*Leather case - crocodile skin - black with brass corners to lid and base and brass lock with security code. Lining black and white plastic, padded with 3 compartments in base and 3 loops on the lid and evidence of 5 loops missing - 4 rubber stops on base and carry handle on top. *possibly fauxGold writing on black leather label inscribed "THE / Johnnie Walker / TROPHY".

1890's Surrey or White Chapel BuggyHistoricHorse drawn wooden buggy. Long wooden shafts. Sometimes known as Piano Box Buggy. 4 large wooden wheels with rubber strip on wheel - 16 spokes. Black leather seats with buttoned upholster. Leather canopy cover. Leather arm rests. Side lamps and small step down

A cream coloured cardboard cover with black information on the front. Top right hand side reads DSN 7610-66-036-6422. There are two rubber stamp marks on the front which are very faint. Under the Australian Coat of Arms is the information of the booklet. The booklet is held together by two metal staples.australia - armed forces - service manuals, coaching, battle shot, rifleman

Yellow moulded rubber soft or flexile toy Rhino with words "Look Listen, be alert around trams / Yarra Trams" on one side and "A tram weighs as much as 30 Rhinos". On the underside has a grey button when pushed makes the sound of an "electronic tram" gong - twice. Two copies held.trams, tramways, yarra trams, safety, rhinos

The Dräeger Pulmotor was developed in 1907. It addressed previous concerns about lung injury, by limiting both the inspiratory and expiratory pressures. Although still controversial, the Pulmotor was widely distributed and commercially successful. Oxygen from cylinders provided both the inspiratory gas flow and the driving mechanism. Expiration was an active process and gases were sucked from the lungs by negative pressure created by a Venturi effect. This device came with a facemask and harness, with a caution that the operator should take care to prevent air entering the stomach.Draeger resuscitation kit, inside wooden case with handle. Case contains small heavy gas cylinder with large beige handwritten 'S. M E' inscription on one side. Due to water damage case missing pieces of plywood in corner and floor of case bubbled and swollen.|Rubber decomposed rigidinspiratory, expiratory, pulmotor, negative pressure

Surgical tape or medical tape is a type of pressure-sensitive adhesive tape used in medicine and first aid to hold a bandage or other dressing onto a wound. These tapes usually have a hypoallergenic adhesive which is designed to hold firmly onto skin, dressing materials, and underlying layers of tape, but to remove easily without damaging the skin. Surgical tape is often white because it contains zinc oxide, which is added to help prevent infections. In 1845, Dr. Horace Day made the first crude surgical tape. It was created by combining India rubber, pine gum, turpentine, litharge (a yellow lead oxide), and turpentine extract of cayenne pepper and then applying that mixture to strips of fabric. It was the first “rubber-based” adhesive tape called Leukoplast for the German company Beiersdorf AG. Larger scale manufacturing of similar medical tapes began in 1874 by Robert Wood Johnson and George Seaburg in East Orange, NJ. (Johnson & Johnson Pty). 1921, Earle Dickson, who bought cotton for Johnson & Johnson, fixed a piece of gauze to some cloth backed tape and the first Band-Aid ® was invented. A roll of white adhesive surgical tape on a metal reel width 2cmaround wheel: ADHESIVE TAPE MANUFACTURED / MINDS MAKES REPAIRS Symbol of a butterfly in centre medical dressings, early settlers, moorabbin, cheltenham. bentleigh, johnson & johnson pty ltd, adhesive surgical tape,

Electric fans were used for cooling rooms prior to air conditioning.This portable fan was used on the Kiewa Hydro Electric Scheme by office workers.Green metal swivel fan with base, motor and 4 cream angled 'wings' covered by 3 wire rings connected by 6 pieces of curved wire that cover the blades at the side and front. An electric grey rubber cord is attached. There is a lever in the base for moving from 'off to 1.2.or 3' (but no marks to indicate these positions.)Base: "Elcon Fan / Made in Australia"electric fan; state electricity commission of victoria; office equipment; kiewa hydro electric scheme;

The Percy Uebergang family lived at Tooram Park, Allansford from 1912 until 1992. Percy and Myrtle Uebergang's children were twins, Ray and Joyce born in 1926 who lived at Tooram Park until their deaths, Ray in 1986 and Joyce in 1992. Neither Ray nor Joyce married and following the death of her brother Joyce set up the Ray and Joyce Uebergang Foundation which supports the local community. This milkshake maker is part of the collection of items given into the care of the Cheese World Museum. Uebergang catalogue No.N42 A single beater electric commercial milkshake maker with black lead, mounted on a white 'artificial marble' base with four rubber stops; and straight-sided aluminium mixing container. An extendable metal column (to H44cm) with a side clip attached is used to hold the container. The electric motor is housed in a slotted round metal casing.Hamilton Beach Mfg Co. Builders, Racine, Wisc. Made in USA. Pats Pending. Volts 220-50c. No.4N14412Aallansford, hamilton beach manufacturing company, usa, milkshake maker, milk, retailing equipment

Blue landscape Connelly , Tatchell & Dunlop envelope addressed to Mr Holden , Bridgewter on Loddon contains invoice for 10/6 payment for discussion for sale of property. Stamp ' unclaimed at Bridgewater on Loddon', two one penny stamps on envelope, various rubber stamps on back of envelope from Melbourne and Bridgewater, dated 1893.business, legal, connelly & tatchell

Well made, simple and practical. Probably home made by a handyman. Easy to use and clean. Laminex colouring typical of 1960/1970'sRed vinyl seat, laminex step 32cm from floor. Arms of table screwed onto frame so can swivel - be lifted up over childs head. Table rests on top of frame. Red and white laminex back support table and step. Rubber covers on feet. Silver and dark red. None

A Prince 'professional' tennis machine, with ball delivery cord, and 5 dispensing chamber cylinder caps. Machince essentially comprises of a ball container, from which balls collect into a six cylinder dispensing chamber, and then shot out, one after the other, through a retractable cannon. Materials: Metal, Plastic, Rubber, Acrylictennis

Between 1867 and 1920, anaesthesia for dental operations was often maintained by blowing the vapour of ether or chloroform into the patients' oral or nasal pharynx. Junker's inhalers are a "blow over" device used with a hand-held bellows to bubble air through liquid chloroform and to the patient. It was initially intended for use with bichloride of methylene, a mixture of chloroform and methyl alcohol. Ferdinand Ethelbert Junker introduced his inhaler in 1867 as appointed physician to Samaritan Free Hospital for Women (although it didn't have that name until c.1904). Glass jar with liquid measure markers etched onto. The jar has a metal lid, with a metal tube descending into the jar. Two metal tubes are protuding out of the top of the lid, and each has a small section of rubber tubing attached. There is also a metal hook, used to attached the jar to the physicians (anaesthetist's) lapel.Stamped into frame of metal lid: LONDON MADEjunker, blow over, chloroform, samaritan free hospital for women

Steel Ammunition box - It has a hinged lid with a steel handle on top. One end. has half of a hinge assembly. The other end has a cantilever closing clip. The box is a drab olive colour. Inside the lid has a silicone rubber seal so that the ammunition box will be waterproof when clamped shut.Stencilled on front is “1000 cartridges 5.56mm. Blank M200 Lot: T2229-87”ammunition box, equipmment, blank rounds

This gas mask dates to 1942 in the Second World War. This mask is representative of a style of gas mask that was widely distributed during the Second World War, and can be found in other Australian collections. Rubberised face mask with two circular plastic windows with metal rim for sight by wearer. The mask is fitted by six black elastic straps with red and yellow stripes, which are attached via metal buckles at six points at the top, middle and bottom of the face. Straps converge on rubber backed fabric cross-shaped component which is stamped. Over mouth area is a filter comprised of several layers of metal sheeting with holes. At chin, a metal fitting fits into a black rubber concertina tube which fits into the top of a rounded rectangular container with ribbed edges. Both attachment points have what appears to be adhesive fabric tape wrapped around the closure, possibly to make the system air tight.On cross-shaped component, "No 410/22-12-42" Stamped on mask, "O.T.R.C/6/42", "NORMAL" Filter mask stamped with, "EBRO/1942", "No 4/G.P. 1942" Canister stamped with "WILLOW/[broad arrow]/ML42(?)3/GS174". On canister base "No4A/WILLOW/1942/257/EVI" gas mask, breathing apparatus, chemical warfare, second world war, world war ii, world war 2

Deep red holder with sliding black rectangular button. Alphabet written in white down each side of slit in lid. Black press down lever at bottom edge releases the lid. Inside are lined cards - one for each letter of the alphabet. Area for telephone number is shown with a symbol. Four rubber pads on bottom.teledex, telephone directory, alphabet cards

Rotary mower made by "MASPORT", orange with yellow and white engine housing. 4 rubber tyred plastic wheels, 2 large on back & 2 small on front. Pull start, single bar rotary cutter. Chrome plated folding handle with white plastic horizontal cover at top. Hinged safety flap at rear.Cast into base "M MASPORT". The M has a circle around it.machinery, motor mower, rotary

Map of 15 residential allotments for sale, with seven rubber-stamped SOLD and one with handwritten notation "$5650 1968". Subdivision includes Barrow Drive and Barnic Road, Heathmont. Agent - H.G. McLean & Associates Pty. Ltd., 166 Canterbury Road, Heathmont Vic., 3135, Telephones : 870-3422 A/hrs 870-5879.

Prue Forster believes this to be the bottle given to her by 'Auntie' Maud Pepper, for Frank Forster's collection. Prue met her when she was working for the Aboriginal Health Service (1980-1993). 'Auntie' Maud Pepper was living in Preston at the time but had come from the Western District. The bottle was her own and she told Prue how fine material was used over the mouthpiece instead of a rubber teat. 'Auntie' Maud Pepper was a founder of ACES (the Aboriginal Elders Residence & Convalescent Home.) Additional sensitive notes on file.Glass boat-shaped feeding bottle with one end flattened and a spout at the other. There is a larger opening with a lip on the top surface. There is a small chip on the flattened end.infant feeding, infant care

This douche, with the manufacturers object description of "heisswasserspulungen" which translates as healing water douche, came from the Edward Rowden White Estate. The heisswasserpular designed by Dr Walzer-Frank was used as a vaginal douche by attaching a rubber hose to the glass connector which was then inserted into the vagina. Acquired from Dr Harold Attwood, the Curator of the Medical History Unit, University of Melbourne, 2 April 1996. In a letter to Geoff Bishop ... " I think they are best held in your collection rather than here." (see accession file)Transferred from the collection of the Medical Unit (Brownless Medical Museum) University of Melbourne, from the Sir Edward Rowden White Estate. Sir Edward (1884-1958) was a Foundation Fellow of the Australian Regional Council of RCOG and was the first Chairman of the Arthur Wilson Foundation, and created (with his brother) the EA Rowden White and Edward R White Foundation for Medical Research at the Royal Women's Hospital in 1955. Black bakelite bulb with glass douche nozzle and irrigator connections at each end. Stored in original box. Handwritten in blue pencil on side of box: "Vaginal Douche".vaginal irrigation

Thomas’ Retroflexion Pessary is narrower in proportion to its length, while the greater bow is enlarged to a bulb-like form. It enjoyed great popularity and as such was manufactured in a great variety of sizes. Comprised of hard rubber because of its lightness and the high polish that may be given it. The shape can be adjusted by covering the device in petrolatum and heating it with a spirit lamp or immersing it in boiling water. Manufactured in three sizes, and could be combined with a cup and stem external support. See Allen & Hanburys Gynaecological instruments catalogue, page 707.Two moulded black pessaries, Thomas retroflexion type. Made of black vulcanite. Narrower at one end.pessary, intrauterine device

This postcard was possible one that was sent to Florence Iggsten by her father when she was quite young and visiting Melbourne (judging from the comment about her ride on 'Jumbo')Black and white postcard showing a photograph of the buildings, structures and mullock heap at the Great Southern Gold Mine.Written in ink at the bottom of the photo: "Great Southern Gold Mine -- Rutherglen" On back of card is written a message to "My darling daughter" from "Daddy" In top right corner where stamp would usually go is an oval rubber stamp: "District Agent, Rutherglen. G.A. Iggsten"great southern, gold mines, gold mining, iggsten family

Blue print for shopping arcade at 147 Whitehorse Road, Ringwood, for Ringwood Investments Pty. Ltd. Rubber stamped on back and signed off by Borough of Ringwood Building Surveyor 24/5/1955, "Approved subject to Building Regulations and Bye-Laws." Architect for the project was P.E. Jorgensen, Collins House, 360 Collins Street, Melbourne.

Sepia print of board of workmen, perhaps at mine site. 56 males, large pipes on stand ( retort ? ) Crane ? In background ( possibly a gantry ) lengths of smaller pipes in foreground, also wooden posts ? RHSV Victoria, Bendigo Branch' in circular rubber stamp. On back in pencil 'R.A. Anderson /Bendigo' ' From J. Malloy 7/72'organization, business, mine site

Black and white photograph of well dressed group of males and females in front of trees. Men in suits with ladies in long frocks and large decorated hats and parasols. Inscriptions: on back - 'From Mrs Lowndes, McIvor Road', '1900-1905'. Rubber stamp 'WH Robinson, Photographer, Mundy St., Bendigo', circular stamp RHSV, Bendigo Branch.person, group

Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated the obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period. 'Horrocks' saline infusion apparatus. Consists of white, metal lidded oval shaped case [169.1], containing a gauze insert, a glass intravenous drip chamber [169.2], straight intravenous needle [169.3], wire insert for the needle [169.4] and rubber tubing [169.5]. Inscribed inside box, "Down Bros., St Thomas Street, Borough of London."hydration

The Refreshment Services Branch was established in 1920, and initially focused on providing station-based refreshment rooms and the dining car service. Its scope expanded to include diverse activities such as stall rental; sales of advertising space on railways infrastructure; laundry services; operation of a hair-dressing salon, a bakery, a butchery and a poultry farm; and the management of the chalet guesthouse at Mt Buffalo. The majority of staff worked in refreshment rooms and dining cars, both of which were a popular feature of the railway service. Previous to 1920 refreshment services had been provided by contractors, but after many complaints the Department decided to provide a standardised service across the system. It grew quickly: five years after it was established the Branch employed approximately 500 staff. Station refreshment facilities ranged from elaborate dining rooms to decorated push-carts. They were staffed predominately by women, who provided everything from a cup of tea to a three course meal. Most refreshment room services were closed in the 1970s. Reference from : Fielding, K. (2012) Victorian Railways - Refreshment Services Branch in Museums Victoria Collections http://collections.museumvictoria.com.au/articles/11470Historic - Replica of a a Victorian Railways Refreshment Services Serving Trolley used on Puffing Billy Railway Replica large wooden serving cart with fitted wooden cabinet featuring sliding glass doors and one glass shelf. Cart has chrome handles, two wooden shelves, a wooden drawer with chrome handle and a small chalkboard adhered to end. Cart has four small black rubber and metal wheels and a metal foot brake.puffing billy, serving trolley, replica, dining cart, refreshment services, victorian railways

Track cycle won by Jack Phillips 1929 in the Melbourne - Ballarat - Geelong - Melbourne Road Race. This was the first open road race won by a Geelong Amateur Cyclist. The Amateur Cycling Club was formed in 1929. This bike was restored by Ken Dickie who did his apprenticeship in fine line restorations and the painting was by Fred Cook. Hand grips by Harry Clarke. They used photographs from Jack Phillips of the original bike to restore the bike to its original colours and appearance.Track cycle one by Jack Phillips - the first of the big open road races won by an amateur.Restored Malvern Start Road Bike from 1929. Painted in red with the words Malvern Star highlighted in white on a blue background on the frame. The stem features two silver stars on a blue background. Single speed with wooden wheel rims. It has a leather saddle and rubber hand grips (formerly used as gas masks in WWI)"Malvern Star"jack phillips; geelong amateur cycling club; malvern star; geelong cycling club; 1929;

Demonstrates aspects of Ballarat's Tramway operations by the SEC in noting the days a person was Late arriving for work. Has a strong association with the SEC and tram operations in Ballarat.Rubber stamp and wood stamp base for stamping rosters and/or time sheets with the word "LATE." to indicate when a person signed on late, or after his rostered time expected. Would have had his pay adjusted.. Comprises a varnished shaped wooden section, cut from a preformed strip with a drawing pin to indicate the top of the stamp. trams, tramways, sec, rosters, times, crews

A Sportcraft Ambassador tennis racquet, with open throat, fibreglass cross-lamination, ribbon whipping around shaft, and leather handle grip with X-formation perforations. Model name features across base of head. Sportcraft logo features along shaft. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Fibreglass, Rubbertennis

6D/644