McColl Rankin & Stanistreet Deborah Extended Gold Mining CO. NL. An agreement to be able to mine in Western Australia between: Deborah Extended Gold Mining Co. NL, Lefroy Minerals Limited, in the areas of: Coolgardie Goldfield, Mt Walton Claims, Jaurdi Claims. Dated 20th November 1970. On page 14, Lefroy Common Seal and signatures of Director: B Miller, Secretary: ? Houlson. Common Seal of North Deborah Mining Company and Signatures of Director: B Miller, Secretary: ? Houlson. Common Seal of Deborah Extended Gold Mining Company No Liability Director: C Manice, Secretary: D ?organization, mining, deborah extended gold mining co nl, mccoll rankin & stanistreet deborah extended gold mining co. nl. an agreement to be able to mine in western australia between: deborah extended gold mining co. nl, lefroy minerals limited coolgardie goldfield, mt walton claims, jaurdi claims

Documents. Bank statements from the Australia and New Zealand Bank Limited. Bound together with a black paper clip.McColl, Rankin & Stanistreetorganization, business, north deborah mine, mccoll, rankin & stanistreet, north deborah mc n/l, gold mining, bank statements

Document. Black cardboard folder containing Dividend Accounts at the Australia and New Zealand Bank Limited.McColl, Rankin & Stanistreetorganization, business, north deborah mine, mccoll, rankin & stanistreet. north deborah gmc n/l, dividend accounts, australlia and new zealand bank limited

Document. Blue/gray cloth covered pass book. Labek on the front: Dividend A/c Central Nell Gwynne GM Coy in accou;nt current with The Scottish & Sustralian Bank Limited.McColl, Rankin & Stanistreetorganization, business, central nell gwynne, mccoll, rankin & stanistreet, central nell gwynne gmc n l, the english scottish & australian bank limited, gold mining, pass book

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]Palmer's diathermy forceps. It has two pronds for grasping that retracts with a screw mechanism. Purchased by Geoff Bishop as an additional part of original laparoscopy set, also included in this accession 1999005.laparoscopy, tubal ligation, infertility investigation

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]This Spackman's cannula was used by Dr Geoff Bishop during gynaecological laparscopioc surgery.He used this decice as a uterine elevator. Also, for testing tubal patency by inserting dye through it. Manufacturers stamp: ANAX.laparoscopy, tubal ligation, infertility investigation

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]This cannula has two points for tubal attachments at one end. At yhe other end, a bell cap with a nossel.This was used by Dr Geoff Bishop during gynaecological laparscopioc surgery. This instrument is commonly used for suction. Also, for testing tubal patency by inserting dye through it. Manufacturers stamp: PRECIOUS.laparoscopy, tubal ligation, infertility investigation

Tobacco industry. Container for 1 oz. loose cut tobacco. Limited no. tins produced. . Early 20th century tobacco manufacture. Donated by Tobacco Company of Victoria Ltd.Limited edition tobacco tin which contained blend of Australian and overseas tobaccos. Small metal tin, 1 oz., with red and cream lid: Champion Highest Grade Cut Tobacco. Gladiator trademark in centre on top of lid. Manufactured by British Australasian Tobacco Co. Pty.Ltd. Sydney AustraliaPrinted on inside lid: "As the issue of this tin will be limited, smokers of CHAMPION TOBACCO should retain it as a holder for the contents of their 1 oz. packets.champion brand, tobacco industry, tobacco tins

Large rectangular sepia print of the beach and beach front at Scheveningen. Among other beachfront buildings it features the famous Kurhaus Hotel and walkers on the sandy beach at what appears to be low tide. The sky is filled with dark glowering clouds. There are no swimmers apart from seagulls. The print has been professionally framed and has a strong wire at the back.Scheveningen Beach. The Hague. Netherlands. 1998. There is also an indistinguishable signature and the mark 25/100. The latter indicates this is no.25 in a limited edition of 100.

Framed Document outlines History of Australian Involvement in Vietnam. In lower left corner is a Plaque "Vietnam Limited Edition No 3 of 2500". In right hand corner is the RAEME Cap Badgevietnam, phil walden, framed document, raeme

Professor Arthur Barrington (Barry) Baker was the first Australian anaesthetist to gain a DPhil in anaesthesia. He completed his DPhil at Oxford University at the Nuffield Department of Anesthesia in 1971, titled, Physiological Responses to Artificial Ventilation. The Waveform Ventilator is the machine developed to illustrate his DPhil. The waveform ventilator was used in several scientific studies on 'the effects of varying inspiratory flow waveforms and time in intermittent positive pressure ventilation (IPPV)', published in the 'British Journal of Anaesthesia'. Professor Arthur Barrington Baker had an extensive career in research and clinical practice including holding the position as the Nuffield Professor of Anaesthetics at Sydney university (1992 - 2005) and also as the Dean of the Australian and New Zealand College of Anaesthetists (ANZCA) (1987-1990).The variable waveform ventilator is of national significance, due to its association with Professor Arthur Barrington Baker (Prof. Baker) the first Australian academic anaesthetist, and the representation of historical social themes and research and design, in anaesthesia. Historic significance – It is a rare type of ventilator in good condition and well provenanced. It is a tangible record of the beginning of the long established and distinguished career of Prof. Baker, the first anaesthetist in Australia to gain a DPhil. Prof Baker has a strong involvement in the Australian and New Zealand College of Anaesthetists (ANZCA) organisation. The object is a product of Prof Baker’s Doctorate of Philosophy (DPhil) on respiratory physiology and is associated with the prestigious Oxford University and the well-known Nuffield Department of Anaesthetics. It also represents the social theme of migration to England from Australia in the 1960s and 1970s to access and experience academic and artistic opportunities limited in Australia at the time. Scientific Value – The object is of scientific value as it offers major potential for education and interpretation in anaesthesia. Although ventilators are common equipment, this specific design and construct prototype is one of a kind, designed and used specifically for research purposes. A rectangular shaped object on a trolley with four wheels. The top half of the object consists of two panels, one of cream coloured painted wood, the other black plastic, both containing several dials of different shapes and sizes. The wood surface also contains several gauges and a safety pressure clear plastic box. The plastic surface also contains a pin board. The bottom half of the object consists of two shelves. The whole object's perimeter is lined with perforated metals. The top wooden surface has several metal pieces of equipment and a long tube. The rear of the object contains numerous types of tubing and wire, a gas cylinder and two leather straps with buckles. The bottom half of one side of the objects has 3 electrical power outlets.Waveform Generator, Drs Colliss N Cowie, Dr Baker Dr Murray Willson, Dr Babbington, Safety Pressure, Error POS F/B, Position, Feedback, Set Balance, Reset, Full Stroke, Velocity, Converter Current, line Pressure, Low Pressure, Bias Pressure, Start, Stop, Stop, Reset Press, Max Press, W/G Output, A/CRO B/2.baker, arthur barrington, baker, barry, professor, academic anaesthetist, oxford university, nuffield department of anaesthesia

Dr. Dai Davies presented this Goblet as a gift to the Faculty as the first appointed Burnell-Jose visiting Professor, Postgraduate Committee in Medicine, S.A. May - June 1976. At the time, Dr Davies was the Consultant Anaesthetist St George's Hospital, London and during this event was elected to Honorary Fellowship of the Faculty of Anaesthestists, Royal Australasian College of Surgeons. The Burnell-Jose Visiting Professorship commenced in Adelaide in 1975 in honor of Mary Burnell, the first woman Dean of the Faculty from 1966 to 1967 and the first woman President of the Australian Society of Anaesthetists in 1955. Very few women had assumed major anesthesia roles in the world during this period. The Goblet's provenance is supported by an original booklet, which certifies its origin from Chichester Cathedral (1075), Sussex, England. In 1975, a limited edition of 600 goblets were commissioned by the Dean and Chapter of Chichester Cathedral, Reverend Walter Hussey, to commemorate the ninth century of the Foundation. This Goblet is number 46 of the edition and the booklet is signed by Walter Hussey. The Goblet is historically associated with Chichester Cathedral and Walter Hussey, who was a great patron of the arts during the 1970's.Solid silver, with pure gold overlaying the modeled stem and interior of the cup. Trefoil shaped goblet cup with tapering profile. The stem is supported by a sheaf of wheat and bird design. The goblet came in its own case with a booklet of authenticity. [central base] NUMBER / 46 / OF A LIMITED EDITION / OF 600 MADE BY ORDER OF / THE DEAN AND CHAPTER / TO COMMEMORATE / THE NINTH CENTENARY OF / THE FOUNDATION OF / CHICHESTER CATHEDRAL / IN 1075 / AURUM / DCM [and hallmarks of the Worshipful Company of Goldsmiths] •[around base] D.M. DAVIES / ADELAIDE 1976dr davies, dai, burnell, mary, chichester cathedral, burnell-jose visiting professor, murphy, desmond-clen, hussey, walter, ninth century of the foundation of chichester cathedral

Used by pilots during WWIIPilot's Notes for Bristol - Hercules V1 Engines in Wellington aircraft.Issue No. 1 February 1943 (M.D. Frecker) These Notes are applicable only to engines running on 100-octane fuel and are complementary to information given in official publications.a22.05

Large Forged Iron embossed belt buckle.B-24 LIBERATOR, 1939-1989, 50th ANNIVERSARY (on front) LIMITED EDITION 50th ANNIVERSARY ISSUE,B-24 LIBERATOR, 1989 BUCKLE CONNECTION, SERIAL 0612 OF 1939. B-24 LIBERATOR Origin: Consolidated Vultee Aircraft Co Type: Long-range bomber with normal crew of 10 History: First flight(xb 24) December 29 1939 Withdraw from service 1955-56 It was built in bigger numbers than any other American aircraft in history and served on every front in WW11 and with15 allied nations.

HistoricThese transmitters were used continually through WWII.Orange large metal casing for transmitter, transport webbing and buckle.Tin containing balloonSIGNAL CORPS U.S ARMY. RADIO TRANSMITTER BC.778.E SERIAL NO.14873, ORDER NO.5896-WF-43, Made By BENDIX AVIATION. LIMITED NORTH HOLLYWOOD CALIFORNIA

0022 Limited edition Vereans Remembered 50 Anniversay Commemorative Plate 1965-2015 Painted plate of Australian soldiers in combat in Vietnam with the words "Initiative Bravery Courage Mateship Sacrifice" around the outside in box with certificate.ON BACK Limited edition plate No.0022. Veterans Remembered 50th Anniversay Commemorative Plate only 1965 made Not for Food Use50th anniversary, commemorative plate

A framed collection of photographs, medals and text. The top left hand corner has eight coloured photographs (slightly faded). Centre top is the Rising Sun badge, to the right of the badge are a further eight faded photographs. Below the Rising Sun badge are the war medals issued to Keith Payne OAM. Below this are two photo's of Warrant Officer Class II Kevin Arthur Wheatley and Major Peter John Badcoe. In the centre is a list of Australian Military And Support Groups. To the right of this list are two photo's, first is Warrant Officer II Rayene Stewart Simpson and the second photo is of Warrant Officer Class II Keith Payne. Below these photo's from left to right are: A map Vietnam, in the centre is the Roll of Honour and to the right is a synopsis of the Vietnam War. A plaque on the bottom "Limited Production No 69/528 Editions.vietnam, roll of honour, wheatley, badcoe, simpson, payne

c.l; Limited Edition number PROOF of 150, c; Ballarat from the Fire Brigade Tower/ (Looking East) 1870/ by Eugene Von Guerard, c.r;; An engraving printed from/Eugene Von Guerards original woodblock/now in the possession of the Ballarat Historical Societywork on paper, print, printmaker, printmaking, australian artist, ballarat, wood engraving, city, town, regional victoria, goldfields

Pump - Billabong Ram Pump Size #5 Based on available historical data, the Australian-made Billabong Hydraulic Ram is one of the oldest rams produced anywhere in the world The Billabong Hydraulic Ram was first introduced into Australia in 1855 by John Danks and Son Limited, John Danks & Son Pty Ltd began as a plumbing business in 1859, established by brothers John and Samuel. It occupied a prominent site in Bourke Street, Melbourne, for 100 years. The business quickly grew to include factories in Melbourne and Sydney which manufactured and supplied a variety of plumbing and engineering products such as brassware, pumps, windmills and bells. The company was registered in Victoria on 25 January 1889 to continue the hardware manufacturing and supply business founded by brothers John and Samuel Danks in 1859. The head office was based in Bourke Street, Melbourne while another branch was established in Sydney in the 1880s. The company had factories in Melbourne and Sydney. The John Danks and Son Limited catalogue published in 1890, listing Billabong Hydraulic Rams as one of its major machinery products. The catalogue also provides reference to the company’s ram experience and manufacture, beginning by stating that in 1890 they already had 35 years of experience with Billabong Hydraulic Rams. The Hydraulic Ram has stood the test of time and it remains one of the few really practical and efficient uses of natural energy today. It operates without almost any cost, will last indefinitely and, with only two moving parts, is simplicity itself. It requires minimum maintenance and minimum replacement of parts. It is not uncommon to find rams working continuously for many years without any attention. • The Rams do not require electricity, fuel or steam to operate. • They possess simplicity of construction and operation – only 2 moving parts. • Powered only by running water. • Require very minimal or almost no maintenance. • Heavy duty cast Iron base and Dome. This Pump recovered from the Clematis Creek in the Mid 1970's Used to pump water from the creek to the Paradise (Clematis) Hotel. Historic - Farm Equipment - Used to pump water from the creek to the Paradise (Clematis) Hotel.Cast Iron Bronze valveBillabong 5billabong, puffing billy, ram pump

No. 127 is a 2'-gauge ex-South African Railways 'NGG16' class Beyer-Garratt locomotive. It was built by Beyer Peacock & Co of Manchester (builder's No.7428 of 1951) to their "Beyer Garratt" patented design of articulated steam locomotive. The South African Railways Class NG G16 2-6-2+2-6-2 of 1937 is a narrow gauge steam locomotive. Between 1937 and 1968, the South African Railways placed 34 Class NG G16 Garratt articulated steam locomotives with a 2-6-2+2-6-2 Double Prairie type wheel arrangement in service on the Avontuur Railway and on the Natal narrow gauge lines - The third order was for a further seven locomotives in 1951, numbered in the range from NG125 to NG131, once again from Beyer, Peacock. These and the subsequent locomotives had welded water and coal bunkers and flat-topped water tanks with rounded top side edges. The Beyer, Peacock locomotives ordered by the SAR, numbers NG109 to NG116 and NG125 to NG131, were shared more or less equally between the Natal and Avontuur lines No. 127 was purchased from the South African Railways by the Emerald Tourist Railway Board for the Puffing Billy Railway in late 2011 / early 2012, together with a container load of spare parts stripped from a derelict NGG16, and prepared for transport to Australia. The spare parts will assist in the restoration of sister NGG16 No.129 in the short term, while No.127 will provide the PBR with the option of restoring a second NGG16 at some future stage, if required. details from http://www.australiansteam.com/BP7428.htmHistoric - Overseas - South African - Narrow Gauge Railways - Steam Locomotive Garratt Steam Locomotive - 2-6-2+2-6-2 Beyer Peacock & Co NGG16 No.127 build No.7428puffing billy, ngg16, sar, beyer peacock & co garratt ngg16 no.127 build no7428, narrow gauge, steam locomotive, garratt

Sectioned steam pump so that the pump workings can be seen. Inscriptions & Markings: Tangye Birmingham, This steam pump was presented by the colonial gas Assn Ltd (brass plaque) The Colonial Gas Association was originally formed in London on 2 February 1888, as The Australasian Gas Association Limited. The primary objective of the company was to provide investment capital to help finance the construction and management of gasworks being established by the London engineering firm John Coates & Co in metropolitan cities and regional towns throughout Australia and New Zealand. By 1890, the Australasian Gas Association had acquired gasworks at Benalla, Shepparton, Wangaratta, Warragul, Maldon and Seymour, and had constructed a large gasworks at Box Hill to supply the eastern suburbs of Melbourne. In 1893, the company's name was changed to the Colonial Gas Association Limited. During the 1890s, the company acquired regional gasworks in Queensland, Western Australia and South Australia, followed by its first gasworks in New South Wales, in 1911. In 1914, the company consolidated its metropolitan supply area by purchasing the Oakleigh and Footscray gasworks. Further expansion occurred in the 1920s with the purchase of established gasworks at Williamstown, Frankston and Dandenong and the acquisition of ten further gas undertakings in Queensland and New South Wales, making the firm the fifth largest gas producer in Australia. info from The Colonial Gas Association Limited, circa 1893 https://collections.museumvictoria.com.au/items/1553322 Originally formed by the five Tangye brothers from Cornwall as James Tangye & Brothers in 1857, this Birmingham engineering firm grew to become one of the largest suppliers of jacks, pumps, steam and oil engines, hydraulic presses, gas producers and machine tools in the late 19th and early 20th centuries. The successful sideways launching of I.K. Brunel's 'Great Eastern' from the mud of the Thames in 1857 using Tangyes hydraulic jacks gave the firm much needed publicity and new orders flowed in. To finance expansion, George Price provided additional capital and the company name became Tangye Brothers & Price in 1859. A new factory known as the 'Cornwall Works' was built in Clement Street, Birmingham. In 1872, the firm became Tangye Brothers and in about 1879- 1880 began production of internal combustion stationary engines based on Horace Robinson's patents, later using the Otto four-stroke design for its Soho range of gas engines. Examples of the Soho engine were exhibited by the firm at the 1880 Melbourne International Exhibition. Petrol and oil engines were made from the 1890s onward, and by 1910 had developed into the Model B, BR and AA series engines. Tangyes supplied custom-built pumps and presses for particular applications, becoming a major exporter of engineering equipment. In 1884, Tangye Brothers opened a custom-built branch office, showroom and warehouse in Melbourne at Cornwall House in Collins Street West, advertising the full range of engineering products. These lantern slides images are taken from Tangyes product catalogues from the 1910-1925 period and are believed to have been used as sales promotional aids in Australia by the Tangye Brothers. info from https://collections.museumvictoria.com.au/articles/4670 Historic - Industrial Steam Operated Water Pump built by Tangye Bros and used by the Colonial Gas Company - Melbourne, Victoria, AustraliaSectioned steam pump so that the pump workings can be seen. Tangye Birmingham, This steam pump was presented by the colonial gas Assn Ltd (brass plaque)puffing billy, steam pump, sectioned, tangye bros

60lbs rail that was used throughout the Victorian rail network. In 1887 Gibbs, Bright and Co. had a contract with Victorian Railways for railway and canal construction and supply of Krupp Rails. Gibbs, Bright and Co were merchant bankers and shipping agents and merchants who where also Directors of the GWR ( Great Western Railway ) and the Ship The "Great Britain" in England Gibbs, Bright and Company had principally been involved in shipping and trading, mainly in the West Indies, but following the discovery of gold in Victoria they established an office in Melbourne and soon became one of the leading shipping agents and merchants in the Colony. They expanded into passenger shipping and soon established offices in Brisbane, Sydney, Newcastle, Adelaide and Perth as well as launching passenger services between England, Mauritius and New Zealand. Gibbs, Bright also held a number of financial agencies from British mortgage, finance and investment companies as well as representing several British insurance companies in Australia. In addition they conducted a growing import business as well as an export business that included livestock, dairy produce, wool and flour. Also the company played a substantial part in the development of Australia's mineral resources, starting with lead in 1895, and later venturing into tin, gold, copper, cement and super phosphates. In Australia, after WWI, many of the larger companies were managing their own import and export so Gibbs, Bright and Company tended to focus its Agency business on smaller companies while expanding their interest into other markets such as timber, wire netting, zinc, stevedoring, road transport, marine salvage, gold mining as well as mechanical, structural, electrical and marine engineering. The Company's shipping interests continued to grow as well and still formed a major part of its business. In 1948 the parent company in England took the major step from tradition when they changed the business from a partnership into a private limited company. The name was the same, Antony Gibbs and Sons Limited, and in practice the effect of the change was very little. Some of the firm's branches and departments had already become limited companies and the formation of a parent company simplified the structure. The Australian operation was in time changed to Gibbs Bright & Co Pty Ltd in 1963. In 1848 Alfred Krupp becomes the sole proprietor of the company which from 1850 experiences its first major growth surge. In 1849 his equally talented brother Hermann (1814 - 1879) takes over the hardware factory Metallwarenfabrik in Berndorf near Vienna, which Krupp had established together with Alexander Schöller six years earlier. The factory manufactures cutlery in a rolling process developed by the brothers. Krupp's main products are machinery and machine components made of high-quality cast steel, especially equipment for the railroads, most notably the seamless wheel tire, and from 1859 to an increased extent artillery. To secure raw materials and feedstock for his production, Krupp acquires ore deposits, coal mines and iron works. On Alfred Krupp's death in 1887 the company employs 20,200 people. His great business success is based on the quality of the products, systematic measures to secure sales, the use of new cost-effective steel-making techniques, good organization within the company, and the cultivation of a loyal and highly qualified workforce among other things through an extensive company welfare system. From 1878 August Thyssen starts to get involved in processing the products manufactured by Thyssen & Co., including the fabrication of pipes for gas lines. In 1882 he starts rolling sheet at Styrum, for which two years later he sets up a galvanizing shop. The foundation stone for Maschinenfabrik Thyssen & Co. is laid in 1883 with the purchase of a neighboring mechanical engineering company. In 1891 August Thyssen takes the first step toward creating a vertical company at the Gewerkschaft Deutscher Kaiser coal mine in [Duisburg-]Hamborn, which he expands to an integrated iron and steelmaking plant on the River Rhine. Just before the First World War he starts to expand his group internationally (Netherlands, UK, France, Russia, Mediterranean region, Argentina). info from The company thyssenkrupp - History https://www.thyssenkrupp.com/en/company/history/the-founding-families/alfred-krupp.htmlHistoric - Victorian Railways - Track Rail - made by Krupp in 1888Section of VR Krupp 1888 Rail mounted on a piece of varnished wood. Rail made of ironpuffing billy, krupp, rail, victorian railways

On the 19 February 1942, 242 Japanese aircraft, in two separate raids, attacked the town of Darwin, ships in the harbour and the town's two airfields in an attempt to prevent the Allies from using them as bases to contest the invasion of Timor and Java during World War II. Darwin was lightly defended, relative to the size of the attack, and the Japanese inflicted heavy losses upon Allied forces at little cost to themselves. The two Japanese air raids were the first, and largest, of more than 100 air raids against Australia during 1942–43.The Bombing of Darwin, also known as the Battle of Darwin, on 19 February 1942 was the largest single attack ever mounted by a foreign power on Australia. The urban areas of Darwin also suffered damage from the raids and there were a number of civilian casualties. As a result more than half of Darwin's civilian population left the area permanently, before or immediately after the attack. Timber framed print of planes depicting the bombing of Darwin Harbour. Gold metal plaque - BOMBS OVER DARWIN Presented to Wangaratta RSL Limited Edition Print 234/1800 by James Baineswwii, bombing of darwin, battle of darwin

The 11th Australian Infantry Battalion AIF was was among the first infantry units raised for the AIF during the First World War It was first raised at Black Boy Hill Camp in Western Australia on 17 August 1914 and recruited from the militia units. The picture of the 11th Battalion at the Cheops pyramid in Egypt in 1915 was taken just before the landing at Anzac Cove. Not many of the soldiers in this picture survived the 8 month campaign. After the Campaign on the Gallipoli Peninsula, the 11th Battalion went on to serve with distinction in France and Belgium from 1916-18. They returned to Australia at the end of the war and disbanded on the 5 February 1919. The Battalion was awarded a Kings Colour for it’s service during the war which was held in the of custody the Militia 2/11th Battalion. This picture was taken just before the landing at Anzac Cove during the First World War. Not many of the soldiers in this picture survived the 8 month campaign. This now famous picture of the 11th Battalion AIF at the Cheops pyramid in Egypt in 1915 is shown throughout military history displays and books the world over.Burgundy frame, black mounting, gold writing with a photo of 11th Battalion standing and sitting on the Cheops pyramid in Egypt. There are seven rising suns underneath the photo.ANZACS at War. Fall an ANZAC Rise a legend. The 11th Battalion at the Cheops pyramid in Egypt. We will remember - Lest we forget. Limited edition 4438 of 5000.anzac, wwi, world war 1, cheops, pyramid, soldiers

Memorial plaque and Letter of condolence from Buckingham Palace signed by King George V sent to the family George William PAGE - born 20/5/1900. He served with the RAN aboard HMAS Tingira a training ship for boys during the First World War. He died by accidental drowning in Sydney on 16/3/1919. Service No 6790George William PAGE served with the RAN aboard HMAS Tingira a training ship for boys during the First World War. On 16/3/1919 he died by accidental drowning. In 1911 Sobraon was purchased by the Commonwealth Government for £15,000 and fitted out as a boy’s training ship at Mort’s Dock Balmain. The name chosen for her was an aboriginal word meaning ‘open sea’ and she was commissioned into the RAN as HMAS Tingira on 25 April 1912. On 1 June 1912 the first batch of 37 boys recruited from New South Wales joined Tingira. Drafts from other states quickly followed, completing the first intake of 100. Entry was limited to boys between the ages of 14½ and 16 years who were bound to serve for seven years following their 18th birthday.Round metal plaque and letter with red crest mounted on rectangular timber board."HE DIED FOR FREEDOM AND HONOUR" GEORGE WILLIAM PAGEgeorge william page, memorial plaque, royal australian navy