AM
Agfa Colour slide, cardboard mount, by Keith Caldwell dated 12 March 1960, of W5 809 turning from Market St into Flinders Lane. Tram has two sets of monograms and numbers on the sides, is fitted with trolley wheels and showing route 55. Has an advertisement for British Bedford's vehicles on the front. The strip for the advert racks on the sides of the trams has been installed. In front of the tram is a remnant of cable tram track in wood blocks. In the background is the Flinders St Viaduct and the Port of Melbourne Authority Building.in ink on top of the slide "W5 (Cable tracks), Market" and hand stamped "12 Mar '60"trams, tramways, market st, flinders lane, w5 class, cable trams, tram 809 -
Melbourne Tram Museum
Photograph - Black & White Photograph/s, Tramway Museum Society of Victoria (TMSV), c1970
Black and white reproduction of a photo that appeared in the Melbourne Sun News Pictorial, 6 November 1923, of the aftermath of the fire at the Zoo horse tram depot. Has workers wheeling wheels. The Timeline history of Melbourne trams - Barry George et al, dates the fire as 4 November 1923, during the Police Strike. Four horse tram cars were destroyed as a result. The photo has mounted onto a Norman Co. cardboard tag using an adhesive substance. Photo could be peeled off card if needed.On the rear of the card is the TMSV Address stamp and on the rear of the photograph in ink "Melbourne Sun News Pictorial, 6 November 1923".trams, tramways, zoo tram, police strike, fire -
The Beechworth Burke Museum
Photograph - Photograph - Reproduction
After gold was discovered to be deposited "for miles along Woolshed Valley" in the early 1850s, the Woolshed became a major site of mining activity in the north-east . This region was divided into large claims of 80 yards long, one of which was the one depicted in this photograph, called 'Big Johnson's Claim'. Claims such as this utilised a range of technology, including water wheels, steam engines, sluices and toms, most of which would not arrive until after 1856 when this photograph was taken. The Woolshed initially became prosperous in 1855, and labourers, such as the ones depicted in this photograph, engaged in sinking work for 7 pounds a week, whilst other mining labourers could earn up to nine. The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about the operations of mining claims, particularly of the Woolshed Valley area that this photograph documents. This image is important for current research into the history of Woolshed, which was a major site of mining significance and operations. Therefore, this image has the capacity to be beneficial for research into society and the motivations of those living and working in this region during this period and therefore, has social significance. The Beechworth Burke Museum has additional images relating to gold sluicing and the Woolshed area which can be analysed and studied alongside images like this one. A black and white rectangular photograph printed on matte photographic paper.Reverse: 7791 / page 34. / 52% / Big Johnstone / Claim on Woolshed Goldfields / 1856 / Note canvas [illegible] building / Burke Museum /woolshed, mining, claims, mining claims, big johnson, gold -
Wodonga & District Historical Society Inc
Functional object - Hand operated seed broadcaster
Seed broadcaster were used to distribute seed across a small area or to fill in patches where seeding has been missed. This method does not ensure a uniform distribution of seeds unless the person using the machine walks at a very measured pace. It also requires a lot of time and manual labour if used in larger areas. It was most used for planting cover crops, grains, grasses and similar plants that do not need to be in neat rows. The hand-crank broadcast seed spreader was invented in 1868 by Samuel S. Speicher (aka. Spyker) in Indiana, USA. By 1955 new developments included the invention of a seed broadcaster on wheels and these smaller spreaders started to disappear.This item is representative of agricultural machinery used on a local, national and international level in the late 19th and early 20th century.A metal hand seed broadcaster. A hopper at the top was the receptacle for seed. The wheel with a handle on the side when turned drives the cogs attached to an axle. This action rotates the attached spindle with blades to propel seed out the front of the broadcaster. The broadcaster would have had a shoulder strap and a bag of seed would have been added to the hopper and secured with twine through the holes around the top.agricultural tools, farm machinery -
Flagstaff Hill Maritime Museum and Village
Wagon, circa 1850s
Bostock & Manifold were all from pioneering families in the Western District of Victoria almost from the time of settlement. Family history: The Bostock family were prominent in Warrnambool from the 1850s to the 1880s. Patriarch Robert Bostock had in 1813 been transported to Sydney from Sierra Leone for having 'felonious traded in slaves' and sentenced to 14 years transportation. He moved to Tasmania in 1821 where he died in 1847. A number of his children came to Port Phillip. Edward Robert Bostock held the Jellabad run from 1849 to 1853. George Bostock (1826-1858) was a Warrnambool Shire Councillor in 1856. Thomas Edward Bostock (1828-1874) was a Shire Councillor in the late 1860s. Augustus Bostock (1833-1920) lived in Warrnambool. Augustus Bostock was the 9th child of Robert and Rachael Bostock of Vaucluse Epping Forest, Van Diemen's Land. He was only 4 years old when his mother died. He was inspired by his father to seek his fortune in the Western District of Victoria. He arrived around 1850. He married Margaret Aitkin in July 1865. Augustus owned several properties in the district and leased others. He sat on the court of Warrnambool, Mortlake or Hexham as required. He resided at Marramook in Hawkesdale and later moved to Vaucluse in Hopetoun Road Warrnambool, where he died in 1920 at the age of 87. The Wagon is significant locally and state wide for its association with Augustus Bostock who was involved in many aspects of life in the Western District of Victoria, racing, cricket, and social activities to name a few. Bostock & Manifold were all from pioneering families in the Western District of Victoria almost from the time of settlement. The wagon is significant for its historical and economic association with the local Warrnambool business of Manifold & Bostock. These men had leased and owned vast tracts of land and operated businesses around the district together at various times often associated with the farming industry. One example is the Manifold & Bostock store and flour mill from which the wagon dray is believed to have been associated with for the delivery of goods. Their flour mill began operation in 1850 in 7-17 Stanley St South Warrnambool and was known as “Jetty Mills” Manifold and Bostock in 1858 purchased the Mill from John and G Elliot (brothers) with half an acre of ground and a cottage for £1600. It appears addresses of the company changed over the years as the town grew. These are listed in “Jones, Lewis & Peggy flour mills of Victoria” showing the company operating from, Fairy Street and later at the Merri River near the cutting, known as Banyan and Merri Streets. The company ceased trading in 1870. The Wagon Dray is also an example of agricultural freight and general transportation during the 1800 and 1900 century.A four-wheeled wooden horse-drawn wagon with flat top described as a Wagon Dray in historical writings. Painted brown and black. The wagon has rear brakes, wooden, operated from a metal handle at the front of the Wagon. Front wheels are attached to a turnstile to allow easy turning of the wagon. This flat-topped, horse driven, four-wheeled Wagon was used for cartage by the business of Manifold & Bostock, Warrnambool. The original sign writing of the wagon is obscured or painted over. There is a feint mark of lettering to the sides and back edges of the cart Manifold & Bostock. "Manifold and Bostock" very feintflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, flagstaff-hill-maritime-village, cartage, manifold and bostock of warrnambool, manifold family of western victoria, bostock family of western victoria, four wheeled wagon, wagon, horse drawn wagon, farm wagon, aitkin, aitkin bostock manifold, dray, aitkin family, cart, aitken, flour mill -
Bendigo Historical Society Inc.
Photograph - BENDIGO CENTENARY COLLECTION: YOUNG MALES IN COSTUME IN PARK, 1951?
Black and white photograph. Four young males in costume, two goats - one being milked, one male sitting on jinker with wood wheels. Crowd of people watching in background. Trees at back in park. Inscriptions: on back 'MP' 186', circular purple stamp 'Royal Historical Society of Victoria, Bendigo Branch'. '1960', '97', 269A'. History of object: Previous Acc. No. 'MP 186'. James Lerk 'Centenary of Bendigo?' On back - 'Copyright Bendigo Advertiser', 'Bendigo Advertiser Photographic Service' . 'For re-order quote CD 269A'Bendigo Advertiserperson, group, centenary ?, see also 2000/511/01, 2000.512.01, 2000.513.01, 2000.514.01, 2000.515.01, 2000.516.01, 2000.517.01, 2000.518.01, 2000.519.01, 2000.520.01, 2000.521.01, 2000.522.01, 2000.523.01, 2000.524.01 -
Southern Sherbrooke Historical Society Inc.
Photograph, Bringing in a log near Belgrave
Photo of a worker bringing in a log on a dray with what appear to be narrow steel wheels. Dray is being pulled by eight or ten steers or small bullocks. Heavy bush and tall, straight timber on side of the road. Most likely Sherbrooke Forest. Road bends to left behind team then possibly to the right, going up a small rise. The man could be well-known bullocky Bill Martin. He is dressed in a wellworn hat, a pale shirt with sleeves rolled up, and darker pants, and is carrying a long, slender stick or possibly a whip in his right hand. -
Melbourne Legacy
Furniture, Table and Chairs, Not known, believed to be during the 1920's
The table and chairs once belonged to the Officers' Mess, 24th Battalion. From 1928 - 1936 the CO 24th Battallion was Lt Col S.G. Savige, DSO MC. It was during this time that the chairs were made and used for dining-in nights. During the a ceremony of remembrance, each officer stood behind his chair and called the name on its back as a mark of respect for those KIA during WW1. At the inaugural meeting of the Club, from which arose Melbourne Legacy in September 1923, eight of the fourteen members had worn the colour patch of 24th Battalion.The connection to Savige and the fact that many of his officers from 24th Battalion became members of Melbourne Legacy. This table and its chairs were formally gifted to Melbourne Legacy on 9th May 1956 when the Club moved to Legacy House. They have been used since in the Club's Board Room, now located on level 1, Legacy House, 293 Swanston Street, Melbourne. Two Legatees were responsible for fully refurbishing the table and chairs - Legatee Gordon Beith (Morrabbin Branch) and Legatee Ted McKenzie (Footscray/Sunshine Branch) Board Room Table - Clear varnished timber table with a two piece glass top Table legs are turned timber on wheels x 5. Two at each end and one in the centre. Chairs - Clear varnished timber with leather cushions x 20. Each chair has an engraved plaque with an officer's name from 24th Battalion. With the exception of one who died shortly after returning to Australia all were KIA in various battles during WW1. The 24th Battalion (the Kooyong Regiment) Robinson Road, Surrey Hills. Vic Names inscribed on each chair: Lt A.L. Bacon, 2Lt W.A. Baldie, Capt J.C.L. Biggsley, Lt P.S. Carne MSM, Lt J.B.N. Carvick MC, Lt J.R. Clarke, 2Lt F.M. Coffee, Lt P.G. Denton-Fethers, Lt W.S. Finlay, Capt J.H. Fletcher, Lt A.C. Fogarty, 2Lt A.G. Gilchrist, Lt J. Harris, Lt A.J. Kerr, Maj. C.E. Manning, Capt G.L. Maxfield MC, 2Lt H.L. Rhynehart, Capt W.H. Tatnall, 2Lt R.N. Thomas, Capt C.M. Williams MC furniture, 24th battalion -
Melbourne Tram Museum
Book - Comic Book, Geoff Cook, "Tram Fury", 1976
Comic book - 32 pages + card covers titled "Tram Fury", with the subtitle "when the slowest driver on eight wheels meets the fastest dragster of the age - there can only be one outcome ...." Written and illustrated by Geoff Cook 1976, published by Falcon Comics. Colour cover with green back cover. Publication details on rear cover. Based on a story about Melbourne W2 tramcar drivers racing each other. 2nd copy added 27--1-2019 from Donation of Barry Brooks ex Bob Prentice Collection.trams, tramways, melbourne, comics -
Melbourne Tram Museum
Document, Melbourne & Metropolitan Tramways Board (MMTB), Untitled - "SW6 class", May. 1939
Report - 7 quarto typed sheets - untitled, but gives a detailed description of the design basis and construction of the SW6 class tram. Dated May 1939. Details the design after Bell's overseas trip the previous year. Details dimensions, seating, ventilation, seating, doors, structure, construct, timber, materials, door engines, cab equipment, PA system, interior appearances, flooring, colours, lighting, conductor's bell / signals, trucks, bolster, wheels, brake shoes, braking, motors, acceleration, performance, controllers, contactors, compressor. Gives a detailed list of the specifications.Has a note in pencil about a typographical error on the bottom of the sheet.trams, tramways, sw6 class, specification, tramcars, tram controllers, tram equipment, tramcar design -
Bendigo Historical Society Inc.
Photograph - HANRO COLLECTION: PHOTOGRAPH OF HANRO WEAVING MACHINE
BHS CollectionPhotograph of Hanro Weaving Machine: Black and white photo with white border. The photo has two men standing behind the weaving machine showing pulleys and wheels as finished fabric is rolled out at the end. Top left hand side hand printed in blue ink is *MP 360*. On the back is a circular stamp in blue ink of the Royal Bendigo Historical Society of Victoria. Hand printed in black ink is *MP 360 Weaving Machine Hanro Mills Bendigo*. Bottom left is hand written in pencil is the word *Hanro* with a line under it. Box 116Aphotograph, building, hanro, hanro -
Melbourne Tram Museum
Administrative record - Framed Document, Noyes Bros, 1923
Framed invoice No. E.1675 dated 30/4/192? (assumed 1923), from Noyes Bros (Melbourne) Pty Ltd. to the MMTB for the supply and delivery of one(1) Brill double ended safety car with a Brill 79E truck, excepting wheels and axles. Provides details of price, and customs charges dated 9/1/1923. Has an accounting stamp with initials in blue pencil. Provides details of Noyes Bros contact details, order numbers and phone numbers. Framed in a wooden frame, glazed and card board back and hanging cord.trams, tramways, birney, mmtb, noyes bros, tramcar construction -
University of Melbourne, Burnley Campus Archives
Photograph - Colour print, Spraying in the Orchard, 1890's
Large coloured photograph mounted on heavy cardboard showing Orchard and pruned leafless fruit trees being sprayed by 2 men one on left in hat, coat and apron, another younger man on right no hat; both spraying from hoses coming from horse drawn tank with large iron wheels (2) and motor driven pump mounted behind tank. Behind fruit trees, planted in rows, is a low, white, wooden post and rail fence on right and there is a background of eucalypts, some white trunked. Some colouring on the photograph.men, spraying, horse drawn cart, spraying equipment, students working outside, orchard, fruit trees