Rectangular calculating instrument with (1) 'hinged lid' fitted with circular rotating dial for setting/reading altitude, speed, distance and temperature, (2) notebook inside lid, (3) circular dial with perspex cover, beneath which is (4) graph chart, moveable up-and-down by means of rotating knob on side of device. Curved brackets and elasticized straps on back for strapping onto pilot's leg.R.A.A.F. Ident. No. G6B/145 Serial No. WG/2233 COMPUTER NAVIGATIONAL Mk. III D. (Other inscriptions including instructions for use and scales for various measurements) "AB" hand written on strap (owner's initials?)

Photograph.The Madge Simmons Collection. Quarry Hill School Boys Band 1935. Black and white photograph mounted on cardboard. Twenty-four boys and instruments, two adults - principal and bandmaster? The banner is behind the group. The photographer's name is printed on the bottom right corner - A. G. Bugg Photo. On the back is written in ink: Quarry Hill Boys Band 1935. 10 months old.bendigo, education, quarry hill primary school, quarry hill primary school. quarry hill primary school boys band. brass bands.

Sepia photo on cream board. Mixed group of people at a musical function (in doors). Ornate ceiling + Drapes. 4 framed painting on wall. 5 people from musical group, with brass instruments, 4 music stands. Another 7 people standing to the left. In front, are back view of audience members (Seated). Inscription: Handwritten 'Reg V. Brock/of Bendigo', 'V1599 1'Reg V.Brock Bendigoperson, group, musical function

Sepia photo. 67th Battalion, large number of men, in the front 2 rows have music instruments. Markings/Inscriptions: 67 Batt is written on the trees centre rear. X1572 bottom of photo on the left. Bottom right corner of board: Phone 4397. 'Darge'1,5 Collins St, Melbourne. On rear in hand writing is Broadmeadows February 1917. Golden Square 31 Aug '22.Darge, Collins St, Melbourneorganization, military, 67 batallion, darge, collins street, melbourne. ph 4397

The Bocian is a versatile training sailplane that first flew in 1952. The type has been modified in several respects over the course of production by SZD (tailplane and rudder in particular). About 600 have been built; many for export to 27 countries (including Australia). The aerobatic capability and fine performance (best glide ratio of 26) has enabled the Bocian to be used to train competition pilots as well as those of lesser experience. Many world gliding records were set in the 1950s and 1960s in Bocian gliders. The Museum’s example is a type D test flown in Poland on 3 and 4 April 1963. It was imported into Australia in September 1963 by Austerserve Pty Ltd. The first owner was the Alice Springs Gliding Club and the glider had name “Cumulus” painted on the side of the fuselage (since removed). The glider had recorded 726 hours 46 minutes flying time from 2138 launches as at July 1967 when it was transferred to the Darwin Gliding Club. It appears that the glider was damaged in June 1968. The substantial repairs to the fuselage, both wings and tailplane and other minor repairs were completed on 13 October 1968. The glider continued flying with the Darwin Gliding Club until August 1969 at which time the service to that club amounted to 59 hours 7 minutes flying time from 348 flights. Between August 1969 and August 1976 no flights are recorded in the logbook. It is understood that on its last flight at Bachelor, south of Darwin in the Northern Territory (August 1969) it was severely damaged when it crashed after spinning while being auto-tow launched (although this is not expressly mentioned in the logbook). Reg Hancock purchased the damaged glider and rebuilt the port wing and restored it to airworthy condition (September 1976). It was then transferred to Colac, Victoria, and used by the Colac Gliding Group at the Yeo airfield until February 1981, adding another 153 hours from 403 flights to the glider’s record. After airworthy inspection in September 1982 the glider was used by the Geelong Gliding Club until 1983 (logbook details not held). The 20 year survey was then due and the glider fell out of service. In the course of the most recent restoration attempt it was discovered that the glue used in construction had deteriorated and that it was no longer feasible to bring it back to an airworthy condition. Subject to restoration, this exhibit may be representative of the 1950s - 1960s Bocian two seat sailplane typeThis exhibit is a large two seat glider /sailplane of wood and fabric construction. All components are present with the exception of instruments. However, at the time that the aircraft was transferred to the Museum it had been taken apart for major restoration work. As received it is stripped of the top coats of paint and a number of components (including, amongst others, tip fairings, nose cone and cockpit elements) that were removed for facilitating the repair process. The glider, serial number 803, was registered as VH-GNLaustralian gliding, glider, sailplane, bocian, cumulus, alice springs gliding club, darwin gliding club, colac gliding group, geelong gliding club, hancock

Five miscellaneous steel tools: * one spanner, 205mm L x 50mm W, marked Fairmount Cleve, with W etched on reverse side * a pair of dividers, 130 mm L x 50 mm W (closed), discernible name marked on instrument * three miscellaneous tools, 122-232 mm long Items stored in Pittock coach builders box, reference 13000.

Black and white photograph of a demonstration of a dental procedure on a patient who is receving anaesthesia. An anaesthetist standing on the right is supporting the patient's mandible and administering anaesthesia to the patient through an inhaler. A second person's hand is holding a mouth gag dental instrument in the patient's mouth. The background of the photo has been covered with black ink so that only the patient, anaesthetist and hand of the third person are visible.•Printed text in black ink on paper label glued under photo: Supporting the Mandible : the Anaesthetist's Stance. •Handwritten with blue ink on reverse: Photo. 7. / (Frame 22).dental procedure, anaesthesia, anaesthetist, patient

The Forests Commission began using computers in the 1960s for resource inventory under the Chief Forest Assessor Murray Paine IBM introduced the Port-A-Punch in 1958 as a fast, accurate means of manually punching holes in specially scored IBM punched cards. Designed to fit in the pocket, Port-A-Punch made it possible to create punched card documents anywhere. The product was intended for "on-the-spot" recording of data such a assessment plotsThe IBM Port-A-Punch prepared computer data and programming cards. Normally there is a a separate stylus pen, similar to a ball-point pen to punch the holes in the cards, but it is missing This instrument consists of a plastic frame that holds 13 long plastic rectangles along its length. A transparent plastic template which has an array of evenly spaced holes fits over the rectangles, and cards are placed over this. IBM Portapunchforest measurement

Bendigo performance of ''Serenade to Sun Loong'' 27/7/1997 at Golden Dragon Museum. Concert presented with AB and Museum in conjunction. Collection of various material related to the concert: Background information re instruments and performers (Shen Pangeng - on the Erhu and Sun Ping - Classical & Folk Dancer); press release information; associated correspondence ; financial details (loss) re the performance; copies of program; tickets.

A rectangular cream Ivory style relief carved panel of ten Ancient Greek figures playing and listening to musical instruments played outdoors. They are wearing robes; some are standing and some are sitting on or near rocks and a plant. The artwork has a mottled wooden frame and gold painted cardboard mount. It is covered by celluloid or plastic to protect the carving. The backing is wooden with small screws holding it all together.The whole sculpture is carved in fine detail.relief engraving, objects of vertu, carved picture, ancient greece, carvings

Mounted black and white photograph titled "Coburg Tramway Band - 1918", mounted onto embossed black card with the studio photo stamp in gold colour. Features 40 men, 30 in uniform with instruments and 10 men in suits. Has in the background a MCBTT S class tramcar with the Trust depot office block behind. Made by Darge studio, 175 Collins St Melbourne.trams, tramways, coburg, bands, mbctt, coburg depot, s class

The cornet was owned and used by W H Nicholls, a member of the Linton Brass Band, most likely in the 1890s or early 1900s. The cornet was donated to Linton & District Historical Society in 2017 by Robyn Nicholls, of Blackburn. It is understood in the Nicholls family that Robyn's late husband, Graeme Nicholls, inherited the cornet from his great-grandfather, William Henry Nicholls (1845-1902). However it is also possible that the cornet was owned and played by Graeme's grandfather, also named William Henry Nicholls (1880-1943).Brass cornet with mouthpieces, in original dark wooden case which has red fabric lining. Instrument is approximately 30cm in length, has a 12 cm bell and three valves. A small portable sheet-music holder is also in the carrying case. The manufacturer's name "Gautrot Brevete, Paris" is imprinted on the bell, along with the inscription "Exposition Universelle de Paris, 1889, Medaille d'Or". EXHIBITION / UNIVERSELLE / DE PARIS / 1889 / MEDAILLE D'OR / Gautrot Brevete / PARIS.linton brass band, musical instruments

Boyd designed the exhibition for the opening of the Australian Chancery in Washington DC held in June 1969. He designed six cylindrical clear acrylic display cases. One of these exhibits used an anamorphic optical illusion, using compressed images which had normal proportions when viewed through a lens of the half-cylindrical display cases. The bookends (item F157) were designed as a small scale model for the Chancery exhibition. Placing this disc underneath the adjacent two half-cylindrical bookends demonstrates how the bookends behave as a lens. This model was created for the House of Ideas exhibition, made by a University of Melbourne, Melbourne School of Design Masters student.Anamorphic image on circular discaustralian chancery, robin boyd, ohm2022, ohm2022_3

The plane table instrument was a simple but very effective early method of producing maps. Some very early editions were produced by the Australian Survey Corps after its formation in 1915 using this method. This manual details how to use the "Plane Table" for Surveying purposes.Hard Cloth covered Covers front and back, paper pages. title page has rubber stamp impressions (see below). Contents page, symbols page, pages 1-47 and index page.Adhesive label on front "46.10 and 12411", "1504" in purple also on front cover, Numbers inside front cover - "Acc. No. 000076" and crossed out. "scm - B0 - 86-72" written underneath. stamps- Australian Intelligence Corps, Headquarters library No 150 (difficult to read) on first page and stamped "CANCELLED" , Stamp School of Military Survey Library Call No 526 - 9825 LOV. Another stamp on title page - Department of Defence Library 46.10 and 12411. Second stamp 2/D. M.O.S. 2012 with CANCELLED. royal australian survey corps, rasvy, army survey regiment, army svy regt, asr, fortuna

Galvanometers are an instrument used for detecting and measuring electric current. They had a magnetic needle moved by the magnetic field produced by coils carrying the current to be measured, and the earth's field had to be taken into consideration. They were used to detect current in either direction in telegraphy systems, and to test equipment.Post Office Galvonometer. A hinged polished timber case with three brass terminals at the top, and ring (handle) and a dial (0 to 70) with an indictor needle. The opened box reveals wires leading to the terminals with two compartments covered in blue woven material (possibly silk).telegraph works, galvonometer, scientific instruments

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a child size, with a light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has stamped the manufacturer name and the place where it was made at the back of the blade.Stamped on the back blade base, Longworth / MADE IN ENGLANDmacintosh, blade, longworth, paediatrics, light bulb

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Macintosh semi curved blade designed in a child size, with a light bulb attached to the blade and a hinge attached to the back side of the base. Several scratches and deep hit marks over its surface caused by its previous use. This piece also has visible old dust spots and stains. Its contact stud is in a well condition and does not has any inscriptions. macintosh, blade, paediatrics, light bulb

"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb

Maws were a well known British medical instrument and supply manufacturer. Originating as J and S Maw in 1828, the company changed names a number of times and was renamed Maws Pharmacy Supplies Limited in 1940. It continued trading as such until the company was sold to an American company (ITT) in 1973. Clear glass feeding bottle with four rounded edges, tapering to s short neck. Calibrations for ounces and mls imprinted on opposite sides of the bottle. Bottle in inscribed "MAWS" and "HEAT RESISTING". On base, "MADE IN BELGIUM".infant feeding, infant care

Smiths began with a craftsman named Samuel Smith who in 1851 opened a shop in Newington Causeway, London, where he made and sold watches, clocks and precision instruments. Samuel had a son, Samuel Jnr who was apprenticed in his fathers business. Samuel Jnr eventually opened his own business at 85 Strand and later opened other premises at 9 Strand, Trafalgar Square and 68 Piccadilly. In 1899 he turned his business into a private limited company, S. Smith & Son Ltd. Samuel Jnr son, Sir Allan Gordon-Smith, joined him as Manager at 9 Strand in 1903 and laid the foundation of the vast Smiths organisation of the future, leading the company towards the supply of accessories for the then developing motor industry making car clocks and the first speedometers patented in 1904. In July 1914 a new company was formed under the name S. Smith & Sons (Motor Accessories) Ltd., to take over the motor accessory business of S. Smith and Son Ltd. and this became the main company of the group which eventually grew to become Smiths Industries Ltd. The original company S Smith and Sons Ltd., continued as jewelers and clock and watchmakers until 1930 when the company was taken over by Bravingtons retail jeweller chain. In 1931 Smiths decided to enter the domestic clock market and formed a new company, Smiths English Clocks Ltd., as the Clock and Watch division of S Smith & Sons (Motor Accessories) Ltd. This is the start of "Smiths Clocks" because this is when they began to manufacture domestic clocks in quantity. Moreover, they set out to produce these clocks at a price that the average householder could afford. S Smith & Sons (Motor Accessories) was at this time was the main company in the Smiths group of companies and their business developed both in the motor vehicle field and outside it. Smiths began to make automatic pilots for aircraft and, through the acquisition of a majority interest in Henry Hughes & Sons Ltd., entered the field of marine instruments. During the war from 1939 to 1945, Smiths' production expanded. There was a demand for motor, aircraft and marine instruments for the Services and the production of industrial instruments and it is at this time that our item was made. In 1944 many changes were made to the Smiths' organisation. The name of the principal company was changed from S Smith & Sons (Motor Accessories) to S. Smith & Sons (England) Ltd. and four new subsidiary selling companies were set up. These were Smiths Motor Accessories Ltd., Smiths Aircraft Instruments Ltd., Smiths Industrial Instruments Ltd., and Smiths English clocks Ltd. The manufacture of clocks and watches ceased in 1979 and 1983 saw Smiths withdraw from producing items for the motor industry.An item that is now regarded as a vintage, sought by horology collectors worldwide and is in excellent condition. The item is unique in that it was made specifically for ships by the Smith company a well known British clock manufacture. Its provenance is well established and it was made during the world war II era specifically for merchant and naval vessels of the time. Naval brass ships bulkhead clock. The clock face is of white enamel with black Roman numerals, an outer minutes ring and black steel hands. There is a subsidiary seconds dial with sweeping hand just above the centre and a fast/slow adjustment lever above that. There is no manufactures name on the dial. There are a beveled glass and brass hinged lid to the front of the clock. The clock is housed in a heavy brass case with screw holes around the circumference for mounting. There are no markings on the clock or mechanism flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, s smith and sons, clock, maritime clocks, clock makers, bulkhead clock

An Octant is a doubly reflecting navigation instrument used primarily by sailors to measure the angular distance between two visible objects and was a forerunner of the sextant. The name comes from the Latin octo, or “one-eighth of a circle,” for the Octant’s arc which spans 45°, or one-eighth of a circle. The primary use of an Octant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation. The estimation of this angle is known as sighting or shooting the object, or taking a sight. The angle, and the time when it was measured, can be used to calculate a position line on a nautical chart (latitude), for example, sighting the Sun at noon or Polaris at night (in the Northern Hemisphere) gives an angle by which the latitude can then be estimated. Sighting the height of a landmark on land can also give a measure of distance. History: The principle of the Octant as an instrument to measure ones latitude was first implemented around 1742-present but was superseded by the improvement of the octant to a sextant, a very similar instrument, better made and able to measure bigger angles 120°, allowing the measurement of Luna distances to give longitude when used with an accurate chronometer. The sextant started to appear around 1730 and had been attributed to by John Hadley (1682–1744) and Thomas Godfrey (1704–1749), but reference to the sextant was also found later in the unpublished writings of Isaac Newton (1643–1727). Earlier links can be found to Bartholomew Gosnold (1571–1607) indicating that the use of a Sextant for nautical navigation predates Hadley's implementation. In 1922, the sextant was modified for aeronautical navigation by Portuguese navigator and naval officer Gago Coutinho. Henry Hemsley was a lesser-known instrument maker and optician working in London in the late 17th and early 18th century. However, it should be noted that there were two Henry Hemsley opticians and instrument makers around this period. (Henry Hemsley 1, 1786-89, who had premises at 85 Fleet St London and Henry Hemsley 2, 1828-56), whose workshop was at 135-138 Radcliff Highway London. Therefore, based on the inscribed workshop address Henry Hemsley 2 is responsible for making this example.The octant is representative of its type and although not fully complete it demonstrates how 18th and 19th-century mariners determined their latitude on a chart to navigate their way across the world's oceans in the 18th and 19th century. It also demonstrates the skill and workmanship of the early instrument makers that operated from London at this time and provided most of the navigational instrumentation use by commercial and military navies of the time.Octant, ebony wooden frame and handle. Scale is missing from recess in frame. "H. Hemsley 135-138 Ratliff Highway, London", no box"H. Hemsley 135-138 Ratcliff Highway, London"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, navigation, navigational instrument, instrument used for navigation, sextant, henry hemsley, instrument maker, london, octant

Bushfire behaviour is influenced by many factors including temperature, relative humidity (RH), forest type, fuel quantity and fuel dryness, topography and even slope. Wind has a dominant effect on the Rate of Spread (ROS), as well as fire size, shape and direction. Temperature and relative humidity have major impacts on fuel dryness and therefore upon the availability of fuel for combustion. A thermo-hygrograph measures and records both temperature and humidity. It produces a continuous record by drawing ink traces on a paper chart held in revolving cylinder. Humidity is measured by shortening or lengthening of specially treated horse hair. Temperature is measured by means of a bi-metallic strip. This particular instrument is a seven day recorder. The instrument is driven by clockwork. Thermo Hygro GraphNegretti & Zambra

Thomas Walker & Son was internationally renowned in the manufacturing of ships logs. Founding father Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ships log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean) and the most common log in use for two generations. It took till 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. This ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades. Ship Log, three analogue dials calibrated in increments of Miles, the Rocket Log is a nautical instrument for measuring a vessel’s speed and distance traveled. The floating log was drawn behind the ship over a fixed time period in order to measure the distance traveled. The counter could measure enough miles to cover the maximum distance traveled by a ship in one day. The log has two distinct parts; a brass register, made by Walker, showing the distance recorded and the rotator made by Reynolds, that spins in the water driving the counter. both parts are connected by a linked chain. The register has a cylindrical brass body approx 4.5 cm diameter containing registering mechanism with hardened steel bearings. Distance is indicated by the three pointers on enamel plate as follows: graduated every 10 miles from 0-100; every mile from 1-10; every 1/4 mile from 1/4 -1. A brass sling and eye secured to the body enables it to be attached to the taffrail. The original rotator would have had a cylindrical tapered wooden body, approx 4.5 cm in diameter with three metal alloy fins or could be all made from brass. A towing eye is fitted to the tapered end. The two pieces of apparatus are connected by a length of linked chain, length 22.9 cm."Walkers Rocket Ship-Log Birmingham (Patented)" printed on face-plate. "Made by Thomas Walker".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship log, rocket log, mechanical ship log, measuring instrument, marine instrument, nautical instrument, speed recording instrument, ship log register, walker ship log, walkers rocket ship-log, thomas walker, thomas walker & son, thomas ferdinand walker, walker log business, reynolds ship log rotor, taffrail log, taff rail log, west india association

The Orbost Workers' Band was started in 1889 by Donald and Archie Munro. The band folded after the town was devastated by floods in 1893. Charles Spink reformed the group in 1905. It split in 1908 and the breakaway band was named the Orbost Workers Band. The two bands, The Orbost Workers and Orbost Town Band would often compete against each other. Eventually, in 1913, the two bands amalgamated to form the Orbost Municipal band. The old Orbost Municipal Band recorded its last meeting in 1941 -a lack of effort and membership. The new Orbost Municipal Band was restarted by Clem Heather (a previous member) on Wednesday 20th September, 1961 and continued into the late 1980s when lack of interest caused it to become defunct. Members of the 1910 Orbost Workers' Band in the photograph are from back and left to right : Bill Whillance; Vic Lawless, Tom Reeves, August Redenbach, Alex Stirling, Bert McCoy, Bill Stirling, Ray Napier, Ted Swan, Albert Hight; George Jackson, Jack Richardson, Bill Clark, Wally Swan, Arthur Redenbach, Brick Richardson, Jack Healey, Dave Williams; Ossie Wehner, Charles Black, Val Perry, Charlie O'Brien, Arch Lavell; Tom Swan and Harold NapierThis is a pictorial record of the Orbost Brass Band. The various Orbost bands over the years played a major role in community activities providing entertainment and musical experiences for the many members.A black / white photograph of band members with their instruments. In the fron row are two,small boys sitting on either side of a drum. Behind them is a row of young boys, the one on far left holding a small dog. Another row is kneeling behind them and a row is standing at the back with one man centre back by himself. They are all dressed in suits or uniforms. The photograph has been glued onto cardboard.on back - "Flavel, 1910"orbost-municipal-band spink-charles heather-clem

The book was published for the use of personnel of the army, navy, marine corps and coast guard. The book was used by Charles Bacon who studied at the University of Nevada in the late 1930s/early 1940s. Bacon worked at Bunker Hill Mines and Kellogg Idaho, before arriving in Australian in 1951. He worked for CN Myers, a company involved with paper converting. CN Myers was a family business (on Charles Bacon's maternal line).Blue soft covered book of 607 pages. Chapters include electrical Algebra, fundamentals of Electricity, Wiring, Magnetism, Armature Wiring, Generators, Motors, Controllers, Geometry and Trigonometry, Alternating Current, AC Circuits, Transformers, Polyphase Systems, Alternators, Induction Motors, Stator Winding, Multi-Speed Induction Motors, AC Controllers, electrical instruments, Electron Tubes, Welding Systems, Welding Systems, electrical Drawings. charles bacon, mining engineering, metallurgy, university of nevada, armed forces, world war 2

Black and white photograph of a demonstration of a dental procedure on a patient who is receiving anaesthesia. Dr Geoffrey Kaye, wearing a white gown, is inserting a mouth gag dental instrument into the patient's mouth. The anaesthetist's hands are supporting the patient's head and administering anaesthesia to the patient through an inhaler. The background of the photo has been covered with black ink so that only Dr Kaye, the patient, and hands of the anaesthetist are visible.•Printed text in black ink on paper label glued under photo: Inserting the Gag under Vision. •Handwritten with blue ink on reverse and underlined: Photo. 2.anaesthesia, dental procedure, anaesthetist, patient, geoffrey kaye

Black and white photograph of a demonstration of a dental procedure on a patient who is receiving anaesthesia. Dr Geoffrey Kaye, wearing a white gown, is changing a mouth gag dental instrument in the patient's mouth. The anaesthetist's hands are supporting the patient's head and administering anaesthesia to the patient through an inhaler. The background of the photo has been covered with black ink so that only Dr Kaye, the patient, and the hands of the anaesthetist are visible.•Printed text in black ink on paper label glued under photo: Changing-Over the Gag. •Handwritten with blue ink on reverse: Photo. 4. / (Frame 20).dental procedure, dental instrument, anaesthesia, anaesthetist, patient, geoffrey kaye

Black and white photograph of a demonstration of a dental procedure on a patient who is receiving anaesthesia. Dr Geoffrey Kaye, wearing a white gown, is holding the patient's jaw and is placing an instrument inside the patient's mouth. An anaesthetist's hands are supporting the patient's jaw and administering anaesthesia to the patient through an inhaler. The background of the photo has been covered with black ink so that only Dr Kaye, the patient, and the hands of the anaesthetist are visible.•Printed text in black ink on paper label glued under photo: It takes Two to support the Mandible. •Handwritten with blue ink on reverse and underlined: Photo. 6. / (Frame 23).dental procedure, dental instrument, anaesthesia, anaesthetist, patient, geoffrey kaye