A painted steel container which originally contained a pair of standard issue Australian Army binoculars of World War 2 vintage. This container was used to house binoculars shipped to tropical areas.One Pair Binoculars / No2 MK II / D^D / TP1container binoculars tin

Standard Australian Army issue canteen pouch as used for carrying a water bottle during the conflict in Vietnam, but the name shown on the front of this item is not a Vietnam Veteran. Such items were also use post-Vietnam.An army issue canteen holder.Coop's 185 988 army issue, canvas, canteen

This is a standard issue, Australian Army Kit bag (referred to as a "Sausage Bag". It is made out of canvas, colour brown. It has numerous brass eyelets around the opening. Inside is a flap of similar canvas sewn to one side.On the base in white paint VX123648. The surname "Stevens" is blotted out by a 12 cm Square shipping label. It is partially destroyed. Surname Stevens . Inscriptions - on side in ink is name and NR. V59635 CPL Stevens N.C.ww2, army, kit bag

Standard Australian Department of Defence issue khaki fur felt slouch hat as worn by Army personnel. The hat brim has a bound edge finish and one side of the brim is folded against the hat crown. The folded brim is attached by a brass clip to the side of the crown. This hat has the normal seven fold puggaree. MOUNTCASTLE PTY LTD MAY 2005 57 O/N 235032

WWII HeritageFrom Australian War Memorial: Standard issue blocked brown leather rifle bucket for attachment to the Pattern 1912 UP saddle. Bucket is complete with a leather slide steadying fitting, half way down the bucket, to attach it to the surcingle of the saddle, and a leather strap with brass buckle at the top of the bucket which attaches it to the saddle tree.Strap only is stamped with a broad arrow and manufacturer's details 'BLACKMAN LEATHER GOODS LTD. 175 BERMONDSEY ST S.E.1 1940'.

Standard Australian Department of Defence issue khaki fur felt slouch hat as worn by Army personnel. The hat brim has a bound edge finish and one side of the brim is folded against the hat crown. The folded brim is attached by a brass clip to the side of the crown. This hat has a 7 fold puggaree and a leather chin strap. MOUNTCASTLE PTY LTD MAY 2005 57 O/N 235032

One handwritten and four typed copies of notes on the New Argus Mine at Eaglehawk. One typed copy has a locality map attached. Notes mention locality, depth of shaft, early history, prominence, amou;nt of gold obtained and production. References; Special Edition Australian Mining Standard 1/6/1899, Mines Dept. Booklet 'Bendigo Goldfield' 1936, Mines Department Annual and Special Reports, Annals of Bendigo Mining Section 1886 - 1922 and A. Richardson. 4 Typewritten copies of this item have not been scanned.document, gold, new argus mine, new argus mine, notes on the new argus mine, eaglehawk, specimen hill mine, mr cave, mr amos, the argus mine, north specimen hill mine, adlinga and pascoe & co, new hopeful, bendigo amalgamated goldfields, special edition australian mining standard 1/6/1899, mines dept. booklet 'bendigo goldfield 1936, mines dept. annual and special reports, annals of bendigo mining section 1886 - 1922, a richardson

Four copies, 1 hand written and 3 typed copies of notes on the Fortuna Hustlers Mine. Notes include depth of shaft, size of lease, locality, plant, other mines where the winding engine worked, prominence, best reefs, total production. References: Mines Dept Special Edition 'Australian Mining Standard' 1/6/1899; Mines Dept Booklet 'Bendigo Goldfield' Geo Brown 1936; Mines Dept Booklet No 33 H. Herman 1914; 'Annals of Bendigo' (Mining Sections, From 1888 - 1913): A. Richardson.mine, gold, fortuna hustlers, fortuna hustlers, hustlers line of reef, railway goods sheds, buckell & jeffrey's, roberts & sons, tambour major, birds reef, hercules no 1, north virginia mine, gold production & dividends, australian mining standard (special edition) 1/6/1899, mines dept booklet 'bendigo goldfields' 1936, mines dept bulletin no 33, h herman 1914, annals of bendigo mining section 1888 - 1913, a richardson

News and notes, The stoping of wide lodes (by J. V. Lake), Summaries & notes from the Australian Mining Standard, Notes on Broken Hill, I. Its mines and minerals (by W. J. Williams, Assayer Australian Metal Co. Ltd. Broken Hill), Motive power from the waves, Electrical notes, Some account of Italian mining (by C. Maglione), Students Association, The school Theatre Parly, Past Students, Poetry, Football, Surveying rules, correspondence, Editorial notes.Soft covered magazine of 14 pages. stoping of wide lodes, j. v. lake, broken hill, w. j. williams, australian metal co. ltd. broken hill, motive power from the waves, italian mining (by c. maglihone, students association, poetry, football, surveying rules, alumni, arthur coyte, fraser, crittenden, atherton, sander, j. sutherland, roberts, j. dunstan, hurston, moss, arthur e. liburne, kildahl, a. f. baird, e. h. elliott, a. dirge, a. b. reid, o. e. jager, j. a. reid, w. c. wakley, a. s. burdekin, r. g. todd, f. h. krause, g. mcintyre, ferdinand krause

This shirt was manufactured in 2004, and was presumably owned by a Beechworth local service personnel by the name of Cross. This piece of clothing would have been worn as part of the standard Royal Australian Naval Ratings uniform.White short sleeved shirt. Square collar with thin navy blue trim. A curved slit on either side of the lower edge (near the hip area) and an extra piece of fabric within each slit. A white label with inscriptions is stitched to the seam in the middle of the lower back seam. This has n written inscription beneath on the shirt fabric.Inscriptions on the label: CAN'T TEAR 'EM 8405-66-132-3767 R.A.N 2004 SIZE: 117 35% COTTON 65% POLYESTER GENTLE WARM MACHINE WASH. RINSE WELL. WARM IRON. DO NOT SOAK. DO NOT BLEACH. DRY CLEAN (A) MADE IN AUSTRALIA Written inscription under label: CROSSshirt, naval ratings, royal australian navy, navy

MILLERS CANOPUS As Merchant Knight (1952-63), Millers Canopus (1963-66), Lsoo Vung Tau (1966-?). In late 1963 Roderick W. Miller, with Commonwealth Government approval, purchased this tanker in Japan to enter the petroleum transport trade in opposition to overseas interests. Extensive modifications at Singapore ship yards upgraded the ship's facilities to meet Australian Seamen's standards. Renamed Millers Canopus, and had a crew of 42 seamen, including the officers. Sold mid 1966 to the Luzon Stevedoring Co Phillipines. Renamed Lsoo Vung Tau. No further details known.Formerly part of the collection of Howard Smith Ltd.Ship builders model of the tanker R W Miller in a glass case. The body is painted in colours of maroon, green and grey, the deck with detailed fittings and superstructure, an Australian merchant flag flying from the stern, within a mahogany framed glazed display caseplaque on base of model "MODEL BY I R AMIS LIMITED/ LONDON S.W. 20." Second plaque: " M.V MILLERSCANOPUS/ D/WT 15330 TONS/ DIMENSIONS 475' 0" B P X 67' 4 1/2" B.M X 37' 4" D.M./ BUILDERS-MESSRS SIRE JAMES LAING & SONS LTD. SUNDERLAND/ OWNERS - R.W MILLER & CO. PTY. LTD. SYDNEY/ YARD NO. 796/ 1952" on model: "MILLERS CANOPUS" painted with white

On 22 December 1890, the military commanders of the then separate Australian Colonies prior to the Federation of Australia met to discuss the introduction of the khaki uniform throughout Australia. They agreed that all Australian Forces with the exception of the Artillery would wear the slouch hat. It was to be looped up on one side—Victoria and Tasmania on the right and the other colonies (later states) on the left. This was done so that rifles could be held at the slope without damaging the brim. After Federation, the slouch hat became standard Australian Army headgear in 1903Today it is worn by military personnel from a number of countries, although it is primarily associated with Australia, where it is considered to be a national symbol.Slouch Hat - this broad brim hat is made of fur felt with an 8 fold hat band (puggaree) around the outside of the crown and attached to the inside of the crown is a brown leather chin strap. The left side of brim is held up by a gold colour metal rising sun badge.slouch hat, australian army, puggaree, rising sun badge, headgear

Joan O'Shea Collection. Victoria Hill Bendigo Gold Mining on the Richest Quartz Reef in Bendigo, from 1854 to 1916. Colour and Black and White Booklet 16 Pages. Includes Maps of the Victoria Hill Area, photographs of the remains of a twenty head crushing battery, burnt ground from quartz roasting, The Victoria Quartz Mine Photograph from Australian Mining Standard June 1899, The compressor beds and concrete foundations for the poppet legs all that remain today of the Victoria Quartz Mine deepest mine on Bendigo Goldfield 4613 feet or 1406.04 metres. Also included photograph of the view of Victoria Hill from The New Chum Hill in the 1870s. The Location of the 3 mines Ballerstedt's open cut, North Old Chum and Lansell's 180 are marked. A depiction of Rae's Open Cut gives an understanding of the primitive nature of early workings on the Goldfields. The Booklet also provides a brief history of Victoria Hill itself.Bendigo Trust Publication March 1972. Printed in Bendigo Cambridge Press.bendigo, mining, victoria hill

Standard Australian Army servicemans metal pocket knife with three folding implements. It has a single edge knife blade, a can and bottle opener and a marlin spike all hinged to fold away into the knife body. One end of the knife is equipped with a screwdriver blade stub. The other end is equipped with a pivoting copper suspension loop. The body of the knife is stamped with the manufacturer's details, which includes a description of the style of knife as an 'opener', patent number '15737' and a 'D^D' stamp. This knife is wrapped in a waxed piece of paper printed with the instructions for using the can opener blade.The body of the knife is stamped with the following inscription "WITTINGSLOWE, OPENER, ADELAIDE, PAT.APPLN 15737" and a 'D^D' stamp.vietnam, australian, army, pocket knife, opener

Map extract showing the towns of Cheddar, Rodney Stoke, Westbury and a smaller town of Easton. The area depicted is part of Somerset, England. Map is hand drawn by J.J. Raisbeck date unknown. John James RAISBECK was born on 4 July 1880 at Christchurch New Zealand. He served 4 years (Citizen Military Force - CMF) in 9th Australian Light Horse Regiment in Central VIC with the rank 2nd Lieutenant. He was the first Australian appointed to the Survey Section RAE, on 16 April 1910, as a draughtsman which was his civilian profession, with the rank Warrant Officer, honorary 2nd Lieutenant. He was required to resign his commission in the CMF. He supervised the draughting work of the Section in Melbourne and was largely responsible for the mapping standards and specifications set in the production of the Cowes one-inch-to-one-mile military map, which became the enduring Australian standard. He was also responsible for supervising the printing of the maps by the Victorian Government Printer. He was appointed 2nd Lieutenant in the AIF Survey Corps draft on 6 December 1917 (from Melbourne) embarking for England on 22 December 17. He was attached to the Australian Corps Topographic Section in France from 21 April 1918 to 5 March 1919 serving as Second-in-Command and as Officer Commanding. He was promoted Lieutenant 15 October 1918, attending the AIF Survey School, Southampton in 1919, returning to Australia 23 June 1919, before his AIF appointment was terminated 17 July 1919. He went on to serve the Survey Section RAE and Australian Survey Corps, including in the Second World War, having been promoted Captain then Major and Officer Commanding Army Headquarters Cartographic Section until February 1940. He retired after 33 years of service to military survey, and after serving the Corps in two world wars, on 4 July 1943 with the retired rank Lieutenant-Colonel. He was the author of the article ‘A Short History of the Military Survey of Australia, 1907-1936’, published in The Australian Surveyor, Sept 1, 1937Map extract slightly larger than A4. Scale: One Inch to One and a half Mile. 1:31680, 9 x copiesSignature of "J.J. Raisbeck" bottom right-hand cornerroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Early cylinders were coloured as their maker saw fit, usually black, perhaps with a white top for oxygen. The Americans first achieved standardisation, but other countries do not follow American Standards. Australia follows the colour-scheme of the British Oxygen Corporation. The body is coloured individually for each gas, viz: compressed air, grey; carbon dioxide, brown; oxygen, black; nitrous oxygen, blue’ cyclopropane, primrose-yellow’ ethylene, mauve. Panels of other colours may appear on the body, but indicate technical points of cylinder-design and do not concern the anaesthetist. (Penn catalogue entry)Empty small pale green painted cylinder with rounded base and attached outflow valve with circular 'On-Off' knob.Handwritten in red paint across the main body of the cylinder: ST. VINCENTS 32510 Printed on manufacturer's label: 'KEEP CYLINDER COOL / CIG [logo] / MADE IN AUSTRALIA / MEDICAL AIR COMPRESSED / DO NOT ALLOW OIL OR GREASE ON VALVE / OPEN VALVE SLOWLY CLOSE AFTER USEcompressed air, cylinder, colour standardisation

J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the produce business to the Kelly brothers in 2006. Mercury Scales was founded in Thebarton, South Australia in 1946. The business experienced rapid growth, leading to its joining with A&D’s global organisation and evolving into A&D Mercury. IN 2023 A&D Weighing is an Australian leader in the supply of electronic weighing scales, balances, metal detectors, checkweighers and weighing systems. This model was approved on 13 February 1980. On 25 March 1988 approval to change the business name to A & D Mercury Pty Ltd was granted by the Australian National Standards Commission. A set of cast iron scales. The measurement on the balance arm is in kilograms. There are 2 trays suspended by chains. bas is fitted with a level indicator and four adjustable feet.On Manufacturer's plate: MERCURY SCALE CO. PTY. LTD. SCALE MANUFACTURERS THEBARTON, S. AUST. INSTRUMENT APPROVAL NUMBERS N.S.C 6/9A/109 M/C No. Q. 760253 CAP 101 kg MODEL No. 211 Cj. mann & sons, mercury scales, wodonga businesses