Showing 15120 items matching " objects"
-
Bendigo Historical Society Inc.
Functional object - Western Electric 4205E Vacuum Tube
Western Electric 4205E tennis ball with nipple on top, vacuum tube. Base Europe 4-Pin B4. filament: Vf 4.5 volts/lf 1.6 Ampere. western electric, radio valve, 4205e -
Bendigo Historical Society Inc.
Functional object - Western Electric 242C Vacuum tube
Western Electric 242C vacuum cylindrical tube. four plugs in the basewestern electric, 242c, vacuum tube -
Bendigo Historical Society Inc.
Decorative object - Two small tables
Two small identical wooden tables that are 17 centimetres high, 34 centimetres long and 21 centimetres wide. One is painted green, the other has a clear timber finish. The legs are two and a half centimetre square at the top tapering to one and a half centimetre. Pieces of wood one centimetre by three centimetres secure the legs to the underside of the table. A one centimetre by a half centimetre wooden bead is attached to the underside of the table between the legs and the edge of the table. woodwork, small table -
Bendigo Historical Society Inc.
Decorative object - Display Pedestal
A wooden construction of three pieces. The lower piece is eleven centimetres square and two centimetres high, there's a one centimetre right angle edge then angled two centimetre long and rising one centimetre section, then there's half centimetre high and seven centimetre square flat section. The middle piece nineteen centimetres high and four centimetres square at the bottom tapering to three centimetres square at the top, each side has two eleven centimetre groves in it that start and finish four centimetres from each end. The upper piece is a smaller inverted copy of the lower piece, it has four centimetre square attached to the middle piece and an eight centimetre flat square on top. It has a clear coating applied to it which is deteriorating. woodwork, small display pedestal -
Bendigo Historical Society Inc.
Domestic object - Butter Churn
"Cherry and Sons Pty Ltd", dates this churn to post 1904. In 1858, Edward Cherry began making butter churns in his spare time. Thisi became a full time business with the first factory opening in Gisborne in 1875, using imported NZ kauri pine. Steam was used to bend the base and then it was 12 months drying time before the churn was available for sale. Edward died in 1909 and the business was taken over by his son George until his death in 1917. During the polio epidemic in the 1930's, the company also made respirators. The company closed iin the 1970's.A wooden butter churn with handle and lid. the handle turns a spoked wooden paddle inside to make butter. It is a light brown colour, 30 centimetres high, 32 centimetres long and 21 centimetres wide. The wooden handle on the outside of the box is nine centimetres long three and a half centimetres wide tapering to one and a half centimetres wide, it's attached to a piece of metal that's 13 centimetres long, one and a half centimetres wide and half a centimetre thick. This is attached to a metal rod one centimetre in diameter that goes through the box and is attached to the other side of the box. A wooden frame 24 centimetres by 18 centimetres with two one centimetre wide pieces inside it is attached to the rod.CHERRY & SONS PTY. LTD. GISBORNE VICTORIA T1 Directions for use butter churn, cherry and sons pty ltd -
Bendigo Historical Society Inc.
Functional object - Amalgam bucket
Ore bearing rock brought out of the mine was crushed at the battery by heavy metal stampers and the fine material passed over copper pates coated with mercury. Gold particles would combine with the mercury forming an amalgam which was then scrapped off the copper plates and put into the amalgam bucket ready for retorting too extract the gold. The amalgam of mercury and gold was placed into the retort which was heated to evaporate the mercury. The mercury cooled as it ran down the pipe which was recovered to be reused leaving the gold behind. The gold would later be put into a crucible and heated to burn of impurities and the molten pure gold poured into an ingot.A heavy cast iron bucket 20 centimetres high, 16 centimetres in diameter at its base and 22 centimetres diameter at the top. It has a spout five centimetres wide protruding two centimetres. There is a handle which is a semi- circular shape 19 centimetre wide extending 14 centimetres above the bucket The inside of the bucket has an enamel coating. amalgam bucket, bendigo gold, gold retort -
Bendigo Historical Society Inc.
Functional object - Sign
A rectangular metal sign painted dark blue with white writing and a white line around the edge which has a quarter circle indentation on each corner. The writing is all in capital letters and states DO NOT SPIT ON FOOTPATHS PENALTY £5. the reverse of the sign is identical. The sign is 30.5 centimetres long and 15.5 centimetres wide. It has a four centimetre by 15,5 centimetre piece at right angles on the end which has three holes in it for mounting. signs, public health -
Bendigo Historical Society Inc.
Functional object - Cast Iron Dolly Pot
Cast iron dolly pots were used in the mining industry to crush ore specimens and samples into dust before panning. The principle is the same as a mortar and pestle.This item has two pieces both are made from cast iron and are rusted and a dark brown color. One is a tapering cylinder 16.5 centimetres wide a its top, the first two and a half centimetres down tapper to 13.5 diameter, the next nine centimetres tapper to 11 centimetres diameter. the last two and a half centimetres is a solid base that flares out to a 16.5 centimetre diameter, the inside of the bottom of the cylinder is a bowl shape. The other piece is a solid tapering shape, it's four and a half centimetres in diameter at one end which tappers to three centimetres in four centimetres of length, the next sixteen centimetres tapper to two centimetre diameter. There is a knob on top, one and a half centimetre high and two and a half centimetres wide.mortar and pestle, dolly pot, gold minning -
Bendigo Historical Society Inc.
Domestic object - Water Driven Mixer
The Hydro mixer was attached to the kitchen tap which drove the mixing paddles.Mostly made of cast iron covered with green enamel. Its base is a 20 centimetre diameter and two centimetres high and shaped to hold a bowl, there is a protrusion eight centimetres long, four centimetres wide and nine centimetres high. A hinged section is attached to the protrusion of the base, it's a curved oval shape that's four centimetres by three centimetres at its base and tappers to four centimetres by two centimetres at the top, it then widens to an eleven centimetre diameter and three centimetres high shape that is parallel to the base, the centre of it is above the centre of the base. There is a removable eleven centimetre diameter plate screwed to the top. A two centimetre diameter 60 centimetre long plastic hose with a brass fitting on the end that is flared to four centimetres is attached to the side of the circular top. A one centimetre diameter metal tube is attached underneath that has two beaters on the end of it.HYDRO MIXER PAT APP FORfood preparation, hydro mixer -
Bendigo Historical Society Inc.
Domestic object - Cast Iron Kettle with non-matching lid
This kettle was made in the 1880s.Cast iron kettle 16 centimetres diameter at its base and 18 centimeters diameter at its widest point 11 centimeters above the base, it then curves up another three centimetres where there is a ten centimetre diameter hole. A non-matching metal lid with a one and a half centimetre knob covers the hole. Three centimetres from the base of the kettle there is a two and a half centimetre diameter spout which tappers to one and a half centimetres, it's 14 centimetres long and has two bends. A handle is attached to the top of the kettle, it is two centimetres wide, it extends two centimetres straight up at both ends that are 12 centimetres apart then forms an open oval 20 centimetres wide and nine centimetres high, it's one and a half centimetres thick for 11 centimetres at the top and has groves for fingers on the under edge.K23.1kettle, cast iron -
Bendigo Historical Society Inc.
Domestic object - Wash Tub
Before hot and cold water was easily available children were bathed in small tubs. An oval metal wash tub. The base has a four centmetres metal band around it that extends two and a half centimetres below the bottom of the tub. The bottom of the tub is an oval 50 centimetres long and 40 centimeters wide. The wall is 29 centimetres high with rolled rim half a centimetre wide on the top, it's made in two pieces that are folded together at each end. The top of the tub is an oval 62 centimetres long and 49 centimetres wide. There are identical metal handles at the top of the tub at each end, they are made of a one centimetre diameter metal rode, they have a nine centimetres long grip, a four centimetre piece at right angles on each end and a two centimetre long piece at the opposite right angle on the end which is inserted into a two centimetre loop that's attached to the tub. wash tub, personal hygiene -
Bendigo Historical Society Inc.
Functional object - Baby Scales
These scales were possibly used at Charing Cross Infant Welfare Centre, Bendigo. A mechanical balance scale. An oval cane basket 60 centimetres long, 38 centimetres wide and 13 centimetres deep sits on top of the scales. Two metal bars two centimetre wide and half a centimetre thick, underneath the basket hold it on the scales balance mechanism. On the other side of the balance mechanism is a 20 centimetre by 12 centimetre and one centimetre thick metal plate on which the known weights are placed. The base of the scales is a moulded metal consisting of two half domes 14 centimetres diameter and six centimetres high joined together by a ten centimetre long, four centimetre wide and six centimetre high section.4LB 14OZ 3JI CIII C2320baby scales, charing cross infant welfare -
Bendigo Historical Society Inc.
Functional object - Infant Welfare Centre Table
The table was used in the Charing Cross Infant Welfare Centre. The Maternal and Child Health Service (Infant Welfare) began in Victoria in 1917 when, in response to high levels of infant morbidity and mortality, the first voluntary Infant Welfare Centres began to emerge. The first centres were established in Richmond and Carlton and received a Council subsidy.A table with an open box fixed to the top it 100 centimetres long 55 centimetres wide with 14 centimetre sides. The table was used to measure the length of babies to record growth. One end is shaped the fit a baby's head when it is lying on the table, the other end slides to the baby's feet. There is a 90 centimetre measuring tape fixed on to the table top.charing cross infant welfare, infant measuring table -
Bendigo Historical Society Inc.
Ceremonial object - Ceremonial apron
The Grand Order of Oddfellows was a friendly Society founded in Manchester in 1798. It began in Australia in 1844 with the first Victorian branch established in 1854. The first mention of the Eaglehawk group was in 1868.Small ceremonial apron for the "Grand United order of Odd Fellows" on white/cream silk cotton sateen with blue tape border. Centre to screen print main panel has large printed crest showing quartered shield (top left) hour glass (top right) crossed keys (bottom right) dove with olive branch (bottom left) Noah's Ark. In centre of shield is a right hand palm forward with heart symbol. Supporters to shield, woman left holding sword and scales next to seated lion, woman on right holding mirror and flaming torch next to seated sheep. In centre above the shield is a seated women with four children, one at breast. Banner at base of women and shield reads "Amicitia Amor et Veritas". Long tapes top left and top right corners. At base of print are two hands joined in a handshake in a panel surrounded by flowers.In pen and ink on back "George Braysher"?grand united order of odd fellows, ceremonial apron -
Bendigo Historical Society Inc.
Ceremonial object - Ceremonial collar
Ancient Order of Druids was formed in London in 1871. Their motto was "Justice, Philanthropy and Brotherly Love". The Order was established in Australia in 1851.The Sandhurst Lodge 247 met at Queens Head Hotel (Lockwood cross roads) and was first mentioned in the Bendigo Advertiser in 1863.Ceremonial collar in red velvet with gold metallic bullion fringe around outside edge and lower inside edge and gold metallic lace to edge. At one end (LHS) there is a large gold metallic star in sequins and gold metallic bullion. At the other end (RHS) the initials PA are worked in zardozi work in gold metallic thread 5cmx7cm.ceremonial collar, ancient order of druids -
Bendigo Historical Society Inc.
Ceremonial object - Ceremonial collar
Ceremonial purple velvet collar with gold metallic bullion fringe to outside edge and gold metallic ribbon and ribbon lace to all edges. At each end is a five point star in gold zardozi work in sequins and metallic thread with central couched button. Above the stars on the LHS is couched zardozi work initial G and on RHS couched zardozi work initial M and above these are two identical five point stars as lower ones with the addition to each of two metallic thread tassles. At the bottom centre of the collar are two small rings. In a separate bag is a purple velvet rosette with central sequined button and braided surround with large tassle all in gold metallic thread.ceremonial collar, grand master -
Bendigo Historical Society Inc.
Functional object - Suitcase Made in Bendigo
G. Harper was a saddler and harness maker located at Bath Corner, Charring Cross. He advertised in The Bendigo Advertiser in 1892A brown suitcase with two metal clasps which could be locked. There are two travel stickers, ones a Victorian railways luggage Melbourne Albury which is partly missing, the other is The CHALET MT BUFFALO Nation Park. On the inside of the lid there are two labels one is black with gold letters G. HARPER NEW BAG SHOP Leather Goods & Ladies' Hand Bags Travelling Bags & Trunks Saddler & Harness Maker Charing Cross BENDIGO The other is light blue with black writing, QUALITY Guaranteed M.B. Fibre CASE.182 underlined made in bendigo, suitcase, g. harper saddler and harness maker -
Bendigo Historical Society Inc.
Leisure object - Cohn's LP Record
The recording was made in the studio of 3BO Bendigo. The record tells the of the Cohn brothers life in Bendigo. It was commissioned by Jack Magnus Cohn, the grandson of Julius Cohn about 1950s-1960s. A "12-inch L.P." black record in a brown paper cover. The cover has the records manufactures name and address printed on it. The record is single sided, the middle has a cream coloured label. "HOUSE OF COHN" Recorded in the studio of 3BO Bendigo. Produced by E. Pattison. Participating in "The House of Cohn" were Des Nicholson, Alex Cohn and Rus Pilley, recorded in the studio of 3BC Bendigo by, Bill Morell and Dug Richards produced by E. Pattison.house of cohn, 3bo bendigo, e. pattison, cohn brothers -
Bendigo Historical Society Inc.
Functional object - Hand Siren
RVB Limited is now called Sirens and Horns and is still manufacturing sirens in Australia. A hand siren with an L shaped handle two centimetres wide and five centimetres long is attached to the base of a metal cylinder ten centimetres diameter and six centimetres long with the last two centimetres tapering to a six centimetre diameter opening which flares to a 12 centimetre opening in four centimetres. The handle is connected to a thin metal disc which vibrates when the handle is turned making a loud noise. The siren is attached to a wooden handle four centimetres by two centimetres and 21 centimetres long. It is all painted red. A label attached states, "Hand HURRICANE Siren, Made in Australia, Model no. HSI, RVB Limited."siren, alarm -
Bendigo Historical Society Inc.
Functional object - Conductor's baton
A lightweight wooden baton 51 centimetres long, one and a half centimetres diameter at one end tapering to half a centimetre at the other. The thicker end has a metal cap and a one centimetre wide leather strip wound around it for ten centimetres of the baton. The top of the leather is secured with a nail and the other end has a metal ring around it.conductors baton, musical instrument -
Bendigo Historical Society Inc.
Object - EMU CREEK BUSH BAND COLLECTION: HISTORY, 1990s
. Documents and correspondence relating to the establishment of the Emu Creek Bush Band. J. Ottrey, M. Smith, H. Mcqueen, D. Ottery, P. Ellis. Includes notes about the original Bush Dance and Music Club. -
Bendigo Historical Society Inc.
Object - EMU CREEK BUSH BAND COLLECTION: LOGOS, 1990s
Documents. Emu Creek Bush Band. Band Logos. -
Bendigo Historical Society Inc.
Functional object - COHN BROTHERS COLLECTION: COHN'S GLASS BOTTLE
Clear glass bottle manufactgured by Cohn Bros. Impressed into glass on side of bottle within a circle 'CB' above which is 'Bendigo' and underneath is 'Swan Hill'. Printed on side of bottle in red and white paint is 'Quick to Quench, Cohns, Est. 1857'. Impressed around base of bottle is 'The property of Cohn Bros Bendigo and Swan Hill'.Cohnsbendigo, business, cohn bros -
Bendigo Historical Society Inc.
Functional object - COHN BROTHERS COLLECTION: COHN'S GLASS BOTTLE
Clear glass bottle, heavy glass manufacture. Embellished on side of bottle in a logo enclosed in a circle, 'CB' above which is printed ' Bendigo' Bottle has dirt on inside with large lump of soil in bottom.Cohn Brosbendigo, business, cohn bros -
Bendigo Historical Society Inc.
Functional object - Harris Collection Gate Hinge
Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s.Large metal gate hinge with hole at top and thread at the bottom. Two square metal pieces - one moveable. Part of the Harris Collection.agriculture, farm, gate hinge, harris collection -
Bendigo Historical Society Inc.
Functional object - Tobacco Cutter
Tobacco cutters were used to cut solid blocks of tobacco ( plugs) into finer pieces for smoking before the advent of tailormade cigarettes and particularly for pipe smokers. Wholesalers often included a cutter with bulk tobacco orders.Metal tobacco cutter with a detachable blade on a wooden base.tobacco cutter, smoking instrument -
Bendigo Historical Society Inc.
Domestic object - Embossed Murray's tin
BHS CollectionSmall metal tin with a detachable lid with an embossed word on the lid. The brand name is Murray's.tin box, murray's -
Bendigo Historical Society Inc.
Functional object - Beeswax
Beeswax has been used for millennia. From the 19th century on the main uses included, the making of candles (mainly for the wealthy), cosmetics ( eg. natural protection and gloss for the lips), wax for seals on mail and documents, and for polishing furniture (scrapings of wax dissolved in spirits such as turpentine). Also used for lubricating thread.Two lumps of beeswax used for a functional purpose. beeswax, wax -
Bendigo Historical Society Inc.
Functional object - Set of weights
BHS CollectionA set of six weights for balance scales, possibly for weighing gold. We have a 2, 1, 1/2 and 1/4 ounces and a 20 and 10 GM. Aileen and John Ellison Collection.weights, balance -
Bendigo Historical Society Inc.
Functional object - Gold weighing scales
Small gold balance scales in wooden case. The case is inlaid with black velvet cloth with spaces for the balance and weights. There are 2 gm weights, one 5 one 10 gm and a 2 oz in their spaces in the case. There is also one penny weight, a two penny and a 200mg. Completing the set seven differently shaped weights that are too worn out to be identified. Aileen and John Ellison Collection.gold balance, goldfields