Diggers & Mining. The gold licence. The Government Camp. Slide: On the more important goldfields, as the number of diggers grew, the Commissioners' establishments were increased, and permanent buildings were erected at their headquarters. The group of tents and buildings forming a Commissioner's headquarters became known as the Government Camp. The Camp included the office of the Commissioner, the licence office, the escort office, the lock-up, staff quarters, and the barracks of the police and any soldiers attached to the Camp. Markings: 14 994.LIF. 4. Used as a teaching aid.hanimounteducation, tertiary, goldfields

PERSONAL TRUNK OF CAPTAIN PETER SPENCER HAYMAN MCThis trunk was owned by Peter Spencer Hayman, who was regarded as a ‘Tobruk hero’. Hayman was the son of a Bank manager, Spencer Lewis Hayman and Agnes Lindsay Hayman. He was born in Exeter S.A. on 23/11/1916. He enlisted in the Australia Army at the age of 23 on 13/05/1940. His service number was VX14987. Hayman was a leader of a fighting patrol and served in multiple sites in Syria and Lybia. During his service in Lybia he lead his campaign through great difficulty and bravery in Tobruk. Although wounded by a grenade, he continued to lead his men into an enemy stronghold until resistance from a joining post compelled him to break off the engagement. He successfully brought his party back with very few casualties. Hayman was awarded the military cross in 1941. He was a Lieutenant when awarded, and was made captain of the 2/24 Australian Infantry Battalion shortly afterwards. He was killed in action on the 11/07/1942 and is buried in the El Alamein war cemetery. His father was flown to London to receive the medal. The inscription on his headstone reads; “Beloved son of Spencer and Agnes Hayman of Bendigo” (AII.A.21. – cemetery/memorial reference number). As an item owned by a ‘Tobruk hero ’ who was awarded the eminent military cross for bravery, ‘forceful leadership’ and ‘splendid courage’, this trunk is of national historic and social significance. It also has great interpretive capacity as an item that speaks of an impressive military story. Standard Army issue trunk. 88cm L x 51cm W x 33cm D. Dull grey in colour. There is provision for a tray to be fitted just under the lid. This tray was the same physical size as the trunk. The base has 2 cleats (88cm x 5.5cm), made of timber, to keep the trunk off the ground. An additional hasp and keeper have been fitted (near the centre of the lid) to hold it shut. The original type lock needed a key and were not very serviceable.P S H VX14987 408

Badge - issued by the Lions District No. 201, Vic, featuring a map of Victoria with the letter V and number 1 included in the map, featuring a Box Hill toastrack style tramcar under the badge with the numbers 95-96 on the front of the tram. Gold badge with brown paint infill in the map of Victoria and a yellow paint infill on the tram finished with a gloss varnish. Has a pin clip on the rear with a locking mechanism. Made by Douglas batches of Melbourne - has their phone number on the rear.trams, tramways, box hill, badges, lions club

Used for vaginal hysterectomy.Set of metal forceps. Item very broadly resembles a pair of scissors, with two finger grips at one end, and cutting teeth at the other. There is a ratchet on the shaft of the forceps just below the finger grips to lock the forceps into position. The cutting end of the forceps slants away from the body of the forceps at a 45 degree angle, with each forcep blade having five cutting 'teeth'. the End of each blade is rounded at the tip, above the teeth. Engraved text on the forceps reads 'MAYER & MELTZER LONDON'.'MAYER & MELTZER LONDON'

The fishing spot known as The Lodge was accessed, for many years, via private property. This article is about an on site meeting, who attended and what was said in regards to the upgrading of a road for access to the river. Includes a letter to the Editor from Ronald Irvine stating their position. Enquiries made on March 11th 2021 with Ronald Irvine revealed that the road had deteriorated and vehicles were becoming bogged, requiring the farmer to pull them out with a tractor. Council were reluctant to fund repairs and the result was that the gate was locked and public access no longer available.Significant because it is a record of community and government discussion about community access to a popular fishing location on the Curdies River.Two page newspaper article from the Cobden Times March 5 1986peterborough, curdies river, the lodge, ronald irvine, the lodge fishing, timboon anglers club, john irvine, the cobden times, 5 march 1986

The Crane foundry opened some time before 1827 and was known as Atherton’s Foundry, run by James Atherton and Henry Crane. Initially it was a brass foundry, but by 1827 iron castings were also produced on the site. The main products were castings for the building industry, ironmongery and brassware. In the 1830s castings for the hand tool and lock industries were added to the product range and by 1836 Henry Crane had taken control of the business. The company became known as the Crane Foundry in 1847 with its own registered trademark. By the 1850s iron weights were produced, and a design was registered in 1872 with roundels decorating the edge. Brass weights were also produced, mainly after the regulation of 1890 that required weights of 2oz. or less to be made of brass. In the early 1900s the foundry began to produce castings for electric motors and continued to do so throughout its life. The Crane family continued to control the company until 1917 when William Cyril Parkes of lock makers Josiah Parkes & Sons Limited, Willenhall became a majority shareholder. Things were going well until the company’s liabilities spiraled out of control with the rise in electricity and gas prices along with the loss of two of the company’s largest customers. The factory went into liquidation and then closed in 2006 an end to one of Wolverhampton’s oldest companies.An item made by one of England's foundry’s based in Wolverhampton that exported items all over the world for many years. The scale gives a snapshot into the commercial life not only of England by Australian colonial life before Federation.Beam scale with three weights (4lb, 2lb, 1lb), metal tray, corrodedMarked on 2lb weight "Wolverhampton Crane Foundry" flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, scale, beam scale, pounds and ounces, imperial weight, grocers scale, domestic scale, henry crane, crane foundry

This is a mantel clock used probably in the dining room or lounge room of a house. It would have been a common item in a household in the 20th century and was often an heirloom passed down from grandparents. This type of clock is an attractive item and is still regarded as highly desirable today.This clock has no known local significance but is retained as an attractive and historical item and serves as an example of a high quality household object of the past. This is a black wooden clock with a rectangular base with ornamental metal corner pieces and two ornamental gilt metal patterns. The clock has an overhanging rectangular top with two gilt handles on the side. Also on the sides of the lock are two green inset faux columns with two metal ornaments in between. The brass mechanism at the back of the clock has four wheels. The clock face has a glass front, black numbers and metal hands. There is a strip of brass around the outside of the face. There are two key holes on the face. 'Sessions'warrnambool, mantel clock

This is a WW1 stand for mounting a .303 rifle, to train soldiers in shooting.This device consists of two parts; 1. Top part has an adjustable 'arm' . At the end of each arm is a leather covered 'U' section. Under the arm is a large threaded rod and knurled knob, this is to adjust elevation. At the center of the arm is a pivot that can lock into position. This top section is mounted on a tripod, it can be removed. 2. This is a steel tripod made out of 'T' section steel. There are fixed cross braces about 40 cm fom bottom. The top has a tube section within which the upper arm mounts.Marked on one leg is "XXI". Believed to be from 21st Bn. AIF. on the top of that leg is a very small arrow head.ww1, training, .303 rifles

This desk was donated to the MTSV in 2017 by a descendant of Padre Oliver, Chaplain from 1930-1960.This desk belonged to Rodney Oliver and is believed to have been used by Padre Oliver and his wife while Chaplain, and the family resided at the MTS and thereafter in subsequent parish postings. The desk makes a link with one of the longest serving Chaplains who had a significant influence through the intense period of operations early - mid 20th C. The Padre's influence was substantial. The desk is also believed to have been used by son Rodney Oliver who also served the Mission as Chairman in the later 20th C.A four drawer leather topped desk with detachable unit comprising double sliding door lockable cabinet with small bookshelf backed with shallow pediment. Sorting / sectioned pigeonhole interiors to the top cabinets see images. The main table desk appears to be of a different wood with green leather inset to top surface and heavy legs. Drawers with heavily decorated brass handles. The top cabinet features finer cabinetry and darker colour wood or stain which could be cedar.with simple narrow reeded decoration. interior two pigeon holes with labelsfrank leslie oliver, padre oliver, chaplain, desk, mission to seafarers, melbourne, seamen's mission, flinders street, padre frank leslie oliver

This book, a sequel to ‘The Swiss Family Robinson’ by Henry Frith, was a prize given to Frank Ward in 1901. His school, the Warrnambool Academy, was established in 1899 by Richard Lawson and William Oakley and was eventually situated at ‘Upton’ in Canterbury Road, Warrnambool. The Academy later incorporated the former Scott’s Warrnambool College and Stanley’s Warrnambool Grammar School. This private school closed in 1911. William Oakley later joined the Victorian Education Department and Richard Lawson had a distinguished academic career in teacher education in Melbourne and New Zealand. No details are available on Frank Ward. This is a hard cover book of 295 pages. The cover is dark blue with gold printing and ornamental gold borders on the front cover and spine. The book has an introductory chapter, 28 chapters of story and an Epilogue. In the back pages there are lists of other books published by Ward, Lock and Co. The book contains many black and white illustrations. There are two blue stamps of the Warrnambool & District Historical Society and on the first page a flyleaf from the Warrnambool Academy printed with gold print and borders and with handwriting in black ink. The cover is slightly faded and marked. ‘Warrnambool Academy, Labore et Fide, First Prize awarded to Frank Ward for Latin, Principals, Richard Lawson M.A. & W.M. Oakley. 17/12/1901’ warrnambool academy, richard lawson, william oakley, frank ward, history of warrnambool

The anchor is one of four that were carried by the FALLS OF HALLADALE when she was wrecked near Peterborough in 1908. This Rodger’s Anchor was raised from the wreck site by Flagstaff Hill divers (Peter Ronald, Colin Goodall and Gary Hayden) in 1974 and is on permanent outdoor display at the Maritime Village. The imposing 2-tonne artefact required a raft of fourteen 44-gallon drums to raise it from the seabed before it was towed by a crayfish boat to the wharf crane at Port Campbell for loading onto land transport. Following Lieutenant William Rodger’s patent in 1831, anchor design moved away from the separate attachment of straight arms and flat flutes to each side of a long shaft. Rodger’s innovation included the forging of both arms and their flutes as a single uniformly curved piece which was then attached to the crown of the shank by a thick horizontal bolt. The two-inch diameter hole for the securing through-bolt at the crown is clearly visible in this example, the bolt dislodged by corrosion and now missing. The FALLS OF HALLADALE was a four-masted, iron-hulled barque, built by Russell and Co at Greenock in 1866 for the Falls Line of Wright & Breakenridge, Glasgow. The ship was 275 feet long, 42 feet wide, with a 24 feet draft and weighed 2,085 tonnes. She was built to carry as much cargo as possible rather than for speed. Her unmistakably square bilge earned her the title of “warehouse-type” ship and her iron masts and wire rigging enabled her to maintain full sail even in gale conditions. In 1908, with new sails, 29 crew, and 2800 tons of cargo in her hold, the FALLS OF HALLADALE left New York, bound for Melbourne and Sydney via the Cape of Good Hope. 102 days later, at 3 am on the 14th of November, under full sail and in calm seas, with a six knots breeze behind and a misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a shelf of rock near Peterborough. There she stayed for nearly two months until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000-ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four-masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for the Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire.The shipwreck of the FALLS OF HALLADALE is of state significance – Victorian Heritage Register No. S255. She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).A large iron Rodger’s anchor recovered from the wreck of the FALLS OF HALLADALE. It has a rounded crown, curved arms and moulded flutes. Heavy duty iron stock with round eyes at either end, fitted over shank and fixed into position by a wedge-shaped metal locking pin. Shackle missing but severed securing bolt remaining in shank. The presence of an empty bolthole at the crown junction of shank and arms confirms Rodger’s type. Corroded from 66 years submersion in seawater but otherwise structure is sound.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, falls of halladale, rodger’s anchor, peterborough reef, 1908 shipwreck, anchor, last days of sail, great clipper ships

This Eclipse model, treadle operated sewing machine was made by the Oldham Sewing Machine Company in Greater Manchester U.K.. It was used by sailmakers for sewing sails with box shape top and slim neck. Sewing machine, foot treadle, for sewing sails with box shape top and slim neck. Brand is Eclipse. Cast iron base is bolted to square wooden table-top with drawer under table. Drawer has 3 partitions and wood fitting with 5 drilled holes for needle storage, lock has diamond shaped, decorative metal surrounds; half of inside drawer is painted black. Decorative metal stand, painted green, with 2 foot pedals; 1 foot pedal drives the wheel wheel. Padals both have "ECLIPSE" cast into the iron.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, textile machines, sailmaker's machine, maritime sewing machine

Bendigo Advertiser "The way we were" from Wednesday, July 7, 2004. Champions: this group of softballers had plenty to be happy about. This photo, taken in 1946, is of the NCSN softball team which won the premiership. The team is back row: Gertie Sexton ( forbes), Ethel Pearson (Gallagher), Betty Collins (Cannon), Margaret Ryan (Lock), Anne Donnington (Flack), Win Jennings. Front row: Mase Calligan (Purdon), Bernice Mulqueen (Bormeo), Mary Mason (Brosman), Kath Pearson (Pannell) and Rae Domington (Dalty).newspaper, bendigo advertiser, the way we were

The Rev A W Pederick was a chaplain who served in the New Guinea Campaign during WWII. His service included the Kokoda Trail. Brown leather carry case with a brown metal base, a carry handle and two lockable latches on the font. The box has a blue velvet lining. The box holds a paten, diameter 12.0 cm, and a wafer tin which are held in pouches in the lid. Two bottles with cork and silver lids are in fitted compartments inside the box which also contains a small white embroidered cloth. There is embossed gold lettering on the front of the box. The box also holds a letter from the Rev Douglas W Risstrom."CHAPLAIN A. W. PEDERICK" inside the lid: "The gift of the Methodist Padres Auxiliary of Australia"portable communion set, rev a w pederick

Newspaper clipping from The Courier, Ballarat, dated Monday 20/3/1972, titled "SEC 'Building a slum' ". Item with a photo about the proposals of the SEC to convert the former tram depot land to development comprising 16 houses as a built-in slum. The development was considered inappropriate for the area by local residents, who requested a development of 6 lots. Features a photo of the depot building with locked gates and a Security company sign on the gate. One of large group of newspaper cuttings from John Bainbridge, 7/4/02.depot, sale of land, wendouree parade

G. Harper was a saddler and harness maker located at Bath Corner, Charring Cross. He advertised in The Bendigo Advertiser in 1892A brown suitcase with two metal clasps which could be locked. There are two travel stickers, ones a Victorian railways luggage Melbourne Albury which is partly missing, the other is The CHALET MT BUFFALO Nation Park. On the inside of the lid there are two labels one is black with gold letters G. HARPER NEW BAG SHOP Leather Goods & Ladies' Hand Bags Travelling Bags & Trunks Saddler & Harness Maker Charing Cross BENDIGO The other is light blue with black writing, QUALITY Guaranteed M.B. Fibre CASE.182 underlined made in bendigo, suitcase, g. harper saddler and harness maker

Bayonet type used by Australian forces in the first and second world warsBritish Pattern 07 bayonet and scabbard. The hilt has a straight crossguard with a muzzle ring and the grips are plain wood held to the tang with two screw bolts. The pommel is missing its push button locking bolt The polished blade is straight having a single fuller to each side and the riccasso is stamped with MA 1907 over 1. '. The brown leather scabbard has a blued steel chape and tear drop locket. The locket throat edge is stamped 3MD35564. The leather body is marked on the reverse MANGROVITE '44.blade -1907 1 Scabbard -MANGROVITE '44.5/6 rvr

Three photocopied sheets titled "Practical Fault Finding" with hand written notes by Carolyn Dean for Melbourne trams c1980. Covers: Cutting out of motors, power on tram won't start, compressor gauge under 60lbs, Compressor gauge over 90lbs, Locked controller, Bent finger (K35) Bent pole, pole on section insulator, insulated tram and Changing of light fuse. See Reg Item 1944 for the relevant assessment sheet and Reg Item 1935 for a similar list provided for the training school.trams, tramways, mmtb, drivers, tramcars, faults, training

Drivers were highly skilled enginemen. Taking a train from Beech Forest to down to Gellibrand required the train to be controlled at 10 mph (16 km) without running out of air. When a brake application was made the brakes on the locomotive were applied harder than the train brakes. The brakes locked up and the engine would just slide along. Drivers used a retention valve on the loco, then released the loco brakes so as not to wear out the brake shoes. So the train pulled into Gellibrand ready to pull out again after refilling the loco with water.At Gellibrand, a Down goods train is about to depart the station on 14 December 1955. The train consists of the locomotive G42, a louvre van NO, two NQ wagons and a guard's or brake van NC. B/W.gellibrand; colac; beech forest; railway;

The Victorian Branch of the Rats of Tobruk Association was formed on 2nd October 1945. Other branches and sub-branches were established across Australia and a Federal Council was established in 1946. With the passing of the survivors of Tobruk, most branches have been wound up with the exception of the Victorian branch. Since 2012 the Rats of Tobruk Association Inc. has opened up affiliate membership to descendants and relatives of the original "Rats" in order to preserve their legacy. This booklet comes from the collection of Arthur Lock who was a Rat of Tobruk and President of the Association in Albury. He passed away on June 28, 2000.This item is part of a collection of items owned by Arthur Lock, a member of the 2/23rd Battalion, an all-volunteer Second Australian Imperial Force which served as part of the garrison during the Siege of Tobruk, then at El Alamein, New Guinea and Borneo. It has particular local significance as the battalion was know as "Albury's Own" because a large majority of the battalion's initial intake of volunteers came from the Albury–Wodonga region. A small light green booklet setting out the bylaws of the Victorian Branch of the Rats of Tobruk Association, modified in 1990.world war 11, rats of tobruk, rats of tobruk association

Black and white photograph (2 copies- 1 original mounted on cardboard, 1 copy)Typed note on rear of original copy: "Ringwood Methodist Intermediate Christian Endeavour. 1937. Back L to R, Max Williams, Ron Williams, Noel Flentje, Manson McAlpin, Bill Flentje. Front, Jennie Roe (Mrs. J. Dedman), Serine McAlpin (Mrs. E. L. Moore), Mr. D. Roe, Supt., Doris Rutter (Mrs. Lock), Raney Mackinlay (Mrs. S. Peek).

William Jarrold's cottage on left was used by the Police 1858-1860. The Court house and Police precinct (upper right) were opened in 1859-1860 Photographer: J.H. Clark John Henry Clark was the youngest of three boys born to William Henry Clark (1823-1877) and Maria White (1843-1914). He and his brothers, William Charles Clark (1872-1945), Clement Kent Clark (1874-1912) operated a photography business (Clark Bros.) from 25 Thomas Street, Windsor near Prahran during the period c.1894 to 1914. Following death of Clement in September 1912 and their mother in 1914, the Clark Bros business appears to have dissolved, the premises demolished, and a new house was under construction in 1915. John set up business independently in 1914 operating out of 29 Moor Street, Fitzroy where he is registered in the 1914 and 1915 Electoral Rolls. By 1916 John had relocated to Eltham where he continued his practice as a photographer and took many of the early images around the district of Little Eltham. Around 1930 John changed professions and opened a small cobbler's shop in 1931 near the pond opposite Dalton Street adjacent to the Jarrold family cottage. He never married and continued his profession as a bootmaker from this little shop, maintaining a close relationship with Mrs Jarrold for the rest of their lives. His bootmaker shop remains today beside the Whitecloud cottage and is one of only three remaining shops in the area from the early 20th century. There are a couple of images of Eltham taken by Clark Bros. in the Eltham District Historical Society collection, one such example being Hunniford’s Post Office with Miss Anne Hunniford out front (EDHS_00140 - marked on the back of the print, Clark Bros., 25 Thomas St. Windsor), which would date this image between c.1894 and 1914. Other early images of Eltham taken by John Henry Clark are marked on the face “J. H. Clark Photo” and it is assumed these are dated between 1914 and 1930. It is noted that the Grant of Probate for John H Clark of Eltham South dated 5 April 1957 (513/387) records his occupation as "X Photographer".Sepia postcardNotations in biro 'A. Petrie', rest in pencil as follows Telegraph poles show one wire No 1918 Avenue of Honour trees c.1907 Jarrolds house No shop at White Cloud on fence line Police Residence has extensions Chimney on wash house Office Brickwork on stables Lock-up, entry and window end Light lamp - cnr Dalton and Maria streets Surface damage to lower left cornermain road, eltham, maria street, dalton street, william jarrold, jarrold cottage, police residence, courthouse, j.h. clark photo

This photograph was taken in 1945, as WW2 was ending. It shows Orbost men who are members of the Orbost Football Club, their Club trainer, and Club President. Football has always been a strong and well-supported sport in the Orbost district, with two teams in Orbost, another at Newmerella and outlying localities. These days (2023), there is only one club still existing in Orbost with a clubhouse and football field at Lochiel Park.Evidence of Orbost Football Club, 1945A b/w photograph of a group of 20 men wearing jumpers with a logo OFC and two other men in suits. This is a posed photograph with men at the back standing, and men at the front kneeling. It has been taken on a sportsfield. On back of photo: Orbost Football Club 1945. Back row L-R Artie Young (trainer), Alex McDonald, Mac Lock, Rick Railey, Tom Wehner, Bill Murphy, Clarrie Stevens, Ray Smith, Alan Hammond, -------------, Clyde Lynn, Maurice Marshall, John Stoddard (President) Front row L-R ----------------, ----------------, Reg Kettyle, Ray Cooney, George Watson, --------------, Sam Lynn, Jim Lynn, ...Parsonssport, football, orbost football club

A shackle is a U shaped piece of iron closed with a pin across the jaws. It is used for securing anchors to their cables, joining lengths of chain cables and so on. This type of shackle is the same size and shape as an ordinary link of the cable and fits into the snugs of the cable holder when verring or weighing. This Kenter type, chain joining link or shackle would commonly be used with anchor chain in the marine industry for applications such as anchors, moorings and ballast. It is a versatile link that can be opened and closed by removing and re-inserting the taper pin and lead plug, allowing for easy joining and detaching lengths of chain, and for repairing damaged links in chain.This is an example of ship's maritime hardware used in Victoria in the 19500s.Half of a chain joining shackle or joining link, Kenter type , painted blue. Often used as a marine anchor chain link. A complete shackle would comprise an oval shaped loop of thick metal and central metal chock comprises three pieces; two half oval pieces with shaped ends. The pieces are joined by a taper pin diagonally through holes in each piece, then fixed firmly by a lead plug in a hole near the head of the pin. This object is missing its other half, plus the chock and the tapered locking pin.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shackle, joining link, chain joining shackle, anchor chain joining link, marine chain joining link, kenter type chain joining link, marine hardware, kenter chain joining shackle

DCPU (Disruptive Pattern Camouflage Uniform) Work dress jacket - Colours light to dark green through to light to dark brown. Gore-Tex fabric for wet weather. Hood with peak and elastic drawstring with plastic lock clip. Plastic/metal two ended zipper and metal press studs - front fastening. Two front pockets with loop and hook (Velcro) fasteners. Two interior nylon mesh pocket with zipper. Sleeves at wrist - loop and hook adjustable strap. White colour polyester fabric manufacturers label on front zipper. Manufacturers information on label - black ink print. Label 1 "GSSM/www.gssm.com.au/MAR 2008/O/N 248007/ N/S/N 8415 - 66 - 145- 7093/ SIZE:L/ CHEST: 100-110CM /NAME/SERVICE" "CARE INSTRUCTIONS/ MACHINE WASHABLE: 40c/ DO NOT BLEACH/ DO NOT SPIN DRY/ DO NOT WRING/HAND TO DRY/ LIGHT/ COOL IRON/ FABRIC CONTENT/ FACE/LINER: 100% POLYESTER/ LAMINATE: PTFE" Label 2. "BATCH NO./5301011". uniform, army, work dress, dpcu

Items in the collection re Craig Triffett. Refer Cat No 5997.5. for his service details.This is a soldiers back pack with additions. It has the Australian Army Disruptive Pattern, Camouflage markings. it has an upper and lower internal components. On the upper external corners are two fixed pouches. Additions to the back pack are two large ammo pouches and a large water bottle (plastic) and it's carrier. The system uses plastic snap lock catches. The pack has extra bands of 55mm wide webbing, to mount extra items. Loose ends of straps have been rolled up and held with black pvc tape to suit the user.At top, bodyside, is phrase " Hol846".aust army, military backpack

This is a novel written by Ethel Patricia Stonehouse under the name of Lindsay Russell. She was born in Nhill in 1883 and was educated at Charlton State School. From 1894 on she wrote verse and short stories and worked as a journalist in Melbourne. She published her first novel in Melbourne in 1912 and lived for a time in London where she met Dr John Scott whom she married in 1914. After the First World War she came to live at Mortlake and her novel writing ceased. Most of her novels are about women rebelling –against Catholicism, Calvinism, the English class system and the restraints of marriage. Her railings against the Catholic Church and the oppression of women caused her to be a controversial figure, especially in Mortlake, but she was a popular novelist with one of her books, ‘Smouldering Fires’, selling over 100,000 copies in Australia alone. She died in 1964. No details on the inscription or the recipient of the book, ‘Isie’ have been found. The name, ‘Glasgow’ suggests that the book at some stage was connected with the Glasgow family of Wangoom. They were important local dairy farmers and cheese makers in the late 19th and early 20th centuries.This book is of great interest because it was written by an Australian woman and one who lived for many years in Mortlake, a town close to Warrnambool. The connection with the Glasgow family is also of interest. This is a hard cover book of 320 pages. The book has a dark blue cover with gold lettering on the front cover and spine and some gold scroll work on the front cover. The book has a Prologue and 22 chapters and contains advertisements at the front and the back of the book for other books published by Ward, Lock & Co. There is a black and white illustration at the front of the book with a piece of tissue paper covering it. The page at the front of the book that contains an inscription is detached. The inscription and another annotation are written in black ink. The cover is partly detached from the pages and the cover is marked and worn. ‘To Isie Wishing her many happy returns of the day From Father, 15-9-14’ ‘Glasgow’ lindsay russell, ethel stonehouse, history of mortlake, australian literature, warrnambool history

This bayonet and scabbard was made for the Charles Lancaster .577 calibre Oval Bore Carbine and was known as the Pattern 1855 'Sappers and Miners' bayonet because they were designed for use by the Corps of British Royal Sappers & Miners. The first model Sappers and Miners bayonet appeared in 1841 and differs significantly from this type. Pattern 1855 bayonets were issued to some volunteer units of the Victorian defence forces in the late 1850s, Stylised beaked-brass pommel with T- shaped attachment slot. A steel press stud operates the locking catch via a steel leaf spring on right side of hilt. Two-piece black chequered leather grips. Left grip has four small steel rivets, right grip three rivets and the leaf spring securing screw. Brass cross-guard with formed muzzle ring. Long single-edged, pipe backed, quill pointed 24 inch (615mm) steel blade. Original leather scabbard with brass locket and chape.Knight's Head stamping of the German Solingen-based firm Carl Reinhard KIRSCHBAUM bayonet, victorian defence forces, lancaster carbine