A pair of long handled vintage handmade blacksmith tongs with two handles called reins, which are riveted together to form a hinge joint for the flat edged tongs. The blacksmith opens and closes the tongs using the handles. They are made of flat mild steel. They were used for holding steel in position and turning it over during forging operations.blacksmithing tools, forging tools, metalworking tools, furnace tongs, tools

This card table is part of a special bequest to the Mont De Lancey Museum of hand carved furniture and items made by Mr Franz Striezel by his grandaughter Mrs Dorothy Adamson. Dorothy was a friend of Nella Lord (nee Sebire). Dorothy passed away in 2007. It was to be known as The Franz Striezel Collection. Franz Streizel came from Germany in 1886 and was one of the three recognised craftsmen (Art Carvers) in Australia who contributed to the wood carvings in public buildings and honour boards throughout Australia. The National Gallery at their request had two small panels and a tobacco jar (some of his work), donated by Mrs D Adamson. They considered these pieces highly valuable.A handmade square wooden card table featuring an ornately patterned inlaid top of lighter coloured woods. It has a beautifully carved four legged base with a shelf at the bottom above the four clawed feet. The top lifts up to reveal a storage box below which is attached with screws to the base. The lid is attached with brass hinges and screws.furnitue, tables, card tables

This lockable wooden inlaid box is part of a special bequest to the Mont De Lancey Museum of hand carved furniture and items made by Mr Franz Striezel by his grandaughter Mrs Dorothy Hilda Adamson. Dorothy was a friend of Nella Lord (nee Sebire). Dorothy passed away in 2007. It was to be known as The Franz Striezel Collection. Franz Streizel came from Germany in 1886 and was one of the three recognised craftsmen (Art Carvers) in Australia who contributed to the wood carvings in public buildings and honour boards throughout Australia. The National Gallery at their request had two small panels and a tobacco jar (some of his work), donated by Mrs D Adamson. They considered these pieces highly valuable.A lockable rectangular handmade lidded wooden box with inlaid patterned wood panels on each side and the lid. It has red velvet lining inside the lid and inner base. There is a lift our red velvet lined wooden tray. The lid is attached with brass hinges. Keys for the inlaid cabinet in the same room are stored in the tray in this box.L W is written in grey pencil on the base of the box.boxes, objects, containers, storage boxes

Biscuit tin: late 19th century Swallow & Ariell operated continuously in Port Melbourne from 1858 to 1991. The former Swallow & Ariell’s factory buildings, now The Anchorage, continue to add interest and pleasure along Stokes, Rouse and Princes Streets. Thomas Swallow, born in Reading, travelled to California and Ballarat before setting up a business making ships biscuits in Port Melbourne. His business partner Ariell died in 1877. He then went into partnership with Frederick Derham, his son in law. Company farms around Shepparton provided much of its wheat, and after 1889 most was ground into flour on the Port Melbourne premises. For the year ending 1 May 1920, the factory used 51 tons of butter, 2,740 eggs and produced more than 66 lines of biscuits. They also made puddings, elaborate cakes and ice cream. S & A was a significant employer – locally referred to as S & A College. At the height of the South African war it employed 1900 workers but even in 1991 it employed 450 people.Pink and brown clover-shaped ornamental biscuit tin decorated with pictures of a girl (central panel), 2 dogs (lower section), 2 rabbits (upper left-side panel) and 2 birds (upper right-hand panel. It has floral designs around the outer edges of both the tin and the lid which is hinged at the top of the tin.Inside the lid: "Swallow & Ariell, Ltd. Biscuit Manufacturers, Port Melbourne. Prizes received at all international & inter-colonial exhibitions"biscuit tins, tins

Used by Mr. A. Baker Snr. early 20th Century. A small damaged rectangular, metal tobacco tin with red edging around the yellow, hinged lid. It has the label "LOG CABIN" Flaked Gold leaf Tobacco printed in three scroll shapes. There is an outline of a cabin in the bush, with a horse and man in the foreground. The manufacturer's details are written at the bottom. The tin is worn with age and use, and the lid is loose.Tobacco Tin - 'Log Cabin Flaked Gold Leaf Tobacco W.D. & H.O. Wills (Australia) Ltd. Sydney Successor in Australia to Lambert & Butler.'tobacco tins, tobacco containers, smoking equipment

This inkwell is part of a collection donated by Mrs. Jean Raper of Wodonga.This item is from Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper. A small inkwell with hinged lid. Inkwells such as these were used by naval officers during World War 1. The mark on the lid has been identified as being of either Austrian or Russian origin. KKA PRIV is an abbeviation for Kaiserlicher Konigslicher Adler Privilig – Imperial Royal Eagle Priviledge. This is said to be the Austro-Hungarian equivalent of ‘By Appointment to Her Majesty’.Engraved on inner cover `K.K.A. Priv" with double headed eagle and anchor.vintage inkwells, writing implements, naval equipment

Colour photograph of a Coutt's Mask lying on a wooden table. The mask is circular, made of metal and has a curved opening with a raised lip that is resting on the table. There is a small metal loop on the mask and a thin metal hinge with screws is curved from one side to the other. A reddish brown residue like rubber is stuck around the rim of the mask.anaesthetic equipment, mask, coutt's mask

Arthur E. Woodley donated the WW1 Military Carbide Signal and General Purpose Lamp to Frankston RSL. It was given to Arthur E. Woodley of Crib Point during the 1960s by Captain Ivan E. Layton MBE who was then the Executive Officer of Melbourne Legacy. During WW2 Ivan Layton was secretary to General Blamey. Ivan Layton died on 15th September, 1979. The carbide workings of the lamp were removed because of corrosion, otherwise it is almost complete.WW1 Military Carbide Signal and General Purpose Lamp which is round and made of brass. The lamp has a latched and hinged brass top. Brass and wood hinged handle with knurled access knob which is situated at the top of the lamp. In between the handle uprights is a round chimney flu which allows heat to escape. Approximately one third down from the top of the lamp there is a brass side handle. Immediately to the left of the handle is a rectangular curved view port with brass cover. Directly opposite the side handle is a convex glass window. Air vents are located at the bottom of the lamp. Inside the top half of the lamp is a chamber which contains the carbide lamp and perpendicular sleeves for the insertion of coloured glass panels. The bottom half of the lamp contains the carbide.Manufacturers Stamp, 'PLAYER & MITCHELL LTD', 'SENTINEL WORKS' 'BIRMINGHAM'ww1, military, brass, lamp, world war 1, round, great war, carbide, signal lamp, player mitchell, birmingham

This box of sampled is typical of those issued to official manufacturers of military badges, insignia, and buttons to ensure the gold colour remained consistent. These badges were held by the Third Army Quality Assurance Unit (3AQAU). The manufacturers were often local companies, where an example of a typical supplier is KG Luke who also manufactured the Brownlow Medal, the award given annnually to the Australlian Football League's best and fairest player.A rectangular wooden box with a black velvet-like cushion in one side. cushion has 10 examples - 2 of each kind - of military insignia and buttons of two different shades of gold colour. Box opens on one long side and is hinged (4cm brass hinges with 3 screws in each side). Clasps on opposite long side, also of brass. Wood has been stained a dark brown. Base off box shows 14 brass staples. Corners of base show 2 nails, possibly brass. A typed sheet of paper is attached to the inside of lid, dating from 1993, explaining usage of samples. Paper tag affixed to cushion between samples - Department of Defence authenticating samples in box. Tag attached with fabric tape and secured using a lead seal.Paper taped to inside lid - title 'SEALED SAMPLE 8455-03311' - a lengthy description of contents and box follows. Please refer ot photograoph for further details. Typed tag on cushion - 'Department of Defence/SEALED SAMPLE/Sealed sample Number 03311/Stock Number 8455/Description STANDARD OF GOLD COLOUR FOR INSIGNIA, BUTTONS AND BADGES (ANODISED) ALUMINIUM ALLOY 1150/APPROVED. The supply is not to differ from this sealed sample except as endorsed on the back hereof./D Darby [signature] 29/06/1993 /EDE VFE SCDDG [stamped].' Reverse of tag (stamped in red within a thin lined border) - 'SEALED SAMPLE/NOT TO BE/DESTROYED OR/MUTILATED' badges, military insignia, button

Sewing machine, Singer, hand operated by crank handle, rounded wood case with lock on one side. Machine has hinges at back and recessed accessory compartment containing pins and needles. Machine has shuttle bobbin. Singer Trade Marks gold transfers on lid and machine, with Singer badge on front of machine. Serial Number "F1841984" on front right. Serial Number "F1841984" on front rightflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, singer, singer sewing machine, dressmaker, taylor, domestic machines

This scent bottle would have been attached to a belt or handbag and would have belonged to a woman of some means. It would have been in use when the owner was outside or travelling and used to combat the unsavoury smells of a farm or industrial area. This item is of interest as an object used by women more than a hundred years ago. It has no known local provenance and will be useful for display This is an egg-shaped perfume bottle made of opaque glass (opaline?). It has an inner lining and cotton wool inside the lid of the top. The top is brass with a brass hinge. Attached to the lid is a brass chain and circular ring to attach the bottle to a chatelaine belt or handbag. The chain was once attached to the bottle in two places but one section has been broken.social history, warrnambool history, scent bottles, milk glass scent bottles, antique scent bottles

This small, slim case was manufactured to contain reading spectacles in a secure but yet "manageable pocket or purse" environment. It was manufactured to contain reading glasses that would not exceed 12mm in thickness. The product was targeting the "professional" reader ie. accountant, lawyer, business and property managers. Because it was made for a "eyesight" specialist to contain "prescription" reading spectacles the quality had to be of a higher level than cheaper "off the shelf" ones. This case was made and used in the late 1800's and early 1900's.This case, for spectacles, holds a significant position in that it points to a time in history when rural Australian families required to travel long distances to obtain professional "eyesight" treatment which, on the whole, were only available in the capital cities (in this case Melbourne). In the pre 1960's, the greater the distance from capital cities for Australian rural folk to seek professional medical, dental, nose ,eye and throat specialists the greater the time involved resulting in the greater expense. This "isolation" brought about increased costs not experienced by city residences. The quality and durability of this case was a pre-requisite for the Kiewa Valley based resident.This slim spring lid spectacle case has a body of light steel over layered by a fine skin dyed(dark brown) leather coating. The inside, of the case, has a 1mm lip opposite the hinged end (to secure the reading spectacles within the case). The inside is fully covered by a "royal" purple felt (to provide the spectacles with a scratch free enclosure).At the outside base in gold lettering "H.B. BISSELL" underneath "EYESIGHT" underneath "SPECIALIST" underneath "BARKLY st", underneath "FOOTSCRAY"personal effects, spectacles, eye fashion, reading glasses

Milk and cream were stored in steel cans for transportation to stores or local dairy companies.The dairy industry is and ha been one of the major industries in the Kiewa Valley. This cream can belonged to the Creamer family who owned and operated a dairy farm in the Kiewa Valley.Straight sided steel can with movable ring handles at the top on each side.The lid is slightly curved with a hinge on one side and securing clasp on its opposite side with a moveable ring handle attached (to the securing clasp).A plaque is attached on the top with an inscription. It appears one plaque has been removed from the lid and one from the side of the can."A. C. Bryon, Baranduda" on plaque on lid.dairy; cream can; kiewa valley; creamer family

This medallion was awarded by the Commissioners of the Warrnambool Industrial & Art Exhibition to ten boys from the Kew Asylum who sent handmade items (basketware, matwork etc ) for display at the Education Court of the Exhibition. The Warrnambool Industrial & Art Exhibition, held in Warrnambool from December 1896 to March 1897, partly to commemorate Queen Victoria's Diamond Jubilee, was a signal event in Warrnambool's history, with one report suggesting that over 70,000 people attended the various activities held over these months. These included concerts, operas, displays, business stands, sporting events and competitions. The earliest surviving voice recordings made in Australia were produced in Warrnambool at this Exhibition and there were various other 'firsts'. The medallion awarded to the boys at the Asylum for the high quality of their work, was made by the Melboune firm of Stokes and Sons who had a stall and machinery at the Exhibition and made small souvenir Exhibition coins on the spot for visitors to buy. As well as the gold medallion the boys were also given by the Commissioners some small souvenirs to the total value of 12 shillings. This medallion is of great historical value as it is a precious and rare memento of the 1896-7 Warrnambool Industrial & Art Exhibition, an important event in Warrnambool's history..1 A round gilt-bronze medallion with a bust image of Queen Victoria and lettering on one side and a laurel wreath and lettering on the other side .2 A square black box with a metal hinge and clasp. The inside is lined with dark blue satin and silk and has a sunken area to hold a medallion. The maker's name is printed in gold lettering on the inside top of the lid.Warrnambool Industrial & Art Exhibition 1896-7 Diamond Jubilee Awarded to Idiot Asylum Kew For excellence of Workmanship Basket & Matwork & Photos of Asylum Stokes & Sons Medallists Melbournewarrnambool industrial & art exhibition, kew asylum medallion, medallion, 19th c exhibition warrnambool, warrnambool, warrnambool history

This can opener was from the Vietnam War era. Utensils like this were issued with every ration pack to all servicemen and women.Utensils like this have social significance due to the ubiquity of their use in the field, therefore many Vietnam era veterans may have memories of their use. This item is in good condition and as such, is a representative example of a tool that was widely used. Spoon and blade opener, attached via a turned over piece of metal fashioned into a hinge below which there is a curved cut out with a point which attaches to the side of the can. Handle has two ridges presumably to aid handling of utensil. Punched hole (3 mm across) at end of handle possibly to attach via a string. Inscription on top of handle.Inscribed on top of handle "1966 CARR D[broad arrow]D/7330/66/010/0931"vietnam war, 1960s, utensil, ration, food

Medal belongs to B.A. Russ, No. A38415, RAAF 1952.1) Medal case, metal, black vinyl covering with white inside lining under lid. Black velvet under medal. Hinged on left hand side. .2) Bronze coloured medal with crown on top. Circular with striped ribbon attached. Yellow stripe in centre flanked each side by black, white, green, blue and red stripes. .1) "ANNIVERSARY OF NATIONAL SERVICE 1951-1972 MEDAL" on front of case in silver print. .2) "ANNIVERSARY OF NATIONAL SERVICE 1951-1972" around edge of medal on front. "A 38415 B A RUSS" engraved on bottom edge of medal.award, medal, nationsl service.

Items souvenired, collected by Horace Eli Hambly No 794 AIF. Refer 2325.2 for his service history..1) Tin, metal, gold colour with hinged lid, ornate on lid with "Princess Mary Centre", "Christmas 1914" - gift tin to troops. .2) Badge, metal, brass, "Letters 'L.H'" with lugs & pin. .3) Same as .2). .4) Badge, metal, round centre has letters "RSA" in white & red. "Returned Soldiers Assoc. Victoria"..4) "1904"numismatics-badges, societies-service clubs

The traditional scale consists of two plates or bowls suspended at equal distances from a fulcrum. One plate holds an object of unknown mass (or weight), while known masses are added to the other plate until static equilibrium is achieved and the plates level off, which happens when the masses on the two plates are equal. Medication given to patients at both Aradale Mental Hospital and J Ward had their does measured using these weights and scales - and some evidence of residue remains.The scales are in excellent condition and a good example of medical equipment used in Aradale Mental Hospital and J Ward. Measuring scales for medications Timber construction with glass lid Small crack along the left hand side of scales Two drawers contain four weights in ounces Case painted in black lacquer Metal hinges and three brass knobs (one missing from right lower drawer) Small piece of folded butcher paper in left hand drawer No manufacturer markings or serial numberspsychiatric history, mental health, aradale mental hospital, j ward

This item and it’s associated gas mask (Cat.No. 0096.1) are of a style typical of German WW2 gas mask and connister, but the use of vinyl instead of rubber and the Spanish manufacture of the gas mask suggests post WW2 manufacture. German WW2-style tin gas mask container, with hinged lid with clip. Lid incorporate stowages for anti-fog lenses (2 in grease-proof envelope). Three loops for attaching webbing. Webbing carry straps missing. Olive green paint. Removeable cover from gas mask filter (ref: Cat.No. 0096.1) stowed loose in cannister.

Ron White used these dry fuel sticks for cooking when camping. He was involved in the Mt Beauty Youth Club.Ron White assisted with the Mt Beauty Youth Group. See KVHS 1282Each packet has dry fuel sticks which are solid white powder sticks used for warming and cooking. There are several sticks (or tablets) in each packet. There are two packets in a hinged brown and gold tin box with the photo of a man playing a violin on the lid and three packets n a coloured tin with a red base and the photo of a steam train on the detached lid."Solid Fuel Hot Pocket Warmer" and "Esbit Pocket-Sized Stove" on packets stored in 'Sweetacres" embossed on the base of the tin. "Solid Fuel Sticks for Hot Pocket Warmer" and x2 "Esbit Dry Fuel" on packets in "Griffiths Sweets Pty Ltd Melbourne" embossed on the base of the 'train tin'. ron white, fuel sticks, camping, cooking

The fire screen was part of the original furnishings of the Lighthouse Keeper's Quarters in Merri Street, Warrnambool. It was made by Lighthouse Keeper, Thomas Hope. Thomas served two terms as an assistant lighthouse keeper in Warrnambool. His first term was from 1905 to 1907. He later returned from 1910 to 1913, when he was appointed as Keeper five months after the untimely death of his predecessor Peter Quinn. Woodworking was one of Thomas Hope’s hobbies, and the three-panel fire screen he made as a lighthouse keeper is now in the Flagstaff collection and is displayed in the Lighthouse Keeper’s Cottage. Thomas Hope 1857 - 1928 Thomas James Hope was born in Camden, Surrey, England in 1857. His father, also called Thomas, was reputed to be a member of the Royal Family, and Thomas Hope Junior his illegitimate son. Thomas was subsequently brought up on the estate of the Earl of Hopetoun in Somerset and it was thought that Thomas was the Earl’s grandson. Against the wishes of those in charge of Thomas, he joined the navy at an early age, seeing much of the world until he settled in New Zealand at the age of twenty-four. After some years in New Zealand, he came to Australia to live. One of the jobs Thomas Hope had prior to becoming an assistant lighthouse keeper in 1896 was as a cook in the Lunatic Asylum at Sunbury, Victoria. He served as an assistant keeper at Shortlands Bluff, Gabo Island, Split Point and Warrnambool, retiring in 1918. He bought a house in Nicholson St, Warrnambool and died in March 1928. He is buried in the Warrnambool cemetery. Thomas Hope is recorded in family history as being of short stature and, not surprisingly given his alleged aristocratic connections, possessed a beautiful speaking voice. He and his wife Elizabeth nee Waters, whom he married in New Zealand, had six children (Thomas, killed in World War One), Ellen (Nell), Nora (who was married at the Warrnambool lighthouse keepers cottage), William (who died in Warrnambool), Marion and Alan. Joseph Hoover (Dec 29, 1830, to Aug 7, 1913) Joseph Hoover, the printer of the pictures on the screen, was born in Baltimore, of Swiss-German heritage. He was trained as an architectural woodturner. In 1856 Hoover moved to Philadelphia and began producing elaborate wooden frames in his wood-turning and framing business. By 1865 Hoover had started to produce popular prints for publishers and artists, which included noted Philadelphia artist James F. Queen. In the 1880s Hoover set up a complete plant specialising in chromatography, the process of producing colour prints from lithographic plates. The coloured prints he produced were affordable to business and private customers. In 1893 his son Henry L., a trained lithographer, joined the company as overseer and it was called J. Hoover & Son. It became one of the largest in America by the turn of the century. Hoover won a medal for Excellence for his Chromolithographs of James Queen’s works. In 1904 Joseph’s other son, Joseph W, joined the business as a partner and the company was called Jos. Hoover & Sons. Hoover died of a heart attack in 1913. He was survived by his wife and six children: two sons who were also his business partners, and four daughters. The firm continued in production until around 1985. Hoover’s prints included scenes, still life and landscapes of America and other locations. They were sold in America and overseas to countries including Canada, Germany, Mexico and England. The three-panelled screen in the Lighthouse Keeper’s Cottage was made by the Assistant Lighthouse Keeper, Thomas Hope during one of his two terms at the Lighthouse Keepers' Quarters. It is the only object in the collection known to be connected to Hope. The Lighthouse Keeper's Cottage is part of the Lady Bay Lighthouse Complex, which is listed on the Victorian Heritage Register for being of historical, scientific (technological) and architectural significance to the State of Victoria.Fire screen comprising three black wood framed panels hinged together. Each panel contains a glass-encased print depicting a rural landscape. Ornate stencil cut wood edging and quilt-inspired parquetry sits above each panel. The central panel is taller than those either side. Screen is lined in black-painted cardboard.Printed at the base of each of the three prints “COPYRIGHT 1896 BY J. HOOVER & SON, PHILAD’’A.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, firescreen, thomas hope junior, ellen (nell) hope, nora hope, william hope, marion hope, alan hope, jos. hoover & sons of philadelphia, lighthouse keeper, assistant lighthouse keeper, carved screen, merri street, lighthouse keeper's cottage, lighthouse residence, lighthouse, wood carving, lighthouse complex, lady bay lighthouse, fire screen

This ink-well was used in the Bacchus Marsh Court House, possibly for book-keeping and/or for court records. This type of ink-well and pen were in use everywhere in schools, businesses, courts, etc before the invention of the type-writer and the ball-point pen. Clerks were usually male and a good copperplate hand-writing was admired. Ink was often mixed by hand used a powdered ink mixed with water.Of local significance in the history of the town of Bacchus Marsh.Round pewter ink-well, with hinged lid and ceramic insert. Five round holes pierced in inner rim of metal to hold pens. Two ribbed bands around exterior of pot. Two bands indented around top of lid. Insert designed to hold ink. Pen with marbled blue handle, metal nib holder and metal nib.Indecipherable imprint on bottom of pot, possibly machine markings. Illegible written marks on side of pewter pot. Ceramic insert marked on side and bottom by red and black ink.ink, ink well, hand writing, record keeping, pens, nibs, clerical work, court records

The Orient Steam Navigation Company Limited launched the Ocean Liner RMS Orion in 1934 and it remained in operation until 1963. The twin screw steamship was built to carry first class and tourist class passengers, over 1100 in all, plus almost 500 crew from Europe to Australia in comfort. The ship had a single funnel and a single mast. During WWII the vessel served as a troop carrier. The ventilation system noted on the plan, Punkah Louvre System, was designed for heating fresh air ventilation in buildings, ships and railroads. The system originated from Thermotank in Glasgow, Scotland. The ship plan for the RMS Orion is significant for its connection with the vessel. The ship was a leader, with several 'firsts'; the first Orient Line ship to be built with a single funnel since 1902, and the first to be painted in the Orient Line's livery, with a corn-coloured hull. It was the first liner to use chromium and bakelite materials for the surfaces throughout the ship, which provided greater resistance to the sea. It was also the first British ship to be fitted with air conditioning.Plan: printed provisional line drawing of the Orient line vessel "R.M.S. Orion". Inscriptions are printed on the plan. There are diagrams of six decks included in the plan. The ship is built for tourist "B" accommodation. The plan's Notices include details of the cabins including wardrobes, drawers, hinged seats, mattresses and bunk numbers. It also notes that there is a Punkah-Louvre System of Ventilation.Printed on the plan: "PROVISIONAL PLAN" "LOWER PROMENADE DECK" "UPPER CABIN DECK" "MAIN CABIN DECK" "LOWER CABIN DECK" "SUN DECK" "PROMENADE DECK" "ORIENT LINE / R.M.S. "ORION" / 24,000 TONS / TOURIST "B" CLASS ACCOMMODATION" "Owners: Orient Steam Navigation Company Limited"' "Managers : ANDERSON, GREEN & CO. LTD" "7 BISHOPS GATE, LONDON, E.C.2" "Chief Passenger Office : 14 Cockspur Street, London, S.W.1" "Branch Passenger Office : 1 Australia House, Strand, W.C.2" "notices"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, rms orion, plan, ship plan, provisional plan, orient line, orient ship, vissel orion, class b passenger accommodation, punkah louvre system of ventilation, deck plan, ship ventilation, ship floor plan, orient steam navigation company limited, anderson green & co ltd, steamship, ocean liner, war ship, troop carrier

First State Watch Factory: This factory was founded in 1930 under orders from Joseph Stalin, the "First State Watch Factory" was the first large-scale Soviet watch and mechanical movement manufacturer in the USSR. Via its USA-based trading company (Amtorg), the Soviet government bought the defunct Ansonia Clock Company of Brooklyn, New York in 1929, and the "Dueber-Hampden Watch Company of Canton", based in Ohio. The soviets moved twenty-eight freight cars full of machinery and parts from the USA to Moscow in order to establish the factory. Twenty-one former "Dueber-Hampden" watchmakers, engravers and various other technicians helped to train the Russian workers in the art of watchmaking as part of the Soviet's first five-year plan. The movements of very-early products were still stamped "Dueber-Hampden, Canton, Ohio, USA" (examples of these watches are very collectible today). In 1935 the factory was named after the murdered Soviet official Sergei Kirov. During the second world war, as the Germans closed in on Moscow in 1941, the factory was hurriedly evacuated to (Zlatoust USSR). By 1943 the Germans were in retreat, and the factory was moved back to Moscow, adopting the "First Moscow Watch Factory" name. In 1947 the first wristwatches under the brand name "Pobeda" and the first Marine Chronometers and Deck watches were produced. By 1951 the production of wristwatches had increased to 1.1 million. In 1975 new machinery and equipment for manufacturing complex watches were imported from Switzerland. The first chronograph called "Okean" (3133) was produced for the space station "Soyuz-23."The Chronometer is of recent manufacture and an excellent example of the type of instrument used to navigate the seas in the 19th century. It is of good quality and of a type regarded as very accurate and well made. The maker, First Watch Factory, has a dept that is still producing the "8916" standard Chronometer for horologists and collectors. Marine chronometer of Russian make in wooden case, metal handles on sides, inscription on a metal plaque on the front of the case. Polished square wooden outer case with green felt lining and, a leather carrying strap and buckle. Outer case is hinged and has a metal latch on the front. Outer case has a red velvet covering with a button and loop closure. Inscription on box are in Russian & translate as follows: ХРОНОМЕТР, = CHRONOMETER МОРСКОЙ, = NAUTICAL ГОСТ, 8916-77 = Gost ЛОЛ ЕТ, on dial face = LOL ETflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chonometer, russian, watch factory, marine, navigational instrument

Test plate rectangular glass slide with rulings under circular cover glass within yellow circle and brown border enclosed in red hinged box with blue lining. Described as “A sample Microscope slide - Test plate with rulings from 30,000 to 120,000 per inch”. This is the only surviving ruling reaching up to 120,000; hence is both unique and valuable.Labels on slide: “Test plate 10,000 to 120,000. Ruled by H.J. Grayson, Melbourne”. No of lines per inch Band 1-10,000 2-20,000”. On label on side: “No of lines per inch Band 3 -30,000 4 - 40,000 5-50,000 6-60,000 7-70,000 8-80,000 9-90,000 10-100,000 11-110,000 12-120,000”

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel punch forceps. There are two circular finger grips at one end, attached to short arms that meet at a point. A long narrow shaft extends perpendicularly from this point, ending in a small, hinged, toothed grip. Writing engraved on one arm of forceps reads 'Stainless Germany'. Writing engraved on opposite side of forceps reads 'malyoung'.'Stainless Germany'; 'malyoung'gynaecology

Illuminated address presented to Mr. & Mrs. Henry A. Dickson. Dated 14 August 1929. This address was presented on the occaison of the Dickson's departure from the Dumbalk District. It was presented by the residents in appreciation of their valuable services to the community during their 38 years in residence. Presented in a decorative hinged card folder. Features painted flowers, trees and a country scene of a farm with cattle in the foreground.