This guards van is part of a set of matching carriages. The 1CW refers to it being a class leader or the first of that type ever built.Guards Van 1CW, steel sides painted red with a white clerestory roof, contains two compartments with a controllers section at each end of the carriage. Each compartment is made up of 3 hinged shelves, a desk with a set of shelves and pigeon holes above the desk. The ceiling is decorative pressed metal with hooks attached in rows.1CW painted on the front

Donated by Mrs Robyn Adams, daughter of wool grower Victor Clyde. Mr. Clyde owned and used this item.White, single page advertisement for Titan hinged joint fencing. Page has black text heading at the top above a black and white drawing of sheep behind a wire fence. Below the image are different specifications of fence sizes with prices. Produced by Goldsbrough Mort. Horizontal fold through middle of page but slightly diagonal.advertising, mrs robyn adams, goldsbrough, mort and company limited

The Bendigo Ordnance Factory began operating in 1942, producing heavy artillery and naval guns. In the late 1990s the then Federal Government-owned facility was sold to the multinational Thales, which continues to operate the factory today. This Bendigo Historical Society collection of glass negatives includes some slides of women working in the munitions factory. Seven slides were included in an album that was prepared for Dr Edith Summerskill who visited Australia in 1944 as part of an Empire Parliamentary Delegation. The album included photographs of Australian women working at the factory during WW2. A copy of the album is in the Collection of the Australian War Memorial.Box 1 of 3, Glass Slide Negatives of the Bendigo Munitions Factory, later known as the Ordnance Factory and then the Australian Defence Industries. Each negative is sealed between two pieces of glass. The edges are sealed with thin pieces of tape. The slides are contained in three wooden boxes with hinged lids and grooves (slots) to house them.history, bendigo, bendigo munitions factory, bendigo ordnance, bendigo adi, doctor edith summerskill, ww2, slide box 1 10165, slide box 2 10166, slide box 3 10167

Rotary mower made by "MASPORT", orange with yellow and white engine housing. 4 rubber tyred plastic wheels, 2 large on back & 2 small on front. Pull start, single bar rotary cutter. Chrome plated folding handle with white plastic horizontal cover at top. Hinged safety flap at rear.Cast into base "M MASPORT". The M has a circle around it.machinery, motor mower, rotary

A pair of small vintage handmade blacksmith tongs with two handles called reins, which are riveted together to form a hinge joint for the flat edged tongs. The blacksmith opens and closes the tongs using the handles. They are made of flat mild steel. They were used for holding steel in position and turning it over during forging operations.blacksmithing tools, forging tools, metalworking tools, furnace tongs, tools

The tin was used by Mr Des BlythA small rectangular, metal tobacco tin with red edging around the yellow, hinged lid. It has the label "LOG CABIN" Flaked Gold leaf Tobacco printed in three scroll shapes. There is an outline of a cabin in the bush, with a horse and man in the foreground. The manufacturer's details are written at the bottom. The tin is worn with age and use, and the lid is loose.On the lid: '"LOG CABIN" Flaked Gold Leaf Tobacco' is printed in three scroll shapes as well as 'Manufactured by W.D. & H.O. Wills )Australia) Ltd, Sydney, Successor in Australia to Lambert and Butler.'tobacco tins, tobacco containers, smoking equipment

The Bendigo Ordnance Factory began operating in 1942, producing heavy artillery and naval guns. In the late 1990s the then Federal Government-owned facility was sold to the multinational Thales, which continues to operate the factory today. This Bendigo Historical Society collection of glass negatives includes some slides of women working in the munitions factory. Seven slides were included in an album that was prepared for Dr Edith Summerskill who visited Australia in 1944 as part of an Empire Parliamentary Delegation. The album included photographs of Australian women working at the factory during WW2. A copy of the album is in the Collection of the Australian War Memorial.Box 3 of 3, Glass Slide Negatives of the Bendigo Munitions Factory, later known as the Ordnance Factory and then the Australian Defence Industries. Each negative is sealed between two pieces of glass. The edges are sealed with thin pieces of tape. The slides are contained in three wooden boxes with hinged lids and grooves (slots) to house them.history, bendigo, bendigo munitions factory, bendigo ordnance, bendigo adi, doctor edith summerskill, ww2, slide box 1 10165, slide box 2 10166, slide box 3 10167

The Bendigo Ordnance Factory began operating in 1942, producing heavy artillery and naval guns. In the late 1990s the then Federal Government-owned facility was sold to the multinational Thales, which continues to operate the factory today. This Bendigo Historical Society collection of glass negatives includes some slides of women working in the munitions factory. Seven slides were included in an album that was prepared for Dr Edith Summerskill who visited Australia in 1944 as part of an Empire Parliamentary Delegation. The album included photographs of Australian women working at the factory during WW2. A copy of the album is in the Collection of the Australian War Memorial.Box 2 of 3, Glass Slide Negatives of the Bendigo Munitions Factory, later known as the Ordnance Factory and then the Australian Defence Industries. Each negative is sealed between two pieces of glass. The edges are sealed with thin pieces of tape. The slides are contained in three wooden boxes with hinged lids and grooves (slots) to house them.history, bendigo, bendigo munitions factory, bendigo ordnance, bendigo adi, doctor edith summerskill, ww2, slide box 1 10165, slide box 2 10166, slide box 3 10167

This box held two rounds of 76mm Arm DC. These rounds were used in guns mounted on either Saladin Armoured cars, or, Fire Support Vehicle A.P.C. M113 in Vietnam. They used the L17A3 in practise. The projectile was filled with a mixture of explosives ROX and TNT for better blast effect. The rounds came assembled as quick firing in a cardboard tube, 2 tubes to a crate (Box). These rounds were packed at Saint Mary's, NSW, December 1968, Data supplied by the R.A.A.H.C. Part of the collection of William (Bill) Thomason. Refer Cat No 4136P for more items.This is a wooden box. It has rope handles at each end. It has 2 metal hinges and it has a metal closing clip. It has 2 pieces of timber affixed across the top. The box is painted drab olive. The box is made out of five ply. Inside is empty and there are two nylon straps fixed to front wall.On left end (stamped) "PRIM 15/5 24 MY-9-88" Top - "76mm H.E" Right end - "26B - MY 12-88 25.4 Kg 0.03 M3" Front - "2 Cart 76mm HE/T 1 24A3 F20 L17. 2 CNTR RDX/TNT 26B- MY-12-88T FU2 L17A4 70MY-12-88"ammunition storage, equipment

A large tin with a hinged lid that has a photo of three Scottie dogs in an oval frame. There are two black dogs with a white dog between them and below them is written "the three scotties". On all side is a tartan pattern in red/green/blue and yellow. The front of the tin is slightly curved. It may have contained shortbread biscuits.

Hollis Brothers were first recorded trading from 11 Weaman Row in 1840 but appear to have started trading a little earlier. The firm later became Isaac Hollis & Sons and claimed establishment from 1814. Richard & William Hollis were recorded trading in Bath Street Birmingham from 1814 to 1818 so it may be that the Hollis brothers were descended from them. The brothers were Isaac Hollis (1815) and Frederick Hollis (birth date unknown), but Frederick died 20 December 1839. Isaac was recorded in the 1841 census living in Weaman Row. He was a 25-year-old gun and pistol maker, married to Emma 1821. They had two children, Isaac (1837), and Henry (1839). After Frederick died, Isaac carried on trading under the name of Hollis Brothers until 1845 when he re-named the business Hollis Brothers & Co who traded up to 1848. In 1844 Isaac entered into a short term partnership with William Tranter at 10 & 11 Weaman Row, presumably to complete a particular contract or supply certain parts, this partnership lasted until 1849. In 1848 Isaac took in Isaac Brentnall Sheath as a partner, and the firm of Hollis & Sheath was established, expanding into 10 Weaman Row. Hollis & Sheath were licensed makers of percussion breech-loading guns. in 1861 the firm changed its name to Isaac Hollis & Sons on the departure of Isaac Brentnall Sheath. Isaac Sheath died in July 1875 By about 1870 Isaac Hollis and Henry Hollis had taken over the day to day running of the business. Isaac Hollis was responsible for the overall management and the marketing of the firm's products. Henry was responsible for manufacturing. The firm became volume producers of inexpensive trade guns and sporting guns for the South African and the British colonies. In 1870 the firm opened a shop at 44a Cannon Street in London; in 1871 this moved to 83 Cheapside. Isaac Hollis Jnr died October 1875 in Birmingham aged 37. He was never married and in 1876/1877 Henry registered a limited liability company, Isaac Hollis & Sons Ltd, but by 1879 they were again trading as Isaac Hollis & Sons. From 1879 the London shop was at 6 Great Winchester Street. From 1932 to 1933 the London business traded as Hollis, Bentley & Playfair Hollis, Bentley & Playfair finally closed in Birmingham in 1953.The shotgun is not in pristine condition and is not very significant historically or valuable, although made by a well known and respected manufacturer of firearms there are many better examples of Issac Hollis and Sons shotguns in collections and for sale. This particular example is of a standard pattern for utilitarian use of which many were made.Shotgun, double barrel, 12 gauge, with cleaning rod. Right barrel has been cut shorter and has sharp edges on the muzzle. Metal stock extension, cleaning rod comprising 3 pieces that screw together. Gun is stored in a black painted, wooden case with hinged lid. Inscribed "I. HOLLIS & SONS", SN 84245. "I. HOLLIS & SONS". SN on stock “84245”. Badge on both sides “Crown [symbol] / BV”. “Crown [symbol] / NP”, “12G inside Diamond [symbol]”, “NITRO PROOF”, “STEEL 84245” Paper note included with gun, written in felt tip pen “ENTERPRISE”. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shotgun, double barrel shotgun, isaac hollis and son, birmingham, i hollis and sons, gun makers, sporting firearm, south african firearm market, rifles for british government, hollis, bentlely and playfair

This toolbox was originally part of the equipment on the barque Marjorie Craig, which brought New Zealand timber into Warrnambool from about 1908 to 1912 for the local merchants P J McGennan & Co. The toolbox was donated by a member of a local family connected with the La Bella rescue in 1905. The toolbox has carvings and markings that make it unique and connect it to the Marjorie Craig. The Craig Line of sailing ships was from Auckland, New Zealand, and traded in timber and some coal from New Zealand ports to Australia, including Sydney, Adelaide, Melbourne and Warrnambool. They returned with produce from Australia as ballast. In 1912 the Craig fleet included the Ihumata, Inga, Jessie Craig, Marjorie Craig, Louisa Craig and Joseph Craig. The steel barque Marjorie Craig, 500 ton, was built in 1891 as the 'Hirotha', in Ardrossan, Scotland for Norwegian owners. The ship was sold to Auckland’s Donald Ross and others in 1900, then in 1905 it was sold, registered by J.J. Craig in Auckland, New Zealand and renamed Marjorie Craig. Marjorie Craig’s commanders included Master R A Campbell in 1907, J MacFarlane in 1909 and Master R.G. Holmes in 1913. From February 1908, the Marjorie Craig was regularly seen in the Port of Warrnambool with loads of timber for merchants P J McGennan & Co. In February 1912 Marjorie Craig delivered white pine for P J McGennan & Co. In April of the same year, she brought 500,000 feet of timber for McGennan & Co and again in May 1912. On May 12 1912 Marjorie left the Port of Warrnambool with 500 tons of flour for New Zealand; it seems that this was her last time at Warrnambool. Prior to 1908, the vessel Speculant brought in timber from New Zealand for the McGennan firm. The Marjorie Craig had a strong reputation for being a ‘Fast Flyer’, breaking the sailing records for voyages between New Zealand and Australia. It was reported that she made passages with a speed equal to steamboats on several occasions. One of her records was from Warrnambool to Hokianga, NZ in eight-and-a-half days. The ship broke the record in October 1913 for the time from Adelaide to Auckland, sailing in 28 days, even with a damaged ship, and the owner presented Captain Holmes with a gold watch and chain. By the end of December 1913, the Craig Line’s last two surviving sailing ships, Marjorie Craig and Jessie Craig, had been purchased by Huddart, Parker & Co. Ltd. to work as coal hulks, one in Melbourne and one in Hobart.The toolbox is significant for being created for use in 1905 when the steel barque Marjorie Craig was purchased by J J Craig and given that name. The carved ships’ images and related inscriptions within the toolbox support the origin of the toolbox. The toolbox is significant for its association with the well-known Marjorie Craig, a frequent visitor to the Port of Warrnambool 1908 to 1912, a supplier of New Zealand timber for the local firm P J McGennan & Co, and one of the fastest inter-colonial sailing ships that broke numerous records for its speed including the fastest sailing from Warrnambool to Hokianga. Wooden toolbox from the ship Marjorie Craig. Wooden box, stained brown, decorative metal handles on sides, dovetailed joints, lid with metal and leather strap hinge, tapered feet and metal keyhole at front. Inscriptions are inside the box. Box contains newspaper clippings relating to sailing and maritime topics. A handwritten tag is attached to the box. Handwritten tag: "SAILING SHIP / MARJORIE CRAIG, EARLY 1900's / TOOL BOX / PORT OF W'BOOL”. Inside the lid is a carved silhouette of a 3-masted sailing ship with pink chalk lettering "M C" and "1912". Inside the front panel is "MARJORIE CRAIG". Inside the left panel is stamped a black oval with lettering inside.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, port of warrnambool, marjorie craig, flour export - warrnambool, toolbox, steel barpue, p j mcgennan & co, craig line, craig fleet, 1891, hirotha, donald ross, j.j. craig, r a campbell, j macfarlane, r.g. holmes

This object was used to light gas burners, lamps, lights etc. The tapers were used to light a burner that was hard to reach. It may also have been used in a church to light candles. This taper and matches holder has no known local significance but is an attractive object and will be useful for display.This is a brass object made in two parts – a rectangular container holding six wax tapers and a squat jar-shaped container for holding matches. The match holder is welded to the taper holder. The tapers are bent or broken in several places. The taper holder has a hinged lid with a brass top. The match holder has an embedded shell-shaped emblem. social history, warrnambool history, metal candle taper

Folding button hook would have been used for bringing buttons through button holes for clothing such as gloves in Victorian times. this item dates from early 1900s to 1930s.Used by resident of the Kiewa Valley.Silver metal oval surrounding a straight silver metal prong which has a hook at one end and, at the other end, is attached to the oval shape which comes in and extends as a short handle. The hook is hinged on to the oval shape enabling the hook to be pushed out creating a long tool for hooking buttons. May be used on clothing including gloves. button hook, shoes, gloves, boots, clothig, victorian, folding button hook

This tin of gramophone needles was produced to be used in conjunction with a Decca Gramophone. The Decca company was founded in 1914 by Barnett Samuel and Sons and their gramophone as patented as the world’s first portable gramophone. The company became known as the Decca Gramophone Company in 1928. Portable gramophones became very popular, especially with the soldiers in World War One. Today the gramophone is largely a collector’s item and has been replaced by more sophisticated sound systems. These needles and their box are of interest as an example of a recreation product in the past. Gramophones were found extensively in homes up to the 1950s. This is a small rectangular-shaped tin with rounded edges. It has a hinged lid painted green on the top. The top has printed material in green, black and white lettering. Inside the tin is black paper lining and inside the lining are about 50 gramophone steel needles. This is not a full tin. The needles are in good condition but the tin is a little rusty‘Decca Soft Gramophone Needles Finest Sheffield Steel Use Once Only’ gramophones, history of warrnambool

Safety razors were fist produced in the late 1800s by the Star Razor Company in U.S.A. and it was a former employee of this company that produced the Gem Safety Razor in 1898. The Gem razor, to be produced in later years by the American Safety Razor Company, became one of the world’s most popular razors and in the 20th century it was the major competitor to the Gillette razor produced in the U.S.A. The safety razor has been largely superseded by the disposable razor blade and the electric razor. This safety razor has no known local provenance but it is retained as an example of the type of safety razor used in households for the most part of the 20th century.This is a silver-coloured Gem safety razor in a rectangular green Bakelite box. The box lid has metal pins acting as hinges and inside the box there are moulded sections to ensure the razor fits snugly into the box. The razor handle has an etched decorative pattern and the top part opens so that a blade can be inserted. There is a blade in this section. On box: ‘Gem’ Blade: ‘Gem Double Life, Gem Blade, British Made’ Inside the razor: ‘Gem Brooklyn New York Made in U.S.A.’ gem safety razor, history of warrnambool

The item was purchased at a PX store in South vietnam during the warSony Tape Recorder .1) Reel to reel tape recorder with two dismountable speakers attached with clips and open hinges in nickle plated metal. Two reels and tape on tape deck. Exterior of case covered in black leatherette. .2) .3) Speaker dismountable - exterior of speakers covered in black leatherette, with silver coloured plastic trim.Various sites on unit - "Sony Stereo Tapecorder"personal effects, communications, radio, tap recorder

The ambulance officers would use this splint to restrict further movement of a leg. It supports and protects a broken bone or injured tissue and reduces pain and promotes healing by keeping the injured part of the body still. Splints are now designed for specific parts of the body and leg. New materials are available eg. plastic moulds and velcro to fasten straps.Used by ambulance officers in the Kiewa ValleyThe splint is made with 4 shiny upright rods. At the bottom it has 1 moveable stand at the back and 1 solid steel foot rest at the front. These have hinges to enable up and down movement.there is green vinyl around the curve at the top and as support for the back of the leg. There are 3 green leather straps attached - on the top, middle and the foot."North Eastern Ambulance / Car 20" in white on green vinyl.leg splint, ambulance equipment, first aid

From the 1970's onward the relative isolation of regional areas was improving in "leaps and bounds". Social amenities, and life styles were changing at a great rate. Items such as this camera (recreational/life style/non professional) capture of the altering socio economic balance of rural based activities provided the catalyst for greater appreciation by city dwellers to the benefits of rural life. The greater levels of communicative avenues, especially the visual (photography, pictures, television and the internet), from the beginning of this period and throughout the time frame (1970 to the 2000s) has cut the major restraints of what was rural "isolationism".The significance of this type of camera, being a small two lens (normal, telescopic) and portable piece of equipment, allowed non professional tourists, locals or visitors to visually display the uniqueness of the Kiewa Valley and Alpine regions. This method of promotional and intimate visual reproduction of not only physical but also through personal involvement, of the photographer to the audience, a greater psychological impact, by the nature of intimacy involved. This type of photography is one of the most effective stimuli to promote the unique qualities of the Kiewa Valley region.This Item is dual lens (22mm,44mm) camera comprising of an elongated oblong shape, black hard plastic shell. It has a slightly rough surface(for a better fingers grip), two latches are located at the back, one to release the camera from its hinged protective cover and one to move to the next picture frame (film is within a cartridge).On swing cover "Kodak Tele 1 " on back in small print "MADE IN USA" On camera body "KODAK TELE EKTRA 1" underneath "CAMERA" and on slide switch(front) to change lenses:"Tele" and "Norm" kodak two lens camera, photographic hobby usa made camera

A miner's dial was used by surveyors to determine the direction of underground tunnels and roadways. The inclinometer allowed measurement of the angles at which mine tunnels descend into the ground.A rare miner's dial in a hinged timber box.This surveying instrument consists of a theodolite monsblr on a magnetic compass, which sits on the vertical tapered spigot of a base plate. Fits tripod catalogued item 4133. Inside the box lid is the supplier's label - W. Travill (successor to D. Esdale) of 146 Little Collins Street, Melbournemining, ballarat school of mines, surverying, scientific instruments, scientific objects

This Kerosene lamp was made in a similar design to marine lamps of the late 19th and early 20th centuries. The Kerosene lamps were one of the most common oil lamps used and manufactured until the 1980s. The lamp is an example of 19th and early 20th-century kerosene lamps used on board ships. The design was still made in the 1980s. Kerosene lamp; metal framed cylindrical lamp with a hinged top lid with a chain-locking device. A swinging metal handle on top pivots on two side lugs and a loop in its centre. Another similar handle is on the base. Four thin rods join the base to the top. The tank at the base has evenly distributed formed holes around it. flagstaff hill, warrnambool, shipwrecked-coast, maritime-museum, modern reproduction, flagstaff hill maritime museum and village, kerosene lamp, lighting, mantle lamp, marine lamp, lantern, maritime lamp, lighting equipment, marine technology, ship's lighting

Owned by Mervin Buckram (of Rochester), used for private use on the farm at Mewburn Park. Used approx 1940s.An important survivor from the early dairy industry. Maffra has always held a leading role in Herd testing, so it has considerable community significance. An earlier example is held at Stratford, with another, between the two, and less intact, at Old Gippstown.A round, black herd-testing centrifuge with a flat top and bottom. It has a hinged flap that opens and stands on three legs. There is a smaller round piece on top of the centrifuge which has a thick cylindrical shaped piece of metal in the centre. An apparatus at the top allows water to be driven through an impeller and there is an internal carrier to hold bottles for centrifuging."Grand prize St. Louise 1904" on side,"Wizard Tester" on top."The creamery package MFG. company Chicago. U.S.A. No. 3785" on brass plaque.herd testing

(1) Glass rectangular scale (1-(1)-6 inch); (2)ditto steel rectangular scale, (3) ditto metal cylindrical rod. Enclosed in black hinged box with purple velvet lining. 65.1 = steel scale, 65.2 = glass scale, 65.3=steel rod, 65.4 = box. See #63 “Washington Certified Standards. Labels on top of box: “Length standards used by U.B. Grayson” “40aJJR” “Washington certified standards 1.6 inch steel scale, 1.6 inch glass scale, 1.6 inch steel rod. For particulars see certificate 1915” Engraved on glass scale: “BSN 394” “H.J.G. Melb Univ. 1915” “13.0C” “1 2 3 4 5 6” Engraved on steel scale: “BSN 393, H.J.G. Melb Univ. 1915” “ruled at 12.8C” (H,J,G, = Henry Grayson)

A double hinged photo frame, brass and glass. Features photo of a small child sitting in a pram and a slightly older child holding the side of the pram. Circa approx. 1800's. Second photo in the frame is of four females sitting in front of a garden backdrop. Three of the females are quite young, the fourth is possibly the mother, all are dressed in white.

H. Bellamy Gardner, an anaesthetist at the Charing Cross Hospital, was the first to use open ether in England and was responsible for popularizing the technique. Bellamy Gardner's mask consists of a wire frame which was covered with layers of gauze. He recommended constructing a face-pad consisting of several layers of gauze which were rolled together and tied to make an oval. This was applied to the face and the mask rested on the top. Ether was then administered directly on to the mask.Oval chrome-plated steel wire frame designed to fit around a face. The wire-framed dome has both vertical and horizontal wire components to sit over a patient's nose and mouth. Ether was applied to a gauze pad which was held securely in place by a hinged wire lid. This is a modified version of Bellamy Gardner's original mask.Etched on clasp: BELLAMY / GARDNER'S / ETHER MASKether, gauze

Belong to Barbara RogalskiRectangular cane work basket - for sewing, embroidery or needlework etc. Construction of cane interwoven with blue and white plastic strips, with plastic tab and brass twist fastener. A handle attached to lid with brass hinges. Inside of box is lined with pink satin and the lid is padded with 'pearl' buttons - white plastic covered base - underside of box.domestic items, sewing, handcrafts, needlework