Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s.A metal rake with a wooden handle. The head is 25 centimetres across with eight half centimetre diameter tines that are seven centimetres long. the wooden handle is 152 centimetres long and three centimetres diameter, the top 20 centimetres is painted black. Part of the Harris Collection.harris collection, rake

Tin box in brown and gold square design '170016'. Gold painted outside with red stripe housing brown lines with solid brown area where brass handles attached. Lockable. Black interior paint. 3 money sections, detachable as a whole. Each section has a lid with a small handle. storage room underneath. Hinged lid (patent 4489?0 and 'note' storage below. Exterior handles both sides. Patent 4489?

Yields information about the way the SEC marked the achievement of safety records by workers and yields information about the work of the SEC Ballarat tram depot.A flag or banner made for the SEC to enable an award to work sites that had achieved 100,000 man hours without an accident. Base materials for the flag is blue cloth with blue cotton seamed edges, the left hand side has been overlain by about 15mm to provide a part where a dowel or rope could be passed through. Has the 100,000 Man Hours area with a yellow paint overlay and the 100,000 hours in black paint. The Accident Free is in a darker yellow pain and the SEC Logo of the Electricity Supply Department is in the same yellow base with black lines. On the rear is the Evan Evans manufacturing logo with the Olympic rings giving address and that they were the official flag makers for the XVIth (16th) Olympic games (Melbourne 1956) and the VIIth (7th) British Empire and Commonwealth Games (Perth 1962). This indicates the flag was made early to mid 1960's. Was on display - Item to Display cabinet 02-04-01 on 12/7/2011 until 1/2017 - then to box 01-03-38.trams, tramways, sec, safety, awards, flags, accidents

The funnel colours on the model indicate the ship it represents was one of the early ships of the Allan shipping Line designated as a Royal Mail Carrier. Funnel colours are used to identify a ship's owners while at sea from a distance by other vessels. The Allan Shipping Line was started in 1819, by Captain Alexander Allan of Saltcoats, Ayrshire, trading and transporting between Scotland and Montreal Canada, a route which quickly became synonymous with the Allan Line. By the 1830s the company had offices in Glasgow, Liverpool and Montreal, with all of Captain Allan's five sons actively involved with the business. But his second son, Sir Hugh Allan, spearheaded the second generation. In 1854, Hugh launched the Montreal Ocean Steamship Company as part of the Allan Line, and two years later ousted Samuel Cunard to take control of the Royal Mail contract between Britain and North America. By the 1880s, the Allan Line was the world's largest privately owned shipping concern. In 1891, the company took over the State Line, founded in 1872, and was often referred to as the Allan & State Line. In 1897, Andrew Allan amalgamated the various branches of the Allan shipping empire under one company, Allan Line Steamship Company Ltd., of Glasgow. The company by then had added offices in Boston and London. In 1917, under Sir Montagu Allan, who represented the third generation of the Allan family, the company was purchased by Canadian Pacific Steamships, and by the following year, the Allan name had disappeared from commercial shipping. The Allan Line fleet had evolved for decades, changing as new ships were added, lost at sea, sold, or scrapped. The model in Flagstaff Hill's collection could be the SS Canadian or Indian; both were early Allan steam packets that had helped the Allan company secure the Royal Mail Atlantic contract in 1856.The model is of a Royal Mail steamship, with the probability the original ship was owned by the Allan Shipping Line in the mid-19th century and primarily used for the Atlantic mail run between England and Canada. Given the funnel colours and ship design, the model could be the SS Canadian or the Indian; both were the first ships for the company. The Allen line became the most successful shipping company of the time used for emigration and the transporting of mail.Ship model; steamship and sail vessel in use around the 1860s. Handcrafted model steamship with twin funnels painted black, white and red and three masts with square-rigged sails. The ship model is mounted on a gold-painted board. The ship was donated with a fitted wooden case.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, ship model, steam and sail vessel, handcrafted ship model, steam vessel, model making, handmade, red with narrow white band below black top., red shite and black funnel, allan shipping line, steam and sail ship, two funnels, wooden sailing shipo, three-masted ship

Cypriot White Painted Ware from the Cypro-Archaic PeriodThe rim painted black, the top of the neck with two encircling lines, a band at the bottom, the strap handle with vertical stroke to shoulder, flanked by vertical strokes, two angled strokes below, the shoulder with two pairs of concentric circles on each side and a set of horizontal lines below. cypriot

A serving mallet is a tool to worm, parcel and serve a line and is to apply to the standing rigging multi-layered protection against chafe and deterioration. It is a technique not usually used on modern small boats but is found extensively on traditionally-rigged sailing ships. Worming, parcelling and serving —referred to collectively as "service"— is traditionally applied only to traditional twisted rope, either natural fibre or steel wire-rope, not the braided line almost exclusively used on modern vessels today. Parcelling means wrapping a rope line in a spiral fashion with long overlapping strips of thin canvas. This is wound from bottom to top, the edge of the progressing strip slightly overlapping the previous wrap to create a shingled effect, to prevent water from entering. Often the strips of the canvas are either saturated with Stockholm tar as they are applied, or painted with tar after the parcelling is complete, immediately before the process of serving. A serving provides an outer layer of protection and is formed by wrapping twine as tightly as possible around the line, each progressive turn of the twine laid as close as possible against the last, covering the rope completely. Following the rhyme above, it should have course run against the lay of the rope; this alternation helps prevent sideways chafe from opening up the protection. Traditionally hemp "marline" was and still is used for servicing on modern small craft with three-strand nylon "seine twine" often used. A serving board or serving mallet can be used to help get the outer twine as tight as possible. Despite the name (arising from its shape) the serving mallet is not used to hit anything, it forms a kind of guide and tensioning lever for applying the twine to the rope. An optional final stage for the permanent protection of "served" rope is to paint the outer layer of twine with a mixture of tar, varnish and black paint. This needs renewing periodically, and going aloft to paint foot ropes, shrouds, stays, and other served rigging is one of the regular maintenance tasks on many tall ships. The tar or "slush" is a mixture of Stockholm tar, boiled linseed oil, and Japan drier. Many "recipes" for slush exist, but the intent is always to allow a penetrating coat of preservative pine tar that then cures to a harder finish that will not so easily rub off on sails and crew. The term "slush" is also used to describe the grease applied to the masts to lubricate the “parallels” so that the yards can raise and lower freely.A tool used by sailors on board sailing ships as an aid in the preservation of ships rigging ropes by wrapping the rope in tar soaked canvas and covering the canvas by wrapping twine along the length of the rope. An item that is significant in that it tells a story of what sailors working lives were like onboard the early sailing ships and how these early vessels were maintained and sailed. Serving Mallet, used in Worming, Parcelling and Serving of rope - cylindrical handle with grooved wooden section attached. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Cypriot White Painted Ware from the Cypro-Archaic PeriodThe interior has a painted black band, the rim with sets of strokes between lines, continuing on twin strap handles, the neck with wavy line, two bands at bottom, the body with two sets of encircling lines and broad band between, set of three narrow bands on lower body. cypriot

Has a strong association with Theo Dunstan Inspector in Ballarat; would have been issued to crews in order operate the tram car doors.Piece of painted, mild steel rod bent at 90 degrees and shaped at longer end to give a square shape for use in external doors on SECV Ballarat Trams - known as a square key. Was used to secure doors in both open and closed positions. Has been painted black.trams, tramways, tramcars, doors, locks, security

This British made type "N1087" and code "N1087" C Ericsson auto flameproof telephone was used in the drum filling platform of the Golden Fleece Depot, in Hovell St., Wodonga. The type "N1087" and code "N1087" C Ericsson flameproof telephone was introduced in 1937 and certified by the British Mines Department as flameproof for Petroleum and Acetone Vapours, in 1938. It was designed specifically for outdoor use in areas where there may be exposure to inflammable vapours and hazardous chemicals such as petroleum. Each contact or switch point is enclosed in its own flameproof chamber, to reduce the risk of ignition and the volume of gas.The Ericsson auto flameproof telephone has local significance due to its use in the Golden Fleece Depot in Wodonga, as well as national and international significance due to its date and the rarity and relatively complete condition.Black Ericsson auto flameproof rotary dial telephone secured in a hinged cast iron case painted black. Rubber tubing connected to the bakelite handset and an adjacent metal plate with the name "Ericsson", type "N1087" and code "N1087 C", and certification of the telephone as flameproof with the letters FLP. "Ericsson" on the top left corner of the metal plate. "AUTO TELEPHONE / TYPE N1087 / CERTIFIED FLAMEPROOF / FOR GROUPS II & III / CERTIFICATE FLP. 2378" / CODE N1087 C" on the main part of the metal plate.ericsson telephones, british telephones, flameproof telephones, mining telephones, golden fleece depot wodonga, wodonga

POSTCARD - picture of Cyanide Works -Agelo and Driefontein G.M. Coys / published by Salio Epstein & Co Durban / black and white photo painted in showing race ways and water wheel / circa 1901Salio Epstein & Co Durbanpostcard, photograph, various themes, southern africa cyanide works angelo driefontein mine industrial / - picture of cyanide works -agelo and driefontein g.m. coys / published by salio epstein & co durban / showing race ways and water wheel / circa 1901

Captain John E D White, Australian Army Training Team in Vietnam (AATTV) took over command of 11 Mobile Strike Force (Mike Force) Company in Da Nang, Vietnam, in February 1968. He was 26 years old. The 2 NVA Division was moving from Laos into South Vietnam and his mission was to establish contact with the division and trace its movements south. In mid-March the company was air lifted to the Special Forces camp of Kham Duc, near the Laotian border. They used an old French Foreign Legion fort as a temporary base from which patrols could be sent out. White called it Ngok Tavak after a nearby mountain. Initially, patrols failed to find the enemy, but in late April a patrol clashed with the enemy. At the same time, White received intelligence that the NVA division was closing in. At night they could hear explosions in the distance heading toward them. White decided their best chance was to leave the fort and take to the jungle to adopt guerrilla tactics. However, in the meantime a platoon of United States Marine Corps artillery arrived bringing with them two howitzers and a stockpile of ammunition. To abandon the fort was to abandon the guns. White contacted Da Nang, explaining the predicament, and was ordered to remain where he was. A Civilian Irregular Defense Group (CIDG) platoon was sent to reinforce his numbers. This was a para military force comprised mainly of indigenous highlanders, trained by United States Special Forces. They also brought with them two mortars and their crews. At 3.15am on 10 May 1968 some members of the CIDG chose to assist the NVA to attack the fort instead of supporting Mike Force, and close hand to hand fighting followed, along with grenade attacks and heavy machine gun fire. Air support offered a brief respite from the NVA attack, and some NVA forces were pushed back outside the perimeter by counter attacks, but at 9am White contacted Da Nang to advise that his position was untenable. A second attack was imminent and they could not withstand it, so they would have to withdraw. The wounded were evacuated by helicopter (under orders from Major Mai, the NVA had not attacked the previous medical helicopters that collected the wounded under the cover of air strikes) and at 1pm the rest of the force evacuated east, into the jungle. The NVA did not notice their withdrawal, and continued mortar attacks on the fort for another ninety minutes. Seven kilometres from the fort White called for a helicopter withdrawal of his forces. The force was successfully lifted to Kham Duc and then Da Nang. (Credit AWM)A wooden shield painted grey/black celebrating the 40th Anniversary of the Battle of Ngok Tavak. There are three messages from mates written in black on the back. The shield was presented to Capt John (Jed) White.Presented to Captain John White, AATTV from the men of the Mobile Strike Force, Danang, Vietnam, 1968.mobile strike force, capt john (jed) white, shield, battle of ngok tavak

Newcombe and Co traded as timber merchants And iron mongers in Koroit Street in the later part of the 19th century and early 20th century. It was destroyed by fire in March 1918.A commonly used office item which is well linked to a long established business in Warrnambool.Cast iron rectangular base with arch form leading to handle. Painted black and decorated with gold scroll work. Orange line around rectangular base. The seal is operated by pushing down the handle which stamps on paper which would be placed between the circular stamp and the base plate.warrnambool, company seal, embossing seal, newcombe timber company, koroit street

Note printed at lower edge of poster - "These colour patches identified units and formations of the Australian Army which fought during World War 1. They are reproduced for ANZAC Day 1981 as a tribute to the soldiers who wore them".Poster - paper, colour ink print of 250 colour patches of the Australian Army, Worl War One. Reproduced from the "Supplement to 'The Weekly Times' April 5, 1919" Heading to poster "THE GREAT WAR/1914 - 1918" beside Rising Sun badge framed by crossed flags (Red, White and Blue) with laurel leaves and lettering "COLOUR PATCHES". Frame - black colour paint on timber frame with glass front and cardboard backing. Mount - white colour cardboard.Information on poster in purple colour print "THE GREAT WAR/ 1914-1918". "With the Compliments of The Herald and Weekly Times Ltd". "DISTINGUISHING BADGES OF THE AUSTRALIAN IMPERIAL FORCE".framed accessories, poster, ww1, colour patches

Based on the attached note "Experimental run number plate used by MMTB 1930/31 to decide if white on black or black on white should be used". Such plates are used by depots to indicate to Inspectors and other staff the allocated run or timetable trip for a particular service. Based on the note, used as a development item to be used on trams.Run Number steel sheet with corners trimmed and rounded, two holes for hanging, with an off-white background and the letter "E" and number "9" painted in black. Has a part of a tag with notes wire to the item.See image 2.tramways, timetables, mmtb, essendon depot, run number plates

Poison Gas was used extensively throughout WW1.1. This is a pocket sized tin painted black. Inside is divided into a large and small compartment. There is an engraved instruction plate inside the lid. The inside is not painted. There is a simple sliding mini bolt on the outside that keps lid shut. The rear side of the lid is hinged. 2. Is the instruction plate. The glue has failed.passchendaele barracks trust, ww1, accessory, container

Mortlake Waterworks Trust – 18 May 1915 to 1 July 1984 Mortlake Waterworks Trust was constituted on 18 May 1915 following application by the Shire of Mortlake to carry out works for the supply of water to the township of Mortlake. The Trust was abolished on 1 July 1984 under the Water and Sewerage Authorities (Restructuring) Act 1983 when authority was transferred to the Mortlake Water Board. A cast iron seal press. This was used by Mortlake Waterworks Trust to emboss agreements and official documents. Die is still attached to the press. It reads: Mortlake Waterworks Trust 1915. Small metal machine painted black , decorated gold . Dies are attached with the seal of Mortlake Waterworks Trust . Paper is placed between the dies, the handle depressed and the seal embossed on the paper under pressure as a blind (inkless) embossing. The seal consists of two circles with the wording "Mortlake Waterworks Trust 1915". Mortlake Waterworks Trust 1915mortlake, public administration, water supply, amalgamations

"Tarrengower Times" model truck registration plate TLJ 10. Flat tray, spoked wheels with pneumatic tyres, leaf springs front and rear, leather upholstery. "Century" battery behind cabin with" Century" in black on gold. Painted maroon with gold trim, gold painted headlights and radiator frame.On driver's door in gold lettering "The / Tarrengower / Times /High St. / Maldon / Est. 1858" Logo on oval plate at top of radiator.transport commercial model

Wooden trophy constructed od 2 pieces of timber painted black and a bangalore torpedo tip on the right hand side. On the base of the plaque is an engraved brass plaque. On the verticle piece of timber is 11 black rectanglur plaques, none of which have been enscribed as it appears the trophy was never awarded.Bangalore Torpedo Tip Award

Alfred Wayne & Co. produced a number of braille writers over the years, including The Visible. Alfred Wayne (1854-1926) was listed as a 'manufacturer of small novelties in metal and steel' in the 1901, however by the 1911 census he had turned his company into a 'manufacturer of apparatus for use of the blind'. Together with Henry Stainsbury, they produced a number of braille typewriters as well as the more well know crab design of the Stainsby-Wayne brailler.Cast iron Brailler. The body of the Braille writer is painted in black with silver and gold painted inscriptions. Seven metal oval keys are situated at the front of the machine. The roller for turning the paper is made from turned wood.Marked: Painted on front of machine: "The visible/manufactured by/Alfred Wayne/Handsworth/Brimingham. Englandbraille equipment, assistive devices

Print of a poster for race meeting " AIF Race Meeting" to be held on the New Flemington Track, Barbara near Gaza dated Saturday Sept 7th, 1940. NB: this is a second display of same print. Print of poster - black print on white background. Frame - timber, painted black colour. Glass front.On back of frame, on adhesive label, handwritten red ink. ON LOAN TO / BENDIGO RSL, AS LONG AS THEY/ WANT IT./ TO BE RETURNED/ IF DISPLAY OF PRINT NOT IN USE/ TO / N.S. FULLERTON/ 18 BOSQUET/ WHITE HILLS / OWNER.framed print, history, ww2, army

Scales such as these were used to measure commercial quantities possibly grains and farm produce for quite large amounts of product.Bags of the product would have been hooked up and weighed. Salter has been a name long associated with weights and measures. Salters had their beginnings in England in the 1760's with a background in springs which are a main component of many scales. The actual mechanism for weighing objects in such scales has remained similar for over two centuries.These scales would have been a common item in most commercial operations which bought and sold items in bulk and have historical and scientific significance.Cast iron frame with circular brass face painted black.. There is a round metal ring at the top which runs through a circular metal section of the frame. A hook is attached to the bottom of the frame through a similar metal circle. The brass face has graduated markings in 1 lbs increments up to 150 lbs. On top section of scale face:Salter's Spring Balance. British Made. On lower section of scales face:To weigh 150 lb. Salter trademark of rope and anchor. warrnambool, salter scales, commercial scales, spring balance scales

This hat box could have been used for either a man’s or a woman’s hat in the days when it was the custom for both men and women to wear a hat when outside the house or on social occasions. It would have been used in the home or for travel, especially when on board a ship. Hat boxes today may still be used but are usually made of cardboard or other less durable material.This box was acquired over 40 years ago from a local person. It is retained for display purposes.This is a round metal box with a circular base and a lid affixed with a metal hinge. The lid is wider at the front of the tin allowing for extra height for the stored item. The lid had a metal clip handle and there is a front metal clip for closing the box. The tin has been painted black but is much rusted, particularly on the top section. vintage headgear, history of warrnambool

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, distant signal, signal, maritime signal, ball signal, signal shape, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal ball, day signal ball, ball signal, ball day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.distant signal, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

The family of Mrs Nancy Maggs were early settlers in Moorabbin ShireCirca 1940/1950. Child's small tin-plate toy sewing machine. The body of the sewing machine is painted black with red and gold floral decoration - some loss of paintwork. The flywheel is cast, with a wooden handle. Some workings are made of steel. The manufacture is such that the machine could actually be used for sewing small articles. toys, sewing machines, early settlers, pioneers, moorabbin, bentleigh, cheltenham, ormond, market gardeners, maggs nancy, maggs geoff, f

Kerosene Lamp for a bike. Tin rectangular shape painted black. Silver round edging surrounding a glass lens. Protruding from the side is a small triangular shape with a red lens facing back. Also at the back is spring bracket used for mounting the lamp on the bike. One side also has a regulator dial. bike, bicycle, lamp

Plaque been presented to Brigadier Lowen, Brig Lowen served in 2/5 Australian Infantry Battalion in WWIIPart of a donation of items owned by Brigadier Lowen Shield shaped wooden plaque, constructed of pine with light coloured stain. affixed in front of the base is a smaller shield painted black with a gold bevelled edge. this shield has a silver horn hanging from a bow. This shield is placed above a gold painred scolled banner that has the words " THE LIGHT INFANTY" written on it THE LIGHT INFANTRY5/6 rvr, brig lowen, 2/5th bn, bhq, plaque