Showing 1950 items
matching tests
-
City of Greater Bendigo - Civic CollectionInstrument - Weights and Measures, Troy Weight Set, c 1865
Troy weight is a system of units of mass from an unknown origin. While the name Troi is believed to have come from Troyes in the north east of France the system used primarily in the precious metals industry and adopted in Australia originated in 15th century England. Troy weight units are the 'grain' and 'pennyweight' (24 grains), the troy ounce (20 pennyweights), and the troy pound (12 troy ounces). One troy ounce equals 31.1034768 grams. The troy ounce and grain were also part of the apothecaries' system and was long used in medicine, but has now been largely replaced by the metric system (milligrams). When the Weights and Measures Act was passed in Victoria in 1862 local inspectors were established throughout the colony to ensure accuracy particularly in the weighing of gold. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses. This set would have been de commissioned some time after 1947 and was offered back to the Borough of Eaglehawk in 1989. Hinged, lockable wooden box with brass handle, hinges, latches and lock. Remnant wax on front face of box above and below lock. Interior of box is lined with purple velvet which is worn in several places. Box houses nine troy weights ranging in size from 100oz Troy to 2oz Troy. 1oz Troy is missing. Accompanying set is a two page letter from Weights and Measures Branch of Consumer Affairs offering set back to the Borough of Eaglehawk in 1989. Troy Weights: Part a) 100oz Weight, 68 mm Diameter at base x 113 mm H b) 50 oz Weight, 53 mm D x 90 mm H c) 30 oz Weight, 45 mm D x 77 mm H d) 20 oz Weight, 39 mm D x 65 mm H e) 16 oz Weight, 37 mm D x 60 mm H f) 8 oz Weight, 30 mm D x 47 mm H g) 4 oz Weight, 24mm D x 36 mm H h) 2 oz Weight, 19mm D x 28 mm H i) 1oz missing Hinged Wooden Box: Part j)171 mm H x 300mm W x 196 mm D Typed two page letter: Part k) 295 mm H x 210 mm W x 1 mm Top Troy: Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD. Side Troy : Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD above a series of date stamps recording every time the weight was tested. Date stamps: 30.4.1866; 16.9.81, 30 12.86; 1.2.92; 10.5.97; 15.1.04; 10.2.09; 17.12.14; 20.4.20; 29.9.25; 23.1.31; 18.6.36; 14.7.41: 11.7.47 Exterior Top of Box: Remnant of paper pasted to wood. Faint printed text 'ON HIS MAJESTY'S SERVICE'.borough of eaglehawk, making a nation exhibition, city of greater bendigo commerce -
Ballarat Tramway MuseumEphemera - Ticket, Australian Electric Traction Association (AETA), AETA Geelong Tram Tour, Mar. 1948
Ticket for an Australian Electric Traction Association tram tour - Geelong Tram Tour, 29 March 1948. C. L. Busch Secretary, L. Marshal Wood - President. On the rear is an advert for "Coles & Garrard Pty Ltd", sight testing, opticians, giving both the Melbourne and Geelong address. Printed in black on grey card.trams, tramways, aeta, tours, ticket, geelong -
Ballarat Tramway MuseumPhotograph - Black & White Photograph/s, Geoff Grant, 19/06/1955 12:00:00 AM
Black & white photo of side view of M&MTB tram No. 988, testing overhead in Clifton Hill area on 19 June 1955. Part of bus 564 visible behind tram. Tram has both doors open, with M&MTB crest and number on saloon ends of the car rather than the centre panel.On typed paper on rear "988 side view at Clifton Hill 19 June 1955" and in btm rh corner "Geoff Grant" stamp.trams, tramways, melbourne, bourke st., commissioning , tram 988 -
Ballarat Tramway MuseumPhotograph - Black & White Photograph/s, Geoff Grant, 19/06/1955 12:00:00 AM
Black & white photo of M&MTB tram No. 988 testing overhead on Bourke St. at intersection of Russell St. on Sunday, 19 June 1955, with tower wagon on right side and AEC bus (Reg. No. AT 064) on left hand side. Tram does not have a destination roll. See also Reg Item 1607On rear on typed paper, "The first pass type tram down Bourke St. on the 19 of June 1995. The car is pictured here standing at the Russel St. crossover" and "Geoff Grant" stamp in btm rh cnr.trams, tramways, melbourne, bourke st., first tram , tram 988 -
Ballarat Tramway MuseumBook, Australian Commonwealth Engineering Standards Association, "Electrical Performance of Traction Motors - Direct Current Series Wound", 1925
Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard C.2 - 1925, "Electrical Performance of Traction Motors - Direct Current Series Wound". Dated Dec. 1925. Provides an index and information about enclosures, ratings, testing and information to be supplied.On top right hand corner has stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" and date "17 April 1934".trams, tramways, tramways, electrical equipment, motors -
Kew Historical Society IncBadge - Souvenir Button, Geary, 1928-1929
Frances Rigg was a local business identity in Kew, at one stage managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and medallions was inherited by his son, Ken Rigg (1922-2014). The collection was subsequently donated to the Kew Historical Society in 2015 by Francis' grandson, Adrian Rigg, at the time of the Gallipoli & Beyond Commemoration in 2015. The collection covers a period of almost 40 years. The majority of the buttons are patriotic buttons, issued and sold during and immediately after the First World World War (1914-1918) to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.Patriotic and other pressed tin buttons and badges were produced in large numbers in the first decades of the twentieth century. By nature, insubstantial and ephemeral, they have not always survived. The collections of badges, buttons and medallions in the Kew Historical Society collection is homogenous and yet diverse, ranging from buttons sold to raise funds for the war efforts in 1914-18 and 1939-45, to those used at festivals and sporting events. Because of the manufacturing process, many surviving buttons and badges have been affected by inadequate storage, suffering from oxidisation and physical damage. These survivors are now historically and socially significant artefacts, revealing much about the attitudes and values of the period in which they were produced. Their widespread distribution means that they are frequently significant at a local, state, national and international level.A tin buttonhole button from a series of 16 badges issued by Amalgamated Press. George Geary (1893-1981) was an English Cricketer who played in a number of tests against Australia including the 1928-29 tour. The button includes a tab which states ‘Bend Me’ which was a simple method of attaching the badge to a lapel."Geary"george geary, cricket, test cricket -
Melbourne Tram MuseumEphemera - Ticket, Australian Electric Traction Association (AETA), Ticket for an Australian Electric Traction Association tram tour - Geelong Tram Tour, Mar. 1948
Ticket for an Australian Electric Traction Association tram tour - Geelong Tram Tour, 29 March 1948. C. L. Busch Secretary, L. Marshal Wood - President. On the rear is an advert for "Coles & Garrard Pty Ltd", sight testing, opticians, giving both the Melbourne and Geelong address. Printed in black on grey card.trams, tramways, aeta, tours, ticket, geelong -
Kiewa Valley Historical SocietyPlaques - Awards
1. The Good Friday Appeal is held annually in Victoria with proceeds being raised for the Royal Children's Hospital. 2. Yamaha, a Japanese Company, encouraged Australian businesses to use their products. In this case the Snowmobile.The Kiewa Valley took part in the Good Friday Appeal and Yamahs snowmobiles were used at Falls Creek. 1. Blue metal plaque with holes in each corner and pale blue print informing details of Award . There is a thin gold line around the circumference. 2. Gold metal plaque with holes in each corner and black print informing details of the award.Includes: 1. Good Friday Appeal / Royal Children's Hospital Service Award. 2. Presented to F.C.T.A.M.C by Yamaha Motor Company, Japan. and Milledge Bros. Melbourne re Yamaha / Snowmobile / testing team / July 1972good friday appeal, royal children's hospital, yamaha co. japan, snowmobile falls creek -
Kew Historical Society IncLeisure object - Board game, Test Match: A fascinating cricket game, 1955
'Test Cricket' was one of the most popular board games in the pre television era. John Sands Pty Ltd, the publisher, was an Australian bookseller and stationer founded in 1837 and produced board games from 1929-78.Board game consisting of a rectangular cardboard piece illustrated with a cricket ground, players and a scoreboard. Two semi-circles have been cut away from the background and are used to control the progress of the game. The right hand game control is moved to 'ball' position (1-8) and back to start which indicates the type of delivery shown in the window. The left hand control is moved to 'type of delivery bowled' and back to the start which reveals the number of runs scored or method of dismissal which is shown in the window. The scoreboard is operated by three circular wheels that show the result of runs and wickets. An oval handle is at the upper centre. The packaging includes a green cardboard box with lid, which has an image of a batsman and a red cricket ball.board games, john sands pty ltd, cricket -
Melbourne Tram MuseumDocument - Combino Plus, Yarra Trams, "C008 - Network Testing", 2007
Document provides information on testing the C008, the Combino plus demonstrator that ran from Malvern depot during 2007 - see reference for details. Prepared prior to entering service to check clearances and other engineering issues.Demonstrates a report about the commissioning of a new tram.Single A4 sheet, printed - has been folded.trams, tram c008, combino plus, testing, commissioning -
National Vietnam Veterans Museum (NVVM)Pamphlet, Cac Ban Chien Si Ben Kia Chien Tuyen Hay Chu Y - Attention Soldiers on the other side of the Battle Lines
Cac Ban Chien Si Ben Kia Chien Tuyen Hay Chu Y - Attention Soldiers on the other side of the Battle Lines. On the reverse there is a photograph of NVA/VC bodies "en Masse" with small test.Photo of NVA/VC bodies en-masse with text in Vietnamese, and on the reverse side the information is also in Vietnamese.pamphlet, psycological warfare, propaganda, nva/vc, viet cong, 7th battalion, 1st battalion, the royal australian regiment, terry michael collie, 2790361 -
Bendigo Military Museumdocument - TEMPORARY DRIVERS LICENCE - ARMY, 1 Aust Tank Bn, 1944
See Cats 2481.2 and 5556.2.This is a quarto size, single sheet of paper. It has the printed letterhead of "Aust Mil Forces - New Guinea Force HQ". Dated 16 Mar 44. By 1 Aust Tk Bn. Rear detachment. Handwritten is a certificate that he has passed tests for A.'3B' licence. Signed by BROWNE LIEUT T.O. 1Aust Tank Bn (AIF).ww2, driving licence -
J. Ward Museum ComplexInstrument - Electrocardiograph Machine - Cardiotrace Heat Mark II, circa 1920
With the advent of electricity, so to came the invention of the Electrocardiograph Machine. This piece of medical equipment gave nursing staff and doctors a more precise indication of a patients heart beat and was used extensively across Victoria's medical institutions. The equipment is significant because it is a fully intact example of diagnostic equipment used in a mental health hospital in Victoria Australia.Cardiotrace Electrocardiograph Machine in blue plastic case with black handle. Contains: Electric cord Cords to link electrodes Graph paper to measure heart beats Instruments on panel marked 'stylus heat', 'off', 'run', 'position', 'test', 'record', '1', '2', '3', 'aVR', 'aVL', 'aVP', 'V', '1/2V', 'lmV', marker.Manufacturer: Medical Instrument Co. Pty. Ltd. Distributor: Watson Victor Limited Serial No: 3362 Cardiotrace Heat Mark III Electrocardiograph/Voltage 220-240 A/C /Frequency 50 cycles per second/Watts 45 serial 3362/Caution: Refer to Manual for full detail.electrocardiograph machine, medical instrument, medicine, health, mental health, ararat mental hospital, j ward -
Federation University Historical CollectionBook - Scientific Instument, Valve Characteristic Meter, c1960
The test rig is contained in a metal frame with sloping front panel that contains the indicator and number seting knobs. A pespex lift-up lid coves numerous valve sockets and a set of coding wheels. Both sides and back covered with pespex. Metal surfaces panted hammerton grey. abbreviated working instructions and AVO Valve data manual.Serial Number 1961scientific instrument, ballarat school of mines, valve characteristic meter -
Maffra Sugarbeet MuseumCentrifuge
Owned by Mervin Buckram (of Rochester), used for private use on the farm at Mewburn Park. Used approx 1940s.An important survivor from the early dairy industry. Maffra has always held a leading role in Herd testing, so it has considerable community significance. An earlier example is held at Stratford, with another, between the two, and less intact, at Old Gippstown.A round, black herd-testing centrifuge with a flat top and bottom. It has a hinged flap that opens and stands on three legs. There is a smaller round piece on top of the centrifuge which has a thick cylindrical shaped piece of metal in the centre. An apparatus at the top allows water to be driven through an impeller and there is an internal carrier to hold bottles for centrifuging."Grand prize St. Louise 1904" on side,"Wizard Tester" on top."The creamery package MFG. company Chicago. U.S.A. No. 3785" on brass plaque.herd testing -
Bendigo Historical Society Inc.Postcard - ACC LOCK COLLECTION: B&W PHOTO OF A 6 CAMEL TEAM WITH A GUN CARRIAGE, POSTCARD, 1914-1918
Postcard, WW1, B&W photo of a 6 camel team pulling a gun carriage in a desert landscape. A soldier walking behind the gun carriage and an officer standing at right. Handwritten in ink on the back - Testing Rdrail attachment (10 wheels) in loose sand. Zeitoun Jany'16. (Zeitoun is the NZ army training camp near Cairo)postcard, postcard, ww1, egypt, zeitoun, camels -
Ballarat Tramway MuseumPhotograph - Colour Photograph/s - set of 3, Warren Doubleday, 8/03/2003 12:00:00 AM
Set of three colour photographs of testing the installation of screw spikes in the depot trackwork prior to the Wendouree Parade trackwork. Photos taken on 8/3/2003, printed on AGFA paper. 2554.1 - Gary Wood, John Shaw and Alan Snowball as a group. 2554.2 - Screwing a spike in with motorised impact tool. 2554.3 - Using an electric impact tool.trackwork, screw spikes, depot fan -
Maldon Vintage Machinery Museum IncProgrammable Calculator, 1978
.1) Hehlett Packard 1978 design programmable calculator. Cream plastic case. Keyboard layout similar to modern computers. .2) Loose leaf file containing operating instructions and two programmable cartridges. .3) & .4) Quick reference guide books, spiral bound. .5) Calculator 9825A system test booklet bound with staples.On small plate on top of projecting power socket "9825A" serial No.trades, drafting -
Melbourne Tram MuseumDrawing, The Met, Electrical drawings for Z1 and Z2 tramcars, c1995
Black plastic folder with black plastic comb binder containing plasticized drawings for the Z1 and Z2 class tram circuits (45 pages), Z3 tramcars (47 sheets), notes on the CCU Test cards and performance and a list of controller wiring diagrams, for all tramcars and some of the associated drawings. Prepared by the Met Tram Servicing branch. Not dated.trams, tramways, z class, instructions, controllers, electrical engineering, electrical equipment, electrical systems, z3 class -
Melbourne Tram MuseumDocument - Personal Papers, Hugh Waldron, "Trams in Hawthorn Depot 14 Feb 1996", 23/05/2021 12:00:00 AM
Personal Paper - 2 A4 wheets with donation notes, titled "Trams in Hawthorn Depot 14 Feb 1996", listing the tramcar and location. Has notes on the event and why - Metcard testing on Z10. Gives the shift details. Z10 was stationed at the depot. Prepared by Hugh Waldron. Lists the all the trams placed there including the heritage fleet.trams, tramways, hawthorn depot, metcard, testing, heritage fleet, z class -
Melbourne Tram MuseumPamphlet, Siemens, "Combino Plus", 2007
Full colour, A4 size when folded, A2 when unfolded pamphlet titled "Combino Plus" providing information and photographs about the 100% low floor tram that was tested in Melbourne , Lisbon C008, running between March and June 2007. See Reg Item 2610 for a memento of this tram running in Melbourne. Two copies held.trams, tramways, siemens, tramcars, combino -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)Pair of 'Woolwich' nipple shields associated with Dr Ronald McKenzie Rome, Allenbury
Nipple shields will help some babies attach to the breasts, that are otherwise unable to. They are used occasionally with women who have flat or inverted nipples and their baby is unable to attach to the breast. Shields are made of a fine, silicone material that sits over the areola and nipple. (Source: Mater Mother's Hospital, 'Engorgement and Breast milk Oversupply') This item may have come originally from Arthur Wilson's rooms, as Ronald McKenzie Rome was his assistant and junior partner and took over Arthur Wilson's rooms.A pair of clear round plastic nipple shields, each with a top and bottom which fit together by twisting in a clockwise direction. Each shield has a small hole in the top, and a central opening in the bases. Test imprinted around rim reads 'OPEN [two way arrow] CLOSE"; "Woolwich/BREAST SHIELD/PAT NO 635433"; "Allenburys".breast feeding -
Ringwood and District Historical SocietyCertificate, Borough of Ringwood- Municipal Baths. Swimming Certificate c1950's
Swimming Certificate for the Borough of Ringwood Municipal Baths. Proficient in swimming in 66 yards, 200 yards, and 400 yards and 1 mile and Life Saving Tests. Two good B&W pictures of Town Hall and pool.Sample swimming certificate, cardboard, with two B&W pictures on it. At the top is a picture of the old Ringwood Town Hall, and at the bottom a picture of the Ringwood outdoor swimming pool and building. -
Montmorency–Eltham RSL Sub BranchWeapon - Ordnance QF 3-Pounder Naval Gun Shell Case, Naval Gun Shell Case, 1901
Mk II Shell used by the Ordnance QF 3-pounder Vickers (47mm / L50) naval gun first tested in 1903. It was used on Royal Navy warships. Effective firing range was 2000 yards (1829m) approx.Brass naval gun shell case.II C V S & M 2 - 8 - 01 -
Flagstaff Hill Maritime Museum and VillageFunctional object - Jug, Between 1910 -1936
The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995.An example of a brass measuring jug made specifically to maintain government standard liquid measurements that were sold to the public. The probability is that this artefact was made sometime between George V reign (1910-1936) and gives us today a snapshot of how imperial weights and measures were checked by Government departments prior to decimalisation and how a standard for the various types of measurement was developed in Australian based on the Imperial British measurement system. The container has social significance as an item used in Victoria as a legal standard measure to ensure that goods sold in Victoria were correct. Jug brass haystack form with a deep lip and pouring spout, small neck and broad base. It displays a curved pistol handle. Inscription at base of handle top of jug stamped 61 GVR SM. These marks signify that the measure complied with the Victorian Government capacity liquid standard measurement. Item made during the reign of George V (1910-1936 (GVR).Other marks indicate model number (61) & SM possible could be either small measure, the maker, or Standards Melbourne.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and VillageEquipment - Galvanised Jug, 1930s
The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995.An example of a galvanised measuring jug made specifically to maintain government standard liquid measurements that were sold to the public. The probability is that this artifact was made around the first quarter of the 20th century and gives us today a snapshot of how imperial weights and measures were used before decimalisation and how a standard of measurement for merchants was developed in Australian based on the Imperial British measurement system. The container has social significance as an item used in Victoria as a legal standard measure to ensure that goods sold in Victoria were correct given the item is galvanised it was probability used for kerosene or petrol etc not for liquids used for human consumption. Jug conical shaped with rounded top coming to a very slight point wide handle at back. VIB.L.66 1/2 Gall capacity unsure of the markings 66 could mean the model number capacity is 1/2 an imperial gallon VIB.L markings not known possibly a company or Victorian Department that the jug was made for and no longer active.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and VillageGalvanised Jug
The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995. An example of a galvanised measuring jug made specifically to maintain government standard liquid measurements that were sold to the public. The probability is that this artifact was made around the first quarter of the 20th century and gives us today a snapshot of how imperial weights and measures were used before decimalisation and how a standard of measurement for merchants was developed in Australian based on the Imperial British measurement system. The container has social significance as an item used in Victoria as a legal standard measure to ensure that goods sold in Victoria were correct given the item is galvanised it was probability used for kerosene or petrol etc not for liquids used for human consumption. Galvanised Iron jug with rounded top, Inscription on handle at back. 2 gallon GV.35flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and VillageFunctional object - Galvanised Jug
The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995.An example of a galvanised measuring jug made specifically to maintain government standard liquid measurements that were sold to the public. The probability is that this artifact was made around the first quarter of the 20th century and gives us today a snapshot of how imperial weights and measures were used before decimalisation and how a standard of measurement for merchants was developed in Australian based on the Imperial British measurement system. The container has social significance as an item used in Victoria as a legal standard measure to ensure that goods sold in Victoria were correct given the item is galvanised it was probability used for kerosene or petrol etc not for liquids used for human consumption. Jug galvanised conical shaped with rounded top, handle at back. 3 gallon GV.27flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and VillageEquipment - Jug
The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995.An example of a galvanised measuring jug made specifically to maintain government standard liquid measurements that were sold to the public. The probability is that this artifact was made around the first quarter of the 20th century and gives us today a snapshot of how imperial weights and measures were used before decimalisation and how a standard of measurement for merchants was developed in Australian based on the Imperial British measurement system. The container has social significance as an item used in Victoria as a legal standard measure to ensure that goods sold in Victoria were correct. Jug conical shaped with rounded top coming to a very slight point wide handle at back. VIB.L.66 1/2 Gall capacityflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Federation University Historical CollectionAnnual Report, Ballarat School of Mines Annual Report, 1970
The Ballarat School of Mines was founded in 1970 and was the first institution of formal technical education in Australia. 1970 marked the centenary of the School and that of technical Education in Australia. A centenary commitee was established to plan activities and projecty sot celebrate the occasion. These included five centenary lectures fro secondary school students, a film of the School to be made and shown on National Television, a centenary medallion centenary posters, a dinner for local organisations with Council and staff as hosts, an historical notebook on the school, a plaque mounted to mark the site of the original school, opening of the Mt Helen Campus, Relocating the Old SMB battery ot mt Helen, student reunion, Art display of present and former students, Mt Helen Open Days and distribution of car stickers. A Centenary Appeal was established to finance a Great Hall and Sports Centre at the Mt Helen Campus. The Appeal President was Cr W.J.C. North. The materials testing laboratory secured and retained registration by the National Association of Testing Authorities for a range of tests on concrete and metals. The student accommodation at Mt Helen 23 Page report (with supplementary finances) in a soft cover showing a picture of the Former Ballarat Circuit Courthouse which was used as the first building of the Ballarat School of Mines. The report includes a page of stamps produced to commemorate the centenary of Technical Education in Australia through the Ballarat School of Mines. The report was presented by Council President Morgan Bevan John. The report includes information on the new campus for the Tertiary Division at Mt Helen, including information on the buildings being constructed by local builders. The site plan was developed by G.J. Harrison and L.H. Vernon and Associates. The following staff resigned: E.R. McGrath (deceased), E.W. Ryan, I.L. Hunter. The following new appointments were made: R.l. Martin, G.K. Tampi, T.F. Norwood, K.M. Llewellyn, M.J. Evans, J.F. Clark, K.G. Millar, B.R. Rollins, L.G. Shome, C.I. Dowling, M.H. Pitfield, G.M. Pearson, J.P. Murray, J.R. Thyer. Page 10 lists diplomas awarded and page 11 lists scholarships and prizes including the Ballarat has Company Scholarship, the Josephine Brelaz Scholarship, The Frank Pinkerton Scholarship, The Mica Smith/Serjeant/Ironworkers Scholarship, Martha Pinkerton Scholarship, Ballarat City Council Scholarship, Junior Art Scholarship, C.R.A. Scholarship, B.H.P. Scholarship, S.E.C. Scholarship, Alexander Rushal Scholarship, Russell and Shirley Evans Scholarship. The R.W. Richards Medal for 1969 was awarded to Peter Hensley. A new I.C.L. 1901A computer and associated equipment was purchased for the Computer Centre. Page 15 has information on the Victorian Institute of Colleges (VIC). Governor of Victoria, Sir Rohan Delacombe, with VIC's Dr Philip Law visited the Ballarat School of Mines and inspected both the old and new facilities. ballarat school of mines, m.b. john, centenary, anniversary
