Rick AMOR (1948- ) Born Frankston, Victoria After completing a Certificate of Art at the Caulfield Institute of Art in 1865 Rick Amor studied at the National Gallery School, Melbourne from 1966 to 1968. Amor has held over 60 solo exhibitions, and has worked in Barcelona, New York and London. In 1999 Rick Amor became the first official Australian war artist since the Vietnam War. He was appointed by the Australian War Memorial to document the devastated land in East Timor, and the reconstruction efforts of peacekeepers. Professor David Caro OAM was Chancellor of the University of Ballarat for two terms, between 1998 and 2004. His contributions to academia and science have recognised on a national and international global scale. His appointments include Officer in the Order of the British Empire (OBE) and Officer in the Order of Australia (AO). This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007. ContemporaryFramed portrait of Professor Emeritus David Caro, University of Ballarat (later Federation University Australia)art, artwork, rick amor, amor, chancellor, david caro, caro, academic portrait, portrait, oil, oil on linen, commissioned, academic regalia

Plaque commemorating the opening of the Dickinson Centre, named in honour of Harold and Mercy Dickinson, both totally blind since childhood, who never let challenges stand in their way. Mercy was the first woman who was blind to obtain a Bachelor of Arts degree at the University of Queensland, and received her Masters Degree in the Education of Blind People with Additional Handicaps in New York, and an Honorary Doctorate for Education from the University of Queensland in 1994. Mercy and Harold established the Queensland Training and Placement Centre for the Blind, the first establishment of its kind in Queensland. Harold, who was a prolific writer, was appointed the Director and Mercy was the first volunteer at the Centre. Together they gave a lifetime of dedication and commitment ensuring that people who were blind or had low vision had the same opportunities as those with sight. The Centre later merged with other organisations and in 2006 became part of Vision Australia. The second plaque provides a background to how Harold and Mercy met, and their roles in expanding the the opportunities for everyone around them.Rectangular metal plate with inscriptionThe Dickinson Centre This refurbished centre was Officially opened on 9 November 1990 by The Hon. Ben Humphreys M.H.R. Federal Member for Griffith and Minister for Veterans Affairs and Blessed by Br. Alan Barnabas S.S.F. So named by the QLD Foundation for Blind People Inc (Est. 1956) to Honour The Contribution Made by Harold and Mercy Dickinson 1990 Committee of Management Don Cameron President Mercy Dickinson Vice President Rex Stevens Secretary Moira Solomon Treasurer Del Donaldson Bruce Miller Bob Faulconbridge Justice Bill Pincus Jenny Finch Ken Scells Garry Macdonald Kevin Standish Ian Stewart David Henderson Patron: His Excellency The Governor of QLD Sir Walter Campbell A.C. Q.C.queensland foundation for blind people, nameplates, harold dickinson, mercy dickinson

Kevin Coombs, OAM (born 30 May 1941) is an Australian wheelchair basketballer and athlete who competed at five Paralympics including the first Paralympic Games in 1960. He was the first Australian Aboriginal Paralympic competitor for Australia. Coombs was part of the Australia men's national wheelchair basketball team at the 1960 Rome, 1968 Tel Aviv, 1972 Heidelberg, 1980 Arnhem and 1984 New York/Stoke Mandeville Paralympics. He served as coach/captain at the 1972 games and as captain at the 1984 games. He also participated in athletics events at the 1968 and 1972 Paralympics. He captained the silver-medal-winning Australian wheelchair basketball team at the 1974 Commonwealth Paraplegic Games in Dunedin, led the Australian team in gold medal performances at the 1977 and 1982 FESPIC Games, captained the team at the 1977 Silver Jubilee Games, and played in the 1983 Wheelchair Basketball World Championship.[10][11] The 1980 Summer Paralympics were held in Arhmen, in The Netherlands, the sixth edition of the event.Plastic card, containing orange cardboard ID card, with photo inset.Front: Logos of 1980 Paralympics and Paralympic mascots (in Dutch) Olympische Spelen voor Gehandicapten 21 juni-5-juli Reverse: very degraded portrait photo of Kevin Coombs Nation - AUSTRALIA Name:- Coumbs Classification - 4 Startnr - 0087 Points 2

Report - black Rexene cloth card covers, 28 pages (including blank end and glued papers), sewn binding one section titled "Chairman's Report upon his Visit to Europe and America in connection with Electric Tramways 1923". Title gold blocked. Details Alex Cameron's 1923 visit to America, Great Britain and the Continent of Europe in connection (note different spelling to the cover) with electric tramways. In particular it was to investigate the question of the use of Conduit systems. Visited San Francisco, Los Angeles, Kansas City, St Louis, Chicago, Detroit, Cleveland, New York and Washington. Then to London, Paris, Brussels. Also attended the Municipal Tramways Association conference held in Portsmouth, August 1923. His conclusions - conduit system not desirable, and the need to regulate buses from competition with tramways. Has an appendix extracts of numerous reports, letters and papers about the various issues. Report dated 29th Oct. 1924. Second copy from the McComb collection added 5-1-2017 - scanned to a pdf - text readable when opened in Adobe format.Has a lable on the first page, "Plan & EPA Library M0036390" Second copy - has Mr. Lormer in the top left and right hand comers.trams, tramways, trams, tramways, mmtb, conduit systems, tramways, conversion, electrification, europe, usa

Melvin Newton Lovell was born in Allegheny, Venango county, Pennsylvania, on 31 August 1844, to Darius T. Lovell (1815-1855) and Susan B. (Conover) Lovell (1827-1883). When Melvin Lovell was a boy, the family removed to Kerrtown, a village located in the vicinity of Titusville, PA. There Melvin served an apprenticeship at the carpenter's trade, and his natural mechanical talent enabled him to become a skilled workman. He followed his trade during the major portion of his term of residence in Kerrtown. In 1861, at seventeen years of age, Melvin Lovell left his home and, without parental authority, and entered the Union army soon after the outbreak of the Civil war. In August 1862, he was enlisted as a private in the 127th Pennsylvania Volunteer Infantry and saw active service until receiving his discharge at the end of May 1863. In 1865 he took up his residence in Erie, where he worked at the carpenter's trade for several years thereafter. In 1869 Melvin Lovell invented and patented several useful articles for household use, and in that year he began the manufacturing of certain of these inventions, in partnership with Franklin Farrar Adams, another inventor. Among the principal products of the original factory were washing machines and step-ladders. In 1881 Lovell individually began manufacturing other of his patents, including spring beds, and from modest inception, his Lovell Manufacturing Company grew to be one of the largest industrial concerns of its kind in the country and was recognized as being the most extensive manufacture of clothes-wringers in the entire world. In connection with his manufacture of domestic items, Lovell established sales agencies for his products in all parts of the country, and these branches were known as the Lovell stores. These goods were sold on the instalment plan and after his business had already been established becoming a substantial concern Lovell invented and patented the famous wringer which bears his name under the “Anchor” brand, and in later years he confined his operations largely to the manufacture of this very superior household invention. Lovell was also one of the organizers and stockholders of the Combination Roll & Rubber Manufacturing Co, of New York, which was formed to manufacture his patents, with headquarters in New York and a factory at Bloomfield, New Jersey.A significant household item used in the process of washing clothes by a man who had started in 1869, as a young carpenter and later he became a successful businessman and manufacturer of household items. Lovell was granted numerous patents for various devices during his career including several patents for adding machines (cash registers).Wringer (or mangle); portable wooden washing wringer with rubber rollers, manually driven by iron set of gears and handle. Includes iron clamps and adjusting screws for attaching. Marked on frame "382", "12 x 1 3/4" Anchor Brand "Made in USA" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, mangle, clothes wringer, washing equipment, laundry, wringer, domestic, washing mangle

Melvin Newton Lovell was born in Allegheny, Venango county, Pennsylvania, on 31 August 1844, to Darius T. Lovell (1815-1855) and Susan B. (Conover) Lovell (1827-1883). When Melvin Lovell was a boy, the family removed to Kerrtown, a village located in the vicinity of Titusville, PA. There Melvin served an apprenticeship at the carpenter's trade, and his natural mechanical talent enabled him to become a skilled workman. He followed his trade during the major portion of his term of residence in Kerrtown. In 1861, at seventeen years of age, Melvin Lovell left his home and, without parental authority, and entered the Union army soon after the outbreak of the Civil war. In August 1862, he was enlisted as a private in the 127th Pennsylvania Volunteer Infantry and saw active service until receiving his discharge at the end of May 1863. In 1865 he took up his residence in Erie, where he worked at the carpenter's trade for several years thereafter. In 1869 Melvin Lovell invented and patented several useful articles for household use, and in that year he began the manufacturing of certain of these inventions, in partnership with Franklin Farrar Adams, another inventor. Among the principal products of the original factory were washing machines and step-ladders. In 1881 Lovell individually began manufacturing other of his patents, including spring beds, and from modest inception, his Lovell Manufacturing Company grew to be one of the largest industrial concerns of its kind in the country and was recognized as being the most extensive manufacture of clothes-wringers in the entire world. In connection with his manufacture of domestic items, Lovell established sales agencies for his products in all parts of the country, and these branches were known as the Lovell stores. These goods were sold on the instalment plan and after his business had already been established becoming a substantial concern Lovell invented and patented the famous wringer which bears his name under the “Anchor” brand, and in later years he confined his operations largely to the manufacture of this very superior household invention. Lovell was also one of the organizers and stockholders of the Combination Roll & Rubber Manufacturing Co, of New York, which was formed to manufacture his patents, with headquarters in New York and a factory at Bloomfield, New Jersey.A significant household item used in the process of washing clothes by a man who had started in 1869, as a young carpenter and later he became a successful businessman and manufacturer of household items. Lovell was granted numerous patents for various devices during his career including several patents for adding machines (cash registers). This item is now sought by collectors and is even rarer due to it's combination with a Lovell clothes wringer. Wooden wash trough with 2 troughs & attached a Lovell wringer (or mangle Anchor Brand) Hard to make out as worn off with useflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, flagstaff-hill-maritime-village, wash trough, wringer, mangle, laundry, cleaning, washing, housework, domestic, melvin newton lovell, wooden was trough

Édouard de Reszke was born into a well-to-do and cultured Polish family in Warsaw, where he first learned to sing. He spent four years in Italy, studying singing first with Stella and Alba in Milan and later the retired baritone Filippo Coletti. He later went to Paris to study with Giovanni Sbriglia, who was also his brother's teacher. Initially, he did not want to become an operatic performer but at the urging of his younger sister, Josephine (Józefina), he accepted an engagement with the Paris Opera. He was chosen by the composer Giuseppe Verdi to make his debut in the first Paris performance of Aida on April the 22nd 1876, appearing under the composer's baton as the King of Egypt. De Reszke's older brother was the renowned lyric dramatic tenor Jean de Reszke (1850–1925), with whom he would sing often in Paris, London and New York City during the next two decades. In 1887, for example, the brothers performed together in the 500th performance of Gounod's Faust at the Paris Opera. Josephine, Eduardo and Jean's sister, also embarked on a career as an opera singer in Paris but she retired early from the stage after marrying an aristocrat while at the height of her powers. Between the start of 1880 and the end of 1900, Édouard de Reszke appeared on more than 300 occasions at the Royal Opera House, Covent Garden, performing a wide range of roles in French, German and Italian operas, including works by Wagner, Verdi, Rossini, Bellini, Donizetti, Ponchielli, Verdi, Rossini, Bellini, Donizetti and Mozart. He was a huge favourite, too, with audiences at New York's Metropolitan Opera during the same era. He also sang in Chicago in 1891 and, in 1879–1881, at La Scala, Milan. In 1903, he retired from the stage after his once superlative voice developed technical difficulties and went into a swift decline. De Reszke taught singing for a while in London before returning to his estate in Poland, where he was adversely affected by the outbreak of World War I in 1914. He was cut off from his brother by the fighting, and died on 25 May 1917 at a house in Garnek, near Częstochowa, Poland. Édouard de Reszke, was a Polish bass singer from Warsaw, born with an impressive natural voice and equipped with compelling histrionic skills, he became one of the most illustrious opera singers active in Europe and America during the late-Victorian era. De Reszke cigarettes are named after Édouard de Reszke and were advertised as ‘the Aristocrat of Cigarettes’. They were produced by J Millhoff, a Russian cigarette maker living in London. He created a special blend of tobacco that it was believed would not damage the famous singer's voice. In gratitude, Millhoff was allowed to sell the blend as 'De Reszke' cigarettes. Cigarette tin, small square, pale aqua color.Marked on lid with two coats of arms in gold, and text in dark blue underneath. 'De Reszke Virginia ‘The Aristocrat of Cigarettes'.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, aristocrat of cigarettes, j millhoff, opera singer

De Witt's Kidney and Bladder Pills were produced by a firm founded in 1912 by E C De Witt, Cheshire UK, with branches in New Zealand, Chicago and New York. It became part of the CB Fleet Group in 1990, whose UK operation is currently based in Runcorn, Cheshire where they still manufacture toiletries, skin care products and pharmaceutical products. Aimed at adults and children above the age of eight, De Witt’s Kidney and Bladder Pills were intended to ease backache, aches and pains in the muscles, and kidney problems. They are typical of a huge range of treatments that were available ‘over the counter’ at pharmacists for many years. It is not known how effective the pills were but the label assures people not to be alarmed if their urine takes on a bluish colour after taking a dose. The indications or uses for this product as provided by the manufacturer are: A diuretic stimulant for the kidneys to promote the flow of urine, combined with analgesic action. Aids in alleviating muscular aches and pains, restlessness, dizziness, backache, headache, getting up at nights, loss of energy if caused by sluggish kidneys. An empty clear glass bottle with a metal screw top lid that contained De Witts Pills Front Label : NEW / DE WITT'S PILLS / rising sun trade mark / Relieve the pain of Rheumatism / Backache, Fibrositis, Sciatica / DIRECTIONS ......../ R.C.De Witt & Co (Aust) Pty Ltd. / St. Kilda Melbournepharmacy, medicines, glassware, bottles, moorabbin, bentleigh, cheltenham, de witt company ltd, cheshire england, cb fleet group ltd, glass manufacturers

International time clock with different time zones of the world. Inside is a key for tuning. Blue with gold design of city and plane.PORT OF YOKOHAMA/ 1859/ GMT/ LONDON/ AZORES/ BUENOS AIRES/ RIO DE JANEIRO SAO PAULO/ SANTIAGO/ TORONTO / WASHINGTON / NEW YORK / BOGOTA, LIMA / MEXICO CITY / CHICAGO / NEW ORLEANS / DENVER / VANCOUVER / SAN FRANCISCO / LOS ANGELES/ HONOLULU/ ANCHORAGE/ MIDWAY/ DATE LINE / AUCKLAND/ MELBOURNE/ SYDNEY, GUAM/ TOKYO, OSAKA, SEOUL/ BEIJING/ TAIPEI, MANILA/ HONG KONG/ SINGAPORE/ KUALA LUMPUR/ BANGKOK/ JAKARTA/ CALCUTT/ BOMBAY/ NEW DELHI/ KARACHI/ MUSCAT/ TEHERAN/ KUWAIT/ MOSCOW/ JOHANNESBURG/ ATHENS, BEIRUT/ CAIRO, TRIPOLI/ BERLIN, ROME/ PARIS, MADRID/ AMSTERDAM/ LORD KING/ JAPAN" "PMA 0346"

Report - 32 pages centre stapled, printed on foolscap paper, has an index (see image i2), report of the Royal Commissioner Sawyer titled "Report on the Status and Affairs of the State Electricity Commission of Victoria and the scope and working of the State Electricity Commission Acts". Looks at the financial situation of the Commission, its management, equipment, power supply systems, Newport, technical issues, hydro power stations, Yallourn, problems with brown coal, use of Richmond Power station Signed by author on rear page. Note: At the time of cataloguing very little found on Mr. W. Sawyer - see reference in Trove for meeting with Sir John Monash - http://trove.nla.gov.au/newspaper/article/3737172/446386 and International Electrical Engineers - http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=5217646, that he died 1/3/1966, age 93 - had been associated with Electric Street Railway companies, the Railway Engineering Department of General Electric and the firm Ford Bacon and Davis in New York City. For scan of full document see htd2104i3.pdf - downloaded from the Parliamentary web site - 29/7/2018.In the top right hand sector "J.P.S. just to let you know that I have appreciated your many courtesies and kindnesses HHS - 28/5/26". On rear page, has been signed by Willits H. Sawyer.trams, tramways, secv, power supply, royal commission, newport power station, richmond power station

A smoothing plane is typically used after the work piece has been flattened and trued by the other bench planes, such as the jack, fore, and joiner planes. Smoothing planes can also be used to remove marks left by woodworking machinery. When used effectively alongside other bench planes, the smoothing plane should only need a handful of passes removing shavings as fine as 0.002 inches (0.051 mm) or less. The work piece is then ready to be finished, or can be further refined with a card scraper or sandpaper. The smoothing plane is usually held with both hands, and used in a similar manner to the other bench planes. Though designed for smoothing, a smoothing plane can be used as an 'all-round' bench tool and for rougher work depending on how it is set up. Being smaller than other bench planes, the smoothing plane is better able to work on smaller work pieces and around obstructions. Since the 1700s wooden smoothing planes have predominantly been 'coffin shaped' wider in the middle and slightly rounded making them more manoeuvrable. It has also been claimed that the coffin design exposes more end grain, enabling the plane to better adjust to changes in humidity. Henry Boker Maker: Heinrich "Henry" Böker of Reimschied-Solingen, Germany and his family was making tools in the 17th century. In 1829 Hermann and Robert Böker added sabres to the company's offerings, in 1837 they emigrated to New York City and established a firm to import German cutlery. H. Boker sabres would be eventually supplied to some American soldiers during the Civil War. Heinrich Boker in 1869 , a relative of Hermann and Robert, established a cutlery firm in Solingen, a centre of industry and cutting tool manufacturing in Germany. The company became a leader in the manufacture of razors, scissors and eating utensils. As early as 1900 the majority of tools produced by Boker were distributed in the U.S. market by the New York branch of the family, and pocket knives became the company's most important product line. During WWII the Solingen factory was destroyed and all the equipment and inventory was lost. After the war the factory was rebuilt and the company resumed operations, but in the early '60s the company was sold to the scissors manufacturer Wiss & Sons, and in the early 70s Wiss sold out to Cooper Industries. At some point Heinrich Boker adopted the Americanised version of his name, Henry Boker and was used as a brand name for the company's products. A vintage smoothing plane of the coffin pattern made by Henry Boker the item is a rare and significant example of vintage woodworking tools used in the manufacture of wooden items.Smoothing Plane Coffin design. Blade marked Henry Bokerflagstaff hill, warrnambool, maritime-museum, shipwreck-coast, smoothing plane, heinrich boker, carpenters tool, cabinet makers tool

A smoothing plane is typically used after the work piece has been flattened and trued by the other bench planes, such as the jack, fore, and joiner planes. Smoothing planes can also be used to remove marks left by woodworking machinery. When used effectively alongside other bench planes, the smoothing plane should only need a handful of passes removing shavings as fine as 0.002 inches (0.051 mm) or less. The work piece is then ready to be finished, or can be further refined with a card scraper or sandpaper. The smoothing plane is usually held with both hands, and used in a similar manner to the other bench planes. Though designed for smoothing, a smoothing plane can be used as an 'all-round' bench tool and for rougher work depending on how it is set up. Being smaller than other bench planes, the smoothing plane is better able to work on smaller work pieces and around obstructions. Since the 1700s wooden smoothing planes have predominantly been 'coffin shaped' wider in the middle and slightly rounded making them more manoeuvrable. It has also been claimed that the coffin design exposes more end grain, enabling the plane to better adjust to changes in humidity. Henry Boker Maker: Heinrich "Henry" Böker of Reimschied-Solingen, Germany and his family was making tools in the 17th century. In 1829 Hermann and Robert Böker added sabres to the company's offerings, in 1837 they emigrated to New York City and established a firm to import German cutlery. H. Boker sabres would be eventually supplied to some American soldiers during the Civil War. Heinrich Boker in 1869 , a relative of Hermann and Robert, established a cutlery firm in Solingen, a centre of industry and cutting tool manufacturing in Germany. The company became a leader in the manufacture of razors, scissors and eating utensils. As early as 1900 the majority of tools produced by Boker were distributed in the U.S. market by the New York branch of the family, and pocket knives became the company's most important product line. During WWII the Solingen factory was destroyed and all the equipment and inventory was lost. After the war the factory was rebuilt and the company resumed operations, but in the early '60s the company was sold to the scissors manufacturer Wiss & Sons, and in the early 70s Wiss sold out to Cooper Industries. At some point Heinrich Boker adopted the Americanised version of his name, Henry Boker and was used as a brand name for the company's products. A vintage smoothing plane of the Bismark pattern made by Henry Boker the this plane is now regarded as a collectors item and is an example of vintage woodworking tools used in the manufacture of wooden products.Smoothing Plane Bismark design. Blade marked Henry Bokerflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, smoothing plane, heinrich boker, carpenters tool, cabinet makers tool

The biscuit locker came from the vessel the "City of Rayville", an American motor-driven freighter constructed in 1920. The ship was the second victim within 24 hours of an extensive minefield laid by German raiders in October 1940, during World War Two and the first American ship to be sunk in world war II. She was under the command of Captain Cronin and bound from Adelaide via Melbourne to New York, carrying a cargo of 1500 tons of lead from Port Pirie along with a cargo of wool and copper from Adelaide, when she struck a mine in the Bass Strait, six miles south of Cape Otway at 7:45 pm on 8th November 1940. The explosion was heard on shore at Apollo Bay; the force of it tore out the foremast and the ship sank within 25 minutes. There was a crew of 38 and all but one survived. A rescue crew of fishermen from Apollo Bay left shore in the dark and picked up the survivors from the dangerous sea taking them back to safety. The US Secretary of State Cordell Hull at the time wrote individual letters of thanks to all the rescuers involved. The biscuit locker is of historical and marine archaeological significance because of its association with the wreck of the City of Rayville. The vessel is listed on the Victorian Heritage Register No VHR S126. Additional significance is that the ship was the first American vessel sunk in the second world war and is still socially significant to the descendants of the City of Rayville crew and the Apollo bay fishermen who took part in the rescue.The external surfaces of the cupboard and the inside of the door are painted brown. The interior is painted blue the door has 2 metal hinges attached on the outside, each with 6 single-slotted screws and a wooden rotating door latch attached to the side of the door. There is a round eyelet on the door near the latch, the cupboard sides are each made from wood joined vertically and sit within a slightly wider, flat base and top. The frame of the cupboard is split with the paint on the outside of the cupboard scratched and chipped revealing a darker paint underneath. There is also a rough slash of white paint from the side of the cupboard going to about the Centre of the door. “PI/298” is hand written in black pen, paint or ink on the inside panel of the door in neat letters. "MS CITY OF RAYVILLE" stamped on back of cupboard in black paintcity of rayville, cupboard, locker, biscuit locker, 1940, world war ii, wwii, cape otway, german mines, american ship, flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, rayvill

Articles in annual report include: List of RVIB president, vice president, board of management, medical staff and officers of the institute, honorary officers and consultant medical staff, President's report, Nursery and school, Industrial, Training and rehabilitation centre, Multi handicapped blind children, Sight restored after 35 years - article about John Crowe who went to New York where no other medical centre in the world offered a procedure to use a synthetic cornea. The cost of the trip was met by RVIB, after losing his sight which he lost in an industrial accident, when he returned to Melbourne he saw his wife for the first time, Carols by candlelight, Finance, Welfare and counselling services, Blindness in old age, Auxiliaries and other general helpers, Services and facilities, When you make or amend your will. Events that occurred in 1970 : Australia post supported work training program -offered a complete training centre for blind switchboard operators, the only one of its type in the world, established at the institute, 53 operators were successfully employed in Vic, some also operate as receptionists.1 printed volume with photographsroyal victorian institute for the blind, annual reports

Report - set of seven bound volumes titled "Report of the Chief Engineer on his tour of America and Europe 1957". Each volume, contains foolscap stencil duplicated sheets with some folded drawings and many pages of photographs. Each volume has a printed title sheet, table of contents bound with glue end sheets into a green and black leather hard cover. Each set of sheets have been sewn into the volume with cut sheets to allow for folded drawings and photographs. Each volume has the MMTB name, logo and report title in gold block on the front and on the spine. The spine has the volume number as well. 1 - Report Vol 1 - Introduction, Architectural and Civil Subjects 2 - Baltimore, Birmingham, Blackpool, Boston, Brussels, Cleveland, Copenhagen, \Detroit 4 - Glasgow, Gothenburg, Hamburg-Berlin, Liverpool, London 5 - Los Angeles, Manchester, Milan, Montreal, New York, Philadelphia 6 - Rome, St Louis, San Antonio and San Francisco 7 - Stockholm and Toronto. Dated report 30 June 1958. Photographs generally taken by Ken Hall who accompanied Mr Eakins on the tour. See Reg Item 4522 for additional prints of the Scandinavian Section of the trip.trams, tramways, tours, overseas tours, chief engineer

This photograph of the Monkbarns was taken prior to 1927 before the sailing ship was converted for use as a hulk. The steel-hulled, 3-masted fully rigged ship was built in 1895 by Archibald McMillan & Son at Dumbarton in Scotland. It was 267 feet long, 40.1 feet wide and 23.5 feet deep. In 1914 John Stewart & Co. owned ten sailing vessels, one of which was the Monkbarns, but by the end of the first World War, the fleet had only four vessels survived the war, including the Monkbarns. The Monkbarns traded across the world. Some of the destinations included Port Adelaide, Table Bay in South Africa, Liverpool, Sydney, London and New York. Her last commercial voyage was in 1926. Overall, the ship traded for 32 years before it was converted in Spain in 1927 for use as a hulk for carrying coal. There were several owners of the ship over its lifetime. They were - 1895, first owner, Charles Webster Corsar, Liverpool - 1902, the owner was D. Corsar & Son, Liverpool - 1909, owned by John Hardie & Sons, Glasgow - 1911, John Stewart & Co., Liverpool - by1915, James A. Young, London - 1926, L.H. Wilson, Liverpool - 1927, Ballener Espando (Brunn & van Lippe, Tonsberg).The postcard shows and example of the sailing ships that traded across the seas and into Australia in the late 19th and early 20th century.Black and white postcard of a sailing ship, fully rigged, at sea. Handwritten on front of card is "Monkbarns"Handwritten on front "MONKBARNS". monkbarns, postcard, sailing ship, flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, newccastle, hulk

The Sons of Temperance was founded in New York in 1842 and brought to New South Wales by the Baptist minister, Dr William Hobbs, a short time later. Division, or local branches, grew quickly so that in October 1864, a provisional Grand Division was formed with a commitment to spread the word on temperance throughout the country, and the advantages gained by joining a temperance benefit society. It was reported that by 1869, in New South Wales, there was a National Division, two Grand Divisions, and one hundred and seven Divisions, with a total membership of 5970. While a distinct part of the temperance movement, the Sons of Temperance was also a 'friendly society'. Friendly societies were fraternal organisations established to assist members and their families cope with unemployment, sickness and death. No government unemployment or hospital benefits were available to individuals when the societies were initially formed. In each society, members contributed financially to a common fund which could be drawn upon in times of need. In 1868, members of the Church of Christ, Cheltenham, initiated a meeting to form a Division of the Sons of Temperance, which was subsequently called Star of Moorabbin Division, No 29. The meeting was held at the Cheltenham Temperance Hall on 30 September, with office bearers appointed and the larger membership acknowledged.This minute book records the minutes of the meetings of the Star of Moorabbin Division of the Sons of Temperance. It also records the first office holders. Additional members and some financial information is also recorded.Hard covered book, lined in brown fabric with red leather corners and spine used as a minute book for the Sons of Temperance, Star of Moorabbin Division. Inside pages are unlined, although a red margin has been printed. Additionally, the fly sheet of the book has printed text, which has been completed in handwriting.Handwritten in blue ink on the inside of the front cover: J.W. Hall G.S. / Brighton Cottage / Freeman Street / North Carlton The fly sheet has printed text which has been crossed out with handwritten edits: Star of Moorabbin Division / No 29 / Instituted: September 30th 1868friendly societies, societies, temperance, cheltenham, moorabbin

Comprises a collection of metal, wooden and plastic toys which would possibly date back to the 1920s to 1940sThis collection came from the Warton / Baker families from Tawonga and Redbank in the Kiewa Valley.Collection of metal toys: 1. x2 Train Locomotives 2. Red tractor - mechanical with key 3. Man using grinder - mechanical with key 4. Two birds with worm - mechanical with key 5. Green trailer - mechanical with key 6. Small tank - mechanical with key 7. Aeroplane 8. Metal top 9. Home-made push-along wheels 10. Home made top 11. Cap gun 12. Cookie Cutters 13. Small tin puncture Kit - empty 14. Metal fox whistle 15. Tin trumpet 16. Large metal pump top 17. Plastic & metal mechancal toy in cardboard box- Jolly Skipper Other: 1. Monkey puppet with paper legs 2. Small plastic bells 3. Plastic boy on bike 4. Plastic green car 5. Plastic small trains 6. Soldier dog 8. Two half coconut shells (hollow) 9. Cylinder of wooden mechano tinker toy 10. Plastic Mr & Mrs Funny Face in box 11. Trip to New York game in box 12. Wooden Modelcraft - Build-ees in box 13. Wooden ring 14. Jig-saw toys, puzzles, wooden mechano, mechanical toys, recreation, children

William A Ives worked in New Haven, Connecticut, and surrounding towns of Wallingford and Hamden from 1868 to 1917 and was a prolific inventor of braces and other wood boring tools between 1868 and 1884, when he received a dozen patents for these devices. William A. Ives lived in the New Haven CT area, and his first auger-making activity took place in the town of Hamden. At first in association with the Churchill family who had been manufacturing tools in the area at least as early as 1863. That firm's works had created "Augerville" in Hamden, starting earlier, possibly as early as 1830. Ives became active as part of the Hamden Manufacturing Co. until 1875 (it is thought he may also have started his own business in the interim), and the William A. Ives & amp; Co. was established by 1877. This continued, until William's death in 1888, when The Hamden Mfg. Company became its successor. Ives also registered the name "Mephisto" trademark name with the US patent office that was to be used in connection with augers, auger bits, machine bits as of June 1st, 1909, appearing on items up until at least 1922. It also appears that the trademark was licensed by the Mephisto Tool Co of Hudson New York who continued to manufacture tools under this trademark. Item is significant because its maker was the inventor of the wood auger boring bit and his patent has been used ever since on many different types of bits with little change to the original design.Auger wood screw bit W A Ives Patent Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This photograph was taken in about 1924 as it approached Newcastle, New South Wales before the sailing ship Monkbarns was converted for use as a hulk. The steel-hulled, 3-masted fully rigged ship was built in 1895 by Archibald McMillan & Son at Dumbarton in Scotland. It was 267 feet long, 40.1 feet wide and 23.5 feet deep. In 1914 John Stewart & Co. owned ten sailing vessels, one of which was the Monkbarns, but by the end of the first World War, the fleet had only four vessels survived the war, including the Monkbarns. The Monkbarns traded across the world. Some of the destinations included Port Adelaide, Table Bay in South Africa, Liverpool, Sydney, London and New York. Her last commercial voyage was in 1926. Overall, the ship traded for 32 years before it was converted in Spain in 1927 for use as a hulk for carrying coal. There were several owners of the ship over its lifetime. They were - 1895, first owner, Charles Webster Corsar, Liverpool - 1902, the owner was D. Corsar & Son, Liverpool - 1909, owned by John Hardie & Sons, Glasgow - 1911, John Stewart & Co., Liverpool - by1915, James A. Young, London - 1926, L.H. Wilson, Liverpool - 1927, Ballener Espando (Brunn & van Lippe, Tonsberg).Photograph, black and white, of the ship "Monkbarns" , a steel hulled sailing ship under sail, bow facing viewer. Rectangular wooden frame has an inner gilt frame around a wide, natural bark matte. The lover edge of the matte has a decorative rectangular cut-out surrounding an inscription with the ship's name. On the back is a handwritten inscription about the ship and the presentation of the photograph..Front: "MONKBARNS" Reverse handwritten in pen: "PRESENTED TO A.F. WATSON / FOR S.S.V. BY / CAPT. F.K. BAXTER / 74 VERDON ST/ WILLIAMSTOWN " Reverse: "STEEL SHIP MONKBARNS / 1771 TONS REGISTER / 267 x 40' X 27'2" Draft / Build 1895 by McMillan, Dumbarton, Scotland / Converted to a hulk in /Spain 1927. / Photo taken in - Converted from NEWCASTLE N.S.W. about 1924"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, monkbarns, sailing ship, newccastle, new south wales, hulk

The aircraft (Serial Number 159 – registration VH-GNT) was assembled by RAAF Richmond Gliding Club from a kit manufactured by Schweizer Aircraft Corporation, Elmira, New York State, USA, in 1963. First flown 21 December 1963. Served at RAAF Base, Richmond, NSW, until December 1978 at which time it had recorded 1981 hours from 9870 flights. The aircraft was sold to Peter Fitzgerald and moved to Gosford and later on, to Queanbeyan where it was stored under cover until April 1983. It was not flown between 1978 and July 1983. In 1983 the glider was sold to Harold Walton. A Certificate of Airworthiness inspection was done by various members of the Canberra Gliding Club where minor repairs were made. On 24 July 1983, it first flew on the airworthiness certificate test flight at Bunyan, NSW, the home of the Canberra Gliding Club. In service at Bunyan until November 1986 the hours flown increased to 2078 from 10249 flights. A certificate of airworthiness inspection was completed on 11 April 1987 but the aircraft was apparently only recorded a few more hours by 9 January 1998 when it last took to the air. When donated to the Australian Gliding Museum in January 2020, the aircraft was in storage at premises of the donor, Harold Walton, at Walkerville, South Australia.This aircraft is the only one of the 258 SGS 2.22s produced by Schweizer to come to Australia. It is a good representative example of the SGS 2.22 type which featured metal construction for production of a robust club trainer. The aircraft apparently played a useful role over many years at Richmond and Canberra.High wing two seat utility glider of metal construction with fabric covering.Registration letters ‘GNT’ on each side of vertical stabiliseraustralian gliding, sailplane, glider, schweizer, raaf, richmond, fitzgerald, walton, canberra, bunyan.

John NEELY (1953- ) Born Leavenworth, Kansas, USA John Neely is the Professor of Ceramics at Utah State University. John has studied Ceramics in Japan, and lectured and conducted in workshops, including at the Gippsland Centre for Art and Design. He is an expert in the technology of clay, glaze and kiln firing with a keen interest in pattern and texture. After completing a Bachelor of Fine Art at Alfred Univerity, New York in 1975, John Neely participated in a one year Foundation Fellowship at Tokyo, Japan. The following year he was the recipient of a Rockefeller Brothers Fund One Year Fellowship in Tokyo, Japan. Neely completed a Ministry of Education Two Year Postgraduate Research Fellowship at the Kyoto City College of Fine Arts, Kyoto, Japan and was awarded a Master of Fine Art at Ohio University, Athens, Ohio in 1982. This work is part of the Jan Feder Memorial Ceramics Collection which was amassed with funds raised by Jan Feder's student peers at the Gippsland Centre for Art and Design in the mid 1980s after Jan Feder passed away. Although many of the works are donated the intention of the collection was to purchase from visiting lecturers who became leading ceramic artists around the world, as well as from many of the staff who taught at the Churchill Campus. Ceramic salt fired pot John Neely from Logan, Utah, USA, who was a guest lecturer at the Gippsland Centre of Art and Design (later Federation University Australia).ceramics, gippsland campus, jan feder memorial ceramics collection, john neely

Sloan's liniment was used in the late19th and early to mid 20th century. Originally used for horses but later advertised as good for Man and Beast.While the bottle of Sloan's liniment has historical value, the link with Warrnambool lies in the chemist's label of J Paterson who operated a business at 186 Timor Street, Warrnambool around the 1930s.Brown glass bottle with black metal screw-top lid. Bottle has a short neck. The indented rear has the maker's name imprinted. The black and white printed paper label has a picture of a man's head and wraps across the front and sides and has a red sticker with the Warrnambool retailer's name..Front: SLOAN'S/FAMILY/LINIMENT/(text obscured)/NEW YORK (obscured) ST LOUIS/NETT CONTENTS 2½ FL. OZS Left side: INSTRUCTIONS-Massage (obscured) gently with/fingers. Then (obscured) liberally with a soft/ flannel cloth or a piece of absorbent cotton. If skin is tender,/do not use./ CAUTION:-COMBUSTIBLE MIXTURE./Do not Use near Fire or Flame./Regd Vic 1173 Right side: EXTERNALLY: Recommended by us in the treatment of Muscu-/lar Congestion and Muscular Pain due to the exposure and fatigue or/of rheumatic origin, Lumbago, S--- and sc--- and s--- of/Muscles and Tendons, Neuralgia, (obscured), Stiff Neck, Backache, Bruises, Chilblains, Mosquito Bites and/stings of major non-poisonous insects. An Excellent Counter (obscured) Back: THIS BOTTLE ALWAYS REMAINS/ THE PROPERTY OF/CHAMBERLAIN'S PTY LTD/SYDNEY warrnambool, chemists, timor st, sloan's liniment, paterson j

The LHLG newsletter of 1918 features this image and notes that they accompanied their shipmaster father Captain Aviss, of the Barque Inverneill who with his wife Catherine Florence Aviss, travelling through dangerous European waters, brought the family of three children to visit Melbourne. The two children featured are Margaret and Ronald, born at sea in 1915. Their young sister, Ruth Neil, was also born at sea on the 27 August 1918. The family re-united with a first meeting for the children and grandparents, Captain and Mrs Frampton, who "had lost two ships to enemy submarines and were now on their third". The family participated in "a happy Communion service in our chapel , in which the parents and grandparents joined this formed the keystone of their visit to Melbourne". Unfortunately the young Mrs Aviss contracted the Spanish influenza on their arrival in St John, New Brunswick, Canada, she succumbed in November 1918 after spending a week in the Parks Hospital. Herbert Aviss was left with 2 toddlers and a 3 month old baby. He went back to England with his children in March 1919 on passenger ship, accompanied by a nurse. Martin Frampton and his wife were in New York at the time, but they probably learnt about Catherine's death in the local newspaper. A memorial plaque in her name unveiled in the chapel at the Mission in April 1919. The parents and grandparents left their names and signatures in the visitor book (0149) on the 28 April 1918.One of the rare stories of seafarer visits illustrated with a photograph of the children of a family accustomed to life aboard ship. The impact of influenza also affected this family and others are recorded amongst the supporters of the Mission and reflects the widespread impact that the epidemic of the post WW1 period had on people, Mission activities and restrictions affecting public events. Both Framptons and Aviss are noted in the annals of the Cape Horne society.Small monochrome photograph of two small children, a girl and a boy posed in front of the ship's wheel of a sailing vesselshipboard life, seafarer families, martin frampton, elizabeth frampton, herbert aviss, children, catherine florence aviss nee frampton, wwi, world war one, great war, first world war, german, submarine, u boat, torpedo, spanish influenza, flu, pandemic, st john, new brunswick, sea mites, wheel, boy, girl, margaret aviss, ronald aviss, ruth aviss, ruth neill aviss, ruth neill paterson nee aviss (1918-2017), ronald aviss (1915-1996)

GEOFFREY RICARDO )1964- ) Born Melbourne, Australia 1984-86 Bachelor of Arts (Fine Art), Printmaking, Chisholm Institute of Technology, Melbourne 1987-89 Printing Assistant at Bill Young Studios, Editioning intaglio prints, King Valley, VIC 1988 Full-time Studio Technician at Printmaking Department, Chisholm Institute of Technology, Melbourne 1989-90 Graduate Diploma (Fine Art), Printmaking, Monash University, Melbourne 1991 Traveled to England, France, Spain and USA (Winsor & Newton International Travelling Bursary, National Students Art Prize) Worked in private studios in Gaucin, Spain and New York, USA 1994-95 Master of Fine Arts, Monash University, Melbourne 1995 Guest Lecturer, Victorian College of the Arts, Melbourne Traveled to Europe and America 1996 Guest Lecturer, Royal Melbourne Institute of Technology, Melbourne 1990-98 Sessional Lecturer, Monash University, Melbourne 1998 Traveled to America and Mexico 2001-05 Sessional Lecturer, The Victorian College of the Arts, Melbourne 2003-10 Printmaking Workshops, Warrnambool TAFE, Warrnambool, VIC 2004 Traveled to Europe, Mexico and Cuba 2005 Lecturer, National Art School (Summer School), Sydney Sessional Lecturer, Monash University, Melbourne Lecturer, Institution of Koorie Education, Deakin University, Geelong, VIC Framed acquatint atchingart, artwork, geoffrey ricardo, ricardo, printmaking, etching, aquatint

GEOFFREY RICARDO (1964- ) Born Melbourne, Australia 1984-86 Bachelor of Arts (Fine Art), Printmaking, Chisholm Institute of Technology, Melbourne 1987-89 Printing Assistant at Bill Young Studios, Editioning intaglio prints, King Valley, VIC 1988 Full-time Studio Technician at Printmaking Department, Chisholm Institute of Technology, Melbourne 1989-90 Graduate Diploma (Fine Art), Printmaking, Monash University, Melbourne 1991 Traveled to England, France, Spain and USA (Winsor & Newton International Travelling Bursary, National Students Art Prize) Worked in private studios in Gaucin, Spain and New York, USA 1994-95 Master of Fine Arts, Monash University, Melbourne 1995 Guest Lecturer, Victorian College of the Arts, Melbourne Traveled to Europe and America 1996 Guest Lecturer, Royal Melbourne Institute of Technology, Melbourne 1990-98 Sessional Lecturer, Monash University, Melbourne 1998 Traveled to America and Mexico 2001-05 Sessional Lecturer, The Victorian College of the Arts, Melbourne 2003-10 Printmaking Workshops, Warrnambool TAFE, Warrnambool, VIC 2004 Traveled to Europe, Mexico and Cuba 2005 Lecturer, National Art School (Summer School), Sydney Sessional Lecturer, Monash University, Melbourne Lecturer, Institution of Koorie Education, Deakin University, Geelong, VIC This aquatint is one of a limited edition of 30 and was printed by Gunnell/Leighfield at Chrysalis Publishing. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.artwork, geoffrey ricardo, kangaroo, aquatint, printmaking, etching

GEOFFREY RICARDO (1964- ) Born Melbourne, Australia 1984-86 Bachelor of Arts (Fine Art), Printmaking, Chisholm Institute of Technology, Melbourne 1987-89 Printing Assistant at Bill Young Studios, Editioning intaglio prints, King Valley, VIC 1988 Full-time Studio Technician at Printmaking Department, Chisholm Institute of Technology, Melbourne 1989-90 Graduate Diploma (Fine Art), Printmaking, Monash University, Melbourne 1991 Travelled to England, France, Spain and USA (Winsor & Newton International Travelling Bursary, National Students Art Prize) Worked in private studios in Gaucin, Spain and New York, USA 1994-95 Master of Fine Arts, Monash University, Melbourne 1995 Guest Lecturer, Victorian College of the Arts, Melbourne Traveled to Europe and America 1996 Guest Lecturer, Royal Melbourne Institute of Technology, Melbourne 1990-98 Sessional Lecturer, Monash University, Melbourne 1998 Traveled to America and Mexico 2001-05 Sessional Lecturer, The Victorian College of the Arts, Melbourne 2003-10 Printmaking Workshops, Warrnambool TAFE, Warrnambool, VIC 2004 Traveled to Europe, Mexico and Cuba 2005 Lecturer, National Art School (Summer School), Sydney Sessional Lecturer, Monash University, Melbourne Lecturer, Institution of Koorie Education, Deakin University, Geelong, VIC Framed limited edition print of two running horses being ridden by numerous people. Donated through the Australian Goverment's Cultural Gifts Prorgram by Katherine Littlewood. geoffrey ricardo, available, horses, animals, horse racing

GEOFFREY RICARDO (1964- ) Born Melbourne, Australia 1984-86 Bachelor of Arts (Fine Art), Printmaking, Chisholm Institute of Technology, Melbourne 1987-89 Printing Assistant at Bill Young Studios, Editioning intaglio prints, King Valley, VIC 1988 Full-time Studio Technician at Printmaking Department, Chisholm Institute of Technology, Melbourne 1989-90 Graduate Diploma (Fine Art), Printmaking, Monash University, Melbourne 1991 Traveled to England, France, Spain and USA (Winsor & Newton International Travelling Bursary, National Students Art Prize) Worked in private studios in Gaucin, Spain and New York, USA 1994-95 Master of Fine Arts, Monash University, Melbourne 1995 Guest Lecturer, Victorian College of the Arts, Melbourne Traveled to Europe and America 1996 Guest Lecturer, Royal Melbourne Institute of Technology, Melbourne 1990-98 Sessional Lecturer, Monash University, Melbourne 1998 Traveled to America and Mexico 2001-05 Sessional Lecturer, The Victorian College of the Arts, Melbourne 2003-10 Printmaking Workshops, Warrnambool TAFE, Warrnambool, VIC 2004 Traveled to Europe, Mexico and Cuba 2005 Lecturer, National Art School (Summer School), Sydney Sessional Lecturer, Monash University, Melbourne Lecturer, Institution of Koorie Education, Deakin University, Geelong, VICFramed etching with aquatint depicting a silhouette of man in front of a bonfire. Donated through the Australian Government's Cultural Gifts Programme by Katherine Littlewood.LowerLHS 'State AP' Lower RHS 'Ricardo'geoffrey ricardo, bonfire, printmaking, available