This bottle holds one imperial pint. The manufacturer John Sutherland & Sons began production in Melbourne in 1885 and ended production in the 1970s. This bottle was made with a 3 piece mould. 2 pieces for the bottle proper and a third for the base. The side mould seams extend right through the lip, so this was not applied separately. The type of A G M mark on the bottom indicates it was made during the 1929 to 1933 period. It displays some stretching in the glass on the neck as it was taken from the moulds whilst still somewhat plastic, not having cooled enough. Overall the bottle in excellent condition.Clear glass bottle, embossed inscription, AGM mark on base.Embossed inscription: "John Sutherland & Sons Pty Ltd Melbourne Pickles"glass bottles, john sutherland & sons, pickle bottles

This particular glass bowl was a favoured ornamental type room "brightener" in the early 1900's. Although referred to as a "nappy bowl" this bowl has not the capacity for nappies but for nappy pins. This was a period in time before the nappy ties and instant nappy covers.This has relevance as an object that was both practical for the early 1900's nappy changes and provided some visual relief for any "drab" household ambience, especial in rural homes. The early to mid 1900's, rural households, on the whole, were more practical and not designed for entertainment. This reflected the more serious nature which were governed by aspects of providing a living from the land and unreliable weather. By placing visually attractive ornaments within various rooms (lounge/living rooms) the transformation from a stark external environment to a more warm and friendly area was achieved. This dark amber (Marigold) carnival glass 5 inch nappy bowl has a Kookaburra press molded base and wattle blossom with waratah and flannel flower sides. The bowl has a twelve scolloped rippled rim. Initially this type of bowl was reintroduced(from Roman times) into the 19th and 20th Century (modern age) by a United States glass manufacturer..Manufacturer's mark at the base illegible nappy bowls, nappy pin holders, visual mood changing ornaments

Small feeding bottles were used to feed milk to newborns or juice to older infants. Crown Crystal Glass were an Australian glass manufacturer, who were the Australian vendors for Pyrex from 1926, importing from the UK. In 1961, Crown Crystal Glass began manufacturing their own Pyrex, under the name Agee Pyrex (until 1963), Crown Agee Pyrex (late 1960s), Crown Pyrex (1970s), Crown Ovenware (1970s) and Pyrex Ovenware (late 1970s until early 1980s). Source: That Retro Piece, 'PYREX | Australian', https://thatretropiece.com/collections/pyrex-australian "The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment." Source: Warrnambool and District Historical Society Inc., 'Bottle, The Perfect Agee Feeding Bottle, Mid 20th century', https://victoriancollections.net.au/items/592fe71ad0cdd520341b3954Small clear glass bottle with a short narrow neck. Imprinted with calibrations for ounces (0-4) and millilitres (0-120). Embossed on side of bottle: "Agee/ PYREX/ Feeder".infant feeding, infant care

This glass is a souvenir of the 75th anniversary of the founding of Warrnambool Technical School. This school was established in Timor Street Warrnambool in 1913 and was relocated to Caramut Street Warrnambool in the 1970s. The Timor Street site now has the campus of South West TAFE (Technical and Further Education). Warrnambool Technical School in Caramut Road was re-named Brauer College in 1990 to reflect the change to a broad secondary curriculum embracing both technical and general educational subjects. The name also honours Dr Alfred Brauer, a well-known Warrnambool doctor with a strong involvement in local schools. This glass is of interest as a memento of the 75th anniversary of the founding of Warrnambool Technical School, today known as Brauer College.This is a glass tumbler with a heavy base and a gold rim around the top of the glass. The sides of the glass have a gold image of a school, the school logo (a seahorse) and some gold printing. Warrnambool Technical School 1913-1988warrnambool technical school, history of warrnambool

The World War One Memorial Stained glass windows in the Barkly Street Uniting Church resulted from a request made in 1919 by the Barkly Street Young Men's Club to be given permission to raise money to pay for the project. The window was designed by Fisher Co. Pty Ltd, and was unveiled by a former army chaplain - either Rev. J.A. Gaunt or Rev. Bladen on the 14th March 1920. The total cost of the windows was 171 pounds 10 shillings. The window cost 150pounds, the window was fixed into position for 15 pounds, and three wire screens cost 6 pounds 10 shillings.Digital Photographs of the World War One memorial stained glass windows in the Barkly Street Uniting Church, Ballarat East.Repousse World War One tablet: 1914-1919 For God, King and Country The windows above have been erected as a memorial to the heroic lads of this school and church who fell in the Great War. Brittain, H.O. Butcher, J.C. Cornish, H. R. MM (Richard) Eady, James Arthur Edmends, William H. Ferguson, F. Farrar, A.Z. Gist, C.H. Gates, Stanley C. Grave, Howard B. Hughes, Arthur W. Hughes, George A.C. Jones, William Stanley (Stan) Marshall, Robert R. McConnell, A.R. (Ralph) Muller, A.V. Polkinghorne, E.C. (Clifford) Ridgwell, Herbert R. Sansum, Arthur H. Smith, Alfred G. Tait, Robert E. Tait, Lawrence (Laurie) Veal, Thomas P. Vincent, Leslie A.barkly street uniting church, barkly steet methodist church, barkly street weseyan church, j.a. gaunt, bladen, stained glass, soldier, world war, world war one, mmm

"ST. PETER'S CHURCH, DAYLESFORD Last Sunday his Grace the Archbishop confirmed a large number of children at St. Peter's Church, Daylesford. His Grace was assisted by Rev. J. J. Malone, P.P. The congregation included a large number of worshipers from outside districts. A short address delivered by the Archbishop was attentively listened to, and many were the expressions of congratulation extended to his Grace upon his recovery from the indisposition which had incapacitated him from active work recently. At the conclusion of Confirmation the children were treated to refreshments on the lawn in front of the presbytery A large number of parishioners dined with Fr. Malone, and the Archbishop renewed former acquaintanceships. In the evening a mission was opened by the Rev. J. O'Brien and Rev. J. Brown, of the Redemptorist Order. The mission will be concluded on Sunday next. The exercises have been well attended. The interior of this beautiful Gothic church has recently undergone complete decoration, and one of the features that have, received special attention is the stained-glass. The windows consist of eight- two-light with trefoil piece of tracery, and in each is designed one of the following figures:—St, Francis of Assisi, St. Francis Xavier, St. Augustine, St. Monica, St. Stanislaus, St. Aloysius, Our Lady, St. Joseph, St. Patrick, St. Bridget, St. Agnes, 'St. Rose of Lima, St. Ignatius, St. Vincent de Paul, St. Alplionsus Liguori, St. Thomas Aquinas. The figures are set, in medallions formed with richly designed Gothic ornament in the form of crockets surmounted by a cross and crown, while in the tracery immediately above the windows is a monogram of the names of the saints. The figures are richly coloured in glorious antique glass, with the ornamental detail in lovely mellow tones of old gold and pale yellow stains. The whole effect is rich and at the same time restrained in colour. At the base of each window is written the name of the donor. The whole of the work was designed and executed by Messrs. Brooks, Robinson and Co. limited, at their stained-glass studios, Elizabeth-street, Melbourne. The scheme is an original treatment, but at the same time strictly orthodox and Gothic in style. One feature of the work which must be apparent to those who are interested in stained-glass decoration is the maximum effect obtained with a minimum of expenditure." (Melbourne Advocate, 4 December 1909) A number of coloured photographs of the stained glass windows from the interior of St Peter's Catholic Church, Daylesford. The photographs were taken on the day of the 150th anniversary celebrations.brooks, robinson and co, stained glass, st peter's daylesford, church, daylesford, st alplionsus liguori, st thomas aquinas, religion, st agnes, st rose

This glass is a souvenir of the awarding to Warrnambool of the title of Victoria’s Premier Town for the period 1979 to 1982. The Premier Town Awards were given by the State Government to the town or city that best protected and enhanced its environment. Factors contributing to this included waste management, litter control and environmental improvements. Warrnambool won the award in 1958, 1979-82 and 1988-1991. This souvenir glass is kept as an example of the type of souvenir sold on the occasion of Warrnambool’s winning the Premier Town Award for 1979 to 1982. It will be useful for display. This is a drinking glass in the form of a goblet with a circular base, a thin stem and a top with gold edging around the rim. On the side of the glass there is a Warrnambool logo and wording in gold lettering. ‘Warrnambool Premier Town ‘ ‘1979-82’ ‘Victoria Australia’ premier town awards, history of warrnambool

Stephens Bros. of Wodonga were established c1938, having taken over the aerated water and drinks business previously operated by Messrs. E. Bartel and E. Clark. Bartel and Clark had purchased S. Mason Cordial Company from Samuel Mason Jr. in 1920. Samuel Mason Sr. began a bakery and aerated water company c1857. Stephens Brothers was operated by Lindsay, Donald and William Stephens. In 1947 they manufactured their own cement bricks to build a new factory in High Street, Wodonga. Over time they operated under various names including the Wodonga Cordial Company and Belvoir Wodonga Cordial Company. In 1938 their output of aerated waters was 100 dozen bottles a day but by 1948 that had doubled. In 1949 they also established a wood yard at their High Street premises to provide additional income during the slower winter months. In 1966 the company was purchased by the Tarax Ale Brewing Co. with Lindsay Stephens staying on as Company Manager.These artefacts has local significance as they are representative of a well-known Wodonga manufacturing business.2 bottles for beverages produced by Stephens Bros., Wodonga. One is a taller brown bottle bearing the label of Stephen Bros Old Style Hop Beer. The second clear glass bottle is smaller and has the brand name embossed into the bottle.Label on brown bottle : "STEPHENS BROS/ WODONGA :: PHONE 39 /OLD STYLE / HOP BEER/ PRESERVATIVE ADDED" Embossed on clear glass bottle : On side: STEPHENS BROS WODONGA Around base of clear bottle: "THIS BOTTLE ALWAYS REMAINS THE PROPERTY OF STEPHENS BROS. WODONGA"stephens bros wodonga, wodonga cordial company, cordial companies wodonga, belvoir drinks wodonga, aerated drinks, hop beer

Glass pharmacy bottle with glass stopper. Clear glass with small corner remnant of original label.The letters and numbers L275 and I20 tamped into base.

Peter Glass (Arthur William) Artist A.I.L.A. 28.8.1917 - 28.12.1997 And his loving wife Cecile Madeleine 23.2.1927 - 6.2.2006 Rest In Peaceeltham cemetery, gravestones, memorials, cecile madeleine glass, peter glass

Arthur William Glass known as Peter was born August 28, 1917. During the 1930s, Peter Glass and a young Graeme Bell were studying painting under Max Meldrum. Graeme Bell at that time was undecided whether to devote his life to music or painting. In 1938, inspired by what they had seen at 'Montsalvat', Peter Glass along with Graeme and Roger Bell (whose names were to become internationally known as the leaders of Australia's most famous jazz band) agreed to purchase land at Eltham to build themselves a mud brick house. For some time, Eltham had been their chosen place for painting and sketching, but it was not until they visited the 'Jorgensen Colony', as it was then known, and saw the possibilities of building in earth, that they decided to establish a permanent base in Eltham. In July, the three of them bought a few acres of land at the top of John Street and started making mud bricks for a proposed sixty square sized house. Following the Second World War, Peter Glass returned in 1946 to live permanently in Eltham. He resumed work on building of the adobe house which he had commenced before the war. During some years spent in England and France he married a French girl and on returning to Eltham he built another adobe house in which he lived with his wife, Cecile Madeleine, and two children, Julian and Marie-Luce on land adjoining the original house. Peter Glass died in December 1997 aged 80, his wife Cecile in 2006, aged 79. They are memorialised in Eltham Cemetery. Much of the inspiration for his landscape painting comes from the Eltham bush and the Yarra flowing through it.oil on chipboard 33 x 40.5 x 1.0 cm Signed 'Peter Glass in red paint lower right of centre Evidence of some paint rub-off at edges from previous frame mounting (frame removed).Reverse side painted in pale yellow cream and inscribed: 'Summer Landscape - 1968 Kangaroo Ground' in black paint1968, arthur william glass, artwork, kangaroo ground, paintings, peter glass

Manufacturer in StawellGlass F & A Ormston Soda Water Bottle with glass Marble Stopper. Glass has Green Tinge.F & A Ormston Stawell Soda Waterstawell

Plates such as this were a souvenir of a trip or holiday. Greensborough was a popular picnic destination in the mid 20th Century and this style of souvenir would have been a popular purchase. The Greensborough pool in the Plenty River was opened in the 1930s, so the plate was manufactured after this.Photograph laid on glass dish, cut glass edge."Wading Pool Greensborough" overlaid on photograph. Price written on back "2/9"greensborough swimming pool, plenty river, wading pool greensborough

This glass milk bottle was manufactured and used mid 1800's (1834 Victorian dairy industry was founded) to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the large volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36"This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against sunlight penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it 6/33 and next to this "ONE PINT" and under this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head was manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle which contained milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "3"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/36" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "15" glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a half pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them and this tint was to protect the contents from sun damage. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the top half of this bottle is "MILK" and opposite "HALF PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base is "2 M" underneath this "8/11" and underneath is "ISM -169"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded), until the time that cheaper containers were invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle, to contain milk, required its thickness because of the extensive handling (man and machine) before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle is a circle within it "6/35" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "20"milk, dairy, glass bottle

Tall clear amber glass hexagonal shaped bottle for screw top. Three plain sides, the widest with an embossed numeral near the base, two sides with embossed 'x' stipple pattern either side of a panel with embossed text. Text, numerals and monogram embossed on base. Numeral '7' near base of plain side. Two panels with 'x' stipple pattern, either side of panel with text 'NOT TO BE TAKEN'. On base Australian Glass manufacturers monogram above 'F1073' with three other indistinct making to the right.amber glass

This magic lantern or slide projector was used to project glass slides on to a screen The magic lantern was the chief visual entertainment for the public before the introduction of the moving picture and consequent cinema entertainment. This one probably dates from about 1915 but its provenance is not known.This magic lantern is an important and interesting object as it shows us the way people in the early 20th century were entertained. The few people who owned this type of projector would give public showings of slides of people and scenes and sometimes raise money for a charitable cause in this way. This is a glass slide projector or magic lantern with a rectangular metal lantern body partly open at the back. The back has a top section that is attached with a metal hinge and lifts up and outwards. The lantern base also has a side opening with a metal knob for opening and a metal panel with a blue glass inset. Inside the lantern body is the lamp and an electric cord (the illuminant system may have originally been fuelled by paraffin or another oil burner). On top of the lantern body is a smaller rectangular metal box in two sections. This can be removed. The illuminant system is brass and slides out. It has two mechanisms for adjusting the focus and a covering over the lens opening which can be pulled up. There is also a wooden slide holder which can be pulled in and out of the projector. ‘W.B. British Made’ social history, history of warrnambool, glass slide projector

Small clear rectangular glass bottle. Glass stopper inside bottle.H.A. Woolnough, 51 Swanston Street Melbourne

Kerr's James operated in Buninyong. Internet and Trove searches have not revealed any details on when the business operated. More local research needed.Glass bottle with lid produced for Kerr's Jams, Buninyong. Cylindrical glass jar with glass stopper. the bottle neck and rim have been broken and some parts are missing. Glass has a green tinge. Kerr's Jams Buninyong. A large 'M' is imprinted on the base. containers, jars, kerr's jams

This glass has been purchased by a visitor to Warrnambool as a utilitarian souvenir of the visit. Tourism has been an important business in Warrnambool for over100 years. In the late 19th century Warrnambool was promoted as a spa resort with its mild climate, coastal swimming and hot and cold seawater baths. Today the visitors come in winter to see the Southern Right whales at Logans Beach and other coastal areas and in summer they come for a beach holiday. This glass is retained as an example of the mid 20th century tourist souvenirs obtainable in Warrnambool. This is a small glass tumbler, oval-shaped. The rim and the base are encircled by thick gold bands with smaller gold bands underneath the rim and above the bottom gold band. The word ‘Warrnambool’ is painted in gold on the side of the glassWarrnambooltourism in warrnambool, history of warrnambool

Manufacturer in StawellClear Glass F & A Ormston Soda Water Bottle with glass Marble Stopper. F & A Ormston Stawell Soda Waterstawell

Found in Verdoorn's grocery store by Jane Verdoorn.Clear glass.eye wash glass

Hardcovermodern architecture, glass, walsh st library

In 1938, Arthur William Glass (known as Peter Glass) was studying painting under Max Meldrum. Much of their inspiration came from the Eltham bush and the nearby Yarra River. With his friends jazz musicians Graeme and Roger Bell, Peter bought land at the top of John Street: enchanted by Montsalvat, he had the objective of building a mud-brick house. War intervened, but then in 1948 he began working for Alistair Knox as a carpenter and mud-brick builder. By then, Peter had married, necessitating a larger house, which he built with help from Alistair Knox. As a trained architectural draftsman, Peter later progressed to working for Alistair in that role, eventually running the drafting office during the 1960s. He was deeply involved in the foundation of the Australian Institute of Landscape Architects, and went on to design many gardens, some in partnership with Alistair Knox and Gordon Ford. He died in 1997 and is buried in Eltham Cemetery with his wife Cecile. Peter Glass (Arthur William) Artist A.I.L.A. 28.8.1917 - 28.12.1997 and his loving wife Cecile Madeleine 23.2.1927 - 6.2.2006 Rest In PeaceBorn Digitaleltham cemetery, gravestones, heritage excursion, cecile madeleine glass, peter glass

Steel and glass pocket folding magnifying glass. The maker's name DEPOSE and a cockerel stamped into the handle. The maker's name DEPOSE and a cockerel stamped into the handle.