366 pages plus an index to regulations up tp page xxvii and blank pages for notesfictionThis training module was available to enginemen who had completed Modules 1 to 5 (1983 Scheme). The manual contained fault finding checklists and standard procedures to be carried out if faults occured. Every driver was required to be conversant with and follow the instructions. Enginemen issued with this manual had to carry it with them at all times when in charge of a diesel electric locomotive. vline safety, vline training, railways victoria

2 small booklets for instruction related to traffic control and signals, Both have paper covers, one on red paper and the other is pink. Each one is bound with staples along the centre fold and printed in black ink.fiction These manuals were printed by Victorian Railways in 1927 and 1969 and therefore document the changes in signalling systems over this time frame.vline training, railways victoria, railways signalling systems

A collection of Locomotive operation manuals. All are paperback and feature an image of the relevant locomotive on the cover. Relevant illustrations are included in each publication. Cover is of card and they are bound with staples.fictionThe manuals refer to the following locomotives:- Westrail L Class (November 1983) originally built by Clyde Engineering from 1967 for the Western Australian Government Railways (WAGR) for use on the Eastern Goldfields Railway between Perth and Kalgoorlie. In 1983, three were leased to V/Line to haul services on the standard gauge Melbourne to Albury line, sometimes extending through to Sydney.A class (January 1984) were initially used for "Intercity" passenger services within Victoria. In this service, they operated at speeds up towards 125 km/h. Later, they were also used for freight services.N class (September 1985) produced by Clyde Engineering and entered service in 1985 and still operating in 2023. 422 Class diesel-electric locomotives (August 1983), designed by Clyde Engineering were introduced in January 1969. Following crew training, the engines entered service on the Main Southern line between Sydney and Albury and the Illawarra line from Sydney to Port Kembla and Moss Vale. Among the passenger services they hauled were the Southern Aurora and the Spirit of Progress. From 1982, they began to operate through to Melbourne. This ceased in February 1990 when non-air-conditioned locomotives would no longer be accepted by Victorian drivers.railways victoria, diesel-electric locomotives

This plaque commemorates the official opening of an occasional child care centre and pre-school in South St, Wodonga in 1989 by the Governor of Victoria Dr. Davis McCaughey. With strong population growth in Wodonga community services had expanded rapidly throughout the 1980s. The first child minding centre had opened in 1975. BY 1987 Upper Murray Family Care provided full-day family day care and occasional care and there were also 2 private child care centres. By 1986 there were 350 full-time places and 75 part-time places, but pre-schools were unable to fill the demand for another 511 applicants. This new facility helped to ease a little of the problem. As well as the inscription included here, the name of the Mayor, all members of the Wodonga Council, City Engineer, Architect and Builder are listed on the plaque.This item illustrates an important development in the provision of pre-school and child care services in Wodonga.A bronze rectangular plaque with detailed inscription, designed to be attached to the wall of a building. There is a hole in each corner for bolts to be inserted. The text is raised above the surface of the plaque. It features the symbol of the shield of the Rural City of Wodonga in the top left corner.fiction"RURAL CITY OF WODONGA WODONGA OCCASIONAL CHILD CARE CENTRE AND SOUTH STREET PRE-SCHOOL CENTRE OFFICIALLY OPENED BY HIS EXCELLENCY DR. DAVIS MCCAUGHEY, A.C., GOVERNOR OF VICTORIA ON 9TH DAY OF MAY 1989child care facilities wodonga, children's services wodonga, pre-schools wodonga

A maroon coloured volume with black text including the title, brief outline of its purpose and publication date.fictionThis book aimed to provide information about how the best performance could be obtained from a locomotive. It provided knowledge about the construction of a locomotive and reasons for equipment provided in order to develop in engineman an appreciation of the machines of which they were in charge.vline training, railways victoria, operation of locomotives

A small booklet with a brown cover and a foreword section outlining the purpose of the publication. This copy has been covered in brown paper to protect the covered. The title has then been handwritten on the paper by the owner.fictionThis booklet was prepared by the executive committee of the Australian Federated Union of Locomotive Enginemen in order to assist its members to become proficient in the Rules and Regulations, Engine Working, Westinghouse Brake, and other subjects, which were essential for the proper performance of their daily duties, and to especially assist those who were preparing for examination for Driver's Certificate. It included a foreword written by W. C. H. COLLINS, General Secretary.vline safety, vline training, railways victoria, railway unions

2 booklets documenting Union regulations for railway employees, the 1979 publication on green paper and the 1987 publication on buff coloured paper. Both have staple binding on the spine.fictionThese handbooks document changes in industrial awards put in place to regulate the work conditions and safety in the railways. The 1979 Information Handbook was issued by the Central Council of Combined Railway Unions. The 1987 publication by the Australian Federated Union of Locomotive Enginemen outlined the Locomotive Operating Grades Award as implemented by the Victorian State Transport Authority.vline safety, vline training, railways victoria, australian federated union of locomotive enginemen

2 small publications outlining changes to existing regulations. Both bear the logo of the Victorian Public Transport Corporation and are printed in black ink.fiction These booklets outline changes to regulations governing rules and operational procedures of Victorian Railways. The white booklet outlines Supplementary Rules and regulations Amendments for the operation of locomotive hauled driver only passenger trains in 1992. The pink booklet is a guide to the 1994 book of rules and operating procedures. It included major changes with respect to existing safe working policy so was a critical document issued to all staff to be read in conjunction with the full book of rules. vline safety, vline training, railways victoria, public transport corporation victoria

A large collection of Victorian Railways Newsletters dating from 1962 to the late 1980s. Each booklet is 19 pages a features a combination of articles, illustrations and news items.fictionThese booklets document development and news items from Victorian Railways from 1963 until the late 1980s. During this period the corporate name changed to VLine but the newsletter continued to be published as VLine Newsletter. The newsletter continues to be published for employees of VicRail in the 2020srailways victoria, railways newsletter

An 8 page leaflet printed on buff coloured paper with brown print. It includes 3 photos and an itinerary for the celebrations.fiction This item was written for the celebration of the centenary of the linking by rail of Victoria and New South Wales systems on June 14, 1883. It gives a brief history of the stages and stories surrounding the linking of the lines and the events which occurred in 1883. It also contains a programme of activities held in Albury and Wodonga as part of the celebrations a century later.vline safety, vline training, railways victoria

The Wodonga Pharmacy was opened on 8 September 1952 at 166 High Street, Wodonga by Albury chemist Mr. Arthur Fussell. The building had previously been Charlie Edmonson's white goods store. A year later it was acquired by Mr. Ken Moir who had moved from Shepparton, Victoria to manage the business. The original premises were sold so the business moved to 176 High Street in 1954. Ken Moir sold the business to Graham Crapp, Harold Dennis and Robert Wood 30 years later.This item represents a local business and contributes to documentation of the development of businesses in Wodonga.Black and white photo of old pharmacy building in Wodonga mounted on cardboard.fiction Along front of upper facade: "KODAK FILM / The WODONGA PHARMACY"wodonga pharmacy, arthur fussell, businesses wodonga

This booklet is a small paperback of 27 pages including some images explaining the background of the Victorian Division of the Australian Federated Union of Locomotive Enginemen.fictionThis booklet was produced by the Australian Federated Union of Locomotive Enginemen in 1975. On that date the Victorian Division of the Australian Federated Union of Locomotive Enginemen was 114 years old, making it the oldest continuous railway union in the world. It was formed as the Locomotive Engine Drivers' Association in 1861- just 7 years after the first railway, Flinders Street, Melbourne to Sandridge (now Port Melbourne) was officially opened. This booklet also marked the occasion of the first major renovations to the Union's premises and facilities since the building was completed in December 1914.australian federated union of locomotive enginemen, afule, railway unions

A publication of 34 pages produced by Environment Victoria Inc. It has brown cover featuring an image of a locomotive superimposed over an outline map of Victoria. It consists of 36 pages including appendices, references, a map of an Environment Victoria Enhanced Victorian Passenger Rail Network and a map of the Victoria's Regional and Rural Bus service.fiction This document is a response by Environment Victoria to the Fast Train Report. It advocates the establishment of an integrated transport approach in Victoria including the need for a Rural and Regional Planning Strategy to be developed in conjunction with the Metropolitan Strategyrailways environmental impact, victorian railways, environment victoria

A collection of replicas of survey maps acquired to build the Wodonga to Tallangatta Railway line. Each survey includes a diagram of a portion of the line showing survey measurements and details of the land which that portion of the line will run through. It also includes the name of the landowner from whom the necessary land was acquired.The first section of the Wodonga to Tallangatta line opened in 1889 and was further extended in 1891. It was a vital community link until the passenger service closed in September 1961. The last regular goods train on the line ran on 21st April 1978. These maps give detail of the surveying and building of the line.victorian railways, wodonga to tallangatta rail service

A separator is a centrifugal device that separates milk into cream and skimmed milk. Separation was commonly performed on farms in the past. Most farmers milked a few cows, usually by hand, and separated milk with a hand operated machine for domestic use. The milk was poured into the bowl on the top and the handle had to then be turned fast enough to get the separator up to speed adequate to separate the cream and the milk. The milk would come out of one spigot and the cream out of the other. In general practice some of the skimmed milk was consumed by the family, while the rest may have been used to feed calves and pigs. Enough cream was saved to make butter, and the excess was sold. In many cases excess could be bartered or swapped with neighbours for other items of produce. ALFA-LAVAL SEPARATORS The principal works and head office of Aktiebolaget Separator was established by Gustaf de Laval in Stockholm. The first Laval milk separator was patented in1884. In Australia three old established firms commenced pioneering the Alfa Laval cream separators in about 1885. These were A. W. Sandford & Co. Ltd., in Adelaide, J. Bartram & Son, of Melbourne, who have ever since been the Victorian agents of Aktiebolaget Separator. In New South Wales and Queensland, the pioneering firm was Waugh & Josephson Ltd. J. Bartram & Son, the distributor of the separator in this collection, established their business in Melbourne in 1881. In 1892 Bartram & Son estimated that 1,130 of these machines were operating throughout Victoria. This item is significant as it is representative of domestic and dairying machinery used throughout rural areas of Australia in the early to mid 20th century.The separator is made in 3 sections. The base is made from cast iron. The cover and vat are made from silver painted tin. There are 2 outlet spouts. The detachable handle, made from cast iron and wood, is held in place by a screw. A name plate featuring the Victorian distributor, J Bartram & Son of Melbourne and a plate outlining patent information are attached to the base by screws.Around edge of wheel "Aktiebolaget Separator Stockholm/ 2236"dairying industry, dairy machinery, milk separators

These stirring rods with long handles and base referred to as a dasher were common in the dairy industry. They were made to agitate milk or cream in milk cans and were used on dairy farms and in old creameries. They helped to cool the milk and stop it from separating. They were used on the properties of the Conway and Lemke families in Wodonga.These items are significant as they are representative of tools used in the early dairy industry and were owned by families in Wodonga.Milk / cream stirrers made from steel with a circular blade attached to enable milk to flow through.dairy industry wodonga, dairy tools, dairy machinery

This Can opener was used at the Bandiana Golf Club near Wodonga. Bonzer was a trademark of Mitchell & Cooper of England. Alfred Mitchell & Arthur Cooper started as silversmiths and engravers in 1879 in East London. The family owned business is still operated by Guy Cooper, great grandson of Arthur Cooper. Bandiana Army Golf Club 18 hole course opened in 1949. The Club reached its highest membership with 400 members in the late 1980s. Members played their last competition at this course on 30th October 2103.This utensil was used at the Bandiana Army Golf Course near Wodonga.Cast iron commercial can opener with rotating handle including a red knob.Underneath base plate "THE BONZER /TRADEMARK/ CATERER'S/ CAN OPENER/ MADE IN ENGLAND"caterers' utensils, kitchen utensils

Seed broadcaster were used to distribute seed across a small area or to fill in patches where seeding has been missed. This method does not ensure a uniform distribution of seeds unless the person using the machine walks at a very measured pace. It also requires a lot of time and manual labour if used in larger areas. It was most used for planting cover crops, grains, grasses and similar plants that do not need to be in neat rows. The hand-crank broadcast seed spreader was invented in 1868 by Samuel S. Speicher (aka. Spyker) in Indiana, USA. By 1955 new developments included the invention of a seed broadcaster on wheels and these smaller spreaders started to disappear.This item is representative of agricultural machinery used on a local, national and international level in the late 19th and early 20th century.A metal hand seed broadcaster. A hopper at the top was the receptacle for seed. The wheel with a handle on the side when turned drives the cogs attached to an axle. This action rotates the attached spindle with blades to propel seed out the front of the broadcaster. The broadcaster would have had a shoulder strap and a bag of seed would have been added to the hopper and secured with twine through the holes around the top.agricultural tools, farm machinery

A stirrup pump is a portable reciprocating water pump used to extinguish or control small fires. It is operated by hand. The operator places a foot on a stirrup-like bracket at the bottom of the pump to hold the pump steady. The bottom of the suction cylinder was placed inside a bucket of water. Water was drawn by pumping the handle up and down to create suction. The pumps were used in a variety of settings to enable quick action if a small fire broke out. They were a vital tool in London during the Blitz of World War 11. On the local level they were also used for spraying fruit trees, plants and vines. The Crescent Tool Company was founded in 1907. The Crescent brand has changed ownership multiple times. It is currently owned by Apex Tool Group but still also trades as Crescent in Australia. This pump was donated by Geoff Williams of Wodonga and was used at "Orange Vale" farm at Oxley Flats near Wangaratta. "Orange Vale" was owned by Mr. Robert Williams. Widely known as "Uncle Bob". in the 1940s Mr. Williams opened up the family property, established in the 1860s, as a camp for young people from Wangaratta. By 1951, this had extended to catering to group camps for children from Victoria, New South Wales and Queensland. 250 children could be accommodated at one time and as many as 3,000 children enjoyed the facilities each year.These pumps were important in fire fighting in a range of settings and were adapted for use in agricultural and small farm settings,A brass stirrup pump with wooden handle. It consists of 2 parallel brass pieces, one with a foot piece attached to keep the pump steady. The base of the pump is fitted with a pierced metal filter that prevents grit and debris being drawn into the pump and fouling it. 2 butterfly screws enable adjustment of height and securing a hose.crescent tools, orange vale, fire equipment

Historical information Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s.As part of the Sarah Coventry collection, the necklace has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Necklace with three strands of faux pearls and a large faux green stone at the silver toned metal clasp on the front, and a large faux pearl at the clasp on the back. includes box featuring Sarah Coventry brandingOn outside of box : "Sarah Coventry® /PTY. LTD. /WODONGA, VICTORIA On inside of lid: "Sarah Coventry" On internal cardboard mounting: "Made in Canada / Sarah Coventry Pty., Ltd. / WODONGA (SC) VICTORIAsarah coventry, costume jewellery, industry wodonga

Historical information Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. The "Aristocrat" line was first released in Canada in 1969 for several years. It was distributed from the outlet at Sarah Coventry Park, Wodonga.As part of the Sarah Coventry collection, the tie pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.A small square tie pin of silvertone plated metal with an ice blue rhinestone in the centre. A short chain and clip are attached. A small diamond shape has the "SarCov" brand on the back. The pin is in its original packaging of a cardboard box with clear central oval on the front. The back of the box bears the Sarah Coventry branding as does the internal card.On internal mounting card: "Made in Canada/ Sarah Coventry Pty. Ltd / WODONGA (SC) VICTORIA" On back of box: "Sarah Coventry® PTY. LTD / SARAH COVENTRY PARK/ WODONGA, VICTORIA / PTD IN AUST"sarah coventry wodonga, men's fashion accessories, costume jewellery

Historical information Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sar*gem Pty. Ltd”, for several more years in the 1980s, along with a new range of fashion jewellery, Affinity. This catalogue was produced by Sar*gem Pty Ltd in 1982As part of the Sarah Coventry collection, the catalogue has local significance connected to the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery. A coloured catalogue promoting the Affinity Jewellery line released in 1982. The back cover features a fundraising campaign for the Guide Dog Association. Business contact details on the back cover use the company name "Sar*Gem Pty Ltd", Hume Highway Wodonga.sarah coventry, sarah coventry wodonga, sarah coventry affinity

The Volunteer Air Observers Corps (VAOC) was a civil defence formed on 31st December 1941 as part of the Royal Australian Air Force (RAAF) support during World War II. The VAOC rapidly developed observation posts manned by men and women all over Australia, the main purpose being to identify and report any aircraft movement to an RAAF regional base. During the early days of 1942 the posts were manned 24 hours a day, gradually relaxing as the threat to Australia lessened. All members were continually trained in aircraft identification and provided an invaluable service to the RAAF. The VAOC was disbanded in April 1946. During its operation over 2,600 observations posts were maintained and approximately 25,000 personnel served. These certificates were presented to Mrs. H (Hazel) Penfold and Mr. A. R. (Alexander Rex) Penfold in recognition of 3 years of service during this period. Hazel was the daughter of Mark Ellwood and Rosina Mary Smale and the older sister of Grace, wife of John Hamilton-Smith. The family of Grace and John Hamilton-Smith have donated many items to the Wodonga & District Historical Society. This item commemorates one of the important roles played by civilians on a local, state and national level during WW2 and is attached to a local Wodonga family.2 coloured certificates on cream paper. The design includes 2 aircraft and a man and woman positioned between with the Union Jack and the Australian flag in the top section above the Royal Australian Air Force insignia and the words "For King and Country" Dark cream columns with a pale blue surround frame the details on the certificate. 3 one Years service stickers are attached at the bottom above the insignia of the Volunteer Air Observers Corps.For King and Empire Presented to Mrs H. Penfold by the ROYAL AUSTRALIAN AIR FORCE As a record and in appreciation of patriotic response to the call of country by serving in the VOLUNTEER AIR OBSERVERS CORPS This 20th day of September 1945 signed G. Jones Air Vice Marshall Chief of Air Staff signed ? Unit Commanding Officer volunteer air observers corps, vaoc, civilians in ww2, hamilton-smith collection

Norman Thomas Henshaw operated a tailor's business in High Street, Wodonga for several years. He was born in Albury in 1891, the sone of WIlliam Henshaw and Ellen nee Goldsworthy. At various times, Norman operated a tailor business in Albury, Rutherglen, Beechworth and Wodonga. His business in High Street, Wodonga was advertised as being located opposite the Fire Brigade Hall. Mr. Henshaw died 10 September 1966 and his wife Agnes died on 30 July 1999, aged 107. They are buried in the Waugh Rd. cemetery in Albury, NSWThis item has local significance as it represents business which operated in Wodonga in the 1920s. It is also representative of a significant local family.A metal and enamel match box holder promoting Henshaw's Tailor in Wodonga. The back features a calendar for 1927. On Front: "With compliments from/ N. T. Henshaw/ Tailor/ High Street "/ Wodonga/ G. & G. A/SIA. LTD. On Back: 1927 Calendar On Side: "STRIKE" N. T. HENSHAW / TO BE SUITED"wodonga businesses, henshaw tailor, high st wodonga

A soft cover publication of 590 pages. The cover features several photos of people and places in Sunshine, The background of these cover photos is coloured in yellow and orange. The book includes photos and photo stories as well as extracts from newspapers, government archives and census records to document key developments and stories of hardships and achievements during a critical period of industrialisation and postwar migration to Australia. It includes bibliographical references and an index.non-fictionThis publication by the Sunshine & District Historical Society builds on an earlier publication "Harvester Town: The Making of Sunshine 1890-1925". It focuses on the post-war migration years when thousands of young immigrants settled in the new City of Sunshine, bought land, built homes, had families and worked in the area's important industries. It uses a range of primary resources including photos, photo stories, interviews and other documents to explain the challenges, achievements and issues faced in the development of "Multicultural Sunshine"multiculturalism australia, , sunshine victoria, postwar migration

The Returned Sailors' and Soldiers' Imperial League of Australia was formed in 1916 to support servicemen returning from World War 1. In 1940 its name was changed to Returned Sailors', Soldiers' and Airmen's Imperial League of Australia and again in 1966 to Returned Services League of Australia. Arthur Ernest Beard enlisted in the 10th Battalion in 1914 and was discharged as medically unfit in 1918. His service included three years and 115 days of overseas service. He was gassed during his war service, resulting in ongoing health issues. Beard received an incapacity pension. Despite his ill health, Arthur dedicated many years of service to the committee of the Returned Sailors' and Soldiers' Imperial League of Australia Wodonga branch. At various times he served as President and secretary. He was on the committee when the branch was lobbying for the construction of a Soldiers' Memorial and also a Soldiers' Memorial Hall for Wodonga. Arthur also participated in groups and community activities, including the Wodonga Boys’ Club, Wodonga Public Library Committee and the Wodonga and District Progress Association. Arthur died on 29 Jun 1940 in Wodonga, Victoria, aged 46 years. This certificate is significant as it recognises service to the Wodonga Branch of the RSSILAA coloured certificate on heavy card presented by the Wodonga Branch of the Returned Sailor and Soldiers Imperial League of Australia. It features an archway imprinted with the name of the RSSIL with the League emblem surrounded by the flags of England, Australia and the Royal Australian Navy. It is adorned with an anchor and rifle and the words "Great War 1914 - 1919. An image of Anzac House, the headquarters of the R.S.S.I.L.A. in Melbourne is on the lower left hand side. The words of appreciation are printed in the centre of the archway. The insignia of the Australian Commonwealth Military Forces is in the centre at the bottom. WODONGA BRANCH / Presented to A. BEARD As a token of esteem and in grateful recognition of valuable services rendered as PRESIDENT Year 1922 - 23 A. A. Reid President R. S. Benson Secretaryreturned sailors & soldiers imperial league, wodonga rssila

Arthur Edward Stevenson enlisted on 17 September 1914 and served with the 14th Battalion of the AIF. He was killed in action at Gallipoli on 20 August 1915 at age 28. His personal effects of a belt, hairbrush, knife, postcards and photos were returned to his brother John in June 1916. Later that year, John Stevenson wrote to the Officer in Charge of base records, asking for confirmation of his brother’s death, as he had received a letter from Arthur dated 27 August 1915, seven days later than the date on which he was reportedly killed. The Army confirmed that Arthur had in fact died, and concluded that he had likely misdated his letter. In 1920, Arthur’s sister Rachel wrote to the Department of Defence, asking whether her brother’s grave had been located and again querying the date of his death. Later, she completed a form that was sent to next of kin seeking information on deceased soldiers for the Australian War Memorial’s Roll of Honour. Arthur Stevenson’s death is recorded at the Lone Pine Memorial on the Gallipoli Peninsula. Honour Certificates WW1 - From 1915 onwards, recruits in many shires and towns in eastern Australia were honoured by local government authorities. A common form of recognition was the award of honour certificates. The first honour certificates were presented in 1915 and 1916 to men who had yet to leave Australia. The designers and publishing companies solicited business directly from councils. Publishers began to print two different types of certificates: honour certificates to thank soldiers who had survived and memorial certificates to commemorate the dead. D.W. Paterson, a Melbourne publishing firm, claimed they had supplied certificates to over 150 cities and shires in Victoria and New South Wales, including the Shire of Wodonga. Paterson also had the widest range of designs The certificate signified that the officials of the community recognised and shared the family's pride and grief. The certificate was signed by S. T Parker, Shire President and R. H. Murphy, Council Secretary on 4th August 1919.This certificate is significant as it recognises service given to Australia by Arthur Edward Stevenson. Coloured certificate presented to the family of Arthur Ernest Stevenson by Wodonga Shire Council. The certificate is mounted behind glass in a wooden frame.gallipoli, world war 1, arthur edward stevenson

A separator is a centrifugal device that separates milk into cream and skimmed milk. Separation was commonly performed on farms in the past. Most farmers milked a few cows, usually by hand, and separated milk with a hand operated machine for domestic use. The milk was poured into the bowl on the top and the handle had to then be turned fast enough to get the separator up to speed adequate to separate the cream and the milk. The milk would come out of one spigot and the cream out of the other. In general practice some of the skimmed milk was consumed by the family, while the rest may have been used to feed calves and pigs. Enough cream was saved to make butter, and the excess was sold. In many cases excess could be bartered or swapped with neighbours for other items of produce. LISTER - A prominent make of separator which became very popular with the dairy farmer, was the "Lister" separator. The early separators sold by R. A. Lister in the 1880's, were made by "Koefoed & Hauberg", Copenhagen. Denmark, called the "Alexandria". Ashton Lister became the sole agent for Koefoed & Hauberg made separators in England and all the English Colonies, throughout the world. Being an enterprising salesman, Ashton, sent his son Edward on a three-year sales tour of Australia & New Zealand in 1890, (hence the strong presence of Lister in Australia.) Initially, the separator was totally manufactured in Denmark and assembled in Dursley, England. By 1892 Lister were making parts at their Victorian Iron Works, and around about the early 1900's, Lister began manufacturing separators in their own right, severing ties with Koefoed & Hauberg. The Lister firm is still going today, under the name of Lister Petter, England, but do not manufacture separators, as the manufacture of farm / domestic separators ceased in the early 1960's.This item is significant as it is representative of domestic and dairying machinery used throughout rural areas of Australia in the early to mid 20th century.The separator is made in 3 sections. The base is metal plated with blue enamel. The vat is made from silver painted tin. There are 2 outlet spouts. The detachable handle, made from cast iron and wood, is held in place by a screw. A metal plate featuring the manufacturer information is attached to the side of the handle. Model CR 15 hand operated table version.On metal plate attached to handle" Lister/ MADE BY R. A. LISTER & Co.LTD. / AT DURSLEY ENGLAND / VICTORIAN AGENTS / GIPPSLAND & NORTHERN CO-OP/ CO. LTD. / MELBOURNE C.1"dairying industry, dairy machinery, milk separators, lister separators

Tallangatta Butter Factory The Tallangatta Butter Factory and Creamery Co. Ltd was established as a co-operative with application for shares closing on 19 December 1891. It was registered in February 1892 and notified in the Victorian Government Gazette. It was one of the first north eastern Victoria dairy co-operatives. The Upper Murray and Mitta Herald on Thursday 23 March 1905 recorded that advice had been received of the sale in London of a shipment of 191 boxes of sent via India. The sale fetched a price at 105 shillings per cwt (hundredweight). When the township of Tallangatta was moved due to the raising of the Hume Weir in 1956, a new factory was built at the new location. It continued to operate until 1959 when it merged with the Kiewa Butter Factory to become the North Eastern Dairy Company. In 1985 this organisation was taken over by the Murray Goulburn Co-operative Eskdale Butter Company. After the selling of shares to form a co-operative, The Eskdale Butter Factory was officially opened on Saturday 26 November 1904. It closed after a merger with Murray Goulburn in 1969.This item is representative of the dairy industry in North East Victoria.2 wrappers for butter produced in North East Victoria by the Tallangatta Butter Factory and the Eskdale Butter Factory and Creamery. Both wrappers are a single sheet of folded paper with coloured images and logos.dairy industry victoria, tallangatta butter factory, eskdale butter factory

Hair and beard clipping was frequently carried out at home prior to WW11 and often much later in rural areas. Manual hair clippers were readily available for purchase. Brown's Clippers were a popular choice for many Australian men. This company was based in BIrmingham, England and operated from 1939 until the end of the 1950s. This item has significance as a common item for men both domestically and commercially in the middle decades of the 20th century.A set of manual hair clippers made of chromed steel. An adjustable screw allowed blades to be interchanged.BROWN'S CLIPPER CO (1939) LTD / BIRMINGHAM.ENGLANDhair clippers, home barbers, brown's clipper co. ltd