This style of geared drill was commonly referred to as an egg-beater drill and was first patented in 1838. During the late 19th century these drills became more common due to the development of mass production. Users also began to mount the drill onto a frame. This allowed greater control over the drill and removed the need to be holding it in both hands. This gave the operater greater control over the item to be drilled. The drill could be easily removed when required. This item is an example of a domestic woodworking tool commonly used before the widespread use of power tools. The construction of the basic wooden frame also demonstrates the ingenuity of early pioneers and tradesmen in adapting tools to suit their own needs.A metal hand drill which has been mounted on to an improvised wooden stand. hand tools, mass production, egg beater drills

Used by Manning Chemist, Flinders Street Railway Station, Melbourne until 1984.Chest of 16 varnished wooden drawers with metal knobs in 2 vertical rows of 8 each side. The 2 bottom drawers larger than the rest, with makers label on plywood back..On label on back Gill Grand Rapids Patented Equipment, Customer : Manning, Job No. 3/105.For use in section:..., Quantity:.., Article : Drawer Unit 'A' T.S.Gill & Son Limited, East Preston, N.18, Victoria, Aust.

The Mother Hubbard Roller Washboard was the hottest selling door-to-door item in America in the early 1900s. Its patented design featured threaded maple rollers that rolled in opposite directions. The touch could be light because the screw threads did all the work. It carried the Good Housekeeping Seal of Approval. The first roller washboard was made in Dover Illinois by the Hubbard brothers who ran their large sawmill there in the town where they were born. As the sales began coming in, they moved their plant in 1904 to LaMoille for better shipping facilities. In 1916 the sawmill was moved to Mendota Ill. and in addition to the washboards, the plant specialized in sawing walnut logs and forming them into roughs for gun stocks. All during the 1920s, the Mother Hubbard Washboard factory was a busy place. The boards were not made after 1935 once the electric washing machine became popular. This washboard appears to be a variation on the Hubbard system to get around their patented protection for washboards with rollers, the rollers appear to be made from maple indicating an American Manufacturer. The manufacturer of the subject item is unclear at this time.An unusual washboard with horizontal flutes designed to circumvent the Hubbard Brothers patent for washboards with rollers and vertical flutes. It makes the item rare and possibly made in Australia early 1900s and gives insight into how various companies tried to improve or get around other manufactures patented designs.Wooden washboard with rotating fluted rollers rectangular in shape and has 2 legsNoneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, washing equipment, washboard, hubbard brothers, domestic laundry

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

Edison cylinders were the earliest commercial medium for recording and reproducing sound. These hollow cylindrical objects have an audio recording engraved on the outside surface which can be reproduced when they are played on a mechanical cylinder phonograph. Beginning in 1889, pre-recorded wax cylinders were marketed. These have professionally made recordings of songs, instrumental music or humorous monologues in their grooves. The earliest cylinders were made from soft wax and later hard wax was utilised. Further developments by several companies, led to the introduction of celluloid cylinders. In late 1908, Thomas Edison had introduced wax cylinders that played for about four minutes (instead of the usual two) under the Amberol brand. The Amberols were manufactured with flat rim-ends, to prevent confusion with the earlier bevel-edged two-minute version. In 1912, the Edison company eventually acquired patents to the celluloid technology, and almost immediately started production under new brand as Edison Blue Amberol Records. Cylinder records continued to compete with the growing disc record market into the 1910s. In 1912, Columbia Records, which had been selling both discs and cylinders, dropped the cylinder format, while Edison introduced his Diamond Disc format, played with a diamond stylus. From 1915, new Edison cylinders were re-recordings from Edison discs. Although his cylinders continued to be sold in steadily dwindling quantities, Edison continued to support the owners of cylinder phonographs by making new titles available in that format until the company ceased manufacturing all records and phonographs in November 1929.This item is significant because it is representative of home entertainment in the late 19th and early 20th century.Two phonograph cylinders in cardboard boxes. The first cylinder is an earlier 2 minute Edison Gold Moulded Record with Issue Number 9184. It features a recording of "Paddle your own Canoe" by Arthur F. Collins and Byron G. Harlan and was released in January 1906. The second cylinder is a 4 minute Edison Amberol Record (NO. 647) featuring the Levy-Athan Polka performed by Charles Daab on xylophone and accompanied by an orchestra. It was released in February 1911. The case is cylindrical in shape and made of cardboard. It is coloured green, white, and black on the outside, while the base is not coloured. The tube is open at the top, and sealed at the base. Inside the tube is a white fabric lining. The top section of the outside of the tube is dark green. Below this is an outer sleeve. The outer sleeve has a half white, half green background with a black stripe, with gold outline, running horizontally around the top and bottom. The words "Thomas A. Edison" are printed in green cursive along the band. In the centre of the sleeve is the text " EDISON AMBEROL RECORD FOUR MINUTE" in green ink. To the left of that text is a green-toned image of Thomas Edison in an ornate, gold border. This is surrounded by the words “Copyright 1900 by the National Phonograph Co. Orange N.J. U.S.A". To the right of the text is a rectangular text box with a black border, which contains patent information in green text. edison phonograph, home entertainment, music early 20th century

A clothes iron is used, when heated, to press clothes to remove wrinkles and creases.The early irons were heated over a stove or in a fire. Irons were used very early in time and cast-iron irons during the 18th century. Mrs. Potts invented many irons starting from an early age thus making a difference to the clothing industry. She invented clothes irons with detachable wooden handles. Her first patent was in October 1870.This iron was used in the Kiewa Valley.Vintage cast iron body invented by Mrs Mary Florence Potts 1890s to 1940s. Detachable wooden handle (not attached) was cooler than a metal handle. It is double pointed for ironing in both directions. Body is hollow the top part being held by two screws. It can be filled with a light material. The No. 1 size is for specific ironing task. compared with No. 2 or No. 3. One handle with other bases enabled some to be reheating while using one. This iron has a stand. Formerly KV88B)Mrs Potts / No. 1 / Iron"" embossed on the topmary florence potts iron, cast iron, laundry, mrs potts

Booklet published by the Melbourne Tramways Trust outlining its operations to Oct. 1888. Gives details on the formation, Trust members, Committee, motive power, Officers, agreements, Acts, description of the cable system including materials, relocation of services, horse or cable, contracts, engines and boilers, issues with patents, and dates of opening of lines to 26/10/1888. Gives details of each line, contracts, engine houses, issues, including horse tramways with some notes on finance.Yields information about the construction of Melbourne Cable tramways to 10/1888.Booklet - 48 pages stapled and glued within light manila coloured cover.tramways, cable trams, mtt, mtoco, track construction, engine houses

The design of the corkscrew may have been derived from the gun worm, which was a device from at least the early 1630s, used by men to remove unspent charges from a musket's barrel in a similar fashion. The corkscrew is possibly an English invention, due to the tradition of beer and cider, and the 'Treatise on Cider' by John Worlidge in 1676 describes "binning of tightly corked cider bottles on their sides", although the earliest reference to a corkscrew is, "steel worm used for the drawing of Corks out of Bottles" from 1681. In 1795, the first corkscrew patent was granted to the Reverend Samuel Henshall, in England. The clergyman affixed a simple disc, now known as the Henshall Button, between the worm and the shank. The disc prevents the worm from going too deep into the cork, forces the cork to turn with the turning of the crosspiece, and thus breaks the adhesion between the cork and the neck of the bottle. The disc is designed and manufactured slightly concave on the underside, which compresses the top of the cork and helps keep it from breaking apart. The winged corkscrew, sometimes called a cork extractor, butterfly corkscrew, owl corkscrew, Indian corkscrew, or angel corkscrew, has two levers, one on either side of the worm. As the worm is twisted into the cork, the levers are raised. Pushing down the levers draws the cork from the bottle in one smooth motion. The most common design has a rack and pinion connecting the levers to the body. The head of the central shaft is frequently modified to form a bottle opener, or foil cutter, increasing the utility of the device. Corkscrews of this design are particularly popular in household use. In 1880, William Burton Baker was issued British Patent No. 2950 for his double lever corkscrew, with both levers sliding onto the upper end of the shank. The first American patent was in 1930 granted to the Italian Domenico Rosati who emigrated to Chicago, Illinois, to work as bartender before prohibition. Rosati's design had an exposed rack and pinion mechanism. Such design was adapted by other brands as the wine-market grew in popularity. The winged owl version, with two side-plates covering the rack and pinion mechanism, was first designed and manufactured in 1932 by the Spanish industrial designer David Olañeta for his brand BOJ and was later adopted by others, such as the 1936 US Patent No. 98,968 by Richard Smythe marked HOOTCH-OWL https://en.wikipedia.org/wiki/CorkscrewThis object is significant as an example of an item in common use in the 19th and early 20th centuries, and that was developed further in the 1930s.Winged corkscrew with a T-shaped wooden handle, metal spring and worm-wheel screw section.None.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, corkscrew, beverages, kitchen equipment, bottle opener

Used by Ettore Alessandri who came to Australia in 1930's. He had land at Marlo and used this jack to clear the property of trees and stumps in 1940's and 1950's. The Trewhella Monkey jack was invented by the Trewhella brothers to help land clearance in Australia during the 1880's. Two jacks were made a 5 ton and a 10 ton. This item is a 10 ton model having two extension bars. The longer spear is used for larger tree work and the smaller spear for general work and small trees. Both models had two lifting claws at different heights. Th lower claw was useful for roots. The top claw was intended for going under loads and the bottom claw used for rolling timber. In 1929 the cost of the 10 ton model was thirteen pounds ten shillings.This item is an example of the machinery used by the early settlers to clear land. A 10 ton monkey jack. It has two extensions (spears) and two lifting claws. It has a detachable handle. 2033.1 is the main jack. 2033.2 is the handle. 2033.3 is the shorter extension and 2033.4 is the longer extension.On extension - BRITISH STEEL On main section - 10 TON MONKEY JACK PATENTED 1411-50 AUGUST 04 1412-50 AUGUST -05 ?????? JUL -06 12104-20 JUL-08 Trewalla Bros Trentham Vicrural monkey-jack trewhella agriculture machinery

This product first manufactured in 1908 however this item was manufactured circa 1920-1930 and marketed as waterproof and free from acid of any description.The requirement of users to be acid free was a historical first for this type of product. Consumer awareness and demand for a better product information statement was at its infant stage and the fore front of modern consumer legislation.Rusted round tin container, originally contained shoe or boot polish manufactured by Nugget.Outside tin trade marked "nugget waterproof black polish (unequalled) free from acid or any description preserving leather from cracking. for patent, glace kid, box calf and other leathers" manufactured in Williamstown Australiacleaning polish, boots and shoes, early consumer warranty

Advertising posters for unbreakable condenser bobbins, produced by Hearl Heaton and Sons Ltd.The New Patent / UNBREAKABLE / CONDENSER / BOBBIN / The Result of 100 Years' Experience. / Perfectly Simple! / Simply Perfect! / Over / Half-a-Million / in use. / Because it is the BEST / it costs a few pence / more than some others - / BUT it saves SHILLhearl heaton and sons ltd

Used in kitchen to cut carrots, cheese slices, onions. boiled eggs, etc.Painted black guillotine on a wooden stand. An iron pole keeps the guillotine in vertical position at one end of the block. Driven by two wheels when a handle is turned. A tilting beam moves the guillotine up and down to cut vegetables, etc. Blade 18cm long by 6.5cm wide. Metal plate missing under blade. A rotatable drum to contain the food to be chopped, which is rotated by a cog at the base (also missing) turns the container. The upright holding chopper blade e is a modification made because of the missing container.|The following description is from Ken Turner Booklet referred to under 'Reference'. ----|The Starrett food chopper would certainly have to be considered one of the more interesting inventions, which incidentally is now considered the ultimate in kitchen collectables. Laroy Starrett in later years' told of how the design of his food chopper was inspired by the action of the walking beam engine used on the Mississippi steam boats. When the crank handle of the chopper is turned, this sets in motion a mechanism which is just fascinating to watch. The crank activates a flywheel which in turn, by a series of cogs and levers, simultaneously rotates a food holding container and raises and lowers within the rotating container, a guillotine like 'chopping blade - the action does not only look like that of a beam steam engine, it even in a way sounds like one, although somewhat noisier. Starrett produced seven different models of these choppers, ranging in size appropriate for domestic use to heavy duty models for butchers, restaurants and for hotel use. The small model was capable of chopping 3lbs in three minutes, and the largest had a capacity for chopping something like 100 lbs in an hour. The mechanical chopper, which became affectionately known as the 'hasher', was the first of some one hundred of Starrett's inventions, and these include a washing machine patented in 1865 which had a similar action to his food chopper, a food press patented in 1873, and a device for lacing shoes he patented in 1886.domestic items, food preparation

Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. The detachable insulated handle was designed to be always cool for ironing. The handle was detachable, so that several irons could be on the stove at one time and the handle swapped between several bodies. This handle appears to belong to a Mrs Potts' sad iron - Reg. No. 1885. This item is an example of an invention that was universally adopted because it meant that users could keep several irons on the stove at one time and the handle swapped when needed. The original Mrs Potts irons had handles made of wood (walnut) and this enabled the user to us the iron without sustaining burns. The item reminds us of the difficult circumstances experienced in their daily routines by the early families in Orbost A wooden handle which has been painted green. The base is made of cast aluminium and is attached to the handle by two screws ( not original). In the base is a hinged piece for attaching to the iron, held to the base plate by a spring and operated by a wooden knob for quick release. A hook holds the handle to the iron.On the base is an indecipherable number.handle sad-iron flat-iron mrs-potts domestic laundry

The first spring balance in Britain was made around 1770 by Richard Salter of Bilston, near Wolverhampton. He and his nephews John & George, founded the firm of George Salter & Co., still notable makers of scales and balances, who in 1838 patented the spring balance. They also applied the same spring balance principle to steam locomotive safety valves, replacing the earlier deadweight valves. https://en.wikipedia.org/wiki/Spring_scale Today, spring scales are very popular with recreational fishers. The ability to weigh things reasonably accurately with a small inexpensive apparatus allowed for the exact weight of items to be ascertained. However, it was not accurate enough to weigh small amounts in ounces or grams.Scale. Has ring for hanging, spring and hook device for weighing. Measures in lbs.Scale of pounds weight.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Established in 1906, Frank Moore soon became well known amongst discerning tradespeople for the quality & accuracy of his tools. The Company was acquired by John Shaw & Son in 1945 & James Neill & Co in 1970. Currently part of the Bower Meteorology UK Group, they still produce superb tools & measuring instruments in Sheffield. The subject item is made from high-grade carbon silver tool steel with the patented 'Firm Lock' joint, that identifies the maker as Moore & Wright.A tool used for external measurement of items made by a maker who patented the "firm lock" jointing system now used on many different types of tools in many different industries. These items are now collectible and quite rare as a result are sought by tool collectors in the USA and UK.‘Firm Joint’ external measuring calipers believed made by Moore & Wright. Impressed into the metal "L A J S" (Probably the owner and company that used the item nothing to do with manufacturing) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, calipers, callipers, external calipers, outer caliper, pottery tools, masonry tools, glass making tools, external measurement

This small medicine glass has ho manufacturer's or owner's marks. It has no side seams, the base is slightly concave, the embossed inscriptions are inside the glass, the clear glass has slight imperfections and ripples, and the glass is slightly opaque below the lip; these features point to the glass being blown into a mould, partially set, and spun between that mould and an internal mould that had the embossing on it, called a turn-mould process. The lip was then ground to be smooth. The process was patented in 1887 with the title of "Mold for blowing turned bottles".This medicine glass is significant as an example of medical equipment that has a design still used today. It is significant also for having the embossing inside the glass, which was likely produced by the turn-mould method of bottle (and container) making.Medicine glass or dose cup; clear glass with small imperfections and ripples in the glass, no side seams and a slightly concave base. All embossed marks are inside the glass. The imperial measurements are in graduated scales for tablespoons, teaspoons, and ounces and drachmas. "OUNCES DRACHMS" "TABLE TEA"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, medicine glass, measuring glass, dose cup, medicine dispensing, medicine measurement, sambell pharmacy warrnambool, sambell chemist and dentist, internal embossing, glass embossed inside, 20th century chemist, blown glass, two-piece mould, turn-moulded glass, turned bottles

Edgbaston is now an affluent suburb of Birmingham. The relation of the owner, James Griffin, to the donor (a resident of Kew) has not been identified. 'The Gentleman's Magazine' of 1845 contains a reference to the death of Mary, aged 12, at Brighton, the daughter of James Griffin of Edgbaston and of Withymoor Works, Dudley. (p.325). Coincidentally, James Griffin, a manufacturer of Withymoor Works was issued with a patent for his improvements in the manufacture of "spades, shovels, and such like tools" on 5 October 1843. Withymoor Works was owned by James Griffin & SonNineteenth Century leather document wallet that was brought to Australia by James Griffin's descendants.Brown leather wallet with inserted gussets to side and brass plate with lock to front and a fold over flap with brass fitting which clips shut and can be locked and leather double stitched casing to back for inserting a belt with key to lock inside. The owners name is engraved on the clasp."James Griffin / Edgbaston."cases, wallets, edgbaston, james griffin, withymoor works

Beehive smokers douse bees with smoke to calm them and make them less likely to sting while honey is extracted from beehives. They were invented in the mid nineteenth century, prior to which bees were killed in order to extract their honey. The invention of the bee smoker was an important innovation in the history of apiary. The Wodonga Historical Society beehive smoker appears to be of the same design as the patented Woodman’s Bingham Bee Smoker, produced from 1878 by T. F. Binghan of Albronia, Michigan. The Wodonga Historical Society beehive smoker is an important artefact connected to local history, and the history of apiary in Wodonga. Beekeeping was a popular pastime in the late nineteenth and early twentieth century, and apiaries were subject to regulation by the Wodonga Shire Council. At a 1914 meeting of the council, for instance, a by-law governing beekeeping in Wodonga was enacted after Mrs Smyth complained that Mr Bassett’s bees were swarming the watering holes in her paddocks and preventing livestock from drinking. There were areas within the Wodonga township where apiaries were prohibited, and Mr Bassett’s bees had fallen foul of the law. A canvas, wood and metal beesmoker from the early twentieth century. apiary, bees, beekeeping, honey, apiarists, wodonga, council, wodonga council, wodonga shire council, rural, livestock

Standard Australian Army servicemans metal pocket knife with three folding implements. It has a single edge knife blade, a can and bottle opener and a marlin spike all hinged to fold away into the knife body. One end of the knife is equipped with a screwdriver blade stub. The other end is equipped with a pivoting copper suspension loop. The body of the knife is stamped with the manufacturer's details, which includes a description of the style of knife as an 'opener', patent number '15737' and a 'D^D' stamp. This knife is wrapped in a waxed piece of paper printed with the instructions for using the can opener blade.The body of the knife is stamped with the following inscription "WITTINGSLOWE, OPENER, ADELAIDE, PAT.APPLN 15737" and a 'D^D' stamp.vietnam, australian, army, pocket knife, opener

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612The artefact is a small piece of wood that was broken from the timbers of the shipwreck of the SCHOMBERG (1855) and carried by the eastern currents to New Zealand (1875). It has 2 drilled holes that show faint screw marks and no metallic residue (possibly for patent treenails). The top surface is rounded, of a dark colour, and showing clear grains that have been worn smooth by the action of the sea. There is a reddish stain on the timber where breakage has occurred. The wood appears to have been strong in its original condition but is now light to lift and soft and crumbly at its exposed edges. The artefact is in fragile condition.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

Scalebuoy. Invented by Hartley Abbott & patented under the name of the Bendigo Electronic Company, made in various sizes & for different applications, such as to prevent scaling in the boilers at mines. Made up of a sealed glass bulb containing mercury and gasses enclosed within a chromed wire cage & with a chromed handle. The one shown being a hand held shaker model. Scalebuoy sent to Alan from work colleague, Pat Curran in Tasmania. Pat Curran was working as the CEO of a retirement village and found the scalebuoys in the equipment there. Noting the Bendigo manufacturing logo he decided to send it to Alan. Original owner is not known.Bendigo Electronic Coy Ltd A. C. Scalebuoysciences, instruments - general, scalebuoy

Pittock collection: two metal carpenter's squares for set out * green painted adjustable set out square, with imperial and metric scales, and level bubble, 305 mm L x 120 mm W. Marked Pittock with marker * adjustable set out for full range of angle set out. steel wood and brass construction. Marked Stanley, patented 9-6-04. Tool 204-325 mm L x 25 mm W x 20 mm D Items stored in Pittock box coach builder's box, reference 13000.1.

Camera was originally owned by the owners grandfather and used by him at home and overseas. Later given to his son (donors farther)Brownie Autographic Folding No.2 Camera. Uses 120 roll film. Has a steel inscribing pin for writing on film through window on back of camera to record details. Has a ball bearing shutter - patented in USA, Jan 18, 1910 - Jan 7, 1913. Bellows folds back into camera and can be adjusted to 8,25, or 100 feet from object. Viewfinder can be varied from portrait to landscape view. It has a leather handle - film loaded by opening clip on lower front. Leather carrying case with name of original owner -G.H.Parsons, Melbourne, Victoria, Australia.photography, cameras

A concave wooden racquet with red, black, and gold whipping and stem wraps, and short, leather handle grip. Inscription across base of head on obverse: AEROFLIGHT. Company monogram 'B' situated below on throat. Inscription across base of head on reverse: "BENTLEY"/NIAGARA/FALLS. Decal of company coat-of-arms below on throat. Inscription along right side of stem: MADE IN CANADA, followed by patent details. On left side of stem: SPRING DRIVE SHAFT. Materials: Wood, Nylon, String, Metal, Ink, Glue, Lacquer, Leather, Cloth tape, Adhesive tapetennis

A wooden racquet with green cloth tape over parchment reinforcing, and a deep-grooved handle grip. The parchment reinforcing continues from the shoulders down the throat, creating the outline of a heart shape. Inscription across crown on obverse: SLAZENGERS'. Inscription across throat on obverse: BURKE/SLAZENGERS/PATENT/STRINGING. Inscription along right side of handle: SLAZENGERS' NEW YORK. Inscription along left side: ENGLISH MODEL. Butt cover features Slazenger hexagram trademark with motto. Materials: Wood, Gut, Metal, Glue, Lacquer, Ink, Cloth tape, Leather, Parchment, Stringtennis

A MacGregor Sarah Palfrey Cooke "Personal Model" tennis racquet, with string whipping around shoulders, shaft and handle, and leather handle grip with triangular perforations. Model name features on base of head, on obverse. MacGregor logo features across base of head on reverse. 'M' trademark inside clover device features on throat. Head and neck linear illustration, with signature reproduction of Cooke features on lower shaft on reverse. Inscription along left side of shaft: HALL PATENTED CONSTRUCTION/"THE ORIGINAL LAMINATED RACKET". Materials: Wood, Enamel, Leather, Nylon, String, Ink, Glue, Lacquer, Metaltennis

A MacGregor Frank Parker Championship tennis racquet, with string whipping around shoulders, shaft and handle, and leather handle grip with triangular perforations. MacGregor logo features on base of head, and on plastic butt cover. Model name features on throat. Head and shoulders linear illustration of Parker features on lower shaft on obverse. 'M' trademark inside clover device features on lower shaft on reverse. Inscription along left side of shaft: HALL PATENTED CONSTRUCTION/"THE ORIGINAL LAMINATED RACKET". Materials: Wood, Enamel, Leather, Nylon, String, Ink, Glue, Lacquer, Metal, Plastictennis