This device was used to measure surface wind speed and direction. This anemometer was located on a concrete pad outside room 2.15 on a steel pole. The pole was considered unsafe and the anemometer was relocated to it's current position. When lowering the pole it fell over and was badly damaged. The Bureau of Meteorology donated it to the museum. It was then repaired and restored. The central pole on which it is mounted is galvanised iron pipe painted black. The anemometer, a portable device that manually measures wind speed, was a necessary instrument once common to all weather stations. The arms are attached to a vertical rod and as the wind blows, the cups rotate, making the rod spin. The stronger the wind blows, the faster the rod spins. The anemometer counts the number of rotations, or turns, which is used to calculate wind speed, surface wind and direction. They were designed to be durable to withstand the corrosive environment and strong winds expected at coastal sites such as those at Gabo Island. Anemometers existed in the nineteenth century and their design was improved by various experts including John Robinson in 1846, John Patterson in 1926, Brevoort and Joiner in 1935 and Derek Watson in 1991 who added wind direction measurement to its functions. This example was made for the Bureau of Meteorology by the Melbourne instrument company, Synchrotac, which became registered and incorporated on 26 July 1966. It is now displayed inside the building. A good example of its kind, the anemometer has first level contributory significance for its historic value and provenance to the lightstation.Anemometer and tripod stand. Three cupped brass discs on rotating arms fixed to turned brass cylinder shaped shaft. Beneath discs is a lead directional wind arrow attached to a rotating arm. A wooden three legged stand with central supporting pole of black painted hardwood and attached to a white painted marine ply circular base.Under wind cups: " SYNCHROTAC / MELB. / ser.no.70/372 / MADE IN AUSTRALIA." Above wind direction arrow: "C.OF.APT..../ SYNCHROTAC / MELB ? MADE IN AUSTRALIA / ser.no.70/372"

The Excelsior IV Log is a nautical instrument for measuring a vessel’s speed and distance travelled. When navigating a ship it is essential to be able to estimate the boat’s speed and distance travelled to determine its position at sea. In times past the only way to measure a ship’s speed was to throw a wood log into the water and observe how fast it moved away from the ship. In the 16th century, the log was fastened to a rope knotted at set intervals. The log was thrown over the stern (back) of the vessel and a crew member counted the number of knots that were paid out in a set time. From this, they could estimate the speed of the vessel through the water. This was known as streaming the log and is also the derivation of the knot as a measurement of nautical speed. The Walker’s Excelsior Mark IV instrument was designed for smaller vessels, such as yachts, launches and fishing vessels. Historical: Thomas Walker & Son was internationally renowned in the manufacturing of ships logs, founding father , Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ship’s log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean), being the most common log in use for two generations. It took until 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. The ship log was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades.Ship's Taff Rail Log, rope attached. Walker's Excelsior IV Log model. Nautical miles dials: units and 10's. "Walker's Excelsior IV Log", "Made in England by Thomas Walker, Birmingham"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, log register, taff rail log, taffrail log, marine navigation, a1 harpoon log, cherub’ log, walker’s excelsior mark iv log, ship’s log instrument, mechanical ship’s log, measure ship’s speed, nautical instrument, navigation instrument, massey & sons, thomas walker, blue brick walker, thomas walker & son, thomas ferdinand walker, 48 hour work week

The Strand Musical Magazine, Volume IV, July to December 1896. The inside front cover has a certificate outlining it was presented to Blanche Hoskins, at Gravel Hill State School No.1566, for School Choir: First Prize, Astral Competitions, Bendigo May 1897. The book has a grey hardcover with black, red, blue inscriptions and pictures on the cover. The spine has gold and black inscriptions and pictures, and the back cover is blank. There is a stamp on the title page - "E. W. Cole, Music Department & Library, Book Arcade". The book includes pictures and articles on musical instruments, composers, musicians and sheet music for various pieces.sheet music, music, gravel hill school, books

Bisque porcelain figurine of a male doctor holding a medical instrument. The doctor has grey hair and is in surgical attire, with white gown, gloves, surgical hat and mask. The cuffs of his brown trousers, and his black shoes, are visible below the gown. The doctor is wearing glasses on the end of his nose, and holds a surgical tool in his right hand. The figurine is standing on a base with a painted green stripe across the centre, and is supported by a pillar at the back which is decorated with decorative orange and black squiggly lines. Orange and black squiggly lines also feature on the front of the base. Handwritten lettering on a sticker on underside of base reads 'FF'.

J. Austen chrome plated tongue depressor blade only. Size 2 1/4, stainless steel material. The top arm of the instrument has a serrated grip below to facilitate tongue adherence, also has a middle space canal with semi circular welded rings to possibly introduce or attach an anaesthetic tube. This piece has in its internal lateral side engraved the possible owner's initial and last name. Minor scratches and dust marks are present over the piece as well as oxidation spots around engraved name. Weld spots in metallic semi circles edges on top of the piece.Engraved at the internal side of the handle, V. BRAND Stamped at the external side of the handle, J.AUSTEN / 2 1/4 / STAINLESStongue depressor, medical instruments, airway instruments, j. austen

Negatives No. N334 and 335 and black and white prints made by a laser printer (stored in folder ) of fitters, overhead crews lining up the overhead at the Russell St. crossover in Bourke St. Has W6 988 in the photo, along with tower wagons 2 and 8. 1606.2 shows device laid between rails that allows the location of the overhead to be checked, relative the to the centre line of the track. Photo taken 19/6/1955. Dave Macartney 12/1/2001 identified Doug Lees in black coat and hat looking at instrument. Doug was an Engineer with the MMTB. Negative scanned hi res and imaged updated 22/5/2020.trams, tramways, melbourne, bourke st, russell st., testing overhead, commissioning, tram w6 988

Green covered history of dances, The Dance Program, Musical Forms and Dance Examples and Celtic Music Forms. Dance Programs include the Eighteenth Century, the Nineteenth Century, the Twentieth Century, the 50/50 Dance, the Old Time Dance the New Vogue Dance, Decline of the Set Dance, the Contemporary Program and Old Time and New Vogue and musical time signatures. Collected by Peter N Ellis and dated 23 June 1992. On the front are sketches of two emus playing musical instruments and a koala and a wombat dancing. The name Bush Dance & Music Club of Bendigo Inc. is printed on a banner below the illustration.clubs, music, bush dance & music club of bendigo, peter ellis collection, bush dance & music club of bendigo, john williams, peter n ellis, michael treacy

Title Vol. 2567 Fol. 294 in the name of The Greensborough Estate Company Limited, 164 acres four and a half perches, being part of Crown Portion 17 Parish of Keelbundora, County of Bourke. Dated 22nd May 1895. Northern boundary Greensborough Road (now Grimshaw Street), Southern boundary Nell Street, Eastern boundary Plenty River, Western boundary road (now named McDowell Street); Title Vol. 3134 Fol. 605 in the name of Adolphe Frederic Seelenmeyer, land as described above, LP 4759 and transfers and other instruments to 9 March 1948Folder containing two Certificates of Title (3p. + 9 p.) and twenty pages of miscellaneous documents, including historical summary, brief biography of A. F. Seelenmeyer, two Death Certificates and photocopied extracts from probate documents, as listed in table of contents, ed. by Peter Simmenauergreensborough, greensborough estate company limited, grimshaw street greensborough, plenty river, nell street greensborough, mcdowell street greensborough, adolphe frederic seeley, formerly seelenmeyer, adolfe frederic seelenmeyer

This general purpose Multi-meter was manufactured after 1950 and used by the SEC Vic (Kiewa Hydro Electricity Scheme) from that date until late 1900's. It was used to measure very small voltages associated with the operation of the various Hydro Generators. The readings were able to be shown by the resistor in use in the current circuit. During this time period, high quality testing instruments were either sourced from Europe or England. This particular meter was manufactured in the Netherlands. This type of "old" analogue meter was replaced by digital meters whose electronic components are a fraction of the size of the older analogue ones.This analog General Purpose multi-meter is quite a large (for handheld mobile) apparatus which permits the easy monitoring of electrical variations within the large SEC Victoria Hydro Scheme's electrical generators. These generators are powered by the hydro force of "stored" water at a higher altitude. The establishment of both the NSW and Victorian Hydro schemes was achieved from the mid 1900's to the 1960's. At this point in time the need for additional power sources to quench both an industrial and domestic demand for electricity was purely an economic and not and environmental (carbon reduction) factor. This hydro scheme was instigated by "the Government of the day" as a bold move and was the major force of the World War II refugee and "technical" workforce inclusion of skilled and unskilled migration into the Australian environment. Although this mass "invasion" of workers with families was thought of in some circles as intrusive, the expansion of population post war years and its integration into the Australian rural sector, produced the multi- lingual multi-cultural diversity of later years.This General Purpose Multimeter is an analogue meter i.e. it has a needle arm that moves across a scale of divisions. This is a large(hand held) device due to the mechanical movement system within and the large size of its electronic components of its circuitry.There are two black bake-lite push buttons operating the wire inserts Positive/negative leads at the top. The meter (protected with a glass window) has clearly marked graduations (top - volts, bottom amperes). Below this are two bake-lite dials (left "potentiometer the right one measuring range selector). Below this is a "dial" switch to input the desired resistance measuring range "V" Front "H&B ELIMA" and to the right Elavi 15n. 0n the front side is a label "STATE ELECTRICITY COMMISSION OF VICTORIA TRANSMISSION DEPT E.C.No." On the bottom of the base is a stenciled layout of the battery "layout" including the fuse . The information notice is presented in five languages starting with German, English,French, Italian, Spanish and Dutchsec vic kiewa hydro scheme, alternate energy supplies, alpine population growth

A penknife, or pen knife, is a small folding knife. It was originally used to describe a knife used for cutting or sharpening a quill to make a dip pen nib. Originally, penknives were used for thinning and pointing quills to prepare them for use as writing instruments and, later, for repairing or re-pointing the quills. They did not necessarily have folding blades, but resembled a scalpel or wood knife by having a short, fixed blade at the end of a long handle. Today a penknife can have single or multiple blades, and with additional tools incorporated into the design. The most famous example of a multi-function penknife is the Swiss Army knife A folding pen-knife with 2 stainless steel bladeson long blade end; STAINLESS / MADE IN / SHEFFIELDpen-knife, scouts, cheltenham, moorabbin, bentleigh, tools, early settlers

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Pessary, Thomas style, made of black vulcanite. Inscribed with number "60". intrauterine device, pessary

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape. Size small.pessary, intrauterine device

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape, and in the "eyeglass" stem style.pessary, intrauterine device

Used in recorder/accordion recorder band consisting of internees from Camp 3 Tatura in WW2recorder specially made in key of F for Camp 3 recorder/accordion band. The bands on stem of recorder are made from copper pennies. Not currently playablerecorder, musical band, camp 3, internees, wagner, lilo, tatura, thaler, l, !, musical, instruments, wind, handcrafts, woodcarving

The Joly meldometer was created to determine the melting point of minerals. W.E. Wilson, an astronomer and author, stated in 1900 that the Joly meldometer consisted of a ‘a strip of platinum on which minute fragments of any mineral can be placed, while any alteration in its length can be determined by means of a micrometer screw which touches a lever connected with one end of the strip. The strip can be heated by an electric current, and is calibrated by observing the micrometer readings corresponding to the temperatures at which some substances of known melting-points melt’i . One reason why the Joly meldometer was seen as a successful addition to science was the small amount of any substance that it required for testing. Only a minute sample was needed for the instrument to work and so a tiny part could be taken from a delicate item without destroying itii . The instrument was originally manufactured by the Irish company Yeates & Son of Dublin. The Yeates family business was established in the early 1790’s and is thought to have operated until approximately 1922iii . Their business slogan was recorded as ‘Instrument makers to the University’, a slogan which proudly exhibited their relationship with Trinity College, Dublin. The company was located directly opposite Trinity College, the place where the Joly meldometer was created. Working in such close proximity must have assisted this business relationship. The inventor of this meldometer was Irishman John Joly. Joly was born in 1857 at the Church of Ireland Rectory, Hollywood House. His education led him to Trinity College Dublin where, by 1891, he had obtained a Bachelor of Engineering degree as well as a Doctorate of Science. The entirety of his working life appears to have taken place at Trinity College although he is known to have travelled in order to consult with other scientists such as the world renowned Sir Ernest Rutherford. The Joly meldometer was used for a variety of different purposes, with scientists often adapting the instrument to suit their own needs. For instance, the previously mentioned astronomer W.E. Wilson adapted the meldometer to assist him in measuring the radiation of the suniv . Joly used his device in an attempt to ascertain the age of the earth. In 1913, along with Sir Rutherford, Joly came to the conclusion that the earth was approximately 400 million years old. They did this by analysing the decay of radioactivity in minerals. According to our present knowledge of the earth this was a much more accurate date than the dates Joly had previously derived. He had first thought that the earth was 97 million years old due to the volume of sodium in the oceans. Joly’s second analysis of the topic had resulted in the age of 80 million years. This figure was based on the accumulation of sediment. Apart from designing his meldometer, Joly is also remembered for his work with colour photography. In 1894 Joly discovered a method for creating colour photographs from a single platev . He also studied the use of radiation as a treatment for cancer and persuaded the Royal Dublin Society to establish the Radium Institute to assist hospitals. In 1933 Joly passed away at the age of seventy-six.

The front and rear of the body had minor restyling, with new front grille, headlights and taillights. The interior has been significantly upgraded. Interior upgrade includes a new instrument panel, centre console and steering wheel and new design transmission lever and handbrake.[2] There is also a new mobile phone power outlet under the centre console. The new instrument cluster features a large multi-function digital display (single or triple-window, depending on model), which displays information such as radio station display, PRND321 gear selected indicator, trip computer with stopwatch function, service reminders and a help facility. Standard features (on some models) now include "twilight sentinel" - automatic headlamp control, programmable headlamps off time delay, high feature Blaupunkt audio systems, road-speed sensitive intermittent wipers and passenger airbags. The VY Series II update added cruise control, front power windows variable front seat lumbar support, and revised interior trims. A 245 kW (329 hp) V8 was introduced to sports variants and a sportier repositioning of the Calais model. This repositioning included a subtle body kit, the option of a 235 kW V8 in place of the previous 225 kW (302 hp) and a firmer suspension tune (known as FE 1.5) that was not as stiff as the FE2 suspension on sports variants. Released in September 2002 and produced until August 2004 (with a Series II released in August 2003), the VY series was the first major design departure (both inside and out) of the third generation Commodore range released in August 1997. It launched at the same time as the Ford Falcon (BA).VY Holden 4 door sedan white paint with grey fabric upholsteryLion and stone emblem grille centre, V6 badge on mudguards, Commodore badge on boot LHS, Lion and stone badge on boot centre, Acclaim badge RHS of boot lidvehicle, commodore, car

This business card advertised the business of Charles Hider who had a stationery and book shop in Liebig Street from the 1860s to the 1880s. (63 Liebig Street today). He also sold photographs and pictures, picture frames, pianos and other musical instruments and homeopathic medicines and was an agent for local newspapers and overseas magazines. The stamp on one side of the card shows Liebig Street spelled ‘Liebeg’, suggesting that the stamp was perhaps made in the 1860s when ‘Liebeg’ was the common spelling of the street name. Charles Hider’s brother James also had a book and stationery store in Warrnambool in Timor Street in the 19th century. This card is of considerable interest as it belonged to Charles Hider, a prominent businessman in Warrnambool in the 19th century. It also shows the type of business card used in the 19th century.This is a small business card from Charles Hider, a 19th century Warrnambool bookseller and stationer. It is buff-coloured on one side with a stamp of Charles Hider on a white background and a sketch of a sprig of daisies with foliage. The flowers are coloured red, white and green. On the other side is information on the items sold in Hider’s shop and other services offered. The information is printed in black on a buff-coloured background. ‘Chas. Hider, Liebeg (sic) Street, Warrnambool’charles hider, warrnambool

The sculptural installation was a gift from the Portuguese government and presented to Warrnambool City Council. The sculptor, Jose Nuncio, completed the work in 1999, and it was inaugurated at Warrnambool in 2001. Prince Henry the Navigator founded a school of navigation in Sagres, Portugal. This led to navigation techniques that made the 15th century voyages of discovery possible. The vision of Prince Henry brought together ship builders, cartographers, instrument makers and mathematicians. Vasco de Gama rounded the southern tip of Africa and sailed across the Indian Ocean to India in 1496. This started a new era of trade and exploration, expanding the boundaries of the known world, and linking the east with west.Six colour photographs of a sculptural installation at Warrnambool. Busts of Vasco De Gama and Prince Henry the Navigator feature in the installation. Images also include two informative plaques containing information on De Gama and the Prince.warrnambool, exploration, navigator, de gama, prince henry the navigator, portugal, portuguese, david atkinson, john pandazopoulos

Until suction became available in the 1930s, maintenance of a clear airway during oral and nasal surgery relied on posturing of the patient, mopping with sponges or the temporary placement of swabs or throat guards. Removal of surgical debris such as polyps, blood clots or foreign bodies could only be effected by the finger or devices such as probangs. The Probang is inserted blind (perhaps guided by a finger), the main shaft can then be held in the left hand whilst the right hand withdraws the inner tube. This results in a fanning out of the linear strands which are visible proximal to the tip. Held in this position the instrument is withdrawn and is supposed to scoop out the offending mass. Long flexible metal rod covered in gum resin sheath with a ring grip at the proximal end and a smooth metal rounded edge tip for insertion into the airway for clearing of obstructive matter.Stamped onto gum resin sheath: MADE FOR / CARL ZOELLER BRISBANE / GERMANY Stamped onto gum resin sheath in gold leaf: [indecipherable - presumably manufacturer's label]probang, flexible, oral, airway, horsehair, anaesthesia, obstruction, dr sharkey, lidcombe state hospital

New instruments were created using as archetype Physick´s tonsilotome model. Fahnestock, in the United States, 1832, Mackenzie in London, 1880, Brunings in 1908 and Sluder in 1911 in the United "States developed similar equipment. Greenfield Sluder, an ENT doctor, in Saint Louis was not the first to use the guillotine-cutter for tonsillectomy, but he published a study, in 1912, in which he affirmed to have reached 99.6% of success in his surgeries through this technique (1,2). They all aimed to accomplish surgery as fast as they could, especially in children, for the account of the lack of anesthetic techniques." Retrieved from URL: http://www.internationalarchivesent.org/additional/acervo_eng.asp?id=395 Sluder's Tonsil Guillotine large size. This metal piece of tonsillectomy equipment was designed by Greenfield Sluder in 1911. The piece has generalised oxidation spots on its surface but mostly founded over the top retractile arm blade holder and handle, also has sulphated areas at the base of the handle surface with a bluish colouration. This piece has a screw attached on top of the arm as part of the adjustable blade retractile system.sluder, greenfield, tonsil, guillotine, tonsillectomy

Formerly of Station Works, Wakering Road, Barking, Essex, Henry Browne & Son were important British compass makers. The company was founded in the nineteenth century in Barking and London. They were respected English instrument makers who made fine quality compasses, ships clocks, inclinometers, sextants and chandlery items for over 140 years. Their "Dead Beat" compass, which was well dampened to reduce oscillation, was fitted to many Allied ships during the Second World War. Sestrel was their famous Trade Mark brand. The company was sold to John Lilley & Gillie Ltd and SIRS Navigation, both UK companies, in 1993. Example of a hand held compass used in WWIIA Sestrel hand held bearing compass with wooden handle in own glass fronted, wooden container.Sestrel Henry Browne & Son Ltd Barking Londoncompass, navigation

This item was used before the flexible sigmoidoscope (1996) and before the introduction of fibre optics late 1900s. The 1900s saw an incredible leap forward in the field of medical procedures. The ability to visually see what was happening within the human body (in real time) provided greater analysis about certain biological abnormalities during a greater time elapse than before. This procedure involved less trauma to the patient and greater flexibility to the Physician in treatment schemes. The rigid signoidscope, however provided the first visual of the colon in situ, but was highly invasive to the patient.This item was used in the Mount Beauty Hospital for qualified Physicians to use in their diagnostic evaluation of patients. This would not be an instrument used by a General Physician. This item is still a internal observatory method which may, in some instances, cause some minor complications. This item does point to the level of medical diagnostics, equivalent to those available in larger towns and cities, which brings this rural area (once considered to be an isolated region) to a higher level of medical care.This rigid 35 cm long sigmoidoscope (internal probe) is made of stainless steel outer hollowed rounded rod, which permits the use of both a fixed (very thin) lighting rod and two flexible cord lights access. Both the lighting rod and the flexible lights can be lowered within the main rod to allow the physician to see the colon at the bottom of the rod.These items are all contained within a specifically inlaid wooden box. The box has separate open compartments for the main instruments and a small lidded compartment containing replacement light bulbs. The hollowed tube permits the physician to visually observe the signoid (an S shaped part) of the colon.On the stainless steel main rod body are engraved the lengths of the body,in centimetres ,with numbers starting at the five centimeter mark and then every five centimetres up to the thirty centimetre mark. On the front inside rim of the box are two inlaid white plastic strips with black print, "ALLEN & HANBURYS Ltd" and the other "LONDON"medical diagnostics, sigmoidoscope examinations, medical examinations, hospital equipment

Sepia photograph of brass band, (mounted on cream board with printed red border). Band on oval (paddock) with scattered trees and fence in background. Twenty adult males, two boys in group. Six kneeling, seven seated and remainder standing with various instruments with drum inscribed BBB 1896. Inscriptions: on front - 'GP37'. Back - J ? Oswald, 53 Peg Leg Road, Eaglehawk. On back, rubber stamp 'Royal Historical Society of Victoria, Bendigo Branch'. History: (HJG Biggs) Borough Brass Band 1896, Eaglehawk. Eaglehawk Borough Brass Band in 1896 with its preponderance of Cornish members (BHS Inc). Previous Acc. No. GP 37.person, group, band

Two black and white photos pasted onto a sheet of paper. The top photo is a photo of three men, one playing a fiddle, one with a brass instrument and the third is not very clear. They are in front of a hut with branches on the roof and hessian walls. Beneath the photo is typed on a piece of paper - A Bendigo Camp by Mulgarrie W. A. (Boer War Training Camp? Bendigonian Jan. 14 1897. Latrobe Collection, State Library of Victoria. The second photo is three men, dressed in suits and sitting on chairs in front of a building. One has a clarinet, the middle one has a concertina and the other has a fiddle. The men are the Coleman Brothers. The photo was taken by a travelling photographer called Siebart.photo, group, male, peter ellis collection, mulgarrie w a, boer was training camp?, bendigonian 14/1/1897, latrobe collection, state library of victoria, bill coleman, charles coleman, john robertson, singabout vol 6 no 1 1966, siebart, peter cuffley

Two black and white photo of bands. One is a pipe band. There are six men and two boys in the photo. They are dressed in kilts. The men have long feathers in their berets. Some are holding bagpipes. The other photo is a brass band with twenty two players and their leader. They have various brass wind instruments and two drums. The bass drum has a three tone shield painted on the end with the name: Tanumda Brass Band. All their jackets are high buttoning with large embroidered decoration down each side of the front. The bass drum player has no embroidery on the front of his jacket. He is wearing the drum harness and holding a padded drum stick.photo, group, musicians, peter ellis collection, pipe band, tanumda brass band

Compass, divider, and caliper are basically instruments that have two legs pivoted to each other at the top and are concerned with small-distance measurement or transfer. The compass and divider have straight legs; the caliper has curved legs. Dividers and Calipers were known to both the Greeks and Romans, though the caliper was uncommon. A divider with a circular sector, or wing, connecting the two legs was sketched in 1245, its modern counterpart is the wing divider with a thumbscrew clamp and screw for fine adjustment. Or the marine dividers used to measure the distance a vessel has travelled by transferring the vessels distance from a map with the divider and transferring that measurement to a marine ruler to mathematical calculate the distance.Item is believed to be a replica/ copy of a 19th century map calipers used in marine navigation to determine distance travelled. Item was probably purchased between 1972-1975 to add to the marine displays at Flagstaff Hill.Stainless steel dividers used in navigation charts. Top half is alloy plated. "W & HC" and "Made in England".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, stainless steel dividers, steel dividers, dividers

Stem pessaries were instruments used for rectifying uterine displacement, either ante or retroversion. The pessary consisted of a stem and bulb or ball. The stem was introduced into the vagina, and the bulb rested against the cervix/uteri. An external wire frame could be attached to the bulb. The wire frame would be positioned to press on the pubis, thus keeping the pessary in position in utero. Although this pessary has been recorded as Peaslee's it is very similar in appearance to Thomas's galvanic stem pessaries. Stem pessaries were used in rectifying uterine displacement, either acute or retroversion. A pink tag was attached by string to one of the stems inscribed "Peaslee's/ Uterine/ Stem " "...?TID" on other side.Two Peaslee's intrauterine stem pessaries. Copper single stem pessaries with rounded top, stamped with the number seven on the top.intrauterine device, pessary

The '24' inscribed on the handle is a theatre number for instrument identification. Invented by British obstetrician Robert Barnes (1817-1907), these forceps were designed to "enable delivery from the superior strait and from above the brim in cephalo-pelvic disproportion." One of Barnes' aims with this design "was to reduce the incidence of craniotomy, because the Caesarean operation was at this time a desperate last resort." (Source: Forster, F M C. (1971), Robert Barnes and His Obstetric Forceps. Australian and New Zealand Journal of Obstetrics and Gynaecology, 11: 139-147.) With the addition of William Neville's axis-traction handle (invented in 1886), a variation of these forceps known as the Neville-Barnes forceps gained widespread popularity.Set of metal forceps, consisting of two nickel plated blades with bakelite handles. Inscribed 'EVANS & CO./LONDON'.Theatre mark "24" inscribed on handle of both blades.obstetric delivery