Two part object. (1) An AMF/Head (possibly 'Edge' model) tennis racquet, featuring: twin shaft, aluminium alloy frame; brown plastic bridge; nylon net strings; brwon leather handle grip; brown plastic shaft casing; and, black plastic butt cap. 'Triple Head' logo features on adhesive label on bridge. No model name visible. Etched into sides of both shaft pillars are owner's details: 'CATHERINE BONE/ 318 50 OAKS/265-1665'. (2) AMF/Head brand cover for racquet head and throat. White vinyl with brown, tan and chocolate branding across centre. Plastic zipper with metal pull tab. Materials: Metal, Plastic, Nylon, Adhesive tape, Leather, Adhesive label, Vinyltennis

The mitre trimmer is a classic hand-powered tool for picture framers and trim carpenters that has remained relatively unchanged for decades. It is heavy, simple, and sturdily built of cast iron with tempered steel guillotine blades. It is used for taking super accurate, paper-thin slices off the ends of mitres and butt joints, and leaving behind a glassy-smooth surface. Also used in picture frame making or cabinet woodworking, by placing a piece of timber in one side after setting the desired angle and pulling a handle that operates a guillotine blade thereby cutting the timber or decorative trim to the required angle.A significant tool still in use today in many cabinet makers workshops. The subject tool gives insight into how this type of tool development, design and use has not progressed since it’s original invention. It is still for sale from many tool manufacturing companies and use in small craftsmen boutique workshops today as it was many decades ago.Cast Iron wood Trimmer bench like construction on raised feet with 2 adjustable gates. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cabinet makers tools, picture framing, mitre cutting, wood trimming

One of a series of five photographs taken from the same position on the southern side of Ryrie St. at the intersection of Garden St., East Geelong/. Trams are stabled on a stub termonis that could take at least five cars in Ryrie St. The East line, opened in stages in 1923, curves off to the right. Patrons are walking to the trams following the end of a football match at Corio Oval, 0.5km to the east. The photo shows motorised trailer No. 12 pulling one of the two remaining trailers, both heavily loaded. Its destination is WEST GEELONG. Date is likely to be winter 1923 -4 or -5. Yields information re early Geelong Tramways infrastructure and social life.A black and white print on paper8-1 written in pencil on the back of photographgeelong football tram, garden and ryrie sts, east tramway line, corio oval, motorised tramway trailer

A team photograph of the 1952 Australian Rules Football team from the Greensborough Football Club. Includes players and support staff. This photograph is a record of those involved with the club in a Premiership year 1952.Black and White photograph of the Greensborough Football Team 1952. Includes name of players and support team. Mounted on brown card. Greensborough Football Club. Premiers 1952. Team names: Standing at rear: H. Cockbill (Committee) J. Richards (Committee) E. Elliott (Vice President) J. Lawrence (Vice President) K. White (Committee) R. Tooth (Treasurer). Back row: L. Hall (Trainer) C. Cook (Trainer) R. Ormsby D. Wickes R. Sondemeyer D. Franklin G. Hughes A. Montfort W. Dodds H. Wasley(Goal umpire) Centre Row: W. Cecil (Secretary) R. Towler D. McDowell P. Adamson (Captain and Coach) Dr E. P. Cordner (President) F. LeGassick G. Coventry G. Driver Front Row: D. Hall E. White N. Brooks R. Sherriff E. McDowell J. Elygreensborough football club, premiers 1952

It's encouraging to see my city using poetry in such a public way. The park itself is a humble one, which suits these little poems perfectly. If you're ever in town come and take a seat for a while. The poem 'Little Bridge' by Nathan Curnow was commissioned as part of a placemaking project in Little Bridge Street Pocket Park, Ballarat in 2018. The Park was redesigned to include more passive surveillance, and improved amenity to increase community safety in the area. The poem is engraved onto seating to provide a rest and point of interest space in the small park. Six seats featuring an engraved poemPut it all down and take a seat/ Pull out a snack from your shopping/ Listen to the trumpeter busking a tune/ With every visit this park is growing/ Killing time takes real devotion/ Stare at the flags and masts of your town/ And the buses come rolling down Bakery Hill/ It may be cold but we lean to the sun/ If you feel like a square of the Eureka flag/That’s hopelessly lost and tattered/ Remember you’re as precious as a corner-piece/ We search for you first to get started/ There is something big on Little Bridge/ Not a beanstalk that leads to a giant/ But another day in the life of Ballarat/ All of this gold at the surface poetry, little bridge street, ballarat

This chainsaw was one of the earliest models sold in Australia. It was manufactured by the Lombard company which was established in 1894 when Nathaniel Lombard developed the first practical water wheel governor in Roxbury, Massachusetts, USA. In 1904, the company moved to Ashland, Massachusetts. During the first World War, Lombard Governor produced hydraulic lathes for the manufacture of artillery shells At the conclusion of the war, Lombard expanded into the areas of chain saws and plastic molding injection machines. This model, the L-30 was only produced for 2 years from 1962 - 1964, primarily due to safety concerns and the fact that it did not have any way to sharpen or tighten the chain. This chainsaw was sold by Mann of Wodonga and donated to the Wodonga and District Historical society by David Mann, owner and manager of Mann Wodonga.This item is significant as it was produced for a limited time. It was also sold by a prominent Wodonga business.A single operator chain saw from Lombard, Ashland, Massachusetts, USA. The chainsaw was relatively lightweight but had no safety features such as a chain brake. It was made primarily of sand cast magnesium. The main cylinder was constructed of aluminium with a cast iron sleeve. It had a manual oil pump, the crankshaft operated on ball bearings and it had a maximum rpm of 4,500. See the Model profile in the accompanying Media item for details.On side of fuel tank: "ONE HALF PINT/SAE-30 OIL/ FOR EACH/ GALLON GASOLINE/ MIX WELL IN SEPARATE CONTAINER/BEFORE FILLING" On opposite side: "STARTING INSTRUCTIONS 1: FILL FUEL TANK WITH PROPER FUEL MIXTURE ( AS NOTED ON TANK) 2. FILL OIL RESERVOIR WITH #30 MOTOR OIL 3. CLOSE CHOKE, MOVE LEVER BACK TOWARDS AIR FILTER 4. HOLD THROTTLE WIDE OPEN 5. PULL STARTER HANDLE SLOWLY UNTIL STARTER ENGAGES, THEN GIVE IT A SHARP YANK 6. AS ENGINE WARMS UP, EASE CHOKE LEVER TO OPEN POSITION"hand tools, vintage chainsaws, david mann, mann wodonga

Bullock teams and bullockies were common sights in Australia in the 19th and early 20th centuries. Bullock teams were used for the transport of heavy goods such as wool, wheat, timber, sugar cane, farm equipment, building supplies etc. and their presence and that of their colourful bullock drivers in the countryside have become part of Australia bush folklore. Bullocks were often favoured over horses as they could pull heavy loads over rough surfaces and were less expensive to maintain. As the bullock teams frequently varied in size (up to 40 bullocks have been recorded in the one team) the whip was always a very long one. This item is of considerable significance as a memento of the days (19th century and early 20th century) when bullock teams were the common form of transport for heavy goods. As in other parts of Australia, bullock teams were a feature of the area around Warrnambool and created much interest when they arrived in the smaller towns. This is a wooden stick, slightly tapered to the top, with a leather binding at the top with a small knob. Attached to the top of the stick is a whip made of plaited leather. The leather is brown and stained and slightly worn. At the end of the whip is a strip of plain leather with a knot at the end. bullocks and bullockies in the western district, warrnambool, history of warrnambool

Advised of the tragedy by one of the stockmen Ellen O'Hara drives the gig towards Overton, but meets Klinberg who tells her the police have found a body near Nugent's place. Ellen gets there as Nugent is pulling Keiran's body from the river. Shock grief, and old bitternesses unhinge her mind. Seizing Trooper Ryan's pistol from on top of his clothes she shoots Nugent dead, and bolts up a rough back track towards her home with the police in pursuit. Her pony falls while belting along a narrow, dangerous piece of the track, and the gig goes over a cliff. Ellen is killed.The album and images are significant because they document literature written by a prominent member of the Wodonga community. The presentation of this precis was supported by several significant district families and individuals.Ringer's River Album Coloured photo Plate 32des martin, many a mile, ringer's river, northeast victoria stories

Waterproof vinyl package (packet opened) rectangular in shape. Discoloured on outside olive green drab on inside. has a tear strip. Gauze bandage attached to stretch material bandage. Packet. on Front. 6510-66-108-4140 DRESSING,WOUND *sterile compressed for field use. CAPO 7830065AC Lot number B93433 Smith + Nephew * Inner Pack Contains Sterile Dressing Date stamped "2 May 1994" Packet on Back To open tear down here. DIRECTIONS FOR USE Retain outer bag. Remove dressing from inner bag. Grasp bandage and pull pad open. Place face of pad onto wound. Place outer bag on to the other face of pad and bandage. Wrap bandage around and tie or pin bandage as required. DO NOT HANDLE WOUND OR PAD. (Recorded on Dressing) OTHER SIDE TO WOUND.

Reverend Alexander Morton was the Presbyterian minister in Orbost between 1894 and 1904. Rev. Alexander Morton earned great respect from the Orbost community, during his ministry here between 1894-1904. He brought with him from the New Hebrides timber which was used for the pulpit. Affectionately known as “Sandy” Morton, he was very friendly and endeavoured to reach all his bush parishioners, often on horseback. He was known up the Gelantipy Valley as an itinerant Preacher with a difference, he often doubled as a dentist, who was quite adept at pulling teeth, often with a pair of pliers. ( information from Margaret Smith Newsletter August 2012)Reverend Alexander Morton was a prominent Orbost citizen in the late 19th - early 20th centuries. He was associated with the Presbyterian Church in Orbost.A black / white portrait photograph on a dark grey buff card. It is a head and shoulders posed photograph of a bearded man in a suit.on back - Rev. Alex Morton, Presbyterian Minister at Orbost"morton-alexander presbyterian-church-orbost

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.Steel. Designed with bow in middle of blade. Small offset. Original ends in good conditions. No handles.churchill island, crosscut, saw, tool

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.one end original minus handle. Other end has replaced handle. Steelchurchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, increasing efficiency.double ended steel saw with "M" patterned teeth. Handles missing. All rivets in placechurchill island, crosscut, saw, tools, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division.single handed cross-cut saw. Peg grip missing?circular brass manufacturer's plate: SPEAR & JACKSON Sheffield. Crown symbol.churchill island, crosscut, saw, tool, machinery

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” steel blade, wooden handle and peg grip. Single person sawcrosscut, saw, churchill island, tool

These items are of a high quality and would have come from a household where the occupants had considerable means. It was not common to have silver plating on both of these items. Shaving brushes and strops were essential items for men shaving their faces regularly until the mid to late 20th century when electric shavers became more common. These two items are attractive ones and are retained because they represent a household item of the past and they are a rare example of a shaving strop enclosed within a case. They will be useful for display. .1 This is an extending razor strop made of brown leather. It has a heavily patterned silver handle attached to the leather by metal studs and it is contained within a cylindrical case of plated silver. The case has a heavily-patterned curved base and top and on one side there is an oval outlined space in which to put initials or an inscription. The case has a handle on one end to match the strop handle but this handle is for hanging the item on a hook to keep it upright and stable. This would then enable the user to pull hard on the other handle to use the strop to sharpen a razor .2 This is a shaving brush made of horsehair or other animal hair. It has a silver-plated handle with a double ridge in the middle. It was used to lather a person’s face or skin with cream or soap to lessen chafing during and after shaving. The silver on both items is a little tarnished. ‘British Made Ziff Sterilised’ ‘Falcon Silver Plate Co. Made in England 3533’ household items, history of warrnambool

Railways Collection-Stapled A4 paper Booklet (Commemorating the Centenary of the opening of the railway from Melbourne to Bendigo , 20.10.1962 ) - Australian Railways Historical Society ''100 Years to Bendigo''. The front page has a sketch by Ted Healey of two old trains pulling passenger carriages.There are some black and white photos. The inside cover shows steam Loco with a caption - Down Great Northern Limited express in 1938 Double headed by A2 .972 and A2.883 passing Footscray. (photo : J.L. Buckland ) Page 2 has a photo of a Postcard - 450 Tons of Gold - Pages 10-12 provide information on the Locomotives and carriages that were used. Page 23 has a photo of G Class Light Lines 4-4-0 and V Class Compound 2-8-0 Locos at Bendigo Engine shed in the early 1900's.railways, bendigo to melbourne, 450 tons of gold -

Yields information about the special tram and the people involved at the time of the formation of the BTPS prior to closure of the SEC operated system.Set of three digital images of tram 36 advertising the Lake Tramway Preservation Meeting at the Town Hall 31/5/1971 by Chris Phillips. .1 - tram at Gardens loop with the motorman L Bird pulling the pole down - similar photo to that of The Age Newspaper, see Reg Item 2487. .2 - tram turning from Sturt St into Lydiard St North with the Post Office and the Mining Exchange buildings in the background. .3 - tram at the City stop, south side of Sturt St with the Town Hall and Myers in the background. Also has the tram stop signs in the photograph. See also Reg Item 1064 for the newspaper clipping, 2487 for a print of The Age photograph. See 7033i4 for notes on the tram and who made the banner - thought to be Tom Clark. Imagebtm7033i2bw - black and white version of the slide use in the Long Gallery imagebtm7033i2co - colour hi res scan.trams, tramways, lake wendouree, charters, museum establishment, btps, sturt st, gardens, lydiard st north

Newspaper clipping pasted onto a single sheet of paper with two Punch holes on the left hand side with one hole through the photograph within the cutting. Clipping from The Courier, Ballarat, 24/8/1971, about the first stage of Ballarat's changeover from trams to buses passes uneventfully yesterday with only minor difficulties being reported. Quotes Transport Regulation Boards Regional Office, Mr. A. Stott, a few parking problems with cars in bus bays, demand for timetables. Also has a quote from the director of Davis Bus Lines, about minor problems - passengers asking questions. Has a photograph of the SEC linesman dismantling overhead in Victoria St., as a trail. A gang from Melbourne will come to Ballarat early in September to pull down all the lines. Newspaper cutting published on the Tuesday. 2nd copy added 14/11/2002In red ink in upper right hand corner, "24/8/71" On sheet of paper, various pencil markings - with date Dec. 1963. Possibly paper used by Donor at his job with the former machinery makers, Ronaldson and Tippet.trams, tramways, closure, bus changeover, overhead, dismantling

The collection of thirteen horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Hampden Buggy replicates the vehicle that enjoyed respect from the public from c.1800's. It came in various types.A model of a Hampden buggy, c1900. The body is low to the ground, making it easy for passengers to board and disembark as well as allowing for speed and is lightweight for one horse to pull, making the journey cheaper than using four horses. It has four spoked wheels, two large and two small which have gold painted mudguards. It has brown padded seating, gold painted armrests and two coach lamps. There are two long shafts on each side to surround the biscuit coloured horsel with a white tail and mane, which has the necessary horse tack for carriage use to help the driver communicate with the horse. The original Hampden buggy was the inspiration of K.Booth, an American coach maker. It was designed for the ladies to show off their finery. Keep Bros. and Wood of Melbourne built many variations of buggies for wet or dry conditions.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

The collection of thirteen horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a one horse drawn buggy replicates the vehicle that enjoyed respect from the public from 1833 until 1935. It came in four types.A model of a black enclosed buggy and horse, with two doors and two tinted windows. It is a two wheeled two passenger horse drawn carriage where the driver sits behind on the high seat with silver armrests. The body is low to the ground, making it easy for passengers to board and disembark as well as allowing for speed and is lightweight for one horse to pull, making the journey cheaper than using four horses. It has two black spoked wheels with silver rims, brown seating, silver handles on the doors and two black coach lamps at the back. There is a silver step on the side of the body near the footrest to aid alighting and disembarking.There are two long shafts on each side to surround the horse. It has a model of a brown coloured horse with a white tail and mane, which has the necessary horse tack for carriage use to help the driver communicate with the horse. replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

This Cat No 5880P and the following ten Cat No's to 5890P were part of the original GRINTON PHOTOGRAPHS exhibition in 2008. Each frame follows a story from the 'War to Home' at Tragowel near Kerang, Victoria. The Grinton Collection was a large negative collection found in a tin at Myers Flat and developed from there. Frame 1. 1. Jack Grinton in full marching order. This appears to have been taken after Jack came back from being wounded the 2nd time on 31/9/1918 in the push into the Hindenburgh Line. He was away 3 months with his wounds and rejoined his unit at Visme-au-Val on 11/1/1919, a small village near Abbeville, France. he is wearing his two "Empire Wounded Stripes" on his arm. It is believed he took this photo to show what a fully kitted out digger looked like. 2. Full kit lid out, right down to a tooth brush. It is also believed this was taken to go with the above photo. Note the protective cover on the rifle trigger and magazine area. 3. Mess parade line up. From notes of Jack this could be at "Gamaches", France where the last group of 111 men of the 38th Batt in the 45th quota left to come home. They went from Gamaches to Havre then to England. 4. In "Billets" behind the lines. Note the straw on the floor. When a unit came out of the line they were billeted in farm houses, barns, sheds, homes and at times anything that would give the men shelter from the elements. Refer Cat No. 1280 for Jack GRINTONS Service Records. Photographs - black and white on paper. Four photographs top to bottom, Soldier in uniform, Full kit laid out, Mess parade line up, Billets behind lines. Frame - timber, black colour paint with glass. Mount - black cardboard. Backing cardboard with handwritten notation.On backing cardboard - handwritten in black felt tip pen "1."framed photographs, grinton collection, ww1, 38th

Shillinglaw Cottage looks stable enough now but it was the first colonial building in Australia to be pulled apart brick by brick and reconstructed on a different site. Community outrage prevented the council from demolishing the cottage in 1963 to make way for Eltham’s Shire Offices and local people paid for the cottage to be moved. Originally built by respected local builder George Stebbing in 1859, the cottage is typical of European farmhouses, but is constructed of handmade local bricks in a style known as “Flemish Bond.” The chequered pattern created by the burnt “header” bricks is a unique feature of this style. The cottage’s name comes from its long association with the Shillinglaw family, who loved there for more than eighty years. The Cottage is classified by the National Trust. Tomorrow's history documented todayeltham, jim connor collection, main road, shillinglaw cottage

Colour slides of a demonstration at the Olympic Swimming Pool stadium in 1960. The children are wearing red toy solider costumes and one slide has a sleigh pulled by a reindeer in the routine. More slides from the 1960 demonstration are catalogued separately. Throughout the year Melbourne Legacy provided classes for Junior Legatees such as dancing, gymnastics and eurythmics. The Demonstration was an annual event to showcase their skills. Melbourne Legacy conducted Annual Demonstrations / Parades from 1928 through to 1979. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of different routines in an Annual Demonstration at the Olympic Swimming Pool stadium.Colour slides x 3 of a Demonstration routine with children in red toy soldiers costumes at Olympic Swimming Pool, in a cardboard mount.Handwritten on front 'Demo 1960' in blue pen, one has '8' in blue pen and '15' in pencil.annual demonstration, marching

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome, allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This show harness was used by Mr. Andy Bourke when showing his Clydesdales at shows or demonstrations. Although a more modern example with decorative embellishments, it still has many essential components traditionally found in an everyday working horse harness. The original purpose of the "housen" for example, was to run rain or drizzle off the horse's neck when they had to work in wet conditions - it was laid flat for this purpose on the top of the collar. Nowadays it is purely for show and is often used to advertise a business or stud. Horse brasses and fly terrets were fastened to various parts of a horse's harness. In the early days they probably began as amulets to ward off evil and to bring good luck and continued to be used as a festive decoration. The heyday of horse brasses was between the years 1851 and 1900. Horse brasses are fastened to various parts of the harness with many of their designs being symbolic. The ornamentation on this harness (although not authentic horse brasses) are based on the horse brasses that were popular in the 19th century. This horse harness is a significant example of the equipment that was needed wherever heavy horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with stage coaches, drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used when showing a Clydesdale (or other breed of heavy horse). It is made up of a number of components. 1. Decorative leather cart saddle with two large cloth pads underneath (which have a scalloped leather and stud border), a raised leather pommel and a silver and red coloured metal back strap holder across the top. It has two symmetrical sets of ornamentation (silver hearts and circles) in the front and a wide strap or girth (with a maker's stamp reading "R. Mitchell Saddler") and buckle which attaches the saddle to the horse. 2. Pair of steel hames which are gently curved (to fit on a horse collar) and are topped with steel knobs. They have several steel rings and lugs (to hold straps and chains) and a "Made in England Warranted Steel" stamp. 3. Breeching harness which consists of a number of leather straps, chains and metal rings including a wide padded leather strap with a scalloped edge that sits on the back of the horse and a thick leather strap that goes around the hind quarters of a horse which is joined to the back strap with four shorter vertical straps and buckles. These straps feature silver and red patent leather trim and silver heart shaped ornamentation. The strap also features the maker's stamp of "R. Mitchell". 4. Decorative leather bridle with blinkers featuring the same silver and red patent leather trim on the cheek piece, brow band and throatlatch. It has a stainless steel "Liverpool Driving Bit" with a curb chain, a variety of decorative silver ornaments (rosettes, diamonds plus a heart and two circles) on each end of the forehead band, dropper and strap as well as a silver metal bell (sometimes known as a "fly terret" or "swinger") that sits on the headpiece of the bridle. 5. Leather "violin shaped" dropper (or hanger) with two silver rosette shaped ornaments and a stainless steel clip on the top 6. Stainless steel "Liverpool Driving Bit" with a straight mouthpiece which is ribbed on one side. It has three rein spots (spaces) and a curb chain. 7. Leather arch shaped "Housen" covered in black and red patent leather and decorated with silver studs (some spelling out F H) and bordered with a red fringe. It has a leather strap at the back and two leather loops on the front. 8. Leather padded backband (Australian style "Stallion Draught Roller") decorated with two groups of nine metal "horse brasses" or harness ornaments displaying horseshoe, starburst and horse head designs on blue, red and white striped webbing. The backband has three notched straps at each end, a buckle near the centre and the initial B stamped in two places underneath. 9. Bellyband made of leather and red, white and blue striped webbing. It has a set of three buckles at each end (which correspond with the notched straps of the backband). 10. Wide, thick leather strap which has a buckle and notches at each end. It also has the maker's stamp of "R. Mitchell Saddler". 11.One pair of long leather traces - each with a buckle and notched loop at one end, decorated with a small silver diamond shaped harness ornament. 12. Length of stainless steel heavy duty chain with two swivel connectors.Saddle - "R.MITCHELL / SADDLER" Hames - "MADE IN ENGLAND / WARRANTED / STEEL" "MADE IN ENGLAND / WARRANTED / unclear" Breeching Straps - "R. MITCHELL / MAKER / R. MITCHELL MAKER" Housen - "F H" Backband "B / B' Wide leather strap - "R. MITCHELL / SADDLER"flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, harness, horse harness, show harness, clydesdale horses, andy bourke, horse drawn cart, housen, bridle, hames, breeching straps, dropper, bit, liverpool bit, backband, harness ornamentation, bellyband, back saddle, fly terret

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

Belaying pins can be metal but are often made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying pin, metal, painted brown.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship

Belaying pins can be metal but are also made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying Pin, metal, painted white.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship