McNamara collection Petticoat was made by Isobel from a nightgown (possible from her granddaughter's).- Cotton petticoat made from adult nightdress - Lace (broderie anglaise) trim - Pin tucked front - Back placket with press stud fasteningNilmcnamara collection, cotton, child's clothing, handmade

This is a handmade item made as a tourist souvenir.A small souvenir weapon made of woven coloured grass. The edges have shark's teeth tied in. The grass is coloured pink and blue. It is very light and has a loop for hanging.souvenir shark's-tooth handcraft-woven

One of the most common centre draft kerosene lamps one can find in the USA and Canada is the Rayo. Large and sturdy, simple to use, but also notorious for being a fuel hog. This lamp was made by Bradley and Hubbard Metalworks in Chicago also Bradley and Hubbard made the “Perfection” brand lamps that look like the Rayo and are pretty much the same lamp with all parts interchangeable. The Rayo was given away to customers for free as a promotional item by the Standard Oil Company. The lamp’s huge appetite for fuel meant a hefty increase in sales of kerosene for the company and increased profits. The Rayo is a classic centre draft lamp that uses a widely available tubular wick that measures 62mm flat. It employs a simple and reliable mechanism for securing wicks in the burner along with a brass tube with many small teeth at its end. The tube is attached to the toothed rack that’s moved up and down by the adjuster knob. This type of lamp was used in most households and on rural properties before the introduction of electricity and is an early example of a promotional. The lamp was given away to customers of Kerosene oil as a means of increasing the Standard Oil Company sales of Kerosene during the late19th to early 20th century.Kerosene Lamp, side lifting arm to light.Inscribed "Rayo" and "Made in the USA"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kerosene lamp, lighting, hurricane lamp, storm lamp, rayo ltd

One of the most common centre draft kerosene lamps one can find in the USA and Canada is the Rayo. Large and sturdy, simple to use, but also notorious for being a fuel hog. This lamp was made by Bradley and Hubbard Metalworks in Chicago also Bradley and Hubbard made the “Perfection” brand lamps that look like the Rayo and are pretty much the same lamp with all parts interchangeable. The Rayo was given away to customers for free as a promotional item by the Standard Oil Company. The lamp’s huge appetite for fuel meant a hefty increase in sales of kerosene for the company and increased profits. The Rayo is a classic centre draft lamp that uses a widely available tubular wick that measures 62mm flat. It employs a simple and reliable mechanism for securing wicks in the burner along with a brass tube with many small teeth at its end. The tube is attached to the toothed rack that’s moved up and down by the adjuster knob. This type of lamp was used in most households and on rural properties before the introduction of electricity and is an early example of a promotional. The lamp was given away to customers of Kerosene oil as a means of increasing the Standard Oil Company sales of Kerosene during the late19th to early 20th century.Kerosene Lamp, side lifting arm to light.Inscribed "Rayo" and "Made in the USA"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kerosene lamp, lighting, hurricane lamp, storm lamp, rayo ltd

This was a School of Mines Ballarat tie. The School of Mines was established in 1870, making it Australia's third oldest tertiary institution. The School of Mines had two divisions - a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying. The organisation remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. These three green polyester ties have a small SMB crest set within two gold diagonal pin stripes (5cm apart) in the middle of the wider front and one on the narrower end. (Men's polyester tie made In Australia under licence By Hollygreen) On a label tag at the back - Hollygreen, 100% polyester, Dry clean only, Made in Australiasmb, school of mines ballarat, school tie, costume, textiles, uniform

Wehner's Blacksmith's was founded at Orbost in 1889. This door was in the blacksmith shop. The door has many brands burnt into both sides. These brands are for local farmers and the brands would have been made at Wehner's.The Wehner family is/ was a prominent family in Orbost from the late 19th century. Herman Wehner founded Wehner's Blacksmith's at Orbost in 1889. Oswald Wehner began working in 1910 with his father. In 1947 Ossie's son Tom started blacksmithing, retiring in 1991 and closing the business, The building remains in Nicholson street.A large solid wooden door - tongue and grooved oregon. It is made of 12 vertical boards. On it are local branding marks. wehner's-blacksmith brands

c1880 This tiny tape measure, in Imperial measurements, was part of a Victorian era lady's sewing basket. The case is of polished timber, and the little winder, to retract the tape, is made of brass with a small ivory handleEarly settlers and market gardeners of Moorabbin Shire had to be self reliant producing their own food and making their farm equipment and clothing. The women of these families were skilful in all craftwork.c1880 this tiny, retractable, tape measure, in Imperial measure, is made of polished timber with a brass winder and ivory handle. Imperial ‘inch’ measurements on tape dressmaking, tape measure, sewing, craftwork, pioneers, early settlers, market gardeners, moorabbin, brighton, bentleigh cheltenham

Christening gowns are traditional outfits made just for baby’s baptism. They are almost always white and can be very ornate, highly decorated garments. Usually, the christening gown is quite long – much longer than the baby being christened, particularly when it is worn by a young or very small baby. Many families keep a “family” christening gown that has been passed down through various family members and is used for the baptism ceremony. This christening robe was probably used by the Cameron family.The christening gown was a late 18th century innovation usually made of white lawn, muslin or net, longer than the baby and fancier than a day gown. The design was a more moderate version of contemporary adult fashion. Most 19th century christening gowns featured lace. All, until the end of the century, had low necklines and short sleeves. This gown reflects the style of christening robes in the early 20th century. A high waisted, short-sleeved long white broderie anglaise christening robe made of fine cotton. It is hand made edged with machine stitched cut work lace. The bodice is pin tucked.christening-robe clothing-childhood

The context in which the hat was made and worn assists in establishing its potential historic significance. 'Bailliere's Victorian Gazetteer and Road Guide containing the most recent and accurate information as to every place in the Colony' (1870), describes the village of Vaughan as being located on the road from Daylesford to Castlemaine. In 1870 the Vaughan was deemed to be entirely a gold mining area, gold having been discovered in the district in 1853. Intriguingly the entry in the Gazetteer claims that the electoral division of Vaughan began at the junction of the Middleton Creek and the Loddon River, so perhaps the cap might have belonged to a member of a significant local family. In 1870, Vaughan had a population of about 1000 persons and included almost 300 dwellings. Articles from newspapers, published on Trove refer frequently to a Mr Middleton as a litigant in court cases before the Vaughan Court in the 1860s. By the 1870s, the Mt Alexander Mail, in an article on ‘Mining: The Pioneer Wheel’ describes the success of Mr Middleton and his Middleton’s Reef Gold Quartz Mining Company, which had built the largest water wheel in the Colony. The wheel was 20’ in diameter and 2’ wide. Quartz mining as practiced by companies such as Middleton’s had become necessary after the exhaustion of alluvial quartz mining deposits in the 1860s. So we can probably establish a link between the cap and a significant mining identity in the period in which the article was made. The historical significance of the cap is only one part of the story. Caps such as the Middleton example can also be items of aesthetic significance as they were typically, examples of women’s work, using published patterns in magazines such as the Ladies Home Magazine. While women might follow or adapt a published pattern, their choice of materials reflected what was available locally. The fine hand stitching on this example is evidence of high quality domestic needlework. The maker crafted the cap from five triangular pieces of cotton cloth, each piece lined with a faded yellow net. The net provides some stiffening for the cap and has a functional purpose in that it anchors the hand-stitched, looped design of yellow silk ribbon that decorates the surface of the cap. Gentleman’s smoking (lounging) cap believed to have been made in c.1860-69. The conical hat is made of a dark green cotton fabric embroidered with narrow ribbon of a paler green silk. The unlined rimless hat is made of four pieces of fabric. There is no evidence of the hat at one stage featuring a tassle. The original donation record noted that the cap had been made for, and was worn by, a Mr Middleton, of Vaughan in Central Victoria. Nilhats, smokers hats, men's clothing

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view of Alice Springs, Northern Territory, AustraliaMade in Australia / 10 / DEC 66M4australia, slide, robin boyd

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view on the way to Alice Springs, Northern Territory, AustraliaMade in Australia / 12 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Streetscene, Alice Springs, Northern Territory, Australia.Made in Australia / 29 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Screetscene, Alice Springs, Northern Territory, AustraliaMade in Australia / 22 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. John Flynn Memorial Church (1956), Alice Springs, Northern Territory, Australia. (Architect: Arthur Philpott.)Made in Australia / 23 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view on the way to Alice Springs, Northern Territory, AustraliaMade in Australia / 33 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view on the way to Alice Springs, Northern Territory, AustraliaMade in Australia / 34 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Native plant, when visiting Alice Springs, Northern Territory, Australia.Made in Australia / 19 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view of Alice Springs, Northern Territory, AustraliaMade in Australia / 11 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Rock detail, when visiting Alice Springs, Northern Territory, AustraliaMade in Australia / 20 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Rock detail, when visiting Alice Springs, Northern Territory, AustraliaMade in Australia / 13 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Aerial view on the way to Alice Springs, Northern Territory, AustraliaMade in Australia / 8 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Alice Springs, Northern Territory, AustraliaMade in Australia / 26 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Screetscene, Alice Springs, Northern Territory, Australia.Made in Australia / 21 / DEC 66M4northern territory, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘67 in Montreal. In 1966 Boyd travelled to Far North Queensland and the Northern Territory for research – the Expo exhibits included a coral display, a large rock feature made from Australian sandstone and a native plant garden.Colour slide in a mount. Probably Innisfail, Queensland, AustraliaMade in Australia / 4 / DEC 66M8queensland, slide

Original Climax Loco Headlight Lamp made by the Star Lamp company THE HISTORY OF STAR HEADLIGHT & LANTERN COMPANY 1889: On April 20 of 1889, "Star Headlight Company" formed. The company is located on Allen Street in the city of Rochester, New York. There were five original investors. The original founders were Elias C. Glazier, George L. Estes, Allen D. Close, James H. Crouch and George S. Riley. 1914: Name of company changes to "Star Head Light & Lantern Company." 1915: Star Head Light & Lantern Company catalog now lists more than 100 versions lamps and lanterns. Historic - Industrial railway - Forests Commission of Victoria, Timber Logging Climax Locomotive Headlight Lamp Original Climax Loco Headlight Lamp made of metal climax loco headlight lamp, star loco headlight lamp, star head light & lantern company, puffing billy

Ship's log register or recorder, used to determine the distance a ship travels and the speed it is traveling. It would be fixed to the rail (taffrail) at stern of the ship and attached to the log rotor that would be towed behind the ship. The Cherub design was one of the first to have the register placed on the ship instead of with the rotor in the water.Ship's taffrail log register, recovered from the tug "Melbourne". Dial and bracket, brass. "Patented and made in England". Parts of words 'Walker's Cherub Log, Mark II" are visible. 2 dials marked in 100's and 10's "Patented and made in England". Parts of words "W" (Walker) "CH" (CHERUB) "Ma" (Mark III) flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship's log register, log register, log dial, t walker, thomas walker, cherub log

Sepia photograph. Murray Views No 4 Hargreaves Street, Bendigo, Vic., showing the Ashmans Dry Cleaners, Ashmans Tailor, Ashmans Fine Suits & Morley Johnson Furniture also visible is the SEC building and other buildings.Murray Viewsphotograph, streetscape, bendigo, bendigo-history-businesses

150 page hard cover book with names of Geo Meakin tailor's customers, their orders and the cost of articles. Entries date from July 1919 to September 1922. Section covering October 1922 to July 1923 missing.bendigo, business, geo meakin tailor