Digital image of W2 510 east bound in Collins St, with the King St intersection in the background. Tram showing route 47, Kew Depot. In the background is a RACV station wagon, a policeman on point duty. The tram has adverts for Berec butter, Photo by Dick Jones - reference - 510_CollinSt_DickJones_6711M7.34.62 Buildings as advised by Rod Atkins 11/11/2019 William Angliss Building 528 - 534 Collins street - NE cnr. of King street - since demolished New Zealand Loan & Mercantile Company Ltd. building 538 – 544 Collins Street – NW cnr. of King street. McPhersons Building 546 – 555 Collins Street. Edwards Dunlop and Company Ltd. Building 568 – 580 Collins Street – since demolished.trams, tramways, w2 class, collins st, kew depot, route 47, tram 510

Provides publicity photographs of the prototype PCC tram 1041, that lead to the construction of the Z class trams.Yields information about prototype tram 1041Set of four colour prints and one black and white print of prototype tram 1041 on Riversdale Road, with Wattle Park in the background, second half of 1973, during commissioning and testing phase. .1 - tram showing special and route 000 - has been printed so that the background above the tram has been partly faded. Both printed on Kodak Paper. .2 - tram showing W. Park - Elgar Rod, route 070 - two copies .3 - similar to .2, at different location with park in background. Printed on Kodak paper. .4 - same as .1 - Has PTC copyright stamp on rear and number 3953 - better colour. .5 - black and white print - with PTC stamp and number 3953.tramways, trams, mmtb, prototype tramcar, tram 1041, riversdale road, wattle park

This trophy was used to record the winners of the track seasons during the years 1970 to 1988.Provides a record of the winners of the track seasons between 1970 and 1988.Wooden trophy with gold coloured plaques added with names of trophy winners of the perpetual track trophy engraved on the plaques during the years 1970 - 1988. The wooden trophy is on a wooden base and is in the shape of the top half of a shield with a column of wood in the centre. There is a figure of a cyclist on the top of the trophy."Ian Bush 1970-71/Graeme Dougherty 1971-72/ Bob Bradford 1973-74/ Kevin Salmon 1974-75/Lewis Oliver 1975-76/Graeme Dougherty 1976-77/ Rod Bunting 1977-78/Don Wilson 1978-79/Don Wilson 1979-80/Robert Sawyer 1980-81/Darryl Carson 1981-82/Don Wilson 1982-83/John McDonough 1983-84/Graeme Smith 1984-85/Robert Baulch 1985-86/Bill Dempster 1986-87/G.W.C.C./Jack King/PERPETUAL TRACK TROPHY"ian bush; graeme dougherty; bob bradford; kevin salmon; lewis oliver; rod bunting; don wilson; robert sawyer; darryl carson; john mcdonough; graeme smith; robert baulch; bill dempster; g.w.c.c.; jack king; track trophy;

Diamond Creek Bini Shell Community venue Built in 1979 in Diamond Creek opposite the hotel using a construction method invented by Dante Bini. A net of flexible steel rods were laid on the building’s circular base, on the top of a fabric bladder. Concrete was poured onto the mesh and a sealed cover laid over the concrete making a sandwich of cover, bladder and mesh. Compressed air was pumped into the bladder and the sandwich slowly began to rise and become a massive self-supporting dome. The inflation of the dome attracted crowds of onlookers many from various technical schools, VIPs and the famous football doctor, Donald Cordner. An opening night dinner was held to celebrate the construction and the Diamond Creek Bini Shell was used as a community venue for over ten years including for the Town Fair. The Shell was closed for safety reasons after a Bini Shell in another State had chunks of concrete fall off the dome due to a construction fault. At the Diamond Creek Town Fair in 1991 the demolition of the Bini Shell was an item on the Town Fair’s program. Information: Kevin Patterson, Nillumbik Historical Societybini shell, diamond creek community centre, nu-color-vue, postcard

Part-Time Teachers In Technical and Further Education, Volume Two - Detailed Report on Findings and Recommendations by Gillian Shadwick (Institute of Technical and Adult Teacher Education within the Sydney College of Advanced Education). Published by the Sydney College of Advanced Education and funded by the TAFE Council of the Commonwealth Tertiary Education Commission, June 1986. The steering committee included Greg Woodburne, Dr Rod McDonald, Gary Hilton, Ian Hamilton, Warwick Goodsir, Ray Jolliffe, Sue Hatherley, and Rex Hewitt. The aims of the study were: "1. To provide profile(s) of the part-time TAFE teachers; 2. To determine the extent of the part-time teacher contribution to TAFE's educational provision. 3. To determine the nature of the part-time teacher contribution to TAFE's provision. 4. To identify initial and on-going staff development and teacher-training needs. 5. To describe the superviser: part-time teacher relationship. 6. To identify sources of part-time teacher job satisfaction and job dissatisfaction. 7. To recommend future directions for the contribution of part-time teachers to educational provision within TAFE." These are discussed throughout the report. ISBN 0-86398-035-XBook concerning Part-Time Teachers in Technical and Further Education, a Detailed Report on Findings and Recommendations. 249 Pages. Includes two questionnaires for teachers. Bound with plastic spine, covers made of thicker, textured paper. Sections and appendixes marked with yellow paper.part-time teachers in technical and further education, volume 2, detailed report, gillian shadwick, institute of technical and adult teacher education, 1986, greg woodburne, dr rod mcdonald, gary hilton, ian hamilton, warwick goodsir, ray jolliffe, sue hatherley, rex hewitt, questionnaire, tafe, part-time teachers, teaching

The painting was donated to ANZCA in 1995 by Dr Bernard Dunn. Bruce Fletcher, from Melbourne Victoria, studied under William Dargie, who had been an official war artist during the second world war. Fletcher followed the same pathway as his mentor and was the first of two official war artists appointed during the Vietnam War. His artwork are held in the art collection of the Australin War Memorial, Canberra. The title of the painting, 'Dust Off' is a term adopted in Vietnam which refers to the medical evacuation of sick or wounded soldiers, from the field, by a helicopter. It was originally a radio call sign selected from a US Navy Signal Operations book in 1963. [ref. 'Medicine at War. 1950-1972'].In June 2012, a Royal Children's Hospital Anaesthetic Registrar attended a College Tour conducted by Dr Rod Westhorpe when he saw the painting and informed us that the term 'Dust off' emanates from the Korean War and is in fact the acronym for Decisive, Unwavering, Support to our Fighting Forces'. The painting was based on a black and white photograph taken in Vietnam in 1971. An image of the photograph is located in the electronic supplementary file. Oil painting on board of a scene in which a military helicopter is about to land with a group of soldiers in the foreground, one wounded and one soldier standing. A cargo military helicopter is in the distance flying away from the scene. The painting is set in a gold frame.[plaque affixed to centre front of frame] DUST OFF \ BY BRUCE FLETCHER \ DEPICTING THE MEDICAL EVACUATION \ OF WOUNDED SOLDIERS FROM THE FIELD \ IN VIETNAM \ PRESENTED BY \ DR BERNARD L. DUNNpainting, dunn, bernard, fletcher, bruce, vietnam war, dust off

Hand theatre made "trench art", utilising used artillery brass shell casings, of various calibres, hand made with such "tools" as were available at the time. They have been decoratively trimmed at the mouth of each with a "scalloped" pattern, the shallowest casing mounted on small arms casings as "feet" and the large casing inverted engraved and embossed with a depiction of the Australian Commonwealth Military Forces "Rising Sun" badge.This "Dinner Gong" and "Striker" are significant Historically and Socially, as it is believed to be the only example of a dinner gong and striker made in theatre as contemporary "trench art" by serving members of this group. Around the top of the main part of the Gong are stamped the initials of the Australian members of the Royal Flying Corps at the time, it is of possible National historical significance, as they were such a small group at best, and a highly vulnerable group, quite likely to not survive the conflict. This group and their desendants went on to be a part of the formation of the Australian Flying Corps, the beginings of the Royal Australian Air Force. It relates to the embrionic stages of a part of the now Australian Defence Force.A commemorative Dinner Gong construted from Artillery Shell Casings of various sizes. The largest cut short at the bottom, mounted on rifle or machine gun casings cut short as 'feet'. A slightly smaller diameter inverted as the 'gong' with decorative engravings depicting, a Rising Sun emblem on a decorated back ground, 'AFC' (Australian Flying Corps) crowned wings, on the same decorated back ground. The open ends of these larger casings is 'scalloped' and decorated beautifully, while the closed ends have a 'pie crust effect around the flanged edge. There is a biforcated mount at the top to hold the 'striker' made from white metal ballastered rod with a wooden eliptical knob. On the top around the striker mount are stamped the initials of those believed to be the first Australian Aviators in the then AFC.

The artillery piece of the cannon was cast at the Low Moor foundry in England in 1861. It is a 68 pound muzzle loading cannon, capable of firing a 68 pound weight projectile. The arrow on the top of the barrel is the symbol of government ownership. It is probably one of the artillery pieces purchased by the Victorian government in response to the 1863 report by Captain Scratchley, which recommended 19 such artillery pieces be bought for the defence of Hobsons Bay, (Williamstown, Melbourne) (Billets p.12). It was possibly brought to Warrnambool in the late 1860s or the 1870s, to be used for training purposes by volunteers and local militia. The wrought iron runners were probably added to the slides at a later date. This model of carriage had been manufactured since 1855, and the traversing slide since 1860. The traversing slide of the wooden carriage absorbs the recoil when the gun is then returns to the gun to its original position for loading and re-firing. The properties of the timber (regarded as being Burmese teak) have helped to preserve these carriages in Australia. This particular carriage and traversing slide would have been manufactured about the same time as the gun (in 1861) in the Royal Carriage Department of the Royal Gun Factory in Woolwich, England. The gun would then have been assembled on the traversing slide of the carriage, then despatched as a unit. The wooden slide compressor mechanism that belongs to the cannon was used to limit the recoil when the cannon was fired. It is now stored separately for purposes of preservation. It is extremely rare, as it is the only one surviving in this group of South Western Victorian cannons.This 68 pdr cannon, mounted with its original wooden carriage, is part of the South Western Victoria collection of surviving 19th Century artillery pieces, item number W/F/02. It is rated as EXTREMELY RARE on a State, National and World level. The 68 pound smooth bore cannon of this period are not particularly rare either in Australia or overseas; its significance lies in its Victorian provenance and as an element in a major collection of 19th century cannon. The number of surviving carriages with traversing slides in this group in South Western Victoria is unique in Australia and probably in the World. Out of 10 such platforms surviving in Australia, the South Western Victorian group has half. Several survive around the world but probably not in such a large group. The wooden sliding compressor mechanism belonging to this cannon is extremely rare, and the only one in this South Western Victorian group of Guns and Cannons. As a whole, this cannon has undergone very little restoration or modification, giving it a high level of integrity.Warrnambool Garrison Cannon. 68pdr smoothbore, muzzle-loading, cast-iron cannon. Manufactured in Low Moor, 1861, No. 10310. Mounted on the wooden carriage with wrought iron traversing slide and wrought iron runners and fittings. The cannon's Cascabel is cast with a loop. The wooden slide Compressor Mechanism, or Recoil Mechanism, is extremely rare. This mechanism comprises two equal-sized sections of wood, one on each side of the centre, joined by metal rods. In the centre of this wooden platform, with openings, top and bottom is a 15cm diameter metal cylinder with two cusps on the edge of the top (this wood has split over time). Two parallel sides each have two 1cm thick metal "L' plates attached 15cm long and 8.5cm wide. With the unit is ‘ L’ bracket, curved bracket and bolt head.Cannon trunnion "LOW MOOR / 10310 / 1861" Top of the barrel "7045, (symbol of an arrow pointing up), 95 – 3 – 14, 1861, 209" Cascabel "CV / N / C" The rear of left-hand slide " "OD” “JW” “No 33” Side chock – “JW” twice. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, muzzle loading cannon, 68 pound cannon, low moor foundry, royal gun factory, warrnambool militia, warrnambool garrison volunteers, warrnambool fortifications, wooden sliding compression mechanism, carriage and traversing slide, 19th century cannon, traversing platform, garrison sliding carriage, 68 pounder

Two Colour photographs of hat making equipment,for Heritage Week display at the Local History Centre (former Courthouse), 728 Main Rod Eltham. (Home of Eltham District Historical Society) The equipment was used at the Hat Factory in Eltham which started in the 1940s. The equipment shown includes a mould for making felt hats, stud press, looping machine for berets and hand sewing machine for straw hats. Sign accompanying the display is hand written and reads: "Eltham has not generally been known for manufacturing industry. One factory which started in the 1940s was "the hat factory" in Sherbourne Rd. The equipment displayed here includes moulds for making felt hats, stud press, looping machines for berets, hand sewing machine for straw hats."heritage week, eltham, courthouse, hat factory, hat mould, activities

This sewing machine would have been used by some ladies to mend and make clothes for the family as shops were some distance away and to sew items for Church and School fetes.Used in the Kiewa Valley.Black metal Singer sewing machine with gold decoration and writing on its body and platform. It sits on a wooden tray which is hollow under the body with a separate space on the right hand side. The body of the machine can be lifted by hinges attached at the back. This would enable items to be stored in the hollow part of the box. Similarly the hollow section on the right hand side, which hasn't got a lid. The body has the needle and cotton attachments on the left and a handle for working the machine on the right. There is a metal rod at the top for the cotton reel. The body is attached to the platform at each side forming an arch. The top of the box has metal along its perimeter. At each end of the top of the box there is a plate with a small hollow rectangle in the middle enabling an attachment such as a board to be inserted for an extended bench.Front & back of body: "Singer". and at front on an oval brass plate: "The Singer Manfc. Co." Inside of body on left: "This machine contains / some substitute / parts and accessories" On metal platform on right: "Y3071189" Along top of body: "The Singer Manufacturing Co." On Wood right hand side: "Godfreys Ltd / 57 Gawler Place / Phone 460261 / No. 7063 singer manufacturing co.. sewing. fetes. home duties.

Ballarat University College is a predecessor institution of Federation University AustraliaColour photograph of Ballarat University College Business Graduates taken outside on Mount Helen Campus. Back Row: Scott Alexander, Trent Somers, Evan King, Andrew Cutter, Steve Milojevic, Brad Winfield, Anthony Matthews, Craig Dowling 3rd Row: Darren Hodge, Brett Holloway, Donna Wells, Dale Boucher, Michael Till, Andrew Still, Russell Keenan, Rod Bridger, Phil McFarlane 2nd Row: Jason McGrath, Sue Farmer, Lauretta Clarke, Lavinia Knight, Kerry McPhan, Lisa Watt, Jock Selkirk, Andew Loader, Ashly Ruyg, David Shaw, Monica Yates, Janet Mason Front Row: Stephen Kearney, Kylie Edwards, Jane Anderson, Debbie Lyons, Frank Beyerle, Gerrard Morganballarat university college, business school, scott alexander, trent somers, evan king, andrew cutter, steve milojevic, brad winfield, anthony matthews, craig dowling, darren hodge, brett holloway, donna wells, dale boucher, michael till, andrew still, russell keenan, rod bridger, phil mcfarlane, jason mcgrath, sue farmer, lauretta clarke, lavinia knight, kerry mcphan, lisa watt, jock selkirk, andew loader, ashly ruyg, david shaw, monica yates, janet mason, stephen kearney, kylie edwards, jane anderson, debbie lyons, frank beyerle, gerrard morgan

Part of a Shire streetscape series of photos c. 1987Colour photograph of Turner's Butcher Shop on the corner of Learmonth and High Streets. Sign above the verandah reads Turners Butchery and has a picture of a ram's head between the two words. The signage on side of building reads Specialising in FEEDLOT STEAKS, QUALITY Pork & Lamb, Friendly Service. Deliveries. The sign on the side of the bullnose verandah reads TURNERS Butchery Phone 911506. A sandwich board in front of the shop on the edge of the footpath reads Butcher NOW OPEN. A white station wagon is parked in the yard beside the shop. There are two red and white school crossing posts on the rod in front of the shop. A building is under construction in the block across the road and there is orange safety fencing around the front of the block. The mill silos are visible behind the butcher shop.turner's butcher shop, high st charlton, learmonth st charlton

Coloured photograph of the Golden Square Primary School, Year 5-6/H 1998 class and their teacher. Children are wearing school uniform. Their names are: Back Row, L to R: Leigh Barker, Bethany Thomson, Jessica Gloster, Amy Morrison, Luke Anderson, Seb Robins, Nicole Roberts, Kim Freeman, Justin Broadbent. Middle Row, L to R: Emma Singe, Jessica Middleton, Stevie Blake, Kristy Allen, Emily Boutard, Jedd Fettling, Dearne Rice, Rod Weeks, Khylie Anderson, Megan Bourke, Jill Honey (Teacher). Front Row, L to R: Lachlan Carter, Jeffrey Lewis, Mathew Holmes, Rebecca Stemmer, Kara Braddy, Chris Ohlson, Michelle Noulton, Nathan Hunt, Joshua Clough. Oval sketch of the school on the right of the names.education, primary, golden square laurel st p.s., golden square laurel street p.s. collection - photograph - golden square primary school year 5-6/h 1998, leigh barker, bethany thomson, jessica gloster, amy morrison, luke anderson, seb robins, nicole roberts, kim freeman, justin broadbent, emma singe, jessica middleton, stevie blake, kristy allen, emily boutard, jedd fettling, dearne rice, rod weeks, khylie anderson, megan bourke, jill honey (teacher), lachlan carter, jeffrey lewis, mathew holmes, rebecca stemmer, kara braddy, chris ohlson, michelle noulton, nathan hunt, joshua clough

Amy Huxtable was born at Cheltenham in 1918, to Robert Henry Huxtable and Violet A Dagg. Her father was an installer for an oil company and travelled the State. taking his family with him. She completed her education at the Bendigo High School and later attended the Bendigo Business College, becoming an expert shorthand writer. Her first position was as a copy writer with Radio 3BO, in the mid 1930s. She worked with an advertising agency in Melbourne and then with the Age,newspaper. In 1953, Miss Huxtable was appointed temporarily to succeed Miss E B Millane as social editress of the Bendigo Advertiser, during the latter's absence abroad. In 1956, Amy travelled abroad and on her return in 1957 was appointed permanently as Women's editor, a position she held for twenty-three ears. During her early years with The Advertiser she wrote under the name Toora, but in later years her own name became widely known. Miss Huxtable was well known both in her professional capacity and through a interest and involvement in community activites. She was life governor of the Bendigo Hospital, the Bendigo Home for the Aged, and Mirridong Home for the Blind, she was a member of Soroptimist International and the Business and Professional Women's Club. Amy was also a tireless worker for the spastic society and a strong supporter of the YWCA. When Amy Huxtable died at Mt AJvernia Hospital on 16 January 1980 Mayor Campbell ordered the city flag to be flown at half-mast. "Lowering the flag is the least we can do for such a lady" Cr Campbell said. Douglas Lockwood, editor of the Bendigo Advertiser said, "She was a devot d colleague who gave her craft and her newspaper the kind of service which identified a rare and generous spirit." She was a true professional who decided to make Bendigo her home. More than 300 people packed St Paul's Church for her funeral ervice the bell tolled as the casket was carried from the church. At a ceremony in the Conservatory Gardens on No ember 22 1981 The Amy Huxtable Memorial Committee presented to the City of Bendigo, a garden seat in memory of the late Miss Huxtable. This Bendigo manufactured seat was a fitting tribute to one ofBendigo's most loved and esteemed citizens. All Miss Huxtable's Advertiser articles were microfilmed and presented to the Library by the above committee. Amy Huxtable Memorial Committee - Reports from Meeting - five pages of report and letters. 2808.10a Bereavement Card - thanks from Ruth Lockwood to the committee on the death of her husband Douglas Lockwood, Chairman of the committee. 2808.10b Rear of above card. 2808.10c * Report of the Amy Huxtable Memorial Committee 29/1/1981 held at the office of Miss N. Young * Letter to Andrew Taylor, Superintendent Bendigo City Parks and Gardens, 4/3/1981, in regards to the memorial seat in the Conservatory Gardens. * Reply to above letter from the acting Superintendent Rod Sweetnam, 6/3/1981. * Further letter to Andrew Taylor advising that the seat construction is underway, 13/4/1981 2808.10d * Updated committee signature form to the ANZ Bank, 5/5/1981 history, amy huxtable, bendigo, amy huxtable memorial committee, bendigo conservatory gardens, douglas lockwood

Sign, painted onto a MMTB auxiliary destination board of the type that could hang on the front of a Melbourne tram car with the words "Australian Electric Traction Association Special Car". Used for special tours by the AETA. Metal sign, fitted with metal hanging brackets, riveted to sign on both sides. Manufactured by rolling the outer edges over a 4mm diameter steel rod. Has been painted over a an old sign "Direct to Trotting Showgrounds??? via Abbotsford St 3d". Second sign painted over a sign that had on one side "Via Elsternwick" and "Via Balaclava Road". The signs were received wrapped in part of the "The Age, Thursday March 23 1961" - sample retained - see image 4. Image 5 shows the sign in use on L 104.trams, tramways, aeta, signs, auxiliary board

Wool picking machine designed to separate locks of wool before it is carded and spun. The picker opens the wool’s locks which makes it easier to send the fleece through a carding machine. It does this by teasing the fibres (which can also be done by hand just by pulling the lock structure apart), but a picker does this in bulk and much quicker than what can be done by hand. It is possible to spin fibres directly after the picking stage; however, it is usually more desirable to card and blend them with other fibres. Typically, at a textile mill, a picking machine can separate enough lengths of fibre for a full day’s work after just a single hour. It will also help to remove any vegetation matter or other any unwanted elements that may be present in the wool. The quality of the casting on this machine suggest that it was made locally, either in Australia or New Zealand. Mike Leggett, the donor of the machine, acquired it from New Zealand where the seller said it had been used by his father to pick wool to make hand stuffed horse saddles. Mike attempted to used it a couple of times to pick alpaca hair, but the speed of the attached motor caused damage to the fibres. The motor is thought to be an added attachment, sometime around the 1960s judging by its age, while the machine itself is thought to be dated around the 1920s. The machine works by inserting wool through the rollers. Initially there was a conveyor belt feeder system which was powered by the handle on the side. This conveyor belt has been removed however, most likely due to age and deterioration. Wool is now fed through the initial teeth and is met by a spiked rotating drum which works to separate the fibres. The separated fibres would then complete a loop of the drum before being dispatched somewhere below, around where the motor presently sits, at a rapid rate of speed. Typically this wool will be collected in a closet or large catchment area, as can be seen from the 8:47 minute marker in the linked video (link - https://www.youtube.com/watch?v=kMjx-t3tH3A). It is not apparent how the wool is collected with this machine. Red and green machine with four green legs currently attached to a wooden pallet with wheels for easy movement. The green legs lead up to a red central circular barrel from which many attachments are present. Also present on the wooden pallet is a small black motor which is attached by a rubber belt to the central drum inside the red barrel. The belt spins the wooden drum via a dark red circular plate attached to the side of the drum. On the other side of the red barrel, a green handle extends for turning the picker’s conveyor belt feeder system. Two green walls extend forward from the central red barrel, guarding either side of where the conveyor belt would have been. At the start of these walls is a wooden cylinder, which the conveyor belt would have wrapped around, followed by two interlocking gears which rotate and accept the fed wool. The red roof extends over the central cylinder from here, securing the wool inside and protecting hands from the heavily spiked internal wooden cylinder which rotates and separates (picks) the wool. Extending over the top of this red roof is a green handle which reaches to the back of the machine (not pictured). Here it accepts a weight to ensure pressure is always present for the initial feeder interlocked gear teeth. There are two large gear cogs on the rubber belt side of the machine and 3 small gear cogs on the handle side of the machine, all coloured green. A green handle is also present at the rear of the machine, below the location from which the weight is hanging. A power cable extends from the motor and there are two adjustable metal rods on the top of the machine, the purpose of these rods is presently unknown. Black texter. On top of drum. Wording: HG3707 Wording. Imprint: BRACEWIND BLYN On motor. Wording AEIwool picking, textile manufacturing, wool processing

"MACARONI MANUFACTORY. On the pretty road to the Hepburn Mineral Springs, and not far from where the health-laden waters gush plentifully from the earth, is a two-storied brick it is that Messrs Lucini and Co, carry building, dedicated to the manufacture of macaroni, vermicelli, and the Italians' own especial delight— spaghetti. Here on operations, and Mr Lucini himself was good enough to show the writer around and explain the various proces ses of a manufacture which is little known to Australians. The finest wheat and the mineral waters fresh from the springs are utilised, and by means of a most ingenious machine, the hollow rods of macaroni are turned out in large numbers. Finally, they are packed in boxes and cases, and sent off to the prin cipal agent in Daylesford, Mr J. W. King, who in turn forwards them to all parts of the country. Mr Blackett, thv Govrnment Analyst, writes in most lau datory manner of the productions of the factory, and says that on testing them he found the various sam ples were of excellent quality, and quite equal to any of Italian manufacture. Visitors to the springs should not fail to call in at Messrs Lucini's, which is one of the show places of the district, and will well repay an inspection.A number of women, members of the Lucini family, make macroni and the macaroni factory in Hepburn Springs. lucini, macaroni factory, hepburn springs, spaghetti, macaroni

A Legacy ceremony at the Shrine of Remembrance on 22 April 1988. One of the annual "Anzac Commemoration Ceremony for Students" events, held just prior to ANZAC Day. The ceremony provides a valuable opportunity for students to gain an appreciation of the Anzac spirit, the significance of the Shrine and the meaning of Anzac Day. The photos include Legatees lining up to greet the official party, which included President Alf Argent and the Governor of Victoria, Dr J Davis McCaughey, AC (see 01784). Also the Governor inspecting a group of cadets. The event included a fly past of 4 aircraft and speeches by the president, the Governor and two school children (see 01785). There was a boys choir and girls choir either side of the Shrine steps. And a bugler in red uniform performed (see 01787). Other school children sat on the steps with wreaths to be laid in the inner sanctuary (see 01788). Two Junior Legatees laid wreaths at the Cenotaph on behalf of Junior Legatees (see 01789). The school ceremony was broadcast on ABC TV and Radio for many years. Photos at 01790 show ABC journalist Edwin Maher (in stripy tie) and Rod Rees preparing for the broadcast. Also a close up of President Alf Argent.A record of a ceremony for school students at the Shrine.Colour photo x 6 of an Anzac Commemoration Ceremony for students at the Shrine in 1988.anzac commemoration for students, wreath laying ceremony, governor of victoria, fly past

Details the many components that went to make up a Melbourne cable tram grip. All drawings prepared by the MMTB. The second set has more components, generally bolts. See pdf files cable grip part 1, part 2 and part 3 for full details. R3485 - General Arrangement - provides a list of the parts Index - lists all the parts and relevant drawing number R3486 - Cable Grip Lever R3487 - Cable Grip Palm Handle R3488 - Cable Grip Pawl Rod Bracket and Bolt R3493 - Pawl Box, Guard Plate and Bolt R3494 - Pawl Latch Bracket R3496 - Adjusting Screw R3498 - Cable Grip Socket R3499 - Shoe and Shoe screws R3501 - Cable Grip Link R3502 - Quadrant R3503 - Crossbar R3504 - Slide and Slide end R3505 - Cheek R3506 - Protection Piece R3510 - Top Die Holder R3511 - Back Guard R3512 - Die R3513 - Bottom Die Holder R3514 - Sole Plate R3515 - Sheave R3518 - Swinger R3519 - Swinger Frame and Setscrew R3525 - Top Guide Plate R3534 - Sheave Protector R3535 - Sheave Centre R3541 - Hornbar WasherSet of 31 blueprint drawings within a brown paper folder and two brass fold back pins securing the drawings. Second copy - set of 38 drawings, black and white, loose in a sleeve. Has Mr Pratt on front cover. Date Stamped "6 Mar. 1934"trams, tramways, cable trams, cable grip, mmtb, lists

A photo from a newsletter from September 1953. The photo shows the Kew boys class, which met at the Kew Drill Hall on corner of High Street and Highbury Grove, Kew on Friday nights at 7.30. The instructors were Messrs Tom Mann and Jack Costello and has 53 members Front row: Eddie Robertson. Seated: John Linton, Bob Bateson, Robin Broderick, Michael Johnson, Tom Olsen, Graeme Murray, Douglas Govey. Centre: Mr Tom Man (Instructor), Legatee HJ Martin, Legatee AR Beattie, Mr J Costello (Instructor). Back: John Barker, Kerry Wisdom, Garry Thompson, Gerald Brown, Rod MacKinnon, John Shaw, Graeme Withers. Other names mentioned in the article include new boys, Alan Bateson, Douglas Govey, John Linton, Robert Bateson, Evan Houston, Robert Ritchie, Robin Broderick, John Huxtable. It also gives the phone numbers of Legatees AR Beattie, HJ Martin, A Crawford and RS Isherwood in case a reader would like their son to attend a class. The article mentions that the photos of the boys classes were donated to Legacy by Mr John Beckett of Sandringham. Individual photos being catalogued to record detail about each one.The newsletter outlining news of Junior Legatee activities with mentions of boys by name.Black and white photo of the Kew boys class printed in a newsletter in September 1953.junior legatees, boys classes

A compilation of the WW1 service records of 20 local men who enlisted for WW1. Collected by Julie Jones, Heritage Officer, Whitehorse City Council in 2015 for a display of Art Space, Box Hill Town Hall to commemorate 100 years of the ANZAC spirit including card files of the City of Whitehorse used by the consulting historians of 'Way Back When' in collaboration with the local Australia Calls working party to chronicle the experience of our local community.A compilation of the WW1 service records of 20 local men who enlisted for WW1. world war 1914-1918, phillips annette, hore pamela, clifton david, winn patricia, moulden neville, gilbert rod, anderson philip, reen jennie, sayle adrian, flanagan joanne, cox george, whitehead paul, fisher bruce, balderson loris grace, mcgrath stephen, bryant doreen

Canvas stretchers were portable and easily carried by pack horses. They were more luxurious than a hard wooden bed or the ground. Canvas was the best material to use at the time. This canvas stretcher may have been used on camping trips or by the cattlemen when visiting their huts on the Bogong High Plains.Used as a stretcher or camp bed and is very heavy. It is made of wood and 4 pieces of canvas sewn together. It has sides of elongated cubed wood with 4 handle extensions which are also cubed wood partly carved out near their ends for a more comfortable grip. The top has canvas attached to the wooden sides. The bottom has wood attached including the handles and a piece in the middle. Also attached are 4 steel rollers. A nail sticks out and stops the handles from going any further than the rollers. 4 metal strips are also attached for guidance of the sliding handles. 2 metal flat rods are attached to the sides at each end and joined in the middle by hinged nail enabling movement creating a metal strip at right angles to the length of the stretcher. The metal handles are attached here too. stretcher. bogong high plains. camping. sleeping.

Copy negative of an illustration of cable cars in Elizabeth St at the corner with Collins St. Has the Elizabeth St station n the view, along with Craigs and the Royal Bank. Rod Atkins advised 24/08/2020: "Dates from around 1914. taken 11.53 am in high summer. The Flinders Street Railway station looks complete but we still have all the telephone cables on poles in both Elizabeth and Collins Streets. I don't know the year they all went underground. We have two standard "Fitzroy" trams in Collins Street and one West Melbourne tram with standard eight window trailer - no bogie trailers in the photo. Some of the West Melbourne trailers were still six window cars in the 1920's. The major building in the photo is the "Royal Bank" on the South East Cnr. of Collins and Elizabeth Street. "trams, tramways, cable trams, collins st, elizabeth st

This metal travelling trunk belonged to David and Alice Ellis, a young couple married in Dublin in 1855. They left for Australia on the Schomberg clipper ship on October 6 that same year, joining the other passengers for the luxury sailing ship’s first voyage, bound for Melbourne, Australia. The Schomberg was grounded on a sand spit near Peterborough. All passengers and crew were safely rescued. They had been allowed to take something small with them when leaving the sinking vessel, and as such, Alice took a small can basket and coin purse. The metal trunk was also amongst the couple’s possessions, along with a pair of candlesticks and a Bible. Their trunk was later retrieved from the ship’s deck by the crew of a steamer sent from Melbourne. At that time, David was 23 years old (born in Wales, in 1832) and Alice was 26 (born in Ireland, 1829). The couple lived in Tasmania for a short period before settling in the Western Districts of Victoria. David worked as a gardener and, when land in the area was available to purchase, David and Alice claimed a selection on Noorat Road near Terang. They settled there for the remainder of their lives, expanding the property that they named, ‘Allambah’, and had six children. David died in 1911, aged 79, and Alice passed away the following year, aged 83. B, B & B. Brand: - The company was renowned for its strongly constructed and high-quality travel goods. In 1906 the company was sold and renamed Buffalo Trunk Manufacturing Co. Interestingly, the trunk maker’s promise on its printed label is certainly fulfilled: - "B B BRAND. These Goods are manufactured of the best steel sheets, and are guaranteed to give every satisfaction, and will last for years."David and Alice Ellis’s donated possessions have great significance as a group of personal belongings saved from the sinking luxury clipper ship, the Schomberg, in 1855. The strong, well-crafted metal trunk is an example of high-quality travel luggage owned by newlyweds on their journey to a new life across the world. The well-made trunk is a rare shape. It joins Flagstaff Hill’s collection of artefacts from the Schomberg shipwreck, which is listed on the Victorian Heritage Register (VHR S612). The ship has historical significance as a rare example of a large, fast clipper ship on the England to Australia run, built to carry emigrants at the time of the Victorian gold rush. The ship’s design included the technical advances needed to break sailing records between Europe and Australia. The relationship of the objects in Flagstaff Hill’s Schomberg collection allows has potential interpretation of the story of the Schomberg. The collection of objects is archaeologically significant as the remains of an international passenger ship, as it represents aspects of Victoria’s shipping history, in addition to its association with the shipwreck and the ship.Traveller's metal trunk; small brown woodgrain patterned trunk with dark red features and brass lock. This well-made strong and sturdy piece of secure hand luggage has rounded corners and sides, with the ends of the lid slightly bulbous. The lid is reinforced inside across the centre. The lid and sides have dark red metal D-shaped handles that fold down. The two hinges on the lid have their fittings inside the trunk which is hinged across the back. Two dark red painted latches secure the front along with a brass rod and lockable latch in the centre front. The metal is shaped with a group of corrugated ribs on each side of the centre, around the trunk. A white printed and lacquered label is inside the lid and has additional handwritten text. The truck was the luggage of David and Alice Ellis on the sailing ship SCHOMBERG in 1855. Printed on the label: "B B BRAND./ These Goods are manufactured of the best / steel sheets, and are guaranteed to give every / satisfaction, and will last for years." Handwritten on the label: "8/3- 7/-" (possibly meaning Eight shillings and three pence, Seven shillings)flagstaff hill maritime museum and village, great ocean road, shipwreck coast, schomberg, sailing ship, 1855, david and alice ellis, schomberg passengers, b b brand, american made, traveller's trunk, hand luggage, metal trunk, schomberg ship, 1855 shipwreck, peterborough shipwreck, ss queen, david ellis, alice ellis, allambah terang, dublin emigrants, terang presbyterian church, western district victoria, antique trunk, vintage trunk, travel goods, travelling trunk, steel trunk, tin trunk, schomberg trunk, newlyweds, b b & b, boyd boyd & boyd, pittsburgh, rare shape, luggage, vintage luggage, victorian era, travel trunk, three locks, steamer trunk

This photograph is held in the Ballaarat Mechanics' Institute Audio Visual Collection. Please contact BMI for all print and usage inquiries. Norma Lillian Henshall nee Sterritt biography (by son in law Rod Sharp) Norma was born on the 14th November 1912. She was a forward and independent child and always did what others would not consider appropriate at that time and you could say she was a hit of a rebel. Norma worked in Fairweather's in Pleasant Street and while she was there was taught to drive. She later drove Fairweather's Taxi being one of the first ladies to do so in Ballarat. Norma put her age up from 17 to 18 so she could get her license earlier and purchased an Austin 7 red sports car complete with a fishtail back. Norma taught herself the fundamentals of developing photographs and in 1938 rode her man's bicycle around Ballarat taking photographs of the various businesses decorated to celebrate the centenary of Ballarat. During the Second World War with her husband serving overseas in the Middle East Norma enlisted in the Army and served from 1942 through until 1945 as an Ambulance driver in the 3rd Ambulance and was stationed at Camp Pell which was located adjacent to the Melbourne Zoo. Norma transported wounded servicemen to the various hospitals around Melbourne.ballarat, sterritt, driver, ambulance, ww2

This photograph is held in the Ballaarat Mechanics' Institute Audio Visual Collection. Please contact BMI for all print and usage inquiries. Norma Lillian Henshall nee Sterritt biography (by son in law Rod Sharp) Norma was born on the 14th November 1912. She was a forward and independent child and always did what others would not consider appropriate at that time and you could say she was a hit of a rebel. Norma worked in Fairweather's in Pleasant Street and while she was there was taught to drive. She later drove Fairweather's Taxi being one of the first ladies to do so in Ballarat. Norma put her age up from 17 to 18 so she could get her license earlier and purchased an Austin 7 red sports car complete with a fishtail back. Norma taught herself the fundamentals of developing photographs and in 1938 rode her man's bicycle around Ballarat taking photographs of the various businesses decorated to celebrate the centenary of Ballarat. During the Second World War with her husband serving overseas in the Middle East Norma enlisted in the Army and served from 1942 through until 1945 as an Ambulance driver in the 3rd Ambulance and was stationed at Camp Pell which was located adjacent to the Melbourne Zoo. Norma transported wounded servicemen to the various hospitals around Melbourne.ballarat, centenary, floral festival, 1938, sterritt, sturt st, unicorn hotel

This photograph is held in the Ballaarat Mechanics' Institute Audio Visual Collection. Please contact BMI for all print and usage inquiries. Norma Lillian Henshall nee Sterritt biography (by son in law Rod Sharp) Norma was born on the 14th November 1912. She was a forward and independent child and always did what others would not consider appropriate at that time and you could say she was a hit of a rebel. Norma worked in Fairweather's in Pleasant Street and while she was there was taught to drive. She later drove Fairweather's Taxi being one of the first ladies to do so in Ballarat. Norma put her age up from 17 to 18 so she could get her license earlier and purchased an Austin 7 red sports car complete with a fishtail back. Norma taught herself the fundamentals of developing photographs and in 1938 rode her man's bicycle around Ballarat taking photographs of the various businesses decorated to celebrate the centenary of Ballarat. During the Second World War with her husband serving overseas in the Middle East Norma enlisted in the Army and served from 1942 through until 1945 as an Ambulance driver in the 3rd Ambulance and was stationed at Camp Pell which was located adjacent to the Melbourne Zoo. Norma transported wounded servicemen to the various hospitals around Melbourne.ballarat, centenary, floral festival, 1938, sterritt, fire station, sturt st

This photograph is held in the Ballaarat Mechanics' Institute Audio Visual Collection. Please contact BMI for all print and usage inquiries. Norma Lillian Henshall nee Sterritt biography (by son in law Rod Sharp) Norma was born on the 14th November 1912. She was a forward and independent child and always did what others would not consider appropriate at that time and you could say she was a hit of a rebel. Norma worked in Fairweather's in Pleasant Street and while she was there was taught to drive. She later drove Fairweather's Taxi being one of the first ladies to do so in Ballarat. Norma put her age up from 17 to 18 so she could get her license earlier and purchased an Austin 7 red sports car complete with a fishtail back. Norma taught herself the fundamentals of developing photographs and in 1938 rode her man's bicycle around Ballarat taking photographs of the various businesses decorated to celebrate the centenary of Ballarat. During the Second World War with her husband serving overseas in the Middle East Norma enlisted in the Army and served from 1942 through until 1945 as an Ambulance driver in the 3rd Ambulance and was stationed at Camp Pell which was located adjacent to the Melbourne Zoo. Norma transported wounded servicemen to the various hospitals around Melbourne.ballarat, norma sterritt, pipe band, labor day, 1954

This photograph is held in the Ballaarat Mechanics' Institute Audio Visual Collection. Please contact BMI for all print and usage inquiries. Norma Lillian Henshall nee Sterritt biography (by son in law Rod Sharp) Norma was born on the 14th November 1912. She was a forward and independent child and always did what others would not consider appropriate at that time and you could say she was a hit of a rebel. Norma worked in Fairweather's in Pleasant Street and while she was there was taught to drive. She later drove Fairweather's Taxi being one of the first ladies to do so in Ballarat. Norma put her age up from 17 to 18 so she could get her license earlier and purchased an Austin 7 red sports car complete with a fishtail back. Norma taught herself the fundamentals of developing photographs and in 1938 rode her man's bicycle around Ballarat taking photographs of the various businesses decorated to celebrate the centenary of Ballarat. During the Second World War with her husband serving overseas in the Middle East Norma enlisted in the Army and served from 1942 through until 1945 as an Ambulance driver in the 3rd Ambulance and was stationed at Camp Pell which was located adjacent to the Melbourne Zoo. Norma transported wounded servicemen to the various hospitals around Melbourne.ballarat, norma sterritt, begonia, festival, 1954

St Patrick's Cathedral Hall was erected in 1900 to the architectural plans of Clegg, Kell and Miller. The builder was Peter Bodger. The Cathedral Hall is a massive structure in the Gothic manner, with slender proportions and Gothic window detailing. The main hipped roof of the hall is intersected on both sides by four gables, and the front ridge is intersected by two further gables to form the street elevation. Internally the hall resembles many town halls except for the two tiers of Gothic windows and the manner in which the ceiling curves downward towards the walls. Pointed Gothic windows on the upper level intersect the curved ceiling in a simple groined junction. The plaster ceiling is coffered by intersecting beams, while a central skylight floods the hall with natural light. Other features of note are the ridging on the front gables, and the iron bell tower framed in steel angles and braced with criss-crossed rods, complete with a huge wheel and a great bell. St Patrick's Hall demonstrates a notable application of decorative schemes, particularly its highly decorated ceiling which has few parallels amongst other church halls in Victoria. The hall is in an important location as part of St Patrick's complex, as well as part of the group of churches which include St Andrew's Kirk and the former Baptist Church, opposite in Dawson Street. (http://stpatscathedral.weebly.com/cathedral-hall--presbytery.html, accessed 13 November 2013.A series of colour digital photographs showing a large red brick hall associated with St Patrick's Cathedral, Ballarat. The bell tower is situated to the right of the hall.ballarat irish, st patrick's cathedral hall, cathedral hall ballarat, bell, bell tower